Warm Audio Jude-MP

Warm Audio Jude-MP2

Some of music’s most recognizable records of the '60s and '70s ran through the A-Range preamps in one custom Sound Techniques console at Trident Studios in London. To capture that same sound in a rack-friendly unit, Warm Audio built the Jude-MP2 stereo microphone preamp, designed in collaboration with Sound Techniques and Geoff Frost, the engineer who drew the original A-Range preamp schematic. The Jude-MP2 preserves the complete original signal path, featuring stereo dual-discrete 3035 Class-A amplifiers that provide your sources with the depth and forward push that made the Trident Studios console legendary. Additionally, the 9-position Z-Match control sets how your microphone loads the input, optimizing mic and preamp interplay for both vintage and modern microphones. Put your room mics, drum overheads, or piano pair through the Jude-MP2, and you are effectively tracking through the same console that shaped one of rock ’n’ roll's most beloved eras.The original A-Range circuitPlenty of gear has promised the Trident sound: the punch, depth, and musicality heard on some of London's most famous recordings. The Jude-MP2 is built from the actual console schematics used to produce them. In the Jude-MP2, every stage of the A-Range preamp signal path is carried over, with its dual-discrete 3035 Class-A amplifiers and proprietary 8-lead impedance-matching control reproduced channel-for-channel. The weight and midrange presence you hear on those classic Trident records came directly from this preamp circuit, and with the Jude-MP2 in your rack, your signals will track through that same circuit.Handwired, console-grade componentsSound Techniques specified this build down to the capacitor, and Warm Audio followed suit: Wima and Nichicon audio-grade capacitors, carbon resistors, and CineMag transformers wound to custom specs all populate a handwired board layout of Sound Techniques' own design. Each unit is assembled to console-grade standards, then hand-tested and inspected by Warm Audio's technicians before shipping. Preserving the integrity of the original design was crucial to Warm Audio, and it's this attention to detail and craftsmanship that gives the Jude-MP2 its authentic character.Fine-tune every mic with Z-MatchProcured from the original console design, the 9-position Z-Match control is a re-creation of Geoff Frost's 8-lead impedance-matching circuit. The Z-Match tone control changes how the preamp and the microphone interact at the input, allowing you to optimize and dial in gain, response, and character across various microphones. Z-Match behaves wonderfully across vintage ribbons and modern condensers alike, making it that much easier for you to capture the sound you're after right at the source.Warm Audio Jude-MP2 Features:Stereo microphone preamp built from the original Sound Techniques “A-Range” console preamp circuit used at Trident StudiosOfficial Sound Techniques and Warm Audio collaboration, designed by original A-Range engineer Geoff Frost from his own console schematicsComplete original signal path, including dual-discrete 3035 Class-A amplifiers, reproduced channel-for-channel for the weight and midrange presence of the original console9-position Z-Match control re-creates the original 8-lead impedance-matching circuit, optimizing mic-to-preamp interaction to fine-tune gain, response, and character across vintage and modern microphonesCustom-spec CineMag USA transformers, Wima and Nichicon audio-grade capacitors, and carbon resistors on a handwired PCB layout designed by Sound TechniquesEvery unit is individually hand-tested and inspected by trained technicians before it shipsAlso available in a mono version5-year warranty provided by Warm Audio

1.585 €

New

Warm Audio WA-273

The 1073 Legend Lives in Warm Audio's Splendid WA273The legendary 1073 wrote the book on characterful mic preamplification. This venerable circuit helped define the punchy sound of '70s rock — and countless recordings and live concerts ever since. Today, this coveted tone can be yours for a song, with the Warm Audio WA273 mic/line/instrument preamp. In both design and performance, the 2-channel WA273 pays homage to the revered British console lineage that started it all. Throughout the audio industry, the 1073 is considered the holy grail of preamps, with a rich, sweet, and bold tonality that's ideal for making audacious statements with your music. After years of R&D, painstaking reverse-engineering, and countless hours of listening, Warm Audio captured the sonic essence of this classic perfectly in their boutique WA273. With 80dB of gain and a fully discrete transformer-balanced signal path, the sound is a revelation: harmonically rich bottom end, focused midrange, and slightly resonant highs.Handcrafted with top-quality partsBoasting weapons-grade build quality with discrete, handwired Class A circuits and top-drawer parts such as UK-made Carnhill transformers, the WA273 has 80dB of gain on tap so you can capture subdued sources with your favorite ribbon mic. Your ribbons and condensers will sound heavenly; you'll even be gobsmacked when you hear how authoritative your dynamic mics sound. Cranking the input stage and backing off the output gain enhances your tracks with tasty vintage-style coloration. Topping off the feature set are per-channel instrument jacks, polarity reverse, 48V phantom power, and switchable impedance for tonal variation and to optimally match a variety of microphones.Optimize every source — and microphoneThere is no source that doesn't sound amazing through the Warm Audio WA273. With judicious mic selection and placement, drums are larger-than-life; DI bass and keyboards sound massive and synths become trance-inducing; electric guitars soar; vocals rule. Pianos and acoustic guitars are resplendent. Orchestral instruments — strings, woodwinds, brass, and percussion — achieve ineffable lushness and dimension. You can even use the WA273 as a tone-shaping tool to run stems or complete mixes through. Hear what the WA273 can do for your own recordings. It's transformative.UK Custom Carnhill transformers1073-loving engineers perk up when the conversation turns to the component history of these classic circuits, and signal transformers are a frequent topic of discussion. Vintage 1073s used different transformer variants throughout their production run; but the most coveted were the very first ones made by Marinair Radar, due to their fluid and forgiving nature that saturates sweetly when pushed. They have been known to bring engineers to tears when they hear how gorgeous their mixes sound through them! Warm Audio turned to Carnhill Transformers of Cambridgeshire, UK, to design meticulous replicas of these most desirable early 1073 transformers. The results are stunning, and — to our ears — tantalizingly close to early vintage 1073sWarm left no stone unturnedA vital yet not-often-discussed component of these classic British circuits is the different types of capacitors and output transistors used. To maintain the integrity of the original circuits, Warm decided to use high-quality tantalum and polystyrene capacitors in the signal path and an output transistor choice that delivers smoother results at higher gain settings than what is commonly found in today's 1073-style preamps. All considered, Warm Audio's monumental effort to design a no-compromise product has paid off handsomely. You'll appreciate this every time you plug into the WA273 and hit record.Warm Audio WA273 2-channel Mic/Line/Instrument Preamp Features:Handwired, hand-assembled 1073-style preamplifiersFully discrete, Class A, transformer-balanced circuitryUK-made Carnhill Transformers80dB of gain handles any type of microphone, including low-output ribbonsResistor-stepped rotary gain switches for easy recallTone buttons change input transformer impedance for mic optimization and tonal shapingPolarity switches48V phantom power4-position inductor-based highpass filters, selectable for Off, 50, 80, 160, or 300HzXLR mic inputsLine-level TRS inputsTS Send/Receive insert jacksXLR and TRS line-level outputsDI instrument inputsOutput level controlsLED level indication metersRugged 19" rackmount chassisGround lift switchInternal IEC 115V/230V power inlet

994 €

Warm Audio WA-273 EQ

If there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop/rock records for the last 50+ years, it would most definitely be the venerable 1073.  The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp(eq’s) today.  The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with & w/out EQ), that each pay careful and humble homage to the original circuit.After years of R&D, careful reverse-engineering, and countless hours of auditioning, the WA73 Family has been born! The WA73 Family shines on all types of microphones and sources including; vocals, acoustic/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through.  With 80dB of gain, a fully discrete Carnhill Transformer balanced signal path, and versatile 3 band inductor EQ (on WA73-EQ and WA273-EQ products) - there’s no recording, mixing or engineering task the WA73, WA73-EQ, WA273, and WA273-EQ can’t handle.A LOOK INSIDEHand Wired, Hand AssembledThe classic 1073 was hand-wired and so is the WA73 Family!  Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build.  The entirety of the WA73 Family of preamp(eq’s) is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.UK Custom Carnhill Transformers1073 enthusiasts unequivocally get excited about the component history in these classic circuits.  The signal transformers are a common topic of conversation.  The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar.  Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature.  They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them!  Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers.  The entire WA73 Family proudly utilizes these fantastic Carnhill Transformers.  We at Warm Audio have not yet heard a modern day 1073-style preamp(eq) sound as close to the early vintage 1073 design as do our WA73 Family units with these beautiful custom Transformers.Capacitors & Signal Path:An important part of these classic British circuits not often discussed is the different styles of capacitors and output transistor used.  We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.UK Blore Edwards Switch-Pots (WA73-EQ & WA273-EQ only):A great sounding 1073-style circuit should be just as reliable as it is great sounding.  The complex dual concentric switch potentiometers in the EQ sections of the WA73-EQ and WA273-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers.  The use of Blore-Edwards components is no small inclusion for 1073-style preamp-eq’s in this price range            SPECIFICATIONS

1.354 €

Warm Audio WA-2MPX

The WA-MPX is an authentic reproduction of the vintage tape machine tube preamp that started the birth of rock ‘n’ roll known for pure analog warmth, delivering an impressive 300v of raw power & 90dB of tube gain. During the golden era of tape recording, the original 351-style tube preamp became the kings of studio tech and signature sound in the signal chain of hit recordings for artists including Elvis Presley, Bing Crosby, Les Paul, Nat King Cole, and Roy Orbison and producers like Steve Albini- a timeless sound that continues to be pursued by elite audio engineers today. With premium components, true-to-original circuit design, and selectable tape saturation, the WA-MPX authentically reproduces all the analog tone of the original to bring vintage warmth & color to your sound.

1.320 €

Warm Audio WA-412

The WA-412 provides 4 channels of classic American console preamps in a sleek 1RU design. This style of preamp is often referred to as "the sound of Rock n' Roll" for its BIG punchy low end and smooth open top end. The price/performance ratio of the WA-412 is almost unfathomable to the experienced studio engineer who has possibly paid much more for preamps of this style during their career. Featuring fully discrete socketed 6-pin opamps and custom wound Altran USA input and output transformers, the WA-412 leaves nothing to be desired. If you are looking for multiple channels of world class tone in an affordable package, the WA-412 is the right choice for you.Inspiration behind the WA-412.When I first started holding regular studio sessions years ago I always desired to have more channels of high-end mic pre's. I could only afford to have one or two in my studio at a time, which was never enough to record a full band or drummer. I knew very well that if signals were not recorded well "on the way in" they wouldn't be salvageable later, but my budget constrained me.  Because of this so many of the sources were recorded through poor-quality mic preamps.  If the WA-412 was available back then I likely wouldn't have had to settle for poor, low-quality tone. The WA-412 was designed "for the people" (if you will) and we believe it will become a serious work-horse in many professional and home studios. - Bryce Young (founder)More features.The WA-412 has all of the features one would expect from this style of preamp... and more. Output Trim is available on every channel for precise control and creative gain structuring. A Tone switch (transformer input impedance) is also available on each channel, which allows you to choose between a warm and punchy classic console tone, or go for a more open & neutral sound.Better components.Each channel utilizes a fully discrete socketed 6-pin opamp that can be swapped with other opamps. Discrete opamp circuitry is known for its high headroom and low distortion characteristics and has much to do with the coveted sound of these classic console preamps.  All input and output transformers that are made in the USA by high-end transformer manufacturer, Altran. We worked closely with Altran to create unique transformers that extend the low frequency response of these classic preamps. The transformers also use a vintage winding technique that produces a very distinct smooth BIG character. Carefully choosing the WA-412 components has resulted in an amazing four channel ‘workhorse’ preamp/DI that performs at the highest levels, while still adding vintage console magic to your signal.Specificaions:4 Channel Microphone Preamplifier + Instrument DIFully discrete, transformer coupled, through-hole component topologyAltran USA custom wound, premium input and output transformersX520 discrete op-amp in every channel, socketed for convenience. Can be user-replaced with most 6 pin, discrete op-amps for varying flavor & tone65db of gainInputs - Microphone XLR & Active Instrument 2Meg ohm HI-ZOutputs - Transformer balanced XLR & TRSTONE button input impedance - Switches from 600 ohms to 150 ohms (affects the tone of both the mic and HI-Z inputs)-20db pad - pads both mic and instrument DI inputsSelf noise:

1.217 €

Grace Design M201 mk2

High Fidelity Microphone Preamplifier Like the updated m801mk2, our freshly redesigned m201mk2 provides a full serving of our unique brand of audio performance. It delivers massive headroom, ultra-wide bandwidth and a very open, musical character. The fully balanced signal path has been refined, resulting in incredible dynamic range. A new power supply design provides the lowest noise performance we have ever achieved. This all means the new m201mk2 will translate a sonic picture of astonishing clarity and detail, which captures the essential character of the music being recorded. Changes over the previous design find the m201mk2 more essential and a bit more paired down. We have eliminated the A/D option as this is functionality is now best served buy our current m108 8 channel mic preamp A/D. We have eliminated the M+S matrix and a few other functions to really focused on making the finest, purist style 2 channel mic preamp we can. These refinements also serve to bring the price down to where even more recording engineers can now afford Grace Design flagship mic preamp performance. The m201mk2 will bring out the very best in your entire microphone collection. Your favorite large diaphragm mics will sound like they were intended, with detail and texture in extra measure. Your humble dynamics mics will come alive with newfound dynamics and clarity. Ribbons mics will perform their best with our exclusive ribbon mic mode, which shifts the gain range up 10dB while deactivating 48V phantom power, bypassing the decoupling capacitors and optimizing the input impedance. FREQUENCY RESPONSE: @ 20dB gain ± 3dB 150Ω source: 3.2Hz-530kHz @ 20dB gain ± 0.2dB 150Ω source: 14.8Hz-109kHz @ 40dB gain ± 3dB 150Ω source: 3.2Hz-500kHz @ 40dB gain ± 0.2dB 150Ω source: 15.4Hz-103kHz THD+N: @ 20dB gain +20dBu out, 1kHz:

2.450 €

Grace Design m101

Ιn 2000, the model 101 helped fuel a revolution. When people took professional recording into their own hands, it was there with all of the quality and performance of a high-end mic preamplifier, but with a price that made it available to the masses. 8 years later, and the cause moves forward with the newly redesigned m101.With its impressive list of new features, the m101 is ready to give any mic preamplifier a run for its money. Consider the new audio signal path with 0.5% precision metal film resistors, 12 position gold plated rotary gain switch, a built-in universal AC input module, or our exclusive RIBBON mic mode - and the picture becomes clear: This is now a fully professional, state of the art precision mic preamp that roundly outperforms anything in its class. All this at the same affordable price of the original model 101.  From podcast to concert hall, the m101 brings the build quality, refinement and performance to revolutionize any recording facility Fast and musical transimpedance architectureUpdated audio path with 0.5% precision metal film resistors New 12 position gold plated rotary gain switchHigh performance output line driver amplifier and HPF amplifierNew Ribbon mic mode (also great for dynamic mics)-  Relay bypass of phantom power decoupling capacitors, increased input impedance, and 48V lockoutWider 10-75dB gain range Enhanced RFI interference suppression Three output connectors: XLR balanced, TRS balanced and Ό” unbalancedBombproof laser-etched black anodized frontpanelSealed gold contact relay for Hi-Z input switching Built in power supply / no wall-wart! Led indicators for +48V, Ribbon mode, and HPFFive year warranty on parts and labor Made in the USA

1.099 €

Manley Core

Manley designed the Core reference channel strip so that you can hit record and focus on your performance, not your signal chain. It sports the quality, performance, and flexibility their VOXBOX is known for, at a price that makes it accessible to any serious artist or engineer. You get a world-class Manley mic pre, followed by a 3:1 ELOP style compressor for effortless dynamic control. Engineers at Athens Mastering are ecstatic over the active Baxandall EQ, and a fast attack FET brickwall limiter at the end of the chain protects your converters from accidental clipping. Even if you plug right in without tweaking a single knob, you're sure to get an amazing sound.Manley Core Reference Channel Strip Features:Easy to use and awesome-sounding channel strip based on the award-winning VOXBOXClass A tube mic preamplifier with Manley's hand-wound transformersDirect input uses the same circuit as the Manley SLAM! for fantastic direct-instrument recordingsELOP compressor with 3:1 ratio tames any signal transparentlyBaxandall EQ with low/high shelving and sweepable mid for flexible sonic sculptingFast attack FET brickwall limiter ensures you don't clip your converters during recordingFlexible metering can display input, output, and compressor gain reduction levels 

2.545 €