ATC SCM50ASL Pro (Pair)

ATC SCM45A Pro (Pair)

The ATC SCM45A Pro are mid-size active 3-way monitors in a horizontal cabinet. They are designed for critical near-field monitoring in any control room, LCR monitoring in medium rooms and surround channels in medium to large rooms.Twin 6.5″ woofersBass comes from two hand-built 164 mm short-coil woofers with carbon-paper cones. Response extends to 42 Hz (-6 dB) with up to 112 dB continuous SPL, from a cabinet that fits on the console.75 mm midrange dome and «S-Spec» tweeterThe ATC 75 mm soft-dome midrange sits at the centre of the cabinet with the 25 mm dual-suspension «S-Spec» tweeter. The symmetrical layout gives consistent ±80° horizontal dispersion and a clear centre image.MOSFET class A/B tri-ampThe built-in amplifier delivers 150 W to the bass, 60 W to the mid and 25 W to the high section. 4th-order filters at 380 Hz and 3.5 kHz include phase compensation. Rear-panel controls adjust input sensitivity (0 to -6 dB) and bass boost (0 to +3 dB at 40 Hz).

13.100 €

ATC SCM100ASL Pro (Pair)

The ATC SCM100ASL Pro are 3-way active monitors for medium to large control rooms, mixing and mastering studios. They combine a 12″ Super Linear woofer, ATC’s 75 mm soft-dome midrange and a built-in 350 W three-channel amplifier, for high SPL, full bass and the clean, neutral performance of the larger ATCs.

20.300 €

ATC SCM110ASL Pro (Pair)

The ATC SCM110ASL Pro are 3-way active monitors with twin 9″ Super Linear woofers, ATC’s 75 mm soft-dome midrange and a built-in 350 W amplifier. They keep the well-known balance of the SCM50ASL Pro with more and deeper bass, which is why mixing and mastering studios around the world choose them.

21.900 €

ATC SCM150ASL Pro (Pair)

The ATC SCM150ASL Pro are active 3-way monitors with a 15″ woofer for high-output monitoring in larger control rooms, as mid-field or main monitors. They combine bass down to 25 Hz with the clarity of the ATC midrange dome.15″ Super Linear wooferThe 375 mm woofer, built to full ATC SL specification, reaches 25 Hz (-6 dB) with 117 dB maximum continuous SPL and low distortion even at high levels.«Super Dome» midrange and «S-Spec» tweeterThe 75 mm soft-dome midrange covers 380 Hz to 3.5 kHz and the 25 mm dual-suspension tweeter extends to 25 kHz, with ±80° horizontal dispersion.350 W tri-ampThe built-in amplifier delivers 200 W to the bass, 100 W to the mid and 50 W to the high section. LF EQ adds up to +6 dB at 40 Hz and input sensitivity is adjustable from 0 to -6 dB, with overload protection and a front-panel warning. 6-year warranty.

23.700 €

Barefoot MiniMain12 (Pair)

Barefoot Sound is proud to introduce the revolutionary new MiniMain12, possibly the most accurate, revealing and technologically advanced recording monitor ever made. This is a bold statement, but the MiniMain12 is an incredibly bold speaker. With vanishing low distortion, breathtakingly wide dynamic range, ultra-fast transient response plus our amazing MEME™(Multi Emphasis Monitor Emulation™) technology. The MiniMain12 is a 4-way active system with 7 drive units housed in sealed enclosures spanning 20Hz to 40kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response.Every driver has an under-hung voice coil moving inside an advanced geometry motor that enables it make extremely long linear excursions. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The aluminum cone subwoofers, woofers and midranges radiate as perfect pistons to at least 2.5 octaves beyond their respective bandwidths.Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage of the MM12. Melding the system together is a groundbreaking DSP crossover that has taken Thomas Barefoot more than 4 years to develop. With beautifully designed high end converts and cutting edge proprietary filtering techniques the MiniMain12 produces such a seamless and coherent wavefront that, if you dare, you can actually listen to this speaker from less than 3 feet away with no sonic compromise. And yes, the MM12 works perfectly out to far field distances as well, producing SPLs equivalent to big mains. If all this weren’t enough, the MiniMain12 brings yet another revolutionary feature into the mix – MEME™(Multi Emphasis Monitor Emulation™) technology. While no other monitor in the world can match the MM12’s linearity and transparency, the MM12 actually has the capability to emulate other speakers! Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space. So why not make the MM12 sound and translate like those speakers as well?With the turn of a knob one can switch from the MiniMain12’s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MiniMain12 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even some of their distortion components. If you know how to work on these speaker you will feel very comfortable working on the MM12’s emulation settings. Specifications:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 20Hz – 50kHz (±3dB),28Hz – 40kHz (±1dB)Bass Response: -3 dB @ 20Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 90 liters total internal volume, Sealed sub enclosure, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout.Crossover Frequencies: 80 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 250W HypexMidranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 250W HypexWoofers: 2 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursionAmplifier: 1200W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 50W, Maximum: 1500WWeight: Speaker: 120 lbs each (54 kg) – no handlesShipping: 135 lbs each (61 kg) – no handlesDimensions HxWxD: 26.0 x 14.4 x 21.9 inches (660 x 366 x 556 mm)​​

23.274 ,39 €

Barefoot MicroMain26 (Pair)

The MicroMain26 is a 4-way active system with 6 drive units housed in sealed enclosures spanning 30Hz to 45kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The 2.5” aluminum cone midrange is housed in a cutting edge 3D printed waveguide enclosure.The 5.25″ woofers feature a phalanx of advanced technology, yielding upper bass and lower midrange detail that rivals any driver on the planet. Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage used in every Barefoot monitor. Melding the system together is a groundbreaking new DSP crossover that took Thomas Barefoot more than 4 years to develop. With beautifully designed high end converters and cutting edge proprietary filtering techniques the MM26 sound stage is seamlessly coherent and deeply revealing.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM26 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain26′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MM26 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM26′s emulation settings.Χαρακτηριστικά:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 30Hz – 45kHz (±3dB)40Hz – 40kHz (±1dB)Bass Response: -3 dB @ 30Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 32 liters total internal volume, Sealed subwoofer, woofer and mid enclosures, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughoutCrossover Frequencies: 100 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges: 2.5″ aluminum cone, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexWoofers: 2 x 5.25″ poly/paper cone, Advanced geometry neodymium motor, +/- 5 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 10″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 500W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 30W, Maximum: 650WWeight: Weight: Speaker: 71 lbs each (32 kg)Shipping: 83 lbs each (38 kg)Dimensions HxWxD: Dimensions HxWxD: Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm)Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm) 

14.574 ,07 €

PMC 6-2

The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

12.240 €

Adam S5H

The S5H is a powerful main monitor custom-designed for the demanding rigours of reference listening in the world’s most expansive studios and control rooms. The three-way S5H was conceived, as its name suggests, to be used in a horizontal orientation and features two 10-inch Extended Linear Excursion (ELE) bass drivers, newly designed by ADAM Audio expressly for the S Series. Like the LF ELE units on all the other members of the range, the S5H’s woofers feature ADAM Audio’s proprietary Symmetrical Magnet Assembly (SMA) guaranteeing that low-frequency audio remains tightly controlled and free of distortion at all times. The all-important mid-range frequencies are handled by ADAM Audio’s new hybrid DCH. This innovative 4-inch MF driver was also newly developed by ADAM Audio exclusively for the S Series and combines the sonic advantages of cone and dome drivers in a single, one-piece unit. Together with the S-ART treble driver — the latest iteration of ADAM Audio’s widely respected folded-ribbon tweeter, now produced to tighter tolerances than ever before — the resulting combination produces a powerful but unfatiguing sound, with a palpable sense of depth: the last word in high-resolution, natural-sounding audio reproduction. The off-axis responses of the treble and mid drivers remain extremely accurate thanks to the addition of high- and mid-frequency waveguides milled from solid aluminum: ADAM Audio’s newly developed Mid-range and High-frequency Propagation Systems (MPS and HPS). The resultant stable, wide-ranging dispersion ensures that teams of more than one person can work in the loudspeakers’ sweet spot simultaneously, as is often necessary in larger control rooms. The S Series’ custom-designed DSP optimizes the loudspeaker crossovers to create linear responses for the entire range, as well as providing user equalization and in-room tuning/voicing functions. The DSP also handles the limiter-based high-frequency driver protection, processes the signals from the AES3 digital inputs, and will in time facilitate various expansion options. Software updates can be carried out with ease via the associated USB port, which also allows users to connect computers and control the speakers’ DSP functions via a software front-end. No fewer than three separate amplifiers power the drivers: a 700 W Class D design for the bass drivers, a 300 W Class D for the mid range and a 100 W Class D unit for the S-ART tweeter. With its innovative features, advanced design, generous headroom and enormous dynamic range, the S5H takes its rightful place as ADAM Audio’s flagship reference monitor: an extraordinary loudspeaker offering audio reproduction to the very highest standards of fidelity.

11.113 €