. go to top icon

Κεφαλές Πικάπ

Φίλτρα
126  Προϊόντα
Σελ
από 3

The PrinceThe younger sibling to the Epoch3, the Aeon3 unites new shielding techniques with sapphire, diamond, and wood in a major step forward for phono cartridge design.Worthy SoundThe Lineage Series brings a higher level of listening to your vinyl, and the Aeon3 sole purpose is just that. Inspired by the Grado Epoch3, the Aeon3 brings to life an exceptional reproduction of vocals and instruments, with superlative tonal balance, dynamics, imaging, and realism. The Aeon3 marries color-correct harmonics with extremely detailed low frequency pitch information. Our patented Flux-Bridger generator design creates a superior balance throughout the full frequency spectrum with superb resolution and clarity, which produces an overall truer picture of the music.The MaterialsA major step forward in phono cartridge design, the sapphire, diamond, and cocobolo work in harmony to bring this cartridge to life. The specially designed diamond stylus, for the first time in a Grado, is mounted on a sapphire cantilever that connects to the stylus generating system. The Aeon3 features a unique system that has the lowest effective moving mass of any cartridge, providing wonderful tracking on your turntable.Extreme PrecisionAll of the internal magnetic circuit parts are Swiss screw machined or moldedmetal, which have tolerances on the order of the best Swiss-made watches. Combining newly developed coil winding techniques with decades-old disciplines bring exact unison between the four coils in each phono cartridge.This creates precise balance between channels and accurate stereo imaging.A new four-step shielding process allows the isolation of the wire turns in the coils, and creates an unrivaled clear path for the signal to travel.House of CocoboloThe Aeon3 is nestled inside a cocobolo housing, adding solid mass and a boldyet revealing signature sound. Cocobolo, known for fine instruments and those chess sets that look too nice to touch, is some of the most beautiful and tonally pleasing woods we have ever used. This specially selected species ofcocobolo goes through a variation of thermal aging processes and enhances its ability to better dampen and control the resonant frequencies throughout the cartridge. Its denseness and grain is a primary reason why it produces such a unique sound.Hand Assembled in BrooklynEach Aeon3 sees final assembly by John Grado himself on his workbench. Every experience in our history has led to the creation of the Lineage Series. The Aeon3 represents the craftsmanship and unwavering dedication to sound that has been Grado’s main focus since 1953.

7.800 €
36 Δόσεις 269,28€ / μήνα
Κατόπιν Παραγγελίας

Cured Jarrah For The CureNearing the top of the Timbre Series, the Master3 achieves optimal sonic quality due to an intricate curing process and specialized materials reserved for our best cartridges.On Reserve.Some practices we reserve for cartridges near the top of the line, and it starts here. To achieve our desired sound, we experimented with multiple longer curing processes that differ from the Opus3, Platinum3, and Sonata3 while using more modified materials. Each Master3 is individually calibrated after being assembled.The MaterialsTo make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge™. Unlike the cartridges before it, we modified our five piece OTL cantilever technology to achieve a 5% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Master3 uses a specially Grado designed nude elliptical diamond.Extreme PrecisionGrado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we assemble.House of JarrahAfter the Platinum3 cartridge is crafted, it is then placed inside a Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies. Hand Assembled in BrooklynEach Master3 is hand assembled by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Master3 steady and producing the Grado signature sound. We started with cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Master3.

1.300 €
36 Δόσεις 44,88€ / μήνα
Κατόπιν Παραγγελίας

Into the Woods‬Achieving fantastic accuracy and control, the Reference3 does everything the Master3 can do - but does it better thanks to specialized intricate processes while being crafted.Top of the TimbreWhile similar to its younger sibling in a few aspects, the Reference3 has a much longer build time since it undergoes extremely unique processes only a few of our cartridges go through. This longer, more intricate practice produces a more colorful and deeper sound. When working in tandem with the special curing process and individual calibrations, we have the best cartridge in the Timbre Series.The MaterialsTo make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge™. We modified our four piece OTL cantilever technology to achieve a 5% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Reference3 uses a specially Grado designed true ellipsoid diamond.Extreme PrecisionGrado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.Built from JarrahAfter the Reference3 cartridge is crafted, it is then placed inside a Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies. Hand-Built in BrooklynEach Reference3 is hand-built by our team in Brooklyn, as it has been for decades. After a specialized process that brings it to life, they are fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Sonata3 steady and producing the Grado signature sound. We started building cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Reference3.

1.950 €
36 Δόσεις 67,32€ / μήνα
Κατόπιν Παραγγελίας

Platinum BlondeThe first step-up from the Opus3, the Platinum3 puts Jarrah wood and a twin magnet system to work for your favorite music.Hear MoreThe Platinum3 is a great example of what the Timbre Series is made for: to start listening to your music with more clarity and depth than you’ve heard before. The MaterialsTo make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge™. We modified our four piece OTL cantilever technology to achieve a 10% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum3 uses a specially Grado designed elliptical diamond.Extreme PrecisionGrado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we assemble.House of JarrahAfter the Platinum3 cartridge is crafted, it is then placed inside an Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.Hand Assembled in BrooklynEach Platinum3 is hand assembled by our team in Brooklyn, as it has been for decades. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Platinum3 steady and producing the Grado signature sound.

520 €
36 Δόσεις 17,95€ / μήνα
Κατόπιν Παραγγελίας

Into the WoodsThe Sonata3 does everything the Platinum3 can do - but does it better thanks to an intricate processes while being crafted.A Step UpWhile similar to its younger sibling in a few aspects, the Sonata3 has a much longer build time since it undergoes extremely unique processes only a few of our cartridges go through. This longer, more intricate practice produces a more colorful and deeper sound. The MaterialsTo make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge™. We modified our four piece OTL cantilever technology to achieve a 10% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Sonata3 uses a specially Grado designed nude elliptical diamond.Extreme PrecisionGrado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.Built from JarrahAfter the Sonata3 cartridge is crafted, it is then placed inside a Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies. Hand-Built in BrooklynEach Sonata3 is hand-built by our team in Brooklyn, as it has been for decades. After a specialized process that brings it to life, they are fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Sonata3 steady and producing the Grado signature sound. We started building cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Sonata3.

780 €
36 Δόσεις 26,93€ / μήνα
Κατόπιν Παραγγελίας

A Grand EntranceBringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges.Bridging the GapThe Opus3 exists specifically to bring the entry-level and the mid-range phono cartridges closer together, creating an even tighter ecosystem of cartridges. We worked on the Opus3 knowing we wanted to have a cost-effective wooden cartridge while at the same time taking advantage of the techniques and processes used in the higher-end models. If taking a step up in your turntable setup is on your to-do list, start here.First of its KindWhen it comes to the Opus3, there are a few “firsts”. This is the first cartridge with a maple wood housing, as well as the first to use what we learned with our high-end cartridges at such an entry-level price. The housing is a new shape but still keeps the wood working in tandem with the cartridge inside. This is also the first cartridge assembled specifically with the Timbre Series in mind.Extreme PrecisionGado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we assemble.House of MapleThe Opus3 is nestled inside a maple housing, something a cartridge has never done before. After years of working with maple from our Heritage and Statement Series headphones, we knew it was time to bring it to a turntable. Maple produces a vibrant and luscious sound, while staying consistent and clear. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.Hand Assembled in BrooklynEach Opus3 is hand assembled by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Opus3 steady and producing the Grado signature sound. We started with cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Opus3.

358 €
36 Δόσεις 12,36€ / μήνα
Κατόπιν Παραγγελίας

Make a Fast FriendThe Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

241 €
36 Δόσεις 8,32€ / μήνα
Κατόπιν Παραγγελίας

Monolithic MonophonicThere are many analog lovers with record collections that include mono albums. At Grado we strive to have products that will fit all the needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings.

241 €
36 Δόσεις 8,32€ / μήνα
Κατόπιν Παραγγελίας

Disc Jockey Two HundredThe Prestige model DJ200 uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing.

242 €
36 Δόσεις 8,35€ / μήνα
Κατόπιν Παραγγελίας

Mellow YellowBoth the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Silver3 & Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver3 & Gold3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Silver3 & Gold3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver3 & Gold3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

312 €
36 Δόσεις 10,77€ / μήνα
Κατόπιν Παραγγελίας

Mellow YellowBoth the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Silver3 & Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver3 & Gold3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Silver3 & Gold3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver3 & Gold3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

338 €
36 Δόσεις 11,67€ / μήνα
Κατόπιν Παραγγελίας

Color me awesomeBoth the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

163 €
36 Δόσεις 5,63€ / μήνα
Κατόπιν Παραγγελίας

Color me awesomeBoth the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

129 €
36 Δόσεις 4,45€ / μήνα
Κατόπιν Παραγγελίας

Awesome sound in red states and blue statesBoth the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Red3 & Blue3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Red3 & Blue3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Red3 & Blue3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red3 & Blue3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

208 €
36 Δόσεις 7,18€ / μήνα
Κατόπιν Παραγγελίας

DescriptionHigh-Output Moving Coil – For outstanding musical detailExposed Cantilever Design – Reduces unwanted resonance and vibration.Elliptical Stylus – Improved frequency response and lower distortion.Designed and Engineered in the UK – Bespoke Cambridge Audio design.Alva MC High-Output Moving Coil CartridgeWith its exposed cantilever design and elliptical stylus, our engineers custom-designed Alva MC, a high-output Moving Coil cartridge for Alva TT to deliver stunning levels of musical detail. The 68° angled cantilever is a call-back to our founding year of 1968 and a celebration of over 50 years of innovation.High-Output Moving CoilMoving Coil cartridges are known for high-precision and detailed music reproduction during playback.Exposed Cantilever DesignAlva MC utilises an exposed cantilever design. This cuts down on unwanted resonance and vibration that can be a downside of conventional enclosed designs.Elliptical StylusWe chose an elliptical stylus for Alva MC, to give a large contact area within the groove of your records. This offers outstanding frequency response and low distortion figures. Lightweight and FastCompared to many of its Moving Magnet (MM) counterparts, Alva MC is lighter and faster to respond to the record’s grooves, therefore able to unlock more of the musical detail contained within. Designed and Engineered in LondonFinished in our custom lunar-grey to compliment Alva TT V2, the bespoke Cambridge Audio design adopts the patterned knurling found on our premium Edge hi-fi. The 68° angle seen running top to bottom is a call-back to our founding year of 1968. A playful touch that reminds us of our roots. 

499 €
36 Δόσεις 17,23€ / μήνα
Κατόπιν Παραγγελίας

For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridges. Notably high output models that are designed to work with MM inputs negating the necessity for equipment change or the use of setup devices required for low output cartridges. The outstanding performance of the Dynavector high output moving coil cartridges can be attributed to the exclusively Dynavector designed coil winding machine capable of utilizing extremely fine coil wire providing a high output to mass ratio.Features and ImprovementsDV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets. The 20 X2L has an output of 0.3 mV ideal for most MC phono stages. The low output version offers superb performance when combined with dedicated moving coil inputs.

1.150 €
12 Άτοκες Δόσεις 95,83€ / μήνα
Κατόπιν Παραγγελίας

For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridges. Notably high output models that are designed to work with MM inputs negating the necessity for equipment change or the use of setup devices required for low output cartridges. The outstanding performance of the Dynavector high output moving coil cartridges can be attributed to the exclusively Dynavector designed coil winding machine capable of utilizing extremely fine coil wire providing a high output to mass ratio.Features and ImprovementsDV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20X2H a healthy 2.8 mV output - suitable for most MM inputs. The high output model is well suited to valve preamplifiers or electronics that only offer MM inputs.

1.150 €
12 Άτοκες Δόσεις 95,83€ / μήνα
Κατόπιν Παραγγελίας

The original Te Kaitora cartridge was the result of collaboration between Dynavector Japan and Dynavector New Zealand. The Te Kaitora allowed analogue enthusiasts to embark on a voyage of discovery to the outer limits of vinyl reproduction. The improved Te Kaitora Rua continues the journey by incorporating many of the newest features of its Dynavector stable-mates, the XV-1s and XX-2. The Te Kaitora Rua has even managed to improve on the original's silk-like treble and openness. Note: Te Kaitora means "The Discoverer" in the language of the NZ Maori people, Rua, is "the second version".ImprovementsThe wire for the coil has been changed to the PCOCC copper wire from the silver wire. It sounds a much smoother and has a much better musical performance.A titanium headpiece for maximum ridgity along with a miniature stainless steel bolt coupling the front and rear yokes to the magnetic circuit assembly.A 6mm long boron cantilever with the Pathfinder (PF) line contact stylus as used with both Dynavector XV-1s and XX-2.The ingenious square shaped armature and matching square shaped aperture in the front yoke providing much improved linearity in the magnetic flux distribution.Alnico magnets are used for high magnetic flux density.

3.452 ,85 €
12 Άτοκες Δόσεις 287,74€ / μήνα
Κατόπιν Παραγγελίας

The DV XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.

1.995 €
12 Άτοκες Δόσεις 166,25€ / μήνα
Κατόπιν Παραγγελίας

The HANA-Umami WayThe HANA-Umami Red high-end moving coil cartridge combines brilliant materials and classic Japanese techniques with modern audio engineering. Ebony wood, rare-earth magnets, precision-cut diamond, high-purity copper wires, Urushi lacquering, and CNC machined Duralumin synergize under the vision of Hana designer Okada-san.The synergistic relationship in MC generators between magnet, armature, and coil windings is a critical aspect of outstanding cartridge design; and like a signature dish at a Michelin 3-star restaurant, every element and detail working in concert results in a memorable and emotional experience.All the major parts in a HANA-Umami Red are manufactured in house by Excel Sound with its rich history spanning over 50 years. Excel’s highly trained craftsmen skillfully hand assemble the HANA-Umami Red ensuring an intensely musical experience furthering the HANA “Brilliant and Gorgeous” sound quality.Umami Sound - Wonderful Taste in Music

3.752 ,85 €
12 Άτοκες Δόσεις 312,74€ / μήνα
Κατόπιν Παραγγελίας

One of the world’s best High Output Moving Coil cartridges, the MH combines the technological advances of the Hana M Series with the optimal interface for moving magnet phono stages.M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution. Delrin© cartridge body – Advanced Materials The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low level information and enhance dynamic range. Cryogenic Processing - Unique Technical Treatment Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality. Brass Cap with Threaded fittings - Superior Mechanical Interface The Delrin© cartridge body features an integral machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables. Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.

1.200 €
12 Άτοκες Δόσεις 100,00€ / μήνα
Κατόπιν Παραγγελίας

Building upon the foundation of the critically acclaimed HANA sound, the ML aspires toward affordable perfection and represent the further evolution of the “Brilliant and Gorgeous” quality that has earned HANA its worldwide reputation. M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution. High Purity copper wire – Higher Specification Part Very high-purity copper wire is used for winding the ML coil with a new low impedance generator for optimized performance with a broader range of phono preamps Delrin© cartridge body – Advanced Materials The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low level information and enhance dynamic range. Cryogenic Processing - Unique Technical Treatment Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality. Brass Cap with Threaded fittings - Superior Mechanical Interface The Delrin© cartridge body features an integral machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables. Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.

1.200 €
12 Άτοκες Δόσεις 100,00€ / μήνα
Κατόπιν Παραγγελίας
Deal

H Hana SH είναι η έκδοση Hi-Output της κεφαλή Hana SL που έχει τις περισσότερες κριτικές και βραβεία μέχρι σήμερα. Διακρίνεται για το μαύρο σώμα του και την ακίδα Shibata. Η Hana SL διαθέτει μεγαλύτερη ακρίβεια σε ισορροπία καναλιών, μεγαλύτερο διαχωρισμό καναλιών και βελτιωμένη επέκταση υψηλών συχνοτήτων.“A first-class MC cartridge” – STEREO (Germany)  “Remarkably smooth frequency response…terrific value for the money.” – HiFi World (UK) “In the same class as a cartridge costing 10x the price.” – TNT Audio (France) Stereophile Recommended Component USA The Absolute Sound USA Golden Ear Award 2017Rocky Mountain International HiFi Press Award winner  2018 and 2019

740 €
36 Δόσεις 25,55€ / μήνα
Κατόπιν Παραγγελίας

H Hana EL παρέχει μουσική απόδοση υψηλών προδιαγραφών από μια κεφαλή κινούμενου πηνίου σε εξαιρετικά ελκυστική τιμή. Χειροποίητη στην Ιαπωνία, η EL χρησιμοποιεί μαγνήτες ALNICO και προσφέρει στον ακροατή ηχητική ποιότητα που συναντάς σε πολύ ακριβότερες κεφαλές moving coil.

480 €
36 Δόσεις 16,57€ / μήνα
Κατόπιν Παραγγελίας

H Hana EL παρέχει μουσική απόδοση υψηλών προδιαγραφών από μια κεφαλή κινούμενου πηνίου χαμηλής εξόδου σε εξαιρετικά ελκυστική τιμή. Χειροποίητη στην Ιαπωνία, η EL χρησιμοποιεί μαγνήτες ALNICO και προσφέρει στον ακροατή ηχητική ποιότητα που συναντάς σε πολύ ακριβότερες κεφαλές moving coil.

482 ,85 €
36 Δόσεις 16,67€ / μήνα
Κατόπιν Παραγγελίας

Το πιο πρόσφατο μέλος της σειράς κεφαλών Rega MC, η Ania Pro χρησιμοποιεί την προηγμένη ακίδα γυμνού διαμαντιού προφίλ Vital. Αυτό το προφίλ έχει σχεδιαστεί για να εξάγει όσο το δυνατόν περισσότερες λεπτομέρειες από την επιφάνεια του βινυλίου. Η Ania Pro προσφέρει σφιχτά μπάσα, ζεστή μεσαία περιοχή και ακριβείς υψηλές συχνότητες για να προσφέρει μια καλά ισορροπημένη και λεπτομερή απόδοση.Ακούστε σαν επαγγελματίαςΧρησιμοποιώντας το μοναδικό μας χειροποίητο πηνίο μικροτύλιξης που βρίσκεται και στην υπόλοιπη σειρά MC, η Ania Pro στεγάζεται σε ένα μοναδικό εξαιρετικά άκαμπτο σώμα, εξασφαλίζοντας ακριβή κατασκευή και τη μέθοδο στερέωσης τριών σημείων της Rega που προσφέρει βέλτιστη σύνδεση με το κέλυφος κεφαλής.

1.149 €
36 Δόσεις 39,67€ / μήνα
Κατόπιν Παραγγελίας

Η σειρά Goldring E Series χρησιμοποιεί διπλούς μαγνήτες χαμηλής μάζας (Magnetic Duplex) οι οποίοι επιδρούν σε ένα πηνίο που είναι τοποθετημένο κατά 45 μοίρες και αυξάνουν τον διαχωρισμό των καναλιών. Μαγνητική τεχνολογία Duplex ™ Όλες οι κεφαλές της σειράς διαθέτουν μαγνητική τεχνολογία Duplex ™ - μια γεννήτρια διπλού μαγνήτη, η οποία ανιχνεύει με μεγαλύτερη ακρίβεια την αυλάκωση εγγραφής, παρέχοντας καλύτερο στερεοφωνικό διαχωρισμό και ένα πιο συναρπαστικό και μουσικό στάδιο ήχου. Εξειδικευμένη ρύθμιση Οι κεφαλές της σειράς E έχουν σχεδιαστεί έτσι ώστε να επιτρέπουν μικρές ρυθμίσεις κατά την εγκατάσταση χρησιμοποιώντας μια ειδική βίδα ρύθμισης. Αυτό σημαίνει ότι η κεφαλή μπορεί να εγκατασταθεί με ασφάλεια ακομα και σε ένα τυπικό πικάπ επειδή έχει προκαθοριστεί η γωνία που κάνει η βελόνα με την επιφάνεια εγγραφής. Το αποτέλεσμα είναι μια βελτιστοποιημένη ισορροπία καναλιών με την απαιτούμενη ρύθμιση οριζόντιας παρακολούθησης. Αυτό εξασφαλίζει συνεπή και ήσυχη απόδοση για τη διάρκεια Το μοντέλο E3 με την εκλεπτυσμένη σούπερ ελλειπτική γραφίδα της βελόνας του είναι μια αξιόλογη αναβάθμιση για όσους επιθυμούν να "πάρουν" ακόμα περισσότερες πληροφορίες και λεπτομέρειες από το αυλάκι του δίσκου.

149 €
36 Δόσεις 5,14€ / μήνα
Κατόπιν Παραγγελίας

Η σειρά Goldring E Series χρησιμοποιεί διπλούς μαγνήτες χαμηλής μάζας (Magnetic Duplex) οι οποίοι επιδρούν σε ένα πηνίο που είναι τοποθετημένο κατά 45 μοίρες και αυξάνουν τον διαχωρισμό των καναλιών. Μαγνητική τεχνολογία Duplex ™ Όλες οι κεφαλές της σειράς διαθέτουν μαγνητική τεχνολογία Duplex ™ - μια γεννήτρια διπλού μαγνήτη, η οποία ανιχνεύει με μεγαλύτερη ακρίβεια την αυλάκωση εγγραφής, παρέχοντας καλύτερο στερεοφωνικό διαχωρισμό και ένα πιο συναρπαστικό και μουσικό στάδιο ήχου. Εξειδικευμένη ρύθμιση Οι κεφαλές της σειράς E έχουν σχεδιαστεί έτσι ώστε να επιτρέπουν μικρές ρυθμίσεις κατά την εγκατάσταση χρησιμοποιώντας μια ειδική βίδα ρύθμισης. Αυτό σημαίνει ότι η κεφαλή μπορεί να εγκατασταθεί με ασφάλεια ακομα και σε ένα τυπικό πικάπ επειδή έχει προκαθοριστεί η γωνία που κάνει η βελόνα με την επιφάνεια εγγραφής. Το αποτέλεσμα είναι μια βελτιστοποιημένη ισορροπία καναλιών με την απαιτούμενη ρύθμιση οριζόντιας παρακολούθησης. Αυτό εξασφαλίζει συνεπή και ήσυχη απόδοση για τη διάρκεια ζωής του προϊόντος. Με σφαιρικό στυλ της βελόνας , τα μοντέλα E1 και E2 είναι ιδανικά για αναβάθμιση σε οποιοδήποτε προϋπολογισμό.

99 ,95 €
36 Δόσεις 3,45€ / μήνα
Κατόπιν Παραγγελίας

Χειροποίητη Reference κεφαλή κατόπιν ειδικής παραγγελίας Made in England.

4.499 €
36 Δόσεις 155,32€ / μήνα
Κατόπιν Παραγγελίας

Χειροποίητη κεφαλή Moving Coil, Made in England.

799 €
36 Δόσεις 27,58€ / μήνα
Κατόπιν Παραγγελίας

Βελόνα κεφαλής πικάπ DP-300F.

84 ,21 €
36 Δόσεις 2,91€ / μήνα
Κατόπιν Παραγγελίας

Ανταλλακτική βελόνα για DP-200F.

61 ,05 €
36 Δόσεις 2,11€ / μήνα
Κατόπιν Παραγγελίας

The THORENS TAS 1600 is an MC pickup manufactured for THORENS in Japan. The aim of the development was the optimal combination of the pick-up in combination with the TD 1600/1601 turntable and the TP 92 precision tonearm. With an output voltage of 0.6mV (5.5cm/sec) and 12 ohms internal resistance, the pick-up harmonises with all common phono preamplifiers. A naked diamond with line contact cut in combination with a solid boron cantilver guarantee best pickup capability and sound quality.

1.325 €
36 Δόσεις 45,74€ / μήνα
Κατόπιν Παραγγελίας

Κεφαλή πικάπ Audio Technica AT33MONO Moving Coil cartridge με κωνική βελόνα.

410 €
36 Δόσεις 14,15€ / μήνα
Κατόπιν Παραγγελίας

AT-ART1000, special line κεφαλοβελόνα κινούμενου πηνίου της Audio-Technica με σύστημα direct power, που τοποθετει το πηνίο ακριβώς επάνω από την βελόνα προσφέροντας έτσι την καλύτερη δυνατή εμπειρία ακρόασης. Απ. συχν. 15-30000Hz, έξοδος 0.2mV.

5.590 €
36 Δόσεις 192,99€ / μήνα
Κατόπιν Παραγγελίας

AT-ART9XA, κεφαλοβελόνα κινούμενου πηνίου της Audio-Technica με βελόνα shibata σε στήριγμα διαμέτρου 0,28mm, απόκριση συχνότητας 20-50000Hz, διαχωρισμό καναλιών 30dB, έξοδο 0.2mV.

1.799 €
36 Δόσεις 62,11€ / μήνα
Κατόπιν Παραγγελίας

AT-ART9XI, κεφαλοβελόνα κινούμενου πηνίου της Audio-Technica με βελόνα special line σε στήριγμα διαμέτρου 0,28mm, απόκριση συχνότητας 20-50000Hz, διαχωρισμό καναλιών 30dB, έξοδο 0.5mV.

1.799 €
36 Δόσεις 62,11€ / μήνα
Κατόπιν Παραγγελίας

Το AT33Sa είναι το πρώτο μοντέλο της Audio-Technica MC που διαθέτει μια γραφίδα Shibata. Εκτός από την ανώτερη απόδοση υψηλής ευκρίνειας ως γραφίδα επαφής γραμμής, η γραφίδα Shibata παράγει ήχο μεσαίων και μπάσων που είναι ισχυρός και πλούσιος. Η γραφίδα Shibata είναι τοποθετημένη σε κονσόλα βορίου με διπλό αποσβεστήρα.

960 €
36 Δόσεις 33,14€ / μήνα
Κατόπιν Παραγγελίας

Με εξειδικευμένο σώμα και εσωτερική καλωδίωση αφιερωμένη στη μονοφωνική αναπαραγωγή ήχου, η VM610MONO έχει σχεδιαστεί για αναπαραγωγή μονοφωνικών αρχείων. Tο VM610MONO είναι εξοπλισμένο με διπλούς μαγνήτες που είναι εσωτερικά συνδεδεμένοι για να μειώσουν τον θόρυβο και να αποκτήσετε μια εξαιρετικά εστιασμένη εικόνα ήχου που δεν μπορούν να παρέχουν οι στερεοφωνικές.

169 €
36 Δόσεις 5,83€ / μήνα
Κατόπιν Παραγγελίας

Αντί να χρησιμοποιούν ένα μόνο μεγάλο μαγνήτη, οι δύο μαγνήτες είναι διατεταγμένοι σε σχήμα "V". Οι δύο μαγνήτες τοποθετούνται ακριβώς έτσι ώστε να ταιριάζουν με τις θέσεις του αριστερού και του δεξιού καναλιού στα τοιχώματα των στερεοφωνικών αυλάκων. Κατά συνέπεια, ο σχεδιασμός VM εξασφαλίζει εξαιρετικό διαχωρισμό καναλιών, εκτεταμένη απόκριση συχνότητας και εκπληκτική παρακολούθηση.Σύστημα παραγωγής παρα-τοροειδούς.Οι παρατοροειδείς πηνία βελτιώνουν την απόδοση και προσφέρουν εξαιρετική γραμμικότητα, καθώς η διαρροή μαγνητικής ροής σε αυτό το συνεχές και ενιαίο μαγνητικό κύκλωμα είναι χαμηλή. Η διαπερατότητα των πυρήνων βελτιστοποιείται επίσης με τη χρήση πλαστικοποιημένων πυρήνων.Η κεντρική πλάκα θωράκισης μειώνει την παρεμβολή Μια κεντρική πλάκα προστασίας permalloy επιτρέπει τον αποτελεσματικό διαχωρισμό των αριστερών και δεξιών καναλιών, καταστέλλοντας τις ηλεκτρικές παρεμβολές κάτω από 40dB. Αυτό είναι παρόμοιο με την πραγματική τιμή διαύγειας που βρίσκεται στις αυλακώσεις του ίδιου του δίσκου.

489 €
36 Δόσεις 16,88€ / μήνα
Κατόπιν Παραγγελίας

Η κεφαλή VM95 Series με κωνική βελόνα 3,0 mil ταιριάζει με πικάπ στήριξης μισής ίντσας. Ενώ αυτή η κεφαλή έχει σχεδιαστεί για αναπαραγωγή μονοφωνικών εγγραφών 78 RPM, είναι, ωστόσο, μια στερεοφωνική κεφαλή, που επιτρέπει στους χρήστες να επιλέγουν μεταξύ των αριστερών και των δεξιών καναλιών, κάτι που μπορεί να είναι ιδιαίτερα χρήσιμο στην αρχειοθέτηση εφαρμογών για την ελαχιστοποίηση του θορύβου και της παραμόρφωσης. Το ανθεκτικό περίβλημα χαμηλού συντονισμού περιλαμβάνει ένθετα με σπείρωμα που επιτρέπουν  να στερεωθεί στο κέλυφος  με δύο μόνο βίδες - χωρίς παξιμάδια . Δεδομένου ότι όλες οι σειρές VM95 έχουν το ίδιο σώμα, η Βελόνα μπορεί να αντικατασταθεί με οποιοδήποτε από τα έξι εναλλάξιμα στυλ AT-VMN95. Συμβατή με τις ανταλλακτικές βελόνες AT-VMΝ95C, AT-VMΝ95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH, AT-VMN75SP

99 €
36 Δόσεις 3,42€ / μήνα
Κατόπιν Παραγγελίας

Χειροποίητη κεφαλή,Τύπος: VM Stereo Dual Magnet

249 €
36 Δόσεις 8,60€ / μήνα
Κατόπιν Παραγγελίας

Η AT-VM95EN, διαθέτει "γυμνό" ελλειπτικό διαμάντι. Η κατασκευή της είναι ένα διαμάντι ενός τεμαχίου με ένα στρογγυλό κορμό που εισάγεται στο πρόβολο δημιουργεί ένα ελαφρύτερο και πιο άκαμπτο σύστημα μετάδοσης από ένα άκρο διαμαντιού συνδεδεμένο σε στρογγυλό κορμό τιτανίου όπως στην AT-VM95E. Επίσης, η χρήση "γυμνού" διαμαντιού αποκαλύπτει σημαντική διαφορά στην ποιότητα της αναπαραγωγής που θα παρατηρηθεί αμέσως, συγκεκριμένα στην πιστότητα των υψηλών συχνοτήτων και στην ποιότητα των γρήγορων εναλλαγών.Τάση εξόδου 3,5 mV.

149 €
36 Δόσεις 5,14€ / μήνα
Κατόπιν Παραγγελίας

Η AT-VM95C με Έξοδο 4.0 mV. Το νέο μοντέλο Audio-Technica Conical cartridge αντικατάστησε τα θρυλικά μοντέλα της σειράς AT90 όπως τα AT91, AT91R και CN5625AL Η AT-VM95C είναι μια κεφαλή "χαμηλού προϋπολογισμού" που διαθέτει μια κωνική βελόνα , διαθέτει βελτιωμένο και ξεχωριστό σχεδιασμό που έχει ως αποτέλεσμα ένα πιο άκαμπτο περίβλημα, και δύο βιδωτά ένθετα στο σώμα της κεφαλής που επιτρέπουν την τοποθέτησή της στο Shell με δύο μόνο βίδες, χωρίς παξιμάδια. Η συμβατότητα της θα επιτρέψει την αναβάθμιση με οποιοδήποτε βελόνα από τις άλλες 4 της σειράς, όπως η Elliptical, η Elliptical Nude, η Microlinear και η Shibata.

45 €
36 Δόσεις 1,55€ / μήνα
Κατόπιν Παραγγελίας

The VM760SLC special line contact stylus cartridge is the flagship model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM760SLC is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s ultra-lightweight special line contact stylus allows it to trace the record groove with incredible accuracy and minimum abrasion, resulting in nuanced audio reproduction, low distortion and low record wear. Includes mounting hardware.

789 €
36 Δόσεις 27,24€ / μήνα
Κατόπιν Παραγγελίας