Lipinski

A superb quality two-way passive magnetically shielded speaker with twin 7-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter . One of the best speakers in the world regardless of price, product of the year in the Stereophile magazine.         Features :  One 1" (25mm) Neodymium Ring Radiator tweeter  Two 7" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 56Hz-20kHz ±1dB (31Hz-40kHz ±3dB)  SPL: 90 dB 1W/1m  Impedance: 4 Ohms  Dimensions: 23.6" H x 9.4" W x 12.4" D (60cm x 24cm x 32.5cm)  Weight: 41 lbs (18.5 kg) * Price for 1 speaker

Custom pedestal , comprised of 5 adjustable layers of reinforced dense MDF. Stacking in removable segments allow of tweeter adjustable height. The re-unforced pedestal also allows for solid bass transfer.

Lipinski Powered Stands feature the new L-401 power amplifier built into the stand rather than the speaker, enabling short speaker cable length while allowing easier amplifier setup, especially in a surround environment.Cut for the total height of 30" (75 cm) and 36" (90 cm) to drive treble straight to the discerning ear of a listener at his/her sitting position. Just as all Lipinski Sound products, the stands are stable, rigid, and of fine quality.

Lipinski Powered Stands feature the new L-301 power amplifier built into the stand rather than the speaker, enabling short speaker cable length while allowing easier amplifier setup, especially in a surround environment.Cut for the total height of 30" (75 cm) and 36" (90 cm) to drive treble straight to the discerning ear of a listener at his/her sitting position. Just as all Lipinski Sound products, the stands are stable, rigid, and of fine quality.

Lipinski Powered Stands feature the new L-401 power amplifier built into the stand rather than the speaker, enabling short speaker cable length while allowing easier amplifier setup, especially in a surround environment.Cut for the total height of 30" (75 cm) and 36" (90 cm) to drive treble straight to the discerning ear of a listener at his/her sitting position. Just as all Lipinski Sound products, the stands are stable, rigid, and of fine quality.

Lipinski Powered Stands feature the new L-401 power amplifier built into the stand rather than the speaker, enabling short speaker cable length while allowing easier amplifier setup, especially in a surround environment.Cut for the total height of 30" (75 cm) and 36" (90 cm) to drive treble straight to the discerning ear of a listener at his/her sitting position. Just as all Lipinski Sound products, the stands are stable, rigid, and of fine quality.

.Lipinski power amplifiers are dual topology, which means there are two separate power amplifiers Inside. Our state-of-the-art power amplification uses dual topology: we employed dual mono design not only for the stereo amp, but also for our monoblocks. This is to control one parameter which has substantial influance on the perception of quality: the damping factor. This one controls the speed and accuracy of lowest frequencies, resulting in very tight and controlled bass. This configuration also significantly lowers distortion.The L-401 monoblock, due to the same dual topology design as the subwoofer amp, can be used in biamplificaion mode.  Bi-amp mode increases microdynamics.  The L-401 can also be switched for bridged mode, allowing for 600 Watts of unfettered power per channel.Since we believe that the best speaker cable is short cable, the L-401 is designed to be built into our speaker stand, making up the L-3601 Powered Stand.The stand fits directly underneath the L-707A Monitors.Be sure to check out our Reviews section for the latest review of our Monoblock, against Pass Labs and Bryston.SpecificationsOutput power: 1 channels: 200W @ 8ohms, 300W @ 4ohms,Gain: 30/35dB,Bandwidth: 1Hz–50kHz -3db,Integrated high pass filter optimized for L-505A/L-707,THD+noise: 0.01% THD @ 50W,

Lipinski power amplifiers are dual topology, which means there are two separate power amplifiers Inside.The L-400 subwoofer amplifier works in parallel mode, which significantly enhances damping factor - the most important parameter to control low frequencies.This surpasses commonly used bridge mode which significantly lowers the damping factor.        SPECIFICATIONS Output power: 1 channels: 200W @ 8ohm, 300W @ 4ohm, 400W @ 2ohm,1 Ohm stable,Gain: 30-40dB,Bandwidth: 1Hz–150Hz,Integrated low pass filter optimized for L-505A/L-707,THD+noise: 0.01% THD @ 50W, 1000 below 100Hz,Input impedance: 10kohms,Inputs: 2x XLR, 2x RCA,Multi color front glass light,Dimensions: 17.3"H x 3.1"W x 8.7"D (44cm x 8cm x 22cm),Weight: 33 lbs (15 kg).

A top quality subwoofer  equipped with a 15-inch double voice coil chassis which is built into a sealed housing with a double wall design.Specifications:  One 15" dual coil driver in sealed, dual wall enclosure.Frequency response: Room dependant. Typically flat to 23 Hz.SPL: 90 dB 1W/1mImpedance: 4/8/16 OhmsDimensions: 18" H x 18"W x 19.4" D (45,6cm x 45,6cm x 49,3cm)Weight: 64.4 lbs (29 kg)

Based on the famous L707, Lipinski Sound proudly presents the new L707A SeriesOne 1” (25mm) custom Neodymium Ring Radiator tweeterFive 7" (180mm) custom Glass Fiber Mid-Woofers In MTM configurationFrequency response 43Hz-20kHz +/- 1 dB (24Hz-40kHz +/- 3 dB)Speaker-to-speaker consistency: +/- 1/4 dB - IEC Power Handling: 400W - SPL: 90.5 dB lW/lm Impedance 6 OhmsDimensions: 51 7/8”H x 10”W x 14 Ό” / 21”D (1317mm x256mrn x 362/534mm) - high provided without pedestalWeight: 106.7 lbs (48 kg)Price Per Unit

Based on the famous L707, Lipinski Sound proudly presents the new L707A SeriesOne 1" (25mm) custom Neodymium Ring Radiator tweeterTwo 7" (180mm) custom Glass Fiber Mid-Woofers In MTM configurationFrequency response 5OHz-20kHz +/-1dB (28Hz-40kHz +/-3dB)Speaker-to-speaker consistency; +/- 1/4 dBIEC Power Handling: 250WSPL:90.5dB lW/lmImpedance: 4 OhmsDimensions: 24 1/4"H x 10"W x 14 1/4"D (616mm x 256mm x 362mm)Weight: 47.8 lbs (21,5 kg)

One of the best speakers in the world. Based on the L707, Lipinski Sound proudly presents the new L707A SeriesOne 1" (25mm) custom Neodymium Ring Radiator tweeterEight 7” (l00mm} custom Glass Fiber Mid-Woofers in MTM configurationFrequency response: 37Hz-20kHz +/- 1 dB (20Hz-40kHz +/- 3 dB)Speaker-to-speaker consistency: +/- 1/4 dBIEC Power Handling: 600WSPL: 90.5 dB lW/lmImpedance: 8 OhmsDimensions; 79 7/16”H x 10”W * 21"D (2018mm x 256mm x 234mm) Height provided without pedestalWeight: 165.6 lbs (74,5 kg)

A superb quality two-way passive magnetically shielded speaker with twin 7-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter . One of the best speakers in the world regardless of price, product of the year in the Stereophile magazine.         Features :  One 1" (25mm) Neodymium Ring Radiator tweeter  Two 7" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 56Hz-20kHz ±1dB (31Hz-40kHz ±3dB)  SPL: 90 dB 1W/1m  Impedance: 4 Ohms  Dimensions: 23.6" H x 9.4" W x 12.4" D (60cm x 24cm x 32.5cm)  Weight: 41 lbs (18.5 kg) * Price for 1 speaker

A superb quality two-way passive magnetically shielded speaker with twin 5-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter. The little brother of the famous L-707 offer similar sound qualites with a very fast and neutral sound.        Features :   One 1" (25mm) Neodymium Ring Radiator tweeter  Two 5" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 71Hz-20kHz ±1dB (46Hz-40kHz ±3dB)  SPL: 90 dB 1W/1mImpedance: 4 Ohms  Dimensions: 20" H x 8" W x 5.5" D (50cm x 20cm x 13.9cm)  Weight: 28 lbs (12.6 kg) * Price for one speaker

Two-way powered monitor including all the best technologies developed by Lipinski:1. Based on our Signature Series:a. custom driversb. cabinet made of 1 1/4" (30mm) MDF with internal bracing 2. Based on our latest development in amplifier technology:a. Lipinski Square - class A modules patented circuitryb. No capacitors in the signal pathc. No Integrated Circuits in the signal pathd. 2 x 300W power amplifiers 3. Custom construction and dampening.To avoid vibration caused by speaker proximity to power amplifier -which causes a significant amount of microphonic effect distortion -4. Low order crossover 5. Oversized power supply 6. Sophisticated tweeter protection 7. 1 dB step adjustable high and low frequencies 8. Subwoofer high-pass filter 9. Balanced/unbalanced Inputs and throughputs 10. 100-240V /50-60Hz operation * Price for one speaker