Dali

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

The launch of the DALI SUB E-9 F marks a new stage of what is possible at this level of subwoofers!The SUB E-9 features a 9” woofer, capable of moving lots of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior. Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier!The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, wellbalanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.The back plate of SUB E-9 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up.SUB E-9 F is elevated from the floor by cone shaped rubber feet, while a down-firing bass port allows positioning directly against the wall. The DALI SUB E-9 F is recommended as compliment to the KUBIK FREE as well as the compact models of the ZENSOR and FAZON series. On top of this it is compatible with all DALI loudspeakers as the perfect completion of a DALI stereo or surround set up. HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.ALUMINIUM BASEGiving the illusion that the subwoofer is floating on air, the elegant aluminium base decouples the subwoofer from the floor and integrate seamlessly to the room.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs.ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance. Specifications :Frequency Range (+/-3 dB) [Hz]37 - 200Maximum SPL [dB]111Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 9" long strokeLow frequency driver, Diaphragm typeAluminium Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]39.0Max. Amplifier Power Output [RMS watt]220Continous IEC Power Output [RMS watt]170Input Impedance [ohms]25kConnection InputMono (LFE) RCA Stereo (low-pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]    10 - 30FunctionsCrossover Frequency Phase Switch Standby (Auto Power) On/Off Switch Volume (Gain) Max. Power Consumption [W]250Dimensions With Base (HxWxD) [mm]  307 x 288 x 311Weight [kg]11.0Accessories IncludedManual 

The launch of the DALI SUB E-9 F marks a new stage of what is possible at this level of subwoofers!The SUB E-9 features a 9” woofer, capable of moving lots of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior. Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier!The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, wellbalanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.The back plate of SUB E-9 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up.SUB E-9 F is elevated from the floor by cone shaped rubber feet, while a down-firing bass port allows positioning directly against the wall. The DALI SUB E-9 F is recommended as compliment to the KUBIK FREE as well as the compact models of the ZENSOR and FAZON series. On top of this it is compatible with all DALI loudspeakers as the perfect completion of a DALI stereo or surround set up. HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.ALUMINIUM BASEGiving the illusion that the subwoofer is floating on air, the elegant aluminium base decouples the subwoofer from the floor and integrate seamlessly to the room.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs.ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance. Specifications :Frequency Range (+/-3 dB) [Hz]37 - 200Maximum SPL [dB]111Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 9" long strokeLow frequency driver, Diaphragm typeAluminium Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]39.0Max. Amplifier Power Output [RMS watt]220Continous IEC Power Output [RMS watt]170Input Impedance [ohms]25kConnection InputMono (LFE) RCA Stereo (low-pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]    10 - 30FunctionsCrossover Frequency Phase Switch Standby (Auto Power) On/Off Switch Volume (Gain) Max. Power Consumption [W]250Dimensions With Base (HxWxD) [mm]  307 x 288 x 311Weight [kg]11.0Accessories IncludedManual 

Taking centre stage, the SPEKTOR VOKAL delivers clarity and depth to any movie. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.If you are looking for an affordable center channel, the SPEKTOR VOKAL will meet your expectations. It is serving up a detailed, dynamic and powerful audio reproduction and is a perfect match with any of the three models in the SPEKTOR series: SPEKTOR 1, SPEKTOR 2 and SPEKTOR 6 speakers. No matter if you are planning to use it in a 3.1 or 5.1 surround setup in your Home Cinema.Like all DALI loudspeakers, the SPEKTOR VOKAL has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live concert experience. WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.AMPLIFIER FRIENDLYThe amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).LOW SIGNAL LOSSBy using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.

The DALI SPEKTOR 1 brings the DALI sound design principals to a new price bracket, opening the possibility for many new music and movies lovers to experience the seduction of true Hi-Fi. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and knowhow, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.The DALI SPEKTOR 1, like all DALI loudspeakers, has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.The ultra-compact SPEKTOR 1 - and its slightly larger sibling SPEKTOR 2 - are ideal for wall mounting, shelf or stand positioning in combination with any compact Hi-Fi music system. WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.AMPLIFIER FRIENDLYThe amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).LOW SIGNAL LOSSBy using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero. Specifications :Frequency Range (+/-3 dB) [Hz]59 - 26,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4,5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]58.0 HzConnection InputSingle Wire Recommended PlacementShelf or stand On-Wall Recommended Distance From Wall [cm]    1 - 50 cmDimensions (HxWxD) [mm]237 x 140 x 195 mmWeight [kg]2.6 kgAccessories IncludedRubber Feet Manual Wall Bracket 

The DALI SPEKTOR 1 brings the DALI sound design principals to a new price bracket, opening the possibility for many new music and movies lovers to experience the seduction of true Hi-Fi. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and knowhow, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.The DALI SPEKTOR 1, like all DALI loudspeakers, has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.The ultra-compact SPEKTOR 1 - and its slightly larger sibling SPEKTOR 2 - are ideal for wall mounting, shelf or stand positioning in combination with any compact Hi-Fi music system. WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.AMPLIFIER FRIENDLYThe amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).LOW SIGNAL LOSSBy using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero. Specifications :Frequency Range (+/-3 dB) [Hz]59 - 26,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4,5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]58.0 HzConnection InputSingle Wire Recommended PlacementShelf or stand On-Wall Recommended Distance From Wall [cm]    1 - 50 cmDimensions (HxWxD) [mm]237 x 140 x 195 mmWeight [kg]2.6 kgAccessories IncludedRubber Feet Manual Wall Bracket 

Whether the task is to fill the room with stereo music or to feel the subtle tremor from a movie soundtrack the new DALI SUB K-14 F will deliver!Build around a 14” aluminium long stroke woofer and with a 500 watts class D amplifier the DALI SUB K-14 F has the power and the control for both impressive movie- and delightful music reproduction. Connect the sub to your amplifier through LFE or line-out, and prepare to be pushed down in your seat.Find other DALI Subwoofers or take a look at our loudspeaker series. Features of the SUB K-14 F14” aluminium long stroke woofer500 watts class D amplifierSolid aluminium baseWhite or black cabinetHigh gloss white or black front baffleCombination of use:DALI recommends applying this subwoofer with for example RUBICON, OPTICON and ZENSOR systems. However, customer with speakers from other brands will surely find what they need in this sub. RIGID CONE STRUCTUREThe rigid cone structure based on either aluminium or cone fiber eliminates the need for a dust-cap and helps ensure a piston-like behaviour of the woofer.HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs.ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance. Specifications :Frequency Range (+/-3 dB) [Hz]29 - 160Maximum SPL [dB]115Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 14" long strokeLow frequency driver, Diaphragm typeAluminium Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]34Max. Amplifier Power Output [RMS watt]    500Continous IEC Power Output [RMS watt]450Input Impedance [ohms]10kConnection InputMono (LFE) RCA Stereo (low-pass filtered) Magnetic ShieldingNoRecommended PlacementFloor FunctionsCrossover Frequency Phase Switch Standby (Auto Power) On/Off Switch Volume (Gain) Max. Power Consumption [W]650Dimensions With Base (HxWxD) [mm]429 x 396 x 428Weight [kg]26.4Accessories IncludedManual Spikes M8 

The launch of the DALI SUB E-12 F marks a new stage of what is possible at this level of subwoofers.The SUB E-12 features a 12” woofer, capable of moving plenty of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior.Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier!The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, well-balanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.The back plate of SUB E-12 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up.The DALI SUB E-12 F is recommended as compliment to the OPTICON, ZENSOR and SPEKTOR series and is compatible with all DALI loudspeakers as the perfect completion of a DALI surround set up. ALUMINIUM BASEGiving the illusion that the subwoofer is floating on air, the elegant aluminium base decouples the subwoofer from the floor and integrate seamlessly to the room.ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance.HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs. Specifications :Frequency Range (+/-3 dB) [Hz]28 - 190Maximum SPL [dB]112Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 12" long strokeLow frequency driver, Diaphragm typePolymere Aluminimum Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]36.0Max. Amplifier Power Output [RMS watt]220Continous IEC Power Output [RMS watt]170Input Impedance [ohms]25kConnection InputMono Line Level (LFE) RCA Stereo Line Level (low pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]    > 5FunctionsCrossover Frequency Phase Switch Standby (Auto Power) On/Off Switch Volume (Gain) Max. Power Consumption [W]250Dimensions With Base (HxWxD) [mm]370 x 340 x 380Weight [kg]14.7Accessories IncludedManual Rubber Bumpers Spikes M6 

The DALI SPEKTOR 6 is the power-house of the SPEKTOR family. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.If you are looking for affordable floorstanding speakers, which delivers a punch, the SPEKTOR 6 is the perfect match for you.They are serving up a detailed, dynamic and powerful audio reproduction and are the perfect choice for any stereo or surround setup in combination with either the SPEKTOR 1 or SPEKTOR 2 compact speakers.The DALI SPEKTOR 6, like all DALI loudspeakers, has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience. WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.AMPLIFIER FRIENDLYThe amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).LOW SIGNAL LOSSBy using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero. Specifications :Frequency Range (+/-3 dB) [Hz]43 - 26,000 HzSensitivity (2,83 V/1 m) [dB]88.5 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]109 dBRecommended Amplifier Power [W]30 - 150 WattCrossover Frequency [Hz]2,500 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 25 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity2 x 6,5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]41.0 HzConnection InputSingle Wire Recommended PlacementFloor Recommended Distance From Wall [cm]    20 - 100 cmDimensions (HxWxD) [mm]972 x 195 x 313 mmWeight [kg]13.8 kgAccessories IncludedSpikes Rubber Feet Manual 

The DALI SUB P-10 DSS is designed with the goal to set standards for subwooferperformance and experience in your listening room or dedicated home theater. Unlike many subwoofers in the market the DALI SUB P-10 DSS has been engineered to perform equally well with both music and movies. It is important to us that a subwoofer is capable of rendering a performance true to the input signal. Therefore a DALI subwoofer is everything but a ‘boombox’.3 x 10 inch long stroke design woofers featuring rigid carbon fiber cones, dual spider, low loss suspension, and massive magnet system are fitted into an elegantly styled, Compact enclosure and combined with a powerful digital amplifier with a dynamic output of 500W RMS. DALI SUB P-10 DSS features a solid, down-firing woofer, able to move lots of air.The P-10 DSS remote controlled subwoofer, with individual settings and memory for stereo and theater, will be the competent upgrade to high-end stereo and home theater systems.Combination of use DALI recommends applying the subwoofer with e.g. EPICON, RUBICON and FAZON F5systems. APPLICATION But also customers with speakers from other brands will surely find what they need in this subwoofer. The design, technology, and construction of this subwoofer make it a perfect upgrade of any mid to high end loudspeaker system.More details are available in the Whitepaper. ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs.HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.RIGID CONE STRUCTUREThe rigid cone structure based on either aluminium or cone fiber eliminates the need for a dust-cap and helps ensure a piston-like behaviour of the woofer. Specifications :Frequency Range (+/-3 dB) [Hz]24 - 250Maximum SPL [dB]112Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 10" long strokeLow frequency driver, Diaphragm typeCarbon fibre cone Low frequency passive driver, Quantity2 x 10" long strokeLow frequency passive driver, Diaphragm type    Carbon fibre cone Enclosure typeClosed Box With Dual Passive Radiators Max. Amplifier Power Output [RMS watt]500Continous IEC Power Output [RMS watt]300Input Impedance [ohms]26kConnection InputMono (LFE) RCA Stereo (low-pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]> 5FunctionsCinema/Hifi Switch Crossover Frequency Standby (Auto Power) On/Off Switch Standby (Auto Power) On/Off Variable Phase Control Volume (Gain) Max. Power Consumption [W]550Dimensions With Base (HxWxD) [mm]370 x 340 x 340Weight [kg]19.5Accessories IncludedManual Remote Control Spikes M10 

The DALI SUB P-10 DSS is designed with the goal to set standards for subwooferperformance and experience in your listening room or dedicated home theater. Unlike many subwoofers in the market the DALI SUB P-10 DSS has been engineered to perform equally well with both music and movies. It is important to us that a subwoofer is capable of rendering a performance true to the input signal. Therefore a DALI subwoofer is everything but a ‘boombox’.3 x 10 inch long stroke design woofers featuring rigid carbon fiber cones, dual spider, low loss suspension, and massive magnet system are fitted into an elegantly styled, Compact enclosure and combined with a powerful digital amplifier with a dynamic output of 500W RMS. DALI SUB P-10 DSS features a solid, down-firing woofer, able to move lots of air.The P-10 DSS remote controlled subwoofer, with individual settings and memory for stereo and theater, will be the competent upgrade to high-end stereo and home theater systems.Combination of use DALI recommends applying the subwoofer with e.g. EPICON, RUBICON and FAZON F5systems. APPLICATION But also customers with speakers from other brands will surely find what they need in this subwoofer. The design, technology, and construction of this subwoofer make it a perfect upgrade of any mid to high end loudspeaker system.More details are available in the Whitepaper. ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs.HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.RIGID CONE STRUCTUREThe rigid cone structure based on either aluminium or cone fiber eliminates the need for a dust-cap and helps ensure a piston-like behaviour of the woofer. Specifications :Frequency Range (+/-3 dB) [Hz]24 - 250Maximum SPL [dB]112Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 10" long strokeLow frequency driver, Diaphragm typeCarbon fibre cone Low frequency passive driver, Quantity2 x 10" long strokeLow frequency passive driver, Diaphragm type    Carbon fibre cone Enclosure typeClosed Box With Dual Passive Radiators Max. Amplifier Power Output [RMS watt]500Continous IEC Power Output [RMS watt]300Input Impedance [ohms]26kConnection InputMono (LFE) RCA Stereo (low-pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]> 5FunctionsCinema/Hifi Switch Crossover Frequency Standby (Auto Power) On/Off Switch Standby (Auto Power) On/Off Variable Phase Control Volume (Gain) Max. Power Consumption [W]550Dimensions With Base (HxWxD) [mm]370 x 340 x 340Weight [kg]19.5Accessories IncludedManual Remote Control Spikes M10 

The launch of the DALI SUB E-12 F marks a new stage of what is possible at this level of subwoofers.The SUB E-12 features a 12” woofer, capable of moving plenty of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior.Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier!The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, well-balanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.The back plate of SUB E-12 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up.The DALI SUB E-12 F is recommended as compliment to the OPTICON, ZENSOR and SPEKTOR series and is compatible with all DALI loudspeakers as the perfect completion of a DALI surround set up. ALUMINIUM BASEGiving the illusion that the subwoofer is floating on air, the elegant aluminium base decouples the subwoofer from the floor and integrate seamlessly to the room.ELEGANT AND SIMPLE DESIGNThe cabinet is designed to fit perfectly to the size of the woofer, but without forgoing the inner volume that is needed to produce a powerful bass performance.HIGH-YIELD AMPLIFIERAll the amplifiers in the DALI subwoofers have the stamina to keep a high-yield performance and the headroom to draw out that little extra when needed.FLEXIBLE CONNECTIVITYAll DALI subwoofers are compatible with almost any amplifier, receiver or processor due to the choice of LFE or LINE inputs. Specifications :Frequency Range (+/-3 dB) [Hz]28 - 190Maximum SPL [dB]112Crossover Frequency [Hz]40 - 120Low frequency driver, Quantity1 x 12" long strokeLow frequency driver, Diaphragm typePolymere Aluminimum Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]36.0Max. Amplifier Power Output [RMS watt]220Continous IEC Power Output [RMS watt]170Input Impedance [ohms]25kConnection InputMono Line Level (LFE) RCA Stereo Line Level (low pass filtered) Magnetic ShieldingNoRecommended PlacementFloor Recommended Distance From Wall [cm]    > 5FunctionsCrossover Frequency Phase Switch Standby (Auto Power) On/Off Switch Volume (Gain) Max. Power Consumption [W]250Dimensions With Base (HxWxD) [mm]370 x 340 x 380Weight [kg]14.7Accessories IncludedManual Rubber Bumpers Spikes M6 

It is with great pleasure that we introduce you to the DALI MENUET - a small, yet powerful loudspeaker that reveals great musicality that will set new standards for sound and performance from a compact speaker.Conceptually, DALI MENUET is a compact bass reflex loudspeaker measuring only 25 x 15 x 23 cm/9.8 x 5.9 x 9.0”.Even though it is only based on a 4.5” woofer and a 28 mm/1.1” soft dome it more than makes the grade. Listen to these brilliant tiny loudspeakers and you will hear plenty of clean, undistorted bass, open and dynamic midrange and detailed/crisp highs.For optimum performance, DALI MENUET should be positioned in a bookshelf or mounted on the wall using an optional wall bracket. With two threaded inserts on the rear of the cabinet, it is prepared for easy installation of the wall bracket without any hassle. The bracket is designed to ensure optimal clearance between the wall and the bass reflex port.The neat and clean design - makes it very easy to place the tiny DALI MENUET anywhere around the house. Alternatively, combine them with other speakers in the acclaimed RUBICON series for a high-performance stereo set-up or home cinema system. Either way, you’re in for an experience. DRIVERSThe 4.5” woofer is airflow optimized to achieve the best possible coupling between the wood fiber cone and the real wood veneer cabinet. Even the woofer cut-out in the cabinet is made larger than normal to optimise openness and dynamic response.The oversized 28 mm/1.1” soft dome tweeter is able to start and stop with great speed and precision due to the very low mass of the dome assembly and a powerful motor system (the dome is approximately 30% lighter than comparable standard domes and the magnet in the motor system is made of the strongest neodymium material available). The DALI designed drivers, sturdy binding posts and high quality crossover is the key to achieving extraordinary performance from such a compact loudspeaker. INTEGRATED BASS PORTWith the bass port integrated in the terminal tray, the DALI MENUET provides the brilliant option for an on-wall- or near wall placement.CABINET DESIGNThe compact cabinet construction of the DALI MENUET optimizes the volume of the cabinet, and the round shapes creates the perfect finish.DOME TWEETERIn spite of the compact size, the DALI MENUET is produced with an oversized dome tweeter creating a perfect fusion with the woofer.WOOFERThe low loss woofer is fitted with an extra-strong magnet system enabling the woofer to create a huge sound performance.  Specifications : Product seriesDALI MENUETFrequency Range (+/-3 dB) [Hz]59 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]4Maximum SPL [dB]105Recommended Amplifier Power [W]20 - 100Crossover Frequency [Hz]3High frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4½"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]63.0Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  > 2Dimensions With Base (HxWxD) [mm]250 x 150 x 230Weight [kg]4.1Accessories IncludedManual Rubber Bumpers Optional AccessoriesWall Bracket  

It is with great pleasure that we introduce you to the DALI MENUET - a small, yet powerful loudspeaker that reveals great musicality that will set new standards for sound and performance from a compact speaker.Conceptually, DALI MENUET is a compact bass reflex loudspeaker measuring only 25 x 15 x 23 cm/9.8 x 5.9 x 9.0”.Even though it is only based on a 4.5” woofer and a 28 mm/1.1” soft dome it more than makes the grade. Listen to these brilliant tiny loudspeakers and you will hear plenty of clean, undistorted bass, open and dynamic midrange and detailed/crisp highs.For optimum performance, DALI MENUET should be positioned in a bookshelf or mounted on the wall using an optional wall bracket. With two threaded inserts on the rear of the cabinet, it is prepared for easy installation of the wall bracket without any hassle. The bracket is designed to ensure optimal clearance between the wall and the bass reflex port.The neat and clean design - makes it very easy to place the tiny DALI MENUET anywhere around the house. Alternatively, combine them with other speakers in the acclaimed RUBICON series for a high-performance stereo set-up or home cinema system. Either way, you’re in for an experience. DRIVERSThe 4.5” woofer is airflow optimized to achieve the best possible coupling between the wood fiber cone and the real wood veneer cabinet. Even the woofer cut-out in the cabinet is made larger than normal to optimise openness and dynamic response.The oversized 28 mm/1.1” soft dome tweeter is able to start and stop with great speed and precision due to the very low mass of the dome assembly and a powerful motor system (the dome is approximately 30% lighter than comparable standard domes and the magnet in the motor system is made of the strongest neodymium material available). The DALI designed drivers, sturdy binding posts and high quality crossover is the key to achieving extraordinary performance from such a compact loudspeaker. INTEGRATED BASS PORTWith the bass port integrated in the terminal tray, the DALI MENUET provides the brilliant option for an on-wall- or near wall placement.CABINET DESIGNThe compact cabinet construction of the DALI MENUET optimizes the volume of the cabinet, and the round shapes creates the perfect finish.DOME TWEETERIn spite of the compact size, the DALI MENUET is produced with an oversized dome tweeter creating a perfect fusion with the woofer.WOOFERThe low loss woofer is fitted with an extra-strong magnet system enabling the woofer to create a huge sound performance.  Specifications : Product seriesDALI MENUETFrequency Range (+/-3 dB) [Hz]59 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]4Maximum SPL [dB]105Recommended Amplifier Power [W]20 - 100Crossover Frequency [Hz]3High frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4½"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]63.0Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  > 2Dimensions With Base (HxWxD) [mm]250 x 150 x 230Weight [kg]4.1Accessories IncludedManual Rubber Bumpers Optional AccessoriesWall Bracket  

It is with great pleasure that we introduce you to the DALI MENUET - a small, yet powerful loudspeaker that reveals great musicality that will set new standards for sound and performance from a compact speaker.Conceptually, DALI MENUET is a compact bass reflex loudspeaker measuring only 25 x 15 x 23 cm/9.8 x 5.9 x 9.0”.Even though it is only based on a 4.5” woofer and a 28 mm/1.1” soft dome it more than makes the grade. Listen to these brilliant tiny loudspeakers and you will hear plenty of clean, undistorted bass, open and dynamic midrange and detailed/crisp highs.For optimum performance, DALI MENUET should be positioned in a bookshelf or mounted on the wall using an optional wall bracket. With two threaded inserts on the rear of the cabinet, it is prepared for easy installation of the wall bracket without any hassle. The bracket is designed to ensure optimal clearance between the wall and the bass reflex port.The neat and clean design - makes it very easy to place the tiny DALI MENUET anywhere around the house. Alternatively, combine them with other speakers in the acclaimed RUBICON series for a high-performance stereo set-up or home cinema system. Either way, you’re in for an experience. DRIVERSThe 4.5” woofer is airflow optimized to achieve the best possible coupling between the wood fiber cone and the real wood veneer cabinet. Even the woofer cut-out in the cabinet is made larger than normal to optimise openness and dynamic response.The oversized 28 mm/1.1” soft dome tweeter is able to start and stop with great speed and precision due to the very low mass of the dome assembly and a powerful motor system (the dome is approximately 30% lighter than comparable standard domes and the magnet in the motor system is made of the strongest neodymium material available). The DALI designed drivers, sturdy binding posts and high quality crossover is the key to achieving extraordinary performance from such a compact loudspeaker. INTEGRATED BASS PORTWith the bass port integrated in the terminal tray, the DALI MENUET provides the brilliant option for an on-wall- or near wall placement.CABINET DESIGNThe compact cabinet construction of the DALI MENUET optimizes the volume of the cabinet, and the round shapes creates the perfect finish.DOME TWEETERIn spite of the compact size, the DALI MENUET is produced with an oversized dome tweeter creating a perfect fusion with the woofer.WOOFERThe low loss woofer is fitted with an extra-strong magnet system enabling the woofer to create a huge sound performance.  Specifications : Product seriesDALI MENUETFrequency Range (+/-3 dB) [Hz]59 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]4Maximum SPL [dB]105Recommended Amplifier Power [W]20 - 100Crossover Frequency [Hz]3High frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4½"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]63.0Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  > 2Dimensions With Base (HxWxD) [mm]250 x 150 x 230Weight [kg]4.1Accessories IncludedManual Rubber Bumpers Optional AccessoriesWall Bracket  

It is with great pleasure that we introduce you to the DALI MENUET - a small, yet powerful loudspeaker that reveals great musicality that will set new standards for sound and performance from a compact speaker.Conceptually, DALI MENUET is a compact bass reflex loudspeaker measuring only 25 x 15 x 23 cm/9.8 x 5.9 x 9.0”.Even though it is only based on a 4.5” woofer and a 28 mm/1.1” soft dome it more than makes the grade. Listen to these brilliant tiny loudspeakers and you will hear plenty of clean, undistorted bass, open and dynamic midrange and detailed/crisp highs.For optimum performance, DALI MENUET should be positioned in a bookshelf or mounted on the wall using an optional wall bracket. With two threaded inserts on the rear of the cabinet, it is prepared for easy installation of the wall bracket without any hassle. The bracket is designed to ensure optimal clearance between the wall and the bass reflex port.The neat and clean design - makes it very easy to place the tiny DALI MENUET anywhere around the house. Alternatively, combine them with other speakers in the acclaimed RUBICON series for a high-performance stereo set-up or home cinema system. Either way, you’re in for an experience. DRIVERSThe 4.5” woofer is airflow optimized to achieve the best possible coupling between the wood fiber cone and the real wood veneer cabinet. Even the woofer cut-out in the cabinet is made larger than normal to optimise openness and dynamic response.The oversized 28 mm/1.1” soft dome tweeter is able to start and stop with great speed and precision due to the very low mass of the dome assembly and a powerful motor system (the dome is approximately 30% lighter than comparable standard domes and the magnet in the motor system is made of the strongest neodymium material available). The DALI designed drivers, sturdy binding posts and high quality crossover is the key to achieving extraordinary performance from such a compact loudspeaker. INTEGRATED BASS PORTWith the bass port integrated in the terminal tray, the DALI MENUET provides the brilliant option for an on-wall- or near wall placement.CABINET DESIGNThe compact cabinet construction of the DALI MENUET optimizes the volume of the cabinet, and the round shapes creates the perfect finish.DOME TWEETERIn spite of the compact size, the DALI MENUET is produced with an oversized dome tweeter creating a perfect fusion with the woofer.WOOFERThe low loss woofer is fitted with an extra-strong magnet system enabling the woofer to create a huge sound performance.  Specifications : Product seriesDALI MENUETFrequency Range (+/-3 dB) [Hz]59 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]4Maximum SPL [dB]105Recommended Amplifier Power [W]20 - 100Crossover Frequency [Hz]3High frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4½"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeBass Reflex Bass Reflex Tuning Frequency [Hz]63.0Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  > 2Dimensions With Base (HxWxD) [mm]250 x 150 x 230Weight [kg]4.1Accessories IncludedManual Rubber Bumpers Optional AccessoriesWall Bracket  

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. Included with the FAZON MIKRO is a multi function bracket which works as a slim wall bracket or a kick stand for the FAZON MIKRO VOKAL.This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module. The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent. The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie. The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button TerminalsEasy to use push button terminals make connecting  the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance. Paired with the FAZON SUB 1 you have the perfect solution for a small living room. INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker.MAGNETIC GRILLESAll products of the FAZON series come with exclusive magnetic grilles enabling an easy click-on function.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Centre / Soundbar Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]113 x 196 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. Included with the FAZON MIKRO is a multi function bracket which works as a slim wall bracket or a kick stand for the FAZON MIKRO VOKAL.This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module. The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent. The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie. The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button TerminalsEasy to use push button terminals make connecting  the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance. Paired with the FAZON SUB 1 you have the perfect solution for a small living room. INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker.MAGNETIC GRILLESAll products of the FAZON series come with exclusive magnetic grilles enabling an easy click-on function.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Centre / Soundbar Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]113 x 196 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

Following the design lines of the very popular MENTOR MENUET, the RUBICON seriesbuilds on a well known design language and takes it to new heights.The RUBICON 2 stand loudspeaker is the perfect blend between compact size and large sound performance. With the solid MDF cabinet, the RUBICON 2 has a perfect working environment for its ultra-light 29 mm soft dome tweeter, 6.5 inch wood fibre low-loss driver, and gold-plated terminals. It is rich on detail with an impressive soundstage and has surprisingly large bass reproduction with both precision and timing.Available in four finishes – HighGloss White, High-Gloss Black, Rosso and Walnut – the RUBICON 2 comes complete with rubber feet to hold it firmly in position and, to help keep it at its aesthetic as well as acoustic best.The RUBICON 2 can be included in different variations of surround setups, e.g. a pair of RUBICON 8, RUBICON 6 or RUBICON 5, a RUBICON VOKAL and a SUB M-10 D. SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.SOFT DOME TWEETERWith a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output. Specifications :Frequency Range (+/-3 dB) [Hz] : 50 - 26.000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 107Recommended Amplifier Power [W] : 40 - 150Crossover Frequency [Hz] : 3,1Crossover Principle : 2-wayHigh frequency driver, Quantity : 1 x 29 mmHigh frequency driver, Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Connection Input : Single Wire Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : 20 - 120Dimensions With Base (HxWxD) [mm] : 353 x 195 x 335Weight [kg] : 8.0Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers 

Following the design lines of the very popular MENTOR MENUET, the RUBICON seriesbuilds on a well known design language and takes it to new heights.The RUBICON 2 stand loudspeaker is the perfect blend between compact size and large sound performance. With the solid MDF cabinet, the RUBICON 2 has a perfect working environment for its ultra-light 29 mm soft dome tweeter, 6.5 inch wood fibre low-loss driver, and gold-plated terminals. It is rich on detail with an impressive soundstage and has surprisingly large bass reproduction with both precision and timing.Available in four finishes – HighGloss White, High-Gloss Black, Rosso and Walnut – the RUBICON 2 comes complete with rubber feet to hold it firmly in position and, to help keep it at its aesthetic as well as acoustic best.The RUBICON 2 can be included in different variations of surround setups, e.g. a pair of RUBICON 8, RUBICON 6 or RUBICON 5, a RUBICON VOKAL and a SUB M-10 D. SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.SOFT DOME TWEETERWith a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output. Specifications :Frequency Range (+/-3 dB) [Hz] : 50 - 26.000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 107Recommended Amplifier Power [W] : 40 - 150Crossover Frequency [Hz] : 3,1Crossover Principle : 2-wayHigh frequency driver, Quantity : 1 x 29 mmHigh frequency driver, Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Connection Input : Single Wire Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : 20 - 120Dimensions With Base (HxWxD) [mm] : 353 x 195 x 335Weight [kg] : 8.0Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers 

Following the design lines of the very popular MENTOR MENUET, the RUBICON seriesbuilds on a well known design language and takes it to new heights.The RUBICON 2 stand loudspeaker is the perfect blend between compact size and large sound performance. With the solid MDF cabinet, the RUBICON 2 has a perfect working environment for its ultra-light 29 mm soft dome tweeter, 6.5 inch wood fibre low-loss driver, and gold-plated terminals. It is rich on detail with an impressive soundstage and has surprisingly large bass reproduction with both precision and timing.Available in four finishes – HighGloss White, High-Gloss Black, Rosso and Walnut – the RUBICON 2 comes complete with rubber feet to hold it firmly in position and, to help keep it at its aesthetic as well as acoustic best.The RUBICON 2 can be included in different variations of surround setups, e.g. a pair of RUBICON 8, RUBICON 6 or RUBICON 5, a RUBICON VOKAL and a SUB M-10 D. SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.SOFT DOME TWEETERWith a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output. Specifications :Frequency Range (+/-3 dB) [Hz] : 50 - 26.000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 107Recommended Amplifier Power [W] : 40 - 150Crossover Frequency [Hz] : 3,1Crossover Principle : 2-wayHigh frequency driver, Quantity : 1 x 29 mmHigh frequency driver, Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Connection Input : Single Wire Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : 20 - 120Dimensions With Base (HxWxD) [mm] : 353 x 195 x 335Weight [kg] : 8.0Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers 

By combining appealing Danish design, genuine materials and excellence in driver- and speaker development, you get a high performance satellite loudspeaker for on-wall mounting by choosing the FAZON LCR. The satellite speaker can be used both for stereo or multi channel setups - even as a center channel speaker.DALI FAZON LCR comes with a patent pending wall bracket, which makes connectivity and correct polarity very easy, no matter how the speaker is mounted. FAZON LCR is a versatile loudspeaker, which fits a modern lifestyle, where high performance and a compact form factor is in quest.Sound & Build QualityThe drivers in FAZON LCR have a lot of similarities with the drivers used in the multiple award winning DALI IKON and MENTOR speakers. The cabinet is made of die cast aluminum, which makes it possible to create an asymmetrical shape with internal bracings, which will suppress both acoustic and mechanical resonances in the cabinet structure.FAZON LCR 3.1In some rooms it can be difficult to accommodate surround speakers or to run the necessary cables. An obvious solution may be to go for a 3.1 system, for instance three FAZON LCR and the FAZON SUB 1. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.MAGNETIC GRILLESAll products of the FAZON series come with exclusive magnetic grilles enabling an easy click-on function. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]78 - 25,000Sensitivity (2,83 V/1 m) [dB]89.0Nominal Impedance [ohms]6Maximum SPL [dB]107Recommended Amplifier Power [W]15 - 120Crossover Frequency [Hz]3,000 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity2 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Dimensions With Base (HxWxD) [mm]  385 x 157 x 117Weight [kg]3.5Accessories IncludedInstallation Templates Manual Mounting Brackets Wall Bracket 

FAZON SAT is a two-way designed satellite loudspeaker including a 4½” mid/woofer with wood fibre cone and an oversized 28mm/1.1” soft dome tweeter with a powerful neodymium magnet system. The drivers share the same technology platform as the drivers developed for the acclaimed MENTOR and IKON series.  Equipped with a 360º pivoting wall bracket, FAZON SAT offers a flexible and innovative “Twist ‘n‘ Tilt” function. You can angle the speaker precisely horizontally and vertically; tilt it up or down, swivel it to either side and even mount it upside down.The loudspeakers are delivered with a handy table stand for easy placement on a TV table, bookshelf, etc. The elegant and curved cabinet body is a combination of high gloss lacquered aluminium and composite material for the baffle. The surface of the baffle is treated with a rubbery coating for a smooth, elegant touch. The grille, which conceals and protects the drivers and the baffle, is held in place with magnets - allowing quick, easy removal with no visible signs of mounting pegs on the grille. Simple and stylish satellite speakers.FAZON SAT 5.1-3Awarded the highly acclaimed ‘Best Style Package for 2011’ by What HiFi, these compact DALI speakers will not let you down. An aesthetically pleasing set-up consisting of 5 identical speakers, assisted by the SUB E-12 F. The FAZON SAT pleases eyes and ears alike. WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]86 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]6Maximum SPL [dB]104Recommended Amplifier Power [W]20 - 120Crossover Frequency [Hz]1,800 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Shelf or stand Dimensions With Base (HxWxD) [mm]  287 x 146 x 172 (with table stand)Dimensions (HxWxD) [mm]255.5 x 138 x 87Weight [kg]2.4Accessories IncludedAssembly Tools Manual Table Stand Wall Bracket  

FAZON SAT is a two-way designed satellite loudspeaker including a 4½” mid/woofer with wood fibre cone and an oversized 28mm/1.1” soft dome tweeter with a powerful neodymium magnet system. The drivers share the same technology platform as the drivers developed for the acclaimed MENTOR and IKON series.  Equipped with a 360º pivoting wall bracket, FAZON SAT offers a flexible and innovative “Twist ‘n‘ Tilt” function. You can angle the speaker precisely horizontally and vertically; tilt it up or down, swivel it to either side and even mount it upside down.The loudspeakers are delivered with a handy table stand for easy placement on a TV table, bookshelf, etc. The elegant and curved cabinet body is a combination of high gloss lacquered aluminium and composite material for the baffle. The surface of the baffle is treated with a rubbery coating for a smooth, elegant touch. The grille, which conceals and protects the drivers and the baffle, is held in place with magnets - allowing quick, easy removal with no visible signs of mounting pegs on the grille. Simple and stylish satellite speakers.FAZON SAT 5.1-3Awarded the highly acclaimed ‘Best Style Package for 2011’ by What HiFi, these compact DALI speakers will not let you down. An aesthetically pleasing set-up consisting of 5 identical speakers, assisted by the SUB E-12 F. The FAZON SAT pleases eyes and ears alike. WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]86 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]6Maximum SPL [dB]104Recommended Amplifier Power [W]20 - 120Crossover Frequency [Hz]1,800 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Shelf or stand Dimensions With Base (HxWxD) [mm]  287 x 146 x 172 (with table stand)Dimensions (HxWxD) [mm]255.5 x 138 x 87Weight [kg]2.4Accessories IncludedAssembly Tools Manual Table Stand Wall Bracket  

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module.The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent. The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie. The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button Terminals. Easy to use push button terminals make connecting the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance. Paired with the FAZON SUB 1 you have the perfect solution for a small living room. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]196 x 113 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module.The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent. The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie. The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button Terminals. Easy to use push button terminals make connecting the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance. Paired with the FAZON SUB 1 you have the perfect solution for a small living room. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]196 x 113 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

By combining appealing Danish design, genuine materials and excellence in driver- and speaker development, you get a high performance satellite loudspeaker for on-wall mounting by choosing the FAZON LCR. The satellite speaker can be used both for stereo or multi channel setups - even as a center channel speaker.DALI FAZON LCR comes with a patent pending wall bracket, which makes connectivity and correct polarity very easy, no matter how the speaker is mounted. FAZON LCR is a versatile loudspeaker, which fits a modern lifestyle, where high performance and a compact form factor is in quest.Sound & Build QualityThe drivers in FAZON LCR have a lot of similarities with the drivers used in the multiple award winning DALI IKON and MENTOR speakers. The cabinet is made of die cast aluminum, which makes it possible to create an asymmetrical shape with internal bracings, which will suppress both acoustic and mechanical resonances in the cabinet structure.FAZON LCR 3.1In some rooms it can be difficult to accommodate surround speakers or to run the necessary cables. An obvious solution may be to go for a 3.1 system, for instance three FAZON LCR and the FAZON SUB 1. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.MAGNETIC GRILLESAll products of the FAZON series come with exclusive magnetic grilles enabling an easy click-on function. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]78 - 25,000Sensitivity (2,83 V/1 m) [dB]89.0Nominal Impedance [ohms]6Maximum SPL [dB]107Recommended Amplifier Power [W]15 - 120Crossover Frequency [Hz]3,000 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity2 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Dimensions With Base (HxWxD) [mm]  385 x 157 x 117Weight [kg]3.5Accessories IncludedInstallation Templates Manual Mounting Brackets Wall Bracket 

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms. The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series. The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8