Turntables

Manual HiFi-Belt-Drive Turntable 

Hi-Fi Turntable with USB. Easy Setup and Operation Takes minutes to unbox and quickly operate for novice and seasoned vinyl fans. Plug the DP-450USB into your favorite amplifier or system and immediately begin reconnecting with your vinyl collection - it’s that easy. Speed Selector  Supports playback at 33 1/3 rpm, 45 rpm and 78 rpm. Easily play your entire vinyl collection and enjoy its full breadth - even your cherished, vintage 78’s. Create Digital Files of Vinyl Records  Integrated USB-A output allows for one-touch recording of your favorite vinyl records onto a USB drive as MP3 or WAV format files. Play your albums on the DP-450USB or record and take them with you to enjoy trusted Denon sound wherever  you go.  

Έφτασε η ώρα να ενεργοποιήσετε εκ νέου την κυκλική ακρόαση των δικών σας δίσκων βινυλίου. Το DP-29F διαθέτει ενσωματωμένη διόρθωση RIAA, για να μπορείτε να το συνδέσετε στο σύστημά σας, μέσω κανονικής αναλογικής σύνδεσης. Το DP-29F είναι κατασκευασμένο με ακρίβεια από άκαμπτο χυτοπρεσαριστό αλουμίνιο για παραγωγή ομοιόμορφης αδρανειακής μάζας για εξαιρετικά σταθερή περιστροφή του πλατό, βασικού παράγοντα ήχου υψηλής πιστότητας κατά την αναπαραγωγή. Το πλατό διαθέτει αυτοματοποιημένο σύστημα που ξεκινά την αναπαραγωγή του δίσκου με το απλό πάτημα ενός πλήκτρου και τελειώνει την αναπαραγωγή στο τέλος του δίσκου, γυρίζοντας τον βραχίονα στην αρχική του θέση και σταματώντας την περιστροφή του πλατό. Το σύστημα αυτό διασφαλίζει ότι δεν θα γρατσουνίσετε ακούσια τους δίσκους σας κατά την αναπαραγωγή τους. Υπάρχει, επίσης, μηχανισμός χειροκίνητης ανύψωσης, που σας επιτρέπει να τοποθετήσετε τη βελόνα στο δίσκο οποτεδήποτε θελήσετε, κι έτσι μπορείτε να παρακάμψετε ένα τραγούδι ενδιάμεσα σε μία πλευρά του δίσκου. Το DP-29F διαθέτει ενσωματωμένο ισοσταθμιστή πικάπ για σύνδεση της συσκευής σε ολοκληρωμένο ενισχυτή που δεν έχει δική του προενίσχυση πικάπ. Το πλατό αυτό κινείται από ένα DC servo μοτέρ και ένα σύστημα με ιμάντα σε ταχύτητα 33 1/3 ή 45 rpm (στροφών ανά λεπτό). Διατίθεται με κεφαλή MM, κι έτσι μπορείτε να ξεκινήσετε να απολαμβάνετε την προσωπική σας συλλογή αναλογικών δίσκων μόλις συνδέσετε το DP-29F στο οικιακό σας hi-fi σύστημα. Εγγύηση δύο-ετών για Καινούριο και ενός-έτους για Ανακατασκευασμένο μοντέλο.

Return Of Thorens Dna With Additional Features Thorens TD 1601 combines everything TD 1600 brings with some additional features regarding comfort and connection to amplifiers. Classical wooden plinth, two-part platter with inner belt and thick rubber mat, powerful motor control unit, arm board and acrylic dust cover are expanded by balanced outputs and functions for easier handling. The conical springs for sub chassis are not mounted on top board any longer but standing on the bottom. Additionally, a small but strong tightened thread made of steel connects sub chassis with a steel pin on the bottom and so prevents sub chassis from staggering and allows only vertical movement. An electrical lift is included, too and a contactless auto shut off. XLR jacks provide a real balanced connection to amplifiers.

Return Of Thorens Dna With Additional Features Thorens TD 1601 combines everything TD 1600 brings with some additional features regarding comfort and connection to amplifiers. Classical wooden plinth, two-part platter with inner belt and thick rubber mat, powerful motor control unit, arm board and acrylic dust cover are expanded by balanced outputs and functions for easier handling. The conical springs for sub chassis are not mounted on top board any longer but standing on the bottom. Additionally, a small but strong tightened thread made of steel connects sub chassis with a steel pin on the bottom and so prevents sub chassis from staggering and allows only vertical movement. An electrical lift is included, too and a contactless auto shut off. XLR jacks provide a real balanced connection to amplifiers.

Return Of Thorens Dna Thorens TD 1600 combines the brand’s tradition of the past with 21st century’s technology. Externally quite similar to former famous 160 series with classical wooden plinth, two-part platter with inner belt and thick rubber mat, arm board and acrylic dust cover, it contains a lot of innovations inside. The conical springs for sub chassis are not mounted on top board any longer but standing on the bottom. Additionally, a small but strong tightened thread made of steel connects sub chassis with a steel pin on the bottom and so prevents sub chassis from staggering and allows only vertical movement. A powerful control unit takes care of motor speed.

Return Of Thorens Dna Thorens TD 1600 combines the brand’s tradition of the past with 21st century’s technology. Externally quite similar to former famous 160 series with classical wooden plinth, two-part platter with inner belt and thick rubber mat, arm board and acrylic dust cover, it contains a lot of innovations inside. The conical springs for sub chassis are not mounted on top board any longer but standing on the bottom. Additionally, a small but strong tightened thread made of steel connects sub chassis with a steel pin on the bottom and so prevents sub chassis from staggering and allows only vertical movement. A powerful control unit takes care of motor speed.

The Thorens TD 402 DD comes as out of the box solution for easy use. It has got a very silent, innovative direct drive motor in combination with an integrated phono pre amp and auto start and auto stop function. Far from simple entry level standard Thorens TD 402 DD uses state of the art technology together with ease of use and perfect sound. The new tonearm Thorens TP 72 uses a carbon tube, the pre installed cartridge AT VM95 E is mounted in a detachable headshell. The integrated phono preamp can be switched off if necessary. An acrylic dust cover and a power supply are included. Thorens TD 402 DD comes as best buy in its price range.

The Thorens TD 402 DD comes as out of the box solution for easy use. It has got a very silent, innovative direct drive motor in combination with an integrated phono pre amp and auto start and auto stop function. Far from simple entry level standard Thorens TD 402 DD uses state of the art technology together with ease of use and perfect sound. The new tonearm Thorens TP 72 uses a carbon tube, the pre installed cartridge AT VM95 E is mounted in a detachable headshell. The integrated phono preamp can be switched off if necessary. An acrylic dust cover and a power supply are included. Thorens TD 402 DD comes as best buy in its price range.

With the new TD 124 DD, Thorens is reviving one of the most legendary turntables in the brand’s history. The original concept of the TD 124 has been massively improved upon, using modern approaches, and now offers an unparalleled playback quality. Thorens TD 124 DD – Tradition Meets Innovation  The original TD 124 was introduced in 1957 and has been used for decades in countless broadcast studios around the world. Ambitious music lovers also quickly discovered the highly precise turntable for themselves; a dedicated fan base has remained loyal to the TD 124 to this day. Thorens is now building on this tradition with the completely newly developed TD 124 DD and continues it with innovative technologies. The purist design and basic construction are based on the original, but the height-adjustable aluminium chassis now rests on vibration-damping rubber elements. Instead of the original drive with friction wheel and belt, the new TD 124 DD uses a "High Precision" Direct Drive. This provides powerful torque, allows precise speed control, and keeps unwanted vibrations from the drive away from the platter. Thorens TD 124 DD – Build ForThr Best Sound Also new is the tonearm TP 124. It can be precisely adjusted in all parameters to the cartridge of choice and features an innovative anti-skating solution with a ruby bearing and a patented electric tonearm lift to facilitate gentle placement and removal of the stylus. In addition to the extensive adjustment options, the enclosed headshell provides a great deal of flexibility when it comes to selecting a cartridge. The TD 124 DD also comes with an additional, slightly heavier counterweight that matches the Thorens SPU TD 124 pickup, which is available separately. This is an updated version of another legendary piece of vinyl equipment, the famous Ortofon SPU. Thorens has created the SPU 124 together witclose h Ortofon for the discerning vinyl enthusiast looking for the extraordinary. Thorens has payed attention to every detail when developing the new TD 124 DD to ensure that it meets the highest aspirations in sound performance. A high-quality external power supply unit ensures interference-free power delivery. In addition to the unbalanced outputs, balanced XLR connectors are also provided, which guarantee optimal signal transmission and thus the best possible sound when connecting the TD 124 DD to a high-end system with an appropriately equipped phono preamplifier.

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.  The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.  The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

THORENS is again expanding its range and is now presenting another fully automatic turntable for all vinyl fans with the all new TD 102 A model. The TD 102 A opens a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanism of the TD 102 A guarantees the lowest possible frictional resistance of all mechanical components. The unit comes with an also newly developed carbon tonearm, including the preassembled AT VM 95 E cartridge system from Audio Technica, the successor model to the AT 95 E, which has been known and favored by vinyl-friends for many years. The switchable integrated phono preamplifier guarantees full connectivity with all modern audio systems. The TD 102 A is available in surfaces "black high-gloss" or "walnut high-gloss", with care being taken during the development phase to emphasize the typical THORENS design. A high sound quality and a long service life complete the typical properties as you have been used to from THORENS for many years.

THORENS is again expanding its range and is now presenting another fully automatic turntable for all vinyl fans with the all new TD 102 A model. The TD 102 A opens a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanism of the TD 102 A guarantees the lowest possible frictional resistance of all mechanical components. The unit comes with an also newly developed carbon tonearm, including the preassembled AT VM 95 E cartridge system from Audio Technica, the successor model to the AT 95 E, which has been known and favored by vinyl-friends for many years. The switchable integrated phono preamplifier guarantees full connectivity with all modern audio systems. The TD 102 A is available in surfaces "black high-gloss" or "walnut high-gloss", with care being taken during the development phase to emphasize the typical THORENS design. A high sound quality and a long service life complete the typical properties as you have been used to from THORENS for many years.

Quality Affordable Turntable with Twin Gimbal Tonearm, Built-in Preamp, and Ortofon CartridgeFor the true vinyl enthusiast, the Dual CS 518 turntable is equipped with a sophisticated twin gimbal tonearm design using pivot ball-bearings for optimal precision. This superior tonearm has the ability to guide even high-end cartridges through your record grooves with the greatest degree of precision and reliability.Included with the CS 518 is an Ortofon 2M Red MM phono cartridge and a switchable MM-phono preamplifier, making this 'table ready-to-run after easy set-up. A hinged dust cover completes the package."Priced to Be Heard"England's What Hi-fi? magazine gave the CS 518 its top rating of Five Stars, for reasons of "dynamic and expressive sound, good level of insight, easy to set up and use… It’s well priced and sonically talented enough to be a viable alternative to the best at the price.""Priced to be heard," proclaims Michael Fremer's analogplanet.com review for November 22, 2021. "The 'star' of the show here is the twin-gimbal ball-bearing tonearm, which though I have no way of measuring, has a precise 'feel' and sounded so, as well negotiating tough to track records especially on vocal sibilants. The servo-controlled adjustable 3 speed D.C. motor is also a stand-out feature.""Easily Worth the Asking Price""The CS 518 is not inexpensive, but the workmanship and the sound it produces make it easily worth the asking price," notes Thom Moon, soundstageaccess.com, November 1, 2021. "It’s easy to set up, it offers fine sound quality, it’s well constructed, and it looks good doing its part. If you’re in the market for a turntable in this price range… give the Dual CS 518 a very close look. I’m betting you won’t regret it.""Another pleasant chapter is added to the glorious history of Dual turntables with this device," writes Michael Lang, stereo-magazine.com, October 7, 2021.Twin Gimbal Tonearm and Precision PlatterThe CS 518 boasts a straight, statically balanced tonearm with an advanced twin gimbal design. Four precision pivot ball-bearings provide smooth and accurate tracking. The adjustable tonearm features provide the option to change the phono cartridge in the future should you wish to upgrade and to alter the tracking force and anti-skating accordingly.The precise aluminum die-cast platter uses a heavy rubber mat for resonance damping along with a solid platter bearing with a hardened steel spindle in a brass bushing.Selectable Electronic Speed ControlA turntable as easy to use as the CS 518 would never insist that you wrestle with belts to change speeds. Operation couldn't be simpler. The precise optical speed control lets you select 33 rpm, 45 rpm, or even 78 rpm with the twist of a knob.MM Phono Preamplifier Built-inThere is no obligation to use an outboard phono preamplifier with CS 518. This turntable comes with a built-in phono preamplifier. It can be either connected to the phono input or the line input at the amplifier. The built-in phono stage can switched on or off via a switch in the back. If you choose to, you can bypass the phono stage and use one of your own, or one built-into your amp or receiver of choice instead.Factory Installed Ortofon 2M Red CartridgeAn Ortofon 2M Red moving magnet phono cartridge is pre-mounted and precision-aligned. The 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. It features a new, improved engine that provides an increased output of 5.5mV, an optimized sound reproduction, and a high level of sonic accuracy.

Η έμφαση στην υψηλή ακρίβεια εξαρτημάτων είναι ένα χαρακτηριστικό όλων των προϊόντων Dual. Αυτό ισχύει και για το entry model CS 418, το οποίο χρησιμοποιεί την ίδια πλατφόρμα με τα υψηλότερα μοντέλα στη γκάμα προϊόντων. Η κεφαλή Ortofon 2M Red και ένας εναλλάξιμος MM-phono preamplifier αποτελούν αναπόσπαστο μέρος αυτού του πακέτου.

Naim Audio has proudly designed and handcrafted music systems in the historic English city of Salisbury for almost 50 years. Just outside the city lies the World Heritage site of Stonehenge, its Neolithic standing stones perfectly framing the movements of the sun. We didn’t need to look far for naming inspiration for this very Special Edition, nor did we need to deviate from our own heritage: although Solstice is our first turntable, we have been venerating vinyl since the genesis of Naim in the late 1960s. If you love the organic authenticity of vinyl, you can now finally enjoy it with the musical purity and passion only a Naim system can deliver - welcome to a new dawn for music.

Made in France, the Chroma 200 RIAA is a satin black turntable with an integrated RIAA phono preamp. It is equipped with an Ortofon OM10 cartridge, an aluminum arm with an arm lifter for smooth handling. The speed selection (33/45/78 rpm) is done automatically. It also benefits from a new digital drive motor, allowing perfect rotational speed while being quieter. IMPROVED AESTHETICS Made in France, the Chroma turntables succeed the prior Alpha and Omega models with major technological advancements and new aesthetic features. This model now features a lift arm, new tray material, graduation on the counterweight alongside a free mechanical scale. NEW ENGINE The new engine and modified engine suspension represent over four years of research and development to ensure the optimum technical performance and sound quality. As well as this, the Chroma has an additional rotary table axis system for smoother listening.   Technical Specifications: Frame: PVC Plate: Stamped steel Arm: Aluminum Cell: Ortofon OM10 45 Tr adapter: Polyamide Integrated electronics: High-end RIAA preamp Colors: Matte black Dimensions (mm): L450 x H120 x P380 Weight: 5 kg RIAA module Bandwidth: 25 Hz-20 kHz (-3 dB / + 1 dB) Gain: 40.5 dB (MM), 61 dB (MC) Crosstalk: 88 dB (MM), 78 dB (MC) Distortion: 0.006% (MM), 0.05% (MC) Signal to noise ratio: 82 dB (MM), 76 dB (MC)

Διαθέτει προενισχυτή για να συνδεθεί εύκολα σε όλους τους ενισχυτές και ραδιοενισχυτές Home Cinema. Δεν θα προβληματιστήτε αν το πικάπ είναι μακρυά από τον ενισχυτή σας, την ηχομπάρα σας και το σύστημα που διαθέτουν δέκτη Bluetooth ,θα συνδεθεί ασύρματα. Μπορείτε να απολαύσετε τους παλιούς και νέους δίσκους σας και να ψηφιοποιήσετε αν το θέλετε μέσω της ενσωματωμένης θύρας USB (στο πίσω μέρος της συσκευής) τα βινύλια σας. 

Πλήρως αυτόματο πικάπ με σύστημα λειτουργίας ψηφιοποίησης μέσω ενσωματωμένης θύρας USB. Διαθέτει προενισχυτή για να συνδεθεί εύκολα σε όλους τους ενισχυτές και ραδιοενισχυτές Home Cinema. Με αυτό, μπορείτε να απολαύσετε τους παλιούς και νέους δίσκους σας και να ψηφιοποιήσετε αν το θέλετε μέσω της ενσωματωμένης θύρας USB (στο πίσω μέρος της συσκευής) τα βινύλια σας. Πλατό χυτού αλουμινίου, κεφαλή AT 3600L κινητού μαγνήτη, 2 ταχύτητες: 33 rpm και 45 rpm. DC servo-controlled motor, Αυτόματη επιστροφή του βραχίονα pick-up.

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl Plug and Play design, set-up in less than thirty seconds.  Hand assembled RB110 tonearm.   High quality, low vibration motor.  Phenolic resin, flywheel effect platter.   Factory fitted Carbon moving magnet cartridge. Performance Pack aftermarket upgrade available (optional).  We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience? The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. Performance beyond price Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016. If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further. TonearmBrand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance. CartridgeRega Carbon cartridge supplied fitted as standard. 24v synchronous motorThe first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability. PlinthBrand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white. Central Bearing housingRe-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending) PlatterBrand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability. Re-Designed feetNew improved feet to increase stability and reduce vibration transfer. Motor cover trayNew motor cover tray with integrated cooling. Balance WeightNew 111g ‘Plug and Play’ balance weight

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl Plug and Play design, set-up in less than thirty seconds.  Hand assembled RB110 tonearm.   High quality, low vibration motor.  Phenolic resin, flywheel effect platter.   Factory fitted Carbon moving magnet cartridge. Performance Pack aftermarket upgrade available (optional).  We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience? The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. Performance beyond price Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016. If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further. TonearmBrand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance. CartridgeRega Carbon cartridge supplied fitted as standard. 24v synchronous motorThe first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability. PlinthBrand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white. Central Bearing housingRe-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending) PlatterBrand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability. Re-Designed feetNew improved feet to increase stability and reduce vibration transfer. Motor cover trayNew motor cover tray with integrated cooling. Balance WeightNew 111g ‘Plug and Play’ balance weight

Elipson Chroma Carbon turntable joins the latest range of turntables by Elipson. Exclusive to the Carbon models is a carbon covered chassis and Ortofon 2M Red cartridge. SUPERB VINYL REPRODUCTION The Chroma series is the product of 4 years of research and development into finding the best components for superb vinyl reproduction. This series is a step up to the Omega and Alpha 100 turntables and now features a new engine, engine suspension, rotary table axis system and revamped. CARBON COVERING The Carbon turntable is constructed using PMMA acrylic for the chassis and then covered in a carbon coating which is subtle yet makes a statement. It also features the addition of a lift arm, which is a key feature on the Chroma models, and the Carbon turntable features the fantastic Ortofon 2M red cartridge.

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Direct DriveHiFi Turntable System With TURN5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class. Powerful DC motor &low-resonance die-cast platter The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction. High-quality control elements & connections The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups. On the rear panel of the TURN5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed. Static balanced S-tone arm & Hi-tech Ortofoncartridge system The TURN5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium. The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality. Elegant design in a particularly heavy-duty construction The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing. With its deep black piano finish, visually the TURN5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record. DIRECT DRIVE HIFI TURNTABLE SYSTEM Powerful direct-drive DC motor for a stable rotation Heavy, low-resonance die-cast platter VTA-adjustable Tonearm with a Ortofon 2M red cartridge Features: Quartz-Controlled HiFi turntable with high torque Brushless Direct Drive DC Motor Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping Static-balanced S shaped tonearm with VTA adjustment Adjustable anti-skating dial for improved cartridge tracking Pre-installed Ortofon 2M Red cartridge Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM) Universal Headshell Connector provides added flexibility High Quality Phono outputs (with separate grounding connection) Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable) Sunk-in terminal cavity for protected connection Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling Supplied counterweight supports a wide variety of cartridges Elegant design with deep black Piano Finish and a fully gold anodised Platter Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

Το ποιό θρυλικό πικάπ της Rega, πολυβραβευμένου πέντε φορές από το ειδικό περιοδικό What Hi-Fi και προϊόν της χρονιάς (RP3) δεν επρόκειτο ποτέ να είναι ένας εύκολος στόχος για τους ανταγωνιστές μας. Χρειάστηκε μια ομάδα σχεδιαστές με επικεφαλής τον Roy Gandy και δύο χρόνια για να αναπτύξει το ολοκαίνουριο «Rega 3» με νέο σχεδιασμό. Η ομάδα μας έχει εργαστεί ακούραστα για να βελτιώσει κάθε πτυχή αυτού του πικάπ που προσφέρει βελτιωμένη εργονομία, χρηστικότητα και πρώτα απ 'όλα, ηχητικό performance. Το νέο  σας προσφέρει νέο επίπεδο στην ακρόαση.Είναι πραγματικά μια νέα προσέγγιση για πικάπ του 2017Το πικάπ έρχεται χωρίς κεφαλή, επικοινωνήστε μαζί μας για να σας προτείνουμε κεφαλές που ταιριάζουν Χαρακτηριστικά:Πικάπ χειροποίητης κατασκευήςΤεχνολογία Πλατό – Υποπλατό με σύστημα Double Brace για μηδενικούς συντονισμούςΣύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβουPulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφώνΕιδικό πηγάδι μηδενικών ανοχών (new patent) Φ 11mmΧειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpmΠλατό βελτιωμένης ακριβείας τύπου float glass ‘Optiwhite’ πάχους 12mmΧειροποίητος βραχίονας RB330 μηδενικών τριβών (new patent)Προστατευτικό καπάκι από διάφανο plexiglassΝέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωσηΕργονομικός διακόπτης On/Off κάτω από το πικάπΔιαθέσιμα φινιρίσματα: Black Gloss, White GlossΔιαστάσεις (W x H x D): 450.0 mm x 117.0 mm x 360.0 mmΒάρος: 7 kg 

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new DEBUT CARBON ESPRIT (DC) was designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance. This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  Features:Lifestyle for vinyl fans  8,6” carbon tonearm  Heavy non resonant acrylic platter  New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stabilityPrecision belt drive with synchronous motor  New TPE motor suspension  Magnetic cartridge 2M red from Ortofon  Specifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred 

Cut the cord, keep the vinyl. The AT-LP60XBT gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetooth® wireless connectivity. So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables. The turntable pairs with speakers, headphones or other wireless devices. With its CSR BT chipset, the turntable is even able to connect to devices that support the aptX codec, which offers much-improved sound quality over the standard SBC codec. Of course, the AT-LP60XBT can also be operated just like a regular turntable with a traditional wired connection. Either way – wired or wireless – you get outstanding audio with the ease of automatic operation controlled by front-panel start, stop and tonearm lift buttons. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup. The AT-LP60XBT plays both 33-1/3 and 45 RPM records and comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover. The turntable is available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD). * The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners. Features : High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable Compatible with aptX codec Fully automatic operation with two speeds: 33-1/3 and 45 RPM Anti-resonance, die-cast aluminum platter Redesigned tonearm base and headshell for improved tracking and reduced resonance Integral Dual Moving Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L) AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Built-in switchable phono pre-amplifier for phono- or line-level output Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover Available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD) Specifications : Type Belt drive turntable, fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminum Wow and Flutter Less than 0.25% (WTD) @ 3 kHz Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized Power Supply Requirements 100 to 240V, 50/60 Hz,0.6 A Max. Power Consumption 1.5 W Dimensions 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D Weight 2.6 kg (5.73 lbs.) Accessories Included Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) AC adapter: 12 V, 2 A Replacement Stylus: ATN3600L Communication System: Bluetooth Version 5.0 Maximum Communication Range: Line of sight - approx. 10 m (33') Compatible Bluetooth Profile: A2DP Support Codec: SBC, Qualcomm aptX

AT-LP60XUSBFully Automatic Belt-Drive Turntable (Analog & USB) Experience high-fidelity audio of vinyl & convert records to digital files Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM Built-in switchable phono pre-amplifier for phono- or line-level output Improved tracking and reduced resonance for smoother sound Integral Dual Magnet™ phono cartridge with replaceable diamond stylus Free download of the Mac & PC compatible Audacity recording software AudioTechnicaAT-LP120X-USBBlack Specifications: Drive Method Belt-drive Type fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminium Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 1 W Dimensions 359.5 mm x 97.5 mm x 373.3 mm Weight 2.6 kg Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable Cartridge & Stylus Replacement Stylus ATN3600L

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

The Planar 6 has one goal, to reproduce your vinyl as accurately as possible. We have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance.The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now. See 'product details' tab below for full information. The Planar 6 will be available with the recommended *Ania MC factory fitted as an attractive package. The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim. The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard. The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable. Key Features: NEO power supply. Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim. Upgrade white drive belt fitted as standard. Custom dual layer smoked / clear float glass platter. Single piece aluminium sub platter. Custom machined high precision drive pulley. Patent pending, ultra-low friction central brass hub. Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy. RB330 handmade precision tonearm with custom stainless weight. New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control. New smoked dust cover. New aluminium foot trims and Planar style feet. Dimensions Turntable Width 448mm Depth 365mm Height 120mm (Dustcover closed) Weight 5.2kg Dimensions Neo PSU Width 180mm Depth 155m Height 50mm Weight 0.6Kg

Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'Three' model ever seen.Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience.  Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before. Features:Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers.Rega made, new low capacitance phono cable with Neutrik plugs,Improved lower friction, precision horizontal and vertical bearingsNew design 100g mild steel balance weight.Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss whiteDouble braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.Bearing housing – Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.Platter - New float glass ‘Optiwhite’ polished rim 12mm – Improved accuracy in manufacture and stunning looks.Re-designed foot - New improved foot to increase stability and reduce vibration transfer.24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).​​

With its strong, sophisticated design and re-engineered tonearm with auto lift and playback stop, the Denon DP-400 plays cherished albums faithful to the original recording. Rediscover your passion for vinyl with the Denon DP-400 Hi-Fi turntable with with auto speed sensor for precise sound reproduction. Strong construction and elegant design blends seamlessly into the existing Denon Design Series. The S-Shape curved tonearm lifts automatically and stops the platter when vinyl reaches the end of playback. Weighted, belt-driven platter supports 33 1/3 rpm, 45 rpm or 78 rpm records with precision that’s faithful to the original recording. Integrated phono equalizer creates an open, enveloping sound stage for your cherished albums with detailed, accurate reproduction. Includes MM cartridge. Exclusive, removable dust cover doubles as a display stand. Unique S-Shape curved tonearm design optimizing tracking angle at any point of the record to reduce harmonic distortion for clear audio reproduction Tonearm supports auto lift-up and playback stop when end of record is reached Built-in phono equalizer with on/off toggle lets you connect DP-400 to any amplifier or system with analog inputs or phono inputs Multi-speed selector (33-1/3 rpm, 45 rpm, 78 rpm) to play the widest array of vinyl records Engineered with a more than 100-year Denon legacy in audio excellence — trust this high-quality and durable turntable to deliver the ultimate audio experience Includes high quality MM cartridge for precise sound out-of-the-box within minutes Exclusive, removable dust cover with included base eliminates fixed-cover vibrations and doubles as a display stand for your vinyl record covers Supports both MM (included) and MC cartridges — advanced flexibility that matches your audio preferences Weighted, belt-driven platter with auto speed sensor maintains accurate speed for precise sound reproduction Strong, weighted base and durable construction reduces external vibrations and improves audio performance Part of the Denon Design Series — elegant, modern design fits beautifully in the home SPECIALLY ENGINEERED S-SHAPE TONEARM Features a carefully engineered S-Shape curved tonearm with optimized tracking angle at any point of the record, auto-lift at records end and playback stop. When the vinyl reaches the end of playback, the tonearm auto-lifts preserving the excellent condition of your album and the cartridge. S-Shape curved tonearm design also reduces harmonic distortion, ensuring a crystal clear sonic signal every time you listen. Easy Setup and Operation Takes minutes to unbox and quickly operate for novice and seasoned vinyl fans. Plug DP-400 into your favourite amplifier or system, including the Denon Design Series, and immediately begin reconnecting with your vinyl collection — it’s that easy. Exclusive, Removable Dual-purpose Dust Cover Removable dust cover features a modern design, elevating the overall aesthetic of DP-400 while eliminating vibration issues that affect music quality associated with attached covers. Doubling as a display stand for your album cover, place the dust cover upright on the included base and show it proudly to friends and family. Phono Equalizer Built-in phono equalizer creates an open, enveloping sound stage that enlivens your cherished vinyl collection while staying true to the original recording as the artist intended. Connect it directly to a mini component or integrated amp for seamless use. Cartridge Options Includes an MM cartridge for more precise listening and added musical detail. As a producer of the longest-selling cartridge in market, enjoy the Denon DP-400 turntable with confidence. If you prefer listening via an MC cartridge, easily swap out the existing MM cartridge to fit your audio preferences. Enjoy iconic Denon sound quality however you choose to listen. Weighted, Belt-driven Platter with Auto Sensor Integrated auto sensor accurately controls the platter, preventing unwanted speed fluctuations during playback — enjoy audio reproduction exactly as the artist intended. Compact Size At just 41 cm in width, DP-400 is constructed to fit seamlessly into your existing Hi-Fi system. Though compact in size, it still delivers the powerful, detailed sound you expect from Denon. Sophisticated Design Series Aesthetic Blending seamlessly with the popular Denon Design Series, DP-400 features a sophisticated form factor and solid construction. Durable aluminum materials offer a modern aesthetic. Pair it with the rest of the Denon Design Series to complete your elegantly designed Hi-Fi system. 100+ Years of Firsts in Audio Technology Founded in 1910, Denon has a deep heritage of "firsts" in audio technology — from Japan's first audio electronics manufacturer, to producing the world's first commercial CDs. This focused investment in audio R&D ensures you get the latest technology and highest quality with every listening experience.

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new DEBUT CARBON ESPRIT (DC) was designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance. This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  Features:Lifestyle for vinyl fans  8,6” carbon tonearm  Heavy non resonant acrylic platter  New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stabilityPrecision belt drive with synchronous motor  New TPE motor suspension  Magnetic cartridge 2M red from Ortofon  Specifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred 

Semi-automatic turntable with electronical stop-function. Succeed from the „big brother“, the CS 550, it has the same massive wooden chassis (but in black colour only), motor unit and bearing. Approved configuration also on the tonearm – it ist he arm of the CS 505-4.Tonearm technology:Cardan bearing with massless stylus force set by a high-precision torsion spring. Rigid headshell made of carbon fiber with ½-inch fixing-holes. Adjustable tracking force and anti-skating. Viscosity damped tonearm lift.Chassis technology:Vibration damping solid wood chassis. Vibration damped aluminium platter with anti-static, thick felt mat.Drive technology:Belt driven by a precision flat belt. DC motor with electronic speed control. Special hardened 7mm axle. Cartridge Ortofon OM 10 is included.Specifications:Speed r/min.: 33/45Speed accuracy: 0,06%Rumple unweightet signal-to-noise ratio: 48dBRumple weighted signal-to-noise: 72dBCartridge system: Orotofon OM 10Frequency Response: 22 Hz - 22 kHzConnectors: 1 x RCA Stereo Socket, 1 x Ground SocketDimensions (BxHxT): 440x112x370 mmWeight: 6,7kgColour: BlackPower supply: 12 V DCCartridge Ortofon OM 10 is included.