Θα σας ειδοποιήσουμε αμέσως μόλις το προϊόν υπάρχει σε stock στην αποθήκη μας! Η εκτέλεση των παραγγελιών θα γίνει με σειρά προτεραιότητας και δεν εγγυούμαστε ότι η τιμή θα παραμείνει η ίδια.
-
36 Δόσεις
-
2 Έτη Εγγύηση
-
36 Δόσεις
-
2 Έτη Εγγύηση
Pure sound without compromise:
The Eversolo DAC-Z10 is designed for true audio enthusiasts seeking the most natural and uncolored reproduction of music. The advanced Eversolo FIA™ (Fully Isolated Architecture) completely separates digital and analog processing to minimize noise and interference. The result is a free-flowing, detailed sound where every tone is sharply defined. Three independent linear power supplies deliver ultra-clean energy to the left channel, right channel, and system, ensuring an exceptionally low noise level of just 42µV.
Balanced design and precision in every detail:
The DAC-Z10 is built on a fully balanced architecture with two independent AK4191 + AK4499 DAC modules, operating separately for the left and right channels. This setup creates a dynamic and precise sound image with excellent channel separation. The integrated R2R volume control maintains signal integrity across all listening levels, preserving the music exactly as the artist intended. Together with AKM’s Velvet Sound technology, it achieves the perfect balance between analytical precision and musical warmth.
Perfect timing with OCXO technology:
To ensure accurate signal reproduction, the DAC-Z10 utilizes an OCXO temperature-controlled crystal oscillator combined with PLL (Phase-Locked Loop) technology. This configuration stabilizes clock timing and eliminates jitter, providing a calm and precise rendering of even the most complex recordings. External 10 MHz and 25 MHz clocks are also supported, allowing you to achieve even greater accuracy in your system.
Advanced connectivity and full control:
With HDMI ARC, dual coaxial and optical inputs, and an isolated USB audio input, the DAC-Z10 offers flexible and noise-free connectivity for any source. A dedicated 6.35 mm headphone amplifier delivers powerful, clean sound with automatic impedance adjustment for headphones ranging from 16 Ohm to 300 Ohm. The large 8.8” IPS touchscreen and intuitive mobile App provide complete control over signal routing, filter settings, balance, and visual VU meters—bringing your music to life both sonically and visually.
Highlights:
- Eversolo FIA™ fully isolated architecture for optimal signal purity
- Dual AK4191 + AK4499 DAC modules for left and right channels
- Precise R2R volume control and fully balanced analog preamplifier
- OCXO temperature-controlled crystal oscillator with PLL technology
- Three separate linear power supplies with ultra-low noise
- HDMI ARC/eARC and 6.35 mm headphone output
- 8.8" IPS touchscreen and mobile App control
- Aviation-grade aluminum chassis with elegant design
- Model: Eversolo DAC-Z10
- Display: 8.8" IPS
- Chassis Material: Aluminium alloy
- Main Processor: DCP8568
- DAC:
- Left Channel: AK4191 + AK4499
- Right Channel: AK4191 + AK4499
- Audio Processor: Multi-core USB audio processor
- OPA Chip: OPA1612
- Power: Triple ultra-low noise linear power supplies
- Bluetooth Audio Input: Qualcomm QCC5125, Bluetooth 5.0; supports SBC / AAC protocols
- USB-B Audio Input: Compatible with Windows 10+, macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768 kHz 32-bit
- IIS Input: 8 mode configurations, up to Stereo DSD512 / PCM 768 kHz 32-bit
- AES/EBU Input: Up to Stereo PCM 192 kHz / 24-bit / DSD64 DoP
- Optical Audio Inputs × 2: Up to Stereo PCM 192 kHz / 24-bit / DSD64 DoP
- Coaxial Audio Inputs × 2: Up to Stereo PCM 192 kHz / 24-bit / DSD64 DoP
- ARC Input: Up to Stereo PCM 192 kHz / 24-bit
- Analog Audio Inputs: XLR (Balanced), RCA
- Analog Audio Outputs: Pre-out – XLR (Balanced), RCA; Headphone out – 6.35 mm single-ended
- External Clock Input: Supports 10 M / 25 M clock inputs (50 Ω or 75 Ω impedance)
- Recommended Headphone Impedance: 16–300 Ω (Low Gain 16–32 Ω / High Gain 32–300 Ω)
- XLR Output Audio Characteristics:
- Output Level: 5 Vrms @ 0 dBFS
- THD+N @ 1 kHz: 0.00008 % (–122 dB)
- Noise: < 1.2 µVrms
- SNR (A-wt): 130 dB
- Frequency Response: 20 Hz – 20 kHz (±0.1 dB)
- Crosstalk: –130 dB
- DNR (A-wt): 130 dB
- RCA Output Audio Characteristics:
- Output Level: 2.5 Vrms @ 0 dBFS
- THD+N @ 1 kHz: 0.000097 % (–120 dB)
- Noise: < 1.5 µVrms
- SNR (A-wt): 128 dB
- Frequency Response: 20 Hz – 20 kHz (±0.1 dB)
- Crosstalk: –123 dB
- DNR (A-wt): 128 dB
- Headphone Output Audio Characteristics (Low Gain):
- Output Level: 4 Vrms @ 0 dBFS
- THD+N @ 1 kHz: 0.0003 % (–110 dB)
- Noise: < 2.5 µVrms
- SNR (A-wt): 124 dB
- Frequency Response: 20 Hz – 20 kHz (±0.1 dB)
- DNR (A-wt): 124 dB
- Headphone Output Audio Characteristics (Mid Gain):
- Output Level: 5.6 Vrms @ 0 dBFS
- THD+N @ 1 kHz: 0.00018 % (–115 dB)
- Noise: < 2.5 µVrms
- SNR (A-wt): 126 dB
- Frequency Response: 20 Hz – 20 kHz (±0.1 dB)
- DNR (A-wt): 126 dB
- Headphone Output Audio Characteristics (High Gain):
- Output Level: 7 Vrms @ 0 dBFS
- THD+N @ 1 kHz: 0.00013 % (–118 dB)
- Noise: < 2.5 µVrms
- SNR (A-wt): 127 dB
- Frequency Response: 20 Hz – 20 kHz (±0.1 dB)
- DNR (A-wt): 127 dB
- Power Supply: AC 100 – 240 V 50/60 Hz
- USB Port: USB 2.0 × 1 (for firmware upgrade only)
- Control Methods: Touchscreen control, remote control, mobile App control
- Rated Power Consumption: 32 W
- Dimensions (L × W × H): 365 × 310 × 88 mm
- Packing List: Remote control, power cable, USB data cable, USB drive (for FW upgrade), trigger cable, polishing cloth, user manual
Πως βαθμολογείτε αυτό το προϊόν;
Ειδοποίηση Αποθέματος