Audio Technica ATN3600L

Audio Technica ATN3600LC

Replacement stylus for the Audio-Technica AT3600L cartridge Trusted by countless music lovers for more than 50 years, it features a new modern design while maintaining the ease of use, reliability, and sound quality that have made it the replacement stylus of choice for so many turntables. The 0.6 mil conical stylus ensures proper contact with the record groove, even when the cartridge is not completely level.

22 €

Audio Technica ATN3600LE

The Audio-Technica ATN3600LE is a replacement stylus with a 0.3 × 0.7 mil elliptical tip for the AT3600L cartridge. It is the easiest sound upgrade for any turntable using the ATN3600L or ATN3600LC conical stylus: more detail, cleaner highs and less distortion, without changing the cartridge.Compatible Audio-Technica turntablesAT-LP60X series (including AT-LP60XBT and AT-LP60XUSB), AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT and AT-PL50. It also fits other brands’ turntables with an AT3600L cartridge: check your turntable’s manual.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools. Recommended tracking force 3.0 – 4.0 g (3.5 g standard), stylus life approximately 300 hours.

32 €

Audio Technica ATN95E

The Audio-Technica ATN95E is a genuine replacement stylus for the classic AT95E cartridge, one of the most widely used phono cartridges. It also fits the discontinued AT93 and AT95 cartridges.When to replace the stylusThe stylus tip wears gradually with use. If the sound becomes dull or distorted, it is time to replace it so your record grooves are not damaged.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools and no new setup.

34 €

Audio Technica ATN95EX

The Audio-Technica ATN95EX is a genuine replacement stylus for the AT95EX cartridge, with a 0.3 × 0.7 mil elliptical diamond on a bonded round shank. It restores your cartridge’s clear, detailed sound and protects your records from wear.When to replace the stylusAn elliptical stylus lasts approximately 300 hours of play. If the sound becomes dull or distorted, it is time to replace it.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

48 ,5 €

Audio Technica ATN91

The Audio-Technica ATN91 is a genuine replacement stylus for the AT91 cartridge. It also fits the discontinued CN5625AL and AT90 cartridges, so you can keep using your cartridge with a fresh stylus.Upgrade for the AT3600LThe ATN91 can also be used as an upgrade on the AT3600L cartridge. Note: with the ATN91, the AT3600L needs a tracking force of 2 g, so do not replace the ATN3600L with it if your tonearm does not allow tracking force adjustment.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

26 ,5 €

Audio Technica ATN91R

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

31 ,5 €

Audio Technica AT-VMN95C

The Audio-Technica AT-VMN95C is a genuine VM95 Series replacement stylus with a conical tip (0.6 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95C cartridge and fits every VM95 cartridge, as well as the AT-LP70XBT and AT-LP70X turntables fitted with the AT-VM95C.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA conical stylus lasts approximately 500 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

24 €

Audio Technica AT-VMN95E

The Audio-Technica AT-VMN95E is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95E cartridge and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

42 ,5 €