Warm Audio

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Ασυγχώρητα VintageΤο Warm Audio Centavo είναι μια ακριβής αναδημιουργία ενός από τα πιο ανεπίτευκτα overdrive πετάλια στην ιστορία της κιθάρας. Φημισμένο για το χαρακτηριστικό του boost και τα παραμορφωμένα tones, ο χαμός για το πολύ δημοφιλές πετάλι συνεχίζεται μέχρι και σήμερα, πολύ μετά από την αρχική παραγωγή του από το 1994 μέχρι το 2009. Με τις τιμές να υψώνονται ασύγκριτα για ένα πετάλι με 3 περιστρεφόμενα, δεν είναι περίεργο που κιθαρίστες όπως , o Jeff Beck, Joe Perry, John Mayer και Josh Homme βρήκαν όλη την μυθική μαγεία των πρωτότυπων πεταλιών να αξίζουν την διασημότητα. Το Warm Audio Centavo είναι ένα πιστό στο πρωτότυπο overdrive πετάλι που αναδημιουργεί αυθεντικά την θρυλική εμπειρία και τις λατρεμένες χροιές του αρχικού, θρυλικού πεταλιού.Κληρονομιά στα πόδια σαςΕίτε κυνηγάτε τις παραμυθένιες boost χροιές, την edge-of-breakup παραμόρφωση, ή θέλετε να ωθήσετε το ρυθμικό κανάλι σε πραγματική τραχύτητα – το Centavo έχει όλες τις λατρεμένες χροιές του πρωτότυπου πεταλιού. Το Centavo λειτουργεί άνετα ως πετάλι boost, ενώ ο κορεσμός σε μεγαλύτερες ρυθμίσεις gain προσφέρει μία πλατφόρμα για αληθινά διαφανή και καθαρά παραμορφωμένα ρυθμικά tones. Η προσθήκη του “MOD” διακόπτη στο πίσω μέρος – κάτι που είχε ζητήσει ο Jeff Beck από τα αρχικά πετάλια – δίνει την δυνατότητα στους μουσικούς να επεκτείνουν την ανταπόκριση του μπάσου, επηρεάζοντας τις χαμηλότερες χορδές για επιπρόσθετες χαμηλές αρμονικές.Ρυθμιστικά Πεταλιού και ΈλεγχοςΤο Centavo έχει τρία βασικά ρυθμιστικά στο πάνω μέρος – Gain, Treble & Output. Το gain στο Centavo σπάει αρκετά προς το τέλος, με το edge of breakup να ξεκινάει μετά το 50% και πραγματικό clipping να επιτυγχάνετε αργά στο gain stage. To treble ρυθμιστικό είναι χρήσιμο για να δώσετε λίγα πρίμα σε πιο «λασπωμένες» κιθάρες, όπως μοντέλα με διπλό humbucker ή όργανα 100% από Μαόνι. Το Centavo είναι εξοπλισμένο με output και μπορεί εύκολα να δώσει μία καθαρή ώθηση ή να δημιουργήσει μια φυσική παραμόρφωση αν οι λυχνίες στον ενισχυτή ήδη έχουν ώθηση. Πατώντας το MOD διακόπτη από πίσω είναι ένα καλό εργαλείο να έχετε στην διάθεσή σας αν το overdrive αρχικά ακούγεται στενό στα χαμηλά.

The Perfect Partner For Low-Output Mics In Studio & On StageThe Warm Lifter is an inline active microphone preamp designed to provide powerful gain to low output dynamic and ribbon mics and comes with premium features for live & studio use. The sweet sounds of classic low-output mics that you’ve heard on countless records and live recordings have benefited from the sufficient power provided by high-quality, high-gain preamps, bringing out the full frequency spectrum of tone and sonic characteristics of the mic. Warm Lifter puts a high-impedance mic pre with pure analog gain, tone filtering, and balanced JFET input at your fingertips at an incredible size and price.Using a low power interface in-studio or dealing with extra long cable runs in a live setting can starve the mic of adequate amplification. Warm Lifter boasts 26dB of analog gain with true impedance matching, so any low output mic you plug in will be professionally powered for connecting to audio interfaces or mixers. Adding the Warm Lifter ensures you have extra headroom necessary to bring out the rich lower-midrange detail and presence that passive ribbons and many dynamic mics are known for, without adding digital gain artifacts or losing tone from aggressively long cable runs. Beyond gain, Warm Lifter also has a 100Hz high-pass filter and a 3kHz high-shelf boost to sculpt tones.26dB Of Clean Analog GainWarm Lifter’s signal path begins with a balanced, 2.4k Ohm (impedance) JFET input that delivers 26dB of pure, clean analog gain. Having 26dB on tap before hitting digital is incredibly helpful, as this should prevent any mixer or digital interface from having to go much beyond 40dB of onboard digital gain. As digital gain increases, the likelihood of artifacts and thinning of sound increases. The JFET input provides enough analog tone to keep the mic sounding “open” without adding any noise or too much color. The 2.4k Ohm impedance will deliver excellent frequency response for low-output mics that fall into typical impedance ranges.Critical Frequency FilteringWarm Lifter has a selectable 12dB high-pass filter and 2.5dB high-shelf boost. The 12dB high-pass filter’s corner frequency is located at 100 Hz, right in the middle of the true bass frequency range. Engaging the filter will cut all frequencies under 100 Hz, which will be perceived as removing “boominess” from the sound. The 2.5dB high-shelf boost corner frequency is located at 3 kHz, which lies squarely in the middle of the upper-midrange. This is a shelf-style boost, meaning, all frequencies above 3 kHz will be boosted at a more gentle 2.5dB in comparison to the high-pass filter. Since this is a shelf and will boost everything above 3k, the perceived change will add upper-mids, presence, as well as true high-end, otherwise known as “air” or “brilliance.” Engaging this boost will instantly add clarity to your sound.

The WA-19 faithfully recreates one of the most favored studio and live dynamic mics of the 1960s. Like the original adored by live and studio engineers, the WA-19 delivers a unique combination of dynamic mic functionality and studio-worthy condenser tones. With the critical noise rejection & reduced proximity effect of a dynamic, the WA-19 captures vibrant top-end for enhanced detail, surpassing many studio dynamic microphones.This sound has been leveraged by artists like The Beatles, Tame Impala, Slayer (Kerry King), and many more. With elite, upgraded build quality and premium components, the WA-19 revives all the tone of the original 60s-era dynamic mic.

Το WA-19 αναπαριστά πιστά ένα από τα πιο αγαπημένα δυναμικά μικρόφωνα στο στούντιο και στα live της δεκαετίας του 1960. Όπως και το πρωτότυπο που λατρεύτηκε από τους ηχολήπτες ζωντανών εμφανίσεων και στούντιο, το WA-19 προσφέρει έναν μοναδικό συνδυασμό λειτουργικότητας δυναμικού μικροφώνου και ήχων πυκνωτή στο στούντιο. Με την κρίσιμη απόρριψη θορύβου και το μειωμένο φαινόμενο εγγύτητας ενός δυναμικού, το WA-19 συλλαμβάνει ζωντανά πρίμα με βελτιωμένη λεπτομέρεια, ξεπερνώντας πολλά δυναμικά μικρόφωνα στούντιο. αυτός ο ήχος έχει αξιοποιηθεί από καλλιτέχνες όπως οι Beatles, οι Tame Impala, οι Slayer (Kerry King) και πολλοί άλλοι. Με κορυφαία, αναβαθμισμένη ποιότητα κατασκευής και κορυφαία εξαρτήματα, το WA-19 αναβιώνει όλο τον ήχο του αρχικού δυναμικού μικροφώνου της εποχής του '60.

Το WA-44 αναπαριστά πιστά το πιο εμβληματικό μικρόφωνο ribbon όλων των εποχών. Ακριβώς όπως τα θρυλικά RCA 44BX ribbons της δεκαετίας του 1930 που αγαπήθηκαν από τραγουδιστές, συγκροτήματα, ντράμερ, μπασίστες, παραγωγούς και πολλούς άλλους, το WA-44 αποδίδει ισχυρά μπάσα, πλούσια μεσαία και απαλά πρίμα. Το WA-44 υπερέχει σε δυνατές πηγές ήχου και αποδίδει το γνήσιο ζεστό και vintage ηχόχρωμα, που έκαναν το πρωτότυπο, το μικρόφωνο επιλογής για μερικούς από τους πιο θρυλικούς τραγουδιστές, όπως οι Elvis Presley, Ella Fitzgerald, Jeff Tweedy, Frank Sinatra, Johnny Cash και πολλοί άλλοι. Με κορυφαία ποιότητα κατασκευής και premium εξαρτήματα, το WA-44 αποτυπώνει πιστά την εμβληματική ηχητική εμπειρία στο κέντρο της ιστορίας της ηχογράφησης.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Η Επιστροφή ενός θρύλου !Το νέο Foxy Tone Box από την Warm Audio είναι μια άριστη επανακυκλοφορία ενός από τα πιο περιζήτητα και αγαπημένα fuzz πεντάλ όλων των εποχών - χρησιμοποιήθηκε στις αρχές της δεκαετίας του εβδομήντα από τους θρυλικούς κιθαρίστες Billy Gibbons και Peter Frampton, και σήμερα από τον Adrian Belew, Nine Inch Nails και Beck.Εξωτερικά είναι καλυμμένο με παχύ βελούδο, όπως και το vintage πετάλι, το Warm Audio Foxy Tone Box ζωντανεύει πιστά το vintage κύκλωμα και σας προσφέρει απίστευτο τone, και octaver με την εμφάνιση του πρωτότυπου χωρίς να χρειάζεται να πληρώσετε τρελές τιμές!Με προσοχή στην εμφάνιση και τη λεπτομέρεια.Τα εξαρτήματα που χρησιμοποιούνται στο συγκεκριμένο κύκλωμα πεντάλ είναι κρίσιμα για τον πως που ακούγεται και επιδρά στο παίξιμό σας!Κάθε Foxy Tone Box κατασκευάζεται στο χέρι χρησιμοποιώντας premium ηλεκτρονικά μέρη.Ψάξαμε πολύ για κάθε ένα από τα τρανζίστορ NOS ("New Old Stock") Fairchild που χρησιμοποιήθηκε στο πρωτότυπο - και στη συνέχεια τα συνδυάσαμε με διόδους γερμανίου, αντιστάσεις άνθρακα υψηλών watt και πυκνωτές φιλμ για να καταφέρουμε τον ήχο του vintage πεταλιού στο σήμερα.Είναι true-bypass και ακούγεται όπως κανένα άλλο στη γη!ΕμφάνισηΌπως και το πρωτότυπο, το Foxy Tone Box διαθέτει χειριστήρια για Volume, Sustain και Fuzz (από "Mellow" σε "Brite"), μαζί με ένα διακόπτη για να ενεργοποιήσει το Octaver.Aυτό το πεντάλ είναι ένα ιδανικό distortion που περικλείεται σε πορτοκαλί βελούδο!Για να ξεκινήσετε, κρατήστε απενεργοποιημένο το Octave και περιστρέψτε το Fuzz στην πλευρά "Mellow" για ζεστή παραμόρφωση.Στη συνέχεια, ενεργοποιήστε το εφέ Octave, στρέψτε το Fuzz στο "Brite" και αυξήστε το Sustain για extra Gain, υπερ-συμπιεσμένους tone που θα σας ξετρελάνει!Η ηλεκτρική κιθάρα σας είναι η προφανής επιλογή , αλλά δοκιμάστε το και σε συνθεσάιζερ, μπάσο ακουστικό / ηλεκτρικό και πολλά άλλα.Εάν μπορείτε να συνδέσετε ένα καλώδιο σε αυτό, το Foxy Tone Box μπορεί να προσθέσει χαρακτήρα που απλά δεν μπορείτε να πάρετε από πουθενά αλλού.Τεχνικές προδιαγραφέςΠιστή αναδημιουργία του πρωτότυπου κυκλώματος "foxy" με 100% αναλογική, πλήρως διακριτή διαδρομή σήματοςΕξαιρετικά εξαρτήματα που χρησιμοποιούνται σε ολόκληρο το κύκλωμα, συμπεριλαμβανομένων των τρανζίστορ NOS 2N3565 Fairchild που βρίσκονται στο αρχικό κύκλωμαΧρησιμοποιεί αντιστάσεις άνθρακα, δίοδοι γερμανίου 1N34A και premium πυκνωτές μεμβράνηςTrue Bypass λειτουργία.Επιχρυσωμένα τακάκια PCB Κουμπιά VOLUME, SUSTAIN και FUZZΔιακόπτης OCTAVE SUSTAIN για ενεργοποίηση του εφέ οκτάβαςΥποδοχές εισόδου (INST) και εξόδου (AMP) 1/4 "

Reviving An Avant-Garde Pedal For Music’s TrailblazersFrom light Lo-Fi modulation all the way to the piercing sound of infinity ring-modulation, the Warm Audio RingerBringer accurately recreates the ultimate all-analog ring modulation effect used for experimental tones. Like the original, loved by artists like Jeff Beck, Radiohead, Omar Rodríguez-López, Trent Reznor, and many more, RingerBringer delivers the original distinct set of controls, extensive in/out options, and rich sonic textures to inspire boundless sonic experimentation.Don’t Just Play, CreateThe ideal platform for the sonic tinkerer, RingerBringer inspires you to generate layered frequencies and harmonics, explore a wide range of sonic possibilities for guitar & beyond, and design your own sounds from the ground up. Extensive controls including LFO, MOD, Frequency & RATE open up sonic possibilities that range from subtle overdriven textures all the way to wobbling, warped leads soaked in texture and tone. RingerBringer is 100% analog and sports premium components including hand-selected op-amps and transistors. RingerBringer is no emulation or “patch”, instead it delivers true-to-spec performance of the boutique, analog original.For Original Artists Building Memorable SoundsDelivering tones ranging from nuanced drive to out-of-this world modulation, Ringerbringer helps develop a unique sonic signature for any instrument, on any track.Radical Guitar TonesCombine drive, rate, and frequency for out-of-this-world world guitar tones. Use an external EXP pedal to tame the madness by controlling the rate, amount, mix or frequency manually.A Sandbox For Synths & KeysSend any keyboard or synth through the WA-RB for added harmonic content and endless modulation. Try sending digital synths, keys, and pads from your interface through the WA-RB for added analog vibe and “fattened up” tone on otherwise dry digital signals.Modern, Modded BassAdd drive, wobble, and bite to analog string and digital synth bass. Experiment with low and high mix settings to go from light harmonic content all the way to dense sonic bass texture.

A Rich Rock & Roll HistoryFrom rolled-down wooly tweed tones all the way to riff-worthy growl and grit, the Warm Audio Warm Bender delivers the ultimate Tone Bender-style fuzz experience in one pedal. The Warm Audio Warm Bender features three dedicated, selectable circuits that accurately deliver two of the most iconic Germanium Tone Bender fuzz tones plus a bonus, modern silicon circuit. Many legendary guitar tracks by artists like Jimmy Page, Jeff Beck, Pete Townshend, and more were crafted using the two most popular versions of the iconic British Bender fuzz sound. The debate rages over which Bender fuzz tone is most legendary, but why choose one when you can have both on your board?Two Vintage Benders + A Silicon VersionWhy choose one classic Tone Bender when you can have three? Choose between the NOS 76 (1X OC76 & 1X SFT337 transistors) setting for the “early” Bender tones with cutting highs, clear presence and drive that cleans up beautifully. For legendary riff-worthy fuzz with added bass response, the NOS 75 (3X OC75 transistors) setting delivers that Mark II Professional-style Bender fuzz tone. To hear the Bender sound with a tighter low and top end response, smooth distortion-like tone, use the 3-transistor topology Silicon setting. The added SAG control starves the voltage to create that “dying battery” tone with added touch-sensitivity and compression. Warm Bender is made with 100% through-hole construction using NOS Germanium transistors and every pedal is hand inspected and tested at Warm Audio HQ in Austin Texas by real musicians and engineers with a passion for superior sound.Pedal Settings & ControlsThe Warm Bender pedal has the typical ATTACK (Gain/Fuzz) and LEVEL (Loudness) controls of a Tone Bender-style pedal. The SAG switch starves the voltage from 9V to 6V - perfect for that touch-sensitive compressed tone. The three settings on Warm Bender cover these basic tones:

Το WA-8000 είναι μια λεπτομερής επανέκδοση σε ένα πολύ ειδικό λαμπάτο μικρόφωνο που άνοιξε το δρόμο του σε αμέτρητες πλατινένιες ηχογραφήσεις, ξεκινώντας από τις αρχές της δεκαετίας του '90 και συνεχίζοντας έως σήμερα. Ο ήχος αυτού του μικροφώνου έχει προσφέρει επιτυχίες για καλλιτέχνες από τον Dr. Dre, τη Mariah Carey, τον Boyz II Men και τον Brian McKnight μέχρι τον Eminem, τη Rihanna, τον Drake και άλλους. Το πρωτότυπο ξεχώριζε, διαθέτοντας φυσικά και ανοιχτά πρίμα, εξαιρετικά καθαρά μεσαία και ικανότητα απόδοσης εξαιρετικής λεπτομέρειας στα φωνητικά, σε αντίθεση με τα περισσότερα μικρόφωνα στον πλανήτη. Το WA-8000 ανταποκρίνεται στο ύψος των περιστάσεων και προσφέρει όλο αυτό το κορυφαίο συχνοτικό εύρος σε μια τιμή που θα σας κάνει να χαμογελάσετε.

The WA-14 is a '414-style condenser microphone based on the early 1970's microphone used on countless hit records. The WA-14 utilizes a custom all-brass CK12-style capsule, CineMag USA transformer, and a fully discrete signal path. The WA-14 can be used on an array of sources, such as; punchy/warm intimate lead vocals, acoustic/electric guitars, bass, drums/percussion, strings/orchestral material, and many other sources. The WA-14 provides a realism and thickness that is true to the vintage microphone, but now at an affordable price.All-brass CapsuleThe WA-12-B-60V is an all-brass, edge-terminated capsule that captures all the smoothness, rich top end, and warm vintage sonics of the original CK12 capsule. The WA-12-B-60V uses a variant CEK-12 backplate as a basis, which overcomes manufacturing limitations of the original CK12 capsule. The o-ring and housing of the WA-12-B-60V are all made from brass (no teflon parts), and the diaphragm is 24k gold sputtered 6 micron, NOS PET film (mylar). The end result is a very consistent, reliable capsule which matches the frequency response and tonality of the classic 1970's classic capsule Included in delivery:2 Shockmounts2 Microphone clamps2 PU leather zip pouches1 Transport case1 Stereo mounting rail

Premium Name-Brand TubesOne of the key elements of the WA-1B’s sonic signature is analog warmth of the makeup gain. Using premium vacuum tubes, the WA-1B adds rich character after the compression stage to deliver a dynamically-One of the key elements of the WA-1B’s sonic signature is the analog warmth of the makeup gain. Using premium vacuum tubes, the WA-1B adds rich character after the compression stage to deliver a dynamically-balanced signal without sacrificing tone. signal without sacrificing tone.Custom Transformer From Lundahl SwedenWe paired the true-to-spec Scandinavian circuit design with two custom large-core transformers from Lundahl in Sweden. Transformer selection plays a critical role in the rich analog tone and signal transfer that help deliver smooth compression with more control.

A 70s LegendThe Warm Audio Mutation Phasor II is an accurate recreation of one of the most desirable,100% analog phaser circuits made famous in the experimental era of the 1970s. Mutation Phasor II has all of the vintage vibes of the original phaser pedal allowing you to add depth, wobble, swirl, or “instant funk” to guitar, keys, bass, or anything you can dream of. This electro-optical phase-shifting pedal is built with a true-to-spec recreation of the 70s circuit using premium components. True to the original pedal, Mutation Phasor II delivers all the rich depth and instant psychedelic tones, favored by innovative musicians and producers like Billy Corgan, Tom Bukovac, Robin Trower, and many more.Swirly, Psychedelic, Rich Analog Tone Adding the Mutation Phasor II to your rig is like adding a new instrument. Fine-tuning the depth of the modulation just right and timing the speed to sync perfectly with the tune takes you back to old-school gigging and recording. For those looking for a truly unique phaser experience, send the phase shifts into overdrive by dialing up the feedback, emphasizing the “wooshes” of the pedal. Altogether, the Mutation Phasor II is not just a pedal, but more of a tone-shaping experience.A true-to-original recreation of the 70s circuit, Mutation Phasor II is built with premium components including classic RC4558P op-amps, vintage-style diodes, carbon resistors, and film caps - Housed in an ultra-tough, vintage-vibe steel case.Pedal Settings & ControlsTo deliver an authentic, experimental experience, the Mutation Phasor II brings back all of the original controls. For ultra-rich swirly phase shifting, the “Depth” control allows you to vary the width of the sweep range - delivering deep modulation expected from a vintage all-analog pedal. Increasing the depth control adds width to the frequency range of the effect, impacting higher highs and lower lows. Easily change the speed (or rate) of the phase-shifting effect to create more or less “wobble” in your tone - from 1/10th sweeps per second (slowest) to 18 sweeps per second (fastest). Increasing the “Feedback” control adds electric feedback to the “wet” phase-shifting signal. Increasing the feedback control creates a more intense phase sound with a particular emphasis on the sweeps, especially noticeable at slower rate settings.

A Must-Have OD Tone Of The 2000s & Beyond The Warm Audio ODD Box V1 (“ODD” for short) is a hard-clipping, op-amp-based overdrive inspired by an iconic pedalboard staple known for having a “cranked amp” tone. Perfect for boosting, adding breakup, or adding high gain to cleans, the ODD has all the tonal versatility of its inspiration. Delivering all of the sounds of a cranked, saturated tube amp, the ODD features classic-inspired controls, including a UK/US Switch, to flip the personality of ODD from a “British” to an “American” tube amp. True to its inspiration, the ODD delivers the sound of massive, live electric guitar that attracted players like Billy Gibbons, Mark Hoppus, Eric Johnson, J Mascis, Paul Gilbert, and many more to that open tube amp sound.Cranked Tone On Any StageThe ODD brings the coveted “amp-in-a-box” tone to any stage or studio. With a high degree of touch sensitivity combined with powerful drive and tone controls - the ODD sounds like a full stack regardless of volume. The added versatility of the UK/US switch ensures that any guitar or amp will deliver a true cranked-amp tone in any setup.To accurately deliver this artist-favorite tone, the ODD is built with through-hole construction using premium components, including a TLO82CP Op-Amp, 2N7000 transistors, & hand-selected capacitors & resistors.Pedal Settings & ControlsThe ODD has three critical OD controls on the front with a special addition. Drive controls the amount of clipping, or “overdrive” tone. The tone control increases treble as you turn it clockwise. The Volume control acts like a master output, increasing volume as you turn it clockwise. The UK/US switch quickly changes the personality of the ODD. The UK setting distorts earlier, bumps the upper mids, and increases volume - giving this setting more of a cranked, "chimey" amplifier tone. The US setting has a little more clean headroom, allowing the ODD to act more like a boost at first, and better aligns with traditional tweed-based "edge of breakup" amplifier tones.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Ασυγχώρητα VintageΤο Warm Audio Centavo είναι μια ακριβής αναδημιουργία ενός από τα πιο ανεπίτευκτα overdrive πετάλια στην ιστορία της κιθάρας. Φημισμένο για το χαρακτηριστικό του boost και τα παραμορφωμένα tones, ο χαμός για το πολύ δημοφιλές πετάλι συνεχίζεται μέχρι και σήμερα, πολύ μετά από την αρχική παραγωγή του από το 1994 μέχρι το 2009. Με τις τιμές να υψώνονται ασύγκριτα για ένα πετάλι με 3 περιστρεφόμενα, δεν είναι περίεργο που κιθαρίστες όπως , o Jeff Beck, Joe Perry, John Mayer και Josh Homme βρήκαν όλη την μυθική μαγεία των πρωτότυπων πεταλιών να αξίζουν την διασημότητα. Το Warm Audio Centavo είναι ένα πιστό στο πρωτότυπο overdrive πετάλι που αναδημιουργεί αυθεντικά την θρυλική εμπειρία και τις λατρεμένες χροιές του αρχικού, θρυλικού πεταλιού.Κληρονομιά στα πόδια σαςΕίτε κυνηγάτε τις παραμυθένιες boost χροιές, την edge-of-breakup παραμόρφωση, ή θέλετε να ωθήσετε το ρυθμικό κανάλι σε πραγματική τραχύτητα – το Centavo έχει όλες τις λατρεμένες χροιές του πρωτότυπου πεταλιού. Το Centavo λειτουργεί άνετα ως πετάλι boost, ενώ ο κορεσμός σε μεγαλύτερες ρυθμίσεις gain προσφέρει μία πλατφόρμα για αληθινά διαφανή και καθαρά παραμορφωμένα ρυθμικά tones. Η προσθήκη του “MOD” διακόπτη στο πίσω μέρος – κάτι που είχε ζητήσει ο Jeff Beck από τα αρχικά πετάλια – δίνει την δυνατότητα στους μουσικούς να επεκτείνουν την ανταπόκριση του μπάσου, επηρεάζοντας τις χαμηλότερες χορδές για επιπρόσθετες χαμηλές αρμονικές.Ρυθμιστικά Πεταλιού και ΈλεγχοςΤο Centavo έχει τρία βασικά ρυθμιστικά στο πάνω μέρος – Gain, Treble & Output. Το gain στο Centavo σπάει αρκετά προς το τέλος, με το edge of breakup να ξεκινάει μετά το 50% και πραγματικό clipping να επιτυγχάνετε αργά στο gain stage. To treble ρυθμιστικό είναι χρήσιμο για να δώσετε λίγα πρίμα σε πιο «λασπωμένες» κιθάρες, όπως μοντέλα με διπλό humbucker ή όργανα 100% από Μαόνι. Το Centavo είναι εξοπλισμένο με output και μπορεί εύκολα να δώσει μία καθαρή ώθηση ή να δημιουργήσει μια φυσική παραμόρφωση αν οι λυχνίες στον ενισχυτή ήδη έχουν ώθηση. Πατώντας το MOD διακόπτη από πίσω είναι ένα καλό εργαλείο να έχετε στην διάθεσή σας αν το overdrive αρχικά ακούγεται στενό στα χαμηλά.

PedalboardΤο Warm Audio Warmdrive είναι μία αληθινή αναπαραγωγή ενός από τα πιο περιζήτητα «amp-in-a-box» πετάλια όλων των εποχών, αποδίδοντας χροιές ενός πραγματικά ανεπίτευκτου παραμορφωμένου ενισχυτή. Θρυλικοί κιθαρίστες αλλά και μοντέρνοι βιρτουόζοι όπως ο SRV, Eric Clapton, Robben Ford, John Mayer, Santana, και Cory Wong φημίζονται να έχουν χρησιμοποιήσει είτε τον πρωτότυπο ενισχυτή ή το πετάλι που εμπνεύστηκε από αυτό. Με ένα κατάλογο μουσικών όπως αυτό, δεν είναι περίεργο που τα αρχικά vintage πετάλια συζητούνται από τους πιο απαιτητικούς κυνηγούς tone κιθάρας. Μένοντας σταθερό και πιστό στην κληρονομιά, το Warmdrime αποδίδει όλες τις χροιές του πρωτότυπου πεταλιού και του ενισχυτή από τα οποία εμπνεύστηκε.Αληθής στον ήχο, Αληθής στην κληρονομιάΕίτε παίζετε καθαρά, είτε παχαίνετε την ρυθμική χροιά, ή «βρωμίζετε» το σόλο, το Warmdrive μπορεί να μεταμορφώσει τον ενισχυτή σας από μια καθαρή και ευγενική πλατφόρμα πεταλιού σε ένα fuzzy τέρας! Ενώ το Warmdrive έχει πολύ δυναμικό gain στο πάτημα, προσθέτοντας το πετάλι σε ήδη υπάρχουσα αλυσίδα δεν αλλάζει δραστικά τον ήχο σας. Όπως το πρωτότυπο, το Warmdrive έχει το μοναδικό Voice/Tone ρυθμιστικό για να αλλάζετε από απαλές χροιές που θυμίζουν εκείνον τον ειδικό overdriven ενισχυτή στο καλύτερό του σημείο, μέχρι και σε πλήρως-διατηρούμενη παραμόρφωση. Είναι σαν να έχετε τα καλύτερα των δύο κόσμων, από καθαρό σε βρόμικο!Ρυθμιστικά πεταλιού και ΈλεγχοςΟ voice/tone συνδυασμός ρυθμιστικών στο πετάλι δίνει στους καλλιτέχνες επιπλέον ευστροφία συγκριτικά με ένα κλασικό overdrive πετάλι, δίνοντας την δυνατότητα στον μουσικό να τροποποιήσει την συχνότητα και πριν (voice ρυθμιστικό) και μετά (tone ρυθμιστικό) τα στάδια clipping. Παίζοντας με τα περιστρεφόμενα μπορεί κανείς να δημιουργήσει δυναμικούς ήχους που θα ακούγονται σαν δύο ταυτόχρονα σήματα κιθάρας. Το Warmdrive μπορεί επίσης να οδηγήσει από ένα ήπιο overdrive, μέχρι και πλήρη παραμόρφωση κάνοντας το εύκολο κανείς να χαθεί σε ένα σόλο jam. Συνδυάστε αυτές τις ρυθμίσεις με critical εντάσεις και gain και το Warmdrive είναι μία σεβάσμια προσθήκη σε οποιοδήποτε live ή στούντιο σύστημα.

The WA-MPX is an authentic reproduction of the vintage tape machine tube preamp that started the birth of rock ‘n’ roll known for pure analog warmth, delivering an impressive 300v of raw power & 90dB of tube gain. During the golden era of tape recording, the original 351-style tube preamp became the kings of studio tech and signature sound in the signal chain of hit recordings for artists including Elvis Presley, Bing Crosby, Les Paul, Nat King Cole, and Roy Orbison and producers like Steve Albini- a timeless sound that continues to be pursued by elite audio engineers today. With premium components, true-to-original circuit design, and selectable tape saturation, the WA-MPX authentically reproduces all the analog tone of the original to bring vintage warmth & color to your sound.

Το WA-MPX είναι μία αυθεντική αναπαραγωγή του βίντατζ tape προ-ενισχυτή λυχνίας που ξεκίνησε την γέννηση του rock ‘n’ roll, φημισμένο για αγνή αναλογική ζεστασιά, αποδίδοντας εντυπωσιακά 300v ισχύος & 90dB tube gain. Κατά την διάρκεια της χρυσής εποχής ηχογράφησης σε μπομπινόφωνο, ο πρωτότυπος ενισχυτής λυχνίας σε στυλ 351 έγινε βασιλιάς της στούντιο τεχνολογίας και χαρακτηριστικός ήχος σε αλυσίδες σήματος πετυχημένων ηχογραφήσεων για καλλιτέχνες όπως Elvis Presley, Bing Crosby, Les Paul, Nat King Cole, Roy Orbison και παραγωγούς όπως Steve Albini – ένας διαχρονικός ήχος που συνεχίζουν να τον αναζητούν κορυφαίοι ηχολήπτες μέχρι και σήμερα. Με premium εξαρτήματα, πιστό στο πρωτότυπο σχεδιασμό κυκλώματος και ρυθμιζόμενο tape saturation, το WA-MPX αναπαράγει αυθεντικά όλη την αναλογική χροιά του αρχικού για να φέρει βίντατζ ζεστασιά και χρώμα στην μουσική σας.

Το WA-8000 είναι μια λεπτομερής επανέκδοση σε ένα πολύ ειδικό λαμπάτο μικρόφωνο που άνοιξε το δρόμο του σε αμέτρητες πλατινένιες ηχογραφήσεις, ξεκινώντας από τις αρχές της δεκαετίας του '90 και συνεχίζοντας έως σήμερα. Ο ήχος αυτού του μικροφώνου έχει προσφέρει επιτυχίες για καλλιτέχνες από τον Dr. Dre, τη Mariah Carey, τον Boyz II Men και τον Brian McKnight μέχρι τον Eminem, τη Rihanna, τον Drake και άλλους. Το πρωτότυπο ξεχώριζε, διαθέτοντας φυσικά και ανοιχτά πρίμα, εξαιρετικά καθαρά μεσαία και ικανότητα απόδοσης εξαιρετικής λεπτομέρειας στα φωνητικά, σε αντίθεση με τα περισσότερα μικρόφωνα στον πλανήτη. Το WA-8000 ανταποκρίνεται στο ύψος των περιστάσεων και προσφέρει όλο αυτό το κορυφαίο συχνοτικό εύρος σε μια τιμή που θα σας κάνει να χαμογελάσετε.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Ο νέος βραχίονας επαγγελματικής εκπομπής WA-MBA της Warm Audio προσθέτει την τελευταία πινελιά στη ρύθμιση μετάδοσης ή streaming ήχου, επιτρέποντάς σας να τοποθετήσετε σωστά το μικρόφωνό σας για απόλυτη ποιότητα ήχου. Με ένα κρυφό εσωτερικό σύστημα διαχείρισης καλωδίων και εύκολες αρθρώσεις έντασης, η επαγγελματική εμφάνιση και απόδοση που αναζητάτε δεν ήταν ποτέ πιο εύκολη.  Το απαραίτητο αξεσουάρ για podcast ,web radio και streaming εργασίες 

Το WA-47jr είναι μια έκδοση FET χωρίς μετασχηματιστή, του εξαιρετικά γνωστού και κλασικού μικροφώνου '47 το οποίο έχει χρησιμοποιηθεί σε αμέτρητες ηχογραφήσεις επιτυχημένων δίσκων τα τελευταία 50+ χρόνια. ΤΟ WA-47jr είναι πλήρως διακριτό, έχει 3 πολικά διαγράμματα και έχει σχεδιαστεί για διάφορες χρήσεις, όπως: για επαγγελματικά studio ηχογραφήσεων, home studio, για live συναυλίες και για ραδιοφωνικές εκπομπές. Έχει τέλεια εφαρμογή σε φωνές, ηλεκτρική/ακουστική κιθάρα και μπάσο, κρουστά, πιάνο, έγχορδα αλλά και πνευστά.Το WA-47jr χρησιμοποιεί μια προσαρμοσμένη κάψa τύπου k47, σχεδιασμένη με το ίδιο μοτίβο οπών και απόκριση συχνότητας όπως και το vintage σχέδιο ('47). Η έκδοση αυτής της κάψουλας (μοντέλο #WA-47-V-80v) είνα προσεκτικά κατασκευασμένη από έναν αυστραλό κατασκευαστή του οποίου η ακρίβεια και η επαναληψιμότητα μας επιτρέπει να πετύχουμε τα vintage στοιχεία που είναι απαραίτητα για τον ήχο και την ποιότητα του μικροφώνου, ώστε να δημιουργήσει τον χαρακτήρα και την υπογραφή του WA-47jr.Με χαμηλό θόρυβο low-noise, η διακριτή διαδρομή σήματος του WA-47jr, όταν συνδιάζεται με αυτή την εξαιρετική κάψουλα τύπου ΄47, επιτρέπει στο μικρόφωνο να αποκτήσει έναν πολύ παρόμοιο τόνο με το κλασικό '47, αλλά σε πολύ πιο προσιτή τιμή. Το WA-47jr χρησιμοποιεί την ίδια κάψουλα, του στυλ k47 που βρίσκεται και στο WA 47.Προδιαγραφές:- FET μετασχηματιστή, ΄47's τύπου- Κλώνο κάψουλας τύπου '47 (στυλ K47) - Μοντέλο #WA-47-B-80v- Make-up κάψουλα: Χρυσή κάψουλα, διπλό μεγάλο διάφραγμα, μονή οπίσθια πλάκα, 6 microns   NOS mylar (PET film)- Πλήρως διακριτή διαδρομή σήματοσ, πυκνωτές Toshiba FET, Wima, ηλεκτρολυτικοί πυκνωτές Panasonic- Πολικά διαγράμματα: Cardioid, Figure-of-eight, Omni- Hi-pass filter: 70Hz- Pad: -10 dB- Self-noise: 9 dBA- Δυναμική εμβέλεια: 138 dBA- Μέγιστο SPL: 147/157 dB (@ 1 kHz 1kOhms 0,5% THD, 0/-10dB)- Εύρος συχνοτήτων: 20Hz - 20 kHz- Ευαισθησία: 10mV /Pa ή -40 dB- Αντίσταση εξόδου: 100 ohm

Pro Series - 1 End Rgt-Angle Instrument Cable 20' (6.1 meters)

Pro Series - 1 End Rgt-Angle Instrument Cable 10' (3.0 meters)

Pro Series - Both Ends Rgt-Angle Instrument Cable 1' (0.3 meters)