Floorstanding Speakers

The Aelite Series are AE’s affordable high-end audio range, utilising modern design techniques in drive unit technology and cabinet enclosure construction.Following with AE tradition, lightweight high-efficiency alloy cones housed in die-cast aluminium chassis are used for the mid/ bass driver units, providing a fast, tight bass response with optimum detail and clarity.The Aelite 3 is the flagship of the Aelite range and utilises the same high quality HF unit from the rest of the Aelite range, complimented by a 110mm midrange unit and two powerful 125mm bass units. The result is a loudspeaker that will give an exceptional range of performance from the most detailed violin to the largest movie explosion.

The tweeter, mid and bass drivers on the AE520 are constructed from carbon fibre, for a lightweight yet stiff cone, the ideal properties for a speaker driver. Carbon fibre is better damped than other hard dome tweeter materials, providing a lightning fast response combined with a natural sound. The aluminium WDT waveguide on the tweeter allows for optimum dispersion, and further reduces vibrations being passed on to the tweeter.The AE520 speakers use two 125mm mid drivers, alongside three 125mm bass drivers, incorporating new oversized 35mm voice coils with very high motor force, to produce a dynamic yet highly controlled bass response. The mid woofers have an optimised motor and suspension system, ensuring mid-range definition and low distortion. The lightweight carbon fibre cone increases musical clarity, letting you hear your music with startling neutrality.With a Mid Tweeter Mid (MTM) driver layout, with three lower bass drivers, the Acoustic Energy floorstanders utilise a 3-way crossover with high voltage polypropylene film capacitors creating optimum dispersion through a smaller acoustic source size. The AE520 cabinets are constructed of new Resonance Suppression Composite, evolved from Acoustic Energy’s Reference Series, with constrained layer composite to reduce unwanted vibrations which might colour the sound. Finished in high gloss black, white or walnut veneer, the clean lines of these speakers will suit any interior style.Acoustic Energy AE520 Floorstanding Speakers featuresCarbon Fibre drivers for a lightweight yet stiff materialFast response and damped 25mm tweeterAluminium WDT waveguide provides optimum dispersion of high frequenciesTwo 125mm carbon fibre mid driversThree 125mm carbon fibre bass drivers35mm oversized voice coils produce high dynamic range with controlled bass responseMid Tweeter Mid/bass driver layout with 3-way crossoverResonance Suppression Composite cabinets reduce vibrations and colour

The tweeter, mid and bass drivers on the AE520 are constructed from carbon fibre, for a lightweight yet stiff cone, the ideal properties for a speaker driver. Carbon fibre is better damped than other hard dome tweeter materials, providing a lightning fast response combined with a natural sound. The aluminium WDT waveguide on the tweeter allows for optimum dispersion, and further reduces vibrations being passed on to the tweeter.The AE520 speakers use two 125mm mid drivers, alongside three 125mm bass drivers, incorporating new oversized 35mm voice coils with very high motor force, to produce a dynamic yet highly controlled bass response. The mid woofers have an optimised motor and suspension system, ensuring mid-range definition and low distortion. The lightweight carbon fibre cone increases musical clarity, letting you hear your music with startling neutrality.With a Mid Tweeter Mid (MTM) driver layout, with three lower bass drivers, the Acoustic Energy floorstanders utilise a 3-way crossover with high voltage polypropylene film capacitors creating optimum dispersion through a smaller acoustic source size. The AE520 cabinets are constructed of new Resonance Suppression Composite, evolved from Acoustic Energy’s Reference Series, with constrained layer composite to reduce unwanted vibrations which might colour the sound. Finished in high gloss black, white or walnut veneer, the clean lines of these speakers will suit any interior style.Acoustic Energy AE520 Floorstanding Speakers featuresCarbon Fibre drivers for a lightweight yet stiff materialFast response and damped 25mm tweeterAluminium WDT waveguide provides optimum dispersion of high frequenciesTwo 125mm carbon fibre mid driversThree 125mm carbon fibre bass drivers35mm oversized voice coils produce high dynamic range with controlled bass responseMid Tweeter Mid/bass driver layout with 3-way crossoverResonance Suppression Composite cabinets reduce vibrations and colour

The tweeter, mid and bass drivers on the AE520 are constructed from carbon fibre, for a lightweight yet stiff cone, the ideal properties for a speaker driver. Carbon fibre is better damped than other hard dome tweeter materials, providing a lightning fast response combined with a natural sound. The aluminium WDT waveguide on the tweeter allows for optimum dispersion, and further reduces vibrations being passed on to the tweeter.The AE520 speakers use two 125mm mid drivers, alongside three 125mm bass drivers, incorporating new oversized 35mm voice coils with very high motor force, to produce a dynamic yet highly controlled bass response. The mid woofers have an optimised motor and suspension system, ensuring mid-range definition and low distortion. The lightweight carbon fibre cone increases musical clarity, letting you hear your music with startling neutrality.With a Mid Tweeter Mid (MTM) driver layout, with three lower bass drivers, the Acoustic Energy floorstanders utilise a 3-way crossover with high voltage polypropylene film capacitors creating optimum dispersion through a smaller acoustic source size. The AE520 cabinets are constructed of new Resonance Suppression Composite, evolved from Acoustic Energy’s Reference Series, with constrained layer composite to reduce unwanted vibrations which might colour the sound. Finished in high gloss black, white or walnut veneer, the clean lines of these speakers will suit any interior style.Acoustic Energy AE520 Floorstanding Speakers featuresCarbon Fibre drivers for a lightweight yet stiff materialFast response and damped 25mm tweeterAluminium WDT waveguide provides optimum dispersion of high frequenciesTwo 125mm carbon fibre mid driversThree 125mm carbon fibre bass drivers35mm oversized voice coils produce high dynamic range with controlled bass responseMid Tweeter Mid/bass driver layout with 3-way crossoverResonance Suppression Composite cabinets reduce vibrations and colour

The handsome AE509 is the more living room-friendly model of the two floorstanding loudspeaker designs in Acoustic Energy’s flagship 500 series. Showcased at The Bristol Hi-Fi Show in 2019, the top-tier series introduces carbon fibre drivers to the Gloucestershire-based loudspeaker specialist’s continuously evolving portfolio.  The company believes that the lightweight material delivers a step up on pistonic power and precision over its ceramic/aluminium drivers. Its low weight to strength ratio brings improved driver self-damping and the material has been used in mid and bass driver designs elsewhere. Acoustic Energy is one of a few to also use it in the design of its 25mm dome tweeter. This decision presumably helps to achieve cohesive voicing between the tweeter and the dual 125mm drivers in the AE509’s two-way, mid-tweeter-mid/bass (MTM) configuration.  Super structureAt the time of launch, 500 Series designer and managing director Matt Spandl commented: “We have spent considerable time developing the carbon fibre transducers and perfecting our unique cabinet technology. The results have been proven and I’m confident we’ve developed a new flagship range with exceptional sound, build and value.” The new series introduced the AE500 standmount priced at £1,050 (£1,250 with dedicated stands) and AE509 floorstander at £2,400. The range has since been bolstered by the AE520 floorstander introduced last year priced at £3,650 – an imposing 1.13m tall six-driver arrangement in a three-way configuration offering greater power handling. Lust for lifeThe AE509 claims 175W power handling and is suitable for medium to large-sized listening spaces. It feels understated in my living room and I love the eye-catching lustre of the black high-gloss finish and the way the slim, modern styling contrasts gracefully with the decor of my home. White piano gloss and American walnut wood veneer finishes are also available.  Texture and lightAcoustic Energy is one of the first to choose carbon fibre as the material for a dome tweeterRemoving the cloth grille held in place by magnets hidden beneath the surface of the front baffle reveals twin 125mm drivers at the top section of the cabinet. Each driver has a 35mm voice coil and a metal dust cap. One driver is located above the 25mm tweeter (with surrounding waveguide), and the other below. The texture of the carbon fibre cones shimmer under my living room lights and the overall aesthetic is one of understatement, with no flashy accents to unbalance the speaker’s style.  The 18mm-thick cabinet is a three-layer composite sandwich construction comprising MDF and rubber. The resonance reducing technique evolved from the company’s Reference Series and requires less internal bracing. A bass reflex slot port sits at the top of the rear baffle helping to make the AE509 unfussy about placement, making it flexible enough to be sited within close proximity to boundary walls.  The crossover circuitry is housed in a carefully tuned separate 3l box section at the base of the cabinet. The AE509’s frequency response is quoted at 32Hz – 28kHz (+/- 6dB) with the handover between mid/bass and tweeter drivers at 2.9kHz. Speaker impedance is rated at 6ohm. Standing strong The aluminium bracing at the base of the cabinet incorporates four large spikes to aid floor decoupling and reduce room interaction. This also widens the speaker’s footprint to help stabilise the cabinet’s slightly top-heavy proportions.  

The handsome AE509 is the more living room-friendly model of the two floorstanding loudspeaker designs in Acoustic Energy’s flagship 500 series. Showcased at The Bristol Hi-Fi Show in 2019, the top-tier series introduces carbon fibre drivers to the Gloucestershire-based loudspeaker specialist’s continuously evolving portfolio.  The company believes that the lightweight material delivers a step up on pistonic power and precision over its ceramic/aluminium drivers. Its low weight to strength ratio brings improved driver self-damping and the material has been used in mid and bass driver designs elsewhere. Acoustic Energy is one of a few to also use it in the design of its 25mm dome tweeter. This decision presumably helps to achieve cohesive voicing between the tweeter and the dual 125mm drivers in the AE509’s two-way, mid-tweeter-mid/bass (MTM) configuration.  Super structureAt the time of launch, 500 Series designer and managing director Matt Spandl commented: “We have spent considerable time developing the carbon fibre transducers and perfecting our unique cabinet technology. The results have been proven and I’m confident we’ve developed a new flagship range with exceptional sound, build and value.” The new series introduced the AE500 standmount priced at £1,050 (£1,250 with dedicated stands) and AE509 floorstander at £2,400. The range has since been bolstered by the AE520 floorstander introduced last year priced at £3,650 – an imposing 1.13m tall six-driver arrangement in a three-way configuration offering greater power handling. Lust for lifeThe AE509 claims 175W power handling and is suitable for medium to large-sized listening spaces. It feels understated in my living room and I love the eye-catching lustre of the black high-gloss finish and the way the slim, modern styling contrasts gracefully with the decor of my home. White piano gloss and American walnut wood veneer finishes are also available.  Texture and lightAcoustic Energy is one of the first to choose carbon fibre as the material for a dome tweeterRemoving the cloth grille held in place by magnets hidden beneath the surface of the front baffle reveals twin 125mm drivers at the top section of the cabinet. Each driver has a 35mm voice coil and a metal dust cap. One driver is located above the 25mm tweeter (with surrounding waveguide), and the other below. The texture of the carbon fibre cones shimmer under my living room lights and the overall aesthetic is one of understatement, with no flashy accents to unbalance the speaker’s style.  The 18mm-thick cabinet is a three-layer composite sandwich construction comprising MDF and rubber. The resonance reducing technique evolved from the company’s Reference Series and requires less internal bracing. A bass reflex slot port sits at the top of the rear baffle helping to make the AE509 unfussy about placement, making it flexible enough to be sited within close proximity to boundary walls.  The crossover circuitry is housed in a carefully tuned separate 3l box section at the base of the cabinet. The AE509’s frequency response is quoted at 32Hz – 28kHz (+/- 6dB) with the handover between mid/bass and tweeter drivers at 2.9kHz. Speaker impedance is rated at 6ohm. Standing strong The aluminium bracing at the base of the cabinet incorporates four large spikes to aid floor decoupling and reduce room interaction. This also widens the speaker’s footprint to help stabilise the cabinet’s slightly top-heavy proportions.  

The handsome AE509 is the more living room-friendly model of the two floorstanding loudspeaker designs in Acoustic Energy’s flagship 500 series. Showcased at The Bristol Hi-Fi Show in 2019, the top-tier series introduces carbon fibre drivers to the Gloucestershire-based loudspeaker specialist’s continuously evolving portfolio.  The company believes that the lightweight material delivers a step up on pistonic power and precision over its ceramic/aluminium drivers. Its low weight to strength ratio brings improved driver self-damping and the material has been used in mid and bass driver designs elsewhere. Acoustic Energy is one of a few to also use it in the design of its 25mm dome tweeter. This decision presumably helps to achieve cohesive voicing between the tweeter and the dual 125mm drivers in the AE509’s two-way, mid-tweeter-mid/bass (MTM) configuration.  Super structureAt the time of launch, 500 Series designer and managing director Matt Spandl commented: “We have spent considerable time developing the carbon fibre transducers and perfecting our unique cabinet technology. The results have been proven and I’m confident we’ve developed a new flagship range with exceptional sound, build and value.” The new series introduced the AE500 standmount priced at £1,050 (£1,250 with dedicated stands) and AE509 floorstander at £2,400. The range has since been bolstered by the AE520 floorstander introduced last year priced at £3,650 – an imposing 1.13m tall six-driver arrangement in a three-way configuration offering greater power handling. Lust for lifeThe AE509 claims 175W power handling and is suitable for medium to large-sized listening spaces. It feels understated in my living room and I love the eye-catching lustre of the black high-gloss finish and the way the slim, modern styling contrasts gracefully with the decor of my home. White piano gloss and American walnut wood veneer finishes are also available.  Texture and lightAcoustic Energy is one of the first to choose carbon fibre as the material for a dome tweeterRemoving the cloth grille held in place by magnets hidden beneath the surface of the front baffle reveals twin 125mm drivers at the top section of the cabinet. Each driver has a 35mm voice coil and a metal dust cap. One driver is located above the 25mm tweeter (with surrounding waveguide), and the other below. The texture of the carbon fibre cones shimmer under my living room lights and the overall aesthetic is one of understatement, with no flashy accents to unbalance the speaker’s style.  The 18mm-thick cabinet is a three-layer composite sandwich construction comprising MDF and rubber. The resonance reducing technique evolved from the company’s Reference Series and requires less internal bracing. A bass reflex slot port sits at the top of the rear baffle helping to make the AE509 unfussy about placement, making it flexible enough to be sited within close proximity to boundary walls.  The crossover circuitry is housed in a carefully tuned separate 3l box section at the base of the cabinet. The AE509’s frequency response is quoted at 32Hz – 28kHz (+/- 6dB) with the handover between mid/bass and tweeter drivers at 2.9kHz. Speaker impedance is rated at 6ohm. Standing strong The aluminium bracing at the base of the cabinet incorporates four large spikes to aid floor decoupling and reduce room interaction. This also widens the speaker’s footprint to help stabilise the cabinet’s slightly top-heavy proportions.  

A full-range 3-way model offering huge power handling and extremely low thermal compression, while remaining detailed, accurate and evenly balanced with all musical genres. The “3’s” also form the main front speakers in the Radiance Cinema system, matching perfectly with the Centre, Sub and “1’s” to form a formidable 5.1 package (or any configuration you may prefer!)Engineered by AE to give exceptional performance with music or film.

Ten years in developmentThe Rega AYA is a floorstanding speaker that results from a ten-year effort by Rega's design team, led by the company's founder Roy Gandy. The goal was a detailed, balanced sound that serves every kind of music. It uses hand-made Rega-designed drivers, the ZRR tweeter and a new crossover, while the sculpted cabinet and stand give the impression that it floats above the floor.A bold aestheticThe Steel Grey finish combines a steel grey front panel with a dark grey GRC cabinet. Grilles are optional, attach magnetically and are sold separately. Because GRC is a natural material, slight variations in shade and tiny pinholes in the surface are normal and make every pair unique.Working with the systemRega recommends the AYA with the Elex, Elicit and Aethos amplifiers and with the Planar 2, 3, 6, 8 and 10 turntables. The AYA has received awards from Hi-Fi Choice (Recommended) and AV Forums (Highly Recommended). The price is for a pair of speakers.

Hear Things As They Are Meant To Be As much as the AE22 marks a return to roots for Acoustic Energy, it also marks a return to some fundamental engineering principles for nearfield monitors. In a market increasingly populated by monitors that deploy sophisticated digital electronics to provide peripheral functions, the AE22 deploys high value electronic and acoustic engineering to reproduce music more accurately and consistently in the studio environment. The AE22 is designed from the ground up to excel in the parameters that influence how accurately it presents what recording engineers need to hear, and

ACOUSTIC ENERGY 305 The 300 Series features multiple upgrades over the base 100 Series, all designed to improve both audio performance and aesthetics befitting its more premium status. The new bespoke drive units are designed in tandem to offer seamless tonal integration in addition to the benefits of low distortion and high power handling. The 28mm aluminum dome tweeter also features WDT Wide Dispersion™ technology, and a redesigned 130mm aluminum mid-bass driver uses an aluminum ceramic sandwich cone and long-throw motor system. The seamless cabinet enclosures feature an inert 18mm high density MDF material with proprietary internal support technology to reduce cabinet colour. They are finished in an attractive choice of piano-grade walnut, glossy black or white lacquer. The result is a high-quality package that delivers a refined, accurate and above all, enjoyable musical experience. Incorporating all the qualities Acoustic Energy is famous for… and designed for the love of music.

The AE103 is a front ported design that allows for easy room positioning.Behind its angled baffle and magnetic grilles, the AE 103 floorstanding loudspeaker is a front ported design that allows for close to wall placement if desired, making it easier and less fussy to fit within your decor. The result is a loudspeaker with the power and depth of a large floorstanding design, yet with a smaller overall size and more compact footprint than most stand mounted speakers.

The Platinum 300 3G is the flagship of the Platinum Series 3G, rated Class A by Stereophile, with in-room bass down to 17 Hz.Twin 8" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

The Platinum 300 3G is the flagship of the Platinum Series 3G, rated Class A by Stereophile, with in-room bass down to 17 Hz.Twin 8" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

The Platinum 300 3G is the flagship of the Platinum Series 3G, rated Class A by Stereophile, with in-room bass down to 17 Hz.Twin 8" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

The Platinum 200 3G is a three-way flagship floorstander for medium and large rooms.Twin 6" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

The Platinum 200 3G is a three-way flagship floorstander for medium and large rooms.Twin 6" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

The Platinum 200 3G is a three-way flagship floorstander for medium and large rooms.Twin 6" bass, a 4" RDT III mid, MPD III tweeter, aluminium frames and outrigger feet.

Τα Magnat Monitor S70 ειναι ζευγος ηχειων δαπεδου 3 δρομων, με 2x 6.5" woofers, 1x 6.5" midrange και 1x 1.1" silk dome tweeter. Ευαισθησια (sensitivity) 91db/w/m. Ικανοτητα προσληψης ισχυος 30 wrms - 380 wmax.Εγγυηση Αντιπροσωπειας. Δυνατοτητα δοσεων.The Monitor S 70 is the classic floorstanding speaker in the range. With two 170 woofers, and a midrange of the same size, it combines the desire for a lot of diaphragm space with a slim appearance at the same time. And the latter it really is. At an impressive 96 cm in height, it is barely wider than an A4 sheet at 21.5 cm.Towards the top, the 28 mm dome tweeter takes over, which most S-Line speakers can boast. The assembly with identical drivers ensures that you get homogeneous sound all around, even in complex multi-channel systems. By the way, the two basses guarantee fulminant low frequencies, the frequency spectrum ranges from 19 up to 38,000 Hz.With cabinet variants in black or walnut, the S 70 also has the right model for every style. The anthracite-colored baffle and the removable front cover made of acoustic fabric ensure a uniform appearance.Features3-way bass reflex floorstanding speakerEncapsulated and gold-plated connection terminalsNewly developed 28 mm tweeter with fabric composite dome tweeter, front panel with radiation-optimised sound path and powerful ferrite drive for excellent dynamicsUse as a hi-fi speaker or as a front speaker in the home cinema

Slim design, big soundThis elegant tower loudspeaker is slimmer and easier to accommodate than ever. Perfect for superlative sound in smaller spaces.A house for high frequenciesCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Slim design, big soundThis elegant tower loudspeaker is slimmer and easier to accommodate than ever. Perfect for superlative sound in smaller spaces.A house for high frequenciesCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Slim design, big soundThis elegant tower loudspeaker is slimmer and easier to accommodate than ever. Perfect for superlative sound in smaller spaces.A house for high frequenciesCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Room-filling realismIts new Tweeter-on-Top configuration and the revolutionary Biomimetic Suspension in its decoupled midrange drive unit combine to raise the 703 S3 to all-new heights of performance.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Room-filling realismIts new Tweeter-on-Top configuration and the revolutionary Biomimetic Suspension in its decoupled midrange drive unit combine to raise the 703 S3 to all-new heights of performance.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Room-filling realismIts new Tweeter-on-Top configuration and the revolutionary Biomimetic Suspension in its decoupled midrange drive unit combine to raise the 703 S3 to all-new heights of performance.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Goosebumps guaranteedOur flagship, the 702 S3, is a state-of-the-art tower speaker that defines new standards for performance in its class. If you want the best, this is it.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Goosebumps guaranteedOur flagship, the 702 S3, is a state-of-the-art tower speaker that defines new standards for performance in its class. If you want the best, this is it.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

Goosebumps guaranteedOur flagship, the 702 S3, is a state-of-the-art tower speaker that defines new standards for performance in its class. If you want the best, this is it.A house for high frequenciesThe 700 Series features the latest generation of our iconic Solid Body Tweeter-on-Top housing. Its new, more elongated form incorporates a longer tube-loading system to produce an even more free and open sound with high frequencies. The carefully decoupled housing is milled from a single solid block of aluminum to better resist resonance.Sharper detailCarbon Dome tweeters are purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminum double dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail.Truly amazing soundThanks to its composite construction, the Continuum™ cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. The result is a more open, neutral performance that delivers voices and instruments with precision and transparency.Clean and clearEvery three-way loudspeaker in the new 700 Series has a dedicated midrange cone using four key Bowers & Wilkins technologies: the Continuum cone, FST™, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers.A triumph of scienceDeveloped using advanced computer modelling techniques, the Aerofoil™ Profile bass cone has variable thickness, providing stiffness and rigidity where it’s needed most. The result: deep and dynamic bass.

A celebration of soundRoom-filling scale and authority come courtesy of two bass drivers, while improved terminals and enhanced drive unit positioning make 603 S3 the most sophisticated affordable tower speaker we've ever made.Layered, beautiful detailsThe new 603 S3 introduces our all-new Titanium Dome tweeter, which combines exceptional resolution and insight with smooth, refined high-frequency reproduction. The result? An accurate and immersive insight into your favorite music.Truly amazing sound603 S3 introduces our new and even more acoustically transparent tweeter grille mesh, first developed for our revered Signature models. Alongside the new Titanium Dome tweeter, the resolution and realism is exceptional.Precision and transparencyThanks to its composite construction, the Continuum cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. With 603 S3, experience a more open, neutral performance that delivers voices and instruments with precision and transparency.Upgraded speaker terminalsDerived from the speaker terminals recently introduced in our 700 Series range, the speaker terminals on the new 603 S3 feature an improved layout and a cleaner signal path between your amplifier and your loudspeakers.

A celebration of soundRoom-filling scale and authority come courtesy of two bass drivers, while improved terminals and enhanced drive unit positioning make 603 S3 the most sophisticated affordable tower speaker we've ever made.Layered, beautiful detailsThe new 603 S3 introduces our all-new Titanium Dome tweeter, which combines exceptional resolution and insight with smooth, refined high-frequency reproduction. The result? An accurate and immersive insight into your favorite music.Truly amazing sound603 S3 introduces our new and even more acoustically transparent tweeter grille mesh, first developed for our revered Signature models. Alongside the new Titanium Dome tweeter, the resolution and realism is exceptional.Precision and transparencyThanks to its composite construction, the Continuum cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. With 603 S3, experience a more open, neutral performance that delivers voices and instruments with precision and transparency.Upgraded speaker terminalsDerived from the speaker terminals recently introduced in our 700 Series range, the speaker terminals on the new 603 S3 feature an improved layout and a cleaner signal path between your amplifier and your loudspeakers.

A celebration of soundRoom-filling scale and authority come courtesy of two bass drivers, while improved terminals and enhanced drive unit positioning make 603 S3 the most sophisticated affordable tower speaker we've ever made.Layered, beautiful detailsThe new 603 S3 introduces our all-new Titanium Dome tweeter, which combines exceptional resolution and insight with smooth, refined high-frequency reproduction. The result? An accurate and immersive insight into your favorite music.Truly amazing sound603 S3 introduces our new and even more acoustically transparent tweeter grille mesh, first developed for our revered Signature models. Alongside the new Titanium Dome tweeter, the resolution and realism is exceptional.Precision and transparencyThanks to its composite construction, the Continuum cone avoids the abrupt transitions in behavior that can impair the performance of a conventional drive unit. With 603 S3, experience a more open, neutral performance that delivers voices and instruments with precision and transparency.Upgraded speaker terminalsDerived from the speaker terminals recently introduced in our 700 Series range, the speaker terminals on the new 603 S3 feature an improved layout and a cleaner signal path between your amplifier and your loudspeakers.

The Focal Aria Evo X N°4 is the largest 3-way floorstanding loudspeaker in the range, designed for authentic, full-range sound. It features an ‘M’-shaped aluminium/magnesium TAM tweeter, two 21 cm (8") bass drivers and a Flax-cone midrange driver.An additional bass-reflex system gives the bass more depth, and an aluminium alloy base completes the design. Its blend of classic and modern lets it sit naturally in any interior. Sold as a pair.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°4 is the largest 3-way floorstanding loudspeaker in the range, designed for authentic, full-range sound. It features an ‘M’-shaped aluminium/magnesium TAM tweeter, two 21 cm (8") bass drivers and a Flax-cone midrange driver.An additional bass-reflex system gives the bass more depth, and an aluminium alloy base completes the design. Its blend of classic and modern lets it sit naturally in any interior. Sold as a pair.TAM tweeter: silky-smooth trebleA Focal innovation made in France, the TAM tweeter offers a wide dispersion angle and clear sound without directionality. Its ‘M’-shaped aluminium/magnesium inverted dome delivers flawless harmonic balance and detailed treble with finesse and clarity.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°4 is the largest 3-way floorstanding loudspeaker in the range, designed for authentic, full-range sound. It features an ‘M’-shaped aluminium/magnesium TAM tweeter, two 21 cm (8") bass drivers and a Flax-cone midrange driver.An additional bass-reflex system gives the bass more depth, and an aluminium alloy base completes the design. Its blend of classic and modern lets it sit naturally in any interior. Sold as a pair.TAM tweeter: silky-smooth trebleA Focal innovation made in France, the TAM tweeter offers a wide dispersion angle and clear sound without directionality. Its ‘M’-shaped aluminium/magnesium inverted dome delivers flawless harmonic balance and detailed treble with finesse and clarity.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°3 is a 3-way floorstanding loudspeaker with an elegant design and small footprint. Compared with the Aria Evo X N°2 it has three bass drivers instead of two, for more, and more dynamic, bass that also makes a difference in a home cinema system.Flax cones made from French flax fibre deliver a very natural sound without colouration, with a rich midrange and powerful bass, while Focal’s TAM tweeter gives smooth, clear treble. A benchmark hi-fi loudspeaker in its class for music and film lovers. Sold as a pair.TAM tweeter: silky-smooth trebleA Focal innovation made in France, the TAM tweeter offers a wide dispersion angle and clear sound without directionality. Its ‘M’-shaped aluminium/magnesium inverted dome delivers flawless harmonic balance and detailed treble with finesse and clarity.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°3 is a 3-way floorstanding loudspeaker with an elegant design and small footprint. Compared with the Aria Evo X N°2 it has three bass drivers instead of two, for more, and more dynamic, bass that also makes a difference in a home cinema system.Flax cones made from French flax fibre deliver a very natural sound without colouration, with a rich midrange and powerful bass, while Focal’s TAM tweeter gives smooth, clear treble. A benchmark hi-fi loudspeaker in its class for music and film lovers. Sold as a pair.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°2 is a 3-way floorstanding loudspeaker for hi-fi listening at home. It reproduces pure, precise sound for a musical experience rich in emotion, whatever music you listen to.It combines an aluminium/magnesium TAM tweeter, Flax-cone drivers made from French flax fibre and a multi-vent system for deeper bass. Made in France, it suits rooms of 20 m² and up, with a recommended listening distance of about 3 metres. Sold as a pair.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°2 is a 3-way floorstanding loudspeaker for hi-fi listening at home. It reproduces pure, precise sound for a musical experience rich in emotion, whatever music you listen to.It combines an aluminium/magnesium TAM tweeter, Flax-cone drivers made from French flax fibre and a multi-vent system for deeper bass. Made in France, it suits rooms of 20 m² and up, with a recommended listening distance of about 3 metres. Sold as a pair.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°3 is a 3-way floorstanding loudspeaker with an elegant design and small footprint. Compared with the Aria Evo X N°2 it has three bass drivers instead of two, for more, and more dynamic, bass that also makes a difference in a home cinema system.Flax cones made from French flax fibre deliver a very natural sound without colouration, with a rich midrange and powerful bass, while Focal’s TAM tweeter gives smooth, clear treble. A benchmark hi-fi loudspeaker in its class for music and film lovers. Sold as a pair.TAM tweeter: silky-smooth trebleA Focal innovation made in France, the TAM tweeter offers a wide dispersion angle and clear sound without directionality. Its ‘M’-shaped aluminium/magnesium inverted dome delivers flawless harmonic balance and detailed treble with finesse and clarity.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

The Focal Aria Evo X N°2 is a 3-way floorstanding loudspeaker for hi-fi listening at home. It reproduces pure, precise sound for a musical experience rich in emotion, whatever music you listen to.It combines an aluminium/magnesium TAM tweeter, Flax-cone drivers made from French flax fibre and a multi-vent system for deeper bass. Made in France, it suits rooms of 20 m² and up, with a recommended listening distance of about 3 metres. Sold as a pair.TAM tweeter: silky-smooth trebleA Focal innovation made in France, the TAM tweeter offers a wide dispersion angle and clear sound without directionality. Its ‘M’-shaped aluminium/magnesium inverted dome delivers flawless harmonic balance and detailed treble with finesse and clarity.Clean midrange with the TMD surroundThe patented Focal TMD (Tuned Mass Damper) surround enhances the midrange and controls unwanted resonances where the cone meets the driver’s fixed frame. Timbres sound more uniform and the overall sound more neutral.Flax conePatented by Focal and made in its French workshops, the Flax cone is a sandwich of French flax fibres between two sheets of glass fibre. It is light for good dynamics, rigid to support the bass and well damped for a neutral, natural sound without colouration, with a rich midrange and clean bass.

s the flagship of the range, the AE120² is the largest model in the 100 series and a true 3-way design. This speaker offers a big sound from a slim-line enclosure, tastefully styled to blend into a wide range of domestic environments. Twin bass drive units underpin the room filling performance with a dedicated mid-range driver housed in its own enclosure, carefully designed to mitigate the harmful effects of rear wave reflections. Integrated within the perfectly matched Wide Dispersion Technology (WDT) waveguide, Acoustic Energy’s 25mm soft dome tweeter manages the high frequencies with controlled dispersion, high sensitivity and low distortion.The 3-way crossover is impedance compensated to avoid the resonance issues which would otherwise slow bass delivery and colour mid-range performance. Particular attention has also been paid to the phase and time alignment for optimum integration and soundstage. The result is a loudspeaker offering smooth, wide dispersion high frequencies with a clean mid-range and lightning fast bass response. The inert cabinet enclosure is constructed from 15mm HDF and like it’s smaller AE109² brother, supplied mass loaded to help dampen cabinet vibrations. The internal bracing system has been carefully tuned to reduce cabinet resonances and mid-range colouration, whilst the new AE120² benefits from a subtlety styled, discrete black plinth to aide stability, further improving dynamics and stereo focus.

s the flagship of the range, the AE120² is the largest model in the 100 series and a true 3-way design. This speaker offers a big sound from a slim-line enclosure, tastefully styled to blend into a wide range of domestic environments. Twin bass drive units underpin the room filling performance with a dedicated mid-range driver housed in its own enclosure, carefully designed to mitigate the harmful effects of rear wave reflections. Integrated within the perfectly matched Wide Dispersion Technology (WDT) waveguide, Acoustic Energy’s 25mm soft dome tweeter manages the high frequencies with controlled dispersion, high sensitivity and low distortion.The 3-way crossover is impedance compensated to avoid the resonance issues which would otherwise slow bass delivery and colour mid-range performance. Particular attention has also been paid to the phase and time alignment for optimum integration and soundstage. The result is a loudspeaker offering smooth, wide dispersion high frequencies with a clean mid-range and lightning fast bass response. The inert cabinet enclosure is constructed from 15mm HDF and like it’s smaller AE109² brother, supplied mass loaded to help dampen cabinet vibrations. The internal bracing system has been carefully tuned to reduce cabinet resonances and mid-range colouration, whilst the new AE120² benefits from a subtlety styled, discrete black plinth to aide stability, further improving dynamics and stereo focus.

The AE109² is designed to offer effortless, room filling performance from a slimline floor-standing loudspeaker in much the same way the world acclaimed original AE109 did 20 years ago. To do this, two 130mm paper drivers utilising an ultra-high force motor system are used in partnership with a 25mm soft dome tweeter. The 2.5- way crossover features a unique topology allowing integration and power handling previously un-achievable from this type of speaker. Particular attention has been paid to the phase and time alignment for the most cohesive performance possible. Like the AE100² stand-mount speaker, the driver and crossover are housed within a substantial 15mm HDF cabinet that takes styling cues from the award winning 500 Series. The result is an audio product with clean and uncluttered lines that can still deliver the thrilling and powerful presentation Acoustic Energy owners have come to expect. Black and walnut vinyl veneer finishes are available.

The AE109² is designed to offer effortless, room filling performance from a slimline floor-standing loudspeaker in much the same way the world acclaimed original AE109 did 20 years ago. To do this, two 130mm paper drivers utilising an ultra-high force motor system are used in partnership with a 25mm soft dome tweeter. The 2.5- way crossover features a unique topology allowing integration and power handling previously un-achievable from this type of speaker. Particular attention has been paid to the phase and time alignment for the most cohesive performance possible. Like the AE100² stand-mount speaker, the driver and crossover are housed within a substantial 15mm HDF cabinet that takes styling cues from the award winning 500 Series. The result is an audio product with clean and uncluttered lines that can still deliver the thrilling and powerful presentation Acoustic Energy owners have come to expect. Black and walnut vinyl veneer finishes are available.

Bigger Horn, Better SoundA new, larger 90° x 90° silicone composite hybrid Tractrix® horn provides incredibly efficient transfer of high-frequency waves into the listening area for crisper, clearer sound. The phase plug and compression molded silicone face ensure smooth frequency responseLinear Travel Suspension (LTS) Titanium Diaphragm TweeterThe exclusive 1" LTS minimizes distortion for enhanced, detailed performance. LTS tweeters are a hallmark of previous Reference Premiere Series, making it a core component of some of the best speakers in the world.Vented Tweeter DesignThe vented tweeter housing reduces standing waves that create unwanted harmonics, resulting in enhanced detail and clarity in high-frequency reproduction.All-New Cerametallic WoofersA signature feature on the Reference Premiere series speakers, the dual 8" Cerametallic™ woofers have been updated for absolutely flawless sound reproduction, minimum distortion, and maximum efficiency. The redesigned woofer will deliver the power, detail, and emotion you expect from a Klipsch Reference Premiere speaker.Tractrix PortUtilizing Tractrix geometry, the Reference Premiere port allows for the most efficient, fastest air transfer from the cabinet, which reduces port noise for punchier low frequencies and cleaner, more powerful bass.