PA Amplifiers

Since the 1976 release of the P2200, our first professional power amplifier, Yamaha has strived to achieve the highest possible levels of sound quality, power output, and reliability in sound reinforcement, studio, and installed applications.The new PX series power amplifiers continue this tradition of excellence, utilizing Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light, durable design, capable of delivering maximum output power to the speakers while simultaneously protecting them with optimized processing. Driven by a newly-developed Class-D amplifier the four new models that make up the PX series are suitable for a broad range of sound reinforcement and installation environments.The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. Features:2x 800W at 8Ω2x 1050W at 4ΩNewly developed Class-D amplifier engine with a custom LSIFlexible onboard PEQ, crossover, filters, delay, and limiter functionsYamaha Speaker presetsUtlities for safe and secure operationSpecifications:Type: Final AmplifierPower: 1050W x 2 / 4Ω, 2 x 800W x 8ΩFrequency response: -Line Inputs: XLR-3-31 x2, 1/4 "PHONE(TRS) x2Outputs: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2Total harmonic distortion (THD): 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)Dimensions: 48 x 8.8 x 38.8 cmRack Mount: YesWeight:    6.9 KgType: Low ImpedancePower 4Ω: 500W-1000WRack Mount: 2U 

Two-channel, 350W @ 4Ω Power AmplifierSpecifications:Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power triggerPeakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup

Two-channel, 525W @ 4Ω Power AmplifierSpecifications:Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power triggerPeakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup

Amplifier 2x800W/4O-520W/8O-1Ch1600W bridge amplifier 8W. Stereo / Parallel / Bridge mode. 0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post.Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 15.2 kg.

Amplifier 2x300W/4O-200W/8O-1Ch600W bridge amplifier 8W. Stereo / Parallel / Bridge mode.0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post. Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 12.2 kg.

The GDX 8 from QSC is a professional power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 4500W. The GDX 8 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 13.2 lbs. The integrated DSP section includes High and Low-Pass filters (24 dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting. Specifications:4500W Max Power OutputMatched for 4 Ohm and 8 Ohm SpeakersEfficient Class-D Power AmplifierBuilt-In DSP Speaker ProcessorHigh & Low-Pass Filters with 4-Band EQDigital Limiting with Speaker ProtectionLCD DisplayParallel XLR and 1/4" InputsBinding Post and NL4 Speaker ConnectsLightweight: 7.8 kg

The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.Specifications:High peak output power with up to 1600 WPower levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4-ohm and 8-ohm speaker systemsClass-D output stage with a universal power supply for high performance and efficiencyExtensive built-in loudspeaker processing, includes high & low-pass filters, 4-band PEQ, limiting, and delayLarge LCD display simplifies amplifier setup and indicates amp statusInputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capabilityPrecision rotary encoders for gain and DSP parameter controlOutputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connectionsDigital Limiting automatically protects the amplifier from damage due to temperature rise or overdriveAdjustable speaker protection to match your loudspeaker’s power and impedanceFront panel LEDs indicate signal presence, input overload, and amplifier clipping

QSC RMX 4050A. Professional quality performance incorporates road-proven QSC designs. The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 850A. Professional quality performance incorporates road-proven QSC designs.Features: The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon® outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 5050A. Professional quality performance incorporates road-proven QSC designs The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 2450A. Professional quality performance incorporates road-proven QSC designs. The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

The EP2000 and EP4000 represent everything musicians love about our popular EP1500 and EP2500—excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect amplifiers for medium-sized club gigs, mobile PA systems, church services or public spaces. The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input. A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. Since this all happens in just a few thousandths of a second, it’s the ideal way to avoid audible clipping distortion. Rickety stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50 Hz or 30 Hz (depending on your PA system’s capabilities). The same panel contains the switches that put these amps to work in either Stereo or Bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into Parallel mode.There are plenty of awesome features on the outside of the EP2000 and EP4000, but there’s also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers.The EP2000 and EP4000 have both XLR and 1/4" TRS Inputs, plus Speakon-compatible Outputs and 5-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.  The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rack-mount chassis helps these workhorses stand up to all the rigors of the road.

The EP2000 and EP4000 represent everything musicians love about our popular EP1500 and EP2500—excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect amplifiers for medium-sized club gigs, mobile PA systems, church services or public spaces. The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input. A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. Since this all happens in just a few thousandths of a second, it’s the ideal way to avoid audible clipping distortion. Rickety stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50 Hz or 30 Hz (depending on your PA system’s capabilities). The same panel contains the switches that put these amps to work in either Stereo or Bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into Parallel mode.There are plenty of awesome features on the outside of the EP2000 and EP4000, but there’s also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers.The EP2000 and EP4000 have both XLR and 1/4" TRS Inputs, plus Speakon-compatible Outputs and 5-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.  The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rack-mount chassis helps these workhorses stand up to all the rigors of the road.

American Audio VLP-1000 Power Amplifier.Specifications:Bridge Mode, Mono 820W RMS  8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz  8 Ohms)Frequency Response: (+/-01db, rated output Power, 8 Ohms): 20Hz - 20K HzSlew Rate: 15V Per usecDamping Factor:  8 Ohm: 300Impedance: 20 Ohms balanced / 10 Ohms unbalancedCooling System: 2 individual fansSpecial Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiterbuild in clip limiterInput: XLR 3pin + Jack 6,3mmoutput: Speakon + Binding postDimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spacesWeight: 15 KG.Output Power:500W RMS Per Channel  4 Ohms, 1kHz, 0.1% THD330W RMS Per Channel  8 Ohms, 1kHz, 0.1% THD

The American Audio VLP-600 power amp delivers powerful performance with unmatched economy. Pumping out 300W RMS per side at 4 ohms, 200W RMS per channel at 8 ohms, and 300W RMS bridged mono at 8 ohms, the rackmountable VLP-600 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post and Speakon outputs.Specifications:Output Power: 300W RMS per channel  4 Ohms, 1kHz, 0.1% THD 200W RMS per channel  8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS  8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less than 0.1% (20Hz - 20kHz  8 Ohms)Frequency response: (+/-01db, rated output Power, 8 Ohms): 20Hz - 20K HzSlew Rate: 15V per usecDamping Factor  8 Ohm: 300Impedance: 20 Ohms balanced / 10 Ohms unbalancedCooling system: 2 indivdual fansSpecial features: High/low pass filter / input sensitivity selector / Ground lift limiterHigh/low pass filterInput sensitivity selectorlimiterGround lift

The American Audio VLP300 power amp delivers powerful performance with unmatched economy. Pumping out 150W RMS per channel at 4 ohms, 100W RMS per channel at 8 ohms, and 300W RMS mono at 8 ohms, the rackmountable American Audio VLP300 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Specifications:Output Power: 150W RMS Per Channel  4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel  8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono)300W RMS  8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz  8 Ohms)Frequency response: (+/-01db, rated output Power, 8 Ohms): 20Hz-20KHzSlew Rate: 15V per usecDamping Factor  8 ohm: 260Impedance: 20 Ohms balanced / 10 Ohms unbalancedCooling system: 2 individual fansHigh/low pass filterInput sensitivity selector

The American Audio VLP-1500 power amp gives you power to spare at a stunningly low price. The VLP-500 is rated at 750W RMS per channel at 4 ohms, 500W RMS per channel at 8 ohms, and 1,500W RMS bridged mono at 8 ohms. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Specifications:Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz  8 Ohms) Frequency Response: (+/-01db, rated output Power, 8 Ohms): 20Hz - 20K HzSlew Rate: 15V Per usecDamping Factor  8 Ohm: 300Impedance: 20K Ohms balanced / 10K Ohms unbalancedCooling System: 2 indivdual fansSpecial Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / LimiterDimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spacesWeight: 42 lbs. / 19 Kgs.Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; LimiterOutput Power: 750W RMS Per Channel  4 Ohms, 1kHz, 0.1% THD  500W RMS Per Channel  8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 1500W RMS  8 Ohms, 1K Hz, 1% THD

The GX5 uses a Class H system, based on key elements of the PL Series, (PLX, PL3, CX, DCA) almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss. Both amplifiers use premium toroidal power transformers for reliable "mid-weight" performance. A variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink. This keeps the transformer cool and allows a full size heat sink to fit in a down-sized chassis.Specifications:8 ohms / 1 kHz (both channels driven): 500 W8 ohms / 1 kHz (single channel driven): 600 W4 ohms / 1 kHz (both channels driven): 700 W4 ohms / 1 kHz (single channel driven): 850 W Distortion (1 dB below rated power, 1 kHz): 8 ohms: less than 0.02%, 4 ohms: less than 0.05% Signal to Noise (20 Hz - 20 kHz): 100 dB Input Sensitivity: 1.2 VrmsVoltage Gain (8 ohms): 34.4 dB Output Circuitry: 2-tier Class HPower Requirements (1/8 power, pink noise at 4 ohms, 120V): 6A Frequency Response: 20 Hz - 20 kHz, +0, -1 dB Dynamic Headroom (4 ohms): 2 dB Input Impedance (ohms): Greater than 20k (balanced) Maximum Input Level: +24 dB (16 Vrms) Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced Output Connectors (each channel): Speakon, 1/4", Binding Posts Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults Front Panel Controls and Indicators: Gain controls, 21 detents Red Clip LEDs, proportional, 0.1% THD threshold Green Signal LEDs, threshold -35 dB Blue Power LED, AC on Rear Panel Controls: Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top)Dimensions: Height: 3.5" (89 mm) 2RU, Width: 19" (483 mm), Depth: 10.1" (257 mm) Weight: Net: 28 lbs (12.6 kg), Shipping: 32 lbs (14.6 kg)

The GX3 is ideal for speakers in the 300 watt (Program) range, while the GX5 provides full performance for 500 watt (Program) speakers. The GX7 outputs 725 watts into an 8 ohm load. Owners of popular 4 ohm loudspeakers (such as dual-woofer, two-way models) will find the 700 watt (4 ohm) power of the GX5 an ideal match while the GX7's 1000 watts will very capably power many of today's popular subwoofers or two typical 8 ohm speakers per channel.The GX3 uses the latest evolution of the QSC Grounded Collector output system, for optimum cooling of the critical power transistors. A true Class B biasing system combines maximum thermal efficiency with excellent audio performance.Specifications:8Ω / both channels driven / 1 kHz: 300 W8Ω / single channel driven / 1 kHz: 350 W4Ω / both channels driven / 1 kHz; 425 W4Ω / single channel driven / 1 kHz; 500 WDistortion (typical): 20 Hz - 20 kHz: 1 dB below rated power 8Ω: less than 0.05% / 4Ω: less than 0.1%Signal to Noise: (20 Hz - 20 kHz) 100 dBInput Sensitivity: 1.2 VrmsVoltage Gain: (8Ω) 32.2 dBOutput Circuitry: Class BPower Requirements: (1/8 power, pink noise at 4Ω, 120 V) 6.3AFrequency Response: 20 Hz - 20 kHz, +0, 1 dBDynamic Headroom (4Ω): 2 dBDamping Factor: 100Input Impedance (Ω): Greater than 20k (balanced)Maximum Input Level: +24 dB (16 Vrms)Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalancedOutput Connectors (each channel) Speakon®, 1/4", Binding PostsAmplifier and Load Protection: Short circuit, open circuit, thermal, RF protectionLoad protected against DC faultsFront Panel Controls and Indicators: Gain controls, 21 detentsRed Clip LEDs, proportional, 0.1% THD thresholdGreen Signal LEDs, threshold -35 dBBlue Power LED, AC onRear Panel Controls: Full Range / Crossover switch100 Hz, 3rd order LP (sub), 2nd order HP (top)Dimensions (HWD): 3.5" (2RU) x 19" x 10.1" (89 mm x 483 mm x 257 mm)  

Amplifier 2x1600W/4O-1250W/8O-1Ch3200W bridge amplifier 8W. Stereo / Parallel / Bridge mode.0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post.Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 18.7 kg.

Amplifier 2x450W/4O-330W/8O-1Ch900W bridge amplifier 8W. Stereo / Parallel / Bridge mode. 0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post. Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 13.7 kg.

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 16.2" Weight 24 lbs (10.9 kg) Shipping Weight 30 lbs (13.6 kg) IEC Power Connector 20A

DSP controlled Power: 2x 1600 W (2 ohm), 1200 W (4 ohm), 650 W (8 ohm), 2400 W bridge (8 ohm), 3200 W bridge (4 ohm) DSP Applications: input EQ with 6 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain Crossover with high and low pass Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain Delay up to 50 ms Subharmonic synth Peak plus limiter with adjustable threshold, attack and release 50 Presets 3 Switchable fan-mode controls HiQnet band manager and system architect control software via USB port Display for the mains voltage and power supply temperature Connectors: 2x NL4 speaker twist out, binding post out, XLR in/ out Dimensions: 19” (485 mm) x 2 U (89 mm) x 311 mm Weight 8.4 Kg

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 700W 2Ω, 500W 4Ω, 275W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A

here's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 1000W 2Ω, 800W 4Ω, 475W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A

 Phonic΄s MAX 2500 Plus Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 Plus amp is achieved via balanced XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 2500 Plus features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application. 

Phonic΄s MAX 1500 Plus Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 Plus amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 Plus features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.

The COM12 is a public address amplifier, with a power up to 120 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The COM24 is a public address amplifier, with a power up to 240 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The CAP412 is a professional four channel 100V power amplifier which is capable of providing 120 Watt to each of the four separate output channels. This creates a great flexibility and new possibilities for installed Multi-Zone audio distribution systems.

Amplifier Switching with power 2X1000W/2Ω, 2X800W/4Ω & 2Χ800W/70V. Bridge operation possibility, power supply for operation in any voltage, LCD screen, embodied DSP processor with ready presets for various speakers, EQ, limiting, compression, delay, crossover frequencies & subharmonic synthesizer. Balanced inputs with phoenix connectors outputs with barrier strip. Management through PC (USB) compatible with HiQnet. Suitable for permanent installations. Weight 10Kgr.

The American Audio VLP-2500 power amp gives you power to spare at a stunningly low price. The VLP-500 is rated at 750W RMS per channel at 4 ohms, 500W RMS per channel at 8 ohms, and 1,500W RMS bridged mono at 8 ohms. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Specifications: 1100W RMS Per Channel  4 Ohms, 1kHz, 0.1% THD 700W RMS Per Channel  8 Ohms, 1kHz, 0.1% THD 2200W RMS  8 Ohms, 1K Hz, 1% THD (Bridge Mode, Mono) Total Harmonic Distortion: Less Than 0.5% (20Hz - 20kHz  8 Ohms) Frequency Response: (+/-05db, rated output Power, 8 Ohms): 20Hz - 20K Hz Slew Rate: 20V Per usec Damping Factor  8 Ohm: 450 Impedance: 20K Ohms balanced / 10K Ohms unbalanced Cooling System: 2 high speed cooling fans Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter Dimensions (LxWxH): 17.75" x 19" x 3.5" / 453 x 482 x 88mm (2 rm spaces) Weight: 50 lbs. / 23 Kgs.