Moving Coil Cartridges

Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.Each one uses a pair of parallel wound coils, which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance, putting you in touch with your vinyl collection like never before.Hand built moving magnet cartridge with three point mounting system and Vital profile diamond stylus with zero tolerance channel balance.Specifications:Output: 6.8 - 7.2mVStylus: Vital. Complex fine line micro-ground from a rectangular diamond billet.Fixing: Rega three point fixingCoils: High Spec parallel wound coilsColour: YellowTracking Pressure 1.75g

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Specifications:Output voltage at 1 kHz 5 cm/sec : 0,45 mVChannel balance : < 1,5 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at -3 dB : 20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz : +3/-1Tracking ability at 315 Hz at recommended tracking force : 80 μmCompliance, dynamic, lateral : 12 μm/mNStylus type : Nude Fine Line on Alu cantileverStylus tip radius : r/R 8/40Tracking force range : 2,2-2,7 g (22-27 mN)Tracking force recommended : 2,5 g (25 mN)Tracking angle : 20ºInternal impedance, DC resistance : 5 OhmRecommended load impedance : 50-500 OhmCartridge body material : Stainless steel AluminiumCartridge colour : Red/Black Cartridge weight : 10,7 g

The Quintet Black S is the best example of Quintet’s overall excellence.The Quintet Black S is graced with a Nude Shibata diamond, considered one of the best stylus profiles available, mounted on a high-performance Sapphire cantilever. The Shibata’s slim, highly polished profile allows an exceedingly wide contact area to the walls of the groove and ensures detailed and pure reproduction throughout the spectrum, including even the most high frequency groove information.The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Specifications:Output voltage at 1 kHz 5 cm/sec : 0.3 mVFrequency range at -3 dB : 20-25.000 HzFrequency response 20 Hz - 20 kHz : +/-2.0 dBTracking ability at 315 Hz at recommended tracking force : 70 μmCompliance, dynamic, lateral : 15 μm/mNStylus type : Nude EllipticalStylus tip radius : r/R 8/18 μmTracking force range : 2.1-2.5 g (21-25 mN)Tracking force recommended : 2.3 g (23 mN) Quintet SideMono01Tracking angle : 20ºInternal impedance, DC resistance : 5 OhmRecommended load impedance : >20 OhmCartridge body material : ABS/AluminiumCoil wire material : Pure 4-nines silverCartridge colour : WhiteCartridge weight : 9 g

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Specifications:Output voltage at 1 kHz 5 cm/sec : 0,5 mVChannel balance : < 1,2 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at -3 dB : 20 Hz - 50 kHzFrequency response 20 Hz - 20kHz : +2/-1Tracking ability at 315 Hz at recommended tracking force : 80 μmCompliance, dynamic, lateral : 12 μm/mNStylus type : Nude FG 70 on Ruby cantileverStylus tip radius : r/R 6/70Tracking force range : 2,2-2,7 g (22-27 mN)Tracking force recommended : 2,5 g (25 mN)Tracking angle : 20ºInternal impedance,DC resistance : 5 OhmRecommended load impedance : 50-200 OhmCartridge body material : Stainless steel Aluminium

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Specifications:Output voltage at 1000 Hz, 5cm/sec. : 0.3 mVChannel balance at 1 kHz : < 1.2 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at - 3dB : 20-25.000 HzFrequency response 20-20.000 Hz : +/-1.5 dBTracking ability at 315Hz at recommended tracking force : 80 µmCompliance, dynamic, lateral : 15 µm/mNStylus type : Nude Fine LineStylus tip radius : r/R 8/40 µm Quintet SideBronze02Tracking force range : 2.1-2.5 g (21-25 mN)Tracking force, recommended : 2.3 g (23 mN)Tracking angle : 20°Internal impedance, DC resistance : 5 OhmRecommended load impedance : > 20 OhmCartridge body material : ABS/AluminiumCoil wire material : Pure 4-nines copper 

The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.Elliptical stylus chip and durable duralumin tapered pipe cantilever.10Ω mid impedance specifications.Dramatically increased magnetism with neodymium magnets and PCOCC as the coil.High separation, wide-response dual moving coil.  VC Mold eliminates unnecessary vibrations."Hanenite" anti-vibration rubber eliminates unwanted vibrations.​Specifications:Type: MC-typeFrequency Response: 15-50,000HzChannel Separation: 30dB (1kHz)Tracking Force: 1.8-2.2g (2.0g standard)Coil Impedance: 10Ω (1kHz)DC Resistance: 10ΩVertical Tracking Angle: 23°Recommended Load Impedance: More than 100Ω (when head amp connected)Coil Inductance: 22μH (1kHz)Static Compliance: 40×10-6cm/dyneDynamic Compliance: 10×10-6cm/dyne (100Hz)Output Voltage: 0.5dB (1kHz)Stylus Shape: Oval (0.3×0.7mil)Cantilever: Duralumin tapered pipeDimensions: H16×W16.6×D26.5mmWeight: 6.9g​

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1000 Hz, 5cm/sec.400 μVChannel balance at 1 kHz< 1 dBChannel separation at 1 kHz> 24 dBChannel separation at 15 kHz> 20 dBFrequency range at - 3dB20 - 55 kHzFrequency response 20 Hz - 20 kHz+1,5Tracking ability at 315Hz at recommended tracking force *)80 µmCompliance, dynamic, lateral12 µm/mNStylus typeNude Ortofon replicant,, conical aluminiumStylus tip radiusr/R 5/100 µmTracking force range2,2-2,7 g (22-27 mN)Tracking force, recommended2,5 g (25 mN)Tracking angle23°Internal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel / AluminiumCartridge colourBronze/BlackCartridge weight10,7 gram 

Κινητού πηνίου(MC).Προδιαγραφές: Output voltage at 1 kHz 5 cm/sec450 μVChannel balance< 1,5 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-3Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude fine line, Al. cantileverStylus tip radiusr/R 8/40Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-500 OhmCartridge body materialStainless steel AluminiumCartridge colourRed/BlackCartridge weight10,7 g 

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1 kHz 5 cm/sec500 μVChannel balance< 1,2 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-2Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude FG 70, Ruby cantileverStylus tip radiusr/R 6/70Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel AluminiumCartridge colourBlue/BlackCartridge weight10,7 g 

The Ortofon Exclusives Series of highest performing Moving Coil cartridges has now been expanded to include a new premier model – the MC Verismo. The Ortofon Exclusives series cartridges are widely acknowledged as being some of the best Moving Coil cartridges on the market, and we are continuously working on expanding the Exclusives range to offer music lovers even more opportunities to experience the supreme quality, precision, impact and dynamics that a highend reference cartridge conveys.The MC Verismo has been developed based on our extensive knowledge of vibration properties, different shapes and materials characteristics, as well as competences in magnetism, mechanical design and technologies. This new state-of-the-art product, representative of numerous Ortofon design ideals, is truly exemplary of the highest degree of performance possible in contemporary analogue playback technology. The MC Verismo will undoubtedly provide sound which simply has to be experienced.Design elements and high-end materialsThe housing of the Verismo cartridge is made in Titanium with the Selective Laser Melting (SLM) technique pioneered by Ortofon. This technique allows for precise control of the density of the body material, allowing for extremely high internal damping.The MC Verismo makes use of Ortofon’s Replicant 100 diamond. This Line Contact type stylus distinguishes itself by having a narrow and long contact surface, which is as close as possible to the original cutting stylus. This ensures the most accurate reproduction, lowest distortion and extended frequency range.The addition of a solid Diamond cantilever provides the best possible interface between the stylus and armature, owing to its hardness and crystal structure. The improvements found in the use of a Diamond cantilever have redefined the boundaries of analogue reproduction, presenting greater inner detail, subtlety, and depth like never before.Performance with a range of compatibilityIn the MC Verismo the cartridge’s contact with the tonearm takes place through three well-defined contact points placed on the top side of the cartridge. This means that the mechanical integration of the cartridge and the tonearm arm is always absolutely perfect and will result in a significant and breathtaking increase in dynamics, resolution, and richness in detail.With optimized weight and moderate compliance to suit the majority of modern tonearms, the MC Verismo is easily compatible with an endless array of contemporary high-end turntable equipment.