go to top icon

Electrocompaniet

All products - Electrocompaniet

Filters
8  Products

The Electrocompaniet AW250R power amplifier is known for its uncolored and excellent reproduction qualities. From the first note of any familiar recording, you will be captivated by the AW250R and by the musical enjoyment it will give you.The AW250R incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of conventional power supply designs, as well as first class overall circuit design and state-of-the-art components. The AW250R features a balanced link to additional power amplifier(s). Compared to more expensive High-End power amplifiers, with lesser performance, you will truly cherish the AW250R. The Electrocompaniet AW250R features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionOutput Impedance (20 Hz - 20 kHz): < 0,008 ohmXLR (balanced) input impedance: 110 kohmInput sensitivity for rated output: 1 VMax. peak current: > 100 ATHD (measured at 1 kHz half power, 8 W): < 0,001 %THD (measured at 1 kHz -1 dB, 8 W): < 0,001 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 90 µV, 10 Hz - 30 kHz : 100 µV   Rated output power  8 ohms: 2 x 250 W4 ohms: 2 x 380 W2 ohms: 2 x 625 W1 ohms: 2 x 1100 W Power consumption (no load or signal) 230 W Dimensions  Width 483 mm / 19 inchesDepth 450 mm / 17 inchesHeight 210 mm / 8.2 inchesWeight 39 kg. / 85.8 lbs.

8.399 €
Interest Free Instalments 2.799,67€ / month
Upon Order

The Electrocompaniet AW180M monaural power amplifier represents the ultimate fidelity in sound reproduction.Audiophiles, recording engineers, record producers and reviewers around the world rely on the AW180M’s faithful reproduction of the original master recording.The stunning capabilities of the Electrocompaniet AW180M cannot be explained – they have to be experienced.The AW180M incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply, a first class overall circuit design and state-of-the-art components.The Electrocompaniet AW180M features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionOutput Impedance: (20 Hz - 20 kHz) < 0,008 ohmRCA (single) input impedance: 220 kohmXLR (balanced) input impedance: 110 kohmInput sensivity for rated output: 1 VMax. peak current: > 100 ATHD (measured at 1 kHz half power, 8 W): < 0,001 %THD (measured at 1 kHz -1 dB, 8 W): < 0,001 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 90 µV, 10 Hz - 30 kHz : 100 µV   Rated output power  8 ohms: 250 W4 ohms: 380 W2 ohms: 625 W   Power consumption (no load or signal) 115 W   Dimensions  Width: 215 mm / 8.5 inchesDepth: 470 mm / 18.5 inchesHeight: 288 mm / 11.3 inchesWeight: 22 kg. / 48.4 lbs.

5.499 €
Interest Free Instalments 1.833,00€ / month
Upon Order

The Electrocompaniet AW400 is a powerful mono amplifier, with a characteristic fast and clean sound. The poweramplifier is analytic, and build for dynamic reproduction for low level as well as high level playback.The Electrocompaniet AW400 power amplifier is based on the design philosophy of the highly acclaimed AW180 M monaural power amplifier.The  AW400 incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply. First class overall circuit design and state-of-the-art components. Uncompromising sonic and mechanical quality.A 650 VA FTT transformer and a current reservoir of 150.000uF delivers 1 x 400 W of clean and powerful dynamics into an 8 Ohms load. Just like the rest of our power amplifiers, the AW 400 is stable down to 0,5 Ohms. The Electrocompaniet AW 400 features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionClipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%Input Impedance (Fixed): 330 kohmOutput Impedance (20 Hz-20kHz): < 0,01 OhmFrequency response (DC - 65 kHz): - 3 dBInput level for rated output: 1 V RMSMax. peak current: > 150 ATHD(measured at 1 kHzhalf power,8W): < 0,006 %THD (measured at 1 kHz -1 dB, 8 W): < 0,007 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 130 µV, DC - 30 kHz : 200 µV Rated output power  8 ohms: 4004 ohms: 7652 ohms: 1010   Power consumption(no load or signal) 230 W Dimensions  Width: 358 mm / 14.1 inchesDepth: 470 mm / 18.5 inchesHeight: 261 mm / 10.2 inchesWeight: 25 kg. / 55 lbs.

7.499 €
Interest Free Instalments 2.499,67€ / month
Upon Order

The Electrocompaniet AW600 monaural power amplifier represents the ultimate fidelity in sound reproduction. Audiophiles, recording engineers, record producers and reviewers around the world rely on the AW180M’s faithful reproduction of the original master recording.The stunning capabilities of the Electrocompaniet AW600 cannot be explained – they have to be experienced.The AW600 incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply, a first class overall circuit design and state-of-the-art componentsPower and control, but with a liquid, spacius and effortless aproach that removes any hint of electronic interference, leaving only sheer, clear music in their wake. Extreme sonic value for money, they set a new standard for power amplification. Specifications: Amplifier sectionClipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%Input Impedance (Fixed): 330 kohmOutput Impedance (20 Hz-20kHz): < 0,009 OhmFrequency response (DC - 65 kHz): - 0.4 dBInput level for rated output 1 V RMSMax. peak current: > 150 ATHD(measured at 1 kHzhalf power,8W): < 0,001 %THD (measured at 1 kHz -1 dB, 8 W): < 0,0015 %Noise (measured with bothinputsshorted): 400 Hz - 30 kHz : 150 µV, DC - 30 kHz : 200 µVDamping factor (20 Hz - 20 kHz): > 850  Rated output power  8 ohms: 600 W4 ohms: 1200 W   Power consumption(no load or signal) 230 W   The NEMO is DC coupled from input to output   Dimensions  Width: 465 mm / 18.3 inchesDepth: 450 mm / 17.7 inchesHeight: 288 mm / 11.3 inchesWeight: 41 kg. / 90.2 lbs.

9.749 €
Interest Free Instalments 3.249,67€ / month
Upon Order

This integrated amplifier is a new design, combining the highest performance with the cost and quality benefits made possible by our state-of-the-art production facilities. The PI-1 delivers 50 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs.To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control.The PI-1 is equipped with a big linear power supply with a 300VA toroidal transformer and a capacitor storage bank of 40.000 uF. Specifications:Input impedance: Balanced input 47KohmOutput impedance: 0.03 ohmNoise floor: 20 - 20 kHz < - 100 dBFrequency response: - 3 dB 1 - 200 kHzChannel separation: > 120 dBTHD + N 20 - 20 kHz < 0.006% Maximum peak current:  > 50ADamping factor: 8 ohm load >250Rated output power: THD = 0.2%  into 8 ohm: 2 x 50 Winto 4 ohm: 2 x 75 Winto 2 ohm: 2 x 100 WToroid transformer: 300VA  Capacitor storage bank: 40.000uF  Dimensions W x D x H: 420 x 340 x 77 mm Weight: 6 kgPower consumption: No load or signal: 100 WInputs: 2 x 2 Channel Balanced (XLR) 2 x 2 Channel Single EndedControl ports: NoneOutputs: Loudspeakers

1.850 €
Interest Free Instalments 616,67€ / month
Upon Order

Essentially the same design as the PI-1, but with a more powerful power supply. A lot of effort was put into developing an amplifier that delivers high-end performance at a modest price point. The PI-2 has a rated output of 100 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs.To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control. The PI-2 is equipped with a oversized linear power supply with a 400VA toroidal transformer and a capacitor storage bank of 80.000 uF. Specifications:Input impedance: Balanced input 47KohmOutput impedance:   0.03 ohmNoise floor: 20 - 20 kHz < - 100 dBFrequency response - 3 dB 1 - 200 kHzChannel separation: > 120 dBTHD + N  20 - 20 kHz < 0.006%Maximum peak current: > 50ADamping factor: 8 ohm load >250Rated output power: THD = 0.2% into 8 ohm:   2 x 100 Winto 4 ohm:   2 x 150 Winto 2 ohm:   2 x 220 W Toroid transformer :  400VA     Capacitor storage bank:   80.000uFDimensions W x D x H: 420 x 340 x 77 mm  Weight: 10 kgPower consumption: No load or signal 100 WInputs:   2 x 2 Channel Balanced (XLR)  2 x 2 Channel Single EndedControl ports:   NoneOutputs:   Loudspeakers

2.450 €
Interest Free Instalments 816,67€ / month
Upon Order

Essentially the same design as the PI-1, but with a more powerful power supply. A lot of effort was put into developing an amplifier that delivers high-end performance at a modest price point. The PI-2 has a rated output of 100 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs.To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control. The PI-2 is equipped with a oversized linear power supply with a 400VA toroidal transformer and a capacitor storage bank of 80.000 uF. Specifications:Input impedance: Balanced input 47KohmOutput impedance:   0.03 ohmNoise floor: 20 - 20 kHz < - 100 dBFrequency response - 3 dB 1 - 200 kHzChannel separation: > 120 dBTHD + N  20 - 20 kHz < 0.006%Maximum peak current: > 50ADamping factor: 8 ohm load >250Rated output power: THD = 0.2% into 8 ohm:   2 x 100 Winto 4 ohm:   2 x 150 Winto 2 ohm:   2 x 220 W Toroid transformer :  400VA     Capacitor storage bank:   80.000uFDimensions W x D x H: 420 x 340 x 77 mm  Weight: 10 kgPower consumption: No load or signal 100 WInputs:   2 x 2 Channel Balanced (XLR)  2 x 2 Channel Single EndedControl ports:   NoneOutputs:   Loudspeakers

2.450 €
Interest Free Instalments 816,67€ / month
Upon Order

The ECI 6DS is a powerful integrated amplifier, equipped with a number of analogue and digital inputs offering  a wide range of connectivity.The built-in media streaming unit is fully compatible with established standards like UPnP and DLNA. The ECI 6DS  enables you listen to nearly all formats with musical content from your home computer network, internet radio or different types of USB and NAS- storage devices.  With its high performance sample rate converter and D/A converter the ECI6 DS is able to improve all of your digital sources like TV’s, cable- and satellite tuners, CD/DVD/Blu-Ray players and not to forget your computer and media player. Independent of their native resolution all digital sources will be upsampled to 24bit/ 192kHz and can be connected by SPDIF, USB or Toslink. The new ECI6 DS offers 2 x 125 Watts and is based on the successful ECI 5 MK II.  To make it even better we have equipped with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable to control a wide range of speakers in the marked.  Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) inputs. Two preamplifier outputs, one balanced and one single ended, making sure the amplifier is prepared for future extensions. The advanced ECT4 system remote controller will give you full control, not only on the ECI 6DS, but also on your TV, Blu-Ray and PVR. The ECT4 system remote control has a graphical interface that makes it easy to browse through your music collection, it displays the cover art from your music connection and internet radio stations.The ECI 6DS offers extended UPnP support for external control by Windows, Android or Apple  APP’s such as Bubble UPnP, Songbook, Plugplayer or Kinsky or Sync:Stream. Specifications:  Digital section  D/A converter: 24 bit/192 kHzSample rate converter: 24bit / 192kHzInputs: SPDIF, 2x Toslink, 1x USBUSB: asynchronous up to 24bit/ 192kHz supportedSPDIF: 24bit/ 192kHzToslink: 24bit/ 96kHzWi-Fi / LAN transfer: 24bit/ 192kHzWi-Fi: b/g/n, SGA- connector for external antennaLAN: 10 / 100MBit/s  DHCP and Auto IP supportSupported standards: DLNA, UPnP, vTuner.Supported audio formats:          MP3 up to 320kBit/s, WAV, AIFF, PCM up to 24bit/192kHz, FLAC 24bit/192kHz, OGGVorbis, WMA standard, AAC / M4A   Preamplifier section  Input impedance ( Balanced input ) 47KohmMaximum input level 10 Volt RMSNoise floor ( 1Vrms, 20 - 20 kHz, balanced)-135 dBTHD + N:   (1Vrms, 20 - 20 kHz, balanced)    120 dBTHD ( 20 - 20 kHz): < 0.004%Maximum peak current: >100ADamping factor  8 ohm load >350I Input sensitivity: 120W output 1.3VrmsInput sensitivity HT: 120W output 1VrmsGain HT Input x36 (31 dB)Rated output power  8 ohms: 2 x 125 W4 ohms: 2 x 200 W2 ohms: 2 x 370 WPower consumption               110 WStandby 1WDimensions  Width: 465 mm / 18.3 inchesDepth: 405 mm / 16 inchesHeight: 128 mm / 5 inchesWeight: 20Kg / 44 lbs. 

6.100 €
Interest Free Instalments 2.033,33€ / month
Upon Order