Audio Technica

This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz. Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 25,000Hz frequency response VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C, AT-VMN95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH, AT-VMN95SP AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers. VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers. Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli. The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing. The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction. ATN-XP7, ATN-XP5, ATN-XP3 Shibata Stylus Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume. No use of nuts VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

The VM760SLC special line contact stylus cartridge is the flagship model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM760SLC is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s ultra-lightweight special line contact stylus allows it to trace the record groove with incredible accuracy and minimum abrasion, resulting in nuanced audio reproduction, low distortion and low record wear. Includes mounting hardware.

This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

The ATR4650-USB is a small condenser boundary microphone that is convenient for podcasting, video- and teleconferencing, and casual recording applications, such as meetings, conversations, and note-taking. The microphone features an omnidirectional pickup pattern to provide full 360° coverage. Its 1.8 m (6') cable is terminated with a USB-C connector and comes with a USB-C to USB-A adapter, allowing you to connect to the USB input on computers, tablets, smartphones, and other devices. With its integral clothing clip, the ATR4650-USB can also be used as a lapel mic. Or it can be snapped into the included slim-profile monitor mount and affixed to a computer monitor or other surface.

Turn any microphone or pair of headphones with a 3.5 mm (1/8") plug into a USB-compatible device. The ATR2x-USB audio adapter is equipped with 3.5 mm (1/8") microphone and headphone inputs and a USB-C output, plus a mute button and volume control. A USB-C to USB-A adapter is also included for greater compatibility. The ATR2x-USB provides plug-in power for microphones that require it.

Dual moving coil stereo cartridge with bonded Elliptical stylus AT-OC9XEB Dual moving coil stereo cartridge with bonded Elliptical stylus, Features a bonded Elliptical stylus and aluminium cantilever and A neodymium magnet and pure iron yoke provide increased magnetic energy. The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. An excellent affordable introduction to the characteristics that is moving coil. Features bonded Elliptical stylus and aluminium cantilever A neodymium magnet and pure iron yoke provides increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible Elliptical Bonded Stylus Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion. Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction.

Dual moving coil stereo cartridge with Microlinear stylus AT-OC9XML Dual moving coil stereo cartridge with Microlinear stylus - Features nude Microlinear stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartridge body The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Microlinear complex diamond profile enabling higher frequency response, detail like never before experienced and limiting inner groove distortion. Microlinear diamond profile provides low record and stylus wear. Features nude Microlinear stylus and boron cantilever which provides lower distortion and high transient response A neodymium magnet and permendur yoke provides dramatically increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer  Microlinear Stylus Microlinear diamond profile offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli. Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Dual moving coil stereo cartridge with Elliptical nude stylus AT-OC9XEN Dual moving coil stereo cartridge with Elliptical nude stylus - Features low mass nude elliptical stylus and aluminium cantilever, A neodymium magnet and pure iron yoke provide increased magnetic energy and Features threaded inserts in the cartr. The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval. Features low mass nude elliptical stylus and aluminium cantilever A neodymium magnet and pure iron yoke provide increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible Elliptical Nude Stylus Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion. Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction.

Dual moving coil stereo cartridge with Shibata stylus AT-OC9XSH Dual moving coil stereo cartridge with Shibata stylus - Features a Nude Shibata stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartridge body The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Shibata profile diamond originally design for Quadraphonic replay offers a depth of sound, combined with high frequency response that has to be heard to be believed. Features nude Shibata stylus and boron cantilever with rich low frequency reproduction and high transient response A neodymium magnet and permendur yoke provides dramatically increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer  Shibata Stylus Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume. Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Dual moving coil stereo cartridge with Special Line Contact stylus AT-OC9XSL Dual moving coil stereo cartridge with Special Line Contact stylus - Features a Nude Special Line Contact stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartri. The next Generation of the legendary OC9 cartridge series Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve. Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response A neodymium magnet and permendur yoke provides dramatically increased magnetic energy Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required  Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer  Special Line Contact Stylus Special Line Contact diamond profile offers the ultimate in accurate sonic reproduction Easy mounting Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required. Aluminium Body Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO 8HEx is ideal for guitarists, keyboard players, drummers, and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional-quality vocal pickup with hands-free operation, the PRO 8HEx features a pivot-mounted flexible mic boom that descends from either the left or right side. Features: Ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance Low-visibility headband and cushioned support pads provide a stable, comfortable fit Pivot-mounted flexible mic boom descends from left or right side Hypercardioid polar pattern improves isolation of desired sound source Hi-ENERGY® neodymium element for articulate vocal reproduction

P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus. The AT85EP allows owners of Technics™, Hitachi™, Pioneer™* and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer. Designed specifically for the linear format, the AT85EP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

The newscaster-style ATR3350xiS omnidirectional lavalier microphone is engineered for intelligible, accurate voice reproduction. With its low-profile design and convenient on/off switch, this high-quality condenser is ideal for video use. It is equipped with a dual-mono 3.5 mm (1/8") output plug that, when connected to the 3.5 mm (1/8") stereo input of a video camera, DSLR, or handheld audio recorder, sends audio to both the left and right channels. The ATR3350xiS includes a clothing clip, LR44 battery, foam windscreen, and a mic/headphone adapter for use with tablets, computers, and smartphones that accommodate a 3.5 mm (1/8") headset connection. Features: Newscaster-style miniature mic is perfect for video use Dual-mono 3.5 mm (1/8") output plug connects to a video camera, DSLR, or handheld audio recorder's stereo 3.5 mm (1/8") input, to record audio on both left and right channels Omnidirectional pickup pattern offers full coverage In-line battery pack with on/off switch provides convenient control Includes mic/headphone adapter for use with tablets, computers, and smartphones that accommodate a 3.5 mm (1/8") headset connection Clothing clip, LR44 battery, foam windscreen included

Το LP5x διατηρεί το βραχίονα σχήματος J, ένα σχέδιο εμπνευσμένο από τα κλασικά μοντέλα Audio-Technica της δεκαετίας του 1960 και του '70 και διαθέτει σύστημα μεταλλικού αναρτήρα και έδρανα ακριβείας για την άμβλυνση των σφαλμάτων εντοπισμού. Ο βραχίονας διαθέτει επίσης ρυθμιζόμενο έλεγχο αντίβαρου και anti-skate ,είναι εφοδιασμένο με ελαφριά (9,3g) shell AT-HS6 και τkefal;h AT-VM95E Dual Moving Magnet. Κατασκευασμένο από αντι-δονητικά αποσβεστικά υλικά με ένθετα μεταλλικών πλαισίων βαρέως τύπου, το πικάπ AT-LP5x έχει σχεδιαστεί για να περιορίζει την ακουστική ανάδραση χαμηλής συχνότητας. To πλατό αλουμινίου με μηχανική ακρίβεια τροφοδοτείται από κινητήρα χαμηλού θορύβου με άμεση κίνηση , εξασφαλίζοντας σταθερή περιστροφή σε άξονα στα 33-1 / 3, 45 και 78 RPM. Ένα ματ απόσβεσης από καουτσούκ πάχους 5 mm, το οποίο απομονώνεται από την ανατροφοδότηση χαμηλής συχνότητας παρέχοντας παράλληλα μια εξαιρετικά σταθερή επιφάνεια για όλες τις μορφές LP, φτάνει στην κορυφή του πλατό. Το AT-LP5x διαθέτει ενσωματωμένο προενισχυτή MM / MC που επιτρέπει τη απευθείας σύνδεση του με το στερεοφωνικό ενισχυτή σας και άλλες συσκευές που δεν διαθέτουν ειδική είσοδο πικάπ. Η επιλογή των κεφαλών MM / MC επιτρέπει την εύκολη αναβάθμιση . Το πικάπ είναι επίσης εξοπλισμένο με έξοδο USB για άμεση σύνδεση με υπολογιστή.

ATN81CP  Replacement stylus for AT81CP cartridge Replacement stylus for AT81CP Conical Stylus Bonded Round Shank Construction Tracking force: 1.0 to 1.5 g (1.25 g standard)

Dual Moving Magnet Stereo Cartridge A high-end model featuring a MicroLine™ stylus in an aluminium die-cast alloy body. In addition to outstanding high-frequency reproduction, this model enables clear sound image localisation. Aluminium tapered cantilever Para-toroidal coils improve generating efficiency Centre shield plate between the left and right channels reduces crosstalk Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head. Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking. Para-toroidal generating system Para-toroidal coils improve generating efficiency and offer superb linearity since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores. Centre shield plate reduces crosstalk A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself. Type VM Type Mounting 1/2” centres Frequency Response 20 - 27,000Hz Channel Separation 28dB (1kHz) Output Channel Balance 1.0dB (1kHz) Output Voltage 4.0mV (1kHz, 5cm/sec.) Vertical Tracking Angle 23˚ Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard) Stylus Shape MicroLine™ Stylus Size 0.12 x 2.2 mil Stylus Construction Nude Square Shank Cantilever Aluminium Tapered Pipe Coil Impedance 2,700Ω (1kHz) Static Compliance 40 x 10-6 cm/dyne Dynamic Compliance 10 x 10-6 cm/dyne (100Hz) Recommended Load Impedance 47,000Ω Recommended Load Capacitance 100 – 200pF Weight 8.0g Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm Replacement Stylus VMN40ML Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1

Replacement Cable for M-Series Headphones.1.2 m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.

Replacement Cable for M-Series Headphones.1.2 m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.

AT-VMN95E  VM95 series Elliptical replacement stylus Aluminium Cantilever Elliptical stylus Bonded Round Shank

Replacement needle for AT95E  

Cut the cord, keep the vinyl. The AT-LP60XBT gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetooth® wireless connectivity. So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables. The turntable pairs with speakers, headphones or other wireless devices. With its CSR BT chipset, the turntable is even able to connect to devices that support the aptX codec, which offers much-improved sound quality over the standard SBC codec. Of course, the AT-LP60XBT can also be operated just like a regular turntable with a traditional wired connection. Either way – wired or wireless – you get outstanding audio with the ease of automatic operation controlled by front-panel start, stop and tonearm lift buttons. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup. The AT-LP60XBT plays both 33-1/3 and 45 RPM records and comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover. The turntable is available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD). * The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners. Features : High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable Compatible with aptX codec Fully automatic operation with two speeds: 33-1/3 and 45 RPM Anti-resonance, die-cast aluminum platter Redesigned tonearm base and headshell for improved tracking and reduced resonance Integral Dual Moving Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L) AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Built-in switchable phono pre-amplifier for phono- or line-level output Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover Available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD) Specifications : Type Belt drive turntable, fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminum Wow and Flutter Less than 0.25% (WTD) @ 3 kHz Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized Power Supply Requirements 100 to 240V, 50/60 Hz,0.6 A Max. Power Consumption 1.5 W Dimensions 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D Weight 2.6 kg (5.73 lbs.) Accessories Included Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) AC adapter: 12 V, 2 A Replacement Stylus: ATN3600L Communication System: Bluetooth Version 5.0 Maximum Communication Range: Line of sight - approx. 10 m (33') Compatible Bluetooth Profile: A2DP Support Codec: SBC, Qualcomm aptX

AT-LP60XUSBFully Automatic Belt-Drive Turntable (Analog & USB) Experience high-fidelity audio of vinyl & convert records to digital files Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM Built-in switchable phono pre-amplifier for phono- or line-level output Improved tracking and reduced resonance for smoother sound Integral Dual Magnet™ phono cartridge with replaceable diamond stylus Free download of the Mac & PC compatible Audacity recording software AudioTechnicaAT-LP120X-USBBlack Specifications: Drive Method Belt-drive Type fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminium Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 1 W Dimensions 359.5 mm x 97.5 mm x 373.3 mm Weight 2.6 kg Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable Cartridge & Stylus Replacement Stylus ATN3600L

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

This 0.6 mil conical cartridge fits P-mount turntables. Specifications:Frequency Response: 20-20,000 HzChannel Separation: 18 (dB at 1 kHz)Vertical Tracking Force: 1.0-1.5 g (1.25 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsOutput: 3.5 mV (1 kHz, 5 cm/sec.)Channel Balance: 2.5 dB (1 kHz)Stylus Shape: 0.6 mil conicalCantilever: Carbon fiber-reinforced ABSMount: P-mount

Model dedicated to 78 rpm records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 rpm records from a wide variety of eras.Specifications:Frequency Response: 20-20,000 HzVertical Tracking Force: 4.5-5.5 g (5.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsOutput: 3.0 mV (at 1 kHz, 5 cm/sec)Stylus Shape: 3.0 mil conicalMount: Half-inchReplacement Stylus: VMN70SP

The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.Specifications:Frequency Response: 20-25,000 HzChannel Separation: 27 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude round shankRecommended Load Impedance: 47,000 ohmsOutput: 4.5 mV (at 1 kHz, 5 cm/sec)Channel Balance: 1.5 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement Stylus: VMN30EN

The VM510CB conical stylus cartridge is the entry-level 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM510CB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. Includes mounting hardware. Specifications:VM dual magnet cartridge with 0.6 mil conical stylusAluminum cantileverParatoroidal coils improve generating efficiencyCenter shield plate between the left and right channels reduces crosstalkDurable low-resonance polymer housingFrequency Response: 20-20,000 HzChannel Separation: 25 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohms

This 0.6 mil conical cartridge fits P-mount turntables. Specifications:Frequency Response: 20-20,000 HzChannel Separation: 18 (dB at 1 kHz)Vertical Tracking Force: 1.0-1.5 g (1.25 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsOutput: 3.5 mV (1 kHz, 5 cm/sec.)Channel Balance: 2.5 dB (1 kHz)Stylus Shape: 0.6 mil conicalCantilever: Carbon fiber-reinforced ABSMount: P-mount

The ATM230PK Drum Microphone 3-Pack gives you a set of three compact microphones specifically engineered to mic rack and floor toms, snare drums and other percussion instruments. The three included ATM230 hypercardioid dynamic instrument microphones feature a proprietary capsule designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end.The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. And with their rugged metal construction, ATM230 mics are built to last in live and studio settings. Features:Pack includes three ATM230 hypercardioid dynamic instrument microphones, three AT8665 drum mounts and three soft, protective pouchesHypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceMics handle very high SPL at close rangeBig, warm low-frequency response with excellent attackLow-profile design of mics permits versatile placement around drum kitRugged, all-metal design and construction for years of trouble-free useAlso available individually (ATM230) Specifications:Element: DynamicPolar Pattern: HypercardioidFrequency Response: 30-12,000 HzOpen Circuit Sensitivity: –54 Db (1.9 Mv) Re 1v At 1 PaImpedance: 600 OhmsWeight: 292 G (10.3 Oz)Dimensions: 82.5 Mm (3.2") Long, 38.0 Mm (1.5") Maximum Diameter

Replacement Cable for M-Series Headphones.1.2 m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.

Replacement Ear Pads for Audio-Technica ATH-M50X Professional Studio Headphone

Replacement stylus for Audio-Technica AT3600L cartridge. This ATN3600L styli is compatible with the following cartridges: AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C - AT3650 - AT3626This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60.

The AT5047 is a premier studio microphone that is equally at home with vocals and instruments. Boasting an exceptionally wide dynamic range – the greatest among all Audio-Technica microphones – the AT5047 captures the full, expressive character of a sound source, no matter how loud or how soft. And since it is equipped with a transformer-coupled output, the microphone maintains a constant load output impedance, even when capturing sources at extreme SPL, resulting in a stable relationship between the mic and a mic preamp or console input.In keeping with the 50 Series’ commitment to purity of sound, the AT5047 includes the four-part rectangular element originally developed for the AT5040. Four exquisitely matched ultra-thin diaphragms function together (with outputs proprietarily summed) as Audio-Technica’s largest-ever element, providing combined surface area twice that of a standard one-inch circular diaphragm.By using four diaphragms in a single capsule, the AT5047 delivers the benefits of an exceptionally large diaphragm – along with an extremely low noise floor – without increased weight, decreased transient response or other drawbacks that typically restrict diaphragm size. The AT5047 also incorporates the AT5040’s advanced internal shock mounting design, which effectively decouples the capsule from the microphone body, and comes with the innovative AT8480 shock mount, first introduced with the AT5040.Each AT5047 microphone is hand assembled and individually inspected for 100% quality control. The microphone is enclosed in an elegant housing of aluminum and brass with a high-quality silver finish. Discrete components have been selected for optimized performance. In fact, every aspect of the microphone has been carefully considered to minimize any effects on the audio signal.Features:Exceptionally wide dynamic range captures the full, expressive character of instruments and voices – from the caress of drum brushes to powerful vocal performancesFour rectangular diaphragms (2 micron) function together to provide a combined surface area twice that of a standard one-inch circular diaphragmDiscrete components carefully selected and optimized for maximum performance and compatibility with standalone microphone preamps and console inputsTransformer-coupled output provides smooth sonic characterHand assembled and inspected for 100% quality controlAdvanced internal shock mounting decouples the capsule from the microphone bodyElegant, durable housing of aluminum and brassIncluded advanced-design custom AT8480 shock mount provides superior isolationCustom hard-shell carrying case with die-cut foam compartments offers protection during storage and transportSpecifications:Element: Fixed-charge Back Plate, Permanently Polarized CondenserPolar Pattern: CardioidFrequency Response: 20 – 20,000 HzOpen Circuit Sensitivity: -29 Db (35.5 Mv) Re 1v At 1 PaImpedance: 150 OhmsMaximum Input Sound Level: 148 Db Spl, 1 Khz At 1% T.h.d.Noise: 6 Db SplDynamic Range (Typical): 142 Db, 1 Khz At Max SplSignal-to-noise Ratio: 88 Db, 1 Khz At 1 PaPhantom Power Requirements: 48v Dc, 2.7 Ma TypicalWeight: 592 G (20.9 Oz)Dimensions: 165.3 Mm (6.51'') Long, 57.0 Mm (2.24'') Maximum Body DiameterOutput Connector: Integral 3-pin Xlrm-typeAccessories Furnished: At8480 Shock Mount For 5/8"-27 Threaded Stands; 3/8" To 5/8" Stand Adapter; Protective Carrying CaseAudio-technica Case Style: R10

High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.Features:Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range soundAnti-vibration aluminium housings ensure rich sound reproductionSelf-adjusting headband support mechanism automatically delivers the best possible fitBass-ports create tight, deep bass soundSoft foam earpads provide extra comfort while listeningSpecifications:Driver Diameter: Closed-back dynamic 53mmFrequency Response: 10 - 25,000 HzMaximum Input Power: 1,800mWSensitivity: 106 dB/mWImpedance: 40 ohmsWeight: 270g without cableCable: 3.0mConnector: 6.3mm / 3.5mm gold-plated stereo plug

The Audio Technica TAD400 are dynamic headphones which combines elements from the award winning AD open-back series and the moreaffordable T series with overall improved construction. The ATH-TAD400 is an open-air headphone design which gives your music plenty of air, helping to enhance the audio listening experience and also keeping your ears aerated and comfortableFeatures:40mm CCAW Voice Coil driver unit delivers powerful and rich bassNewly designed honeycomb case delivers a natural and smooth airflowFrequency Response: 10Hz ~ 25kHzFeatures an efficient collapsible design for space saving portability and storage3m Cable

The ATH-E70 is the flagship in-ear monitor model in the E-Series. Its accuracy and detail allow precise balancing of the mix, making it the perfect choice for monitoring on stage or mixing in the studio. Offering extended frequency response and an accurate sound stage, this model is designed for sound professionals who demand the best. The ATH-E70 features specially designed housings that provide incredible isolation. The isolation – and the comfort – are enhanced by the four sizes of silicone eartips (XS/S/M/L) and medium-size pair of Comply™ T500 foam eartips included with the headphones, which allow you to create a custom fit. The ATH-E70 also includes a detachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, a 6.3 mm (1/4") adapter, and a carrying case.  Features:Three balanced armature drivers provide accurate and extended response across the entire frequency rangeFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-CP)Includes a carrying case, 6.3 mm (1/4") adapter, silicone eartips (XS/S/M/L) and Comply™ foam eartips (M) Specifications:Type: Balanced armatureFrequency Response: 20 – 19,000 HzSensitivity: 109 dB/mWImpedance: 39 ohmsWeight: 9 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, 6.3 mm (1/4") adapter, silicone eartips (XS/S/M/L), Comply™ foam eartips (M)

The ATH-E50 features specially designed housings that provide excellent isolation, ensuring confident, comfortable stage performance. To address the evolution of modern music production, this model also excels at providing a consistent reference in every sonic environment, making it the ideal choice for the producer on the road. The sound isolation and comfort offered by the ATH-E50 are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The ATH-E50 also comes with a detachable 1.6 m (5. 2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, and a carrying case. Features:Powerful single balanced armature drivers provide an accurate full-range responseFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-C)Includes a carrying case, 6.3 mm (1/4") adapter, and silicone eartips (XS/S/M/L)​Specifications:Type: Balanced armatureFrequency Response: 20 – 18,000 HzSensitivity: 107 dB/mWImpedance: 44 ohmsWeight: 9 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, silicone eartips (XS/S/M/L), 6.3 mm (1/4") adapter  

The proprietary dual phase push-pull driver design of the ATH-E40 professional in-ear monitor headphones provides improved fidelity and efficiency. These headphones deliver powerful bass along with balanced mid and high frequencies to convey the full emotion of the music from the stage to the street. The ATH-E40 features specially designed housings that provide incredible isolation. The isolation – and the comfort – are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The headphones also come with a detachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, and a carrying case.  Features:Proprietary dual phase push-pull drivers excel in monitoring applications by providing exceptional accuracy and clarityFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-C)Includes a carrying case, 6.3 mm (1/4") adapter, and silicone eartips (XS/S/M/L) Specifications:Type: DynamicFrequency Response: 20 – 20,000 HzSensitivity: 107 dB/mWImpedance: 12 ohmsWeight: 10 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, silicone eartips (XS/S/M/L), 6.3 mm (1/4") adapter

With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production, reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide variety of cameras and recording devices. The channel selection, instant timing and configuration to camera models make it extremely easy to use, while its digital wireless operating at 24-bit / 48 kHz brings ultimate sound quality and reliable performance in the band 2.4 Ghz, away from interference of DTV or 4G.The ATW-1701/P system includes an ATW-R1700 receiver, ATW-T1001 bodypack transmitter and an ATR35cW lapel microphone. There is also a complete handheld microphone system (ATW-1702) or the pocket transmitter without microphone (ATW-1701).Specifications:24-bit / 48 kHz Digital wireless system, combining excellent sound quality and reliabilityFrequency range 2.4 GHz, operating outside of DTV or 4G bandsAutomatic Frequency Selection. Plug & Play. Ease of use and reliabilityOffers 3 levels of diversity (frequency, time and space) to ensure communication without interferenceUltra compact and lightweight receiver (105 g) with multiple mounting optionsExtremely easy to use, with channel selection, timing and instant setupOutput jacks balanced and unbalanced with selectable level control for use with most cameras and recording devices (3.5mm stereo mini jack output)Internal rechargeable battery with a life of 12 hoursIndependent headphone jack and volume control for local audio cueingAudio output attenuator on the receiver (0dB / 10dB / 20dB) for adjusting the sensitivityOmni lavalier microphone 

With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production, reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide variety of cameras and recording devices.The channel selection, instant timing and configuration to camera models make it extremely easy to use, while its digital wireless operating at 24-bit / 48 kHz brings ultimate sound quality and reliable performance in the band 2.4 Ghz, away from interference of DTV or 4G. The ATW-1702 system includes an ATW-R1700 receiver and an ATW-T1002 handheld dynamic cardioid microphone and transmitter. There is also a complete system (ATW-1701/P) with lavalier microphone or (ATW-1701) with just the bodypack transmitter and no microphone.Specifications:24-bit / 48 kHz Digital wireless system, combining excellent sound quality and reliabilityFrequency range 2.4 GHz, operating outside of DTV or 4G bandsAutomatic Frequency Selection. Plug & Play. Ease of use and reliabilityOffers 3 levels of diversity (frequency, time and space) to ensure communication without interferenceUltra compact and lightweight receiver (105 g) with multiple mounting optionsExtremely easy to use, with channel selection, timing and instant setupOutput jacks balanced and unbalanced with selectable level control for use with most cameras and recording devices (3.5mm stereo mini jack output)Internal rechargeable battery with a life of 12 hoursIndependent headphone jack and volume control for local audio cueingAudio output attenuator on the receiver (0dB / 10dB / 20dB) for adjusting the sensitivity 

With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone. The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders.Specifications:Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphoneSelectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environmentHandles loud sound sources without distortionThree-position adjustable attenuator and switchable low-frequency roll-offIntegral rubber shock mounts isolate the microphone from vibration and mechanical camera noiseCompact, lightweight design with integral shoe mountRed/green LED power indicatorIncludes windscreen, fuzzy windscreen and AA battery