Lumene

The Lumene Coliseum Silent Extra Bright UST is a motorised, tensioned projection screen designed exclusively for ultra-short-throw projectors in a living room or everyday living space. Its grey CLR (Ceiling Light Rejection) surface limits the impact of room lighting, especially from the ceiling, so the image stays readable when the room cannot be fully darkened. It is available in several sizes, in 16:9 format.The 4K-compatible surface rejects more than 88% of ambient light, reproduces 99% of colours and has a gain of 0.5 with a 140° viewing angle. The CLR structure exploits the geometry of UST projectors, favouring light coming from below while rejecting room light. Tab tensioning keeps the surface flat.The new 20 W DC motor runs at under 50 dB, is rated for more than 20,000 cycles and moves smoothly using an S-curve. Travel limits are set electronically with precision.Control is via RS232, RS485, dry contacts, 433 MHz RF, infrared and a 12 V trigger, with a fine-adjust remote and manual Up/Stop/Down buttons. The white aluminium housing mounts on a wall, a ceiling or suspended.

The Lumene Coliseum Silent Extra Bright LT is a motorised, tab-tensioned 16:9 projection screen designed exclusively for long-throw projectors. This new generation of the Coliseum range targets living spaces where ambient light cannot always be controlled.Its matte grey ALR Long Throw surface rejects more than 85% of ambient light, preserving contrast, black depth and colour intensity. With a gain of 1.2, 99% colour reproduction and a 140° viewing angle, it delivers a bright, faithful picture at large sizes. The side tensioning system keeps the surface flat so image geometry stays stable and 4K resolution is rendered properly.The new 20 W DC motor runs at under 50 dB, is rated for more than 20,000 cycles, accepts 110–240 V without an external transformer and features electromagnetic shielding. S-curve motion control provides smooth acceleration and deceleration, while electronic limits allow precise positioning.Control options include a remote with fine position adjustment, built-in infrared and 433 MHz radio frequency, manual Up/Stop/Down buttons, plus RS232, RS485, dry contact and a 12 V trigger for home automation. The sealed, grounded white lacquered aluminium case mounts on a wall, a ceiling or suspended. Available in six sizes, all 16:9.

Universal armrest (can be used on the right or on the left)Structure : wood and plywood, steelMaterial : buffalo leatherDensity of back and seat: 19 kg/m3 and 28 kg/m3Density of armrests: 24 kg/m3Type of foam: cut foam

The Lumene Trigger 12 V is a wireless control system for projectors and motorised projection screens fitted with a 3.5 mm mini-jack trigger socket. When the projector switches on the screen lowers automatically, and when it switches off the screen retracts.The transmitter connects to the projector and the receiver to the screen. No cable is needed between them, so installation in any compatible home cinema is simple and tidy.Automatic operationThe Lumene Trigger syncs the screen with the projector. As soon as the projector turns on, the motorised screen comes down, and when it turns off, the screen rolls back up. There is no separate remote to reach for and nothing else to do, just one press on the projector.No cables neededThe transmitter attaches to the projector and the receiver to the screen, and they talk wirelessly at 868 MHz with a 10 m range. You avoid running long trigger cables through walls and false ceilings, which makes it ideal for existing installations as well.Wide compatibilityIt works with any projector and motorised screen that has a 3.5 mm mini-jack trigger socket. An adapter for IR output is included, and power comes from a 3 V coin cell. It suits every Lumene screen listed as compatible with the Lumene Trigger.

The Lumene Movie Palace Fresnel Ultra Slim UST is a 16:9 fixed-frame projection screen designed exclusively for ultra short throw (UST) projectors. It mounts on the wall above the TV cabinet and, at just 4 cm deep, blends discreetly into the living room.Its Fresnel technology uses advanced photolithography with seven layers of holographic microstructures that precisely control the angles and directions of light. The ALR surface absorbs 95% of ambient light from three sides, eliminating hotspots and shadows, and according to the manufacturer is up to 100 times brighter than a conventional screen.With a gain of 1, a 135° viewing angle and 98% colour fidelity, it produces vivid images with deep blacks. A black light-blocking back and black borders strengthen contrast and prevent distracting reflections.The black frame, only 1.5 cm wide, maintains perfect, lasting tension through a multi-point fixing system for a completely flat surface, while clip fixing makes installation quick and simple.

The Lumene Eden Extra Bright UST is a motorised, tensioned projection screen designed exclusively for ultra-short-throw (UST) projectors. Compact and complete, its ambient light rejection (ALR) technology lets you enjoy your projector at any time of day without plunging the room into darkness. It is available in several sizes in the 16:9 format.The high-quality surface offers a wide field of view and accurate colour, with a 175° viewing angle and a gain of 0.5. The black blackout backing allows placement in front of a window without light leakage, while black borders significantly improve perceived contrast.The side tensioning system allows fine adjustment and ensures a perfectly flat surface, with no waves or image distortion. The tensioned surface removes the risk of it slackening over time, keeping picture quality consistent.The slim black-lacquered steel housing fits into tight spaces. Clip mounting simplifies installation on a wall or on the back of a piece of furniture, and the screen can also be suspended. With its aluminium arms, the screen disappears completely into the housing when not in use.

The Lumene Eden Extra Bright LT is a motorised projection screen that rises from the bottom up, designed specifically for long-throw projectors. Its ALR (Ambient Light Rejection) surface rejects more than 85% of ambient light, including light from the ceiling and sides, for a bright, high-contrast picture even in a lit room.The surface has a gain of 0.6, a 140° viewing angle and 99% colour reproduction with no hot spot, plus anti-yellowing, anti-dust and anti-wrinkle treatments. Lateral cable tensioning keeps it flat, while a black light-blocking back and black borders make the image stand out.The slim black lacquered-steel case sits on the floor on four adjustable feet that tilt it forwards or backwards, or fixes to a wall or the back of a cabinet. Two built-in handles make it easy to move, and the aluminium scissor mechanism has been tested over thousands of cycles.Ideal for living rooms, bedrooms, media rooms or meeting rooms. Recommended minimum projector brightness is 2,800 ISO lumens. The ALR LT surface is not compatible with RGB triple-laser projectors; for those, a UHD 4K or UHD 4K/8K surface is recommended.

The Lumene Eden Extra Bright LT is a motorised projection screen that rises from the bottom up, designed specifically for long-throw projectors. Its ALR (Ambient Light Rejection) surface rejects more than 85% of ambient light, including light from the ceiling and sides, for a bright, high-contrast picture even in a lit room.The surface has a gain of 0.6, a 140° viewing angle and 99% colour reproduction with no hot spot, plus anti-yellowing, anti-dust and anti-wrinkle treatments. Lateral cable tensioning keeps it flat, while a black light-blocking back and black borders make the image stand out.The slim black lacquered-steel case sits on the floor on four adjustable feet that tilt it forwards or backwards, or fixes to a wall or the back of a cabinet. Two built-in handles make it easy to move, and the aluminium scissor mechanism has been tested over thousands of cycles.Ideal for living rooms, bedrooms, media rooms or meeting rooms. Recommended minimum projector brightness is 2,800 ISO lumens. The ALR LT surface is not compatible with RGB triple-laser projectors; for those, a UHD 4K or UHD 4K/8K surface is recommended.

The Lumene Eden Extra Bright LT is a motorised projection screen that rises from the bottom up, designed specifically for long-throw projectors. Its ALR (Ambient Light Rejection) surface rejects more than 85% of ambient light, including light from the ceiling and sides, for a bright, high-contrast picture even in a lit room.The surface has a gain of 0.6, a 140° viewing angle and 99% colour reproduction with no hot spot, plus anti-yellowing, anti-dust and anti-wrinkle treatments. Lateral cable tensioning keeps it flat, while a black light-blocking back and black borders make the image stand out.The slim black lacquered-steel case sits on the floor on four adjustable feet that tilt it forwards or backwards, or fixes to a wall or the back of a cabinet. Two built-in handles make it easy to move, and the aluminium scissor mechanism has been tested over thousands of cycles.Ideal for living rooms, bedrooms, media rooms or meeting rooms. Recommended minimum projector brightness is 2,800 ISO lumens. The ALR LT surface is not compatible with RGB triple-laser projectors; for those, a UHD 4K or UHD 4K/8K surface is recommended.

The Lumene Eden Extra Bright LT is a motorised projection screen that rises from the bottom up, designed specifically for long-throw projectors. Its ALR (Ambient Light Rejection) surface rejects more than 85% of ambient light, including light from the ceiling and sides, for a bright, high-contrast picture even in a lit room.The surface has a gain of 0.6, a 140° viewing angle and 99% colour reproduction with no hot spot, plus anti-yellowing, anti-dust and anti-wrinkle treatments. Lateral cable tensioning keeps it flat, while a black light-blocking back and black borders make the image stand out.The slim black lacquered-steel case sits on the floor on four adjustable feet that tilt it forwards or backwards, or fixes to a wall or the back of a cabinet. Two built-in handles make it easy to move, and the aluminium scissor mechanism has been tested over thousands of cycles.Ideal for living rooms, bedrooms, media rooms or meeting rooms. Recommended minimum projector brightness is 2,800 ISO lumens. The ALR LT surface is not compatible with RGB triple-laser projectors; for those, a UHD 4K or UHD 4K/8K surface is recommended.

The Lumene Showplace Extra Bright LT is a motorised in-ceiling projection screen designed for medium and long-throw projectors. Once the fabric is rolled up, the screen becomes almost invisible, making it ideal for premium living rooms and professional spaces.The ALR fabric carries quasi-nano optical coatings applied evenly to PVC using stretch-film technology. These reflective coatings direct natural and artificial ambient light away from the viewing zone, delivering high contrast, faithful colour and richer detail even in daytime. Gain is 0.6, viewing angle 140°, with no hotspot, a black light-blocking back and black borders.The aluminium case recesses into the ceiling for a minimal footprint, and a hook also allows suspended mounting. The tubular motor is simple, reliable and quiet, with smooth, precise movement.An IR remote with fine position adjustment is included, while the RS232 port and compatibility with the wireless Lumene 12V Trigger and RF remote (sold separately) enable full automation. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Showplace Extra Bright LT is a motorised in-ceiling projection screen designed for medium and long-throw projectors. Once the fabric is rolled up, the screen becomes almost invisible, making it ideal for premium living rooms and professional spaces.The ALR fabric carries quasi-nano optical coatings applied evenly to PVC using stretch-film technology. These reflective coatings direct natural and artificial ambient light away from the viewing zone, delivering high contrast, faithful colour and richer detail even in daytime. Gain is 0.6, viewing angle 140°, with no hotspot, a black light-blocking back and black borders.The aluminium case recesses into the ceiling for a minimal footprint, and a hook also allows suspended mounting. The tubular motor is simple, reliable and quiet, with smooth, precise movement.An IR remote with fine position adjustment is included, while the RS232 port and compatibility with the wireless Lumene 12V Trigger and RF remote (sold separately) enable full automation. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Showplace Extra Bright LT is a motorised in-ceiling projection screen designed for medium and long-throw projectors. Once the fabric is rolled up, the screen becomes almost invisible, making it ideal for premium living rooms and professional spaces.The ALR fabric carries quasi-nano optical coatings applied evenly to PVC using stretch-film technology. These reflective coatings direct natural and artificial ambient light away from the viewing zone, delivering high contrast, faithful colour and richer detail even in daytime. Gain is 0.6, viewing angle 140°, with no hotspot, a black light-blocking back and black borders.The aluminium case recesses into the ceiling for a minimal footprint, and a hook also allows suspended mounting. The tubular motor is simple, reliable and quiet, with smooth, precise movement.An IR remote with fine position adjustment is included, while the RS232 port and compatibility with the wireless Lumene 12V Trigger and RF remote (sold separately) enable full automation. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Showplace Extra Bright LT is a motorised in-ceiling projection screen designed for medium and long-throw projectors. Once the fabric is rolled up, the screen becomes almost invisible, making it ideal for premium living rooms and professional spaces.The ALR fabric carries quasi-nano optical coatings applied evenly to PVC using stretch-film technology. These reflective coatings direct natural and artificial ambient light away from the viewing zone, delivering high contrast, faithful colour and richer detail even in daytime. Gain is 0.6, viewing angle 140°, with no hotspot, a black light-blocking back and black borders.The aluminium case recesses into the ceiling for a minimal footprint, and a hook also allows suspended mounting. The tubular motor is simple, reliable and quiet, with smooth, precise movement.An IR remote with fine position adjustment is included, while the RS232 port and compatibility with the wireless Lumene 12V Trigger and RF remote (sold separately) enable full automation. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright LT is a motorised tab-tensioned projection screen designed exclusively for medium and long-throw projectors. Its 4K-optimised ALR (Ambient Light Rejecting) fabric delivers a sharp, bright image even with light in the room.Quasi-nano optical coatings and stretch-film technology give, according to the manufacturer, up to 100 times the brightness of a conventional screen. With a gain of 1.2 and a 140° viewing angle, the hotspot-free surface produces a uniform image, while black borders reinforce contrast. The back is white and not light-blocking.The white lacquered aluminium case clips quickly and securely to a wall or ceiling, and hooks allow suspended mounting. The Lumene Silent Motor ensures smooth, discreet deployment, and anti-yellowing, anti-dust and anti-wrinkle treatments keep performance consistent over time.Control comes via an IR remote with fine position adjustment, a remote IR sensor, manual buttons, an RS232 port and a 10 m 12V trigger cable. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright LT is a motorised tab-tensioned projection screen designed exclusively for medium and long-throw projectors. Its 4K-optimised ALR (Ambient Light Rejecting) fabric delivers a sharp, bright image even with light in the room.Quasi-nano optical coatings and stretch-film technology give, according to the manufacturer, up to 100 times the brightness of a conventional screen. With a gain of 1.2 and a 140° viewing angle, the hotspot-free surface produces a uniform image, while black borders reinforce contrast. The back is white and not light-blocking.The white lacquered aluminium case clips quickly and securely to a wall or ceiling, and hooks allow suspended mounting. The Lumene Silent Motor ensures smooth, discreet deployment, and anti-yellowing, anti-dust and anti-wrinkle treatments keep performance consistent over time.Control comes via an IR remote with fine position adjustment, a remote IR sensor, manual buttons, an RS232 port and a 10 m 12V trigger cable. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright LT is a motorised tab-tensioned projection screen designed exclusively for medium and long-throw projectors. Its 4K-optimised ALR (Ambient Light Rejecting) fabric delivers a sharp, bright image even with light in the room.Quasi-nano optical coatings and stretch-film technology give, according to the manufacturer, up to 100 times the brightness of a conventional screen. With a gain of 1.2 and a 140° viewing angle, the hotspot-free surface produces a uniform image, while black borders reinforce contrast. The back is white and not light-blocking.The white lacquered aluminium case clips quickly and securely to a wall or ceiling, and hooks allow suspended mounting. The Lumene Silent Motor ensures smooth, discreet deployment, and anti-yellowing, anti-dust and anti-wrinkle treatments keep performance consistent over time.Control comes via an IR remote with fine position adjustment, a remote IR sensor, manual buttons, an RS232 port and a 10 m 12V trigger cable. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright LT is a motorised tab-tensioned projection screen designed exclusively for medium and long-throw projectors. Its 4K-optimised ALR (Ambient Light Rejecting) fabric delivers a sharp, bright image even with light in the room.Quasi-nano optical coatings and stretch-film technology give, according to the manufacturer, up to 100 times the brightness of a conventional screen. With a gain of 1.2 and a 140° viewing angle, the hotspot-free surface produces a uniform image, while black borders reinforce contrast. The back is white and not light-blocking.The white lacquered aluminium case clips quickly and securely to a wall or ceiling, and hooks allow suspended mounting. The Lumene Silent Motor ensures smooth, discreet deployment, and anti-yellowing, anti-dust and anti-wrinkle treatments keep performance consistent over time.Control comes via an IR remote with fine position adjustment, a remote IR sensor, manual buttons, an RS232 port and a 10 m 12V trigger cable. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright LT is a motorised tab-tensioned projection screen designed exclusively for medium and long-throw projectors. Its 4K-optimised ALR (Ambient Light Rejecting) fabric delivers a sharp, bright image even with light in the room.Quasi-nano optical coatings and stretch-film technology give, according to the manufacturer, up to 100 times the brightness of a conventional screen. With a gain of 1.2 and a 140° viewing angle, the hotspot-free surface produces a uniform image, while black borders reinforce contrast. The back is white and not light-blocking.The white lacquered aluminium case clips quickly and securely to a wall or ceiling, and hooks allow suspended mounting. The Lumene Silent Motor ensures smooth, discreet deployment, and anti-yellowing, anti-dust and anti-wrinkle treatments keep performance consistent over time.Control comes via an IR remote with fine position adjustment, a remote IR sensor, manual buttons, an RS232 port and a 10 m 12V trigger cable. Note: the ALR LT fabric is not compatible with RGB triple-laser projectors, as it can cause colour casts. For such projectors a UHD 4K or UHD 4K/8K fabric is recommended.

The Lumene Coliseum Extra Bright UST is a motorised, retractable projection screen designed exclusively for ultra-short-throw projectors. It delivers a large, bright and contrasty picture even in broad daylight, turning your living room into a screening room.Its ALR (Ambient Light Rejecting) surface rejects unwanted room light. Its low gain maintains excellent contrast while making the most of the typically high brightness of UST projectors. A 160° viewing angle lets every viewer enjoy every detail wherever they sit, while black borders enhance contrast.Anti-yellowing, anti-dust and anti-warping treatments ensure consistent performance over time, and side tension on the deployed surface keeps it excellently flat. Movement is driven by the quiet Lumene Silent Motor.The white lacquered aluminium housing mounts on a wall, a ceiling or suspended, with fast, secure clips. Control options include RS232, a remote with fine position adjustment, a built-in infrared receiver with a remote IR sensor, a 12 V trigger cable and manual Up/Stop/Down buttons.

High backrest for maximum comfort (+10 cm compared to LUXURY II)USB socket for charging your smartphone/tabletRefrigerated cup holder with adjustable LED lightingLED under the chairAll LEDs can be switched on and offControl panel (LED and chair position)Storage space in the armrest

High backrest for maximum comfort (+10 cm compared to LUXURY II)USB socket for charging your smartphone/tabletRefrigerated cup holder with adjustable LED lightingLED under the chairAll LEDs can be switched on and offControl panel (LED and chair position)Storage space in the armrest

The Lumene Hollywood Luxury III range offers contemporary cinema seating for the living room or a dedicated home cinema. It is available as a single armchair, as a two-seat Love Chair without a central armrest, and in two- and three-seat configurations with intermediate armrests, upholstered in natural buffalo leather or synthetic leather.A frame of steel, wood and plywood makes it extremely sturdy. Seat, back and armrests are filled with cut foam blocks of different densities: firmer foam in the seat for good support and softer foam in the back for comfort. The backrest is 10 cm taller than on the Luxury II, for better neck support.Backrest and footrest recline electrically via a quiet motor, while a touch panel on the armrest controls position and lighting. Each seat has a chilled cup holder with LED lighting, a powered USB port for charging a phone or tablet, and a storage pocket in the armrest.LED ambient lighting under the seats creates a soft blue glow that reduces eye fatigue during high-contrast HDR viewing and helps you move around the room without switching on the main lights.

The Lumene Hollywood Luxury III range offers contemporary cinema seating for the living room or a dedicated home cinema. It is available as a single armchair, as a two-seat Love Chair without a central armrest, and in two- and three-seat configurations with intermediate armrests, upholstered in natural buffalo leather or synthetic leather.A frame of steel, wood and plywood makes it extremely sturdy. Seat, back and armrests are filled with cut foam blocks of different densities: firmer foam in the seat for good support and softer foam in the back for comfort. The backrest is 10 cm taller than on the Luxury II, for better neck support.Backrest and footrest recline electrically via a quiet motor, while a touch panel on the armrest controls position and lighting. Each seat has a chilled cup holder with LED lighting, a powered USB port for charging a phone or tablet, and a storage pocket in the armrest.LED ambient lighting under the seats creates a soft blue glow that reduces eye fatigue during high-contrast HDR viewing and helps you move around the room without switching on the main lights.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Embassy HD is a motorized video projection screen that will seduce you with its simplicity and robustness. Easy to install, it offers a clear, precise and pleasant image. To offer an unforgettable cinematic experience, the image must be perfect. Lumene therefore offers a selection of flawless fabrics for unparalleled sharpness. They are worked with different gains allowing you to manage your contrasts with precision. The Embassy HD has black borders on all its canvases to precisely define the frame of the image and help avoid unwanted reflections. The contrast impression is then considerably enhanced.Adaptable, the fabric is extended to match your interior for high ceiling installations, this is called extra-drop. It’s also possible to install your screen in front of a window, as Lumene fabrics have an opaque black backing to prohibit any light permeating through. The quality of a video projection screen also depends on its housing. At Lumene we have chosen aluminium for its lightness, solidity and anti-corrosion properties. The finish is also lacquered to avoid dust deposits and facilitate easy maintenance of your screen.The integrated motor system is robust whilst quiet and reliable. The Embassy HD will also integrate very well with the decoration of your interior, so once you’ve found the space of your choice, installing your screen is quick and easy. The Embassy HD can be hung on the wall or ceiling using a screw fastening system. Your comfort is our priority, so we’ve designed an infared remote control for easy operation and an RS232 Communication Technology serial port to allow intuitive home automation integration and the ultimate in convenience. All our screen canvases are treated to avoid yellowing and are guaranteed for 2 years. Our after-sales service ensures fast and efficient handling so all you have to do is to relax and enjoy the show.Projection surface: Lumene HD canvasGain: 1.0Directivity: 160°.Black back: YesProcessing: Anti yellowing, Anti dust, Anti warpingBlack edges on sides (mm): 50Low black edge (mm): 55High black edge (mm): 80Housing: AluminiumRemote control: includedConnectivity: RS232IR offset: suppliedClip fasteners: YesWarranty: 2 years.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Embassy HD is a motorised projection screen offering features rarely found at this price point. It comes in several sizes and three aspect ratios: 16:9, 4:3 and 2.35:1 cinemascope, so it suits a wide range of rooms and projectors.The 0.64 mm PVC and fibreglass surface has a gain of 1.0, no hotspot and a treatment designed for accurate colour reproduction. Black borders improve perceived contrast, while the wide viewing angle (150° on 16:9, 160° on 4:3 and 2.35:1) delivers a bright, contrasty picture to every seat, ideal for HD 1080p films.The white, lightly pearlescent lacquered steel case can be fixed to a wall or ceiling. The black-backed, light-blocking fabric even allows installation in front of a window with no light bleed once the screen is lowered, and the generous extra drop helps position the image at the right height.An infrared remote with batteries and a remote IR sensor are included, along with manual Up, Stop and Down controls. Depending on the case version, the screen uses a tubular motor with an RS232 port or a synchronous motor.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.

The Lumene Majestic HD is a high-end motorised projection screen for home cinema enthusiasts who want an effective, easy-to-install solution for a large high-definition picture. It is available in several sizes and in 16:9, 4:3 and 2.35:1 (cinemascope) formats.The projection surface is made of PVC with glass fibre and is treated to optimise the picture and respect the colour accuracy of HD images. With a gain of 1.0 and a 160° viewing angle, every viewer enjoys a bright, contrasty image wherever they sit. The black blackout backing lets you deploy the screen in front of a window without light bleeding through, while the black borders improve perceived contrast.The housing is white-lacquered aluminium and contains a Lumene tubular motor that is simple, reliable and quiet. Quick clip mounting makes installation easy on a wall or ceiling, and for very high ceilings the screen can also be suspended using the supplied hook.Control is via an infrared remote with fine position adjustment, manual Up/Stop/Down buttons, or automatically through the 12V trigger input: connected to the projector (10 m cable supplied), the screen comes down when the projector powers on and retracts when it switches off. An RS232 interface allows integration into home automation systems.