Deals of the Month

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox dj to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox dvs in combination with our control vinyl to scratch and mix with digital files stored on your computer. Features: CLEAR LAYOUT & MAGVEL FADERS:The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements. SMOOTH MIXING: Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left. FLAGSHIP FILTER FX: Each channel comes with its own dedicated Sound Color FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension. BUILT IN USB SOUND CARD: Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive. REKORDBOX DJ BUNDLED: You get a free rekordbox dj licence key bundled with this mixer. Simply activate your licence key for our DJ software, connect to your computer via USB, and start DJing. REKORDBOX DVS BUNDLED: You also get a free licence key for rekordbox dvs included in the box for low-latency scratching with CDJs and XDJs. Or play and scratch with tracks from your rekordbox library using analogue turntables and the Control Vinyl (sold separately). Specifications: Included DJ Software: rekordbox dj,rekordbox dvs DVS Control: rekordbox dvs Frequency Range: 20 - 20000 Hz Sampling Rate: 48 kHz A/D Converter: 24 bit D/A Converter: 24 bit S/N Ratio Line: 94 dB Distortion: < 0.005 % (LINE) Power Supply: AC adaptor (DC 12 V) Width: 230 mm Height: 108 mm Depth: 320 mm Channels EQ/ISO:3 band EQ/ISO Range: -∞ ~ +6 dB Performance Control Channels: 2 Sound Color FX: Filter Terminals Inputs: 3 LINE (RCA),2 PHONO (RCA),1 MIC (1/4 inch TS Jack) USB: 1 USB B port Outputs: 1 MASTER (XLR),1 MASTER (RCA),2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack) What's in the box DJM-250MK2 Power cord AC adaptor USB cable Operating Instructions (Quick Start Guide) Warranty License key card (rekordbox dj, rekordbox dvs)

The M2si integrated amplifier takes our peerless premium-amp experience and applies it to a more affordable price point. It boasts trickle-down technology from our mighty and legendary Titan flagship, plus other high-end touches such as solid metal controls. The M2si delivers 76 watts per channel into 8 ohms and 137 watts into 4 ohms. This means the M2si will drive a wide range of speakers, even power-hungry models. Further flexibility is provided by the M2si's excellent connectivity, which includes six line-level inputs and switchable home-theatre throughput. It features a Class A preamp stage with its own, independant power supply, coupled with a discrete pair of power amps. In effect, this means the M2si offers the performance benefits of a pre/power configuration with the compact convenience of a one-box design. Its performance is rock-solid, it's sonically well-rounded and it's comfortable with a wide array of speakers. And it's all served up in an elegant, no-nonsense package. Specifications: Output Power 72 Watts per channel into 8 Ohms (18dBW) Voltage 22 Volts RMS, 20Hz to 20 kHz; onset of clipping 62 Volts peak to peak Current 25 Amps peak to peak Damping factor 36 Output devices 1 pair per channel Line input THD+N < 0.014 % typical, 20Hz to 20 kHz Signal / noise ratio > 96dB ‘A’-weighted Input impedance 40 k Ohms Frequency response +0, –0.1dB, 10Hz to 20 kHz Connections Line level inputs 6 pairs line level RCA connectors Line level outputs 1 pair line level RCA connectors, constant level TAPE outputs 1 pair line level RCA connectors, preamp outputs for e.g. bi-amping Speaker outputs 2 pairs 4mm banana plug/binding posts Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption 320 Watts maximum Weight Unit only, unboxed 9.2 kg (20¼ lbs) In shipping carton 13 kg (30⅔ lbs) Dimensions Wide 440 mm (17⅓”) High, including feet 100 mm (4”) Deep (front to back) including terminals 400 mm (15¾”)

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The M2si integrated amplifier takes our peerless premium-amp experience and applies it to a more affordable price point. It boasts trickle-down technology from our mighty and legendary Titan flagship, plus other high-end touches such as solid metal controls. The M2si delivers 76 watts per channel into 8 ohms and 137 watts into 4 ohms. This means the M2si will drive a wide range of speakers, even power-hungry models.Further flexibility is provided by the M2si's excellent connectivity, which includes six line-level inputs and switchable home-theatre throughput. It features a Class A preamp stage with its own, independant power supply, coupled with a discrete pair of power amps. In effect, this means the M2si offers the performance benefits of a pre/power configuration with the compact convenience of a one-box design.Its performance is rock-solid, it's sonically well-rounded and it's comfortable with a wide array of speakers. And it's all served up in an elegant, no-nonsense package.Specifications:OutputPower 72 Watts per channel into 8 Ohms (18dBW)Voltage 22 Volts RMS, 20Hz to 20 kHz; onset of clipping62 Volts peak to peakCurrent 25 Amps peak to peakDamping factor 36Output devices 1 pair per channelLine inputTHD+N < 0.014 % typical, 20Hz to 20 kHzSignal / noise ratio > 96dB ‘A’-weightedInput impedance 40 k OhmsFrequency response +0, –0.1dB, 10Hz to 20 kHzConnectionsLine level inputs 6 pairs line level RCA connectorsLine level outputs 1 pair line level RCA connectors, constant level TAPE outputs1 pair line level RCA connectors, preamp outputs for e.g. bi-ampingSpeaker outputs 2 pairs 4mm banana plug/binding postsPower requirementMains voltages 115/230VAC 50/60Hz (factory pre-set)100VAC 50/60Hz (alternative)Consumption 320 Watts maximumWeightUnit only, unboxed 9.2 kg (20¼ lbs)In shipping carton 13 kg (30⅔ lbs)DimensionsWide 440 mm (17⅓”)High, including feet 100 mm (4”)Deep (front to back) including terminals 400 mm (15¾”)

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

We’ve listened to feedback from DJs and improved on our previous professional DJ headphones. With newly developed drivers, the HDJ-X7 model gives you clean monitoring even at high volumes. The independent ground wire in the 4-core twisted-structure cable ensures superior left and right channel separation, while the flexible headband means your headphones will be a perfect fit.The HDJ-X model headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.Thanks to the newly developed 50-mm driver, sound is always crystal clear. Add to that the tight bass notes from the optimised diaphragm, a cable with superior left and right channel separation and the bass reflex chamber, all enabling professional monitoring.Even on the road, your headphones will handle severe conditions and heavy use. Durable metal is used in the moving parts, enabling a strong construction that cleared even the US Military Standard Shock test*.These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.  Specifications: Weight (without cable)   312 gMaximum Input Power   3500 mWOutput Sound Level   102 dBFrequency Range   5 - 30000 HzImpedance   36 Ω

The Elipson Prestige Facet 8B speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor.The Prestige Facet 8B is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. Medium-sized, it is equipped with a 17 cm low midrange driver featuring a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion.A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The experts weren't wrong when they awarded the Elipson Prestige Facet 8B speaker with the Choc Classica and Diapason d'Or awards. A champion in its category!The Prestige Facet 8B's high sensitivity allows it to be paired with any amplifier with a power rating of 85 W or less per channel. Its lively performance make it an excellent surround sound speaker for a home cinema installation.   Specifications:Speaker: BookshelfNumber of way: 2Power: 85 W RMSTweeter: 1 "Mid-bass driver: 6,5 "Frequency Response (±3 dB): 47 Hz - 25 kHzSensitivity: 91 dB/1W/1mImpedance: 6 OhmsDimensions (W x H x D): 230 x 361 x 347 mmWeight with packaging, pair (W x H x D): 525 x 460 x 405 mmWeight with packaging, pair: 20,3 kg

Meet MASCHINE MIKRO, your flexible, compact companion for making music with a laptop. Use it to tap out beats, play melodies, and build up tracks – fast, fun, and hands-on. Want to start creating right away? We’ve thrown in everything you need including instruments, sounds, effects, and powerful tools like sampling and drum synths.MIKRO gives you four different ways of getting hands-on with your music using the 16 pads. Drum beats in Pad mode, with color coding for kicks, snares, and other sounds. Switch to Keyboard mode to play melodies with the pads. In Chord mode, it’s easy to lay down inspiring chord progressions. And in Step mode, program beats and patterns visually in a classic step-sequencer style on the 16 pads – get exciting musical results quickly Specifications :Compact, music production instrument that integrates powerful software with tactile, responsive hardwareFour ways to input sound using the 16 pads – drum in pad mode, play melodies in Keyboard mode, create chord progressions in Chord mode, and program in a classic step-sequencer style from Step modeUse the software on its own or as a VST, Audio Unit, or AAX plug-in in all major DAWs (including Ableton Live, Pro Tools, Logic Pro, and FL Studio)1.6 GB MASCHINE Factory Selection with samples, one-shots, loops, sample instruments, presets, patterns, drum kits, and songsSame software as MASCHINE MK3 / STUDIO / JAM – includes 25 pro-quality studio and creative FX including filter, EQ, delay, reverb, and compressor16 large, velocity-sensitive pads for easy two-handed drummingDual-touch Smart Strip lets you slide your fingers to strum instruments, bend sounds, use Perform FX, and morePush encoder and screen for browsing, navigating, adjusting volume levels and panning, and controlling parametersPowered via USB 2.0Classic groovebox features including 16 pad velocity levels, swing, pad link, note repeat, step sequencer, and vintage MPC60/SP1200 sampling emulationPowerful mixer, arranger, and sampler for full creative control over your tracksA doorway into the Native Instruments sound universe – easily expand your library with KOMPLETE, Sounds.com, Expansions, and enjoy perfect integration with any third party NKS-certified instruments and effects System Requirements : macOS 10.12 or 10.13 (latest update), Intel Core i5, 4 GB RAM Windows 10 (latest update, 64-bit), Intel Core i5 or equivalent CPU, 4 GB RAMAdditional Requirements:USB 2.0 Port, 3 GB free disk space for MASCHINE Essentials (full MASCHINE software plus 1.6 GB MASCHINE Factory Selection), 1 GB free disk space for MASSIVE, MONARK and REAKTOR PRISMAn Internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate MASCHINE software. Once installed and activated, all products can be used offline. Additional Info : Supported Interfaces: Stand-alone, VST2 (64-bit), Audio Units (64-bit), AAX 64, ASIO, CoreAudio, and WASAPI.MASCHINE requires activation: Activate using the serial number on the flyer inside the box.In case of graphics issues, please install the latest drivers for your GPU. This can be necessary even if Windows reports them as up to date.MASCHINE Essentials (full Maschine application plus 1.6 GB Factory Selection) provided as a download upon hardware registration Full versions of three popular KOMPLETE plugins, available for download from Native Access after hardware registration:MASSIVE - heavyweight virtual analog synthesizerMONARK – iconic mono synthREAKTOR PRISM – flexible polyphonic synthesizer Dimensions and Weight :Width: 320 mm / 12.6", Length: 177 mm / 6.96", Height: 45 mm / 1.77", Weight: 1.12 kg / 2.47 lbs

The wireless Wi-Q embodies three decades of leadership in bass technology. No other subwoofer in this price range gives you so much for so little.The Wi-Q is affordable, powerful, feature-rich and can be quickly and easily integrated into any entertainment system without the use of messy cables. A simple push of “EQ” on the remote and the exclusive, built-in processor produces optimal bass in your room from any source.Features:Wireless via Velodyne’s WiConnect System0.5 W Stand-By ComplianceCommon amplifier platformMaximum output and impactSuperior digital performanceExtended excursion driversEfficient green digital amplifiersDigital distortion limiting systemFour one-touch listening presetsOne-touch Auto-EQ room bass correctionInstantaneous front-panel feedbackFront-firing driver with down-firing ported cabinetFlexible low-pass crossoverRemote control Specifications:Amplifier: 450 watts Dynamic/225 watts RMS PowerAuto On/Off :YesCabinet Design: Extended Excursion Down-firing portColor: Black Ash VinylDimensions: (H/W/D) 18.44" x 16.375" x 18" (includes feet and grille) (46.8 x 41.6 x 45. cm)Frequency Response: (+/-3 dB) Overall 14.6 - 240 Hz (+/-3 dB) 25 - 120 HzHiPass Crossover: 80 Hz, 6 dB/octaveLoPass Crossover: 40 - 135 Hz adjustable (12 dB octave, 24 dB ultimate)Phase Control: 0, 90, 180, 270 DegreesRemovable Grille: YesShipping Weight: 47 lb (21.3 kg)Voice Coil: 2" 2-Layer copper​​

The new MASCHINE takes our classic groovebox workflow and makes it faster and more intuitive. Optimized based on customer research, it’s packed with new features to boost your speed and increase your focus – all without breaking the workflow you love.Big, bold, and in your face, the larger pads create more room for complex moves like flams and rolls. New technological updates make the pads more sensitive to lighter touches, for more expressive playing. And since the center-to-center distance is exactly the same, your muscle memory and workflow don’t have to change.With two full-color displays and the four-directional push encoder, you can browse sounds, FXs, plug-ins, and instruments with a tactile, one-handed, completely visual workflow – simply find the thumbnail and load directly from the hardware. Plus, the high-res screens let you get more precise with your mixing, see an overview of your arrangement, or zoom in on waveforms to slice samples like a surgeon.MASCHINE now comes with a studio-grade, 96kHz / 24-bit audio interface for pristine sound. Simply patch in a synth or add a dynamic mic for quick recording and sampling. Stereo line and MIDI ports make it a perfect centerpiece for any studio. Plus, it’s USB-powered, so you can record anywhere with your laptop – or plug in the included power supply unit for brighter pads.The new hardware layout cuts through the clutter to help you stay focused and get your ideas out fast. Instead of being hidden behind a shift-function button, some of the most-used features and functions can now be accessed directly with one touch.Features:Smart keyboard controller for all your virtual instrumentsPro-grade Fatar keybeds with aftertouch – 49 or 61 semi-weighted keysErgonomic pitch and mod wheels, plus touch strip for expression controlPre-mapped control of Komplete instruments and hundreds of Native KontrolStandard ( NKS) instruments from leading manufacturersFull VSTi supportTag-based preset browsing: Find sounds quickly and hear instant previewsTwo high-res color screens for browsing, tweaking, mixing, and moreLight Guide: RGB lights above each key highlight drum cells, key switches, chords,scales, and moreSmart Play: See scales and modes on t he Light Guide, play chord progressions andarpeggios with single keys, or map any scale t o white keys onlyDeep integration with Maschine software / hardwareIntuitive control over Logic Pro X, Ableton Live, and GarageBand. Cubase and Nuendointegration coming soon after initial release4-directional push encoder f or one-handed sound browsing and project navigationTwo assignable pedal inputsMIDI in / outUSB 2.0 bus poweredIncludes Komplete 11 Select

The Min 12 speakers redefine what is possible from a compact speaker and solve this problem by being ultra-small and discreet, and at the same time delivering the sound quality of much larger, traditional box speakers.For maximum placement flexibility each Minx satellite speaker can be mounted a number of different ways; they can sit on their own on any surface, or they can be mounted on adjustable floorstands, discrete table stands or pivoting wall mount brackets. So whatever your needs, there is a perfect way of integrating the Min speakers into your home.Minx is finished to the highest possible standards in stunning white or black high gloss lacquers, using paint application techniques mastered in the premium car industry. Easy to clean, hard to scratch – Minx will look as amazing as it sounds for many years to come.Unlike many style speakers which use low quality spring clips or custom cabling, Minx offers universal connection to any home cinema receiver or amplifier with an ingenious speaker terminal design, which can be removed to support banana plugs.Specifications:Sensitivity (SPL) Min 12: 86dB (2.83 Vrms input)Min 22: 88dB (2.83 Vrms input)Frequency responseMin 12: 150Hz-20kHz Min 22: 120Hz-20kHzImpedance: 8 Ohms compatibleRecommended Amp Power: 25 – 200WDimensions (H x W x D) Min 12: 78 x 78 x 85mm (3.1 x 3.1 x 3.3”)Min 22: 154 x 78 x 85mm (6.0 x 3.1 x 3.3”)Weight Min 12: 0.43kg (0.95lbs)Min 22: 0.75kg (1.65lbs)Finishes: High gloss black.

The Min 12 speakers redefine what is possible from a compact speaker and solve this problem by being ultra-small and discreet, and at the same time delivering the sound quality of much larger, traditional box speakers.For maximum placement flexibility each Minx satellite speaker can be mounted a number of different ways; they can sit on their own on any surface, or they can be mounted on adjustable floorstands, discrete table stands or pivoting wall mount brackets. So whatever your needs, there is a perfect way of integrating the Min speakers into your home.Minx is finished to the highest possible standards in stunning white or black high gloss lacquers, using paint application techniques mastered in the premium car industry. Easy to clean, hard to scratch – Minx will look as amazing as it sounds for many years to come.Unlike many style speakers which use low quality spring clips or custom cabling, Minx offers universal connection to any home cinema receiver or amplifier with an ingenious speaker terminal design, which can be removed to support banana plugs.Specifications:Sensitivity (SPL) Min 12: 86dB (2.83 Vrms input)Min 22: 88dB (2.83 Vrms input)Frequency responseMin 12: 150Hz-20kHz Min 22: 120Hz-20kHzImpedance: 8 Ohms compatibleRecommended Amp Power: 25 – 200WDimensions (H x W x D) Min 12: 78 x 78 x 85mm (3.1 x 3.1 x 3.3”)Min 22: 154 x 78 x 85mm (6.0 x 3.1 x 3.3”)Weight Min 12: 0.43kg (0.95lbs)Min 22: 0.75kg (1.65lbs)Finishes: High gloss white.

The X301 subwoofer is packed with significant technological advances. A forward firing driver for amazing punch and attack, combined with a state-of-the-art Auxiliary Bass Radiator (ABR) to deliver thunderous levels despite their compact and discrete design.The X301 is an extremely efficient and very powerful subwoofer housed in tiny cabinets, their slender size deceives the eye.Still at only 28cm (11”) square this 300W powerhouse is smaller than most typical subwoofers. But with an 8” active woofer matched to an auxiliary bass radiator it will erupt your music and movies to life with immersive punch and power.The Minx subwoofers offer complete rear panel control of ‘gain’, ‘phase’ and ‘crossover frequency’, unlike many other style subwoofers which give little or no adjustment in these areas. With these true hi-fi capabilities, regardless of your room’s shape and size Minx’s simple set-up adjustments ensure your system is perfectly customised for placement almost anywhere.Features:Powerful DSP design delivering awesome performance from the smallest footprint possiblePowerful 300W digital amplifiersOne piece aerospace grade aluminium cones move air with incredible efficiency.DSP design allows far smaller cabinet construction than comparative subwoofers.Supplied with removable grillesFull rear panel control of gain, phase and crossover frequency allowing optimum integration and roompositioningDriver plus ABR (Auxillary Bass Radiator)configuration. ABRs replace bass ports to eliminateair noise at high levelsScratch resistant high gloss lacquer available in black or white finishes.​​Specifications:Power Output: 300WFrequency Response: 31Hz (-6dB) – 200HzCrossover Active: – variable 50Hz-200HzDrivers: 1 x 8" subwoofer1 x 8" passive radiatorDimensions: 311 x 266 x 278mmWeight: 7.5Kg (16.5lbs)Finishes: High gloss white  

The X201 subwoofer is packed with significant technological advances. A forward firing driver for amazing punch and attack, combined with a state-of-the-art Auxiliary Bass Radiator (ABR) to deliver thunderous levels despite their compact and discrete design.The X201 is an extremely efficient and very powerful subwoofer housed in tiny cabinets, their slender size deceives the eye.At just 20cm (9") square, X201 is one of the world’s smallest subwoofers and is incredibly easy to accommodate. And like all Minx subwoofers, it features a range of simple controls to allow placement almost anywhere...Specifications:Power Output: 200W rmsFrequency Response: 39Hz (-6dB) – 200HzCrossover: Active – variable 50Hz-200HzDrive units: 1 x 6.5″ subwoofer, 2 x 6.5″ passive radiatorsDimensions (H x W x D): 219 x 210 x 222mm (8.6 x 8.3 x 8.7″)Weight: 5.0Kg (11.0lbs) 

The Min 22 speakers redefine what is possible from a compact speaker and solve this problem by being ultra-small and discreet, and at the same time delivering the sound quality of much larger, traditional box speakers.For maximum placement flexibility each Minx satellite speaker can be mounted a number of different ways; they can sit on their own on any surface, or they can be mounted on adjustable floorstands, discrete table stands or pivoting wall mount brackets. So whatever your needs, there is a perfect way of integrating the Min speakers into your home.Minx is finished to the highest possible standards in stunning white or black high gloss lacquers, using paint application techniques mastered in the premium car industry. Easy to clean, hard to scratch – Minx will look as amazing as it sounds for many years to come.Unlike many style speakers which use low quality spring clips or custom cabling, Minx offers universal connection to any home cinema receiver or amplifier with an ingenious speaker terminal design, which can be removed to support banana plugs.Specifications:Sensitivity (SPL) Min 12: 86dB (2.83 Vrms input)Min 22: 88dB (2.83 Vrms input)Frequency responseMin 12: 150Hz-20kHzMin 22: 120Hz-20kHzImpedance: 8 Ohms compatibleRecommended Amp Power: 25 – 200WDimensions (H x W x D) Min 12: 78 x 78 x 85mm (3.1 x 3.1 x 3.3”)Min 22: 154 x 78 x 85mm (6.0 x 3.1 x 3.3”)Weight Min 12: 0.43kg (0.95lbs)Min 22: 0.75kg (1.65lbs)Finishes: High gloss white.

The X301 subwoofer is packed with significant technological advances. A forward firing driver for amazing punch and attack, combined with a state-of-the-art Auxiliary Bass Radiator (ABR) to deliver thunderous levels despite their compact and discrete design.The X301 is an extremely efficient and very powerful subwoofer housed in tiny cabinets, their slender size deceives the eye.Still at only 28cm (11”) square this 300W powerhouse is smaller than most typical subwoofers. But with an 8” active woofer matched to an auxiliary bass radiator it will erupt your music and movies to life with immersive punch and power.The Minx subwoofers offer complete rear panel control of ‘gain’, ‘phase’ and ‘crossover frequency’, unlike many other style subwoofers which give little or no adjustment in these areas. With these true hi-fi capabilities, regardless of your room’s shape and size Minx’s simple set-up adjustments ensure your system is perfectly customised for placement almost anywhere.Features:Powerful DSP design delivering awesome performance from the smallest footprint possiblePowerful 300W digital amplifiersOne piece aerospace grade aluminium cones move air with incredible efficiency.DSP design allows far smaller cabinet construction than comparative subwoofers.Supplied with removable grillesFull rear panel control of gain, phase and crossover frequency allowing optimum integration and roompositioningDriver plus ABR (Auxillary Bass Radiator)configuration. ABRs replace bass ports to eliminateair noise at high levelsScratch resistant high gloss lacquer available in black or white finishes.​​Specifications:Power Output: 300WFrequency Response: 31Hz (-6dB) – 200HzCrossover Active: – variable 50Hz-200HzDrivers: 1 x 8" subwoofer1 x 8" passive radiatorDimensions: 311 x 266 x 278mmWeight: 7.5Kg (16.5lbs)Finishes: High gloss black  

The X201 subwoofer is packed with significant technological advances. A forward firing driver for amazing punch and attack, combined with a state-of-the-art Auxiliary Bass Radiator (ABR) to deliver thunderous levels despite their compact and discrete design.The X201 is an extremely efficient and very powerful subwoofer housed in tiny cabinets, their slender size deceives the eye.At just 20cm (9") square, X201 is one of the world’s smallest subwoofers and is incredibly easy to accommodate. And like all Minx subwoofers, it features a range of simple controls to allow placement almost anywhere...Specifications:Power Output: 200W rmsFrequency Response: 39Hz (-6dB) – 200HzCrossover: Active – variable 50Hz-200HzDrive units: 1 x 6.5″ subwoofer, 2 x 6.5″ passive radiatorsDimensions (H x W x D): 219 x 210 x 222mm (8.6 x 8.3 x 8.7″)Weight: 5.0Kg (11.0lbs) 

The Min 22 speakers redefine what is possible from a compact speaker and solve this problem by being ultra-small and discreet, and at the same time delivering the sound quality of much larger, traditional box speakers.For maximum placement flexibility each Minx satellite speaker can be mounted a number of different ways; they can sit on their own on any surface, or they can be mounted on adjustable floorstands, discrete table stands or pivoting wall mount brackets. So whatever your needs, there is a perfect way of integrating the Min speakers into your home.Minx is finished to the highest possible standards in stunning white or black high gloss lacquers, using paint application techniques mastered in the premium car industry. Easy to clean, hard to scratch – Minx will look as amazing as it sounds for many years to come.Unlike many style speakers which use low quality spring clips or custom cabling, Minx offers universal connection to any home cinema receiver or amplifier with an ingenious speaker terminal design, which can be removed to support banana plugs.Specifications:Sensitivity (SPL) Min 12: 86dB (2.83 Vrms input)Min 22: 88dB (2.83 Vrms input)Frequency responseMin 12: 150Hz-20kHzMin 22: 120Hz-20kHzImpedance: 8 Ohms compatibleRecommended Amp Power: 25 – 200WDimensions (H x W x D) Min 12: 78 x 78 x 85mm (3.1 x 3.1 x 3.3”)Min 22: 154 x 78 x 85mm (6.0 x 3.1 x 3.3”)Weight Min 12: 0.43kg (0.95lbs)Min 22: 0.75kg (1.65lbs)Finishes: High gloss black.

At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good.Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework. The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are. Features:220WPCExcellent technical performanceAmazing load driving ability, unconditional stability will drive any loudspeakerWide range of useful inputs including asynchronous USB and switchable MM / MC PhonoPreamp outputInternally it is a separate preamp with two independent monobloc power amps; effectively a separates system in a boxExcellent, hunky build qualitySpecifications:Power output: 220 Watts per channel into 8 OhmsTHD (+ noise): 107dB ‘A’ - weightedFrequency Response: +0, –0.1dB, 10Hz to 20 kHz4x Line Level RCA1x Line Level XLR Balanced1x USB type ‘B’ connector - asynchronous data stream at up to 24-bit/96kHz1 x switchable phono inputSensitivity: 3mV nominal (MM), 0.4mV nominal (MC)Signal / noise ratio: >84dB ‘A’-weightedInput impedance: 47k Ohms (MM and MC)Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHzDimensions - WxHxD (mm): 440 x 125 x 400Weight (unpacked / packed): 16.6 kg/ 21.3 kg

At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good.Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework. The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are. Features:220WPCExcellent technical performanceAmazing load driving ability, unconditional stability will drive any loudspeakerWide range of useful inputs including asynchronous USB and switchable MM / MC PhonoPreamp outputInternally it is a separate preamp with two independent monobloc power amps; effectively a separates system in a boxExcellent, hunky build qualitySpecifications:Power output: 220 Watts per channel into 8 OhmsTHD (+ noise): 107dB ‘A’ - weightedFrequency Response: +0, –0.1dB, 10Hz to 20 kHz4x Line Level RCA1x Line Level XLR Balanced1x USB type ‘B’ connector - asynchronous data stream at up to 24-bit/96kHz1 x switchable phono inputSensitivity: 3mV nominal (MM), 0.4mV nominal (MC)Signal / noise ratio: >84dB ‘A’-weightedInput impedance: 47k Ohms (MM and MC)Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHzDimensions - WxHxD (mm): 440 x 125 x 400Weight (unpacked / packed): 16.6 kg/ 21.3 kg

This new 2-channel battle mixer gives you the freedom to customize your setup and bring your own unique style to every performance. The unit enables free use of Serato DJ Pro and it’s a Hardware Unlock device for rekordbox, so you can use performance features in either application.Magvel Fader ProWe’ve enhanced the feeling of the Magvel Fader Pro and boosted the rigidity of the knob mounting shaft in the vertical direction by 30 percent so you can scratch with even more confidence.Large Performance PadsThe 8 large Performance Pads on each channel are easy to hit when you want to rapidly fire off Hot Cues and samples. And with independent pad modes, you can use 2 different features – one on each channel’s set of pads – at the same time.Large effect leversTwist sounds on the fly by adding effects with the large levers. The DJM-S7 includes all 22 built-in Beat FX from the DJM-S11 so you can get creative with these, as well as software effects in Serato DJ Pro and rekordbox. It’s easy to change the 6 effects assigned to the FX Select buttons and you can keep an eye on the name and beat value of the one you’re using by glancing at the OLED display.Bluetooth input: Wirelessly add audio from your phoneSimply pair your phone with the DJM-S7 via Bluetooth and you can drop sounds straight into your set. You can play loops to scratch over or use a music app to play a track requested by someone in the audience. Or simply have your mobile device connected and ready as a backup in case your laptop fails. You can play the sound directly through the master output or either of the channels.Loop MIDI: Automated control of DJ software functionsThis feature in the effects section of the DJM-S7 can control various functions in your DJ software by repeatedly sending a MIDI signal to the software in a set beat cycle. Functions including Hot Cue, sampler, and key shift-up are preassigned so you can start using Loop MIDI straight away.OTHER FEATURESUSB hubPlug your DJ controllers and other devices – including selected units from other brands – into the dual USB-A ports to play with them.MIDI controllerThis device is fully MIDI assignable via USB. Send control information to external devices and use the mixer as a MIDI controller.Serato DJ ProConnect your PC/Mac to use Serato DJ Pro (the mixer unlocks the software for free). Use dedicated buttons for effects and advanced Serato features including Beat Jump, Slip mode, and Quantize.Serato DVSUse Serato DVS to control and scratch with CDJs or turntables.Pitch 'n Time DJSerato DJ Pro Expansion Pack Voucher (Pitch 'n Time DJ) is included. Use Pitch Play, Key Shift, and more features. The mixer is fully MIDI mappable too.rekordboxConnect your PC/Mac to unlock performance features in rekordbox for free and use DVS mode with the dedicated control vinyl (available separately).

Creative style 6-channel professional DJ mixerCraft your soundForge a new sound with the DJM-V10; a new breed of mixer, born of fresh thinking. It’s built to allow the most creative DJs to craft original soundscapes. This 6-channel unit – loaded with unique features – produces warm audio full of energy and presence. Take full control of your mix and get ready to create something the crowd has never heard before.Elite sound qualityFeel the warmth of natural sound and hear every detail. Studio-quality 64-bit mixing and dithering processing, 32-bit high-quality A/D and D/A converters, a low-jitter clock circuit, and many other components all work to produce a full low-end, vibrant mids, and precise highs.6 channels with a wide range of inputsYou’re free to create your perfect setup with 6 channels and a host of different input types.4-BAND EQ and compressorTake full control of your mix with the newly developed 4-band EQ. A built-in compressor enables further adjustment of the loudness of your tracks.Effects for more creative expressionThe expanded send/return section enables you to add external FX, or even combine them with built-in FX. Create unique sounds; the possibilities are nearly limitless3-band master isolatorEffortlessly control the tone of your entire mix with the 3-band master isolator, featuring new boost/cut curves and adjustments to the crossover frequencies and other parameters. Grab the large dials and drive the crowd wild by drastically changing the sound.Dual headphones output and booth EQThe DJM-V10 makes back-to-back monitoring simple and comfortable. You can tweak the sound in the DJ booth just the way you like.Lockable power cableA lockable power cord is included for added reliability and to avoid accidental disconnections.*In selected regions, a non-lockable power cable is supplied instead.DJM-REC compatibleRecord and archive your mixes via iPhone or iPad, upload your sounds to cloud services or effortlessly live-stream your sessions. Find out more.rekordboxMake full use of rekordbox's low-latency DVS feature for intuitive, smooth scratching. Find out more.Serato DVS-readyUse Serato DVS to control and scratch with CDJs or turntables (Serato DJ Club Kit license required, available separately).TRAKTOR DVS-readyEnjoy DVS control via Native Instruments’ TRAKTOR PRO 3 (available separately) . Use it to intuitively control and scratch with digital audio files stored on your computer. Find out more about the Pioneer DJ Certified program.ShowKontrolThe DJM-V10 supports the extended PRO DJ LINK ShowKontrol protocol. This enables DJs, technical producers, LJs, and VJs to use all the key information from the DJM-V10, such as fader and knob positions, to align sound and visuals to create shows that blow audiences away.

Powerful Amplifier  Tangent Ampster BT II is a mini amplifier with a big sound. Just connect your personal music player to the new Tangent ampster BT II, and experience how your music can grow.  Bluetooth, Digital, and Analog Inputs Tangent Ampster BT II has got the possibility of connecting via various sources such as 4.0 bluetooth, AUX in, optical in.  Wake on Bluetooth When left idle on the bluetooth source Tangent Ampster BT II will go to standby automatically and wake automatically when you start playing bluetooth again.  Stylish Remote A stylish remote to control sources, volume etc. comes with the Tangent Ampster BT II.  Compact but Powerful Despite the compact size then dont hesitate to plug in your big bookshelf or floorstanding speaker. Tangent Ampster BT II sends out an incredible 2 x 50 Watts which is more than enough for most loud speakers.    Features: 2 x 50 watts output Bluetooth 4.0 in Digital and analog in Aux in Stylish Remote Wake on bluetooth Memory Volume

Over-ear DJ headphones (black)Prime sound qualityHear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.Outstanding soundWith a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.Rigorously testedTake the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.*MIL-STD-810GComfortable fitThese headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.Solid, refined designAll the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.