Audio Technica ATN95E

Audio Technica ATN95EX

The Audio-Technica ATN95EX is a genuine replacement stylus for the AT95EX cartridge, with a 0.3 × 0.7 mil elliptical diamond on a bonded round shank. It restores your cartridge’s clear, detailed sound and protects your records from wear.When to replace the stylusAn elliptical stylus lasts approximately 300 hours of play. If the sound becomes dull or distorted, it is time to replace it.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

48 ,5 €

Audio Technica ATN91

The Audio-Technica ATN91 is a genuine replacement stylus for the AT91 cartridge. It also fits the discontinued CN5625AL and AT90 cartridges, so you can keep using your cartridge with a fresh stylus.Upgrade for the AT3600LThe ATN91 can also be used as an upgrade on the AT3600L cartridge. Note: with the ATN91, the AT3600L needs a tracking force of 2 g, so do not replace the ATN3600L with it if your tonearm does not allow tracking force adjustment.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

26 ,5 €

Audio Technica ATN91R

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

31 ,5 €

Audio Technica ATN3600L

The Audio-Technica ATN3600L is a genuine replacement stylus for the AT3600 series cartridges and for the Audio-Technica AT-LP60 and AT-LP60USB turntables. A new stylus restores your turntable’s clear sound and protects your records from wear.CompatibilityIt fits the AT3600, AT3600L, AT3601, AT3651, AT3650L, AT3650C, AT3650 and AT3626 cartridges, as well as the AT-LP60 and AT-LP60USB turntables.When to replace the stylusThe stylus tip wears gradually with use. If the sound becomes dull or distorted, or if the stylus has been knocked or bent, it is time to replace it so your record grooves are not damaged.Easy to changeThe old stylus slides out by gently pulling it forward and the new one pushes into place, with no tools and no adjustment.

22 €

Audio Technica ATN3600LE

The Audio-Technica ATN3600LE is a replacement stylus with a 0.3 × 0.7 mil elliptical tip for the AT3600L cartridge. It is the easiest sound upgrade for any turntable using the ATN3600L or ATN3600LC conical stylus: more detail, cleaner highs and less distortion, without changing the cartridge.Compatible Audio-Technica turntablesAT-LP60X series (including AT-LP60XBT and AT-LP60XUSB), AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT and AT-PL50. It also fits other brands’ turntables with an AT3600L cartridge: check your turntable’s manual.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools. Recommended tracking force 3.0 – 4.0 g (3.5 g standard), stylus life approximately 300 hours.

32 €

Audio Technica AT-VMN95E

The Audio-Technica AT-VMN95E is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95E cartridge and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

42 ,5 €

Audio Technica AT-VMN95C

The Audio-Technica AT-VMN95C is a genuine VM95 Series replacement stylus with a conical tip (0.6 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95C cartridge and fits every VM95 cartridge, as well as the AT-LP70XBT and AT-LP70X turntables fitted with the AT-VM95C.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA conical stylus lasts approximately 500 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

24 €

Audio Technica AT-VMN95EN

VM95 series Elliptical Nude replacement stylus Aluminium cantilever Elliptical Nude Stylus Nude Round Shank VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C,AT-VMN95E,AT-VMN95EN,AT-VMN95ML,AT-VMN95SH,AT-VMN95SP Elliptical Nude Stylus Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

119 €