Audio Technica AT-VMN95SH

AudioTechnica AT-VMN95ML

AT-VMN95ML, VM95 series Microlinear replacement stylusAluminium CantileverMicrolinear StylusNude Square ShankEvery cartridge diamond stylus becomes worn after a period of play.Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

165 €

Audio Technica AT-VMN95EN

VM95 series Elliptical Nude replacement stylus Aluminium cantilever Elliptical Nude Stylus Nude Round Shank VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C,AT-VMN95E,AT-VMN95EN,AT-VMN95ML,AT-VMN95SH,AT-VMN95SP Elliptical Nude Stylus Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

119 €

Audio Technica AT-VMN95E

The Audio-Technica AT-VMN95E is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95E cartridge and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

42 ,5 €

Audio Technica AT-VMN95C

The Audio-Technica AT-VMN95C is a genuine VM95 Series replacement stylus with a conical tip (0.6 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95C cartridge and fits every VM95 cartridge, as well as the AT-LP70XBT and AT-LP70X turntables fitted with the AT-VM95C.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA conical stylus lasts approximately 500 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

24 €

Audio Technica AT-VMN95SP

VM95 series 78rpm SP replacement stylus Aluminium cantilever SP 3mil Conical Stylus Bonded Round Shank VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C,AT-VMN95E,AT-VMN95EN,AT-VMN95ML,AT-VMN95SH,AT-VMN95SP Conical Bonded (3mil) Stylus A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

78 ,5 €

Audio Technica AT-VMN95EBK

The Audio-Technica AT-VMN95EBK is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil) and an aluminium cantilever. It is the black-housing version of the AT-VMN95E, for the AT-VM95E cartridge, and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

39 €

Audio Technica AT-VM95SH

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz. Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 25,000Hz frequency response VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C, AT-VMN95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH, AT-VMN95SP AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers. VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers. Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli. The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing. The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction. ATN-XP7, ATN-XP5, ATN-XP3 Shibata Stylus Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume. No use of nuts VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

219 €

Ortofon Stylus 2M Blue

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

169 €