. go to top icon

Tascam SonicView 16

SKU: APA2023-00069
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty

Intuitive Operation at Your FingertipsThe Tascam Sonicview 16 offers motorised channel faders in two banks of eight, plus a motorised fader for the main stereo bus. Above each bank of channel faders is a colour touch panel that allows you to view entire mixer channels, or get down to details, contro...more

  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
5.545 €

VAT included and Κανονικά Μεταφορικά

Upon Order
Add to cart
apa support icon

NEED HELP?

Our expert engineers can assist you!

Intuitive Operation at Your Fingertips

The Tascam Sonicview 16 offers motorised channel faders in two banks of eight, plus a motorised fader for the main stereo bus. Above each bank of channel faders is a colour touch panel that allows you to view entire mixer channels, or get down to details, controlling each parameter with your fingertip. Save fader settings and instantly recall them later to continue where you left off. Check levels in a mix or submix at a glance and adjust them during mixdown with either the physical faders or the touchscreen. Your changes will be instantly updated in both.

The Amazing VIEW

Truly the next generation in mixer user interfaces for recording and live, the powerful intuitive Tascam Visual Interactive Ergonomic Workflow (VIEW) system lets you quickly and easily configure Sonicview’s touchscreens. Thanks to the VIEW user interface, there are three different ways to view your settings. Each touchscreen can be configured independently, so you can monitor and control any combination of settings you want, in whichever screens you want, whenever you want. For instance, you could monitor levels for eight channels of vocals on screen 1, while tweaking the parametric EQ on a drum submix or keeping an eye on the output bus level and compression curve on screen 2.

Channel Strip View

Monitor and control eight adjacent channels and view them as virtual channel strips like on an analogue mixer.

Module View

Monitor and control any two sets of parameters simultaneously for one single channel.

Individual View

Monitor and control a custom selection of functions for any channel or group of channels.

High-End Audio Quality

Thanks to a 54-bit floating-point FPGA mixing engine, Tascam Sonicview delivers the finest audio performance in its class with continuous, high-definition 32-bit/96-kHz sampling and 32-bit analogue-to-digital converters. The mixing engine’s float-point processing makes it possible to flexibly change levels without compromising resolution, while ensuring ultra-low latency, even in analogue-to-analogue connections. The result is no-compromises performance, including with Dante networks and in-line monitoring systems, for pristine tracking, mixing, and playback.

Input Channels

Sonicview 16 offers an array of versatile inputs for recording and mixing. 8 channels with XLR mic/line inputs and 8 channels with both XLR mic inputs and balanced 6.3-mm TRS line inputs allow maximum flexibility. You also get TRS insert points on two channels, two stereo pairs of RCA aux inputs, and an XLR input for a talkback microphone.

Channel Control and Processing

There’s much more to Sonicview than meets the eye. Internally, these recording consoles have a generous 40 mono channels and two stereo channels so you can fly-in backing tracks to make a small vocal band sound huge. You can also accommodate additional physical audio inputs via the expansion slots for larger ensembles, manage sources from every part of a venue via the Dante network, and mix dozens of DAW tracks. Eight DCAs enable you to easily control groups of channels. Programmable layer keys select which custom combination of channels and output buses are controlled by the motorised faders. Start working on a mix, save your fader settings, and continue mixing later – thanks to the motor faders, you’ll pick up exactly where you left off.

Top-of-the-Line Sound With Class 1 HDIA Mic Preamps

Each microphone input feeds a Tascam Class 1 HDIA (High Definition Instrumentation Architecture) preamp – the finest mic preamplifier we’ve ever made. Thanks to an instrumentation amplifier with extraordinary good noise characteristics in the first stage, these microphone preamps exhibit excellent equivalent input noise (EIN), signal-to-noise ratio, distortion ratio and frequency response. The ultra-definition mic preamps used in Sonicview will pick up and record the slightest nuance from rosin on a violin bow to the subtle dynamic changes of a voice or saxophone. The microphone inputs can handle signal levels up to +32 dBu, providing plenty of headroom for sudden level increases.

The combination of Class 1 HDIA preamps, 32-bit/96-kHz ADCs and our 54-bit FPGA mixing engine is impressive but Tascam didn’t stop there: We conducted extensive internal and external evaluations to tune the Sonicview consoles for optimal performance. The result is best-in-class sound that will never disappoint for mixing and recording both live or in the studio.

Built-In USB Audio Interface and Stereo Recording

The built-in 32-in/32-out USB audio interface makes Sonicview a first-rate front end for recording and broadcast studios, as well as for capturing live events. Record your choice of channel direct outs, flex buses and the L/R main bus to your favourite DAW at up to 96 kHz with the same 32-bit precision used throughout the console.

You can simultaneously capture the main mix directly to the onboard stereo SD recorder – handy when the band wants to listen to their performance at the hotel or on the bus. A top-panel port also lets you record in stereo to a USB flash drive.

Built-In 32-Track Audio Recorder as an Option

Tascam Sonicview offers multiple ways to record. In addition to the integrated audio interface and stereo recorder, a multi-track recording card (IF-MTR32) can be installed as an option, enabling you to capture 32 audio tracks directly to an SDXC card. The SD recorder supports punch-in/punch-out for all 32 tracks simultaneously as well as pre-record, auto-record, and markers. Best of all, it automatically saves and closes the file every 60 seconds during recording to safeguard against data loss. So you can let the recorder do it’s job worry-free while you focus on mixing.

Flexible Output Buses, Advanced Processing

You get a wealth of output buses with powerful signal processing and flexible routing options. In addition to the main stereo bus, Sonicview provides 22 flexible output buses, each of which is configurable as a subgroup, aux or matrix. Provide multiple stereo in-ear monitor submixes without running short of buses and send to the analogue outputs. Create matrix mixes for multiple loudspeaker zones and send them over the Dante network to record mixes, deliver sound to theatres and concert halls, and more. All output buses are equipped with 31-band graphic EQ, real-time analyzer functions, 4-band parametric EQ, compressor/ducker, delay, plus Solo, Pan, and Mute.

Each individual input channel can be looped through four additional effects, including a high-quality reverb.

Dante-Enabled for Superior Networking

Dante® audio-over-IP networks integrate thousands of concert touring systems, as well as installed systems in recording studios, radio stations, corporate boardrooms, city halls, and much more. Tascam Sonicview consoles can serve as the audio center of these systems usimg their built-in 64-in/64-out Dante interface that supports AES67 mode, SMPTE 2110 mode and Dante Domain Manager. Two Dante ports enable redundant streams. Thanks to the combination of Dante and the recording capabilities built into Sonicview, you can mix and record concerts, panel discussions, lectures, worship services and more from any network location, including a remote recording or broadcast studio.

Physical Outputs and Expansion Capability

As you’d expect, Sonicview offers plenty of physical outputs, with 16 XLR line outputs, and two XLR monitor outputs. If that’s not enough, you can add more analogue, MADI, or AES/EBU I/O with an optional expansion card. To further expand the system, add one or more optional 16-in/16-out Dante-networked stage boxes (SB-16D). Microphone gain for all 16 inputs can be remotely controlled from Sonicview, and the SB-16D can be used as a floor box or rack-mounted. The combination of Dante networking and multiple stage boxes makes Sonicview a great recording and mixing solution for multi-room studios and capturing large ensembles.

Remote Control and Offline Editing

Whether in the recording studio, onstage, backstage, in a control room or at the rear of a concert hall, you’re always in full control of your Tascam Sonicview mixer. Just connect a Wi-Fi router to the Ethernet port and use our free control software for Windows, macOS and iPadOS to manage your your Sonicview from virtually anywhere in the venue. Edit settings offline in advance so you’re ready to go when a session or show begins, then make adjustments from the console or from the software.

Work Quickly With Function Keys

Sonicview offers intuitive, analogue-like operation while providing a variety of convenient digital functions that can be customised as needed. Eighteen user-defined function keys can be assigned to recording with the internal recorder, playback and more. Several keys are conveniently preassigned to functions such as Sends On Fader and Snapshot Recall but you can reassign them as desired. An optional footswitch allows delay times to be set by tapping.

Clear, Mistake-Free Navigation

When you’re recording and mixing a show, broadcast, or crucial recording session, you can’t afford to hit the wrong button or grab the wrong control. The Sonicview control surface makes it easy to see at a glance what you’re controlling, even in a dark concert hall. Each channel strip includes a channel-name LCD with a full-colour LED. The User keys also feature full-colour LEDs, so you can group each input source and function by colour and view them easily. The Solo and Channel Select keys have distinctive shapes, and the Mute key is guarded with a cap. With these features and the customisable touch panels, you always know where you are and what you’re controlling.

External Control and Clocking

In addition to audio inputs and outputs, Dante and USB ports, Sonicview is equipped with a GPIO interface (on a DB25 connector) with eight inputs and eight outputs for external control, making it suitable for events and relay applications. BNC wordclock In and Out/Thru enable digital audio synchronisation, and an Ethernet port can connect to a Wi-Fi router for wireless control. Sonicview also has two Tascam expansion slots that accept a selection of expansion cards.

The Music Never Stops

Your business depends on reliable equipment that will stay in service with minimal interruptions, and we designed Sonicview consoles accordingly. Sonicview’s recording and mixing engine and real-time operating system are completely separated from the physical mixing surface, greatly improving stability. In the unlikely event that the mixing surface becomes inoperable, the sound won’t stop, and operation can be restored by restarting the control surface operating system. Meanwhile, the show will go on.

Specifications

  • Tascam VIEW (Visual Interactive Ergonomic Workflow) interface allows intuitive operation with three different view modes 
  • Multiple displays with two 7-inch colour touchscreens 
  • 44 input channels (40 mono, 2 stereo) 
  • 22 flexible output buses plus main L/R bus with 31-band graphic EQ 
  • 54-bit float-point FPGA mixing engine, 96 kHz sampling rate 
  • Ultra-low latency: 2× Fs (20.8 μs) in mixing engine, 0.51 ms analogue-to-analogue 
  • 32-bit/96 kHz A/D and D/A conversion 
  • Tascam HDIA (High-Definition Instrumentation Architecture) microphone preamplifiers 
  • Built-in Dante interface (64 inputs/outputs); supports redundancy, AES67, DDM and SMPTE 2110 
  • 32-bit/96 kHz USB audio interface (32 inputs/outputs) 
  • 16 mic/line inputs (up to +32 dBu), 16 XLR line outputs with flexible routing 
  • Four multi-effects processors 
  • Tascam Sonicview Control software for Windows, macOS and iPadOS enables remote control and off-line editing 
  • Two Tascam expansion slots 
  • Optional 32-track SDXC recorder, MADI, AES/EBU and analogue I/O cards available for the second slot 
  • Operating systems for hardware mixing surface and mixing engine are independent of each other for high stability and continuous audio flow 
  • Faders can be individually removed and replaced, top panel can be disassembled without disconnecting cables for easy servicing 
  • Library for snapshots, effects, modules, parametric EQ, graphic EQ, gate, compressor 
  • 18 assignable user keys, seven custom fader layers, eight DCA groups 
  • 16+1 100-mm motorised faders 
  • 16 encoder knobs with colour LEDs 
  • 16 LC displays with colour LEDs for channel name, input level and gain reduction meter 
  • Internal 2-track recording/playback with SD card or USB flash drive 
  • 8 TRS line inputs, 2 RCA stereo input pairs, XLR talkback input 
  • XLR monitor outputs 
  • Standard (6.3-mm) and mini (3.5-mm) headphones outputs 
  • Word clock In, Out/Thru 
  • 1000BASE-T gigabit Ethernet 
  • 8-in/8-out GPIO on DB25 connector 
  • TRS footswitch connector 
  • XLR 4-31 lamp connector 
  • Power switch with guard 
  • Optional Dante-enabled stage box with 16 inputs/outputs (SB-16D)
  • Supported Operating Systems
  • Windows:
  • Windows 11 (version 22H2)
  • Windows 10 (version 22H2)
  • Mac:
  • macOS Ventura (13.0)
  • macOS Monterey (12.0)
  • macOS Big Sur (11.0)
  • macOS Catalina (10.15)


Write your Review

How would you rate this product?