Vocal Mics

The FireBall™ dynamic instrument microphone is designed for harmonicas (both diatonic and chromatic) and beatbox. Clear, accurate and capable of handling SPLs in excess of 140 dB without distortion, the FireBall™ is ideally suited for both live stage and studio recording applications.The FireBall™ microphone has a smooth, uniform frequency response of 50 Hz - 16 kHz, and a cardioid pickup pattern for isolation and feedback control. It is lightweight, compact and comfortable to hold. The FireBall™ is manufactured with a precision machined aluminum body, steel mesh grill and unique three stage marbled anodized finish.Because the FireBall™ cardioid instrument microphone is a low impedance microphone, when using with a guitar amplifier, a quality, low-high impedance transformer (see T50k)  is required. Designed, machined, assembled and test by Audix in the USAApplications:Live Stage, studioHarmonicaVocalsBeatboxPercussionSaxophone, trumpet, tromboneFluteAccordianSpecifications:Type: DynamicPolar Pattern: CardioidFrequency Response: 50 Hz - 16 kHzImpedance: 280 ohmsSensitivity: 1.5 mV/Pa @1k 

The OM3S is a vocal dynamic microphone used for a wide variety of live, home and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.The OM3 dynamic vocal microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 18 kHz, the OM3S employs a VLMTM diaphragm for a clear, precise sound with exceptional voice response.Designed with a slight bass proximity and a tailored mid-range, the OM3S hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.Applications:Live stageSmall venues and outdoor concertsBroadscastVocals, sax, brass, guitar, dobro, flute, percussion, drumsHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 50Hz–18kHzImpedance: 250 ohmsSensitivity 1.7mV/Pa @ 1kOn/Off Switch 

Designed, machined, assembled and tested by Audix in the USA, the OM11 vocal dynamic microphone was first issued in 1985 as the OM1. This microphone is a dynamic vocal microphone used for a wide variety of live, studio and broadcast applications. Its sharp, crisp vocal sound, resistance to feedback and ability to handle high SPLs without distortion are trademarks of the OM11.The OM11 dynamic vocal microphone is designed with a tight, uniformly controlled hypercardioid polar pattern which helps isolate the vocals on stage. The response of the OM11 is tailored to cut through the mix, providing extra presence and articulation to the vocals even at very high stage volumes. In addition to having extremely low handling noise, the OM11 hypercardioid microphone is well balanced, comfortable to hold and durable.Applications:Live Stage, live recordingLead and backing vocals - all venuesBroadcastHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 50 Hz - 18 kHzImpedance: 200 ohmsSensitivity: @1k 1.9 mV/Pa 

The OM2S is a dynamic vocal microphone used for a wide variety of live, home and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.The OM2S vocal dynamic microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.Designed with a slight bass proximity and a tailored mid-range, the OM2 hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.Applications:Live stageSmall venues and outdoor concertsBroadscastVocals, sax, brass, guitar, dobro, flute, percussion, drumsHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 50Hz - 16kHzImpedance: 250 ohmsSensitivity: 1.6 mV / Pa @ 1k 

The VX10 condenser vocal microphone was designed to set new performance standards for live sound and broadcast applications. With a uniformly controlled frequency response from 40 Hz - 20 kHz, the VX10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism.The VX10 has a cardioid polar pattern which helps isolate vocals. This mic includes a 21 mm gold vapor capsule and a multi-stage internal pop filter. It is also available in a low output model (VX10LO) for greater control with loud stage volumes or extremely powerful vocalists.Aside from vocals, the VX10 cardioid condenser microphone will capture acoustic instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats and pianos.Applications:Live and studioLead and backing vocalsSpeechAcoustic instrumentsOn air announce micLive broadcastsSpecifications:Type: CondenserPolar Pattern: CardioidFrequency Response: 40 Hz - 20 kHzImpedance: 250 OhmsSensitivity: @1k = 24mv / Pa; (VX10Lo) = 4mV / Pa 

The OM3 is a vocal dynamic microphone used for a wide variety of live, home and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.The OM3 dynamic vocal microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 18 kHz, the OM3 employs a VLMTM diaphragm for a clear, precise sound with exceptional voice response.Designed with a slight bass proximity and a tailored mid-range, the OM3 hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.Applications:Live stageSmall venues and outdoor concertsBroadscastVocals, sax, brass, guitar, dobro, flute, percussion, drumsHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 50 Hz - 18 kHzImpedance: 290Sensitivity: 1.6 mV / Pa @ 1k 

The OM7 vocal dynamic microphone is used by professional sound companies, front of house and mixing engineers as well as high profile fixed installations. The OM7 provides unprecedented gain before feedback on concert level stages without sacrificing sound quality. In addition, the mic is very resistant to feedback on extremely loud stages and for performers who tend to “cup” the microphone with both hands.In order to achieve these extraordinary performance benefits, the OM7 dynamic vocal microphone is designed with an unconventionally low output level (8-10 dB lower than typical dynamic microphones). This low output level acts as a natural “pad” at the capsule in order to maintain high fidelity at the source. The OM7 hypercardioid microphone is best suited for use with high quality mixing consoles which have plenty of head room to compensate for the low gain.Applications:Lead or backing vocalsLive recordingBroadscastSax, brass, guitar, dobro, flute, percussion, drumsHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 48 Hz - 19 kHzImpedance: 50 ohmsSensitivity: 0.8 mV/Pa @1k 

The OM2 is a dynamic vocal microphone used for a wide variety of live, home and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.The OM2 vocal dynamic microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.Designed with a slight bass proximity and a tailored mid-range, the OM2 hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.Applications:Live stageSmall venues and outdoor concertsBroadscastVocals, sax, brass, guitar, dobro, flute, percussion, drumsHome studioSpecifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 50Hz - 16kHzImpedance: 290 ohmsSensitivity: 1.6 mV / Pa @ 1k 

The OM6 is a dynamic vocal microphone used for live performances, studio and broadcast applications. The OM6 touts a broad frequency response, full-bodied and articulate sound reproduction, resistance to feedback and ability to handle high SPLs in excess of 144 dB without distortion. The OM6 vocal microphone has a tight and uniformly controlled hypercardioid polar pattern which helps isolate vocals. Designed with condenser-like qualities, the OM6 has a smooth, rising response between 2 kHz -10 kHz along with a flat, fully extended bass response from 60 Hz - 1 kHz. This, in conjunction with an extremely tailored mid-range, makes the OM6 hypercardioid dynamic vocal microphone an excellent choice for broadcast and live recording. Designed, assembled and tested by Audix in the USA.Specifications:Type: DynamicPolar Pattern: HypercardioidFrequency Response: 40 Hz - 19 kHzImpedance: 290 ohmsSensitivity: 1.5 mV/Pa @ 1kHome studioLive Stage, live recordingLead and backing vocals - all venuesBroadcast Sax, brass, guitar, dobro, flute, percussion, drums​​

The VX5 is a multi purpose, professional vocal condenser microphone designed for live, studio and broadcast applications. With an ability to duplicate studio quality sound on stage, the VX5 has a smooth and accurate frequency response, resistance to feedback and handles very high SPLs without distortion.Designed with a tight and uniformly controlled supercardioid polar pattern, the VX5 condenser vocal microphone helps isolate vocals from the rest of the stage. Other features are a 14 mm gold vapor diaphragm, an acoustically ported steel mesh grill with a multi-stage pop filter, and a -10 dB pad and bass roll-off filter. The VX5 will handle SPLs in excess of 140 dB (with pad and roll-off engaged) and will provide over 20 dB of ambient noise rejection on live stages.In addition to vocal applications, the VX5 supercardioid microphone is designed to capture instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats and pianos.Specifications:Transducer: Type Pre-Polarized CondenserFrequency Response: 40 Hz - 16.5 kHzPolar Pattern: SupercardioidOutput Impedance: 150 ohmsSensitivity 5 mV / Pa @ 1kEquivalent Noise Level 26 dB (A-weighted)Signal to Noise Ratio 68 dBOff Axis Rejection >20 dBMaximum SPL ≥140 dB (w/ -10 pad)Power Requirements: 9-52 VConnector: 3-pin XLRmPolarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of outputXLR connectorMaterials: Finish Zinc Alloy & Machined Brass /Black: FinishWeight: 277 g / 8 ozLength: 181 mm / 7.1 in 

The ND76 is a robust, high-performance, large-diaphragm dynamic cardioid vocal microphone. Designed to be a workhorse for excellent all-around voice applications, the ND76 capsule is precisely tuned to deliver crisp, clear, and balanced vocal presence, as well as superior isolation from sound on the stage.Features:Excellent all-around vocal performanceCrisp, clear and balancedLarge-diaphragm dynamic capsuleCreates a rich and detailed frequency responseShock-mounted capsule minimizes handling noiseLow frequency bumps and thumps won’t get into the PAHumbucking coil guards against line humUse with confidence near speaker cabinets and EMF-generating equipment racksMemraflex grille resists dentingDurable tight-mesh grilles withstand extraordinarily rough treatment​​

The ND86 is a robust, high-performance, large-diaphragm dynamic supercardioid vocal microphone. Designed for excellent acoustic control in even the largest of venues, the ND86 capsule is precisely tuned to deliver present, smooth, and detailed sound, as well as superior isolation from sound on the stage.Features:Excellent acoustic control in even the largest of venuesReduction of low-frequency room tone through high-pass filtering and boosts & cuts in key high-mid frequencies separate the voice from the stage washLarge-diaphragm dynamic capsuleCreates a rich and detailed frequency responseShock-mounted capsule minimizes handling noiseLow frequency bumps and thumps won’t get into the PAHumbucking coil guards against line humUse with confidence near speaker cabinets and EMF-generating equipment racksMemraflex grille resists dentingDurable tight-mesh grilles withstand extraordinarily rough treatmentSpecifications:Element Type: Dynamic neodymium magnet structureFrequency Response, Close: 30 Hz – 17 kHzFrequency Response, Far: 70 Hz – 17 kHzPolar Pattern: SupercardioidSensitivity, Open CircuitVoltage @ 1 kHz:2.4 mV/PascalMaximum SPL: >140 dBPolarity: Pin 2 positive, reference to pin 3 with`positive pressure on diaphragmImpedance: 350 ohms balanced (low-z)Microphone Connector: 3-pin, XLR-typeFinish: Black polyurethane paintMaterial: Zinc die cast handle, Memraflex grille​​

The Electro-Voice ND76S is a robust, high-performance dynamic cardioid vocal microphone. Designed for excellent all-around voice applications, the ND76S capsule is precisely tuned to deliver crisp, clear and balanced vocal presence, as well as superior isolation from sound on the stage. The ND76S dynamic capsule contains a large Mylar diaphragm which delivers a rich and detailed frequency response by combining its large surface area for tonal balance with its low-mass high-velocity material for exceptionally fast transient response. The ND76S features an innovative capsule shockmount system consisting of a 4-point suspension around the circumference of the capsule combined with a tuned pneumatic pump at the capsule base, offering superior handling noise reduction to eliminate mechanical vibrations and noise in the mix. The ND76S capsule uses a humbucking coil that attenuates AC hum and electromagnetic interference. ND dynamic mics can be used with confidence near speaker cabinets and EMF generating equipment racks. The ND76S Memraflex grille is made of a durable tightmesh grille wire that withstands extraordinarily-rough treatment. Your microphone remains protected and looking good gig-after-gig, year-after-year. For additional protection, the ND76S capsule contains a hydrophobic cloth membrane which prevents moisture and debris from reaching the diaphragm.Specifications:Element Type: Dynamic neodymium magnet structureFrequency Response, Close: 30 Hz – 17 kHzFrequency Response, Far: 70 Hz – 17 kHzPolar Pattern: CardioidSensitivity, Open CircuitVoltage @ 1 kHz:2.4 mV/PascalMaximum SPL: >140 dBPolarity: Pin 2 positive, reference to pin 3 withpositive pressure on diaphragmImpedance: 350 ohms balanced (low-z)Microphone Connector: 3-pin, XLR-typeFinish: Black polyurethane paintMaterial: Zinc die cast handle, Memraflex grille screen​​

This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO 31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road.The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO 31 (XLRF-XLRM cable) and PRO 31QTR (XLRF- ¼” cable).Features:Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppressionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHi-ENERGY® neodymium magnet for high output and articulate vocal reproductionTwo-stage ball-type headcase for superior "pop" protectionMagnaLock™ on/off switchCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: DynamicPolar Pattern: CardioidFrequency Response: 60-13,000 HzOpen Circuit Sensitivity: -55 Db (1.7 Mv) Re 1v At 1 PaImpedance: 600 OhmsSwitch: Magnalock™ On/offWeight: 11.0 Oz (312 G)Dimensions: 7.28" (185.0 Mm) Long, 2.09" (53.1 Mm) Head DiameterOutput Connector: Integral 3-pin Xlrm-typeCable: 15.0' (4.5 M) Cable With Xlrf-type Connector At Microphone End, 1/4" Connector At Equipment EndAccessories Furnished: At8470 Quiet-flex™ Stand Clamp For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

This cardioid dynamic step-up is built to survive the realities of day-to-day use and still produce clear, full-range vocal reproduction every time. Its superior internal shock mounting reduces handling noise. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.Features:Natural, full-range vocal reproduction; ideal for close-up vocal use in performanceSuperior internal shock mounting reduces handling noiseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHi-ENERGY® neodymium magnet for articulate vocal reproductionTwo-stage ball-type headcase for superior "pop" protectionMagnaLock™ on/off switchCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90-16,000 HzOpen Circuit Sensitivity: -55 Db (1.7 Mv) Re 1v At 1 PaImpedance: 300 OhmsSwitch: Magnalock™ On/offWeight: 10.7 Oz (304 G)Dimensions: 7.28" (185.0 Mm) Long, 2.09" (53.1 Mm) Head DiameterOutput Connector: Integral 3-pin Xlrm-typeCable: 15.0' (4.5 M) Cable With Xlrf-type Connector At Microphone End, Xlrm-type Connector At Equipment EndAccessories Furnished: At8470 Quiet-flex™ Stand Clamp For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

The ND96 is a robust, high-performance, large-diaphragm dynamic supercardioid vocal microphone. Designed for excellent acoustic control on very loud stages, the ND96’s special structural and acoustical designs create performance characteristics allowing the microphone’s gain before feedback in a mix to be significantly louder than most microphones.Features:Push vocals through the mixStructural and acoustical functions allow the signal to be pushed through incredibly loud ambient volumes without risking feedbackLarge-diaphragm dynamic capsuleCreates a rich and detailed frequency responseVocal presence emphasis switchA selectable voice presence booster reduces certain low-mid frequency areas and emphasizes key upper-midrange vocal presence areas for a more profound vocal edge when driving the voice higher in the mixShock-mounted capsule minimizes handling noiseLow frequency bumps and thumps won’t get into the PAHumbucking coil guards against line humUse with confidence near speaker cabinets and EMF-generating equipment racksMemraflex grille resists dentingDurable tight-mesh grilles withstand extraordinarily rough treatmentSpecifications:Audio Frequency Response: 140 – 15,000Case Material: Die cast zincConnector Type: 3-pin XLRDiameter (Max): 50.5 mm (1.99")Element: DynamicFinish: Black polyurethane paintImpedance, Low-Z balanced: 350 ΩMaximum SPL: > 140 dBMic Type: HandheldOpen Circuit Voltage: 3.3 mV/PascalPolar Pattern: SupercardioidPower Requirement: PassiveShipping Weight: 21.2 oz (601 g)Wired/Wireless: WiredHeight: 170 mm (6.69")Weight Net: 11.39 oz (323 g)​

The V7's road-ready design is all metal - no plastic parts here. The chassis' high quality, highly durable zinc alloy is designed to hold up under on-stage stress for years, and the spring steel mesh grille is dent-proof and corrosion-free for perfect reliability. The V7's gold-plated XLR connector also ensures a loss-free and reliable signal connection for years to come.Efficiently reduces unwanted wind noise and plosive pops....and just in case you don't like our stylish "sE Red" color, we've included a spare black windscreen in the box for you.The DMC7 dynamic element in the V7 has been custom-developed for a crisp, open sound that perfectly captures your voice and instruments in the most natural way you've ever heard on stage - and its sophisticated supercardioid capsule design helps isolate your voice from other instruments, ensuring vast amounts of gain before feedback.Proven Neodymium magnets, tight production tolerances & high-end workmanship ensure excellent sensitivity, superior sound quality and superb consistency.The V7's brand new, patented shockmount efficiently decouples the capsule from mechanical vibration, providing exceptionally low handling noise as compared to other mics in its class. This means you can feel free to move around on stage without fear of rumbles, pops, or anything other than your voice coming through.​Specifications:Capsule: DynamicVoice Coil: AluminumMagnet: NeodymiumDirectional Pattern: SupercardioidFrequency range: 40 Hz - 19 kHzImpedance: 300 OhmsSensitivity: 2.0 mV/Pa (-54 dB)Connectivity: 3-pin male XLRDiameter: 54 mm (2.12 in.)  x  Length: 184 mm (7.24 in.)Weight: 305 g / 10.8 oz 

The V3's road-ready design is all metal - no plastic parts here. The chassis' high quality, highly durable zinc alloy is designed to hold up under on-stage stress for years, and the spring steel mesh grille is dent-proof and corrosion-free for perfect reliability.The V3's gold-plated XLR connector also ensures a loss-free and reliable signal connection for years to come. Efficiently reduces unwanted wind noise and plosive pops....and just in case you don't like our stylish "sE Red" color, we've included a spare black windscreen in the box for you. The dynamic element in the V3 has been custom-developed for a smooth, natural sound on any voice or instrument - and its cardioid capsule design helps efficiently isolate your voice from other on-stage sounds, ensuring plenty of gain before feedback.Proven Neodymium magnets, tight production tolerances & high-end workmanship ensure excellent sensitivity, superior sound quality and superb consistency. The V3's brand new, patented shockmount efficiently decouples the capsule from mechanical vibration, providing exceptionally low handling noise as compared to other mics in its class. This means you can feel free to move around on stage without fear of rumbles, pops, or anything other than your voice coming through​Specifications:Capsule: DynamicVoice Coil: CopperMagnet: NeodymiumDirectional Pattern: CardioidFrequency range: 50 Hz - 16 kHzImpedance: 600 OhmsSensitivity: 2.5 mV/Pa (-52 dB)Connectivity: 3-pin male XLRDiameter: 52 mm (2.05 in.)  x  Length: 181 mm (7.13 in.)Weight: 295 g / 10.4 oz 

The PGA57 is a professional quality instrument microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments. Mountable microphone for amplified and acoustic instrument performance and recording, including guitar amps and snare drumsTailored, dynamic cartridge (does not require phantom power) with cardioid polar pattern. Specifications:Type Dynamic: (moving coil)Frequency Response: 70 to 15,000 HzPolar Pattern CardioidOutput Impedance 150 ΩSensitivity at 1 kHz, open circuit voltage:  -56.5 dBV/Pa (1.5 mV) 1 Pa=94 dB SPLPolarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Weight 280 g (9.88 oz.)Connector Three-pin professional audio (XLR), maleOperating Temperature -20 to 165 °F (-29 to 74 °C)Operating Humidity 0 to 95%

KSM8 redefines dynamic microphone technology for leading performers and engineers. It virtually eliminates proximity effect and provides unmatched vocal accuracy with minimal EQ and processing and has been designed for use in large, complex sound systems. Providing absolute vocal clarity, KSM8 is suited for production studios, live performance venues and broadcast productions.KSM8 has an extremely wide sweet spot, due to the design of the Dualdyne element and its ability to control proximity effect. Additionally, the neutral mid/high frequency response means that there is little external processing required, resulting in consistent, natural-sounding audio, regardless of the artist’s mic technique and placement.Specifications:Transducer Type : DynamicPolar Pattern: CardioidFrequency Response: 40 Hz - 16 kHzSensitivity (1 kHz): -51,5 dBV/Pa / 1,85 mV/PaWeight: 330 g 

KSM8 redefines dynamic microphone technology for leading performers and engineers. It virtually eliminates proximity effect and provides unmatched vocal accuracy with minimal EQ and processing and has been designed for use in large, complex sound systems. Providing absolute vocal clarity, KSM8 is suited for production studios, live performance venues and broadcast productions.KSM8 has an extremely wide sweet spot, due to the design of the Dualdyne element and its ability to control proximity effect. Additionally, the neutral mid/high frequency response means that there is little external processing required, resulting in consistent, natural-sounding audio, regardless of the artist’s mic technique and placement.Specifications:Transducer Type : DynamicPolar Pattern: CardioidFrequency Response: 40 Hz - 16 kHzSensitivity (1 kHz): -51,5 dBV/Pa / 1,85 mV/PaWeight: 330 g 

One of the microphones that Shure is most known for is the SM58, the Ultimate live vocal mic that has been used by some of the best known musicians in the world. The SM58 has had many different versions over the years, and the PGA 58 is the Alta's take on this seminal classic.The PGA 58 is a fantastic mic for both lead singer and backing vocals when onstage. It's super durable, has an included on/off switch and a built in pop shield. The pop shield not only deadens the plosives inherent in vocals to make you sound great, it also protects the precious electronics inside the mic from water vapour from your breath as you sing; this results in an overall longer life without issues!Features:Handheld microphone for lead and backup and performanceDynamic cartridge (does not require phantom power) with cardioid polar patternTailored cartridge design for clear, natural sounding vocal reproductionIncludes PGA48 with On / Off switch, microphone clip, zipper pouch and user guideSpecifications:Frequency Response 50–16,000 HzPhantom power required: NoPolar Pattern CardioidType Dynamic

Prodipe have also invested in manufacturing a vintage style all metal mic body with a polished chrome finish. Yes, we’re bringing back the legendary mics of the 50s!The V85 features a dynamic Prodipe cardioid cartridge and an increased output level which has been painstakingly adjusted by Ludovic Lanen for maximum impact and maximum balance on stage or in the studio. A vintage look that oozes quality with a modern Prodipe sound that oozes technology.Specifications:Type: dynamic microphonePolarity: uni-directionnalFrequency: 60Hz-16KHzSensitivity: - 52dB±3dB (0db=1V/Pa at 1kHz)Output impedance: 600 Ω ±30% (at1kHz)

The PGA48 delivers excellent sound for spoken word and karaoke performance. Available with various cable options and a discrete On / Off switch.Specifications:Handheld microphone for spoken word and karaoke performanceDynamic cartridge (does not require phantom power) with cardioid polar patternTailored cartridge design for clear reproduction of speechFrequency Response: 70–15,000 HzPolar Pattern: CardioidType: DynamicIncludes PGA48 with On / Off switch, microphone clip, zipper pouch and user guide

Some products are born classics and the M 88 has to take centre-stage for being far ahead of its time when it was first introduced in the 1960`s. Incorporating a new low-mass diaphragm element, the M 88 TG has earned its place in history in the Kick Drum (for this application, the use of an external popshield like PS 88 or WS 59 is strongly recommended). Sound engineers have found that the lightning-fast transient response of the microphone reproduces the complex sound patterns of this instrument resulting in the tight `thump` without the need for complex signal processing. This characteristic works equally well on other instruments especially where intricate low frequencies and their harmonics need to be captured. The M 88 TG is one of the most frequently specified microphones by sound engineers worldwide and heralded a beyerdynamic contemporary classic as this microphone becomes renown for capturing emotive audio signals. Specifications:Extended frequency range with very soft presence boost and exceptional bass reproductionHigh gain-before-feedbackIntegrated hum-buck coilHigh SPL handling capabilityRugged constructionSupplied with microphone clamp and storage bag

The reliable and rugged all-around TG V35d s model is a dynamic vocal microphone that is perfect for beginners. Its natural sound that is typical for beyerdynamic and its supercardoid polar pattern with high feedback rejection are valued by vocalists, DJs and speakers in rehearsal rooms and on the stage. Thanks to the high output level, the TG V35d s only needs a simple pre-amplifier in order to deliver impressive results. It features a noiseless on/off switch and includes an XLR cable, clamp and storage bag.

The new standard for the stage an exceptionally powerful sound that never comes across as obtrusive – that’s the basis of the TG V50d and the TG V50d s. The combination of sleek design and rugged construction that is perfect for the stage, this exceptional sound makes the TG V50d a reliable companion that you will never want to be without. That is the definition of the new standard for the stage.Whether in the rehearsal room or on a stage of any size, the dynamic TG V50d is an excellently tuned live vocal microphone. Especially notable are its balanced sound that is both powerful and natural, its very wide pick-up range thanks to its cardioid polar pattern, and its high feedback rejection; the whole product range is also outstanding in its handling, ruggedness, look and touch. The readiness of the TG V50d is also impressive – plug it in, activate the high-pass filter and it’s ready. It is advantages like these that will win it many fans for use in lead and backing vocals of all music genres as well as by professional rental companies and sound technicians.The TG V50d is also available with a switch as the TG V50d s. The switch, which is embedded in the grip, can be locked and doesn’t emit any ‘clicking’ sound.

The new standard for the stage an exceptionally powerful sound that never comes across as obtrusive – that’s the basis of the TG V50d and the TG V50d s. The combination of sleek design and rugged construction that is perfect for the stage, this exceptional sound makes the TG V50d a reliable companion that you will never want to be without. That is the definition of the new standard for the stage.Whether in the rehearsal room or on a stage of any size, the dynamic TG V50d is an excellently tuned live vocal microphone. Especially notable are its balanced sound that is both powerful and natural, its very wide pick-up range thanks to its cardioid polar pattern, and its high feedback rejection; the whole product range is also outstanding in its handling, ruggedness, look and touch. The readiness of the TG V50d is also impressive – plug it in, activate the high-pass filter and it’s ready. It is advantages like these that will win it many fans for use in lead and backing vocals of all music genres as well as by professional rental companies and sound technicians.The TG V50d is also available with a switch as the TG V50d s. The switch, which is embedded in the grip, can be locked and doesn’t emit any ‘clicking’ sound.

Another microphone from the "workhorse stable", the M 201 TG preserves its place in history through sheer performance and reliability and we are proud that it has come to feature here with the classics. A truly sensitive dynamic microphone with a range of applications spanning instruments to vocals, being particularly effective when the microphone has to be placed at a distance from the sound source. It incorporates a "hum-buck" coil that rejects mains borne interference introduced when using the microphone close to video monitors or other mains powered devices.Specifications:Universal microphone for instrument mikingIntegrated hum-buck coilSmall dimensions for unobtrusive positioningRugged constructionSupplied with microphone clamp and storage bag

Every comparison needs a reference – data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96c true condenser microphone – the benchmark for live vocals assumes this role.The strength of the TG V96c lies in its absolutely faithful reproduction - even of the finest nuances and on stage every detail counts. The microphone’s exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what’s inside that makes the TG V96c into a topclass microphone and makes it stand out with vocalists, professional rental companies and sound technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and nobtrusive sound pattern.Further advantages: the TG V96c can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation. The TG V96c is rugged enough for the stage and is supplied with an individual frequency response curve print out.

Whether it’s the feel or the sound, the dynamic TG V70d live vocal microphone with a hypercardioid polar pattern is sure to impress both on the stage and behind the mixing console – for the singer, the audience and the rental company.The reasons: the powerful, extremely well resolved sound, the excellent feedback reduction and a marked proximity effect with saturated bass to support less powerful voices. Even without help from the tone control of the mixing console, it delivers an impressively rounded and exceptionally powerful sound. In other words: you only have to plug it in and activate the high-pass filter and you’re done. Additional to its great looks, its handling and well-thought-out housing construction with a progressively damped capsule suspension for low handling noises will make it the standard for stage professionals.

The Beyerdynamic TG V70d s Electret Condenser Hypercardioid Microphone is a professional handheld microphone and an ideal choice for vocal performances, speech and instrument reproduction during live sound reinforcement applications. The hypercardioid polar pattern minimizes off-axis noise and feedback. Its rugged exterior is sure to handle the rigors of life on the road, in nightclubs, houses of worship, recording studios and more. Features on / off switchHypercardioid polar patternHigh gain before feedbackRugged construction to withstand touring damageShock mounted microphone capsuleSupplied with microphone clamp and storage bag 

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzOpen Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 113 dB, 1 kHz at Max SPLSignal to Noise Ratio: 71 dB, 1 kHz at 1 PaPhantom Power Requiremens: 48V DC, 2 mA typicalWeight: 233 g (8.2 oz)Dimensions: 179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The Audio-Technica PRO 31 microphone has a cardioid polar pattern that reduces sound pickup s from the sides and rear, improving isolation of the desired sound source. Hi-ENERGY neodymium magnet for high output and articulate vocal reproduction. 2-stage ball-type headcase for superior "pop" protection. MagnaLock on/off switch. Corrosion-resistant contacts from gold-plated XLRM-type connector. Rugged design and construction for reliable performance.Features:Dynamic element60-13,000Hz frequency responseXLRM-type output connectorQuiet-Flex stand clamp5/8" to 3/8" threaded adapter15' cable XLRF-XLRMSpecifications:    Element: Dynamic    Polar Pattern: Cardioid    Frequency Response: 60-13,000 Hz    Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa    Impedance: 600 ohms    Switch: MagnaLock™ on/off    Weight: 11.0 oz (312 g)    Dimensions: 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter    Output Connector: Integral 3-pin XLRM-type    Cable: 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end

The Audio-Technica AE6100 is a dynamic mic that delivers great presence and sound that cuts through monitor mixes. The AE6100 microphone has high output for fast transients and clean articulation. Maximum feedback and pop rejection. Tough, durable construction for road use.Features:Great presence with excellent monitor cutHigh output, fast transients, and clean articulationMaximum feedback rejectionSuperior anti-shock engineering for low handling noiseOutstanding pop protectionSpecifications:Element: dynamicPolar pattern: hypercardioidFrequency response: 60Hz-15kHzOpen-circuit sensitivity: -55dB (1.7mV) re 1v @ 1PaImpedance: 250 ohmsWeight: 10.9 oz.Output connector: XLRM

The Audio-Technica PRO 61 is an exceptional vocal stage microphone. A dynamic mic that delivers outstanding gain before feedback, the PRO 61 has plenty of the presence needed for lead vocals. Its hypercardioid polar pattern improves isolation of the voice from surrounding sounds. The PRO 61 mic's superior internal shock mounting eliminates handling noise. A neodymium magnet yields the articulate reproduction needed for vocal use. Rugged Audio-Technica design and construction assure that the PRO 61 will serve you reliably with a long use life. Features:Excellent gain before feedbackOutstanding stage presence for lead and back-up vocalsExtended frequency response for optimal clarity and smooth, natural sonic characteristicsHypercardioid polar pattern improves isolation of desired sound sourceSuperior internal shock mounting reduces handling noiseHi-ENERGY neodymium magnet for articulate vocal reproduction2-stage ball-type headcase for superior "pop" protectionGold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: dynamic ÀImpedance: 300 ohmsPolar Pattern: hypercardioidWeight: 11-3/4 oz (335 g)Frequency Response: 70 - 16,000 HzOutput Connector: XLRM-typeOpen Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa

Tuned for clear, detailed, extended-range reproduction of lead and backup vocals, the ATM610 Hypercardioid dynamic vocal mic is equipped with a rare earth neodymium magnet, a tight hypercardioid polar pattern and multi-stage grille design. The Audio Technica microphone features an innovative dual-wall floating construction; the back-cavity assembly "floats" inside the handle shell, providing outstanding isolation from handling noise. Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source.Features:Durable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-Energy neodymium magnet for articulate vocal reproductionMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar pattern: HypercardioidFrequency response: 40-16,000 HzOpen circuit sensitivity: —55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 280 g (9.9 oz)Dimensions: 177.0 mm (6.97") long, 48.0 mm (1.89") diameterOutput connector: Integral 3-pin XLRM-typeAccessories furnished: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-technica case style: T6

The Audio Technica AT8031 microphone is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.Features:Ideal for close-up vocals, overheads, piano and stringsLow-mass diaphragm ensures minimum distortionCardioid pattern provides added warmth when used close upOperates on battery or phantom powerRoHS compliant free from all substances specified in the EU directive on hazardous substancesSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom —44 dB (11.2 mV) re 1V at 1 Pa, Battery —45 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 250 ohms; Battery 300 ohmsMaximum Input Sound Level: Phantom 137 dB, 1 kHz at 1% T.H.D., Battery 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 113 dB, 1 kHz at Max SPL, Battery 99 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 7.2 oz (205 g)Dimensions: 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouchAudio Technica Case Style: S7

Equipped with newly designed internal shock mounting for reduced handling and stage noise, the ATM510 from Audio-Technica is designed for smooth, natural vocal reproduction and low noise. This cardioid dynamic workhorse features super-durable construction for long-lasting performance, a rare-earth magnet for high output, and a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. The ATM510 is enclosed in a rugged housing, and its multi-stage windscreen effectively controls popping, distortion from sibilant sounds and wind noise. The included AT8470 Quiet-FlexTM stand clamp permits mounting on any microphone stand with 5/8"-27 threads.Features:Newly designed internal shock mounting reduces handling and stage noiseTailored for smooth, natural vocal reproductionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsRare-earth magnet for improved output and transient responseExcellent off-axis rejection for minimum feedbackMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorSpecfications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90Hz-16kHzOpen Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: .57 lb. (9.1 oz.)Dimensions: 6-11/16" (170mm) long; 2-1/8" (53.7mm) diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-Technica Case Style: T6

The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: 40 dB (10.0 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 127 dB, 1 kHz at Max SPLSignal to Noise Ratio: 73 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.5 mA typicalWeight: 274 g (9.7 oz)Dimensions: 179.0 mm (7.05") long, 50.0 mm (1.97") diameterOutput Connector: Integral 3-pin XLRM-type

The AKG  P 3S microphone is ideal for backing vocals, guitar,wind, instruments and many other applications. Rugged performance microphone designed for backing vocals and instruments. Rugged wire mesh cap with internal windscreen. Die-cast metal body. Complete with stand adapter and zip bag.

Shure Super 55 Deluxe Dynamic Vocal Microphone new follow-Up 'Elvis' mic with cardioid polar pattern, stand adapter, improved capsule with reduced feedback/handling noise ratio, Optional Reduction Thread Adapter 104948.

The predecessor to the SM57, The 545SD Classic Unidyne® Instrument Microphone is a dual-impedance, unidirectional, dynamic microphone.Shipped connected for low-impedance operation, the 545SD features a silent magnetic reed on/off switch with lock-on option. A favorite for instrument pickup and recording, the 545SD can also be used on lecterns in public address systems.

Equally at home in sound reinforcement and recording applications, the DPA d:facto is a high quality stage vocal microphone with extraordinary natural sound, high separation from nearby sound sources and extreme sound level handling. Its supercardioid pattern and superb definition gives high separation and true sound color on stage, equally suitable for PA amplification and recording. A robust three-stage pop protection grid built into the microphone removes unwanted noise. The d:facto II provides improved audio performance as it is superbly linear in frequency and phase, both on- and off-axis, while its impressive definition and accuracy reproduces a singer’s voice effortlessly. Adapter systemThe new d:facto II guarantees users exceptional DPA sound with popular existing wireless systems such as Sony, Lectrosonics, Shure, Wisycom and Sennheiser. The flexibility of its adapter system gives the user simple and very affordable possibilities of choosing either a wired DPA handle or the professional wireless system of their choosing, with no loss in the sound quality.

When compared to other handheld vocal microphones, the KMS 105 offers a superior resolution of the voice, with extended frequency response and accurate transient detail. Sibilance problems common to other handheld condenser mics are eliminated. No foam is used in the basket, thus eliminating any clouding or muffling of the sound. Also, by using a DC-polarized studio condenser capsule, all the nuances of the voice come through with subtlety, power and focus.The K 105 capsule was developed from the K 50, found in the KMS 150, KM 150 and KM 185 microphones. The K 105 features a supercardioid pattern, achieved by specially modifying the response of the K 50 pressure gradient transducer. The frequency response characteristic is developed in the acoustic realm, allowing for accurate representation of transient details found in music and speech, and thus transmitting a very open and detailed capture of the human voice. Due to the tight supercardioid polar pattern and the coloration-free off axis response, a very high level of gain before feedback is achieved. This polar pattern offers the highest degree of isolation while still allowing for a generous sweet spot in front of the microphone. The dynamic range of the KMS 105 is 132 dB, allowing reproduction of the artists full expression, without restraint. The maximum SPL is 150 dB and with a low self noise of 18 dB-A, a greater gain can be used without risk of adding noise to the mix. This way, the artist is able to use the microphone at a greater distance therefore maintaining a wide range of creative freedom during the performance. Because of the superior resolution and linear high frequency response, it is very easy for the artist using in-ear monitors to identify whether or not he or she is on mic with the KMS 105. And by employing a transformerless output circuit, this microphone can incorporate long cable runs with no loss of signal quality or high-frequency response. Most of the available vocalist microphones rely on the attenuating effects of foam layers inside the basket. Although this is certainly a cost-effective procedure, the detrimental effects of this foam layer can be shown quite easily. Treble frequencies are attenuated, and furthermore the polar pattern can be deformed. These drawbacks can be eliminated by selecting open mesh constructions. With careful dimensioning and selection of different mesh sizes, excellent pop and wind attenuation can be delivered. In the KMS 105 a combination of four wire meshes with different mesh sizes is used. The chosen combination yields a very constant polar pattern, while maintaining the capsules acoustic frontal frequency response. Naturally, the outer microphone basket is hardened steel, due to the required ruggedness for on-stage use.Features:Neumann sound on stageExcellent transparency for vocals/ speech and as an AnnouncerΆs mic for broadcasting/dubbingHigh SPL capability at 150 dB and a low self noise of 18 dB-AWithout off-axis colorationTransformerless outputEspecially suited for in-ear-monitoringSupercardioid polar pattern with excellent feedback rejectionEffective pop shielding without any side effectsSet includes SG 105 Stand clamp and Padded nylon bagSpecifications:Acoustical operating principle: Pressure gradient transducerDirectional pattern: supercardioidFrequency range: 20 Hz - 20 kHzSensitivity at 1 kHz into 1 kohm: 4.5 mV/PaRated impedance: 50 ohmsRated load impedance: 1000 ohmsEquivalent SPL CCIR 468-3: 28 dBEquivalent SPL DIN/IEC 651: 18 dB-AS/N ratio CCIR 468-3: 66 dBS/N ratio DIN/IEC 651: 76 dBMaximum SPL for THD 0.5%: 150 dBMaximum output voltage: 12 dBuDyn. range of the mic. amplifier DIN/IEC 651: 132 dBSupply voltage: 48 V ± 4 VCurrent consumption: 3.5 mAMatching connector: XLR 3FWeight: approx. 300 gDiameter: 48 mmLength: 180 mm