Turntables

Experience sophisticated sound with the Music Hall MMF Mark 1 turntable. Music Hall founder, Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark 1 is no exception!Featuring an all-new tonearm design, the Mark 1 delivers exceptional rigidity and internal damping, with a precision aluminum headshell, CNC-machined tonearm flange, and fully adjustable VTA – a feature almost never seen in this price-range. The magnetic anti-skating feature and factory-set pre-adjusted and fixed counterweight make setup a breeze.The Mark 1 also boasts a high-quality, super-fast, and dynamic low mass Audio Technica AT3600L cartridge, perfectly matched to the characteristics of the tonearm, creating a beautiful, full-bodied sound that until now has been impossible to achieve in a budget turntable. With the Music Hall MMF Mark 1, you can enjoy premium audio performance without compromise.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

Experience sophisticated sound with the Music Hall MMF Mark 1 turntable. Music Hall founder, Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark 1 is no exception!Featuring an all-new tonearm design, the Mark 1 delivers exceptional rigidity and internal damping, with a precision aluminum headshell, CNC-machined tonearm flange, and fully adjustable VTA – a feature almost never seen in this price-range. The magnetic anti-skating feature and factory-set pre-adjusted and fixed counterweight make setup a breeze.The Mark 1 also boasts a high-quality, super-fast, and dynamic low mass Audio Technica AT3600L cartridge, perfectly matched to the characteristics of the tonearm, creating a beautiful, full-bodied sound that until now has been impossible to achieve in a budget turntable. With the Music Hall MMF Mark 1, you can enjoy premium audio performance without compromise.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

The XA B balanced acrylic turntable is a gorgeous, high-performance edition to the X Series. It implements a 10″ one-piece aluminum tonearm with a balanced 5-pin DIN output. Also utilizing a balanced balanced MM phono cartridge (the first of its kind!) it brings you one step closer to balanced operation. You need only a DIN > Mini XLR or DIN to XLR cable with which to connect the turntable to any of our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B, or Phono Box RS2 balanced phono preamps.A Clearer PictureFor over 30 years we’ve designed & built turntables that focus on sound quality over convenience-oriented features. Along the way we’ve experimented with materials that vary in their resonance properties, and acrylic has remained . Our first ever acrylic turntable (the 6.9Perspective) was a huge success. 6PerspeX variants have been around for 15+ years too, not to mention a host of 2Xperience variants in acrylic. Needless to say, the limited run of our Perspective Final Edition turntable sold out swiftly as well. We take pride in how these turntables take advantage of both the aesthetic & sonic virtues of acrylic in hi-fi, but using acrylic in manufacturing not as easy as you might think. True, it’s anti-resonant, but the rest of the turntable too must lend sonic value to the equation. Measurement & critical listening reveal that acrylic can actually over-damp sonics if it’s not used thoughtfully. XA B uses an aluminum tonearm & platter, the Pick it PRO Balanced cartridge & purpose-selected isolation feet to render music in a lively, dynamic & detail-rich manner… an experience that becomes doubly immersive when you decide to take the plunge into the world of balanced phono.Premium 10″ TonearmThe XA B turntable features a premium 10“ one-piece aluminum armtube. The single-piece tube heightens rigidity while the 10″ length widens the tonearm’s arc, reducing tracing error. The low-friction 4-pinpoint cardanic bearing assembly guarantees precise, stable & accurate tracking. We’ve selected the aluminum armtube over carbon fiber for its sonic merits when paired with the resonant frequency of the acrylic plinth. The tonearm also offers audiophiles full control over their adjustment parameters. One can fine-tune not only tracking force & anti-skate, but also VTA & azimuth if needed. Listeners with cartridge-mounting skills are encouraged to try various cartridges and/or record mats to achieve their desired sonics!Our classic anti-skating system (adaptive anti-skating) changes with the skating force, which varies across a record side as groove conditions change. The TPE-damped counterweight significantly reduces unwanted armtube resonance. We use high-precision stainless steel cardanic tonearm bearings, meaning there’s minimal friction as the tonearm moves and absolutely no ‘play’ (or wiggle) in the bearing structure. This allows the stylus & cartridge to do their jobs unimpeded.True BalancedThe Pro-Ject Pick it PRO Balanced cartridge allows for “True Balanced” signal transmission. A revised version of the Pick it PRO, we re-route the grounding so that it sends a symmetrical signal. The big advantage of a balanced connection is its ability to remove accrued noise and interference from the transmission line (not to mention +6dB gain!). In short, you get more music & less noise – the improvement is not subtle.Our True Balanced cable range offers several options for connecting your XA B to our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B or Phono Box RS2 phono stages. Any phono preamp with mini XLR or XLR inputs will do the trick! With XA B’s DIN output, you’d require either an DIN > mini XLR or DIN > XLR cable.High-Quality DIN > RCA CableCables cannot add any information back to a given signal, rather, they’re responsible for allowing as much musical information as possible through to the receiving device. This is why we include our Connect it Phono E 5P > RCA cable. Optimized for phono applications, we’ve implemented quality metals & careful configuration to ensure lossless signal transmission.TPE-Damped Die-Cast PlatterThe 1.7kg (3.75lbs) die-cast aluminum platter is precision-balanced with additional machining after casting. This facilitates perfect platter rotation while playing records. The heavy aluminum platter also adds a TPE (thermoplastic elastomer) damping ring & corresponding cutout on the underside, muting any resonance created by the metal record platter and contributing to the flywheel effect.Damped, Height-Adjustable FeetThe XA B stands on three damped & height-adjustable feet for excellent isolation. By using 3 feet we are able to increase stability on uneven surfaces for optimal leveling – a critical setup parameter in terms of maximizing the performance of a tonearm & cartridge.Sophisticated DC/AC GeneratorOur turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to DC/AC generator within the turntable, which in turn powers the AC motor. The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.Two Upgrades in One BoxClean & stable power is critical for phono setups. The included power supply is a great starting point but you can take it a step further. Power Box S3 Phono provides power for the Debut PRO B (15V) as well as your Pro-Ject phono stage (18V). Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps simultaneously. The sophisticated DC filtration can have a dramatic impact on overall sound quality. In addition to the sonic improvements, Power Box S3 Phono also offers users a cleaner cable solution (only one wall-wart needed for the PSU).

The Audio-Technica AT-LP70XBT is a fully automatic belt-drive turntable with Bluetooth, ideal for anyone starting out with vinyl who also wants room to upgrade. It combines the analogue sound of records with aptX Adaptive wireless connectivity, and comes with the AT-VM95C cartridge already fitted and aligned.It plays 33⅓ and 45 RPM records at the touch of a button, connects to Bluetooth speakers and headphones or to an amplifier through its built-in phono preamp, and needs no tonearm setup. Colour: Black.

Quality Affordable Turntable with Twin Gimbal Tonearm, Built-in Preamp, and Ortofon CartridgeFor the true vinyl enthusiast, the Dual CS 518 turntable is equipped with a sophisticated twin gimbal tonearm design using pivot ball-bearings for optimal precision. This superior tonearm has the ability to guide even high-end cartridges through your record grooves with the greatest degree of precision and reliability.Included with the CS 518 is an Ortofon 2M Red MM phono cartridge and a switchable MM-phono preamplifier, making this 'table ready-to-run after easy set-up. A hinged dust cover completes the package."Priced to Be Heard"England's What Hi-fi? magazine gave the CS 518 its top rating of Five Stars, for reasons of "dynamic and expressive sound, good level of insight, easy to set up and use… It’s well priced and sonically talented enough to be a viable alternative to the best at the price.""Priced to be heard," proclaims Michael Fremer's analogplanet.com review for November 22, 2021. "The 'star' of the show here is the twin-gimbal ball-bearing tonearm, which though I have no way of measuring, has a precise 'feel' and sounded so, as well negotiating tough to track records especially on vocal sibilants. The servo-controlled adjustable 3 speed D.C. motor is also a stand-out feature.""Easily Worth the Asking Price""The CS 518 is not inexpensive, but the workmanship and the sound it produces make it easily worth the asking price," notes Thom Moon, soundstageaccess.com, November 1, 2021. "It’s easy to set up, it offers fine sound quality, it’s well constructed, and it looks good doing its part. If you’re in the market for a turntable in this price range… give the Dual CS 518 a very close look. I’m betting you won’t regret it.""Another pleasant chapter is added to the glorious history of Dual turntables with this device," writes Michael Lang, stereo-magazine.com, October 7, 2021.Twin Gimbal Tonearm and Precision PlatterThe CS 518 boasts a straight, statically balanced tonearm with an advanced twin gimbal design. Four precision pivot ball-bearings provide smooth and accurate tracking. The adjustable tonearm features provide the option to change the phono cartridge in the future should you wish to upgrade and to alter the tracking force and anti-skating accordingly.The precise aluminum die-cast platter uses a heavy rubber mat for resonance damping along with a solid platter bearing with a hardened steel spindle in a brass bushing.Selectable Electronic Speed ControlA turntable as easy to use as the CS 518 would never insist that you wrestle with belts to change speeds. Operation couldn't be simpler. The precise optical speed control lets you select 33 rpm, 45 rpm, or even 78 rpm with the twist of a knob.MM Phono Preamplifier Built-inThere is no obligation to use an outboard phono preamplifier with CS 518. This turntable comes with a built-in phono preamplifier. It can be either connected to the phono input or the line input at the amplifier. The built-in phono stage can switched on or off via a switch in the back. If you choose to, you can bypass the phono stage and use one of your own, or one built-into your amp or receiver of choice instead.Factory Installed Ortofon 2M Red CartridgeAn Ortofon 2M Red moving magnet phono cartridge is pre-mounted and precision-aligned. The 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. It features a new, improved engine that provides an increased output of 5.5mV, an optimized sound reproduction, and a high level of sonic accuracy.

The CS 529 offers maximum listening pleasure thanks to the twin gimbal tonearm bearing and high-quality pivot ball bearings for optimum record tracking.The classic dual tonearm moves autonomously at the touch of a button - simply place the record on the turntable and press the start button. Operation is convenient via the terminal on the device or externally via Bluetooth.Use the Bluetooth function to transmit the audio signal or control the device via a smartphone or tablet. Experience convenient operation and first-class sound with the CS 529 from Dual.Plinth:Solid MDFSubchassis construction with rubber dampersBluetooth for audio and remote-control functionsSurface option: Walnut wood veneerPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingHardened steel spindle in a brass bushingTonearm:Twin GimbalAll functions are fully automatic or manualSolid aluminium gimbal constructionPivot ball-bearingsDrive:DC – Belt/RegulatedOptical speed control at the motorRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

Inspired by the NaiadThe Planar 10 belongs to Rega's Reference series and is inspired by the Naiad, the company's laboratory turntable. According to Rega it is the first production turntable to use ceramic bracing, which provides an exceptionally rigid mount for the RB3000 tonearm and the custom main bearing. This version comes in matt Polaris grey, with the PL10 PSU power supply, and is supplied without a cartridge. It is hand-built in England.Main bearing and dust coverThe low-mass sub-platter is machined from aluminium and carries a hardened tool steel spindle running in a custom brass housing. The assembly is mounted so as to limit the energy stored in the plinth. As on the Planar 8, the outer frame has been dropped in favour of a single-piece removable dust cover, for even lower weight.Cartridge and systemThe Planar 10 pairs ideally with Rega's Apheta 3 or Aphelion 2 moving coil cartridges and a phono stage such as the Aura MC. Rega recommends amplifiers such as the Aethos and Osiris. It has received accolades from Stereophile, Hi-Fi Choice (Editor's Choice), Hi-Fi World (Best Turntable 2020) and What Hi-Fi? (5 stars).

AT-LPW50PBThe AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.Stunning Look, Stunning SoundMarked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.Designed for a Higher Level of ListeningThe AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½"-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

The CS 529 offers maximum listening pleasure thanks to the twin gimbal tonearm bearing and high-quality pivot ball bearings for optimum record tracking.The classic dual tonearm moves autonomously at the touch of a button - simply place the record on the turntable and press the start button. Operation is convenient via the terminal on the device or externally via Bluetooth.Use the Bluetooth function to transmit the audio signal or control the device via a smartphone or tablet. Experience convenient operation and first-class sound with the CS 529 from Dual.Plinth:Solid MDFSubchassis construction with rubber dampersBluetooth for audio and remote-control functionsSurface option: Walnut wood veneerPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingHardened steel spindle in a brass bushingTonearm:Twin GimbalAll functions are fully automatic or manualSolid aluminium gimbal constructionPivot ball-bearingsDrive:DC – Belt/RegulatedOptical speed control at the motorRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

The Dual CS 329: Simplicity with sophistication for the perfect introduction to analogue music playback. With Plug & Play you get a pre-assembled complete package - plug it in and get started straight away!The fully automatic CS 329 offers convenient convenience as the tonearm swivels, lowers and raises automatically. Simply place the record on top and press the start button. Experience uncomplicated music enjoyment.Plinth:Plastic / MDFElastomer vibration absorber inside the feetRemovable dust coverPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingTonearm:Straight, statically balancedPlug & Play: all adjustments are factory fixedAutomatic or manual operationDrive:DC- Motor / BeltRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

The Primus Maximus, an exclusive limited edition special model, defines the reference class. It is only available to pre-order and is handcrafted.As a technology carrier, it builds on the highlights of Dual's history and develops them further in the 21st century, while retaining classic features such as precision, twin gimbal tonearms and direct drive.The result is a musically inspiring record player. Don't just enjoy the sound, celebrate the silence with the Primus Maximus. Get your exclusive copy now!Plinth:Aluminium / Solid MDFThe plinth is finished with real wood veneers, each unique unit is created individually. The critical components, such as motor, platter and arm are fixed to a 10mm thick aluminium base plate. The heavy top and base plates are connected to minimise vibration.Platter:Solid AluminiumThe heavy platter, weighing 2.7kg, is machined from a solid block of aluminium and refined with an anodised surface finish. The platter weight is exactly matched to the motor regulation in order to reduce wow and flutter to an absolute minimum.Tonearm:Twin Gimbal Design / Spring loaded tracking forceThe tonearm base and both gimbal elements are machined from solid aluminium. Precision pivot ball-bearings are used in conjunction with hardened steel spikes to ensure tightest tolerances within the tonearm assembly over a long lifetime. The tracking force is independent of gravity and adjusted with a torsion spring.Drive:Direct-driveThe drive unit is engineered and made in Germany. Its regulation is specifically designed for high-end audio application, placing emphasis on stability and smooth running, without quick start up times or high torque.

Dual direct drive concepts have been synonymous with outstanding durability and quality for decades. The CS 618 impresses with a quiet direct drive that keeps the platter speed precise and silent.The turntable's twin gimbal precision tonearm is further optimised by the Ortofon 2M Blue to deliver outstanding sound quality. Discover an even more precise and improved audio reproduction for a first-class listening experience.With an electronic motor stop and automatic lift at the end of the record, the CS 618Q offers the highest level of operating comfort for a manual turntable. In addition, there are the other comfort elements of the CS series. The stepless antiskating can be easily adjusted using a rotary knob with a clear scale. The electronic adjustment of the three speeds is conveniently carried out via a rotary switch, while the appropriate pickup can be easily changed using the headshell.Plinth:Solid MDFOptions: Black vinyl, gloss paint, walnut veneerSwitchable auto-stop functionElastomer vibration absorber inside the feetPlatter:Aluminium Die-castHeavy and precise aluminium die-cast platterHardened steel spindle integrated in the direct-driveHeavy rubber mat for resonance dampingTonearm:Twin GimbalSwitchable automatic tonearm lift functionSolid aluminium gimbal constructionFour fine pivot ball-bearingsDrive:Direct-driveQuartz stabilised for 33 / 45 / 78No vibrations through coreless inductorsDouble shielded to eliminate magnetic fields

Dual direct drive concepts have been synonymous with outstanding durability and quality for decades. The CS 618 impresses with a quiet direct drive that keeps the platter speed precise and silent.The turntable's twin gimbal precision tonearm is further optimised by the Ortofon 2M Blue to deliver outstanding sound quality. Discover an even more precise and improved audio reproduction for a first-class listening experience.With an electronic motor stop and automatic lift at the end of the record, the CS 618Q offers the highest level of operating comfort for a manual turntable. In addition, there are the other comfort elements of the CS series. The stepless antiskating can be easily adjusted using a rotary knob with a clear scale. The electronic adjustment of the three speeds is conveniently carried out via a rotary switch, while the appropriate pickup can be easily changed using the headshell.Plinth:Solid MDFOptions: Black vinyl, gloss paint, walnut veneerSwitchable auto-stop functionElastomer vibration absorber inside the feetPlatter:Aluminium Die-castHeavy and precise aluminium die-cast platterHardened steel spindle integrated in the direct-driveHeavy rubber mat for resonance dampingTonearm:Twin GimbalSwitchable automatic tonearm lift functionSolid aluminium gimbal constructionFour fine pivot ball-bearingsDrive:Direct-driveQuartz stabilised for 33 / 45 / 78No vibrations through coreless inductorsDouble shielded to eliminate magnetic fields

The Music Hall MMF-9.3 SE is a top-tier turntable for audiophiles, featuring a two-speed belt-drive system and a unique triple-plinth construction that isolates the critical sound-reproducing components for optimal performance. The turntable boasts a classic real walnut wood veneer finish, exuding elegance and sophistication.The MMF-9.3 SE is equipped with a one-piece carbon fiber tonearm, with a counterweight decoupled from the arm to act as a resonance damper. The fully isolated DC motor, with speed settings for 33 1/3 and 45 rpm, is positioned at the front left corner of the turntable to eliminate any vibration from the motor or belt affecting the cartridge.The Quintet Black Cartridge. The combination of the Music Hall MMF-9.3 SE with the Ortofon Quintet Black cartridge is an excellent choice for audiophiles seeking ultimate precision and clarity in sound. The MMF-9.3 SE, with its advanced triple-plinth construction and superior vibration isolation, provides stability and quiet operation. The Quintet Black cartridge from Ortofon features a high-quality nude Shibata stylus, which reproduces sound with exceptional detail and transparency.The MMF-9.3 SE also includes an inverted ceramic bearing for silent, smooth operation, a non-resonant 1" thick acrylic platter, high-quality gold RCA connectors, and a detachable phono cable. It also comes with adjustable feet with anti-scratch cups, a built-in spirit level for proper leveling, a dust cover, and a 45 rpm adapter.With an excellent instruction manual and easy assembly, the MMF-9.3 SE is a truly standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckCartridge Ortofon Quintet Black - nude Shibatathe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

The Music Hall MMF-9.3 SE Turntable is an audiophile-grade, two-speed belt-driven turntable featuring a distinctive triple plinth construction that isolates the critical sound reproducing components for the best possible performance. The turntable boasts a classic-looking walnut real wood veneer finish that exudes elegance and sophistication.The MMF-9.3 SE comes equipped with a one-piece full carbon fiber tonearm with a counterweight that is decoupled from the arm and acts as a resonance damper. The completely isolated/decoupled DC motor has 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable to cancel out any potential vibration from the motor/belt to the cartridge.The combination of the Music Hall MMF-9.3 with the Ortofon Quintet Black cartridge is an excellent choice for audiophiles seeking high performance and sound clarity. The Quintet Black is one of the top cartridges in Ortofon's Quintet series, offering exceptional resolution and natural sound reproduction.It also comes with adjustable tip toe feet with anti-scratch cups, a built-in round spirit level for proper leveling, and a dust cover and 45 rpm adaptor. With excellent instruction manual and easy assembly, the MMF-9.3 SE is a true standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckOrtofon Quintet Black mounted and alignedthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

A2 technologyThe A2 continues the success of our fully mechanical automatic turntables. With the A2, you can now select the drop off point for 7“ (singles) or 12“ (LPs) for 45 RPM records. We have also added 78 RPM to the system allowing you to dig back into old shellac collections. To enjoy listening to your A2, just press start and the tonearm automatically moves to the lead in groove of the record. Once playing, the automatics are completely taken out of the equation.And because the automatics are working entirely mechanically – no additional electronics needed – they truly do not influence or degrade sound quality during playback! At the end of the record, the tonearm is automatically brought back and gently lowered into its resting position and the motor shut off.Why sub-chassis?Automatic turntables have many small mechanical parts, which means you need more hollow space in the chassis to fit them. Hollow spaces are the biggest problem as they always reinforce resonances. By using a sub-chassis, you decouple the tonearm and drive from the chassis. In other words, a sub-chassis is a MUST for automatic turntables and enables them to reach excellent sound performance.Improved Automatic MechanismWe have invested in a new aluminium diecast top for the whole sub-chassis and automatic mechanism. We have tried to avoid plastic parts from the original German automatic design as much as possible. This is the first time in all the 50 years of its existance that the original automatic design has received an improvement like this. Due to the new aluminium diecast cover and the massive chassis, the whole sub-chassis construction is more effective and isolates unwanted resonance much better.Massless Tracking Force AdjustmentThe A2 uses a new system for setting the tracking force. As usual, you first level out the tonearm with the damped counterweight. Damping the counter- weight makes the tonearm as a whole more robust and decouples the counterweight from the tonearm reducing resonant frequencies. Afterwards the tracking force is set by turning a dial directly on the tonearm bearing. Not only is this system very fast, precise and efficient, it also keeps the center of gravity directly on top of the bearing center. The spring based anti-skating can also be adjusted directly on the tonearm base.Improved Tonearm & Cardanic Bearing The A2 features an 8.3” ultra-light-mass aluminium tonearm with an improved tonearm tube with bigger diameter. The is a perfect match for the slightly heavier Ortofon 2M Red. In combination we retain the super fast response and all transient detail with lots of fine microdynamics, while the new 2M Red adds a lot of body and musical warmth. The tonearm bearing has received a major upgrade, is now made out of aluminium and features a 4-pin-point cardanic construction with steel tip ball bearings from our own production. This allows for unhindered and free tonearm movement with the lowest amount of friction possible. The A2 will track your vinyl records with the utmost of precision and tightness.Why Ultra-Light-Mass Tonearm?Since forever, there has been this technical discussion about light-weight tonearms with high compliance MM cartridges vs. heavy tonearms with low compliance MC cartridges. Both approaches have advantages and disadvantages and you‘ll find detailed analysis in concerned literature. However, when it comes to automatic turntables, we NEED ultra-light-mass tonearms. There is no way around it. We need the automatic mechanics to be like those in mechanical watches: small and precise. A heavy tonearm would result in a rougher mechanical design as much higher masses have to be moved. Therefore, the A2 reaches performance hights like no other automatic turntable on the market.

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3Α turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3Α comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite ρεδ finish of the MMF-3.3Α is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3Α. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3SE today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Audiophile vertical Plug & Play turntable with wall-mount option!A turntable set-up does not need to be as complicated as rocket-science. Our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set for the included Ortofon OM 5E cartridge. The VT-E BT turntable can be positioned on a table or mounted on a wall.For further ease of use, it comes with a phono pre-amplifier and BT transmitter. So you can easily connect your VT-E BT via BT to any BT speakers or headphones! You can use both BT and RCA output at the same time. VT-E BT is available in black, red or white high gloss colour.

Synergy is a precision engineered integrated turntable with built-in phono stage, factory matched
moving coil cartridge and premium grade audio cables from world class partners, delivering the
ultimate vinyl replay experience without compromise. The MK2 Synergy is equipped with a new highly advanced drive system providing improved speed control, accuracy and stability. Synergy is a precision-made turntable equipped with the highly acclaimed SME Series IV tonearm, Ortofon’s ‘exclusive series’ MC Windfeld Ti cartridge, a custom designed phono stage by NAGRA and mono crystal silver wire by Crystal Cable. The collective sum of these components is award winning and class leading. Integrated and factory configured requiring minimal user set-up. Design is compact, sleek, modern and pure SME with precision engineered components, high attention to detail and crafted from the finest materials to the strictest tolerances. All of which contribute to an extraordinary vinyl listening experience.The MK2 Synergy is a precision turntable of high mass made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis is suspended on an advanced isolation system for primary resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control. The main spindle is 19mm precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation. The platter is machined from aluminium alloy and weighs over 4.6kg. Extensionally dampened with the top surface iso-damp, diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present. Synergy motor conforms to the highest standards of silent running and the turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability.Speed ControlThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet aluminium. A separate mains Power Unit keeps the transformer away from the SCU and importantly separated from the turntable audio signal cables.TonearmThe MK2 Synergy comes equipped with the SME Series IV magnesium tonearm, a precision instrument of extreme quality. Internal audio wiring is premium grade from Crystal Cable.Crystal Cable WiringSynergy is equipped with a premium grade signal cable from Crystal Cable. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 20 is a finely engineered precision turntable. High density construction, extensional damping of major
surfaces and lack of vibration from moving parts ensures exceptional detail, resolution and uncoloured performance.
Equipped with a new highly advanced drive system provides a significant improvement to speed control, accuracy and
stability, making the new generation Model 20 far superior to the highly acclaimed original.The Model 20 has superb instrument quality machining allied with fundamental physics, the higher the mass and stiffness of the body the less it will flex and vibrate; the duration of a vibration is shortened by advanced damping treatment. The Model 20 effortlessly addresses the problems of extraneous vibrations which emanate from numerous sources including air and structural vibration from loudspeakers, groove modulation, stray electrical fields and mechanical energy from moving parts. Weighing 26kg is significant in relation to its size as density matters. The main and sub-chassis plate thicknesses are 16mm and resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The definitive performance Model 20 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 20 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 20 sub-chassis is suspended on 40 purpose made suspension rings meeting all the requirements of high density construction, enabling a detailed resolution and uncoloured performance.DUMPINGA large central fluid-damper disciplines sub-chassis movement with a pleasing sense of security when handling records on the platter, offering a resistive ground-path for acoustic signals. In addition to a cartridge’s electrical output, mirror image acoustic signals reacted in the tonearm and record, will pass into the sub-chassis in the course of dissipation. However, the usual closed loop design does not address the problem of their differing phase, so in the Model 20 the structural interfaces concerned have received special attention to provide paths of the required impedance. This control of vibration is fundamental to the design of the Model 20 and goes a long way to explaining the stunning tonal and dynamic neutrality that it exhibits.PLATTERThe platter is machined from aluminium alloy and weighs 6.5kg. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 20 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

DescriptionMichell's flagship turntable and most would say the worlds best looking.The Michell Orbe turntable takes the established concept of the GyroDec and adds to it an extra level of isolation, better structural damping, and an improved motor drive system. The motor controller employs the revolutionary Never-Connected mains isolation circuit.

DescriptionThe SE is the ‘sport’ version of Michell’s Orbe rangetopper. It cuts down on costs by removing the acrylic casework of its namesake and, in many respects, looks the better for it. Like the well-regarded Gyro, it is a fully suspended design that floats the armboard and platter on three springs, which sit under three posts that stick up from the cast aluminium subchassis that surrounds the platter. Underneath are two acrylic layers in a tristar shape that reach out to support the suspension posts and fix-to-turned aluminium feet.Set up is a matter of adjusting the knurled tops under the three covers, so that the turntable is level without leaving a large gap between the bottom of the subchassis and the tristar. In practice, there isn’t much scope and you need a level support in the fi rst place, because the gap should not exceed a couple of millimetres.The platter looks heavy, but as its made from a mix of vinyl and acrylic, it sits on an inverted bearing and is driven by a round-section rubber belt. The motor housing is the biggest in the group and supports a DC motor that connects to an external power supply that offers speed switching.The Techno Arm is a heavily modified Rega RB250, with silver litz cable, silver plated plugs, cartridge clips and a VTA adjuster. It also features the Tecnoweight, which keeps mass at the same level as the stylus for better tracking and allows incremental downforce adjustment.Sound qualityThis turntable sounds more substantial than its platter feels, but you can’t judge a turntable by mass, it’s design and engineering quality that count and the Orbe SE seems to have both of those down. It has real bottom end weight combined with an open, assured midband that lets instruments and voices through in all their tonal glory. The drawback with many high-mass designs is that they don’t time well because there is a tendency for mass to retain and reflect energy. This turntable avoids that altogether and produces an extremely coherent and right-sounding result.This was a view shared by the panel, who enjoyed the Orbe SE’s fi ne dynamics and full-scale soundstage in which voices and guitars were projected with considerable realism. It garnered favourable comments about its timing, even if leading edges were considered less obvious. It also managed to turn in a very enjoyable rendition of the dub plate, which revealed much of its extension and rhythmic coherence.There were several comments about the quality of piano tone from the listeners, with one describing it as being ‘realistic’ and another as being detailed. The Orbe clearly has a strong and well-defi ned bottom end and this goes a long way to placing a piano solidly on a realistic soundstage.It’s not just about weight either, its also very good with voices, which are well articulated. Allan Taylor’s guitar is also well projected into the room in the context of a full-scale image. Transparency could be greater, as some of the competition reveal, but the Orbe SE balances power and subtlety very effectively. What’s more, it has a breadth of appeal that none of the alternatives could quite match which is impressive to say the least.

DescriptionThe Michell Gyrodec full version is exactly the same as the Gyrodec SE except it has a plinth and dustcover. There are optional upgrades available in the form of the offboard HR power supply, heavyweight platter, and record clamp. Specific arm plates can also be purchased to allow the use of most tonearms.

DescriptionThe Michell Gyrodec full version is exactly the same as the Gyrodec SE except it has a plinth and dustcover. There are optional upgrades available in the form of the offboard HR power supply, heavyweight platter, and record clamp. Specific arm plates can also be purchased to allow the use of most tonearms.

DescriptionThe Gyro SE is a variation of the GyroDec design. Doing away with the full size acrylic plinth and hinged lid of the Gyrodec and replacing them with a single acrylic spyder to support the turntable. This was done to reduce the overall size of the GyroDec and create a smaller more compact turntable.Low contact area feetThe solid aluminium feet of the turntable are shaped so the area in contact with the supporting surface is very small, this is done to minimise the transfer of vibrations from the supporting furniture into the turntable.Three point spring suspension systemThree suspension towers are fixed to the acrylic base to hold the suspension springs in place and provide height adjustment for the sub chassis.Weighted pendulum style sub chassisHanging on the three suspension springs, this provides a rigid dense platform to mount the main bearing, platter and tonearm assembly, ensuring there is no movement between them, while also acting as a ‘resonance / vibration sink’ drawing away unwanted vibrations from the sensitive elements of the turntable.Inverted oil circulating main bearing Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Impedance-matched platter with solid brass weightsThe platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic. The brass weights are added to give the platter extra mass and subsequently more momentum when spinning. This greatly improves speed stability and helps keep wow and flutter to a minimum.Free standing motor unitThe motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

DescriptionThe Gyro SE is a variation of the GyroDec design. Doing away with the full size acrylic plinth and hinged lid of the Gyrodec and replacing them with a single acrylic spyder to support the turntable. This was done to reduce the overall size of the GyroDec and create a smaller more compact turntable.Low contact area feetThe solid aluminium feet of the turntable are shaped so the area in contact with the supporting surface is very small, this is done to minimise the transfer of vibrations from the supporting furniture into the turntable.Three point spring suspension systemThree suspension towers are fixed to the acrylic base to hold the suspension springs in place and provide height adjustment for the sub chassis.Weighted pendulum style sub chassisHanging on the three suspension springs, this provides a rigid dense platform to mount the main bearing, platter and tonearm assembly, ensuring there is no movement between them, while also acting as a ‘resonance / vibration sink’ drawing away unwanted vibrations from the sensitive elements of the turntable.Inverted oil circulating main bearing Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Impedance-matched platter with solid brass weightsThe platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic. The brass weights are added to give the platter extra mass and subsequently more momentum when spinning. This greatly improves speed stability and helps keep wow and flutter to a minimum.Free standing motor unitThe motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

Description The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a popup stylus target light; and a removable hinged dust cover.Direct-Drive with High-Torque Motor: Turntable Designed for DJsThis high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.Plays 33-1/3 RPM, 45 RPM and 78 RPM RecordsDirect-Drive with High-Torque MotorS-Shaped TonearmAT-XP3 Dual Magnet™ Phono CartridgeFully Manual Operation: Take ControlWhether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.Cartridge Assembly Line Circa 1962: Analog Expertise Spanning More Than 55 YearsWe got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

The Audio-Technica AT-LP140XP is a professional direct-drive DJ turntable that combines scratch and mixing performance with hi-fi sound. Its high-torque motor, heavy damped platter and robust build make it reliable in the club, on stage and at home.It comes ready to play with the AT-XP3 DJ cartridge on an AT-HS6 headshell, three speeds, forward/reverse play and pitch up to ±24%.

The Audio-Technica AT-LP120XBT-USB is a fully manual direct-drive turntable that combines the classic design of professional turntables with modern connectivity. Listen to your records wirelessly over Bluetooth, through an amplifier or powered speakers, or digitise them on your computer via USB.It comes with an AT-VM95E cartridge with elliptical stylus, a balanced S-shaped tonearm and three speeds (33⅓, 45 and 78 RPM), for anyone who wants a turntable with more control and room to upgrade.

The Model 60 is the most technically advanced SME turntable ever made, evolved from 75 years of engineering
excellence, innovation and perfection, delivering precise and pure audio reproduction. Extremely high build quality, close tolerance precision engineered componentry, striking design and a range of none painted uniquely engineered finishes.Introduced 60 years after SME entered the elite high end audio world, the Model 60 is far superior than the highly credible Model 30 which has been the reference precision turntable for over 3 decades. The new flagship is an entirely new turntable design with clever engineering and technological advancement. Design features include: de-coupled adjustable feet with multipoint isolation, an intelligent suspended suspension system with horizontal and vertical control, hydraulically dampened main bearing, acoustically treated main chassis, sub-chassis and platter, sophisticated new generation drive system with highly accurate speed control, AC motor and independent power transformer. The Model 60 is equipped with the new Series VA tonearm which is an advanced version of the famous Series V tonearm which has been extensively sonically improved by use of a non-metallic tonearm CNC machined from an advanced polymer resin material with high density and high rigidity properties. The Series VA tonearm tube is acoustically inert with a significantly reduced resonance signature, optimised effective mass and a wide cartridge balance weight rangeTest ResultsTurntable Speed Error at 33.33rpm: 33.33rpm (-0.005%)Time to Audible Stabilisation: 5 – 6 seconds
PeakWow/Flutter (Peak wtd): 0.01% / 0.02%Rumble (silent groove, DIN B wtd): -75dB (-75.4 dB with Clamp)Rumble (through bearing, DIN B wtd): -76.5dBHum & Noise (unwtd, rel to 5cm/sec): -62.5dBPower Consumption: 18w (1w standby)Drive System & Speed RangeThe turntable is driven by a custom made bi-phase AC synchronous motor. The speed control unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The output driver stage is a 2 channel, class AB Bi-polar design with low distortion and relay coupled directly to the motor. The entire design is implemented using high quality surface mount technology on a gold plated FR4 PCB. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder.

Experience sophisticated sound with the Music Hall MMF Mark 1 turntable. Music Hall founder, Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark 1 is no exception!Featuring an all-new tonearm design, the Mark 1 delivers exceptional rigidity and internal damping, with a precision aluminum headshell, CNC-machined tonearm flange, and fully adjustable VTA – a feature almost never seen in this price-range. The magnetic anti-skating feature and factory-set pre-adjusted and fixed counterweight make setup a breeze.The Mark 1 also boasts a high-quality, super-fast, and dynamic low mass Ortofon OM 5E cartridge, perfectly matched to the characteristics of the tonearm, creating a beautiful, full-bodied sound that until now has been impossible to achieve in a budget turntable. With the Music Hall MMF Mark 1, you can enjoy premium audio performance without compromise.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellhigh quality Ortofon OM 5E cartridge properly aligned and mountedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package) 5.5kglow noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover. The combination of the Music Hall MMF 11.3 with the Ortofon Cadenza cartridge is an excellent choice for audiophiles seeking high sound quality and precision. The Ortofon Cadenza, especially the Cadenza Black model, is renowned for its exceptional clarity, frequency reproduction accuracy, and sound transparency.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorsOrtofon Cadenza Black pre-installed and calibratedcounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover. The combination of the Music Hall MMF 11.3 with the Ortofon Cadenza cartridge is an excellent choice for audiophiles seeking high sound quality and precision. The Ortofon Cadenza, especially the Cadenza Black model, is renowned for its exceptional clarity, frequency reproduction accuracy, and sound transparency.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorsOrtofon Cadenza Black pre-installed and calibratedcounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF-9.3 SE Turntable is an audiophile-grade, two-speed belt-driven turntable featuring a distinctive triple plinth construction that isolates the critical sound reproducing components for the best possible performance. The turntable boasts a classic-looking walnut real wood veneer finish that exudes elegance and sophistication.The MMF-9.3 SE comes equipped with a one-piece full carbon fiber tonearm with a counterweight that is decoupled from the arm and acts as a resonance damper. The completely isolated/decoupled DC motor has 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable to cancel out any potential vibration from the motor/belt to the cartridge.In addition to the optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus, the MMF-9.3 SE includes an inverted ceramic main bearing for super quiet, fluid operation, a non-resonant 1” thick acrylic platter, and high-quality gold RCA connectors and detachable phono cable. It also comes with adjustable tip toe feet with anti-scratch cups, a built-in round spirit level for proper leveling, and a dust cover and 45 rpm adaptor. With excellent instruction manual and easy assembly, the MMF-9.3 SE is a true standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Elevate your music experience with the Music Hall MMF-7.3 Turntable. This exceptional turntable boasts a unique dual-plinth construction, which minimizes unwanted resonance and vibrations for the most accurate sound reproduction possible.Featuring a one-piece full carbon fiber tonearm and fully adjustable VTA, azimuth, and dampened arm lift mechanism, the MMF-7.3 allows for precise tracking and retrieval of musical nuances. The turntable's counterweight's center of gravity is level with the stylus tip, reducing unwanted resonances and vibrations and acting as a resonance damper for superior sound quality.The MMF-7.3 comes with an Ortofon 2M Bronze cartridge with a nude fine line stylus, properly aligned and mounted for the highest quality playback possible. The precision stainless steel main bearing sheathed in Teflon ensures noise-free, fluid operation, while the non-resonant acrylic platter with metal screw-on record clamp and soft felt mat provide exceptional stability and record coupling for improved playback.Experience music like never before with the Music Hall MMF-7.3 Turntable. With its exceptional design, cutting-edge tonearm technology, and superior cartridge options, this turntable is a must-have for any music enthusiast.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckOrtofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Elevate your music experience with the Music Hall MMF-7.3 Turntable. This exceptional turntable boasts a unique dual-plinth construction, which minimizes unwanted resonance and vibrations for the most accurate sound reproduction possible.Featuring a one-piece full carbon fiber tonearm and fully adjustable VTA, azimuth, and dampened arm lift mechanism, the MMF-7.3 allows for precise tracking and retrieval of musical nuances. The turntable's counterweight's center of gravity is level with the stylus tip, reducing unwanted resonances and vibrations and acting as a resonance damper for superior sound quality.The MMF-7.3 comes with an Ortofon 2M Bronze cartridge with a nude fine line stylus, properly aligned and mounted for the highest quality playback possible. The precision stainless steel main bearing sheathed in Teflon ensures noise-free, fluid operation, while the non-resonant acrylic platter with metal screw-on record clamp and soft felt mat provide exceptional stability and record coupling for improved playback.Experience music like never before with the Music Hall MMF-7.3 Turntable. With its exceptional design, cutting-edge tonearm technology, and superior cartridge options, this turntable is a must-have for any music enthusiast.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckOrtofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3 turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3 comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite red finish of the MMF-3.3 is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3 today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3 turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3SE comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite white finish of the MMF-3.3 is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3 today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Meet the Music Hall MMF-2.3 turntable, the perfect mix of beauty and precision. With a top tier 8.6” carbon fiber tonearm and vibration damping adjustable feet, the MMF-2.3 is an excellent choice for any music lover. This table boasts a low noise fully manual belt-drive design, a separately isolated DC synchronous motor, and two-speed stepped motor pulley for 33 1⁄3 and 45 rpm. The included music hall Spirit moving-magnet cartridge with replaceable elliptical stylus has been properly aligned and mounted for superior sound.Constructed with high-quality components, the MMF-2.3 focuses on the critical components: bearing, motor, and tonearm, for quiet, fluid operation. The high precision stainless steel and bronze bearing assembly ensures accurate speed and stability, while the full-size alloy platter and felt mat deliver optimal sound. The tonearm is fully adjustable for VTA and azimuth, with a 4-point gimbal bearing assembly using ultra-precision ABEC bearings. The MMF-2.3 even includes detachable phono cables and a dust cover.Not only does the MMF-2.3 turntable offer amazing performance, but it also comes in three stunning finishes: Gloss White, Gloss Black, and Ferrari Red. Quick and easy to assemble, this table is perfect for anyone looking for a high-quality, easy-to-use turntable that delivers an outstanding listening experience. Don't wait, get your hands on the Music Hall MMF-2.3 turntable today and take your vinyl listening to the next level.including phono-preamp Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

DescriptionTHORENS is expanding its range and is presenting another fully automatic turntable for all vinyl fans with the brand-new modelThe TD 101 A is the little brother of the TD 102A and open a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanics of the TD 101 A guarantee the lowest possible frictional resistance of all mechanical components.The turntable comes with a newly developed aluminum tonearm, including the preassembled AT 3600 cartridge from Audio Technica. The switchable integrated phono preamplifier guarantees complete connectivity with all modern audio systems.

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF-9.3 SE Turntable is an audiophile-grade, two-speed belt-driven turntable featuring a distinctive triple plinth construction that isolates the critical sound reproducing components for the best possible performance. The turntable boasts a classic-looking walnut real wood veneer finish that exudes elegance and sophistication.The MMF-9.3 SE comes equipped with a one-piece full carbon fiber tonearm with a counterweight that is decoupled from the arm and acts as a resonance damper. The completely isolated/decoupled DC motor has 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable to cancel out any potential vibration from the motor/belt to the cartridge.In addition to the optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus, the MMF-9.3 SE includes an inverted ceramic main bearing for super quiet, fluid operation, a non-resonant 1” thick acrylic platter, and high-quality gold RCA connectors and detachable phono cable. It also comes with adjustable tip toe feet with anti-scratch cups, a built-in round spirit level for proper leveling, and a dust cover and 45 rpm adaptor. With excellent instruction manual and easy assembly, the MMF-9.3 SE is a true standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly