. go to top icon

Metric Halo

All products - Metric Halo

Filters
34  Products

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

650 €
Interest Free Instalments 108,33€ / month
In Stock

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

650 €
12 Interest Free Instalments 54,17€ / month
In Stock

Sontec MES-432D9DThe classic mastering EQ - fully and accurately emulated.Almost 50 years after Sontec introduced the world's first parametric equalizer, we are proud to bring the Sontec to life in a digital version. A faithful recreation of Sontec's flagship mastering equalizer found in some of the world's most demanding studios.Originally designed by Burgess Macneal and George Massenburg, the MES has evolved into an almost mythical device. If you are unfamiliar with the MES-432, this article will add a little flavor: ITI AUDIO MES-432C/9 We are proud to have been developing this wonderful equalizer with Make Believe Studios, Burgess Macneal and his team over the past year. Burgess has made his personal version of the MES 432 available to us.In essence, the MES-432 is an extremely flawless parametric equalizer, but the analog characteristics of the EQ are complex and cannot be directly represented with a standard digital EQ implementation.In order to capture the behavior of the MES 432 true to the original, we have developed the "MH State Space Model Extraction" for the modeling process.With this we capture the complex interaction and interaction of the analog filters even at a simple sample rate like 44.1 kHz, even if the chosen frequency band is above the Nyquist frequency. And that without oversampling and the associated latencies!The Sontec MES-432D9D will also be available separately for AU, AAX and VST.

355 €
12 Interest Free Instalments 29,58€ / month
Upon Order

MH EdgeCard - SPDIF/MIDI

100 €
12 Interest Free Instalments 8,33€ / month
Upon Order

MH EdgeCard - MADI (1x Copper/1x Optical) (128 Audio Channels I/O)

450 €
12 Interest Free Instalments 37,50€ / month
Upon Order

MH EdgeCard - MADI (4x Copper) (256 Audio Channels I/O)

450 €
12 Interest Free Instalments 37,50€ / month
Upon Order

MH EdgeCard - DB-25 AES (8 Audio Channels I/O)

300 €
12 Interest Free Instalments 25,00€ / month
Upon Order

MH EdgeCard - 4x ADAT (32 Audio Channels I/O)

240 €
12 Interest Free Instalments 20,00€ / month
Upon Order

  MH Edge Board - 2xSPDIF 2xADAT (20 Audio Channels I/O)

240 €
12 Interest Free Instalments 20,00€ / month
Upon Order

MH EdgeCard- 1xSPDIF 2xADAT (18 Audio Channels I/O)

215 €
12 Interest Free Instalments 17,92€ / month
Upon Order

MH EdgeCard for 3d Interfaces - AES/SPDIF

120 €
12 Interest Free Instalments 10,00€ / month
In Stock

Customers who bought this product also bought the following products:MH EdgeCard - 1xSPDIF 2xADATMH EdgeCard- AES/SPDIFMobile I/O 2882 or ULN-2 Rack Ear Kit3d ADAT Opto BoardMH EdgeCard - SPDIF/MIDILIO-8 8 Channel (1-8) ULN-R Preamp KitMH CharacterMH TransientControlMH ChannelStrip 3MH ChannelStrip 3 for GarageBand

599 €
12 Interest Free Instalments 49,92€ / month
Upon Order

mkIV Analog Board Upgrade Kit for ULN-8/LIO-8 3dThis kit includes a new mkIV Analog Board and mkIV Relay Mute board + updated dome tags for your existing 3d (MHLink) based ULN-8 or LIO-8.Please note: Your ULN-8/LIO-8 must have a 3d card in order to utilize this upgrade. Please do not order this if your unit is FireWire based. This upgrade is not applicable to the 2882 or the ULN-2.

899 €
12 Interest Free Instalments 74,92€ / month
Upon Order

The best sound card ever made now in the latest generation mkIV with new AD and DA converters and 18 samples latency! USB-C Audio Interface 192 kHz converter 8 Ultra-low noise preamps MH-Link DSP license EdgeBus slot ANOC LED meter Phantom power +48 V Format: 19", 1U Dimensions (W x H x D): 423 x 44 x 330 mm Weight: 2.7 kg Includes rack ears and external power supply Connections: 8 x Microphone input Sub-D25 2 x Hi-Z input 6.3 mm jack 8 x line input Sub-D25 8 x Line Output Sub-D25 8 x Send Sub-D25 2 x Monitor output 6.3 mm jack AES / EBU input and output Sub-D25 MIDI input and output MH-Link SMPTE input and output Word Clock BNC input and output Stereo headphone output 6.3 mm jack USB-C The 3d Card Upgrade is a user-installable hardware and software combination that completely refreshes your Metric Halo devices for the next leg of the digital revolution. It replaces all the digital & computer interfacing on your hardware with up-to-date, cutting-edge implementations. The 3d Card Upgrade includes: MH Link — Exceptionally low-latency, Ultra-high-bandwidth audio, clock and data connections over Gigabit Ethernet. MH EdgeBus — An Ultra-high-bandwidth programmable and pluggable audio expansion slot. MH EdgeBus allows you to effortlessly extend your system to be exactly the interface you need at any given moment. MH Console – A modern, 64-bit application to control your entire system with a simple, lightning fast and flexible routing model and a stunning new visual design. MH Mixer – 128 input x 64 bus multi-box unified zero-latency mixer. MH MonitorControl – Integrated surround capable monitor controller with system processing capability. Includes Analog Domain level control on ULN-8/LIO-8 hardware. MH Record – 128 input ultra-reliable multitrack recorder with deep hardware integration. MH DSP Engine — Enhanced processing power and massive memory in the hardware. All 3d hardware includes the +DSP license providing over a hundred plug-ins and the unique Metric Halo Graph environment. MH Link Audio — Direct Ethernet CoreAudio driver (with support for up to 128 channels of I/O @ 192k). USB Audio — USB-C Class Audio Interface.   Simply the best - of everything! Building upon the experience gained with the Mobile I/O 2882 2D and ULN-2 3D we set out to design an integrated product to literally provide the best performance in each of its component sections while still providing all of the benefits of tight integration in a single field-capable package. The ULN-8 3D is the result of that development program.The ULN-8 incorporates the latest of Metric Halo Audio technologies    

2.895 €
12 Interest Free Instalments 241,25€ / month
Upon Order

The best sound card ever made now in the latest generation mkIV with new AD and DA converters and 18 samples latency! USB-C Audio Interface 192 kHz converter MH-Link DSP license EdgeBus slot ANOC LED meter Phantom power +48 V Format: 19", 1U Dimensions (W x H x D): 423 x 44 x 330 mm Weight: 2.7 kg Includes rack ears and external power supply Connections: 8 x line input Sub-D25 8 x Line Output Sub-D25 8 x Send Sub-D25 2 x Monitor output 6.3 mm jack AES / EBU input and output Sub-D25 MIDI input and output MH-Link SMPTE input and output Word Clock BNC input and output Stereo headphone output 6.3 mm jack USB-C The 3d Card Upgrade is a user-installable hardware and software combination that completely refreshes your Metric Halo devices for the next leg of the digital revolution. It replaces all the digital & computer interfacing on your hardware with up-to-date, cutting-edge implementations. The 3d Card Upgrade includes: MH Link — Exceptionally low-latency, Ultra-high-bandwidth audio, clock and data connections over Gigabit Ethernet. MH EdgeBus — An Ultra-high-bandwidth programmable and pluggable audio expansion slot. MH EdgeBus allows you to effortlessly extend your system to be exactly the interface you need at any given moment. MH Console – A modern, 64-bit application to control your entire system with a simple, lightning fast and flexible routing model and a stunning new visual design. MH Mixer – 128 input x 64 bus multi-box unified zero-latency mixer. MH MonitorControl – Integrated surround capable monitor controller with system processing capability. Includes Analog Domain level control on ULN-8/LIO-8 hardware. MH Record – 128 input ultra-reliable multitrack recorder with deep hardware integration. MH DSP Engine — Enhanced processing power and massive memory in the hardware. All 3d hardware includes the +DSP license providing over a hundred plug-ins and the unique Metric Halo Graph environment. MH Link Audio — Direct Ethernet CoreAudio driver (with support for up to 128 channels of I/O @ 192k). USB Audio — USB-C Class Audio Interface.   Simply the best - of everything! Building upon the experience gained with the Mobile I/O 2882 2D and ULN-2 3D we set out to design an integrated product to literally provide the best performance in each of its component sections while still providing all of the benefits of tight integration in a single field-capable package. The LIO-8 3D is the result of that development program.The LIO-8 3D  incorporates the latest of Metric Halo Audio technologies    

2.495 €
24 Interest Free Instalments 103,96€ / month
In Stock

The best sound card ever made now in the latest generation mkIV with new AD and DA converters and 18 samples latency! USB-C Audio Interface 192 kHz converter 8 Ultra-low noise preamps MH-Link DSP license EdgeBus slot ANOC LED meter Phantom power +48 V Format: 19", 1U Dimensions (W x H x D): 423 x 44 x 330 mm Weight: 2.7 kg Includes rack ears and external power supply Connections: 8 x Microphone input Sub-D25 2 x Hi-Z input 6.3 mm jack 8 x line input Sub-D25 8 x Line Output Sub-D25 8 x Send Sub-D25 2 x Monitor output 6.3 mm jack AES / EBU input and output Sub-D25 MIDI input and output MH-Link SMPTE input and output Word Clock BNC input and output Stereo headphone output 6.3 mm jack USB-C The 3d Card Upgrade is a user-installable hardware and software combination that completely refreshes your Metric Halo devices for the next leg of the digital revolution. It replaces all the digital & computer interfacing on your hardware with up-to-date, cutting-edge implementations. The 3d Card Upgrade includes: MH Link — Exceptionally low-latency, Ultra-high-bandwidth audio, clock and data connections over Gigabit Ethernet. MH EdgeBus — An Ultra-high-bandwidth programmable and pluggable audio expansion slot. MH EdgeBus allows you to effortlessly extend your system to be exactly the interface you need at any given moment. MH Console – A modern, 64-bit application to control your entire system with a simple, lightning fast and flexible routing model and a stunning new visual design. MH Mixer – 128 input x 64 bus multi-box unified zero-latency mixer. MH MonitorControl – Integrated surround capable monitor controller with system processing capability. Includes Analog Domain level control on ULN-8/LIO-8 hardware. MH Record – 128 input ultra-reliable multitrack recorder with deep hardware integration. MH DSP Engine — Enhanced processing power and massive memory in the hardware. All 3d hardware includes the +DSP license providing over a hundred plug-ins and the unique Metric Halo Graph environment. MH Link Audio — Direct Ethernet CoreAudio driver (with support for up to 128 channels of I/O @ 192k). USB Audio — USB-C Class Audio Interface.   Simply the best - of everything! Building upon the experience gained with the Mobile I/O 2882 2D and ULN-2 3D we set out to design an integrated product to literally provide the best performance in each of its component sections while still providing all of the benefits of tight integration in a single field-capable package. The ULN-8 3D is the result of that development program.The ULN-8 incorporates the latest of Metric Halo Audio technologies    

3.195 €
12 Interest Free Instalments 266,25€ / month
Upon Order

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

580 €
Interest Free Instalments 96,67€ / month
Upon Order

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

580 €
12 Interest Free Instalments 48,33€ / month
In Stock

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

580 €
12 Interest Free Instalments 48,33€ / month
Upon Order

These Original FACTORY equipment World Ready power supplies come complete with an interchangeable IEC to 'your local plug configuration power (mains) cord'. Features:Input 90 ~ 250V ACFrequency 50-60HzOutput 24V DCMax. Load 48W

65 €
12 Interest Free Instalments 5,42€ / month
Upon Order

These Original FACTORY equipment World Ready power supplies come complete with an interchangeable IEC to 'your local plug configuration power (mains) cord and a locking 4 pin XLR connector for your ULN-2, ULN-8 or LIO-8'''. Specifications:Input 90 ~ 250V ACFrequency 50-60HzOutput 24V DCMax. Load 48WLocking 4 pin XLR connector for secure power input to your ULN-2, ULN-8 or LIO-8

85 €
12 Interest Free Instalments 7,08€ / month
In Stock

Multiband Expander is a plug-in that allows you to manage, suppress and control noise in your tracks in a frequency-sensitive way. The 3-band phase-coherent crossover network directs the audio to three independent expanders that you configure to smoothly suppress noise below the threshold you specify.The expanders can also be configured to change the feel of rhythmic patterns by suppressing elements that are played more softly – all in a frequency-sensitive way.Multiband Expander features SpectraFoo spectral analysis to allow you to zero-in on crossover points and thresholds quickly and with confidence. The Multiband feature of the expander is extremely useful for controlling noise and hum in guitar tracks, as you can attack the noise more aggressively than the desired signal.Features:Low, mid, & high band expanders with independent controlsComprehensive master-slave linking between bandsDynamic Transfer function to show the overall responseSpectraFoo spectrum analysis built-inScalable gain reduction metersAdjustable UI sizeMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

TransientControl is a plug-in that allows you to modify dynamics in ways that just aren’t possible with traditional compressors. You can directly change the transient (“attack”) and sustain of your audio; this allows you to make your tracks more punchy, or smooth them out so they sit in a mix.TransientControl analyzes your audio and distinguishes between the onset of sounds (the attack), the sustain of sounds and the decay of sounds (the release). With three gain controls you can dial in the relative level of these three elements of the sound.TransientControl can enhance the attacks of finger-picked guitar, or mute the attack of strumming. Use it to make an instrument sit in the mix or pop out. Control the snap of a snare without affecting the ring. Even use it to change the feel of a percussion pattern.TransientControl does its magic in real-time with no latency, so you can use it for mixing and live.Features:Independent Control over Attack and Sustain of your tracksDetailed display of gain applied over timeAdvanced controls to modify attack and release detectorsAdjustable UI - simple, detailed and advancedAuto Sensitivity Mode for processing at any signal levelMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

Production Bundle is a suite of signal processing plug-ins that let you stop recording and start making records. With all the critical tools you need to shape, tame, manipulate, and master your tracks, it is the essential audio engineering toolset that no one should be without.The Production Bundle includes 8 fantastic sounding plugins that will help you bring your work to new levels:MH ChannelStripPut a Million Dollar Console in your DAWMH CharacterA bucket full of old school goodness.....MH HaloVerbCreate your perfect spaceMH Dirty DelayVisceral, Gritty, Musical Feedback DelayMH Precision De-EsserA Surgical Strike On Stubborn SibilanceMH Multiband Dynamics Sometimes the best EQ is a compressorMH Multiband ExpanderExpand your horizonsMH TransientControlSophisticated Transient Modifier & WaveshaperSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms

699 €
12 Interest Free Instalments 58,25€ / month
Upon Order

HaloVerb is a plug-in that allows you to add ambience and depth to your recordings. Based on the original HaloVerb hardware implementation for 2d-Expanded Metric Halo interfaces, the HaloVerb plugin expands on the great algorithmic sound to give you more flexibilty and control. Use the reverb impulse to see the reverberant field as you make adjustments, or hide the graphics and let your ears be your guide. Add subtle ambience or generate the sound of a vintage echo chamber - the extensive presets and easy to use UI let you dial in the sound you want quickly. Features:Low and High frequency pre-filters with graphic displayReverb impulse display to show the shape of the reverbReverb times of up to 7 secondsStereo width controlAdjustable UI sizeSupports AAX DSP – one of the only AAX|DSP reverbs availableMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

MH Dirty Delay is a fantastic-sounding feedback delay processor with integrated Character and Filters in the delay path.  Use it to create awesome vintage echo and tape-delay style sounds as well as create lush and subtle spaces in a mix.Not just a musical feedback delay, MH Dirty Delay is something special. With integrated Filters and Character in the feedback path, you can make it clean or dirty, vintage or futuristic, subtle or nasty.With dual delay lines, crossfeed, feedback and distortion control, Dirty Delay is capable of creating extraordinarily rich and complex textures and patterns from your audio. Dirty Delay adds texture and movement without the veiling and darkening of the sound that is often associated with feedback delays. Dirty Delay is equally at home in production and performance.Features:Mono and Stereo delay lines of up to 5 seconds eachDelay Times can be set manually in milliseconds, orDelay Times can be set via note values based on TempoTempo can be slaved to host, set manually or tapped inEach delay line has feedback with phase invertEach delay line has and crossfeed with phase invertThe output of each delay line can be offset in timeEach delay line has an independent wet/dry mix and gain2-band fully-parametric filter for shaping the delayed soundMH Character in the delay path for texturizing and saturating the delayed soundMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX|Native (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX|Native (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

Precision DeEsser is a plug-in that allows you to manipulate your tracks and remove excessive high frequency content. It combines the high precision filter technology and dynamics processing of ChannelStrip with the metering and analysis of SpectraFoo to allow you zero in on offending frequencies and correct them quickly and efficiently.Precision DeEsser features comprehensive listening controls to allow you to hear to hear exactly what is (or isn't) being removed; you may choose five different points in the processing chain to monitor. As with all Metric Halo plug-ins, parameters are fully automatable to give you full control of the processing during mixdown.The Precision DeEsser is an essential tool for vocal tracks, but can also be used for sound design and other audio processing.Features:High precision linear-phase filter block with: Center, Bandwidth and Sharpness controlsEss-Compressor with: Threshold, Ratio, Attack and Release controlsComprehensive Listening ControlSpectraFoo spectrum analysis, with selectable displaysScalable gain reduction meterAdjustable UI sizeMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

Multiband Dynamics is a plug-in that allows you to add clarity, warmth and punch to your mix. It shapes timbral quality of your audio by running it through a three-band crossover, and providing independent compression in each frequency range before summing the result through a limiter.Without compression, you can broadly shape the timbre of your tracks, and if you need dynamic range control or dynamic EQ, simply enable the compressor for the band.Multiband Dynamics is an essential tool for mixing and mastering, but can also be used for sound design and other audio processing.Features:Low, mid, & high band compressors with selectable auto gainComprehensive master-slave linking between bandsPost-compressor limiter for level maximizationDynamic Transfer function to show the overall responseSpectraFoo™ spectrum analysis built-inScalable gain reduction metersAdjustable UI sizeMH Preset Manager - Provides cross-platform presetsSpecifications:System RequirementsMac: Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Windows: Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10 & 11) host. 32 & 64 bit.Licensing RequirementsiLok.com account.iLok dongle is optional — you may install the license on iLok for portability.Only one license required – works on all supported platforms.

179 €
36 Instalments 6,18€ / month
Upon Order

We started with ChannelStrip 2; a plug-in that's been used on countless hits and soundtracks with a fourteen year pedigree. Then we made it better, incorporating user feedback. Now we're proud to release ChannelStrip 3 for Pro Tools 10.Notable features include:New look for the user interfaceResizable - small, medium and large sizes to fit different screen resolutions, make CS 3 easier to useAdded "MIO Comp" character from our hardware MIOStripNow includes a limiter, making ChannelStrip 3 a single plug-in master bus solutionSpectraFoo™ spectrum analysis on the EQ and sidechain graphsSidechain listens for the gate and compressorAll your existing ChannelStrip 2 presets open seamlessly for session compatibilityNow iLok compatibleChannelStrip3 runs under the new AAX plug-in format in Pro Tools 10, in either Native or DSP mode. A single license enables both usages – no more separate licenses for RTAS and TDM.

179 €
12 Interest Free Instalments 14,92€ / month
Upon Order

SpectraFoo provides all of the tools today's digital projects demand. Whether you are a live sound engineer or a studio mixer, you need the power that Foo provides. Including standards-based level metering, high-speed, high-resolution spectral analysis, the unique Phase Torch, correlation metering, triggerable waveform display, power balancing and a variety of power, envelope and spectral histories and phase analysis on any number of input or output channels, the SpectraFoo range is absolutely essential for broadcast production and critical mixing & mastering.SpectraFoo Complete provides the engineer with the complete toolset in the Standard version, plus sample code metering tools, a 12 band signal generator, a recording, playback, looping & static analysis system, and a complete transfer function measurement system.         FEATURESLissajous phase scopes (X-Y, vectorscope and stereo field display modes)Full featured audio frequency oscilloscopesPower balance metersFull featured level meters with physical unit calibrationFull featured audio spectrum analyzersSpectragram spectral history metersCorrelation metersCorrelation history metersPhase Torch frequency-sensitive phase metersEnvelope history metersBand Limited history meters SpectraFoo Complete FeatureSpectraFoo has been designed to provide all of the tools you need for a powerful suite of digital meters, with all of the resolution of hardware meters at a fraction of the price. With more than 15 individual metering tools, SpectraFoo gives you all of the information you need to analyze and prepare your audio, for production, performance, mastering, or broadcast.SpectraFoo Complete was created for live sound engineers and mixing engineers. Including tools to measure your acoustic environment or verify the behavior of your external digital devices, SpectraFoo Complete provides the following additions to SpectraFoo:Full featured world-class signal generator:SpectraFoo Complete has a high-resolution multi-tone, multi-noise, sweepable, burstable signal generator. The generator is capable of running in real-time, or alternatively striping signal into a capture or into an AIFF or SDII file. The interface to the signal generator is numerical, which makes it very precise,• Provides high resolution 24-bit distortion free signal generation • Up to 9 simultaneous sine sweeps• Pink and White noise generation • Burst Generation• FFT synchronized sine generation• Direct generation to audio I/O, captures and filesTransfer Function Measurement System: For live sound, equipment testing, or any application where you need to analyze the characteristics of acoustical and electrical audio systems, SpectraFoo Complete's built in transfer function display shows you the relative power and phase response between the left and right channels. Using Metric Halo's Music Based Measurementô, the source signal is the input to some audio processing arrangement and the response signal is the measured output of the system, making music your “test tone”. SpectraFoo uses the source signal as a point of reference and the transfer function display shows the differences in amplitude and phase between the source and response as function of frequency.This allows you to measure the properties of audio processing systems, including systems that contain acoustic elements. You can determine the amplitude and phase response of an equalizer in the presence of musical signal as easily as measuring the sound coloration of an acoustic space.SpectraFoo provides a Delay Detection Feature to properly measure the power and phase of the response signal relative to the source signal, as the source signal must be delayed to time-align it with the response signal. The delay finder records a segment of both signals and computes the correlation of the signals with each other. By moving the cursor to the largest correlation of the two signals, you set the system delay and compensate for the measurement delay, time-aligning the two signals.   Capture and Static Analysis system: Allows you to record directly into SpectraFoo's RAM based capture system• Provides loop playback• Allows you to open sound files for detailed analysisRecord selections of audio into the computer’s RAM and perform incredibly detailed non-realtime analysis. All captures are referenced to the timecode of the source material. Captures may be initiated manually or can be triggered automatically, either with a level-based trigger or a time-based trigger. All recording is controlled and initiated by three basic capture modes that you may use: When Data Slicing is enabled, the realtime instruments display the data which lies underneath the current position of the cursor. If you drag the cursor around in the overview window, the realtime instruments will continuously update to reflect the current cursor position. If you replay the capture, the realtime rack will continuously update in sync with the playback. Bit Range Meter: Displays the range of sample codes exercised in the assigned channel of each time slice. It shows the activity in each bit of the sample word and shows you which bits are being exercised.Bit Scope: Displays a list of the codes of all of the samples in the time slice. This allows you to see low-level activity in the signal, stuck bits, DC offsets and the like.Each time the display is updated, all of the sample in the time slice are shown. The number of samples in the time slice are determined by the I/O hardware’s buffer size. The samples are displayed starting with the first sample in the time-slice in the upper left hand corner of the instrument. Each successive sample is place under the previous one until the bottom of the column is reached. The next sample is placed at the top of the next column.Bit Matrix Meter (Instantaneous Snapshot):Pinpoint problems with processing algorithms in your data stream, and test and design DSP algorithms with this comprehensive readout.The Bit Matrix Meter is designed to work with 16-bit delivery media and only utilizes the top 16 bits of the samples in the signal. The meter takes the 16-bit samples and divides them into two groups: the most significant byte (MSB) which is the top 8 bits, and the least significant byte (LSB) which is the bottom 8 bits. For each sample these groups are then converted to horizontal (MSB) and vertical (LSB) offsets into a 256x256 pixel matrix.Bit Matrix Meter (Accumulation Snapshot): Switch the Bit Matrix Meter into Accumulation Mode and display the aggregate utilization of the code space. The accumulation mode does not erase the bit matrix with each new time-slice and this accumulates a picture of all of the sample code that have been exercised by the signal. This snapshot shows us that while most of the codespace is exercised by the signal, the top 3dB or so is pretty sparse. This indicates that we could compress this signal with a pretty hard ratio and a 3dB threshold and introduce very little distortion.

549 €
12 Interest Free Instalments 45,75€ / month
Upon Order

While the 2d Card includes the basic processing bundle with every card, you can add a +DSP license to your box at any time. Adding a +DSP license will allow you to take advantage of the greatly increased processing power of the new DSP and the ease of inserting Plug-ins directly into mixer channels. If your unit is already a +DSP unit, then you already have a +DSP license. But if your unit doesn't already include +DSP, you can add a license without any additional physical changes to your hardware.

355 €
12 Interest Free Instalments 29,58€ / month
Upon Order

Το Spectra Foo είναι το καλύτερο analyzer που υπάρχει και παρέχει όλα τα εργαλεία που απαιτούν τα σημερινά ψηφιακά project. Τόσο ένας μηχανικός ήχου για live, όσο και ένας ηχολήπτης μίξης στούντιο χρειάζεται τη δύναμη που παρέχει το Spectra Foo.Περιλαμβάνοντας αναλυτή συχνοτήτων, level metering, το μοναδικό Phase Torch, μέτρηση συχνότητας ως προς την φάση, waveform history, triggerable waveform display, ιστορικό φασματικό και ισορροπίας καναλιών , ανάλυση φάσης σε οποιοδήποτε αριθμό καναλιών εισόδου ή εξόδου, το Spectra Foo είναι απαραίτητο για ραδιοφωνικές παραγωγές, μίξεις ή mastering.Το Spectra Foo Complete παρέχει επιπροσθέτως code metering, έναν 12band generator σήματος ,ένα playback καταγραφής, ένα looping και static σύστημα ανάλυσης και ένα σύστημα transfer function To Spectra Foo είναι μια συλλογή από βραβευμένα μετρητικά εργαλεία υψηλής ανάλυσης τόσο σε αυτόνομα όσο και σε DAW plug-in συστήματα.

299 €
12 Interest Free Instalments 24,92€ / month
Upon Order

This Kit adds channels 1-4 of ULN-R preamps and an 8 channel DB-25 Input connector board to an existing LIO-8.These are the same preamps as used in the ULN-8. Specifications: Mic Pre Input + ADCInput Impedance   3.3 kΩDynamic Range (-60 dB, flat 0-22.05 kHz, typ)   115 dBDynamic Range (-60 dB, A-weighted, typ)   118 dBNoise Floor (flat 0-22.05 kHz, typ)   115 dBNoise Floor (A-weighted, typ)   117.9 dBGain Range   -22 dB to +91.5 dBGain Precision   ±0.05 dBGain Step   0.5 dBTHD D/A/A/D loop @ -12 dBFS   0.0007 %THD D/A/A/D loop @ -12 dBFS +12 dB Gain   0.0015 %THD D/A/A/D loop @ -0 dBFS   0.0023 %Crosstalk @ 1kHz   -110dBIMD 1k component (19 kHz/20kHz @ +8dBu)   -104 dBuEIN @ 60 dB Gain (150Ω Source Impedance)   -130.50 dBuEIN @ 60 dB Gain (0Ω Source Impedance)   -133.25 dBuAnalog Send Calibration (ADC = 0 dBFS)   +21.5 dBuPhantom Power (Switchable Per Channel)   +48 VoltsMic Pre + ADC Frequency Response+0/-0.1dB @ fs = 44100 Hz   8.9 Hz - 20.5 kHz+0/-1.0dB @ fs = 44100 Hz   2.9 Hz - 21.0 kHz+0/-0.1dB @ fs = 96000 Hz   8.9 Hz - 43.9 kHz+0/-1.0dB @ fs = 96000 Hz   2.9 Hz - 45.4 kHz+0/-0.1dB @ fs = 192000 Hz   8.9 Hz - 42.1 kHz+0/-1.0dB @ fs = 192000 Hz   2.9 Hz - 64.7 kHz5° low-end in-channel phase deviation point   20.0 HzInterchannel phase 0 Hz - 20 kHz   < ±0.05°Crosstalk from SMPTE Input   < -142 dB 

449 €
12 Interest Free Instalments 37,42€ / month
Upon Order

This Kit adds channels 5-8 of ULN-R preamps to a LIO-8 that has an 8 channel DB-25 Input connector board already installedThese are the same preamps as used in the ULN-8. Specifications: Mic Pre Input + ADCInput Impedance   3.3 kΩDynamic Range (-60 dB, flat 0-22.05 kHz, typ)   115 dBDynamic Range (-60 dB, A-weighted, typ)   118 dBNoise Floor (flat 0-22.05 kHz, typ)   115 dBNoise Floor (A-weighted, typ)   117.9 dBGain Range   -22 dB to +91.5 dBGain Precision   ±0.05 dBGain Step   0.5 dBTHD D/A/A/D loop @ -12 dBFS   0.0007 %THD D/A/A/D loop @ -12 dBFS +12 dB Gain   0.0015 %THD D/A/A/D loop @ -0 dBFS   0.0023 %Crosstalk @ 1kHz   -110dBIMD 1k component (19 kHz/20kHz @ +8dBu)   -104 dBuEIN @ 60 dB Gain (150Ω Source Impedance)   -130.50 dBuEIN @ 60 dB Gain (0Ω Source Impedance)   -133.25 dBuAnalog Send Calibration (ADC = 0 dBFS)   +21.5 dBuPhantom Power (Switchable Per Channel)   +48 VoltsMic Pre + ADC Frequency Response+0/-0.1dB @ fs = 44100 Hz   8.9 Hz - 20.5 kHz+0/-1.0dB @ fs = 44100 Hz   2.9 Hz - 21.0 kHz+0/-0.1dB @ fs = 96000 Hz   8.9 Hz - 43.9 kHz+0/-1.0dB @ fs = 96000 Hz   2.9 Hz - 45.4 kHz+0/-0.1dB @ fs = 192000 Hz   8.9 Hz - 42.1 kHz+0/-1.0dB @ fs = 192000 Hz   2.9 Hz - 64.7 kHz5° low-end in-channel phase deviation point   20.0 HzInterchannel phase 0 Hz - 20 kHz   < ±0.05°Crosstalk from SMPTE Input   < -142 dB 

399 €
12 Interest Free Instalments 33,25€ / month
Upon Order