Rode

WIRELESS GO Velcro Pouch

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording appAvailable in black or white

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording appAvailable in black or white

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording appAvailable in black or white

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording appAvailable in black or white

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording appAvailable in black or white

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording app

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.Ultra-compact wireless microphone for smartphones – available with either USB-C or Lightning connectionIn-built microphones and automatic pairing – incredibly easy to useReceiver connects directly to a smartphone with no cables requiredIntelligent GainAssist technology for perfect audio every timeUp to 21 hours battery life with included charging caseUltra-compact, ultra-lightweight design for discreet on-camera presenceIntegrated windshields and additional furry windshields for clear outdoor recordingsWorks with free RODE Capture video recording app

"Fur" windscreen for the first generation RODE Wireless GO wireless system.Plastic clips provide secure fixation of the windscreen on the transmitter

Wind protection on the RODE Wireless GO IIThe package contains 1 pcs

WIRELESS GO II CHARGE CASEThe Charge Case is a handy charging case for the Wireless GOII. It accommodates both transmitters and the receiver and features an integrated battery that facilitates two full recharges of the system for up to 21 hours of continuous use. With a rugged enclosure and zip system, it is also perfect for protecting the Wireless GO II when in transit or storage.Key Features:Custom charging case for the Wireless GO IIAccommodates two transmitters and a receiverFacilitates three full recharges of the system for up to 30 hours of useRugged enclosure and zip system for protection in transit or storageCharging status LED

The Charge Case+ is a compact case for the Wireless GO (Gen 3) that keeps the entire system safe and secure when storing or taking it out on the road. It features an integrated battery that delivers two full recharges for up to 21 hours of use and allows simultaneous data access to the complete system for transferring recordings, adjusting settings and updating firmware. FeaturesCharging Case for Wireless GO (Gen 3)Simultaneous charging of both transmitters and receiverFacilitates two full recharges for up to 21 hours of useProvides access to all units for transferring recordings or adjusting settingsAccommodates two transmitters and a receiver

Ultra-Compact Wireless Transmitter for Professional Audio CaptureThe RODE Wireless GO II TX is a versatile wireless transmitter designed for content creators seeking high-quality audio in a compact form factor. Ideal for interviews, vlogging, and mobile filmmaking, it offers flexibility with its built-in omnidirectional microphone and 3.5mm input for external microphones.Onboard Recording for Reliable Audio BackupEquipped with over 40 hours of onboard recording capability, the Wireless GO II TX ensures that your audio is safely captured, even in challenging wireless environments. This feature provides peace of mind, knowing that your recordings are secure regardless of transmission reliability.Seamless Integration with RØDE EcosystemThe Wireless GO II TX integrates effortlessly with other RØDE products, such as the Wireless GO II RX, Wireless ME RX, RØDECaster Pro II, RØDECaster Duo, and Streamer X. This compatibility allows for a cohesive audio setup, enhancing your recording experience.Key FeaturesBuilt-in Omnidirectional Microphone: Captures clear audio from all directions.3.5mm TRS Input: Allows connection of external microphones for added flexibility.Onboard Recording: Stores over 40 hours of audio internally for backup.Series IV 2.4GHz Digital Transmission: Provides secure and reliable wireless audio with 128-bit encryption.200m Transmission Range: Ensures clear audio capture over long distances (line of sight).Rechargeable Lithium-Ion Battery: Offers up to 7 hours of continuous use.USB-C Connectivity: Facilitates charging, firmware updates, and file transfer.Compact Design: Lightweight and portable for easy mounting or clipping.Compatibility: Works with RØDE Series IV receivers and other RØDECaster devices.

Professional Dual-Channel Wireless System The RODE Wireless PRO is a flagship wireless microphone system engineered for professional creators, filmmakers, and broadcast applications. Combining premium sound quality with advanced functionality, it delivers total flexibility and reliability for any production environment.Studio-Grade Sound with Onboard Recording Each transmitter features 32-bit float onboard recording with 32GB of internal memory, providing over 40 hours of backup audio. This ensures you never lose a take — even in challenging environments or when wireless interference occurs.Precision Sync and Intelligent Control The Wireless PRO includes a built-in timecode generator for seamless synchronization between audio and video, making it ideal for multi-camera setups. With Intelligent GainAssist, safety channel recording, and comprehensive level controls, you can capture perfectly balanced audio every time.Ultimate Connectivity and Performance Powered by RODE’s Series IV 2.4GHz digital transmission with 128-bit encryption, the Wireless PRO provides crystal-clear audio up to 260 meters (line of sight). Dual analog and digital outputs ensure compatibility with cameras, smartphones, computers, and more — all while offering flexible monitoring and charging via USB-C.Key FeaturesDual-channel wireless microphone system (2 transmitters + 1 receiver)32-bit float onboard recording with 32GB internal memory per transmitterBuilt-in timecode generator for perfect AV syncSeries IV 2.4GHz digital transmission with 128-bit encryptionUp to 260m range (line of sight)Intelligent GainAssist and safety channel optionsAnalog 3.5mm TRS and digital USB-C outputsHeadphone monitoring with adjustable levelsLocking 3.5mm lavalier inputs on transmittersUp to 7 hours of battery life + smart charging case includedIncludes Lavalier II microphones, MagClip GO, windshields, and accessoriesWorks with RODE Central app for setup, monitoring, and firmware updates

Dual Wireless System for Effortless Content Creation The RODE Wireless ME Dual is a versatile two-transmitter wireless microphone system that makes capturing professional-quality audio easier than ever. Designed for creators, filmmakers, and interviewers, it offers studio-grade sound in a simple, compact, and highly portable setup.Record Two Voices at Once With two transmitters and one receiver, the Wireless ME Dual allows you to record two speakers simultaneously — perfect for interviews, podcasts, and collaborative videos. Both transmitters feature built-in microphones, and the receiver also includes its own mic, enabling you to capture your voice behind the camera as well.Plug-and-Play Convenience Featuring automatic pairing, intuitive controls, and no complicated setup, the Wireless ME Dual is ideal for beginners and professionals alike. It connects seamlessly to cameras, smartphones, and computers via 3.5mm TRS or USB-C, providing crystal-clear, broadcast-quality sound instantly.Reliable Wireless Performance Powered by RODE’s advanced Series IV 2.4GHz digital transmission with 128-bit encryption, the Wireless ME Dual ensures stable, high-fidelity audio with a range of up to 100 meters (line of sight). Whether indoors or outdoors, it delivers consistent, drop-out-free performance.Key FeaturesDual-channel wireless microphone system (2 transmitters + 1 receiver)Built-in microphones in both transmitters and receiver for flexible recordingSeries IV 2.4GHz digital transmission with 128-bit encryptionUp to 100m range (line of sight)USB-C and 3.5mm TRS connectivityPlug-and-play operation — no setup requiredCompatible with cameras, smartphones, tablets, and computersWorks with RODE apps for advanced configuration and recordingRechargeable lithium-ion batteries with up to 7 hours of runtimeCompact, lightweight design for easy on-the-go use

Compact Dual-Channel Wireless Receiver The RODE Wireless GO II RX is a sleek, ultra-compact dual-channel receiver designed for professional audio capture in a wide range of applications. Perfect for creators, filmmakers, and podcasters, it delivers broadcast-quality sound while maintaining effortless portability.Versatile Connectivity and Compatibility With both analog 3.5mm TRS and digital USB-C outputs, the Wireless GO II RX integrates seamlessly with cameras, computers, and mobile devices. Whether you’re recording in the studio or on the move, it provides a simple plug-and-play solution for capturing crystal-clear audio.Reliable Wireless Performance Utilizing Series IV 2.4GHz digital transmission with 128-bit encryption, the RX ensures a stable, interference-free connection up to 200 meters (line of sight). This makes it ideal for dynamic shooting environments, outdoor interviews, and live productions.Intuitive Control and Monitoring The bright LCD display and onboard controls allow users to monitor levels, battery status, and signal strength at a glance. Paired with the RODE Central app, it offers advanced configuration options such as gain control, safety channel recording, and firmware updates.Key FeaturesUltra-compact dual-channel wireless receiverSeries IV 2.4GHz digital transmission with 128-bit encryptionUp to 200m range (line of sight)3.5mm TRS analog and USB-C digital outputsCompatible with cameras, smartphones, tablets, and computersBuilt-in rechargeable lithium-ion batteryEasy pairing with RODE Wireless GO II transmittersOLED display for real-time monitoringAccess advanced settings via RODE Central app

Ultra‑compact Wireless Transmitter for Content Creators The Wireless ME TX is designed to make capturing professional‑quality wireless audio effortless — ideal for makers, mobile journalists, vloggers and presenters. Clip it on and record confidently without complicated setup.Built‑in Mic or External Lav: Total Flexibility With a high‑quality omnidirectional built‑in mic and a 3.5 mm TRS input for external lavaliers or VideoMics, the TX gives you flexible options. Whether you’re grabbing spontaneous audio or mounting a lav, the device adapts seamlessly.Smart Gain & Reliable Wireless Link Featuring the “GainAssist” automatic‑level system, the Wireless ME TX handles real‑world audio levels intelligently — so you get clear sound without constant monitoring. The 2.4 GHz Series IV wireless transmission ensures robust connectivity and easy pairing with compatible receivers.Compact, All‑Day Power for On‑the‑Go Use At just ~32 g and roughly 44 × 45 × 18 mm, this TX fits discreetly on clothing or gear. It delivers up to 7 hours of battery life on a full charge via USB‑C — long enough for a full day of shooting.Key FeaturesBuilt‑in omnidirectional microphone plus external lav/VideoMic input (3.5 mm TRS)Series IV 2.4 GHz digital wireless transmission with long line‑of‑sight range (100+ m)Intelligent GainAssist automatic level controlBattery life: up to ~7 hours (internal Li‑ion, USB‑C)Frequency response: ~50 Hz – 20 kHzMax SPL of built‑in mic: ~122 dB SPLWeight: ~32 gCompact dimensions: ~44 × 45.3 × 18.3 mmRequires a compatible Series IV receiver for full functionality

Professional‑Grade Receiver for Broadcast‑Level Wireless Audio The RØDE Wireless PRO RX is the high‑performance receiver you pair with PRO transmitters to capture crystal‑clear wireless audio for cameras, mobile devices and computers. Rugged yet compact, it’s designed to fit seamlessly into the workflow of filmmakers, content creators and audio professionals.Seamless Integration & Flexible Output Options With both a 3.5 mm TRS analogue output and USB‑C digital output, the RX connects easily to cameras, smartphones and computers. Its custom gain presets and routing options allow you to tailor the output for your device. Monitoring is built in, so you’ll always hear the audio as it’s recorded.Reliable Wireless Link with Pro Features The RX uses a 2.4 GHz Series IV digital link with 128‑bit encryption for ultra‑stable performance and long range (up to approx. 260 m line of sight). It supports time‑code sync, safety‑channel recording and seamless auto‑pairing with transmitters — giving you confidence in any production environment.Compact, Travel‑Ready Design Built for Pro Use At approximately 35 g and measuring around 46.5 × 44 × 20 mm, the RX is lightweight and mountable on gear, cold shoes or hidden on‑belt. With up to ~7 hours battery life, it supports full‑day shoots — and paired with the smart charging case you can extend runtime further.Key FeaturesAnalogue output: 3.5 mm TRS with adjustable pad/gain presetsDigital output: USB‑C (audio + data)2.4 GHz Series IV wireless transmission, 128‑bit encryptionRange: Up to ~260 m line of sightBuilt‑in routing options and gain presets for different devicesTime‑code sync capability for multi‑camera/audio setupsMonitoring: Headphone output / level displayBattery life: Up to ~7 hours on internal Li‑ion batteryDimensions: Approx. 46.5 × 44 × 20 mmWeight: Approx. 35 gCompatible with PRO series transmitters (TX) and entire RØDE PRO ecosystem

Broadcast-Quality Audio in a Compact Transmitter The RØDE Wireless PRO TX delivers pro-grade wireless audio in a lightweight form, featuring a built-in microphone, secure lavalier input, and extended range — perfect for filmmakers, content creators, and broadcasters.Built-in 32-Bit Float Recording with Timecode Sync Capture worry-free audio with onboard 32-bit float recording and timecode support. Even if the wireless connection drops, you’ll have a flawless backup ready to sync.High-Performance Wireless Link with Locking Input With 2.4 GHz digital transmission and 128-bit encryption, the Wireless PRO TX offers rock-solid connectivity up to 260 m (line of sight). The 3.5 mm TRS input is locking, keeping lavaliers secure on the move.Durable, Lightweight, and Ready for Anything Small enough to clip discreetly, rugged enough for demanding shoots — the TX is built for creators who need reliable audio on the go, with 7+ hours of battery life and flexible charging via USB-C or charging case.Key FeaturesBuilt-in omnidirectional microphoneLocking 3.5 mm TRS input for lavalier microphones32-bit float onboard recording with 32 GB internal memoryTimecode support for precise AV sync2.4 GHz digital Series IV wireless transmissionRange: Up to 260 m (line of sight)Intelligent GainAssist with safety channelBattery life: ~7 hours (USB-C rechargeable)Weight: ~35 gDimensions: 46.5 × 44 × 20 mmCompatible with RØDE Wireless PRO RX and ecosystem

Compact Receiver for On-Camera & Mobile Use The RØDE Wireless GO RX is a sleek, ultra-lightweight receiver that pairs seamlessly with a Wireless GO transmitter to deliver professional-grade wireless audio in a minimal footprint.Mount Anywhere, Connect Anywhere With a dual-purpose clip that attaches to your camera’s cold shoe or clips to clothing, the RX routes audio via its 3.5 mm TRS output and includes a three-stage pad (0 dB / –6 dB / –12 dB) for matching levels with your recorder or camera.Stable Wireless Link with Smart Gain Control Using RØDE’s Series III 2.4 GHz digital link (with 128-bit encryption), the RX ensures stable reception. Built-in gain control helps you dial in the right level and the unit powers up fast — pairing with the TX in seconds.Built to Travel, Built to Last Weighing just ~ 31 g and measuring 44 × 46.4 × 18.5 mm, the RX is built for compact setups. Its internal battery delivers up to 7 hours of continuous use on a single charge via USB‑C.Key FeaturesDual‑purpose mount: clips to clothing or slides into camera shoeOutput: 3.5 mm TRS with switchable pad (0 dB / –6 dB / –12 dB)Wireless link: Series III 2.4 GHz digital, 128‑bit encryptionLine-of-sight range up to 70 mOnboard battery: up to 7 hours runtimeUltra-compact and lightweight: ~ 31 gFast auto-pairing with RØDE transmittersUSB‑C for charging and firmware updatesCompatible with Wireless GO transmitters and lavalier mic setups

Compact Wireless Audio with Broadcast Quality The RØDE Wireless GO TX is an ultra-compact wireless transmitter with a built-in broadcast-grade microphone, delivering crystal-clear audio in a portable form ideal for content creators, videographers, and journalists on the go.Versatile Mounting & Flexible Input Options Clip it to your talent’s clothing using the integrated clip or mount it discreetly on gear. The TX features a built-in omnidirectional mic for quick setups and a 3.5 mm TRS input for external lavaliers like the RØDE Lavalier GO.Reliable Wireless Performance in Any Environment Using RØDE’s Series IV 2.4 GHz digital transmission with 128-bit encryption, the Wireless GO TX ensures stable, dropout-free audio at distances up to 200 m (line of sight), even in congested RF environments.Built-In Recording and Long Battery Life With internal memory for over 40 hours of onboard recording and a rechargeable battery offering up to 7 hours of use, you’ll never miss a take — even if your receiver isn’t rolling.Key FeaturesBuilt-in broadcast-grade omnidirectional microphone3.5 mm TRS input for external lavalier mics2.4 GHz digital transmission with 128-bit encryptionUp to 200 m range (line of sight)Internal recording: 40+ hoursUSB-C charging and data transferBattery life: Up to 7 hoursCompact design: 44 × 45.3 × 18.3 mm, ~30 gCompatible with Wireless GO and Wireless GO II receiversLED status display and mute function

A Completely New BeastThis is not simply an evolution of the original RODECaster Pro; it is something new entirely. Packed with revolutionary next-generation features, it's the world's most powerful audio solution for not just podcasters, but all creators.Content Creation Made Easy  Whether it's for streaming, podcasting, or making music, the RODECaster Pro II makes recording incredible audio incredibly easy. Every component has been painstakingly crafted to simplify the audio production process, combining tens of thousands of dollars' worth of studio equipment into a single user-friendly console. Exceptional Audio, AlwaysFrom the high-quality Neutrik combo jacks and groundbreaking Revolution Preamps, to the studio-grade APHEX processing and our innovative VoxLab processing editor, the RODECaster Pro II delivers exceptional audio quality for any recording application. Endless Customisation, Unmatched Connectivity The RODECaster Pro II is fully customisable. Everything from the SMART pads to the mixer can be configured to suit any creative vision. And with unrivalled connectivity options unlocking more streamlined workflows and easier integration with other equipment than ever before?, it's the perfect audio control centre for any creator's setup.

A Completely New BeastThis is not simply an evolution of the original RODECaster Pro; it is something new entirely. Packed with revolutionary next-generation features, it's the world's most powerful audio solution for not just podcasters, but all creators.Content Creation Made Easy  Whether it's for streaming, podcasting, or making music, the RODECaster Pro II makes recording incredible audio incredibly easy. Every component has been painstakingly crafted to simplify the audio production process, combining tens of thousands of dollars' worth of studio equipment into a single user-friendly console. Exceptional Audio, AlwaysFrom the high-quality Neutrik combo jacks and groundbreaking Revolution Preamps, to the studio-grade APHEX processing and our innovative VoxLab processing editor, the RODECaster Pro II delivers exceptional audio quality for any recording application. Endless Customisation, Unmatched Connectivity The RODECaster Pro II is fully customisable. Everything from the SMART pads to the mixer can be configured to suit any creative vision. And with unrivalled connectivity options unlocking more streamlined workflows and easier integration with other equipment than ever before?, it's the perfect audio control centre for any creator's setup.

The PodMic is a broadcast-quality dynamic microphone optimised for incredible performance in podcasting, livestreaming, and other speech or vocal applications. Offering a rich, full-bodied sound, with an internal pop filter for minimising plosives, internal shockmount for reducing vibrations, and a swing mount for easy positioning, the PodMic will take your content to the next level.Key FeaturesBroadcast-quality dynamic microphoneRich, detailed sound optimised for podcasting, livestreaming and other speech applicationsInternal pop filter, shock mount and integrated swing mountRobust all-metal construction

The RODECaster Duo is a compact and incredibly powerful all-in-one audio production solution for podcasters and content creators. It features two high-quality Neutrik® combo inputs for connecting microphones, instruments or line-level devices, a 3.5mm TRRS headset input, and integrated wireless receiver for connecting RODE wireless microphones, making it incredibly versatile. Ultra-low-noise, high-gain Revolution Preamps™ and studio-grade APHEX® audio processing delivers pristine audio quality, with dual USB-C interfaces for connecting two computers or mobile devices and Bluetooth connectivity for seamless phone call integration. The RODECaster Duo is fully customisable, with seven individually assignable channels and six programmable SMART pads for on-the-fly triggering of sound or voice FX and other actions.Key Features:Fully integrated audio production studio for podcasters and content creatorsUltra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain)Two high-quality Neutrik® combo inputs for connecting microphones, instruments or line-level devicesSeven individually assignable channels with four broadcast-quality physical faders and three virtual fadersBuilt-in wireless receiver for connecting up to two RODE Series IV transmitters (including Wireless PRO, Wireless GO II and Wireless ME)High-performance quad-core audio engineStudio-grade APHEX® audio processing and on-board effectsSix fully programmable SMART pads with bank switching3.5mm TRRS input for connecting headphones and headsetsDual USB-C interfaces for connecting two computers or mobile devicesAdvanced Bluetooth® connectivity for high-quality phone call integrationMultitrack or stereo recording to a microSD™ card, USB storage device or computerTwo high-power headphone outputs, one TRRS headset output and two balanced ?-inch line outputs5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and controlDesigned and made in RODE’s state-of-the-art facilities in Sydney, Australia

The RØDE NTH-100 professional over-ear headphones offer exceptional sonic performance and superior comfort that inspires creativity. Featuring custom-matched drivers that deliver an incredibly accurate frequency response and ultra-low distortion, and a precision-engineered acoustic design optimised for exceptional detail and clarity, they are ideal for all forms of content creation, including music production, mixing and audio editing, podcasting, streaming and location recording. Luxurious Alcantara® cushions with our revolutionary CoolTech™ gel ensure maximum comfort, particularly for long-format content creation, and the fully adjustable headband with our innovative FitLok™ locking system provides the perfect fit every time. Your search for the perfect headphones is over.Audio as it's Meant to Be HeardThe NTH-100s are meticulously crafted to deliver exceptional sonic performance for critical listening, from monitoring to mixing to mastering. Featuring custom-matched dynamic drivers that have been painstakingly tuned for an incredibly accurate frequency response and extremely low distortion, they are remarkably natural-sounding headphones. These qualities are further enhanced by the unique contoured earcup construction, which is optimised to ensure exceptional detail and clarity, and memory foam cushions for excellent passive noise isolation. They are precision-crafted to retain every detail and every nuance of sound they produce. In other words, audio as it’s meant to be heard.Incredible Accuracy, Exceptional ClarityThe NTH-100 drivers feature a custom voice coil with a four-layer ultra-high-tension aluminium alloy at its core, which is coupled to an ultra-stiff triple-layer Mylar® diaphragm. Combined with a rare-earth neodymium magnet and innovative phase plug inspired by the award-winning NTG5 microphone, these high-grade components ensure an accurate frequency and phase response across the whole audible spectrum for an incredibly articulate listening experience.Style in a Class of its OwnThe perfect marriage of classic aesthetics and cutting-edge industrial design, the NTH-100s are instantly iconic. With clean lines and sleek, high-grade finishes, including the unique ergonomic earcup design and premium Alcantara® cushions, they look as good as they feel. Customise the NTH-100s to suit your style, with high-quality cables available in four vibrant colours: pink, green, blue and orange (matched to the channels of the RØDECaster Pro and RØDE Connect). Available in 1.2m (3′11″) and 2.4m (7′10″) variants.Built For Creative EnduranceThe NTH-100s are built to withstand the rigours of creating day in, day out. Every component is designed to endure, from the high-strength spring steel headband with its scratch-resistant coating to the highly durable Alcantara® cushions to the locking cable connectors. The cushions and cable are also user replaceable. This modular design ensures maximum longevity, even with vigorous daily use. Every pair is designed and made in RØDE’s precision facilities in Sydney, Australia using high-grade materials, so you can take on any creative endeavour knowing they’ll be with you for the long-haul.

Bάση Μικροφώνου ιδανικό για Broadcast δραστηριότητα

Professional-grade windshield designed to minimise wind noise and plosives when used in conjunction with the RODE VideoMic NTG microphone.Diameter: 85 mmLength: 125 mmWeight: 21g

The Wireless GO Gen3 is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssisttechnology and 32-bit float on-board recording with 32 GB of internal memory. RODE’s state-of-the-art Series IV 2.4GHz digital transmission delivers best-in class range, with broadcast-grade in-built microphones for crystal-clear audiocapture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver forheadphone monitoring or audio input.Dual-channel compact wireless microphone systemRODE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio with bestin-class rangeUniversal compatibility with cameras, smartphones and computers32-bit float on-board recording allows for the recovery of clipped or quiet audio filesIntelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera32GB of storage on each transmitter for over 40 hours of backup recordingsLocking 3.5mm TRS connectors for complete securityHeadphone monitoring with on board level controlPlug-in power detect for extended battery lifeEasy configuration on a computer or smartphone via RODE CentralDesigned and made in RODE’s precision facilities in Sydney, Australia

Small in structure, huge in soundFit for any challenges in the studio or on stage, the SE8 is a brand new high-performance handcrafted small-diaphragm condenser, fresh from the labs at SE.Recommended useAcoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH.Highlights: Hand-made capsule & all-metal buildBalanced sound & sophisticated backplate designPerfect for sources like high-hats and drum overheadsOne of the quietest small-capsule mics on the planetHighest dynamic range and SPL handling in its classIntegrated attenuation pads and low-cut filters

A compact & classy condenserThe SE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.Recommended useAcoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH.Highlights:Optimized acoustic design, discrete class-A circuitry and a transformerless outputClear, natural sound quality at all frequenciesSwitchable -20dB attenuation padHigh sound pressure level (SPL) handling capabilitySwitchable low-cut 80 Hz filterExtremely low-noise components

Βάση μικροφώνου σε μαύρο χρώμα με αρθρωτό βραχίονα για στήριξη σε επίπεδη επιφάνεια. Μέγιστο μήκος 820mm καιμέγιστο ύψος 840mm. Μπορεί να στηριχτεί σε επιφάνειες με μέγιστο πάχος 55mm ή 70mm (ανάλογα με τη βάση που θα επιλέξουμε) και υποστηρίζςει μικρόφωνα με βάρος από 700gr μέχρι και 1.1kg. Η αντικαδασμική βάση δεν συμπεριλαμβάνεται στην τιμή αλλά πρέπει να συνυπολογιστεί στον υπολογισμό του συνολικού βάρους.