Martin Audio

The HTKCT04 from Martin Audio is a steel mounting pole for BlacklineX and BlacklineX Powered loudspeakers and subwoofers.

The VIA2004 is an advanced 4-channel power amplifier which delivers superb audio performance in a lightweight, cost-effective package. Delivering 4×500 watts into 4 ohms, it is ideal for powering O-Line, ADORN and CDD Series installations in bars, auditoriums and HoW, as well as small-medium scale portable sound reinforcement and club use.FeaturesFour channels of efficient Class D amplification2000 Watts total power output2U rack heightExceptionally lightweightSwitch mode power supplyVariable speed cooling fan with front-to-back airflowGlobal mains operation, 115V to 230V auto-sensingComprehensive protection systemsSignal and clip limiter LEDs

The VIA2502 is an advanced 2-channel power amplifier which combines high power density with superb audio performance in a lightweight, cost-effective package. Delivering 2×1250 watts into 2 ohms, or 1×2500 watts into 4 ohms bridged, it is ideal for powering BlacklineQ, CDD and V.Series systems in small to medium-scale installations and portable sound applications.FeaturesTwo channels of efficient Class D amplification2500 Watts total power output2U rack heightExceptionally lightweightSwitch mode power supplyVariable speed cooling fan with front-to-back airflowGlobal mains operation, 115V to 230V auto-sensingComprehensive protection systemsSignal and clip limiter LEDs

The VIA5002 is an advanced 2-channel power amplifier which combines high power density with superb audio performance in a lightweight, cost-effective package. Delivering 2 x 2500 watts into 4 ohms or 2 x 1600 watts into 8 ohms, it ideal for powering subwoofers in installations and portable sound systems.The VIA5002 supports 70/100 V distributed line systems (2 x 2500 watts). It is the only VIA amplifier that provides this support.FeaturesTwo channels of efficient Class D amplification5000 Watts total power output2U rack heightExceptionally lightweightSwitch mode power supplyVariable speed cooling fan with front-to-back airflowGlobal mains operation, 100V to 240V auto-sensingComprehensive protection systemsSignal and clip limiter LEDs70/100 V distributed line support

Blackline Q8 is an ultra-compact, passive two-way loudspeaker featuring an 8” (200mm) LF driver with a 2” (50mm) voice coil and a 1” (25mm) exit HF compression driver with a 1” (25mm) dome. It has a Differential Dispersion horn for wider and more consistent coverage, which can be easily rotated for horizontal or vertical orientation depending on deployment needs. Despite its small size, Q8 delivers impressive performance, achieving a peak SPL of 121dB (127dB with crest factor 4).FeaturesUltra-Compact passive two-way systemSymmetrical multi-angle plywood enclosurePeak SPL of 121dB (127dB with crest factor 4)User-rotatable Differential Dispersion hornDispersion: 90°–110° horizontal × 50° verticalVertical and horizontal orientationScrew-tight, cloth-backed perforated steel grilleIntegrated ergonomic handle made from recycled ABSPole-mount cover maintains clean lines8Ω nominal impedanceTwo NL4 connectorsFlexible mounting options via M8 inserts

Blackline Q218 is a high-performance, dual-driver subwoofer designed to complement BlacklineQ Series full-range loudspeakers. It extends the system’s low-frequency response down to 38 Hz, delivering powerful bass performance with a Peak SPL of 142dB (148dB for crest factor 4) for exceptional low-end impact.FeaturesDual-driver, direct radiator subwoofer2 x 18” (460mm) drivers with 4” (102mm) voice coilsPeak SPL of 142dB (148dB for crest factor 4)Durable plywood enclosureSlot ports for reduced air noisePerforated steel grilleM20 / 1.4” (35mm) pole-mount socket4Ω nominal impedance Integral ergonomic handlesFeet for vertical or horizonal operationRebate recesses for stable horizontal stackingM10 flying insertsFittings for optional castorsThree NL4 connectors

Blackline Q118 is a compact, high-performance subwoofer designed for use with Blackline Q Series full-range loudspeakers. It extends the system’s low-frequency response down to 38Hz and delivers exceptional impact, with a Peak SPL of 136dB (142dB for crest factor 4).FeaturesCompact, direct-radiator subwoofer1 x 18” (460mm) driver with 4” (102mm) voice coilPeak SPL of 136dB (142dB for crest factor 4)Durable plywood enclosureSlot ports for reduced air noisePerforated steel grilleM20 / 1.4” (35mm) pole-mount socket8Ω nominal impedanceIntegral ergonomic handlesRebate recesses for stable vertical stackingM10 flying insertsFittings for optional castorsThree NL4 connectors

Blackline Q210 is a slimline, dual-driver subwoofer engineered for applications where a visually discreet solution is required. Designed to complement BlacklineQ Series full-range loudspeakers, it extends the system’s low-frequency response down to 49 Hz, delivering tight, punchy low frequency impact with a Peak SPL of 133dB (139dB for crest factor 4).FeaturesSlimline direct-radiator subwoofer2 x 10” (250mm) drivers with 2” (50mm) voice coilsPeak SPL of 133dB (139dB for crest factor 4)Durable plywood enclosureSlot ports for reduced air noisePerforated steel grilleM20 / 1.4” (35mm) pole-mount socket4Ω nominal impedanceIntegral ergonomic handlesFeet for vertical or horizonal operationRebate recesses for stable horizontal stackingM8 flying insertsThree NL4 connectors

Designed for venues where clarity and control are paramount, Blackline Q44 is a compact column loudspeaker that delivers a peak SPL of 119dB (125dB with crest factor 4) with precise coverage from a discreet footprint.It can operate as a stand-alone system or be supplemented by Blackline Q210 subwoofer, making it equally suited to performance venues, corporate events and worship spaces.FeaturesCompact passive two-way systemLightweight and portable with a discreet designPeak SPL of 119dB (125dB with crest factor 4)Differential Dispersion hornDispersion: 100°–120° horizontal × 40° verticalScrew-tight, cloth-backed perforated steel grillePole-mount cover maintains clean lines8Ω nominal impedanceOne NL4 connectorFlexible mounting options via M8 inserts

Designed for venues where clarity and control are paramount, Blackline Q26 is a compact column loudspeaker that delivers a peak SPL of 125dB (131dB with crest factor 4) with precise coverage from a discreet footprint.It can operate as a stand-alone system or be supplemented by Blackline Q210 subwoofer, making it equally suited to performance venues, corporate events and worship spaces.FeaturesCompact passive two-way systemLightweight, portable with a discreet designPeak SPL of 125dB (131dB with crest factor 4)Differential Dispersion hornDispersion: 100°–120° horizontal × 40° verticalScrew-tight, cloth-backed perforated steel grillePole-mount cover maintains clean lines8Ω nominal impedanceOne NL4 connectorFlexible mounting options via M8 inserts

Blackline Q15 is a significant upgrade over its predecessor, delivering enhanced performance and wider coverage, and features a die-cast aluminium chassis for improved thermal conductivity and more efficient motor cooling.A passive two-way system, Q15 is designed for professional portable applications and installations that demand the ultimate in sonic performance from a single enclosure.FeaturesPassive two-way systemSymmetrical multi-angle plywood enclosurePeak SPL of 133dB (139dB with crest factor 4)User-rotatable Differential Dispersion hornDispersion: 70°– 90° horizontal × 50° verticalVertical and horizontal orientationScrew-tight, cloth-backed perforated steel grilleIntegrated ergonomic handle made from recycled ABSPole-mount cover maintains clean lines8Ω nominal impedanceTwo NL4 connectorsFlexible mounting options via M8 inserts

With a peak SPL of 127dB (133dB with crest factor 4), Blackline Q12 meets the demand for a compact loudspeaker capable of delivering high sound levels — whether used as a stand-alone system or in combination with a BlacklineQ subwoofer. It features a 12” (300mm) LF driver with a 2.5” (63mm) voice coil and a 1” (25mm) exit HF compression driver with a 1.7” (43mm) dome. It has a Differential Dispersion horn for wider and more consistent coverage, which can be easily rotated for horizontal or vertical orientation, depending on deployment requirements.FeaturesCompact passive two-way systemSymmetrical multi-angle plywood enclosurePeak SPL of 127dB (133dB with crest factor 4)User-rotatable Differential Dispersion hornDispersion: 90°–110° horizontal × 50° verticalVertical and horizontal orientationScrew-tight, cloth-backed perforated steel grilleIntegrated ergonomic handle made from recycled ABSPole-mount cover maintains clean lines8Ω nominal impedanceTwo NL4 connectorsFlexible mounting options via M8 inserts

With a peak SPL of 125dB (131dB with crest factor 4), Blackline Q10 is a high-performance yet compact passive two-way loudspeaker system. It features a 10” (250mm) LF driver with a 2.5” (63mm) voice coil and a 1” (25mm) exit HF compression driver with a 1.4” (36mm) dome. The system incorporates a Differential Dispersion horn for wider and more consistent coverage, which can be easily rotated for horizontal or vertical orientation depending on deployment requirements.FeaturesCompact passive two-way systemSymmetrical multi-angle plywood enclosurePeak SPL of 125dB (131dB with crest factor 4)User-rotatable Differential Dispersion hornDispersion: 90°–110° horizontal × 50° verticalVertical and horizontal orientationScrew-tight, cloth-backed perforated steel grilleIntegrated ergonomic handle made from recycled ABSPole-mount cover maintains clean lines8Ω nominal impedanceTwo NL4 connectorsFlexible mounting options via M8 inserts

The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz.FeaturesFour input channels and eight output channels loudspeaker processor and matrixAnalogue, AES3 and Dante™ digital audio inputsHigh performance 96kHz DSPRemote control and monitoring over Ethernet via Martin Audio VU-NET softwareFIR optimisation for Martin Audio’s O-LineVX limiting allows a passive enclosure the same protection as a fully active unit.Comprehensive suite of EQ’s, delays and all pass filters.Global mains operation 100-240V, 50-60HzApplicationsLoudspeaker system digital controllerFront-of-house matrix to feed Dante digital audio to iKON amplifiers powering Martin Audio loudspeaker systemsUse with Martin Audio O-Line for FIR OptimisationUse with Martin Audio U-Hub to feed digital audio and network to an MLA Series array/subwoofer array via a single cable

The DX0.4 is the ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required, perhaps where there may be budget constraints.FeaturesProfessional 2-input, 4 output system processor for a wide range of system applications.Comprehensive, sophisticated processing options including EQ, gate, delay and limiting to optimise and protect a system.Fully assignable matrix routing of both inputs to any output with attenuation option on each routing node.Two balanced XLR inputs with up to 12dB of gain, polarity invert, 600ms of delay, 10 band parametric EQ with a choice of 14 filter types individually selectable for each band.Four balanced XLR outputs with 12dB of gain, polarity invert, 200ms delay, high and low pass filters with cut-off slopes from -6dB/oct to -48dB/oct using either Bessel, Butterworth or Linkwitz Riley filters. 8 band parametric EQ with up a choice of 14 filter types, Independent Program and Peak LimitersConvenient front panel controls and LCD display with an intuitive menu system for programming or modifying settings. One press mute buttons for all inputs and outputs.Front panel USB port for quick and easy PC connection.Networking option using either Ethernet or RS485 for larger systems.Output channel preset import function to quickly and easily compile a system to suit any application utilising a library of Martin Audio product channel presets.Six segment LED metering for input and output levels and limiter operation.32 User Presets to store system configurations.3-level customisable user modes with individual password protection.Universal switch mode mains PSU accepts 90 to 240V, 50/60Hz.Compact 1 rack unit design.Approximate shipping weight: 3.5kg

M10 EYE BOLT

M8 EYE BOLT

WALL BRACKET FOR BLACKLINE X15, FP15, CDD15, DDX15 AND CDD-LIVE 15

WALL BRACKET FOR BLACKLINE X10, X12 AND XP12, CDD10, CDD12 AND CDD-LIVE12

The DX0.6 is the ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required perhaps where there may be budget constraints.FeaturesProfessional 2-input, 6-output system processor for a wide range of system applications.Comprehensive, sophisticated processing options including EQ, gate, delay and limiting to optimise and protect a system.Fully assignable matrix routing of both inputs to any output with attenuation option on each routing node.Two balanced XLR inputs with up to 12dB of gain, polarity invert, 600ms of delay, 10 band parametric EQ with a choice of 14 filter types individually selectable for each band.Six balanced XLR outputs with 12dB of gain, polarity invert, 200ms delay, high and low pass filters with cut-off slopes from -6dB/oct to -48dB/oct using either Bessel, Butterworth or Linkwitz Riley filters. 8 band parametric EQ with up a choice of 14 filter types, Independent Program and Peak LimitersConvenient front panel controls and LCD display with an intuitive menu system for setting or modifying settings. One press mute buttons for all inputs and outputs.Front panel USB port for quick and easy PC connection.Networking option using either Ethernet or RS485 for larger systems.Output channel preset import function to quickly and easily compile a system to suit any application utilising a library of Martin Audio product channel presets.Six segment LED metering for input and output level and limiter operation.32 User Presets to store system configurations.3-level customisable user modes with individual password protection.Universal switch mode mains PSU accepts 90 to 240V, 50/60Hz.Compact 1 rack unit design.Approximate shipping weight: 3.5kg

The VIA5004 is an advanced 4-channel power amplifier which combines high power density with superb audio performance in a lightweight, cost-effective package. Delivering 4 x 1250 watts into 2 ohms, or 2 x 2500 watts into 4 ohms bridged, it is ideal for powering Blackline X, CDD and V.Series systems in small to medium-scale installations and portable sound applications. It can also be configured for 3-channel operation, for perfect compatibility with TH Series 3-way systems.FeaturesFour channels of efficient Class D amplification5000 Watts total power output2U rack heightExceptionally lightweightSwitch mode power supplyVariable speed cooling fan with front-to-back airflowGlobal mains operation, 115V to 230V auto-sensingComprehensive protection systemsSignal and clip limiter LEDsApplicationsSmall to medium-scale installationsPortable sound and stage monitoringHotels, restaurants and barsHouses of Worship and auditoriumsEducational facilitiesLive music and dance clubsMobile DJ’s

WB10/12 Wall bracket for BLACKLINE X8

DESCRIPTIONIdeal for medium-to-large rooms, the CDD15 is a very high-power, passive two-way system designed for installations that demand the ultimate in sonic performance from a single enclosure. It combines very high output capability with exceptional fidelity and coverage consistency. Its coaxial drive unit comprises a powerful 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.The Coaxial Differential Dispersion technology employed in the CDD15 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The CDD15 can be suspended by eyebolts or by means of an optional horizontal yoke.A full-range, passive two-way system, the CDD15 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES High-output, CDD™ passive two-way system Coaxial Differential Dispersion™ technology Elegant birch plywood enclosure User-rotatable coaxial drive unit Vertical and horizontal mounting options Screw-free perforated steel grille 8Ω nominal impedance Integral inserts for eyebolt suspension Black or white standard colour optionsAPPLICATIONS Live Music Clubs and Bars Nightclubs Bars and Restaurants Museums and AV Spaces Convention Centres Hotels Retail Outlets Leisure Centres Houses of Worship

DESCRIPTIONIdeal for medium-to-large rooms, the CDD15 is a very high-power, passive two-way system designed for installations that demand the ultimate in sonic performance from a single enclosure. It combines very high output capability with exceptional fidelity and coverage consistency. Its coaxial drive unit comprises a powerful 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.The Coaxial Differential Dispersion technology employed in the CDD15 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The CDD15 can be suspended by eyebolts or by means of an optional horizontal yoke.A full-range, passive two-way system, the CDD15 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES High-output, CDD™ passive two-way system Coaxial Differential Dispersion™ technology Elegant birch plywood enclosure User-rotatable coaxial drive unit Vertical and horizontal mounting options Screw-free perforated steel grille 8Ω nominal impedance Integral inserts for eyebolt suspension Black or white standard colour optionsAPPLICATIONS Live Music Clubs and Bars Nightclubs Bars and Restaurants Museums and AV Spaces Convention Centres Hotels Retail Outlets Leisure Centres Houses of Worship

DESCRIPTIONThe CDD12 is a compact, passive two-way system designed for installations that require high output levels. Its high-specification 12” (300mm) LF /1” exit HF Coaxial Differential Dispersion driver delivers perfect sound across the audience over medium-throw distances.The Coaxial Differential Dispersion technology employed in the CDD12 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The LF driver has a 2.5” (65mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.75” (44mm) polyimide diaphragm and features a low-compression phase-plug to reduce non-linearity.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD12 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD12 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant birch plywood enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD12 is a compact, passive two-way system designed for installations that require high output levels. Its high-specification 12” (300mm) LF /1” exit HF Coaxial Differential Dispersion driver delivers perfect sound across the audience over medium-throw distances.The Coaxial Differential Dispersion technology employed in the CDD12 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The LF driver has a 2.5” (65mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.75” (44mm) polyimide diaphragm and features a low-compression phase-plug to reduce non-linearity.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD12 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD12 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant birch plywood enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD10 is a very compact two-way passive loudspeaker system which utilises a 10” (250mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver. It is uniquely placed to meet the foreground requirements of music bars and clubs, as well as the varied architectural applications that require upfront sound levels from a very compact enclosure. Use with a SX118 or CX218 subwoofer will enable the CDD10 to operate as small dancefloor system that is remarkably powerful for its size.The Coaxial Differential Dispersion technology employed in the CDD10 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive composite enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD10 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD10 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessories Integral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONS Live Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD10 is a very compact two-way passive loudspeaker system which utilises a 10” (250mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver. It is uniquely placed to meet the foreground requirements of music bars and clubs, as well as the varied architectural applications that require upfront sound levels from a very compact enclosure. Use with a SX118 or CX218 subwoofer will enable the CDD10 to operate as small dancefloor system that is remarkably powerful for its size.The Coaxial Differential Dispersion technology employed in the CDD10 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive composite enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD10 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD10 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessories Integral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONS Live Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESUltra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONSBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESUltra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONSBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD5 is a two-way passive micro speaker designed for discreet positioning in architectural installations — including bars, museums, foyers, concourses, exhibition centres and HoW. It features a unique, patent protected 5” (125mm) LF/0.7” (19mm) HF Coaxial Differential Dispersion driver in a rigid ABS moulded enclosure and is supplied with a dedicated omni-directional mounting bracket.The Coaxial Differential Dispersion technology employed in the CDD5 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience to distribute sound evenly front-to-back, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response in the crossover region associated with non-coaxial designs.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of the supplied omni-directional bracket or an optional close-mount ceiling bracket.The CDD5TX-WR option incorporates a 70V/100V line transformer.A full-range, passive two-way system, the CDD5 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES: Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant ABS moulded enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour options70V/100V line transformer optionAPPLICATIONS:Bars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD5 is a two-way passive micro speaker designed for discreet positioning in architectural installations — including bars, museums, foyers, concourses, exhibition centres and HoW. It features a unique, patent protected 5” (125mm) LF/0.7” (19mm) HF Coaxial Differential Dispersion driver in a rigid ABS moulded enclosure and is supplied with a dedicated omni-directional mounting bracket.The Coaxial Differential Dispersion technology employed in the CDD5 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience to distribute sound evenly front-to-back, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response in the crossover region associated with non-coaxial designs.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of the supplied omni-directional bracket or an optional close-mount ceiling bracket.The CDD5TX-WR option incorporates a 70V/100V line transformer.A full-range, passive two-way system, the CDD5 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES: Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant ABS moulded enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour options70V/100V line transformer optionAPPLICATIONS:Bars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12 and CDD15.The Coaxial Differential Dispersion technology employed in the CDD8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD8 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES:Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONS: Live Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

Blackline Q8 is an ultra-compact, passive two-way loudspeaker featuring an 8” (200mm) LF driver with a 2” (50mm) voice coil and a 1” (25mm) exit HF compression driver with a 1” (25mm) dome. It has a Differential Dispersion horn for wider and more consistent coverage, which can be easily rotated for horizontal or vertical orientation depending on deployment needs. Despite its small size, Q8 delivers impressive performance, achieving a peak SPL of 121dB (127dB with crest factor 4).FeaturesUltra-Compact passive two-way systemSymmetrical multi-angle plywood enclosurePeak SPL of 121dB (127dB with crest factor 4)User-rotatable Differential Dispersion hornDispersion: 90°–110° horizontal × 50° verticalVertical and horizontal orientationScrew-tight, cloth-backed perforated steel grilleIntegrated ergonomic handle made from recycled ABSPole-mount cover maintains clean lines8Ω nominal impedanceTwo NL4 connectorsFlexible mounting options via M8 inserts

The SX112 is an ultra-compact direct radiating sub-bass system designed to extend the bandwidth and increase the headroom of full-range loudspeaker models. It features a very efficient 12" (300mm) long-throw bass driver with a high power 3" (75mm) voice coil and generously-sized reflex ports for low noise, high power operation.FeaturesUltra-Compact, single driver, direct radiating subwoofer12” (300mm) driver with 3” (75mm) voice coilWater resistant coneLarge ports for reduced air noisePerforated steel grilleBlack or white standard colour optionsIntegrated flying points