MENU
Αναζήτηση
Filters
Ribbon mics have had a fairly high profile in the SE Electronics portfolio over the past few years, not least the Neve RN1R and then SE's two Voodoo models. Ribbons are prized for their ability to deliver a smooth high end, and thanks to modern design innovations, the slightly dull sound of some vintage ribbon models isn't a characteristic shared by their modern counterparts, although their warmth, smoothness and musicality remains. This musical tonality is particularly useful for taming the shrill excesses of guitar cabinets, drum overheads, wind and strings, especially solo bowed strings. There are also broadcast and voice-over applications for this type of mic.The SE X1R ribbon microphone is a passive ribbon design that comes in at a significantly lower price point than the passive Voodoo model. Its ribbon element sits in a neodymium-magnet motor assembly, and the mic incorporates some spin-offs from the Voodoo HF extension technology — although its high end doesn't extend quite as far as those particular models. SE call it a hybrid of old and new ribbon technology, which is probably a fair description.Outwardly, the mic looks very much like its capacitor counterpart, the side-address SE X1 cardioid model, and, like all SE microphones, there's a lot of 'by hand' work involved in its manufacture. The housing is all metal and very rugged, featuring an attractive, non-slip, textured black finish.Like all conventional ribbon mics, the SE X1R has a figure-of-eight polar pattern, which inherently dictates a significant proximity bass boost that may need some EQ compensation when the mic is used very close up. The two-micron-thick aluminium ribbon can handle SPLs up to 135dB, so this is no fragile flower, while the frequency response is within ±1dB from 20Hz to 16kHz. As you'd expect from a passive ribbon, the output is fairly low, with a sensitivity in this case of -55.3dB (±1dB, 1V/Pa), so you either need a decent mic preamp that can offer high gain and low noise or, alternatively, an active in-line gain booster, such as the Cloud Lifter from Cloud Microphones, to get the best performance.Note that passive ribbon mics don't need phantom power, but will tolerate it, providing the mic is plugged in using a conventional balanced cable before the phantom power is applied. Hot plugging or unplugging can stress the ribbon, however. Unpacking the mic reveals that although the outer packaging is a simple cardboard box, the interior contains a high-density foam block with cut-outs for the mic and the included stand clip. This foam block could be left in the box or used as an insert in your mic drawer for storage.Once in front of a sound source, this mic reveals its true colours, and right away I found that what it delivered was actually rather more useful than what I've got out of many other ribbon mics I've tried. The frequency range is not too dissimilar from what you'd expect from a moving-coil dynamic mic, so there's a reasonable amount of high end, but because of the 'uncomplicated' nature of the ribbon diaphragm, there's none of that nasal coloration that so many moving-coil mics impart to the sound.Electric guitar sounded great right away — I got pretty much what I was hearing in the room from the amp even before thinking about adding EQ. The top end had presence and projection but with no trace of added fizz, and lows came across as solid and full of authority, so I award it full marks in this role. On speech, the mic again performed somewhat like a well-mannered moving-coil model, but more open and natural-sounding. It certainly offers a useful alternative to either moving-coil or capacitor models in this application. Even on acoustic guitar, the general tonality came across pretty much as I heard the instrument from my playing position.A big advantage of ribbon mics is that, because of the smooth nature of their sound, you can use quite a lot of HF EQ boost to add more air, as worthwhile output is still produced as as high as 20kHz. While the level may drop away above 15kHz or so, there's still enough there to boost if needed.As I suspected, the output level of the mic was a touch on the low side, so I used my Cloud Lifter plugged into my usual audio interface, as the mic amps in my interface tend to pick up some computer noise when turned up near full. I could get away with plugging directly into the interface for recording a guitar amp, but ideally not for spoken word or acoustic guitar. With the Cloud Lifter in circuit, there was plenty of level and no noise problem, even when adding top-boost EQ.
Symbolized in eye-catching gorgeous Maple figures on body top and headstock, Pacifica212VFM is the exclusively developed variation model of Pacifica112V which has been highly evaluated along with Pacifica112J. This model offers the same fine features as Pacifica112V, such as Alnico Pickups and Coil Tap Function, while its beautiful flamed Maple gives unprecedented presence with its distinct look . This model also has Maple figures on its headstock with matching head finish. 3 see-thru colors are available to stand up the Maple figures with classy tone.
Symbolized in eye-catching gorgeous Maple figures on body top and headstock, Pacifica212VFM is the exclusively developed variation model of Pacifica112V which has been highly evaluated along with Pacifica112J. This model offers the same fine features as Pacifica112V, such as Alnico Pickups and Coil Tap Function, while its beautiful flamed Maple gives unprecedented presence with its distinct look . This model also has Maple figures on its headstock with matching head finish. 3 see-thru colors are available to stand up the Maple figures with classy tone.Specifications : BodyAlderTopMapleBack-FingerboardRosewoodFrets22NeckMapleNeck TypeBolt onBridge PickupAlnico V HumbuckerNeck PickupAlnico V Single CoilMiddle PickupAlnico V Single CoilTremolo Type - BridgeVintage TremoloScale25 1/2''HardwareChromeGig Bag - Hard Case-TunersDie castColorTrans Black
Different edition of a renowned model by Yamaha with two Alnico V Humbucker for great sound projection, power and huge guitar riffs at your disposal.PAC120H combines player-focused, stage ready spec with no-compromise construction and set-up to create the best value player’s guitar on the market today. BodyAlderTop-Back-FingerboardRosewoodFrets22NeckMapleNeck Type-Bridge PickupAlnico V HumbuckerNeck PickupAlnico V HumbuckerMiddle Pickup-Tremolo Type - BridgeVintage Tremolo with Block SaddleScale25 1/2''HardwareChrome PlatedGig Bag - Hard Case-TunersDie-CastColorVintage White
Different edition of a renowned model by Yamaha with two Alnico V Humbucker for great sound projection, power and huge guitar riffs at your disposal. PAC120H combines player-focused, stage ready spec with no-compromise construction and set-up to create the best value player’s guitar on the market today. BodyAlderTop-Back-FingerboardRosewoodFrets22NeckMapleNeck Type-Bridge PickupAlnico V HumbuckerNeck PickupAlnico V HumbuckerMiddle Pickup-Tremolo Type - BridgeVintage Tremolo with Block SaddleScale25 1/2''HardwareChrome PlatedGig Bag - Hard Case-TunersDie-CastColorYellow Natural Satin
Different edition of a renowned model by Yamaha with two Alnico V Humbucker for great sound projection, power and huge guitar riffs at your disposal. PAC120H combines player-focused, stage ready spec with no-compromise construction and set-up to create the best value player’s guitar on the market today. BodyAlderTop-Back-FingerboardRosewoodFrets22NeckMapleNeck Type-Bridge PickupAlnico V HumbuckerNeck PickupAlnico V HumbuckerMiddle Pickup-Tremolo Type - BridgeVintage Tremolo with Block SaddleScale25 1/2''HardwareChrome PlatedGig Bag - Hard Case-TunersDie-CastColorVintage White
Reduce reflections and minimize vibrationColor and finish matched to Era 300 for streamlined aestheticDiscreet low-profile design allows access to all ports and controlsBall-and-socket joint swivels 15 degrees up or down, left or right to angle the speaker2.5 in (63 mm) wall clearance accommodates Sonos Line-In Adapter or Combo Adapter
Featuring the industry standard BETA®58A vocal microphone, the new GLXD24+/B58 Dual Band Vocal System delivers superior, transparent digital audio. The perfect combination of the automatic frequency management with new Dual Band Technology provides reliable and consistent performance, while Shure proprietary Lithium-Ion rechargeable batteries provide up to 12 hours of use. Go wireless without complication.
Rega Nd5The Rega Nd5 phono cartridge is a moving magnet (MM) model with a bare elliptical diamond belonging to the Rega Nd series. The latter is characterized by the use of a N55 neodymium magnet, the most powerful on the market, usually reserved for moving coil (MC) cartridges. The Rega Nd5 hifi cartridge promises clear and detailed reproduction as well as a wide soundstage.The Rega Nd5 moving magnet cartridge guarantees clear reproduction and a wide soundstage ideal for rediscovering your favourite vinyl records.3-point fixingThe Rega Nd5 phono cartridge replaces the Rega Elys 2 model. Like the latter, it is designed to preserve the integrity of the musical signal by eliminating losses due to vibrations and resonances. Its internal design and its three-point fixing system, specific to the British manufacturer, ensure a perfect connection with the tonearm. The cartridge-tonearm couple is now one, the mechanical vibrations outside the signal are evacuated from the cartridge to the tonearm and then from the tonearm to the turntable, producing a resonance path which moves away from the record and preserves all the reading acuity of the cartridge.The Rega Nd5 phono cartridge uses the 3-point fixing standard used by the British manufacturer in order to benefit from perfect stability and an optimal connection with the tonearm.Bare elliptical diamondThe Rega Nd5 phono cartridge is equipped with a bare elliptical diamond, which justifies the upgrade compared to the Nd3 model with an elliptical diamond. The bare elliptical diamond benefits from a stylus cut from a single piece. Thus, its lower mass offers better precision in tracking the groove. The sound is richer and more detailed, transients are better respected. This diamond is mounted on an aluminum cantilever. A light and rigid material that ensures perfect tracking of the grooves in order to extract every detail.Wide and detailed soundstageThe Rega Nd5 cartridge shines with its musical reproduction. The soundstage is wide and precise. Indeed, this phono cartridge benefits from an optimized space between the poles. Thus, the Rega Nd5 guarantees excellent linearity and superior crosstalk characteristics, which allows to obtain a very wide soundstage. Another new feature is the miniaturized parallel winding using a 38 micron wire with only 1275 turns which optimizes the inductance and impedance in order to maximize the response in the high frequencies.
Ανταλακτική βελόνα για την κεφαλή της ortofon DJ s
Simply Analog χάρτινες αντιστατικές εσωτερικές θήκες προστασίας δίσκων 12" σε μαύρο χρώμα. Οι θήκες είναι από παχύ χαρτί βαρέως τύπου με δύο κεντρικές οπές που αφήνουν ορατή την ετικέτα του δίσκου.Οι θήκες είναι διαθέσιμες σε πακέτο των 25 τεμαχίων.
Simply Analog διάφανες εξωτερικές θήκες Gatefold από PVC, που καλύπτουν δίσκους Double LP μαζί με τη συσκευασία τους. Συσκευασία 10 τεμαχιών.
Magma Solid Blaze Pack 800 DJ Backpack is made with high-quality water-repellent materials and double zippers to protect your laptop, timecode discs and other expensive equipment. The interior layout features multiple compartments, zippered pockets for organization and quick access. Travel comfortably knowing your gear is safe inside the DJ bag Solid Blaze Pack 800. External dimensions:
The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.
The MK-012 is a compact, high quality capacitor microphone with interchangeable capsules to provide a choice of cardioid, hypercardioid or omni-directional polar patterns. The wide, flat response ensures that all sounds are captured with a high degree of accuracy.A -10 dB pad is included for use in high SPL environments, a low-cut pad is optionally available. The capsules, which screw onto the microphone body, utilise a precision, integral connection system to ensure reliable electrical contact.The MK-012 is suitable for use in any situation where an accurate sound is required, the small size of the system makes it ideal for use in broadcast, sound for picture, installation, sound reinforcement and theatre situations as well as the recording studio.In pairs, the MK-012s are perfectly suited for coincident and spaced stereo miking techniques, and also overhead useage in live and studio situations.Specifications:Mic type: Small diaphragm condenserPolar Pattern: Cardioid, Hypercardioid, OmnidirectionalFreq. Response: 20-20000HzPhantom voltage required: 48 +- 2VFull impedance, module: less than 300 ohmsWeighted SPL (ref. DIN 45412): 18 dBAMaximum SPL in 250-8000Hz range, (less than 0.5% THD): 130 dbFree field sensitivity at 1KHz:
Very small size and super light-weight flexible miniature microphone. 5 mm permanently polarized condenser capsule. Omni-directional polar pattern. Double vent protection system for use in theatre and spoken word applications. Comfortable and secure fit with fixed bi-aural headband. Anti-pop screen Fitted with 3.5 mm jack. TECHNICAL SPECIFICATIONS : Transducer type: Back-electret condenser Polar pattern: Omni-directional Frequency response: 20Hz - 20KHz Sensitivity: -45dB± 3dB Max Input SPL: 130 db S/N Ratio: >70dB Nominal Impedance: 1500 ohm ± 30% Power Supply: 1.5V-10V Colour: Skin Dimension: O 5mm Accessories: Windscreen Connector: 3.5mm mini-jack Weight: 25 gr
With a 10” Celestion Ten-30 speaker, perfectly chosen for great sound at low levels, this 5w amp provides you with the chance to experiment in your own home or at rehearsals. The variety of features mean that it can be used for multiple genres, anything from blues rock to heavy metal.Features:You can reduce power to 0.5w and use the emulated output making this amp is ideal for those quieter moments.Using the footswitchable gain channels the DSL delivers anything from clean, classic tones to heavy distortion with extra bite.The studio quality reverb, tone shift, deep and FX loop features allows for you to add depth and shaping to your sound.Specifications:Reissue series - authentic DSL soundPower: Low power circuit from 5 W to 1 W2 footswitchable channels with classic gain and ultra gainEquipment: 10" Celestion Ten-30 loudspeakerPreamp tubes: 3 x ECC83Power tube: 1 x 12BH7 / ECC99Tone Shift key for center configurationBass switch that complements a resonant bass boostIndependent volume and gain controls for both channelsCommon sound control for treble, mid and bassEmulated line outputSerial FX loopIncludes footswitch
There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 700W 2Ω, 500W 4Ω, 275W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A
Stereo compressor/gate with integrated PSU, Over Easy function (automatic attack and release), Compressor-Ratio "1:1 - 4:1", XLR ins/outs, -10/+4dB switchable, stereo link, 19", 1U
Hands-free performance. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions.The XS WIRELESS 2 HEADMIC SET is an easy to use all-in-one wireless system for singers and performers, excellent for live sound that involves dancing and singing all at the same time. Metal receiver housing and rackmount kit included.Features:Lightweight headmic for hands-free operation and compact bodypack transmitterTrue diversity receiver with metal housingExternal antennasAutomatic frequency management and synchronization via remote channel for easy setupFully tunable over a wide range of UHF frequenciesRackmount kit includedUp to 12 compatible channelsWhat's in the box?1 receiver EM-XSW 21 bodypack transmitter SK-XSW1 headset microphone ME 3-II1 power supply NT 12-5 CW2 AA batteries1 rackmount kit1 pouchuser manual
Musical Fidelity is proud to unveil the X-Tube – a revolutionary pure Class A triode tube output buffer built with our newly reimagined X-profile aluminum die-cast chassis. The X-Tube is the first out of a series of new X-line products.How to use the X-Tube?The X-Tube is quite literally the Missing Link between your sources and amplifier. It is connected between source and amplifier.Why does the X-Tube matter?Modern source devices like streamers or A/V receivers focus mainly on software and struggle with development costs. What is the sacrifice? Hardware! Their cheap output stages struggle to properly drive an amplifier’s input stage.What benefits does it bring?Tube Buffer: between source and amplifierDramatically improves any digital and analogue sourceAdds tube like tonal characters, depth and richness to every digital and line sourceIdeal impedance characteristicsEasy to drive for any output stage, incl. cheaper stages in modern digital streamersImpedance Matching Amplifier: between preamp or home theatre A/V receiver and power ampMaximise signal transferReduces distortion due to wrong impedance matchingProtects your amplifier from reactive loadsHome theatre: enhance front L/R stereo channels for high-fidelity stereo music listening
No model in REL’s long history has sold more units nor engendered more affection than our T/5. Here reimagined in a modern, elegant, new form factor, T/5x’s mission remains the same: make remarkable bass far beyond its modest size, do so in a way that complements every interior’s style, and eliminate all visual distraction. Mission Accomplished.Designed for Elegance- Stunningly Simple Perfect for small and medium rooms, T/5x seats perfectly into any décor. Floor-firing is part of its secret; bass energy strikes the floor and spreads uniformly throughout the space making it perform like a larger model. For those picky about style, the hidden bonus is this design eliminates even the grill, rendering it the purest of forms. Slightly larger in volume than its predecessor, it actually appears to be smaller due subtle design changes to minimize it’s visual presence. Finally, 5 hand polished coats of lacquer in your choice of High Gloss White or Piano Black add luster to the softly rounded cabinetry. Many don’t realize the intense linkage between performance and design here at REL. Performance is everything to us and so it drives physical design revisions. Our engineers, recognizing the need for greater acoustic volume to achieve the goals of greater fluidity and power, turn to the designer who works dimensions to fool the eye into seeing a smaller, more compact footprint even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and familiar with no unnecessary adornment.T/5x borrows a single longthrow 8” (200mm) bass engine from its elder sibling, T/7x. Developed using a composite of aluminum and light paper, this cone captures details that will amaze, while supplying sufficient energy to plumb deeper than one would expect for its size. In T/5x, its throw–the ability to play louder–has been increased. Internally, the suspension received numerous upgrades akin to transforming the handling of a car from a family sedan to a true sports car. More power, greater finesse.T/5x builds on its predecessor’s reliable, expensive 125 W Class A/B amplifiers. Internally, key items significant to upgrading transparency and speed have been upgraded at no cost to REL’s legendary reliability. Separate inputs for High Level Inputs, Low Level Input (necessary for the increasing number of powered active speakers emerging on the market) allow for a natural, perfect transition from speaker to subwoofer. And in theater a separate, dedicated .1/LFE Input for Theatre performance permits automatic transition between music in high end 2-channel applications and home theater without needing to change a single setting. Magic? No, superior engineering. Standby Mode switch is only included on 220V units.
Universal music-making controllerFind your own flow and enjoy making music with a plug-and-play MIDI keyboard that does it all. MiniLab 3 gives you easy controls, great-feeling keys, and a fully-integrated all-in-one software package that’s ready to get creative right out the box.Go with your flowFinally, an easy keyboard controller that adapts to your needs, your style, and your workflow, so you can make music just the way you like it. Hook it up, discover fresh sounds, enjoy premium velocity-sensitive keys, and get hands-on with your music like never before.Every sound you need includedWhat software & sounds do you get with MiniLab 3? From recording software to a library of over 4 million samples, you’re totally kitted out for whatever music you want to make.
Αναβαθμίστε τον ήχο σας Είστε δυσαρεστημένοι με την ποιότητα ήχου των ενσωματωμένων ηχείων του υπολογιστή σας; Θέλετε να αποκτήσετε μια καλύτερη εμπειρία ακρόασης για την αγαπημένη σας μουσική, podcast, ζωντανές ροές, βιντεοπαιχνίδια, βιντεοκλήσεις και συνέδρια; Τα ηχεία M-Audio BX4 είναι η τέλεια επιλογή! Μικρά, ελκυστικά και απλά στην εγκατάσταση, τα επιτραπέζια ηχεία BX4 της M-Audio έχουν δημιουργηθεί σχολαστικά για εσάς για μια εμπειρία πολυμέσων όπως ποτέ άλλοτε! Εντυπωσιακή εμπειρία ακρόασης Σχεδιασμένα για live streaming, podcasting, παιχνίδια, παρακολούθηση ταινιών ή ακρόαση της αγαπημένης σας μουσικής, τα μόνιτορ BX4 της M-Audio παρέχουν και εντυπωσιάζουν με 120 Watt κρυστάλλινου ήχου μέσα από ένα ελκυστικό σχεδιασμό. Ο αμφίδρομος σχεδιασμός διαθέτει ένα ακουστικά αδρανές κουτί MDF με bass reflex που διευκολύνει για ομαλά χαμηλά άκρα και "punch" μέσω των drivers χαμηλής συχνότητας Black Kevlar®. Επιπλέον, οι βελτιωμένες πίσω θύρες προσθέτουν εκτεταμένη απόκριση χαμηλών συχνοτήτων, καθιστώντας κάθε βιντεοπαιχνίδι, ταινία ή τραγούδι που παίζετε μια πραγματικά καθηλωτική εμπειρία. Προσθέστε σε αυτό, τα τουίτερ από φυσικό μεταξωτό θόλο βελτιστοποιημένο για υπολογιστές για μια κρυστάλλινη στερεοφωνική εικόνα υψηλής ακρίβειας και το BX4 προσφέρει καθαρή ποιότητα ήχου ιδανική για οποιαδήποτε εφαρμογή πολυμέσων Τέλειες συνδέσεις Οι πίσω συνδέσεις πάνελ προσφέρουν εισόδους 1⁄4 ιντσών, 1⁄8 ιντσών και RCA, καθιστώντας τις συμβατές με όλο τον εξοπλισμό σας. Υπάρχει ακόμη και είσοδος aux 1 ⁄ 8 ίντσας και σύνδεση ακουστικών στο μπροστινό μέρος του ηχείου για το tablet, τον υπολογιστή ή την κινητή συσκευή σας. Ειδικός ήχος Το BX4 σας προσφέρει την απόλυτη προσαρμοσμένη εμπειρία ακρόασης. Με τα χειριστήρια High-EQ και Low-EQ επιλέγετε τον τέλειο ήχο για το περιβάλλον σας. Ο διακόπτης θέσης ενεργού ηχείου αριστερά / δεξιά σάς επιτρέπει ακόμη και να επιλέξετε ποιο ηχείο είναι η αριστερή ή δεξιά πλευρά - ιδιαίτερα χρήσιμο εάν είστε αριστερόχειρες και θέλετε το ηχείο με τον έλεγχο έντασης του μπροστινού πίνακα στην αριστερή σας πλευρά. Περιλαμβάνεται το Pro Tools | First M-Audio Edition Το ProTools είναι το στάνταρτ στην βιομηχανία του λογισμικού ηχογράφησης. Αυτό το φανταστικό λογισμικό ηχογράφησης Audio και Midi βοηθά στην έμπνευση οποιονδήποτε μουσικό, podcaster, live streamer ή τραγουδιστή για να δημιουργήσει, να ηχογραφήσει και να μοιραστεί όλες τις ιδέες του με όλο τον κόσμο ανά πάσα στιγμή. To Pro Tools | First M-Audio Edition διαθέτει απεριόριστα Busses, Elastic Time και Elastic Pitch, Offline Bounce και 1 GB δωρεάν αποθηκευτικού χώρου cloud για συνεργασία ή πρόσβαση στα έργα σας από οποιονδήποτε υπολογιστή οπουδήποτε και να είναι συνδεδεμένος στο Διαδίκτυο, καθώς και συμβατότητα με όλη τα συμπεριλαμβανόμενα AIR Music Tech Virtual Instruments.Αυτό το πραγματικά καταπληκτικό πακέτο λογισμικού εγγραφής είναι έτοιμο να βγάλει τις ιδέες σας από τη φαντασία σας και να απλωθεί στον κόσμο.
Closed-Back Dynamic Design with Clean Sound, Rich Bass Response and Crisp HighsThe sensitivity and frequency response of the TH-11 deliver clear balanced sound to fit all of your favorite tunes, regardless of genre or application. These high-powered headphones produce pristine highs, clear mid-range, and rich low end where most other headphones leave you yearning for more.TASCAM understands that just as important as the sound of ones headphones is a clean modern design and comfort.Foldable Design for Easy Transport and DJ PlayFeaturing plush cushioned ear cuffs and a padded headband; TH-11 can be put to work for hours of comfortable use. Both left and right ear-cuffs offer full 90˚ rotation making TH-11 flexible to wear when listening to your favorite albums, tracking for hours or performing all night. Not to mention, you're going to look good wearing them. The folding design of the TH-11 allows them to compactly fit wherever they need to go.TASCAM's TH-11 headphones can easily be a part of your everyday accessories but also fit into your recording or performing workflow. Don't just hear with any pair of headphones; truly listen to the details of your music and media while enjoying comfort and flexibility. With the TH-11 headphone, TASCAM (as always) has delivered first-class quality, style and design at a price everyone can appreciate. Pick one up today and find out for yourself.
The PodMic is a broadcast-quality dynamic microphone optimised for incredible performance in podcasting, livestreaming, and other speech or vocal applications. Offering a rich, full-bodied sound, with an internal pop filter for minimising plosives, internal shockmount for reducing vibrations, and a swing mount for easy positioning, the PodMic will take your content to the next level.Key FeaturesBroadcast-quality dynamic microphoneRich, detailed sound optimised for podcasting, livestreaming and other speech applicationsInternal pop filter, shock mount and integrated swing mountRobust all-metal construction
Βάση μικροφώνου σε μαύρο χρώμα με αρθρωτό βραχίονα για στήριξη σε επίπεδη επιφάνεια. Μέγιστο μήκος 820mm καιμέγιστο ύψος 840mm. Μπορεί να στηριχτεί σε επιφάνειες με μέγιστο πάχος 55mm ή 70mm (ανάλογα με τη βάση που θα επιλέξουμε) και υποστηρίζςει μικρόφωνα με βάρος από 700gr μέχρι και 1.1kg. Η αντικαδασμική βάση δεν συμπεριλαμβάνεται στην τιμή αλλά πρέπει να συνυπολογιστεί στον υπολογισμό του συνολικού βάρους.
Wilson Raptor Vocal, center speaker suitable for home cinema systems, recommended for amps 25-125 Watts at 4-8 Ohm, max SPL 108dB, 88dB sensitivity and 50 - 20.000Hz frequency response.The crossover developed for this design has been integrated to ensure that all the elements in this design are consistent in sound. It includes two lowmidrange drivers 4/" each, and a 1/" tweeter with a fabric dome. High quality enclosure with front firing double Bass Reflex ports allows the speaker to achieve much higher efficiency in the low frequency range.
QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD. High-efficiency 1500 W Class D power amplifier delivers up to 134 dB peak SPL on the EKX-15P via high-sensitivity transducers designed and engineered by EV. Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions. EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage. Lightweight, compact 15-mm wood enclosure with internal bracing, durable EVCoat finish, eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles.Specifications:Maximum SPL: 134 dB Maximum SPL is measured at 1 m using broadband pink noise at maximum outputPower Rating: 1500 W Frequency Response (-10 dB): 48 Hz - 20 kHz Hz Full space measurement using the music DSP presetCrossover Frequency: 1.7 k HzGrill: 18 AWG steel with powdercoat Weight Net: 24.4 kg (53.79 lbs)
Advanced, Innovative DAW Control Don’t kill that mouse—give it a companion. Although a keyboard and mouse are tried-and-true DAW-control devices, they’re far more effective when used in tandem with the FaderPort™’s precise tactile control over mix and automation functions.A superior solution for anyone who mixes in the box, the FaderPort provides a 100 mm touch-sensitive,motorized fader for writing fades and automation in real-time and 24 buttons covering 40 different functions, all in a compact chassis that easily sits on any desk. Quickly zoom in on audio files for editing. Control track levels with the touch of a finger. With the FaderPort, you’ll enjoy the fastest, most efficient workflow you’ve ever experienced. Work smarter. We've incorporated elements from the award-winning FaderPort 8 into our new and improved FaderPort. Rather than forcing you to revise your mixing method, the FaderPort augments the way you currently mix. You still use your faithful keyboard and mouse for things they do well, and the FaderPort handles what you really want to get your fingers on: your mix. This is DAW control the way you always hoped it could be! One-button access to key functions.* The FaderPort's unique Session Navigator provides easy access to eight mission-critical functions for maximum flexibility. Use the large encoder button and companion buttons to edit and mix with greater efficiency and speed. Scroll through your timeline, using the encoder, or work measure by measure with the arrow buttons; zoom in and out on the timeline with the encoder and make your tracks larger or smaller with the arrow buttons; navigate and drop markers; and maintain constant control of your main level. Once you start using the Session Navigator, you’ll wonder how you mixed without it. Universal compatibility and tight Studio One integration. FaderPort’s streamlined workflow and support for the Mackie Control and HUI protocols make it fast and easy to control Logic Pro X, Cubase, Ableton Live, Pro Tools, and more. No driver installation is necessary; just plug the control surface into a USB port and take command of your mix. But the FaderPort is downright magical when used with PreSonus Studio One. (Studio One Artist is included.) You’ll be amazed at how much faster you can work. An amazingly fast, efficient studio workflow awaits you! With the compact, easy-to-use FaderPort, you’ll enjoy the fastest, most efficient workflow and the most session control you’ve ever experienced. But don’t just take our word for it; visit your favorite PreSonus dealer and try the FaderPort for yourself! Features : Single touch-sensitive, 100 mm long-throw, motorized fader Large, 360° button encoder Complete recording-transport controls: Play, Stop, Fast Forward, Rewind, Record, Loop Drop Marker, Next/Prev Marker, Next/Prev Event General session controls: Undo/Redo, Arm All, Solo/Mute Clear, Click On/Off Session Navigator provides quick control over Track Scrolling, Timeline Scrolling, and much more Channel Controls: Level, Pan, Solo, Mute, Rec Arm Automation Controls: Touch, Latch, Trim, Write, Read, Off Mac / Windows compatible with native Studio One support and HUI and Mackie Control Universal emulation Footswitch input for hands-free start/stop (footswitch not included) USB 2.0 connectivity Touch-sensitive 100 mm motor fader (10-bit resolution, 1024 steps) Transport buttons with Start / Pause, Record, Stop, Forwards, Rewind, RTZ and Loop Function keys, such as Bypass, Mute, Solo, Automation Touch / Write / Read 360 Degree rotary controller Buttons for channel, panorama, scroll, click, marker, zoom Seamless integration with Studio One Footswitch connector System requirements: Windows 7 x64 / x86 SP1 or higher, macOS 10.8.5 64-bit or higher, Studio One Support and HUI / Mackie Control Universal Emulation Dimensions (W x H x D): 230 x 45 x 140 mm Weight: 0.68 kg Includes external power supply 12 VDC, 1.2A Includes full version Studio One Artist (Download)
Four Track Digital Audio Recorder and USB Audio Interface Versatile four-track audio recorder for cinema, music, podcasting and any other application. Easy-to-use compact design with a high-performance feature set and versatile audio I/O, all to produce professional content. Specifications : Recording Media SD card (64MB to 2GB), SDHC card (4GB to 32GB), SDXC card (up to 128GB) File System FAT16/32, exFAT Recording File Format WAV / BWF Sampling Frequency 44.1k / 48k / 96k Hz Bit-depth 16 / 24-bit MP3 Sampling Frequency 44.1k / 48k Hz Recording Bit-rate 32k / 64k / 96k / 128k / 192k / 256k / 320k bps Playback Bit-rate 32k to 320k bps, VBR, ID3TAG Ver. 2.4 Number of Channels 4-channel (2 Stereo) Playback speed control 0.5 to 2.0 times (in 0.1 increments) * 44.1k/48kHz only Built-in Microphone Unidirectional, Stereo (switchable between A-B and X-Y positions) EXT MIC/LINE IN Connector XLR/TRS Combo jack (1: GND, 2: HOT, 3: COLD) Nominal Input Level -19dBV (MIC) / +4dBu (LINE) Maximum Input Level -3dBV (MIC) / +20dBu (LINE) Input Impedance 2.2kΩ (MIC) / 10kΩ (LINE) PHONES/LINE OUT Connector 1/8" (3.5mm) Stereo Mini jack (Unbalanced) for LINE connection Nominal Output Level -14dBV (10kΩ load) Maximum Output Level +2dBV (10kΩ load) Output Impedance 12Ω for Headphones connection Maximum Output Power 20mW + 20mW (32Ω load) USB Connector USB Micro B-type Format USB2.0 HIGH SPEED Built-in Speaker 0.3W, Mono Low-cut Filter 40 / 80 / 120Hz Chromatic Tuner C1 to B6, A4 = 435Hz to 445Hz (in 1Hz increments) Effector 6 presets (Hall 1, Hall 2, Room, Studio, Plate 1, Plate 2) Tripod attachment screw-hole 1/4" Tripod attachment screw-hole Power 3 AA Batteries, USB bus power, AC 100 to 240V (optional AC Adapter) Power Consumption 2.5 W (Max) Battery Operation Time(Recording) Alkaline (EVOLTA) approx. 18 hours (2ch WAV, 44.1kHz, 16-bit, using Built-in Microphone, JEITA) Ni-MH (eneloop) approx. 16 hours (2ch WAV, 44.1kHz, 16-bit, using Built-in Microphone, JEITA) Dimensions (W×H×D) 2.75" × 6.1" × 1.37" / 70 × 155 × 35 mm Weight 8.3 oz. / 213 g Audio Performance Frequency Response Fs 44.1kHz 20Hz to 20kHz, +1/-3dB (EXT IN to LINE OUT, JEITA) Fs 48kHz 20Hz to 22kHz, +1/-3dB (EXT IN to LINE OUT, JEITA) Fs 96kHz 20Hz to 40kHz, +1/-3dB (EXT IN to LINE OUT, JEITA) Total Harmonic Distortion 0.05% or less (Fs 44.1k/48k/96kHz, EXT IN to LINE OUT, JEITA) Signal-to-Noise Ratio 92 dB or higher (Fs 44.1k/48k/96kHz, EXT IN to LINE OUT, JEITA) Computer Requirements Windows Computer Windows PC with USB2.0 or USB3.0 port CPU Dual Core, 2GHz or faster (x86) Memory 2GB or more Macintosh CPU Power PC, iMac, G3, G4, G5 266MHz or faster Memory 64MB or more USB USB2.0 recommended
Cable line mini jack stereo - 2 XLR male 3 meters.
Light, rugged head-worn mic for presenters with mini XLR connector for use with B 29 L battery operated power supply, MPA V L external phantom power adapter, or AKG WMS bodypack transmitters.
JBL JRX 225. Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.Attractive 18-gauge hexagon perforated, steel grille protects components from damage. The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region. - High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. Progressive Transition? high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. - SonicGuard? protects the highfrequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used.Specifications:Power Rating500 / 2,000 WFrequency RangeAt -10 dB : 36 Hz to 19 kHzFrequency ResponseAt ±3 dB : 45 Hz to 16 kHzSensitivity100 dB SPL (1 W / 1 m) (1m)Nominal Impedance4 ΩAmplifier Power500 to 1000 W into 4 ΩMaximum SPL133 dBNominalDispersion: 90 x 50ºCrossover Frequency2 kHzHigh Frequency DriverJBL 2414H-C 1" (25 mm) polymer diaphragm compression driver mounted on Progressive Transition WaveguideLow Frequency Driver2 x JBL M128Input Connectors1 x Neutrik Speakon NL-4; 0.25" (6.35 mm)1 x TS phone jack; parallelDimensions (H x W x D)43.0 x 18.3 x 16.8" (1,092.0 x 464.0 x 426.0 mm)Weight94 lb (42.6 kg)
The EVOLVE 50 Portable Column System is a three component loudspeaker system powered by a 1000 W Class-D amplifier and driven by Electro-Voice's QuickSmartDSP. The system consists of a 15 mm wooden, ported, powered subwoofer enclosure that houses a 12” subwoofer capable of a functional frequency output down to 37 Hz.The bi-directional aluminum pole’s connection to the subwoofer is secured using a magnet, and the column array is gravity-held to the sub pole. The signal is internally routed to the components.Eight 3.5" neodymium drivers in the column array coupled with the 12" subwoofer delivers up to 127 dB SPL. The eight composite waveguides control high frequencies with 120° of horizontal coverage, and 40° of asymmetrical (down-facing) vertical coverage to ensure suitable output for sitting and standing audiences. The sub pole and column array come prepackaged in a carrying bag.The processing engine allows for easy setup via four presets (Music, Live, Speech, and Club), three-band EQ, five user-programmable presets (Store and Recall settings), output delay, phantom power (+15V), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.The new Electro-Voice QuickSmart Mobile application utilizes Bluetooth® Low Energy (BTLE) technology for the wireless configuration, control, and monitoring of up to six EVOLVE 50 systems simultaneously. High resolution Bluetooth® audio streaming adds convenience for wireless music playback in breakout rooms, intermission, and musical accompaniment.
The HD 200 PRO monitoring headphones are made to ensure detailed and powerful studio sound wherever you are. No matter if you record your own tunes at home, in the rehearsal room or on stage, or simply enjoy listening to your favorite music at home, the HD 200 PRO is your ideal companion for every monitoring task. Built on the successful HD4x1 series, the HD 200 PRO features Sennheiser’s proprietary neodymium magnets, which deliver an excellent and powerful sound reproduction. The closed, over-ear, lightweight design offers excellent comfort and isolation from external ambient noise, which is optimal for long creative monitoring sessions (e.g. electronic piano, laptop, mixing consoles). The HD 200 PRO features soft ear and headband cushions for enhanced fit and comfort, 2m straight and single-sided cable for tangle-free freedom of movement, a 6.3mm stereo adapter to optimize connectivity with other equipment, such as e-pianos. Features:Closed-back over-ear design offers excellent attenuation of external noiseProprietary neodymium magnets ensure detailed sound with loads of low-end punchLightweight design with soft ear cushions provide outstanding comfortRobust single-sided 2m (6.56') cable gives rise to tangle-free, unencumbered movement1/4" stereo jack adapter is includedSpecifications:Frequency response: 20 – 20,000Hz Sound pressure level (SPL) at 1kHz/1Vrms: 108dB Impedance: 32ΩTHD – total harmonic distortion (1 kHz, 100 dB SPL):
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers. The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). Specifications:Conductor: OFCConductor section: 2 x 0.1 in² / 2 x 2.5 mm²Length: 1 mResistance: 0.008 ΩCapacitance: 62.890 pF/m
![Lumene Movie Palace UHD 4K/8K Platinum 300C [16:9] Ultra Slim](https://www.athensproaudio.gr/storage/infocube_image_cache/300x300/i3commerce/images/l/u/lumene_movie_palace_uhd_4k8k_platinum_170c_169_ultra_slim.jpg?ext=jpg&v=08122025 "Lumene Movie Palace UHD 4K/8K Platinum 300C [16:9] Ultra Slim")
Movie Palace is the best-selling frame video projection screen in France.It’s made for dedicated cinemas and as a Platinum version, the canvas is optimised for 4K and 8K video projection. As an Ultra Slim version, the frame is only 15 mm thick. With this ultra-slim profile it discreetly fits perfectly into all interiors and ensures perfect tension thanks to its fastening system. Being modern, it meets current trends while maintaining the projection qualities for which Lumene is renowned. Projection surface: Lumene UHD 4K/8K PlatinumGain: 1.3Directivity: 130°.Black back: NoProcessing: Anti yellowing, Anti dust, Anti warpingBlack edges on all sides (mm): 15Frame: AluminiumClip fasteners: YesWarranty: 2 years.
![Lumene Embassy HD 150C [16:9] Electric Screen](https://www.athensproaudio.gr/storage/infocube_image_cache/300x300/i3commerce/images/f/i/file_7.jpg?ext=jpg&v=08122025 "Lumene Embassy HD 150C [16:9] Electric Screen")
The Embassy HD is a motorized video projection screen that will seduce you with its simplicity and robustness. Easy to install, it offers a clear, precise and pleasant image. To offer an unforgettable cinematic experience, the image must be perfect. Lumene therefore offers a selection of flawless fabrics for unparalleled sharpness. They are worked with different gains allowing you to manage your contrasts with precision. The Embassy HD has black borders on all its canvases to precisely define the frame of the image and help avoid unwanted reflections. The contrast impression is then considerably enhanced.Adaptable, the fabric is extended to match your interior for high ceiling installations, this is called extra-drop. It’s also possible to install your screen in front of a window, as Lumene fabrics have an opaque black backing to prohibit any light permeating through. The quality of a video projection screen also depends on its housing. At Lumene we have chosen aluminium for its lightness, solidity and anti-corrosion properties. The finish is also lacquered to avoid dust deposits and facilitate easy maintenance of your screen.The integrated motor system is robust whilst quiet and reliable. The Embassy HD will also integrate very well with the decoration of your interior, so once you’ve found the space of your choice, installing your screen is quick and easy. The Embassy HD can be hung on the wall or ceiling using a screw fastening system. Your comfort is our priority, so we’ve designed an infared remote control for easy operation and an RS232 Communication Technology serial port to allow intuitive home automation integration and the ultimate in convenience. All our screen canvases are treated to avoid yellowing and are guaranteed for 2 years. Our after-sales service ensures fast and efficient handling so all you have to do is to relax and enjoy the show.Projection surface: Lumene HD canvasGain: 1.0Directivity: 160°.Black back: YesProcessing: Anti yellowing, Anti dust, Anti warpingBlack edges on sides (mm): 30Low black edge (mm): 55High black edge (mm): 700Housing: AluminiumRemote control: includedConnectivity: RS232IR offset: suppliedClip fasteners: YesWarranty: 2 years.
Super easy setupWiiM Pro will pop up automatically in the WiiM Home app.Follow the in-app guide and start streaming music in less than 2 minutes.Unrivaled Sound Quality up to 192 kHz/24-bitDiverging from the norm of resampling to set sample rate and bit depth, WiiM Pro stands out by delivering unaltered audio up to 192kHz, 24-bit quality. That's the same as an artist's recording in the studio. The advanced TI PCM5121 DAC produces a remarkable 106 dB SNR and an impressive -92dB THD+N performance.All your content in one appWe support many popular music streaming services in our WiiM Home app with more to come. Or connect to your NAS or local files to stream your favorite music.Play music everywhere with multi-room audioEasily build your multiroom sound system with your existing AirPlay 2 speakers, Amazon Echo, and Google Home devices. Using your legacy audio devices, you can create a more flexible multiroom sound system with multiple WiiM Pros, WiiM Minis, or Linkplay-powered devices. WiiM Pro supports multiroom from various audio source inputs, including WiFi, BT, Aux, and SPDIF input, making it versatile with almost every music listening option.Auto calibration of audio delayThe connected receiver or speaker may have different audio path latency due to different hardware, software and DSP processing. To maintain the synchronization of each system, it's desirable to measure the audio path delay automatically. By leveraging the on-device microphone and proprietary algorithm, the entire audio path latency is measured automatically when it's connected with the receiver or speaker. The latency value will be used to maintain the perfect audio synchronization in wireless multi-room or multi-channel playback.
Super easy setupWiiM Pro will pop up automatically in the WiiM Home app.Follow the in-app guide and start streaming music in less than 2 minutes.Unrivaled Sound Quality up to 192 kHz/24-bitDiverging from the norm of resampling to set sample rate and bit depth, WiiM Pro stands out by delivering unaltered audio up to 192kHz, 24-bit quality. That's the same as an artist's recording in the studio. The advanced TI PCM5121 DAC produces a remarkable 106 dB SNR and an impressive -92dB THD+N performance.All your content in one appWe support many popular music streaming services in our WiiM Home app with more to come. Or connect to your NAS or local files to stream your favorite music.Play music everywhere with multi-room audioEasily build your multiroom sound system with your existing AirPlay 2 speakers, Amazon Echo, and Google Home devices. Using your legacy audio devices, you can create a more flexible multiroom sound system with multiple WiiM Pros, WiiM Minis, or Linkplay-powered devices. WiiM Pro supports multiroom from various audio source inputs, including WiFi, BT, Aux, and SPDIF input, making it versatile with almost every music listening option.Auto calibration of audio delayThe connected receiver or speaker may have different audio path latency due to different hardware, software and DSP processing. To maintain the synchronization of each system, it's desirable to measure the audio path delay automatically. By leveraging the on-device microphone and proprietary algorithm, the entire audio path latency is measured automatically when it's connected with the receiver or speaker. The latency value will be used to maintain the perfect audio synchronization in wireless multi-room or multi-channel playback.
The FC 3 is a high quality dual capsule condenser microphone, inspired by classical microphone models. The FC 3 is a very versatile microphone with a wide frequency response and a large dynamic range. It will perform great in the studio or in live sound and broadcast applications. It΄s sound character is similair to vintage microphones and it is well suited to be used with most instruments and voices. Use it on vocals and choirs, acoustic and electric guitars and other fretted instruments, as a drum overhead or room mic and in any other application where you would use a big capsule condenser mic. The FC 3 is, in spite of it΄s low cost, suitable for critical recording applications.
A studio classic, ready for the futureFor over 100 years, outstanding sound has been our passion. The DT 990 PRO X continues this tradition – with iconic sound, exceptional comfort, and the powerful STELLAR.45 driver system. Handcrafted in Germany and designed with replaceable parts, the DT 990 PRO X is an investment in the future. A headphone that inspires you today and still accompanies you tomorrow.Hear every DetailThe DT 990 PRO X builds upon the proven sound signature of the DT 990 PRO and takes it to a new level. With its natural treble lift and impressive transparency, it reveals acoustic imperfections, acting as a sonic magnifier – and the perfect complement to studio monitors in the production process. Its clear and spacious sound makes it ideal for analytical listening and precise editing. Airy, detailed, incomparable.STELLAR.45 – MAXIMUM SOUND ACCURACY ON ANY DEVICESound quality without compromise. The STELLAR.45 driver, with a wide frequency range of 5 – 40,000 Hz and an impedance of 48 ohms, delivers premium studio sound – regardless of the playback device. Designed and manufactured in Germany, the driver system impresses with outstanding dynamics, extremely low distortion, and remarkable detail accuracy. Flexible, powerful, second to none.Detachable cable: for maximum freedomThe DT 990 PRO X comes with a detachable cable featuring a locking mini-XLR connector for maximum security. The 3.5 mm jack, including a 6.3 mm adapter, lets you connect your headphones to almost any device – from audio interfaces to high-end amplifiers. Your sound, your rules.Ultra-comfortable even during long sessionsCreate music all day – no pressure points, no fatigue. The soft velour ear pads of the DT 990 PRO X gently envelop your ears, while the flexible headband construction ensures a secure fit. The padded headband adapts perfectly to your head shape, while the clever fontanelle recess provides noticeably greater comfort. Lightweight, breathable, and durable – a headphone you’ll never want to take off.Built for professionals Made to last a lifetimeThe DT 990 PRO X embodies decades of engineering excellence and uncompromising performance. Made in Germany stands for more than just quality – it represents a well-thought-out, durable design. Premium metal components make it tough enough to withstand even the most demanding studio days. And with replaceable parts, this is a headphone you can rely on – today, tomorrow, and for years to come.
THE SOUND SIGNATURE OF A LEGENDFor decades, professionals have relied on the DT 770 PRO for its distinctive sound signature. The over-ear, closed-back DT 770 PRO X continues this legacy, delivering powerful bass, detailed highs, and exceptional impulse response. Its closed design makes it a reliable companion for recording and monitoring tasks. Experience flexible and high-performance studio quality that inspires.STELLAR.45 – MAXIMUM SOUND FIDELITY ON ANY DEVICEWhether in the studio, on the go or at a laptop – the STELLAR.45 driver (5–40,000 Hz) delivers impressive sound accuracy in every setting. A neodymium magnet and copper-plated precision coil ensure low-distortion sound, even at high volumes. With its 48-ohm impedance, it provides studio-quality audio even on devices with low output power.YOU ASKED – WE DELIVERED: DETACHABLE CABLEMore freedom, more possibilities: The DT 770 PRO X features a detachable cable with a locking mini-XLR connector for maximum stability. With a 3.5 mm jack and a 6.3 mm adapter, it connects to almost any device. Your studio, your rules.THE MOST COMFORTABLE 770 EVERStudio icon meets ultimate wearing comfort: The iconic velour ear pads of the DT 770 PRO X remain comfortable even during long sessions. The sturdy spring steel headband ensures a perfect fit, while the replaceable headband adapts perfectly to your head shape – now with a new fontanelle recess for even better comfort.Features:Circumaural studio headphones for recording and monitoring For a range of devices thanks to a flexible STELLAR.45 driver Includes detachable cable with mini XLR connector Extremely comfortable, even after hours of use Made in Germany
