Audio-Technica AT33xMONO/I

Audio Technica AT-OC9XML

Dual moving coil stereo cartridge with Microlinear stylus AT-OC9XML Dual moving coil stereo cartridge with Microlinear stylus - Features nude Microlinear stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartridge body The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Microlinear complex diamond profile enabling higher frequency response, detail like never before experienced and limiting inner groove distortion. Microlinear diamond profile provides low record and stylus wear. Features nude Microlinear stylus and boron cantilever which provides lower distortion and high transient response A neodymium magnet and permendur yoke provides dramatically increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer  Microlinear Stylus Microlinear diamond profile offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli. Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

599 €

Lyra Delos

While vinyl records played back with an MC cartridge can sound exceptionally good, it is a surprising fact that the design of conventional MCs restricts the sound quality that can be achieved from LPs. An essential factor for proper operation of an MC cartridge is the angle between the magnetic circuit, signal coils and core. Performance is optimal when the angles are all aligned, but any significant difference in the angles will cause the formation of a strong and directional flux that will flow constantly from the magnetic circuit into the signal core. This directional magnetic flux will orient the core toward a specific direction and make it impossible for the core to move with equal ease in all directions, which is necessary for proper cartridge performance. Unfortunately, conventional MC cartridges have been designed so that the angles between magnetic circuit, signal coils and core become aligned only when tracking force is not applied. The result is that during playback, the required tracking force causes the angle between magnetic circuit, signal coils and core to become misaligned. This limits the cartridge’s resolution, tracking ability and dynamic range.The new Lyra Delos is designed to conquer this problem. Compared to conventional cartridges, the Delos has a new body structure with an unusually shallow angle, and this has been paired with a unique asymmetrical damping system. When no tracking force is applied, the shape of the asymmetrical dampers forces the signal coils and core into a more upright angle than the magnetic circuit.However, no tracking force applied means that the cartridge is not operating, and therefore any angular discrepancies between magnetic circuit, signal coils and core will have no effect on performance. When tracking force is applied, however, the force of the stylus pushing on the LP causes the asymmetrical dampers to be deformed into a symmetrical shape, and when this happens the angular discrepancies between magnetic circuit, signal coils and core all disappear. Since tracking force applied means that the cartridge is now operating, it should be clear that the design of the Delos is able to keep the angles between the magnetic circuit, signal coils and core aligned during playback.Keeping the proper angular alignment prevents the formation of any strong and directional flux that could otherwise flow constantly from the magnetic circuit into the signal core, and enables the Delos’ core to move with equal ease in all directions, for optimal performance.The Delos also has a microridge stylus on a boron cantilever for outstanding tracking, a non-parallel solid machined metal body for low resonances, and 6-N high-purity copper coils and nude construction for greater clarity. The result is clearly improved sound quality, particularly resolution, tracking ability, dynamic range, transient impact and immediacy.Feel free to audition the Lyra Delos, and hear how good a New Angle can make your LPs sound.

1.790 €

Dynavector DV-20 X2H

For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridges. Notably high output models that are designed to work with MM inputs negating the necessity for equipment change or the use of setup devices required for low output cartridges. The outstanding performance of the Dynavector high output moving coil cartridges can be attributed to the exclusively Dynavector designed coil winding machine capable of utilizing extremely fine coil wire providing a high output to mass ratio.Features and ImprovementsDV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20X2H a healthy 2.8 mV output - suitable for most MM inputs. The high output model is well suited to valve preamplifiers or electronics that only offer MM inputs.

1.250 €

Hana SL

Hana SL is the most reviewed and awarded Hana cartridge to date. It is distinguished by its black body and a Shibata stylus expertly mounted to its aluminum cantilever. The Hana SL features tighter channel balance, greater channel separation, and improved high-frequency extension. “A first-class MC cartridge” – STEREO (Germany)  “Remarkably smooth frequency response…terrific value for the money.” – HiFi World (UK) “In the same class as a cartridge costing 10x the price.” – TNT Audio (France) Stereophile Recommended Component USA The Absolute Sound USA Golden Ear Award 2017Rocky Mountain International HiFi Press Award winner  2018 and 2019

750 €

Deal

Hana EH - high output

The Hana EH high-output moving coil cartridge represents the best way to upgrade from “starter” MM cartridges that typically come packaged with most entry-level turntables. Weighing in at only 5 grams, and possessing great tracking ability, the Hana EH cartridge’s distinctive moss green body houses a special cross-coil generator, reproducing great bass and dynamics. The elliptical stylus mounted to an aluminum cantilever easily extracts the music in the groove as it effortlessly traces you LPs.The EH is plug-and-play compatible with MM phono stages found in integrated amplifiers and AV receivers. 

480 €

Denon DL-103

The Denon DL-103 is Denon's classic moving coil (MC) cartridge, in production since 1964. It has been a reference standard for decades, with lively, natural and balanced sound.A legend of analogue soundFew cartridges have travelled the road of the DL-103. Designed by Denon in 1964 as its first moving coil cartridge, it remains in production today with essentially the same simple, functional design. Its longevity is not down to nostalgia but to a combination of reliability and musicality that has made it a reference for generations of vinyl listeners around the world.Born for professionalsThe DL-103 was originally developed for radio broadcasters, where cartridges had to withstand daily, intensive use and always perform the same way. Those demands shaped a robust, predictable tool that is equally at home in a modern domestic system.Hand-builtIts coils are wound by hand at Denon's Shirakawa factory in Japan, a process that calls for experience and patience. Every unit also passes the sonic check of the company's sound master before it leaves the factory.Simple, timeless formThe plain body, weighing 8.5 g, has no decorative elements. Every detail serves secure mounting in the headshell and the correct transfer of vibration from the stylus to the signal-generating mechanism.A sound with characterThe DL-103 delivers warm, musical sound with finesse and detail, while small imperfections on the record stay in the background. Voices and acoustic instruments gain body and naturalness, and listening stays relaxed even after hours.Moving coil technologyIn moving coil cartridges, the coils sit on the stylus assembly and move within a fixed magnetic field. The low moving mass allows the stylus to follow the groove modulations with great sensitivity. The DL-103 applies this principle through a simple, proven design that its measurements confirm.Diamond and cantileverThe stylus has a conical tip of solid nude diamond with a radius of about 16 µm, mounted on a tapered aluminium cantilever. This combination transfers groove vibration accurately and is forgiving of records that are not in perfect condition, such as well-loved older pressings.Copper coilsThe copper coils convert motion into an electrical signal with an output voltage of 0.3 mV at 1 kHz and an output impedance of 40 Ω. The low voltage is typical of the category and reflects the small, light coil assembly that moves together with the stylus.Wide responseFrequency response extends from 20 Hz to 45 kHz, well beyond the audible range. Channel separation reaches 25 dB at 1 kHz and channel balance is better than 1 dB, for a stable, accurate stereo image.Low complianceWith a dynamic compliance of 5 x 10⁻⁶ cm/dyne at 100 Hz, the suspension is relatively stiff, a hallmark of a classic design for professional use. This firm suspension is also why the cartridge pairs ideally with heavier tonearms, as explained below.Getting the best from your systemTo bring out the abilities of the DL-103, it needs to be properly matched with the tonearm and preamplifier. Its characteristics are clear-cut, so choosing partnering components is straightforward, and the result rewards anyone who spends a little time on set-up. Our team can help you find the right combination.Medium to high mass tonearmBecause of its low compliance and 8.5 g weight, the DL-103 performs best in tonearms with medium to high effective mass. It fits any headshell with a standard two-screw mount, so it works with most turntables on the market.Tracking forceThe recommended tracking force ranges from 2.3 to 2.7 g, with a typical value of 2.5 g. Careful adjustment with a precision gauge ensures correct groove tracing and even stylus wear. Check the alignment with a protractor too, so the tip sits correctly in the groove.Preamplifier for MCThe low output voltage calls for a phono preamplifier with an MC input or a step-up transformer. A quality mid to high-end phono stage will bring out its musicality, dynamics and detail.An upgrade that lastsFor many listeners the DL-103 is the first step into the world of moving coil, and a cartridge they keep for years. Its long presence on the market also means there is a wealth of experience among listeners and technicians on how to get the most from it.

349 €

Denon DL-110

The Denon DL-110 is a high-output moving coil cartridge that connects directly to an MM phono input. It offers the detail of an MC cartridge without needing an MC preamplifier or step-up transformer.Moving coil without limitsThe DL-110 opens the world of moving coil cartridges to listeners who until now assumed that such an upgrade also means changing preamplifier. Denon, which has been making turntable cartridges for more than six decades, designed it to combine the detail of MC technology with the ease of a cartridge that connects to almost any system, with no additional components or cost.Hand-made in JapanThe DL-110 is still made by hand at Denon's Shirakawa Audio Works factory in Japan. Hand assembly provides the fine precision demanded by the tiny coils and the alignment of the stylus.Light and compactWeighing just 4.8 g, the DL-110 is noticeably lighter than the classic cartridges of the 103 series. This broadens its compatibility with the tonearms of most modern turntables, from simple to more advanced models, making it an easy upgrade for many existing set-ups.Sonic characterThe cartridge retrieves a great deal of information from the groove, with a good sense of rhythm and a balanced tonal character. Music sounds lively and well organised without becoming tiring over long sessions.Tuned by the sound masterEvery unit passes the sonic check of Denon's sound master before it reaches the shelf. Performance therefore stays consistent from unit to unit and worthy of the company's long tradition in turntable cartridges.High-output technologyMost moving coil cartridges deliver a very low signal that calls for a dedicated gain stage. The DL-110 takes a different approach: it keeps the light moving assembly of an MC but produces a strong enough signal to drive an ordinary MM phono input comfortably. Its design relies on carefully chosen materials and geometry.1.6 mV outputWith an output voltage of 1.6 mV at 1 kHz and an output impedance of 160 Ω, the DL-110 works with the majority of phono inputs. This level is high enough for an MM input without a step-up transformer or a dedicated MC preamplifier.Elliptical nude diamondThe stylus has a special elliptical tip of solid nude diamond, mounted on an aluminium cantilever. The elliptical profile makes closer contact with the groove walls and reads fine modulations more accurately, particularly towards the inner grooves of the record.Wide responseFrequency response extends from 20 Hz to 45 kHz. Channel separation exceeds 25 dB at 1 kHz and channel balance is better than 1 dB, for a stable stereo image with clearly placed instruments.Copper coilsCopper coils accurately convert the movement of the stylus into an electrical signal. The high output is achieved without sacrificing the delicacy and speed of response that characterise a moving coil design, which makes a real difference in micro-dynamics.Installation and matchingThe DL-110 is one of the most flexible MC cartridges when it comes to fitting into an existing system. Whether you are upgrading the cartridge on a turntable with a built-in preamplifier or pairing it with a standalone phono stage, its requirements are simple and clear. A few basic steps are enough for it to perform at its best from the first listen.Connecting to an MM inputThe recommended load impedance is 47 kΩ, the standard value for MM inputs. The DL-110 can therefore connect directly to an amplifier's phono input or to a built-in turntable preamplifier that accepts MM cartridges.Tracking forceTracking force ranges from 1.5 to 2.1 g, with a typical value of 1.8 g. Set it with a precision gauge and check alignment with a protractor for correct tracing and even wear. The lighter force compared with the 103 series cartridges is also kind to your records.Medium mass tonearmsA dynamic compliance of 8 x 10⁻⁶ cm/dyne at 100 Hz and its low weight make it suitable for tonearms of medium effective mass. It fits with a standard two-screw mount, and the box includes screws, nuts, a screwdriver and a cleaning brush.A first step into MCFor many listeners it is the simplest way to discover the sound of moving coil, with room for future upgrades. If you later acquire a preamplifier with an MC input, the DL-110 will continue to perform just as well, since it supports both input types.

349 €

Dynavector DV-10X5 mkII - high output

First released in 1978 and recipient of the prestigious (at the time) Design and Engineering Award at the Chicago CES in both 1978 and 1981. The new Dynavector 10X5 MKII MC cartridge presents a new benchmark in High Output MC cartridge performance not requiring a step-up device or MC phono preamplifier.ImprovementsAlong with several exclusive Dynavector technologies that include Magnetic Flux Damping, Softened Magnetism (Patent) and powerful neodymium magnets that provide the smooth treble response Dynavector are renowned for.The Dynavector 10X5 MKII also features an improved stylus assembly with the nude diamond “Shibata III” line contact stylus and improved hardened cantilever material. These improvements ensure secure tracking ability over even the most torturous of record grooves whilst achieving extended high frequency response and enhanced musical resolution.The legendary Dynavector coil winding technology using the finest of wire has enabled the Dynavector 10X5 MKII to minutely increase the coil windings and achieve a reduction in impedance to 150 ohms whilst retaining a healthy 2.8mV output.Mounting the cartridge to the tonearm is achieved by a rigid red aluminium head block that provides a stable platform for the cartridge along with easy and secure fixing to the tonearm.

799 €

Audio Technica AT-OC9XSL

Dual moving coil stereo cartridge with Special Line Contact stylus AT-OC9XSL Dual moving coil stereo cartridge with Special Line Contact stylus - Features a Nude Special Line Contact stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartri. The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve. Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response A neodymium magnet and permendur yoke provides dramatically increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer  Special Line Contact Stylus Special Line Contact diamond profile offers the ultimate in accurate sonic reproduction Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

799 €