Live Mixers

The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.The mixing section starts with 6 lowest noise, discrete microphone preamps. 3 auxiliary busses, one of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.The built in USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package. The 9 band stereo graphic equalizer allows precise tone control for speakers and room matching.The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.Feautures:Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms2 High-Quality editable effects, 100 factory and 20 user presetsProfessional 4x4 24-bit / 96 kHz USB interface with MIDILightweight (9.5 kg) road-ready package with extra robust cover-lid 

The PowerMate compact power mixers incorporate profound know‑how, based on our research, development and inter‑communication with our customers in the professional audio market, for decades.It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand‑alone device. The PowerMate is a real all‑rounder for almost all applications with maximum feature set at minimum size.The mixing section starts with 10 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate‑reverbs. Further, each preset can be edited and stored to 20 User memories.Feautures:Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms2 High-Quality editable effects, 100 factory and 20 user presetsProfessional 4x4 24-bit / 96 kHz USB interface with MIDILightweight (14 kg) road-ready package with extra robust cover-lid

TASCAM has continuously been providing industry-leading recording solutions for decades, such as the TASCAM 38 Open Reel 8-track, the DA-88 Digital 8-track and the legendary Portastudio Cassette and Digital Multitrack recorders. TASCAM now builds on this legacy to deliver a new classic: the Model 24 Multitrack Recorder/Mixer/Interface.Whether used for rehearsal, live shows or studio production, this triple-function recording console perfectly meets the needs of today’s working and recording musicianFeatures:All-in-One, Multitrack Recorder with 22 channel Mixer and USB Audio InterfaceWAV 48kHz/24-bit, 24 channel multitrack recording to SD, SDHC and SDXC cardsBuilt-in USB Audio Interface to send/receive audio data to/from DAW22 Inputs (20 Balanced, 12 Monaural, and 4 Stereo)16 TASCAM Microphone PreampsInput Mode switch on every input channelTASCAM Ultra-HDDA Mic Pre-amp (Channels 1 to 12)Preamp Gain Controller with Overload indicator (Channels 1 to 12)7-band Graphic EQ16 Pre-set Effects100mm Long-throw Faders for precise adjustmentMute, Main/Sub, PLF switches on every input channelBluetooth® input supporting both AAC and SBC codecsSUB Outputs via XLR Balanced and RCA Unbalanced connectorsLINE Inputs via RCA Pin and ⅛" Stereo Mini jacks3 AUX Outputs (Monitor 1, Monitor 2, FX)1 Stereo Output for Control RoomPhantom Power (+48V)¼" Stereo Headphone OutputBacklit buttons for key operations such as REC and PlayMulti Jog-dial for quick menu operation12-segment LED Output Level Meters24 input channels, each with:XLR mic and ¼” line inputsHigh-headroom Class A XMAX™ mic preamplifiersAnalog ¼' inserts (rear panel)Trim control with –20 to +20 dBV line / -15 to +65 dBu mic gain range (80 dB!)+48V phantom power switch for condenser microphonesDigital Audio Input Select100 mm precision fadersPhase reverse, highpass filter, noise gate/expander, compressor, 4-band EQ, limiter—all with A/B and Quick Null40 in x 26 outFireWire s800 direct digital recording interface (24-bit/44.1 kHz and 48 kHz)Compatible with ASIO and Core Audio; works with Logic®, Pro Tools, Cubase, Sonar™, Digital Performer™, Live, and more20 dedicated mix buses for easy configuration14/10/6 aux buses with analog outputs4 internal FX buses4 subgroups with analog outputs4 subgroup buses, each with14 aux buses, each withStereo main bus with analog outputsBalanced TRS outputSoloMutePre1/Pre2/post-fader sendOutput-level controlHighpass filter, noise gate/expander, compressor, 4-band EQ, limiter — all with A/B and Quick Null 31-band graphic EQ with A/B and Quick NullAvailable sources: 32/24/16 input channels, Aux In A and B, Tape Input, Main digital-audio return, FXA, FXB, FXC,Access to Fat Channel functionsInput/Output32/24/16 main inputs, each with XLR mic, ¼' line, and ¼' inserts2 ¼' balanced stereo (L/R) aux inputs1 XLR talkback-mic input with XMAX™ preamp, phantom power (always on), and level controlUnbalanced RCA stereo (L/R) tape inputs and outputsXLR stereo (L/R) main outputs with level control¼' balanced stereo (L/R) main outputsXLR mono output with level control¼' balanced stereo (L/R) control-room outputs¼' headphone output4 ¼' balanced subgroup outputs14/10/6 ¼' balanced aux outputs32/24/16 pre-insert, balanced direct outputs, Ch. 1-8, 9-16 (17-24, 25-32) on DB25 socketsDedicated USB 2.0 port and included Wi-Fi LAN adapter for wireless communicationsInstalled Option Card with:S/PDIF digital out2 FireWire S800 portsOptional I/O cardsThunderboltDanteAVBIntegrated softwareVirtual StudioLive-AI bidirectional control/editor/librarian with Smaart Measurement Technology™Studio One®Artist Digital Audio Workstation software for Mac®and Windows®Capture™ multitrack recording software for Mac and WindowsStudioLive Remote-AI mixer-control software for iPad®available free from Apple App StoreQMix™-AI aux-control software for iPhone®and iPod touch®available free from Apple App Store- See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=135894#sthash.hGeEmCj2.dpuf 

The perfect partner for a StudioLive Series III console.The StudioLive 16R Series III rack mixer is a perfect partner for your StudioLive Series III console/recorder, serving as either a simple stage box or a combination stage box and monitor mixer. Since Series III rack mixers and consoles can network using AVB, you can connect your StudioLive 16R to a Series III front-of-house console with one lightweight CAT5e or CAT6 Ethernet cable, eliminating the need for a heavy, expensive copper snake—and the signal degradation that goes with long analog cable runs.You can even remote control the StudioLive 16R’s preamps and phantom power from your networked Series III console. In stage box + monitor mixer mode, the StudioLive 16R not only serves as an excellent networked stage box, it is a full blown monitor mixer with far more processing and mixing power than any mixer in its class—all packed into just one rackspace. (1U). The most powerful rack mixer in its class.When we say the StudioLive® Series III stage boxes and rack mixers are by far the most powerful rackmount digital mixers in their class, that’s no idle claim. The result of ten years of R&D, third-generation StudioLive Series III rack mixers are fully recallable, including remote-controlled XMAX preamps.Yet despite their extensive features, StudioLive Series III rack mixers actually improve upon PreSonus®’ legendary ease of use while letting you customize their workflow and operations in software to fit the way you work. The coveted StudioLive sound is better than ever, including third-generation Fat Channel processing, re-engineered from the ground up, and vintage-style EQs and compressors.Add built-in AVB networking, multitrack recording via USB 2.0 and AVB, onboard stereo recording to SD Card, and a complete suite of software, and you have a mixing and recording powerhouse that’s equally formidable as a stage box/monitor mixer, as a rackmount front-of-house mixer controlled from a touchscreen computer or tablet, and as the heart of your studio. A third-generation Fat Channel.StudioLive Series III rack mixers boast the same third-generation Fat Channel processing found in StudioLive Series III consoles. Delivering digital precision with the heart and soul of analog, the Series III Fat Channel implements a plug-in-style workflow that features vintage-style EQ and compression options on every channel, from classic tube limiters to passive EQs.In addition to channel processing, all StudioLive Series III mixers offer 6-band, fully parametric EQ on all mix outputs. Enjoy extensive, studio-style processing when recording, mixing monitors, or even running the front-of-house system. Technical Specifications Digital Audio and Control ADC Dynamic Range115 dB (A-wtd, 48 kHz)DAC Dynamic Range115 dB (A-wtd, 48 kHz)USB Recording PortUSB 2.0, Type-BNetwork Control PortRJ-45AVB Audio Network PortLocking XLR EthernetInternal Processing32-bit, floating pointSampling Rate48 kHz (44.1 kHz coming soon)A/D/A Bit Depth24Reference Level for 0 dBFS+18 dBuTotal System Latency1.9 ms (local routing, analog in-analog out, all processing active) Mi​crophone Preamplifier Input TypeCombo locking XLR mic-¼” TRS lineFrequency Response to Main Output (at unity gain)20-20 kHz, ±0.5 dBuInput Impedance1 kΩTHD to Main Output

The amazing PMP2000D Powered Mixer packs 2,000 Watts of high-efficiency Class-D output power, while maintaining an incredible power-to-weight ratio. With 14 available input channels, the PMP2000D features 9 of our premium-grade “Invisible” IMP mic preamps with switchable +48 V phantom power, 4 stereo channels, an ultra-high quality. KLARK TEKNIK FX processor with 25 presets including studio-class reverbs, delays, pitch shifter and various multi-effects – and dual 9-band stereo graphic EQs. Top it all off with “Wireless-ready” operation, thanks to our high-quality ULM digital wireless microphones (sold separately), and the PMP2000D is the ideal, easy to use, and ready for anything live sound solution! Features: Ultra-compact 2 x 1000-Watt stereo powered mixerRevolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight9 “Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphonesUltra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)14-channel mixer section features 6 mono and 4 stereo channelsEffective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channelsDual 9-band graphic EQs allow precise frequency correction of monitor and main outputsSelectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation modeAdjustable stereo Aux input for connecting external signal sourcesInternal switch-mode power supply, noise-free audio, superior transient response and very low power consumption3-Year Warranty Program*Designed and engineered in Germany

The amazing PMP500 Powered Mixer packs tremendous power (2 x 250 Watts, selectable as stereo or dual mono), while maintaining an incredible power-to-weight ratio. These mixers employ high-efficiency Class-D technology and a state-of-the-art switch-mode power supply, which significantly reduces weight and heat.  The 12-channel PMP500 features 6 high-quality mic preamps (2 of which also accept our ULM Digital Wireless Microphones, available separately), our “one-knob” compressors, 4 stereo channels, plus 2 additional stereo inputs and 1⁄8" Aux Input for the maximum in versatility. To round out this phenomenal feature set, we added a KLARK TEKNIK 24-bit Multi-FX processor with 32 awesome presets, including studio-class reverbs, delays, pitch shifter and various multi-effects with dual-addressable parameters, Tap function and storable user parameter settings – and a 7-band stereo graphic EQ with our proprietary FBQ Feedback Detection System – for the ultimate in feedback-free performance. Features: Ultra-compact 2 x 250-Watt stereo powered mixerRevolutionary Class-D amplifier technology: enormous power, incredible sonic  performance  and super-light weightUltra-high quality KLARK TEKNIK FX processor with LCD display, dual-parameters, Tap function and storable user parameter settingsStudio-grade compressors with super-easy “one-knob” functionality and control LED for professional vocal and instrumental soundRevolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)12-channel mixer section features 4 mono and 4 stereo channels, 2 additional stereo inputs plus separate Aux input6 high-quality mic preamps with switchable +48 V phantom power for condenser microphonesEffective, extremely musical 3-band EQ, switchable Low cut filter and Clip LEDs on all mono channelsStereo 7-band graphic EQ allows precise frequency correction of monitor or main outputsSelectable stereo (main L/R), double mono (main/monitor) amplifier operationAdjustable Aux input for connecting external signal sourcesStandby switch mutes all mic channels during breaks while background music is provided via Aux inputInternal switch-mode power supply, noise-free audio, superior transient response and very low power consumption3-Year Warranty Program*Designed and engineered in Germany

The new BEHRINGER PMP Powered Mixers (2 x 800-Watt stereo, 1600-Watt bridged mode) produce even more power than their predecessors while maintaining a famously low weight and high efficiency. These mixers employ Class-D technology including a new switch-mode power supply, significantly reducing weight and heat. The 20-channel PMP6000 features 12 built-in XENYX preamps, the 16-channel PMP4000 features 8 built-in XENYX mic preamps, and the 10-Channel PMP1680S features 8 high-quality built-in mic preamps. All three models feature 24-bit FX processors and FBQ Feedback Detection. The PMP Series gives you excellent flexibility to accommodate whatever a performance requires. You get 12 (PMP6000) or 8 (PMP4000 and PMP1680S) channels for mics, guitars and other mono instruments. Stereo channels 13-20 (PMP6000), 9-16 (PMP4000) and 7-10 (PMP1680S) are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable Low cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.A STANDBY switch (PMP6000 and PMP1680S) mutes all mic channels during breaks, preventing the microphones from picking up noise or interference. You can leave all faders untouched while you play a CD via the CD/TAPE inputs. The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.Medium-sized events call for a lightweight (PMP6000: 13.1 kg/ 28.9 lbs; PMP4000: 0.4 kg/22.9 lbs; PMP1680S: 9.9 kg/28.8 lbs), easy-to-use powered mixer. BEHRINGER powered mixers are the most efficient, affordable mixers for the job, and are even suitable for use as pure analog mixers or as pure power amplfiers. With new technological advantages and incredible built-in features, it’s easier than ever to lend exceptional sound quality to all kinds of public performances. The new generation of PMP mixers come equipped with 24-bit FX processors, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you’re pulling double duty as sound engineer and performer, the FX processors features a footswitch jack for remote on/off . Of course, if you have treasured outboard gear you’ve grown attached to, these mixers can integrate them into the mix while leaving out the built-in FX processor.

8 XLR outputs plus 6 additional line in/outputs, a phones connector and a talkback section with XLR mic input. 32 x 32 channel USB 2.0 audio interface, with DAW remote control emulating HUI and Mackie Control. iPad* and iPhone apps for professional remote operation available free of charge—no host PC required. 40-input channel, 25-bus rack-mountable digital mixing console for Studio and Live application. 16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality. 17 Fully automated motorized 100 mm faders allow for instant overview, powerful scene management and DAW control. High-resolution 5" day-viewable Color TFT for easy viewing of workflow components and parameters. Main LCR, 6 matrix buses and all 16 mix buses each featuring inserts, 6-band parametric EQ's and full dynamics processing, plus 8 DCA groups and 6 mute groups. Virtual FX rack featuring 8 true-stereo FX slots include high-end simulations such as Lexicon 480L and PCM70, EMT250 and Quantec QRS etc.

1600-Watt 16-Channel Powered Mixer with Multi-FX Processor and FBQ Feedback Detection SystemUltra-compact 2 x 800-Watt stereo powered mixer (1600-Watt bridged mode)Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weightUltra-compact design at nearly half the weight of conventional powered mixers16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/outputStudio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effectsRevolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal8 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphonesEffective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channelsStereo 7-band graphic EQ allows precise frequency correction of monitor or main outputsVoice Canceller function removes singer’s voice from recordings for karaoke applicationsSelectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation modeBreathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo imageAdjustable stereo CD/Tape input for connecting external signal sourcesMulti-functional stereo Preamp outputs for added flexibilityInternal switch-mode power supply, noise-free audio, superior transient response and very low power consumptionHigh-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany 

1600-Watt 20-Channel Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection SystemUltra-compact 2 x 800-Watt stereo powered mixer (1600 Watt bridged mode)Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weightUltra-compact design at nearly half the weight of conventional powered mixers20-channel mixer section features 12 mono and 4 stereo channels plus separate CD/Tape input/output2 studio-grade 24-bit stereo FX processors with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effectsRevolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal12 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphonesEffective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channelsStereo 7-band graphic EQ allows precise frequency correction of monitor or main outputsVoice Canceller function removes singer’s voice from recordings for karaoke applicationsSelectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation modeSpeaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.Standby switch mutes all mic input channels during breaks while background music is provided via CD/Tape inputBreathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo imageAdjustable stereo 2-Track input for connecting external line sourcesMulti-functional stereo Preamp outputs for added flexibilityInternal switch-mode power supply, noise-free audio, superior transient response and very low power consumptionHigh-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany 

Our StudioLive™ 24.4.2 and 16.4.2 changed the game, offering amazing performance and ease of use for a great price. Now we’ve packed the same audio quality, performance, seamlessly integrated software (including remote control) into a smaller, even more affordable package. In a “footprint” of less than 2 square feet (0.19 m2), the compact, 16-channel StudioLive 16.0.2 offers 8 mono input channels and 4 stereo channels and provides 12 XMAX™ Class A solid-state mic preamps. (Well, okay, it actually has 13 XMAX preamps; the Talkback input has one, too.) But don't let its size fool you; the 16.0.2 is jam-packed with features and processing power, employs the same workflow and easy-to-use mixing-surface design as the bigger StudioLive boards, and sounds every bit as good, with the same high-definition, wide-dynamic-range, digital converters.  8 mono mic/line channel inputs:High-headroom Class A XMAX™ mic preamplifierXLR mic and balanced ¼' line inputs60 mm precision fader4 stereo line channel inputs:High-headroom Class A XMAX™ mic preamplifier (Ch. 9, 11, 13, and 15)XLR mic inputs (Ch. 9, 11, 13, and 15)Balanced ¼' line inputs (Ch. 9-16)Unbalanced RCA line inputs (Ch. 13-16)60 mm precision fader (4 stereo)4 Auxiliary buses (pre/post-fader send)2 Internal FX buses2 stereo 32-bit digital effects processors with customizable reverb and delay presets Fat Channel signal processing on all channels and buses:3-band semi-parametric EQ (individual band on/off)Full-featured compressorStandard downward expanderLimiterPhase reverse (12 mic preamplifiers only)Pan with dedicated 15-LED displayStereo link for input channels and aux busesHigh-pass filter  Computer system requirements:WindowsWindows XP, Vista, Windows 7 (32- and 64-bit)Intel Pentium 4 1.6 GHz processor or AMD Athlon 64 3000+ (Turion) (2.8 GHz or faster recommended)1 GB RAM (2 GB or more recommended)MacintoshMac OS X 10.6 (Snow Leopard) or later (32- and 64-bit)Intel Core 1 Solo 1.5 GHz processor (Intel Core Duo or Intel Xeon processor recommended)1 GB RAM (2 GB or more recommended) Windows and Macintosh SystemsInternet connection recommendedDVD-ROM driveInternal or external 7200 RPM storage drive highly recommended

DL32S brings all the powerful DSP, renowned Onyx+ mic preamps, and Built-Like-A-Tank reliability that the DL Series is known for, in an all-new stagebox form factor with built-in WiFi. Mount it in a rack, set it on a desk, or put it right on the stage. Mix your way. The Mackie DL32S delivers proven mixing power with legendary Onyx+ mic preamps in an all-new Built-Like-A-Tank™, stage-friendly design made to withstand real-world abuse. Get mixing quickly with built-in Wi-Fi and the industry-leading, multi-platform Master Fader™ app. Create stunning multi-track recordings and get playback for a virtual soundcheck via USB I/O. Loaded with channel/output DSP plus 4 FX processors, DL32S gives you the mixing power you need for your best mix ever.Features: 32 Onyx+™ recallable mic preamps10 fully-assignable XLR outputs plus headphone outputIndustry-leading Master Fader control app32x32 USB recordingDitch the snake – Place it anywhere on stage or in a rackComplete control via iOS, Android, Mac, or PCNo set FOH position – mix from anywhereSupports up to 20 separate devices at onceMultiple engineers can work from a single mixerFull I/O routing with A/B sources per channelAssignable oscillator including pink/white noise and sine wavesModern and Vintage options for comp/gate and EQFast navigation with view groups and overviewQuick setup with tons of factory and user-definable presetsAccess Limiting allows flexible customization of the user interface and prevents unwanted adjustments from other usersQuickly access channel processing, signal routing, and a massive suite of great sounding effects with presets to get you startedExport presets, shows and complete system backups via Dropbox, email and moreSpecifications:32 input channels with 4-band PEQ + HPF, gate, compression and RTA/Spectrograph32 stereo-linkable input channels15 output busses with 4-band PEQ + HPF/LPF, 31-band GEQ, comp/limiter, alignment delay and RTA/Spectrograph8 stereo-linkable aux sends6 stereo-linkable subgroupsMain L/R bus6 VCAs and 6 mute groups4 stereo FX processors featuring great built-in FX like reverbs, delays, choruses, flangers, and many more with dedicated sends and returns

18-Input Digital Mixer for iPad/Android Tablets with 16 MIDAS PRO Preamps, Integrated Wifi Module and Multi-Channel USB Audio Interface. The MIDAS M32 completely redefined what is possible from a digital mixer – and thousands of users are enjoying the results. Now that technology has been incorporated into the small but powerful MR18 rack-mountable mixer, which will forever change the way you record and the way you play live music.Χαρακτηριστικά:iPad*/Android* tablet controlled 18-input digital mixer for studio and live application16 award-winning MIDAS PRO microphone preamplifiersBuilt-In Tri-Mode Wifi router for direct operation—no need for external routers18 x 18 channel, bidirectional USB2.0 interfaceDugan*-style Auto-Mixing automatically manages microphone gain sharing4 digital signal processing effects enginesULTRANET connectivity for P-16 Personal Monitoring System*Rack ears and protection bumpers included for flexible rack and onstage applications6 aux and main LR buses with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ6 XLR aux outputs and 2 XLR main outputs plus phones connector40 bit floating point digital signal processingFree iOS, Android and PC/Mac*/Linux* apps available for remote operation via Ethernet, LAN or WiFiMIDI In/Out allows controlling the mixer via MIDI equipment or for use as a USB MIDI interfaceFuture firmware updates, incl. new FX “Plug Ins”, downloadable from midasconsoles.com free of chargeAuto-ranging universal switch-mode power supply 

The DX168 is a rugged, portable expander for adding remote I/O to a dLive S Class or dLive C Class system.Each DX168 features 16 mic preamps with independent Phantom Power LED indicators, plus 8 XLR line outs. Up to 6 DX168 units can be connected to a dLive system – 4 via the MixRack and 2 via the Surface – allowing up to 96 remote inputs and 48 remote outputs in addition to those provided by the MixRack and Surface.The DX168 connects via a single Cat5e cable to the dLive Surface, MixRack or upstream DX168 via a secure EtherCon port. A second locking EtherCon port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX168 for additional remote I/O.Features:16 Mic Preamps on XLR with Phantom Power status LEDs8 XLR Line OutsCompatible with dLive S Class and dLive C Class hardwareUp to 6 DX168 units can be added to a dLive system for 96 inputs / 48 outputsCascade mode allows daisy-chaining of 2 DX168 Expanders for additional I/O (requires firmware 1.60 or higher)Redundant DX connection to dLive S Class hardwareOptional 19-inch rack mount kit availablePlug and Play – no IP addressing requiredCompatible with CAT5e (or higher) cables of up to 100mRubber bumpersCarry handle

In the past decade, the technological revolution has transformed audio into a medium that is produced and delivered in the digital domain. Powerful Digital Audio Workstations have transferred the entire recording studio into a virtual environment where all elements of the studio appear conveniently on a computer screen.But what has been lacking with the modern digital studio, is the same powerful workflow as what was accomplished on tactile mixing consoles. So back in 2012, Slate Media Technology came up with a solution. If the entire production studio was on a computer screen, why not turn the actual computer screen INTO a world class control surface? And the RAVEN series of Multi-Touch consoles was born. Soon the RAVEN would be the preferred control surfaces of major studios, engineers, producers, artists, and educational institutions like Mark Needham, Terry Lewis, Will.i.am, Jimmy Douglass, Snoop Dogg, Steve Aoki, Full Sail University, and SAE.Raven 3.0Raven 3.0 now adds customized multi-touch control of Ableton Live, Cubase/Nuendo, Digital Performer, Logic Pro X, Pro Tools 10-12, and Studio One V3 on Mac as well as Windows compatibility for Pro Tools 10-12, Cubase 8 & 9 and Nuendo 7.Faders 3.0Faders 3.0 are our newest multi-touch faders that allow the most precise control of your DAW faders. By integrating multi-touch 100mm virtual faders directly into each DAW, the engineer has seamless control over mix levels and automation. The new 3.0 algorithm gives the faders a virtual ‘feel’ that allows an intuitive feeling action that is comfortable and even fun to use. And for the most critical automation, FINE FADER mode can quadruple the resolution of the faders so you can get even the most minute moves down in the first pass with ease and perfection.Raven GesturesWe’re proud to announce the next evolution of the RAVEN Control software called GESTURES. As its name implies, GESTURES allows classic multi touch gestures to control important elements of the DAW such as opening and closing plugins, muting and unmuting tracks, zooming in and out, and more.Features:8 Stereo inputs3 Speaker Sources with LFE Enable per speaker pair.2 Stereo Cue Outputs to feed Headphone Amps.Talk Back system with built in mic and “Talkback Presets” to independently send talkback to specified outputs.CAL Mode to pre-set a reference monitoring level.LFE Output with LPF & Crossover Point, Phase and Level.DB25 Connections for Inputs and OutputsDB9 Connections for VU Aux and Talkback AuxPowered USB 2.0 inputs x2 

The Soundcraft Vi1000 digital mixing console represents the culmination of the groundbreaking achievements and rich feature set offered by Soundcraft's acclaimed Vi Series—now in a more compact form factor.The reduced footprint of the Vi1000 makes it ideal for smaller touring projects, rental companies, corporate AV applications, as well as music venue, theater and HOW installations in search of a versatile digital mixer. Among its many features, the Vi1000 incorporates Vistonics II 'knobs-on-glass' functionality, making it easy to see and access the power and versatility of the mixing environment; along with Soundcraft Faderglow™ colour coding, which illuminates the fader slots according to function using clearly defined colours.Offering pristine audio quality, a wealth of functionality, an intuitive user interface for streamlined operation, and the roadworthy reliability that Soundcraft's Vi Series consoles are known for, the new Vi1000 delivers space saving, world-class audio mixing capability.Features:96 input channels with 24 mono/stereo mix busses, plus LRC master bussesVistonics II proprietary ‘knobs-on-glass’ functionality; key to the console’s streamlined, intuitiveoperational interface and widely praised as the easiest-to-use digital console on the marketSpiderCore™ integrated DSP engine ensures superior audio performanceSoundcraft Faderglow color coding illuminates the fader slots according to functionIntegrated Dante™ interface facilitates instant connection to industry standard Dante audionetworksTwo double-slot expansion slots for Stagebox connection or option card installationBuilt-in Lexicon world-class reverb, delay, and pitch effects from the industry’s leading brandOnboard BSS DPR901ii dynamic EQ digitally modelled after the original, industry-standard BSSanalog unitIntegrated microphone monitoring for AKG, Shure®, and Sennheiser wireless systemsIncluded vMIX automatic microphone mixing for two groups of up to 16 mics in conference ortheatrical applicationsProven electronic and mechanical design delivers the performance and reliability Vi Seriesconsoles are known for 

Digital mixing has revolutionized virtually everything in the live-entertainment production workflow. Now we’ve come up with the perfect solution for connecting the onstage talent with your Front of House (FOH) console, and the rest of the world – the ultra-cool and ultra-affordable SD8 Stage Box! The SD8 provides 8 MIDAS -designed remote-controllable mic preamps, 8 balanced analog XLR returns at the stage end, plus an integrated 2-port ULTRANET distribution hub for direct connection to our P16-M personal monitor mixers – without any additional hardware required.Plus the SD8 is extremely compact and comes with rugged protective bumpers, so you can toss them directly on stage wherever you need them. The best part – all it takes is a single shielded CAT5e cable per stage box (up to 330 ft / 100 m length). And If you need more inputs, or just want to keep your cable runs short and tidy, putting an SD8 at stage front and another behind the drum riser gives you an additional 8 inputs for drum and guitar/ bass amp mic’ing.Features:8 MIDAS-designed, fully programmable mic preamps for audiophile sound quality8 analog, servo-balanced XLR outputsAES50 network ports featuring KLARK TEKNIK’s SuperMAC networking capability for ultra-low jitter and latency2-port ULTRANET distribution hub for powered connection of 2 BEHRINGER P16-M personal monitoring mixersDigital audio and control connectivity for TURBOSOUND speaker systems with ULTRANET networking capabilityRack ears and protection bumpers included for installed and mobile applicationsDual AES50 ports for cascading multiple units—no merger or router requiredRemote operation via shielded CAT5e cable up to 330 ft / 100 m lengthUSB connector for system updates via PCUltra-compact and roadworthy, all-steel chassisDesigned and engineered in German​

The revolutionary X18 is a powerhouse 18 input/12 bus digital mixer that also serves as the launch pad for your favorite computer tablet – including iPad and Android tablets. It is ideally suited for both live and studio applications, thanks to its 16 award-winning MIDAS-designed mic preamps, convenient integrated Wifi module for wireless control – and a lightning-fast, bidirectional USB Audio Interface. Features:iPad*/Android* tablet controlled 18-input digital mixer for studio and live applications16 award-winning MIDAS-designed, fully programmable mic preamps for audiophile sound qualityBuilt-In Tri-Mode Wifi router for direct operation—no need for external routers18 x 18 channel, bidirectional USB interface for direct recording on iPad etc.Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharingAward-winning X32 effects rack featuring 4 stereo FX slots including high-end simulations such as Lexicon 480L* and PCM70*, EMT250* and Quantec QRS* etc.100-band Real Time Analyzer (RTA) for all channel and bus EQ'sULTRANET connectivity for BEHRINGER's P-16 Personal Monitoring System*Ultra-wide tray suitable for almost all tablets, iPads and even mini notebooks6 aux and main LR buses with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ6 TRS aux outputs and 2 XLR main outputs plus stereo RCA output and phones connectors40-Bit floating-point DSP features "unlimited" dynamic range with no internal overload and near-zero overall latencyFree iOS, Android and PC/Mac*/Linux* apps available for remote operation via Ethernet, LAN or WiFiMIDI In/Out allows controlling the mixer via MIDI equipment (incl. Mackie Control* protocol) or for use as a USB MIDI interface (future firmware)Future firmware updates, incl. new FX “Plug Ins”, downloadable from behringer.com free of chargeInternal switch-mode power supply for noise-free audio and low power consumptionDesigned and engineered in Germany

The POWERPLAY P16 system is the easy, affordable way to give live or recording musicians/vocalists what they really want – “more me!” When used in conjunction with your X32 Digital Mixing Console, P16-I Input Module or S16 Digital Snake, the P16-D distributor can provide 8 additional ULTRANET RJ-45 outputs, giving you the power to expand your existing P16-M system (up to 48 stations). In addition to sending 16 channels of digital audio to the P16-Mmixers, the P16-D also supplies operating power, totally eliminating the need for power adapters – and creating a much more streamlined stage or studio environment.Fast and easy to set up, a basic system can be installed and configured in a matter of minutes – and the system can be expanded to adapt to changing needs. The POWERPLAY P16 Personal Monitoring System puts total control of the monitor mix into the artist’s hands, and when they can hear exactly what they want and need to hear – their best performance is unleashed!Features:Distribution Hub for P16-I for system expansion1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45)Provides bus-power and 16-channel signal transmission for all 8 outputsUp to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal MixersStatus LED indicators for RJ-45 input and 8 RJ-45 outputsInternal autorange power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savingDesigned and engineered in Germany​

16-Input Digital Mixer for iPad/Android Tablets with 8 Programmable MIDAS Preamps, 8 Line Inputs, Integrated Wifi Module and USB Stereo Recorder.Features:iPad*/Android* tablet controlled 16-input digital mixer for studio and live application8 award-winning MIDAS-designed, fully programmable mic preamps for audiophile sound qualityBuilt-In Tri-Mode Wifi router for direct operation—no need for external routersRevolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharingUSB connector for uncompressed stereo WAV recording and playbackAward-winning X32 effects rack featuring 4 stereo FX slots including high-end simulations such as Lexicon 480L* and PCM70*, EMT250* and Quantec QRS* etc.100-band Real Time Analyzer (RTA) for all channel and bus EQ'sRack ears and protection bumpers included for flexible rack and onstage applications6 aux buses and main LR with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ4 XLR aux outputs and 2 XLR main outputs plus phones connector40-Bit floating-point DSP features "unlimited" dynamic range with no internal overload and near-zero overall latencyFree iOS, Android and PC/Mac*/Linux* apps available for remote operation via Ethernet, LAN or WiFiMIDI In/Out allows controlling the mixer via MIDI equipment (incl. Mackie Control* protocol)Future firmware updates, incl. new FX “Plug Ins”, downloadable from behringer.com free of chargeInternal switch-mode power supply for noise-free audio and low power consumption3-Year Warranty Program*Conceived and designed by BEHRINGER Germany 

The S32 provides 32 MIDAS-designed remote-controllable mic preamps, plus 16 balanced analog XLR returns at the stage end – and all it takes is a single Cat 5e cable (up to 328 ft / 100 m). While KLARK TEKNIK, the industry-leader in high-end digital audio processing, invented the AES50 SuperMAC technology that made it all possible – our superb scale of production makes the S32 so very affordable.Features:32 MIDAS-designed, fully programmable mic preamps for audiophile sound quality16 analog, servo-balanced XLR outputsAES50 network ports featuring KLARK TEKNIK’s SuperMAC networking capability for ultra-low jitter and latencyULTRANET Connectivity for BEHRINGER's P16 personal monitoring system for in-ear applicationsDigital audio and control connectivity for TURBOSOUND speaker systems with ULTRANET networking capabilityAutomatic AES50 stage-split mode when connected between BEHRINGER X32 Series FOH and monitor consolesDual AES50 ports for cascading additional S16, SD16 or SD8 stageboxes—no merger or router required2 AES-3 ports (AES/EBU), for directly connecting PA system controllers with digital inputsDual ADAT outputs providing 16-channel digital output on two optical TOSLINK* connectorsMute All function for quietly patching any inputs on stageMIDI In/Out for bi-directional communication between BEHRINGER X32 Series console and on-stage MIDI devicesRemote operation via shielded CAT5e cable up to 330 ft / 100 m lengthUSB connector for system updates via PC"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving"Built like a tank" yet compact, all-steel 3U rack-mount chassisDesigned and engineered in Germany

Digital mixing has revolutionized virtually everything in the live- entertainment production workflow. Now we’ve come up with the perfect solution for connecting the onstage talent with your Front of House (FOH) console, and the rest of the world – the ultra-cool and ultra- affordable SD16 Stage Box! The SD16 provides 16 MIDAS-designed remote- controllable mic preamps, 8 balanced analog XLR returns at the stage end, plus an integrated 4-port ULTRANET distribution hub for direct connection to our P16-M personal monitor mixers – without any additional hardware required.Plus, the SD16 is extremely compact and comes with rugged protective bumpers, so you can toss them directly on stage wherever you need them. The best part – all it takes is a single shielded CAT5e cable per stage box (up to 330 ft / 100 m length). And If you need more inputs, or just want to keep your cable runs short and tidy, putting an SD16 at stage front and another behind the drum riser gives you an additional 16 inputs for drum and guitar/bass amp mic’ing. When used as part of a complete X32 system, as many as three SD16 Stage Boxes can be cascaded via the built-in AES50 ports to provide up to 48 bidirectional inputs and 24 balanced XLR outputs. An onboard ULTRANET distribution hub provides power and 16 channels of audio to 4 BEHRINGER POWERPLAY P16-M personal monitor mixers per SD16, all via inexpensive shielded CAT5e cabling – and without any additional hardware. Two of the programmable inputs are also compatible with Hi-Z sources, so you can connect keyboards, acoustic and bass guitars, etc., with no DI box required. The SD16 also features a USB port for fast and easy system updates via your PC.Features:16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality8 analog, servo-balanced XLR outputsAES50 network ports featuring KLARK TEKNIK’s SuperMAC networking capability for ultra-low jitter and latency4-port ULTRANET distribution hub for powered connection of 4 BEHRINGER P16-M personal monitoring mixersDigital audio and control connectivity for TURBOSOUND speaker systems with ULTRANET networking capabilityRack ears and protection bumpers included for installed and mobile applicationsDual AES50 ports for cascading multiple units—no merger or router requiredRemote operation via shielded CAT5e cable up to 330 ft / 100 m lengthUSB connector for system updates via PCUltra-compact and roadworthy, all-steel chassisDesigned and engineered in Germany

The Soundcraft Ui24R is a complete, rack-mountable, digital mixing and multi-track recording system that delivers flexible I/O, pristine sound quality, intuitive wireless control, and roadworthy reliability—all in a streamlined design. The system can double as a stagebox and can be controlled by up to 10 devices via Ethernet or built-in dual-band Wi-Fi, making it possible to control mixing and multi-track recording wirelessly from anywhere in the venue. Renowned Lexicon, dbx and DigiTech signal processing ensures pristine sound, while 20 Studer-designed microphone preamps deliver more professional inputs than any other mixer in its class. The compact, rack-mounted Ui24R is also compatible with the new HARMAN Connected PA system, and offers unprecedented control, versatility and power at an incredible value. From the stage to the studio, Soundcraft Ui24R is the ultimate system for artists, venues and engineers who need to save space and deliver superior sound. Ui24R brings together industry-leading HARMAN technologies to deliver unprecedented power and mission-critical stability. Renowned Studer preamps deliver rich sound for live performance and multi-track recording, while iconic Lexicon reverbs, choruses, delays, and dbx compression offer polished results for vocals, acoustic guitar and more. dbx AFS2 automatic feedback suppression is available on all monitor outputs, providing an excellent live experience. Plus, DigiTech guitar amp modeling brings a host of effects to any performance, particularly when low stage volume is desired.Features:Renowned Soundcraft quality and performanceBuilt-in dual-band Wi-Fi eliminates the need for a router to provides a reliable connection to up to 10 mobile devices in mission critical situationsControl Ui24R from iOS, Android, Windows, Mac OS and Linux browsers without installing additional appsRecord and mix with the warmth of 20 professional-quality Studer-designed preampsdbx compression and iconic Lexicon reverb and delay processing2 channels of DigiTech guitar amp modelingDual-path, redundant multi-track recording of all 24 inputs to USB drive and connected Mac/PC24 simultaneous inputs (10 combo ¼” TRS/XLR, 10 XLR, 2 line level, 2 digital)4-band parametric EQ, high-pass filter, compressor, de-esser, and noise gate on input channels31-band graphic EQ, noise gate, compressor, and dbx® AFS2 Automatic Feedback Suppression on all outputsReal-time frequency analyzer (RTA) on inputs and outputsCompatible with Mac/PC DAWs and other music softwareCompatible with Harman Connected PA application and system for easier setup and control4U rackmount design

Performance and natural sound supported by sonically superb internal processing capabilities, an operation that easily adapts to the demands of just about any working environment. Built-in Dante networking that facilitates flexible system configuration, have now been condensed and concentrated into the compact QL series digital mixing consoles. QL series consoles offer all-in-one mixing, processing, and routing capability for small to medium scale live sound, corporate speech events, installations, and much more.The Yamaha sound begins with reproduction that is faithful to the source. QL series consoles feature circuitry and components that have been designed and selected with the utmost care, achieving outstanding audio purity from input to output. With that solid sonic foundation, it becomes possible to take full advantage of built-in premium internal processors such as the Portico 5033/5043 created in cooperation with Rupert Neve, to shape and create as required. For a wide range of speech applications, built-in automatic mixing functionality from Dan Dugan Sound Design provides optimum channel balance while allowing the operator to concentrate fully on optimizing the overall sound.  Specifications:Type: DigitalChannels: 32Inputs - Mic Preamps: 16 x XLRPhantom Power: 16 x ChannelsInputs - Digital: 2 x EtherCon Cat5 (Dante Primary, Secondary)Outputs - Digital: 1 x XLR (AES/EBU), 2 x EtherCon Cat5 (Dante Primary, Secondary)Outputs - Main: 8 x XLR (Omni)Channel Inserts: YesBusses/Groups: 16 mix, 8 matrixData I/O: Network RJ-45, GPIUSB: 1 x Type AMIDI I/O: In, OutWord Clock: In, OutI/O Expansion Slots: 2 x Slots (mini-YGDAI)Headphones: 1 x 1/4"Faders: 18 x 100mm ThrowEQ Bands: 4-band ParametricEffects: YesTalkback: YesHeight: 272mmDepth: 562mmWidth: 468mmWeight: 14.7 Kg  

Yamaha TF5 -High input capacity and fader count makes this powerful console ideal for larger applications.Yamaha has always made it a mission to stay in touch with the needs of sound engineers worldwide. The outcome is evident in the success of the recent CL and QL series digital mixing consoles, and the flagship RIVAGE PM10. The key to success has always been in supporting the user’s creativity. Creativity is most effective when unrestricted, and now Yamaha has created a new digital mixing console that gives the user's intuition even freer rein. TouchFlow Operation™ introduced in the TF series consoles allows the user to respond to the music and artists on stage with unprecedented speed and freedom, taking live sound reinforcement to a new level of refinement. With the TouchFlow Operation interface optimized for touch panel control, experienced engineers, as well as newcomers to the field, will find it easier than ever to achieve the ideal mix. Recallable D-PRE™ preamplifiers support sound quality that will satisfy the most discerning professional ears, while advanced live recording features and seamless operation with high-performance I/O racks give these compact digital mixers capabilities that make them outstanding choices for a wide range of applications. Experience the intuitive control and creative freedom that a truly evolved digital console can provide.Features:33 motor faders (32 channels + 1 master)48 input mixing channels (40 mono + 2 stereo + 2 return)20 Aux (8 mono + 6 stereo) + Stereo + Sub buses8 DCA groups with Roll-out32 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs16 analog XLR outputs34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device8 Effects and 10 GEQ1 expansion slot for NY64-D audio interface card

A remarkable new standard for performance in a compact digital mixer, the TouchMix-30 Pro has the features and functionality that will satisfy the most demanding professional while also providing an intuitive workflow that delivers great results, quickly and easily, to users at every level of experience. Perfect for production professionals, musicians and bands as well as live performance venues, its 32 mixing channels (24 Mic/Line, 6 Line, Stereo USB) and 16 outputs offer tremendous signal management flexibility for a wide range of applications.Features:Large (10-inch) multi-touch touchscreen offers more on-screen information while also providing greater hands-on controlAnti-Feedback and Room Tuning Wizards simplify complex equalization tasksTwo real-time analyzers (RTA) provide instantaneous analysis of channel tonal balance and room responseFunction easily duplicates mixes, channels, EQ, dynamics and more.Touch-and-route patch matrix for easy “multing” and rearrangement of inputsEight sub-groups with 6-band full parametric EQ, variable high-pass and low-pass filters and limiter may be linked for stereo32-channel direct-to-hard drive record/playback - capture and recall performances without the need for an external computer32-Channel DAW interface with Apple® computers allows for bidirectional I/O with popular workstation softwareMP3 playback direct from USB24 class-A microphone preamps deliver pristine, studio-quality audioOver 120 live instrument, microphone and other audio source presets created in live environments provide mix-ready channel settingsAll outputs feature 1/3 octave graphic equalization and 6-band parametric EQ plus limiters, delay and 12-band notch filters14 mono mixes may be paired for stereo while two pairs of Auxes can drive wired in-ear monitors (IEM) directlySix stereo effects processors plus pitch-correct offer studio-grade signal enhancements, without sacrificing Auxes or additional channels​​

Allen & Heath has launched new Chrome Editions of its Qu series compact digital mixers to mark the launch of Qu v1.8 Chrome firmware in mid-October, which adds major new features including Automatic Mic Mixing, a Spectrogram and additional monitor mixes.Chrome Edition Qu-16 mixers all feature the same high contrast metallic finish rotary controls and fader caps as the premium GLD Chrome series, providing optimal visibility in low lighting scenarios and enhanced tactile control.A new Spectrogram tool provides a fast, visual means of hunting down and dealing with problem frequencies, helping to eliminate feedback and tame difficult room acoustics.The Qu-Pad app receives further enhancements with the inclusion of new controls, views and functions, such as remote control over AMM settings. Qu-Pad is one of a series of control apps which also includes Qu-You for personal monitoring.Features:19” Rack Mountable16 Mono Mic/Line Inputs (TRS + XLR)Recallable AnaLOGIQTM Preamps3 Stereo Inputs (TRS)12 Mix Outputs (XLR)7 Monitor Mixes (4 mono + 3 stereo)4 FX Engines2 dedicated FX Sends / Returns4 Mute Groups4 DCA GroupsAES Digital Out24×22 USB Audio InterfacedSNAKETM Remote Audio Port17 Motor Faders800×480 Touchscreen4 Soft Keys

Allen & Heath has launched new Chrome Editions of its Qu series compact digital mixers to mark the launch of Qu v1.8 Chrome firmware in mid-October, which adds major new features including Automatic Mic Mixing, a Spectrogram and additional monitor mixes.Chrome Edition Qu-24 mixers all feature the same high contrast metallic finish rotary controls and fader caps as the premium GLD Chrome series, providing optimal visibility in low lighting scenarios and enhanced tactile control.A new Spectrogram tool provides a fast, visual means of hunting down and dealing with problem frequencies, helping to eliminate feedback and tame difficult room acoustics.The Qu-Pad app receives further enhancements with the inclusion of new controls, views and functions, such as remote control over AMM settings. Qu-Pad is one of a series of control apps which also includes Qu-You for personal monitoring.Features:5″ colour touchscreen24 Mono Inputs (TRS + XLR)25 Motor Faders3 Stereo Inputs (TRS)4 Stereo FX with dedicated Sends and Returns20 Mix Outputs (XLR)2 Stereo Groups2 Stereo Matrix Outs10 SoftKeysAutomatic Mic Mixer 

Qu-SB is an ultra-compact digital mixer which frees you to mix from anywhere in the venue and provides a smart, portable solution for performing bands and artists.Qu-SB is portable enough to carry under one arm and comes loaded with our highly acclaimed suite of FX emulations and dynamics, making it a smart replacement for an old analogue mixer and a rack full of outboard FX.The companion Qu-Pad app is a slick, intuitive interface for setting up the show and mixing live from your iPad, and there’s also a customisable Qu-Control app that lets you choose just a few essential controls that you really need in front of you for easy access during the show.Couple these with the Qu-You personal monitoring app for Android / iOS and Qu-SB is a fantastic choice if you’re mixing your own monitors and want to get the same great sound wherever you play.With all of your settings saved and ready, plus multi-track recording and playback of previous shows for virtual soundchecks, you’ll be all set to play in record time.On top of the 18 on board inputs and 14 outputs, Qu-SB has you future-proofed with plug n’ play expansion up to 38 inputs / 24 outputs via a family of remote AudioRacks.Features:16 local Mono Mic/Line Inputs (TRS + XLR)Recallable AnaLOGIQTM Preamps1 Stereo Input (TRS)12 local Mix Outputs (XLR)1 Stereo Output (TRS)Expandable up to 32 input, 24 out using dSNAKE AudioRackUp to 11 Monitor Mixes (4 mono + 7 stereo)4 Stereo Groups (switchable to Mix mode)4 FX Engines4 dedicated FX Sends / Returns4 Mute Groups4 DCA GroupsAES Digital Out32×32 USB Audio InterfaceQu-Drive Multitrack Recording / Playback direct to USB device 

AB168 is a portable AudioRack, providing 16 XLR inputs and 8 XLR outputs when connected to a GLD-80 or GLD-112 mixer, or to an AR2412 AudioRack.Featuring 16 mic preamps with Phantom Power indicators and 8 XLR line outs, AB168 runs on Allen & Heath’s proprietary dSNAKE protocol.The AB168 unit connects over a single Cat5 cable to the GLD mixer or to an AR2412 AudioRack via a secure dSNAKE EtherCon port. A second EtherCon port is provided for daisy-chaining to another AB168 box or connection of a ME personal mixing system. AB168 auto updates its firmware to synchronise with the GLD system.The rack’s rugged design, including rubber bumpers, renders it highly roadworthy and allows it to be placed on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, AB168 is also designed for maximum convenience and portability.Features:16 Mic Preamps on XLRPhantom Power LED per Input8 XLR Line OutsdSNAKE Connection with locking Ethercon portAdditional locking Ethercon port for daisy chaining / ME personal mixing systemRubber bumpersCarry handleOptional rack mount kit available 

The Ui Series mixers feature cross-platform compatibility with iOS, Android, Windows, Mac OS, and Linux devices, and can use up to 10 control devices simultaneously. In addition, the Ui12 and Ui16 each feature built-in HARMAN signal processing from dbx, DigiTech and Lexicon, including dbx AFS2, DigiTech Amp Modeling, and more. Both models feature fully recallable and remote-controlled mic gain and phantom power, along with 4-band parametric EQ, high-pass filter, compressor, de-esser and noise gate on input channels. Both mixers offer 31-band graphic EQ, noise gate and compressor on all outputs, plus real-time frequency analyser (RTA) on inputs and outputs. Built in are three dedicated Lexicon FX busses: Reverb, Delay and Chorus. In addition, mixer controls include Subgroups, Mute groups and View groups, among others. The Ui Series mixers feature full Show/Snapshot recallability with channel recall safes. while security lockout features allow customization of device access to only specific functions and mixes if needed. Both mixers also offer independent network interfaces on board for simultaneous control by Wi-Fi and Ethernet, plus a floor-ready rugged chassis for live applications. The Ui16 boasts eight XLR combo mic/line inputs, four XLR mic inputs, two channels of Hi- Z/instrument inputs, as well as a stereo RCA line input. A 2-channel USB media player is included, along with four balanced XLR Aux outputs, two quarter-inch headphone outputs with level control, plus balanced stereo XLR and quarter-inch main outputs. Two-channel USB audio playback is compatible with MP3, WAV and AIFF formats, and 2-channel USB Record direct-to-memory devices functionality is possible as well. The Ui16 also has an HDMI display connection output.Features:Tablet/PC/Smartphone Controlled Digital MixerIntegrated Wi-FiCross-platform compatibility with iOS, Android, Windows, Mac OS, and Linux devicesUse up to 10 control devices (tablets, phones, PCs) simultaneouslyLegendary Harman Signal Processing from dbx®, Digitech®, and Lexicon®Fully recallable and remote-controlled mic preamps4-band Parametric EQ, High-Pass Filter, Compressor, De-esser and Noise Gate on input channels31-band Graphic EQ, Noise Gate and Compressor on all outputsReal-Time Frequency Analyser (RTA) on inputs and outputs3 dedicated Lexicon® FX effects processors: Reverb, Delay and ChorusSubgroups, Mute Groups, View Groups, and more mixer controlsShow/Snapshot recall with channel safes and security lockout2-channel USB audio playback and recordingPassword-protected Access limitation systemSync ID (multiple browser windows staying in channel Sync)

The Allen & Heath GLD-AR2412 is the Main AudioRack for the company's GLD digital mixing system. The GLD-AR2412 includes 24 XLR inputs and 12 XLR outputs and connects to the GLD-80 digital mixer via inexpensive and readily available Cat 5 cable running Allen & Heath's dSNAKE protocol, allowing the GLD-AR2412 to be positioned up to 400' from the GLD-80.dSNAKE provides control to the remote mic preamps in the GLD-AR2412; all are scene recallable. For larger configurations, a GLD-AR84 Expander AudioRack may be connected to the GLD-AR2412 to add an additional eight XLR inputs and 4 XLR outputs.Specifications:24 XLR Mic / Line Inputs12 XLR Line OutputsCat 5 In/OutputsAviom Monitor OutputsDimensions 483 x 220 x 137mm (19" 3U)Weight 5 Kg​

The Allen & Heath GLD-AR84 is an Expander AudioRack for the company's GLD digital mixing system. The AR84 adds 8 XLR inputs and 4 XLR outputs to the GLD system. You can add up to two GLD-AR84s to your system, connected to the GLD-AR2412 main AudioRack (and/or directly to your GLD-80 mixer). You get easy connectivity with inexpensive and readily available Cat 5 cable running Allen & Heath's dSNAKE protocol. In your live setup, you can position the AR2412 up to 400' from the GLD-80. This lets you place your AudioRacks onstage, for instance, keeping your analog cable runs short and running Cat 5 to FOH. dSNAKE gives you control over the remote preamp, with all mic pres being scene-recallable. Expand your GLD digital mixing system with the Allen & Heath GLD-AR84.Specifications:8 XLR Mic / Line Inputs4 XLR Line OutputsCat 5 InDimensions 483 x 220 x 48mm (19" 1U)Weight 3 Kg​cable

QSC TouchMix compact digital mixers are designed for musicians, production professionals and live performance venues that need the power and capability of a large “concert” mixing console in a compact, affordable and easy to use form. TouchMix-8 and TouchMix-16 mixers have the functionality to satisfy demanding professionals combined with a range of features and functions that help the less experienced user achieve quality results.The QSC TouchMix Series represents a breakthrough in innovation and digital mixer design - the result of a remarkable collaboration between QSC and industry icons Greg Mackie and Peter Watts (M&W Pro Audio Ltd.) TouchMix not only resets the bar for performance and value, but also redefines the user experience for both professionals and novices alike.Features:Approximately the size and weight of a small laptop computer.Operation via internal color touch-screen and rotary dial, mobile device or both simultaneously.USB Wi-Fi adapter included. No additional network hardware required for remote control.Includes padded carrying case for protection and easy transport.​Eight DCA and eight mute groups.Assign / Un-assign Input to Main Mix*Programmable User-Buttons.*Save your own channel presets and complete mixer scenes to internal memory or USB device.Capturing live performance to multi-track has never been easier. Record 14 tracks (all inputs plus a stereo mix) directly to USB hard-drive. Mix down on TouchMix or import into your favorite DAW.Security Lockout ModesUSB Wi-Fi interface and carrying case are included.

The revolutionary XR18 is a powerhouse 18 input/12 bus portable/rack-mountable mixer for iPad and Android tablets, and is ideally suited for both live and studio applications, thanks to its 16 award-winning MIDAS-designed mic preamps, convenient integrated Wi-Fi module for wireless control, plus USB connectivity for file storage, system updates and uncompressed stereo recordings via the USB Stereo Recorder. There are also rack ears and protective bumpers included for added flexibility in your studio and stage applications. The freedom to move around and manipulate all parameters of your mix with the free iOS and PC apps lets you dial in the perfect sound from anywhere in the venue – or the tracking room.Designed for the ultimate in mobility, the XR18 comes with an integrated Wi-Fi module for direct control of your mixer’s functions – without the need to setup and configure an external router. The XR18 gives you the freedom to focus on your mix, while allowing you to move about the venue to experience what every part of the audience is hearing. Plus you can adjust live monitor wedges from the artist’s perspective – or better yet, let them mix their own IEMs and floor monitors via their own tablets.Specifications:FormatAnalog/digital: DigitalAnalog inputsTotal: 18Mic preamps: 16XLR/TRS combo jacks: 161/4" only jacks: 2Phantom power: Yes (+48V)Analog outputsMain XLR out: 2Aux XLR: 6Headphone: 1Onboard effectsCompression: YesReverb: YesDelay: YesChorus/flange: YesEqualizationType: VirtualBands per channel: 4Treble: YesSweep high midrange: YesSweep midrange: YesLow cut: YesMaster graphic: 31-bandInserts/busesBuses: 12Sub groups: 2ConnectivityUSB: YesWiFi: YesMIDI: Yes

The Ui12 from Soundcraft is a 12-input remote-controlled, fully recallable digital mixing system, housed in a compact, road-rugged stagebox format. With built-in Wi-Fi, cross-platform compatibility, and the ability to be controlled by any connected device via standard web browser, the Ui12 offers a full-featured, flexible remote mixing solution for a wide variety of live sound reinforcement applications. The Ui12 features cross-platform compatibility with iOS, Android, Windows, Mac OS, and Linux devices, and can use up to 10 control devices simultaneously. In addition, the mixer features signal processing from dbx, DigiTech and Lexicon, including dbx AFS2 feedback suppression, DigiTech amp modeling, and more. It has fully recallable and remote-controlled mic gain and phantom power, along with 4-band parametric EQ, high-pass filter, compressor, de-esser, and noise gate on all input channels. The mixer also features 31-band graphic EQ, noise gate, and compressor on all outputs, plus real-time frequency analyzer (RTA) on all inputs and outputs. Features:Tablet/PC/smartphone controlled digital mixerCross-platform compatibility with iOS, Android, Windows, Mac OS, and Linux devicesIndependent network interfaces on board for simultaneous control by Wi-Fi and EthernetFloor-ready, rugged chassis for live applicationsIntegrated Wi-FiUse up to 10 control devices (tablets, phones, PCs) simultaneouslySignal processing from dbx, DigiTech, and LexiconFully recallable and remote-controlled mic preamps4-band parametric EQ, high-pass filter, compressor, de-esser and noise gate on input channels31-band graphic EQ, noise gate and compressor on all outputsReal-time frequency analyzer (RTA) on inputs and outputs3 dedicated Lexicon FX effects processors: reverb, delay and chorusSubgroups, Mute Groups, View Groups, and more mixer controlsShow/Snapshot recall with channel safes and security lockoutIncludes Ableton Live Lite2-channel USB audio playback

Qu-Pac takes the power and legendary quality of the Qu family and shrinks it into an uber-compact desk or rack mount format. Qu-Pac frees you to mix from your iPad, but the full functions of the mixer can also be accessed from the front panel and touchscreen.With custom settings and Cat5 expansion up to 38 inputs, Qu-Pac provides a scalable, failsafe solution for hardworking bands, schools, hotels, corporate events, live music bars, conferences, personal mixing and many more scenarios requiring a pro mixing solution in a tiny footprint. User permissions and the customizable Qu-Control screen make Qu-Pac convenient and safe for day-to-day use by non-technical staff.Add the Qu-Pad iPad app to your Qu setup and you’re free to adjust the monitors on stage, roam around the venue whilst tweaking the PA, and then mix the show from the heart of the audience. Qu-Pad connects to the mixer over Wi-Fi* and gives instant access to all live mixing parameters and settings.Qu-Pac’s 5 inch, 800 x 480, sixteen million colour Touchscreen and its dedicated data encoder form the heart of the Qu interface, providing super-fast, easy access to all settings. The user-friendly interface has been designed with clarity in mind. Dedicated keys and screen tabs quickly guide you to meter and RTA views, FX racks, channel processing, USB audio control, scenes, setup menus and much more.Specifications:16 acclaimed AnaLOGIQT recallable preamps16 on-board Mic / Line Inputs (XLR / TRS)Expandable up to 38 inputs via dSNAKETM3 Stereo Inputs (TRS)32 Mono + 3 Stereo Input Channels12 on-board Mix Outputs (XLR)4 Stereo Groups2 Stereo Matrix OutsAES Digital Out4 DCA Groups4 Mute GroupsQu-Pad iPad App for all live mixing controlsQu-You iPhone App for personal monitoringQu-Drive direct Multitrack Recording / Playback on USB drives15 Soft Keys16 Custom Select keysQu-Control custom screen to suit application4 FX Engines4 FX Sends / Returns32×32 USB Audio Interface5” TouchscreeniLive FX LibraryCompatible with ME Personal Mixing SystemTrim, polarity, HPF, gate, insert / ducker, 4-band PEQ, compressor and delay on all InputsInsert, 4-band PEQ, 1/3 octave GEQ, compressor and delay on all Mix outputsBuilt-in Signal GeneratorRTA with Peak Band indication

12-Input Digital Mixer for iPad/Android Tablets with 4 Programmable MIDAS Preamps, 8 Line Inputs, Integrated Wifi Module and USB Stereo Recorder. iPad*/Android* tablet controlled 12-input digital mixer for studio and live application.Built-In Tri-Mode Wifi router for direct operation—no need for external routers. Award-winning X32 effects rack featuring 4 stereo FX slots. 2 aux and main LR buses with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ. 2 TRS aux outputs and 2 XLR main outputs plus phones connector. MIDI In/Out allows controlling the mixer via MIDI equipment. Specifications:Input Mic: 4Effect: YesChannels: 12Console Type: DigitalConsole Layout: VerticalEqualizer: YesAux: 2Rack Mount Possibility: YesUSB Flash: YesApplication Portable: PASeries: X AIR seriesWarranty: 1 Year

You don’t need a large, complicated mixer to achieve pro-quality live sound, and you don’t need to compromise on power for a simple design that’s easy for anyone to use. With the QSC TouchMix series of digital live sound mixers, you’ve got serious connectivity, routing, and effects processing in an intuitive design. QSC’s TouchMix is versatile enough to manage a wide range of medium- and small-format mixing tasks, while its touchscreen interface and built-in user help make it easy for almost anyone to use. If your goal is to have outstanding sound quality and extensive mix capabilities in the smallest form factor possible, you’ll be impressed with the QSC TouchMix series.Powerful mixers with generous I/O for their compact sizeEasily access all mixing features and processors with the large touchscreen displayEffortless setup thanks to the built-in Wizards, info, and preset librariesPowered aux sends can drive in-ear monitors directlyMix anywhere in the room, thanks to remote control via mobile devices (Wi-Fi interface included)Specifications:20 total inputs: 16 mic, (four with XLR/TRS combo connector) and two stereo line (TRS)Dedicated talkback mic inputStereo Main L/R outputs (XLR)Ample monitor outputs (eight total) with 6 mono auxiliary mixes (XLR) and 2 stereo auxiliary mixes.The 2 stereo aux outputs can drive wired in-ear monitors (IEM) directly.Mono auxiliaries may be linked for stereo use.Superb sound qualityClass-A microphone pre-amps32-bit floating point processing24-bit AD & DA convertorsInput channels are fully-featured:Four-band full parametric EQVariable high-cut and low-cut filtersGateCompressor (with de-esser)Main and auxiliary outputs feature:1/3-octave graphic EQ (four-band parametric EQ on stereo auxiliaries)LimiterDelayNotch filtersFour professional quality stereo DSP effects. Choose from:Two types of reverbMono delayStereo delayChorusPitch-changeA pitch correct processor is assignable to any input channel.Eight DCA and eight mute groups.Color, capacitive touch screen graphical user interface combined with hardware controls for fast and intuitive operation.Great results and easy to useInput channel preset library features over 100 presets developed by experienced concert engineers specifically for live sound applications.Wizards assist with input gain adjustment and effects selection and routing.On board Info system gives you instant access to the user manual.Save your own channel presets and complete mixer scenes to internal memory or USB device.Capturing live performance to multi-track has never been easier. Record 22 tracks (all inputs plus a stereo mix) directly to USB hard-drive. Mix down on TouchMix or import into your favorite DAW.Complete mixer remote control via free iPad® App. Monitor control via iPhone/iPod Touch App. Multiple Wi-Fi Connectivity optionsSecurity Lockout ModesUSB Wi-Fi interface and carrying case are included.

Digital mixing has revolutionized so much of the live-entertainment production workflow. But one thing that hasn't changed is having to roll out that heavy, cumbersome old analog snake. That is until now! The new S16 Digital Snake from BEHRINGER takes the burden out of connecting your FOH (Front of House) console with the talent. The S16 provides 16 fully programmable, remotely controllable high-end mic preamps plus 8 analog, balanced XLR returns at the stage end, and connects to the FOH via a single CAT5 cable without the need for a dedicated router. KLARK TEKNIK, a longtime industry-leader in the development of high-end digital audio processing, provided the SuperMAC technology that made all of this possible & BEHRINGER made it affordable. When used as part of a complete X32 system, two S16 Stage Boxes can be cascaded via the built-in AES50 ports, providing connectivity for up to 32 mic/line inputs, 16 balanced outputs and the incredibly-affordable POWERPLAY P-16 Personal Monitoring System, which can feed up to 48 individual monitor mixers. We also included two optical ADAT sockets for connecting channels 1-8 and 9-16 to outboard devices, a convenient USB port for system updates via your PC, plus MIDI I/O for lighting systems and sound module control.Although the S16 was initially designed for use with our flagship X32 digital console, any mixing board with AES50 networking capability can tap into the S16's powerful feature set. So if you happen to work on an analog mixing board occasionally, you could use two pairs of S16 and ADA8000 to form a high-performance, lightweight 16 x 16 digital snake, all on one CAT5 connection, keeping the preamp remote control functionality.The ULTRANET port on the S16 lets you connect directly to the BEHRINGER POWERPLAY P16 system, which provides an easy, affordable way to give your musicians and vocalists what they really want--"more me!" P16-M Personal Mixers let each performer take control of what they hear, allowing you to concentrate on providing the audience with the best possible listening experience. Fast and easy to set up, a basic system can be installed and configured in a matter of minutes and the system can be expanded to adapt to changing needs.As you can see, the S16 is an extremely versatile 16 x 8 digital stage box solution with lots of unique features, at a price that anyone can afford. Built tough to withstand the rigors of the road, S16 only takes up two rack spaces and connects to FOH with a single, inexpensive CAT5 cable. Now you can have the missing link between the stage and FOH at a fraction of the cost of competing systems, and we back it with a comprehensive warranty program.

High-resolution 5" day-viewable Color TFT for easy viewing of workflow components and parameters. Main LCR, 6 matrix buses and 16 mix buses each featuring inserts, 6-band parametric EQ's and full dynamics processing, plus 8 DCA and 6 mute groups.40-input channel, 25-bus digital mixing console for Studio and Live application. 16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality. 17 Fully automated motorized 100 mm faders allow for instant overview, powerful scene management and DAW control.8 XLR outputs plus 6 additional line in/outputs, 2 phones connectors and a talkback section with integrated or external mic. 32 x 32 channel audio interface over USB 2.0. Virtual FX rack featuring 8 true-stereo FX slots include high-end simulations such as Lexicon 480L and PCM70, EMT250 and Quantec QRS etc.

High-resolution 7" day-viewable Color TFT for easy viewing of workflow components and parameters. Main LCR, 6 matrix buses and 16 mix buses each featuring inserts, 6-band parametric EQ's and full dynamics processing, plus 8 DCA and 6 mute groups. 40-input channel, 25-bus digital mixing console for Studio and Live application. 16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality. 17 Fully automated motorized 100 mm faders allow for instant overview, powerful scene management and DAW control. 8 XLR outputs plus 6 additional line in/outputs, 2 phones connectors and a talkback section with integrated or external mic. 32 x 32 channel audio interface over FireWire and USB 2.0Virtual FX rack featuring 8 true-stereo FX slots include high-end simulations such as Lexicon 480L and PCM70, EMT250 and Quantec QRS etc.

25 Fully automated motorized 100 mm faders allow for instant overview, powerful scene management and DAW control. 16 XLR outputs plus 6 additional line in/outputs, 2 phones connectors and a talkback section with integrated or external mic. 32 x 32 channel audio interface over FireWire and USB 2.0. High-resolution 7" day-viewable Color TFT for easy viewing of workflow components and parameters.40-input channel, 25-bus digital mixing console for Studio and Live application. 32 MIDAS-designed, fully programmable mic preamps for audiophile sound quality.Main LCR, 6 matrix buses and 16 mix buses each featuring inserts, 6-band parametric EQ's and full dynamics processing, plus 8 DCA and 6 mute groups. Virtual FX rack featuring 8 true-stereo FX slots include high-end simulations such as Lexicon 480L and PCM70, EMT250 and Quantec QRS etc.

The new EMX5 was designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and is ready to take its sound reinforcement to the next level. Despite the compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want. Box-type robust and portable powered mixer featuring high efficiency power amplifier of 630W and mixer with comprehensive effects, 1-Knob Master EQ™ and built-in feedback suppressor.Powerful & High Efficiency Class-D AmplifierThe EMX7 and EMX5 models feature a built-in high-efficiency power amplifier of 2 x 710W and 2 x 630W of output power respectively. Despite their low power consumption, these amps are capable of very high volume output, yet still manage to remain surprisingly lightweight. Both models also come equipped with an onboard overload protection function to improve reliability and prolong component life and performance quality.Robust But Extremely Portable DesignThe EMX7 and EMX5 benefit from a robust and portable design with a rugged, impact-resistant, powder-coated metal chassis geared towards extended operation and road usage. Large handles on the front and back of the enclosure make it extremely portable, and also help to protect knobs and terminals on the surface of the chassis from impact or pressure during transport.Easy Setup, Easy OperationWith their intuitive, user-friendly architecture, the EMX7 and EMX5 can be setup and operated quickly and easily by users with a fundamental understanding of sound reinforcement. Their versatile enclosure design allows users to choose from a variety of vertical or horizontal placements depending on the type of application. From a tabletop, floor, or installation environment no matter used on a tabletop or from a seated position with the mixer placed on the flo.Onboard Feedback SuppressorFew things make a live performance or speaking engagement take a negative turn like the sudden, uncomfortable, and often embarrassing howling of unwanted feedback. EMX7/5 come equipped with a Feedback Suppressor that utilizes a unique Yamaha digital technology to instantly eliminate annoying feedback with the single switch of a button, which utilizes a seven-band notch filter.1-Knob Master EQ™EMX5’s 1-Knob Master EQ™ lets you apply optimized EQ settings with the simple turn of a knob. The SPEECH setting is geared towards meetings, seminars, or conferences with a limited lower end for clear, defined speech; MUSIC offers a more balanced sound tailored to acoustic or band performances; and BASS BOOST is ideal for DJ performances or audio playback that puts a priority on emphasizing the base sound.Specifications:2x 630W [4Ω], 2x 460W [8Ω] (1kHz THD+N less than 10% CEA2006)2x 500W [4Ω], 2x 370W [8Ω] (1kHz THD+N less than 1% CEA2006)Powerful & High Efficiency Class-D Amplifier12 Line Inputs (8 mono + 4 stereo)High-Z input (channel 4) to connect guitars or basses directly1-Knob Master EQ™Onboard Feedback SuppressorComprehensive, professional 24 different effectsMetal chassis for extended operation and robustnessLarge handles for extreme portability and protectionUniversal power supply eliminates concern on power fluctuationsOptional rack-mount kit available

Compact, cost effective and versatile… the XB-14 is designed for a broad range of applications from small radio or internet broadcast studios, to larger studios with multiple rooms, hospital radio, university radio and community radio. The XB-14 is equipped with a wealth of features specifically for broadcasters, including telephone communication modules for telephone callers, mic fader start sensing for external connection and internal automatic muting of the speaker outputs, stereo channel start/cue outputs for CD deck transport control, separate headphones mix & outputs for guests, an audition bus, and much more!Mic/Line Pre-amps The XB-14’s two stage pre-amp design, offers an expansive and controlled gain range (69dB). Most of the gain comes from the first stage, so unwanted noise is kept to a minimum, and the second stage is padless, with line level signals simply plugged in using the input jack socket, which means lower noise when using the line input.EQThe XB-14 is equipped with a 3-band equaliser circuit on each mono input and a 2-band EQ on the Telco and stereo channels. The frequency and response of each has been carefully chosen to give the maximum performance when using the EQ on a variety of sources.AUX Bus and MIX B stereo BusXB-14 has a single Auxiliary bus that can be used for external processing, effects, recording or auditioning. A separate stereo mix bus is provided for recording an independent mix to the main program mix, or creating a clean feed source with selected channels.Remote ControlThe mono mic/line channels have fader start logic switching, enabling them to control external equipment or automatically mute the speaker outputs to prevent acoustic feedback in localised or self operated applications. The stereo channels have ‘start & cue’ logic outputs to connect to external equipment such as CD players. There are also options to mute the mono inputs remotely using an external “cough” switch or similar.USBGetting audio to and from a computer easily is essential for music and broadcast production, so the XB-14 is super-flexible and super-easy! Just plug in a USB lead and select the USB routing to enable quality audio to and from your PC or Mac.Self or Producer OperatedSeparate monitor mixes can be created for operator, guests or presenter so the engineer can check levels and cue sources while the presenter or guest can listen to a different source. The engineer/producer can communicate to the studio using the ‘Talk’ feature, or off-air to telephone callers.Features:Audition/clean feed bus3-band EQ on mono channels4 mic/line and 4 stereo channels2-band EQ on Telco/stereo channels2 stage, padless pre-amp designFader start sensing on mono channelsStart/cue logic on stereo channel switches2 Telco telephone communication channelsUSB connectivity to interface with PC/MACSeparate headphones mix for engineer/producer and 2 guestsVertically-mounted PCB construction with nutted rotary potsAux and separate stereo busses for processing/recordingControl room outputs with auto and remote mutesRemote mute facility on mic channelsBalanced main outputs with insertsInput signal and peak metering