Musical Fidelity M6s PRX

Musical Fidelity M8s-500S Black

Ο M8s-500s είναι στερεοφωνικός τελικός ενισχυτής που οδηγεί σχεδόν κάθε ηχείο και αποτελεί τον ιδανικό, οπτικά και ηχητικά, συνεργάτη του προενισχυτή M8.Δεν έχουν όλοι χώρο για δύο μεγάλους μονοφωνικούς τελικούς, ούτε χρειάζονται απαραίτητα τόση ισχύ. Για αυτούς σχεδιάστηκε ο M8s-500s, που μαζί με τον M8 Pre δημιουργεί ένα σύστημα ενίσχυσης κορυφαίου επιπέδου.Διαθέτει δύο γεφυρωμένους μονοφωνικούς ενισχυτές υψηλού ρεύματος, με γενναιόδωρες τροφοδοσίες για κορυφαία transients και δυναμική. Χάρη στο υψηλό ρεύμα εξόδου, οδηγεί άνετα και τα πιο απαιτητικά ηχεία.Με χαμηλή παραμόρφωση και ελάχιστο θόρυβο, αποδίδει κάθε είδος μουσικής ακριβώς όπως το ήθελε ο καλλιτέχνης. Εξαιρετικός λόγος σήματος προς θόρυβο, μεγάλο εύρος ζώνης και δυναμική περιοχή, με εντυπωσιακή ανάλυση και λεπτομέρεια.ΠροδιαγραφέςΙσχύς: 500 W ανά κανάλι στα 8 Ohm (27 dBW)THD+N: 120 dB (A-weighted)Απόκριση συχνοτήτων: +0, –1 dB, 10 Hz – 80 kHzΕίσοδοι: 1x RCA line, 1x XLR balanced, 1x trigger 3,5 mm (±4,5 έως ±15 V DC)Έξοδοι loop: 1x RCA, 1x XLR balanced, 1x trigger 3,5 mm 12 V DCΔιαστάσεις (Π x Υ x Β): 440 x 160 x 460 mmΒάρος (χωρίς/με συσκευασία): 29 kg / 34,5 kg

4.650 €

Rotel RMB-1504 Black

Ο τελικός ενισχυτής 4 καναλιών Class AB RMB-1504 συνεχίζει τη διαχρονική δέσμευση της Rotel για απόδοση χωρίς συμβιβασμούς, βασιζόμενος σε περισσότερα από 60 χρόνια σχεδιασμού ενισχυτών και εσωτερικής κατασκευής ηλεκτρονικών Hi-Fi. Ο ενισχυτής αυτός παρέχει την ισχύ και την εκλέπτυνση που απαιτούνται τόσο για εγκαταστάσεις Home Theater όσο και για λύσεις multi-room ήχου μέσω custom εγκατάστασης.

1.449 €

Eversolo AMP-F10

Ο Eversolo AMP-F10 είναι τελικός ενισχυτής Class AB με αρχιτεκτονική dual mono, που δίνει 2 × 200 W σε 8 Ω και φτάνει τα 950 W σε 4 Ω όταν γεφυρωθεί σε mono. Είναι κατάλληλος για hi-fi και για home cinema.Ταιριάζει ιδανικά με τον Eversolo DMP-A10, που τον οδηγεί απευθείας με τον προενισχυτή R2R του, και με ηχεία βάσης ή δαπέδου, ακόμη και χαμηλής ευαισθησίας ή με μεγάλα woofer.

2.580 €

Tsakiridis Devices Achilles Ultra

Achilles UltraClass A 2x8WAchilles Ultra is a power amplifier in monoblock configuration.It’s design is a class A 300B triode amplifier with mu-stage driving circuit.All electronic components are through hole type soldered by hand.Achilles Ultra utilizes our 8 layer handmade output transformers for superb sound quality.The 8W of power per channel of Achilles requires high sensitivity loudspeakers to enjoy your music. The triode class A configuration of the 300B with the high linearity of the preamplification stage offer an unsurpassed audio experience to every audiophile.Gold plated RCA connectors are implemented for the signal input and WBT-0703 Next Gen binding posts for the loudspeakers.Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. Mundorf Evo signal capacitors are used in Achilles Ultra.The meticulous PCB design ensures excellent behavior in SNR and distortion.Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.The handmade multilayer output transformers allow the amplifier to reveal the sound stage and all the music details through the entire audio spectrum.Made by us and tested thoroughly for quality and reliability.The same applies to the power transformer. The positioning of the transformers is such that minimizes the magnetic coupling between power and output transformers.FeaturesInputs: 1 line inputInput connectors: RCA gold platedSpeaker connectors: WBT-0703 Next GenPower supply capacitors: High quality Long life CapacitorsSignal capacitors: Jantzen Audio Superior-Z capacitorsPower resistors: Carbon film 5% tolerancePower transformer: Handmade 250W each unitOutput transformer: Handmade 8 layer windings high quality coreDriving stage tubes: 1x6SL7, 1x EL34 each unitPower tubes: 1x300B each unit

2.576 €

Tsakiridis Devices Artemis Ultra

Artemis UltraClass AB1 2x70WArtemis Ultra is a power amplifier in dual-mono configuration.It’s design is a push-pull configuration implementing 2 power tubes per channel in class AB1 operation.All electronic components are through hole type soldered by hand.Artemis Ultra utilizes our 8 layer handmade output transformers with high quality core for superb sound quality.The push – pull configuration of Artemis Ultra draws enough power from the output tubes to drive a wide range of loudspeakers. Gold plated RCA connectors are implemented for the signal input and WBT-703 Next Gen binding posts for the loudspeakers.Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. Metal film power resistors and Jantzen superior-Z signal capacitors are used in Artemis Ultra. The meticulous PCB design ensures excellent behavior in SNR, distortion and channel separation.Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.The handmade multilayer output transformers allow the amplifier to reveal the sound stage and all the music details through the entire audio spectrum.Made by us and tested thoroughly for quality and reliability.The same applies to the power transformer. The positioning of the transformers is such that minimizes the magnetic coupling between power and output transformers.FeaturesInputs: 1 line inputInput connectors: RCA gold platedSpeaker connectors: WBT-0703 Next GenPower supply capacitors: High quality Long life CapacitorsSignal capacitors: Jantzen Audio Superior-Z capacitorsPower resistors: Metal film 5% toleranceLow power resistors: Metal film 1% tolerancePower transformer: Handmade 400WOutput transformer: Handmade 8 layer high quality coreDriving stage tubes: 4x12AT7Power tubes: 4xKT150

2.820 €

Quad 303

Iconic British Engineering The QUAD 303 is a legendary Class AB power amplifier that has stood the test of time, renowned for its transparent, musical sound and robust build quality. Originally introduced in the 1960s, it has been meticulously re-engineered to meet modern audiophile standards while preserving its classic charm.Advanced Output Stage Featuring QUAD’s signature "Triples" output stage, the 303 employs a fully complementary design that ensures low distortion and high linearity. This innovative approach delivers a clean, precise, and musically warm reproduction, impressing at both low and high volumes.Flexible Power Options The amplifier offers versatile power configurations: 50W per channel into 8Ω, 70W per channel into 4Ω, and 140W in bridged mode into 8Ω. This flexibility allows it to drive a wide range of loudspeakers with ease, including QUAD’s electrostatic designs.Modern Enhancements The reissued QUAD 303 incorporates a custom 200VA toroidal transformer, upgraded circuitry, and improved thermal management. These enhancements ensure greater reliability, reduced heat generation, and compatibility with contemporary audio systems.Classic Aesthetic Retaining its iconic anodized chassis and CNC-routed heat sinks, the QUAD 303 exudes a timeless design that remains relevant in today's hi-fi landscape. Its understated elegance complements any audio setup, from vintage to modern.Key FeaturesPower Output: 50W per channel (8Ω), 70W per channel (4Ω), 140W bridged (8Ω)Output Stage: Fully complementary "Triples" design for low distortion and high linearityTransformer: Custom 200VA toroidal transformer for improved performanceInputs: 1 x Line, 1 x XLR for versatile connectivityOutputs: 1 x Stereo Speaker, 1 x 12V Trigger, 1 x 12V Trigger (Link)Frequency Response: 20Hz – 20kHz (+/-0.3dB)Total Harmonic Distortion (THD): 108dB (A-weighted)Maximum Output Current: 10A for driving demanding loadsDesign: Anodized chassis with CNC-routed heat sinks for durability and aesthetics

1.499 €

Eversolo AMP-F8

Ο Eversolo AMP-F8 είναι στερεοφωνικός τελικός ενισχυτής Class AB που δίνει 2 × 180 W σε 8 Ω και 2 × 280 W σε 4 Ω, ενώ γεφυρωμένος σε mono φτάνει τα 500 W σε 8 Ω. Στις χαμηλές στάθμες ακρόασης το στάδιο εξόδου δουλεύει σε Class A.Σχεδιάστηκε ως το ιδανικό ταίρι για τους Eversolo DMP-A8 Gen 2 και DMP-A8 Master Gen 2, που οδηγούν τον ενισχυτή απευθείας με τον προενισχυτή R2R τους, αλλά δουλεύει με κάθε προενισχυτή ή streamer με μεταβλητή έξοδο.

1.800 €