Audio Technica

Η κεφαλή VM95 Series με κωνική βελόνα 3,0 mil ταιριάζει με πικάπ στήριξης μισής ίντσας. Ενώ αυτή η κεφαλή έχει σχεδιαστεί για αναπαραγωγή μονοφωνικών εγγραφών 78 RPM, είναι, ωστόσο, μια στερεοφωνική κεφαλή, που επιτρέπει στους χρήστες να επιλέγουν μεταξύ των αριστερών και των δεξιών καναλιών, κάτι που μπορεί να είναι ιδιαίτερα χρήσιμο στην αρχειοθέτηση εφαρμογών για την ελαχιστοποίηση του θορύβου και της παραμόρφωσης. Το ανθεκτικό περίβλημα χαμηλού συντονισμού περιλαμβάνει ένθετα με σπείρωμα που επιτρέπουν  να στερεωθεί στο κέλυφος  με δύο μόνο βίδες - χωρίς παξιμάδια . Δεδομένου ότι όλες οι σειρές VM95 έχουν το ίδιο σώμα, η Βελόνα μπορεί να αντικατασταθεί με οποιοδήποτε από τα έξι εναλλάξιμα στυλ AT-VMN95. Συμβατή με τις ανταλλακτικές βελόνες AT-VMΝ95C, AT-VMΝ95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH, AT-VMN75SP

Χειροποίητη κεφαλή,Τύπος: VM Stereo Dual Magnet

Η AT-VM95EN, διαθέτει "γυμνό" ελλειπτικό διαμάντι. Η κατασκευή της είναι ένα διαμάντι ενός τεμαχίου με ένα στρογγυλό κορμό που εισάγεται στο πρόβολο δημιουργεί ένα ελαφρύτερο και πιο άκαμπτο σύστημα μετάδοσης από ένα άκρο διαμαντιού συνδεδεμένο σε στρογγυλό κορμό τιτανίου όπως στην AT-VM95E. Επίσης, η χρήση "γυμνού" διαμαντιού αποκαλύπτει σημαντική διαφορά στην ποιότητα της αναπαραγωγής που θα παρατηρηθεί αμέσως, συγκεκριμένα στην πιστότητα των υψηλών συχνοτήτων και στην ποιότητα των γρήγορων εναλλαγών.Τάση εξόδου 3,5 mV.

Η AT-VM95C με Έξοδο 4.0 mV. Το νέο μοντέλο Audio-Technica Conical cartridge αντικατάστησε τα θρυλικά μοντέλα της σειράς AT90 όπως τα AT91, AT91R και CN5625AL Η AT-VM95C είναι μια κεφαλή "χαμηλού προϋπολογισμού" που διαθέτει μια κωνική βελόνα , διαθέτει βελτιωμένο και ξεχωριστό σχεδιασμό που έχει ως αποτέλεσμα ένα πιο άκαμπτο περίβλημα, και δύο βιδωτά ένθετα στο σώμα της κεφαλής που επιτρέπουν την τοποθέτησή της στο Shell με δύο μόνο βίδες, χωρίς παξιμάδια. Η συμβατότητα της θα επιτρέψει την αναβάθμιση με οποιοδήποτε βελόνα από τις άλλες 4 της σειράς, όπως η Elliptical, η Elliptical Nude, η Microlinear και η Shibata.

The VM760SLC special line contact stylus cartridge is the flagship model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM760SLC is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s ultra-lightweight special line contact stylus allows it to trace the record groove with incredible accuracy and minimum abrasion, resulting in nuanced audio reproduction, low distortion and low record wear. Includes mounting hardware.

Χειροποίητη κεφαλή με βελόνα microlinear. Τύπος κεφαλής VM Stereo dual magnetic, διαθέτει TPC πηνία, έξοδος: 3.5mV, 20-25000Hz, συνιστώμενη αντίσταση 47ΚΩ, διαθέτει ενσωματωμένο μεταλλικό σπείρωμα τοποθέτησης.

Πυκνωτικό μικρόφωνο boundary μικρού διαφράγματος με σύνδεση USB για υπολογιστές, tablet, κινητά τηλέφωνα. Κατάλληλο για podcast, βίντεο, τηλεδιασκέψεις και καθημερινές απλές εφαρμογές όπου απαιτείται χρήση μικροφώνου.

Μετατροπέας ακουστικών / μικροφώνου από mini-jack 3,5" σε USB.

Η Audio-Technica AT-OC9XML κεφαλή κινητού πηνίου (Dual Moving Coil) με ελλειπτική βελόνα.

Η Audio-Technica AT-OC9XEN κεφαλή κινητού πηνίου (Dual Moving Coil) με ελλειπτική βελόνα.

Η Audio-Technica AT-OC9XSH κεφαλή κινητού πηνίου (Dual Moving Coil) με ελλειπτική βελόνα.

Η Audio-Technica AT-OC9XSL κεφαλή κινητού πηνίου (Dual Moving Coil) με ελλειπτική βελόνα.

Προσφέροντας πολύ κατανοητή αναπαραγωγή φωνής, το άνετο, ελαφρύ PRO8HEx είναι ιδανικό για κιθαρίστες, πιανίστες, drummers και άλλους που χρειάζονται τα χέρια τους ελεύθερα κατά την εκτέλεση. Στήριγμα κεφαλής με χαμηλή ορατότητα και στέκα υποστήριξης παρέχουν μια σταθερή, άνετη εφαρμογή. Σχεδιασμένο για επαγγελματικής ποιότητας καταγραφή φωνής με τη λειτουργία hands-free, το PRO8HEx διαθέτει έναν ευέλικτο βραχίονα μικροφώνου που κατεβαίνει είτε από την αριστερή ή τη δεξιά πλευρά.

Χειροποίητη κεφαλή για πικάπ με κεφαλές P-MOUNT Dual Moving Magnet με κωνική ακίδα της βελόνας. Η AT85 επιτρέπει στους κατόχους των Technics ™, Hitachi ™, Pioneer ™ * και παρόμοιων πικάπ με υποδοχές T4P να απολαμβάνουν τον ήχο υψηλής πιστότητας που μπορεί να προσφέρει μόνο η Audio-Technica. Συμπεριλαμβάνεται και ο αντάπτορας P/U mount.

Για συσκευές iOS και Android.Το ATR3350 πανκατευθυντικό μικρόφωνο πέτου (ψείρα) της Audio-Technica έχει σχεδιαστεί για κατανοητή, ακριβή αναπαραγωγή φωνής. Αυτό το υψηλής ποιότητας πυκνωτικό μικρόφωνο είναι ιδανικό για χρήση βίντεο, και είναι μια αγαπημένη επιλογή για αεροβική γυμναστική / χορό / εκπαιδευτές σπορ. Σχεδίαση χαμηλού προφίλ διασφαλίζει την ελάχιστη ορατότητα. Features: Newscaster-style miniature mic is perfect for video use Dual-mono 3.5 mm (1/8") output plug connects to a video camera, DSLR, or handheld audio recorder's stereo 3.5 mm (1/8") input, to record audio on both left and right channels Omnidirectional pickup pattern offers full coverage In-line battery pack with on/off switch provides convenient control Includes mic/headphone adapter for use with tablets, computers, and smartphones that accommodate a 3.5 mm (1/8") headset connection Clothing clip, LR44 battery, foam windscreen included

Το LP5x διατηρεί το βραχίονα σχήματος J, ένα σχέδιο εμπνευσμένο από τα κλασικά μοντέλα Audio-Technica της δεκαετίας του 1960 και του '70 και διαθέτει σύστημα μεταλλικού αναρτήρα και έδρανα ακριβείας για την άμβλυνση των σφαλμάτων εντοπισμού. Ο βραχίονας διαθέτει επίσης ρυθμιζόμενο έλεγχο αντίβαρου και anti-skate ,είναι εφοδιασμένο με ελαφριά (9,3g) shell AT-HS6 και τkefal;h AT-VM95E Dual Moving Magnet. Κατασκευασμένο από αντι-δονητικά αποσβεστικά υλικά με ένθετα μεταλλικών πλαισίων βαρέως τύπου, το πικάπ AT-LP5x έχει σχεδιαστεί για να περιορίζει την ακουστική ανάδραση χαμηλής συχνότητας. To πλατό αλουμινίου με μηχανική ακρίβεια τροφοδοτείται από κινητήρα χαμηλού θορύβου με άμεση κίνηση , εξασφαλίζοντας σταθερή περιστροφή σε άξονα στα 33-1 / 3, 45 και 78 RPM. Ένα ματ απόσβεσης από καουτσούκ πάχους 5 mm, το οποίο απομονώνεται από την ανατροφοδότηση χαμηλής συχνότητας παρέχοντας παράλληλα μια εξαιρετικά σταθερή επιφάνεια για όλες τις μορφές LP, φτάνει στην κορυφή του πλατό. Το AT-LP5x διαθέτει ενσωματωμένο προενισχυτή MM / MC που επιτρέπει τη απευθείας σύνδεση του με το στερεοφωνικό ενισχυτή σας και άλλες συσκευές που δεν διαθέτουν ειδική είσοδο πικάπ. Η επιλογή των κεφαλών MM / MC επιτρέπει την εύκολη αναβάθμιση . Το πικάπ είναι επίσης εξοπλισμένο με έξοδο USB για άμεση σύνδεση με υπολογιστή.

ATN81CP  Replacement stylus for AT81CP cartridge Replacement stylus for AT81CP Conical Stylus Bonded Round Shank Construction Tracking force: 1.0 to 1.5 g (1.25 g standard)

Dual Moving Magnet Stereo Cartridge A high-end model featuring a MicroLine™ stylus in an aluminium die-cast alloy body. In addition to outstanding high-frequency reproduction, this model enables clear sound image localisation. Aluminium tapered cantilever Para-toroidal coils improve generating efficiency Centre shield plate between the left and right channels reduces crosstalk Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head. Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking. Para-toroidal generating system Para-toroidal coils improve generating efficiency and offer superb linearity since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores. Centre shield plate reduces crosstalk A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself. Χαρακτηριστικά : Τύπος: VM Dual Magnet Πηνία: τύπου paratoroidal με PCOCC Cantilever: Aluminium Tapered Pipe Τύπος ακίδας: Nude MicroLine® 2.2 x 0.12 mil Έξοδος: 4.0mV Απόκριση Συχνότητας: 20Hz -27KHz Διαχωρισμός καναλιών: 28 dB Ισορροπία καναλιών: 1.0 dB Βάρος Ανάγνωσης: 1.8-2.2 g (2.0 g standard) Συνιστώμενη Αντίσταση: 47 KΩ Στατική Ενδοτικότητα: 40 x 10-6 cm/dyne Δυναμική Ενδοτικότητα: 10 x 10-6 cm/dyne Βάρος: 8.0 gr Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Replacement Cable for M-Series Headphones. 3m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.   

Replacement Cable for M-Series Headphones.1.2 m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.   

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή AT-VM95E Συμβατή και με τις κεφαλές AT-VM95C, AT-VM95EN, AT-VM95ML, AT-VM95SH, AT-VM95SP

Ανταλλακτική βελόνα για την κεφαλή AT95E

Cut the cord, keep the vinyl. The AT-LP60XBT gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetooth® wireless connectivity. So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables. The turntable pairs with speakers, headphones or other wireless devices. With its CSR BT chipset, the turntable is even able to connect to devices that support the aptX codec, which offers much-improved sound quality over the standard SBC codec. Of course, the AT-LP60XBT can also be operated just like a regular turntable with a traditional wired connection. Either way – wired or wireless – you get outstanding audio with the ease of automatic operation controlled by front-panel start, stop and tonearm lift buttons. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup. The AT-LP60XBT plays both 33-1/3 and 45 RPM records and comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover. The turntable is available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD). * The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners. Features : High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable Compatible with aptX codec Fully automatic operation with two speeds: 33-1/3 and 45 RPM Anti-resonance, die-cast aluminum platter Redesigned tonearm base and headshell for improved tracking and reduced resonance Integral Dual Moving Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L) AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Built-in switchable phono pre-amplifier for phono- or line-level output Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover Available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD) Specifications : Type Belt drive turntable, fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminum Wow and Flutter Less than 0.25% (WTD) @ 3 kHz Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized Power Supply Requirements 100 to 240V, 50/60 Hz,0.6 A Max. Power Consumption 1.5 W Dimensions 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D Weight 2.6 kg (5.73 lbs.) Accessories Included Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) AC adapter: 12 V, 2 A Replacement Stylus: ATN3600L Communication System: Bluetooth Version 5.0 Maximum Communication Range: Line of sight - approx. 10 m (33') Compatible Bluetooth Profile: A2DP Support Codec: SBC, Qualcomm aptX

AT-LP60XUSBFully Automatic Belt-Drive Turntable (Analog & USB) Experience high-fidelity audio of vinyl & convert records to digital files Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM Built-in switchable phono pre-amplifier for phono- or line-level output Improved tracking and reduced resonance for smoother sound Integral Dual Magnet™ phono cartridge with replaceable diamond stylus Free download of the Mac & PC compatible Audacity recording software AudioTechnicaAT-LP120X-USBBlack Specifications: Drive Method Belt-drive Type fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminium Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 1 W Dimensions 359.5 mm x 97.5 mm x 373.3 mm Weight 2.6 kg Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable Cartridge & Stylus Replacement Stylus ATN3600L

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.   Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT95E and AT95EX 20 to 22,000Hz frequency response

Με ένα εξειδικευμένο σώμα και εσωτερική καλωδίωση αφιερωμένη στην αναπαραγωγή μονοφωνικού ήχου, καθώς και μια μεγάλη κωνική γραφίδα ακτίνας καμπυλότητας, η κεφαλη VM670SP έχει σχεδιαστεί για αναπαραγωγή εγγραφών 78 RPM. Μέρος της σειράς 600 στη νέα κεφαλη VM της Audio-Technica - μια γραμμή που επιστρέφει στις πρώτες μέρες της A-T ως κατασκευαστής κυρίως από κεφαλες phono υψηλού επιπέδου - το VM670SP είναι εξοπλισμένο με διπλούς μαγνήτες που είναι εσωτερικά συνδεδεμένοι για να μειώσουν τον θορυβο εγγραφης και να αποκτήσετε μια εξαιρετικά εστιασμένη "κεντρική" εικόνα ήχου που δεν μπορούν να παρέχουν οι στερεοφωνικές κασέτες.Χαρακτηριστικά:Frequency Response: 20-20,000 HzVertical Tracking Force: 4.5-5.5 g (5.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsOutput: 3.0 mV (at 1 kHz, 5 cm/sec)Stylus Shape: 3.0 mil conicalCantilever: Aluminum pipeMount: Half-inchReplacement Stylus: VMN70SP

The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology.Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response.The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.Χαρακτηριστικά:Frequency Response: 20-25,000 HzChannel Separation: 27 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude round shankRecommended Load Impedance: 47,000 ohmsOutput: 4.5 mV (at 1 kHz, 5 cm/sec)Channel Balance: 1.5 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement Stylus: VMN30EN

Με διεθνώς κατοχυρωμένο δίπλωμα ευρεσιτεχνίας της Audio-Technica που αναπαράγει τη δομή κοπής κεφαλής που αντί να χρησιμοποιεί ένα μόνο μεγάλο μαγνήτη,χρησιμοποιούνται δύο μαγνήτες που είναι διατεταγμένοι σε σχήμα "V". Οι δύο μαγνήτες τοποθετούνται ακριβώς έτσι ώστε να ταιριάζουν με τις θέσεις του αριστερού και του δεξιού καναλιού στα τοιχώματα των στερεοφωνικών αυλακιών. Κατά συνέπεια, ο σχεδιασμός VM εξασφαλίζει εξαιρετικό διαχωρισμό καναλιών, εκτεταμένη απόκριση συχνότητας και εκπληκτική παρακολούθηση του δίσκου.Μια χειροποίητη κεφαλή VM Dual Magnet,με Πηνία τύπου paratoroidal με PCOCC.Cantilever: Aluminium Pipe και τύπο ακίδας κωνική 0.6 mil.Έξοδος: 5.0 mV και απόκριση Συχνότητας 20Hz -20KHz.Χαρακτηριστικά:Διαχωρισμός καναλιών: 25 dBΙσορροπία καναλιών: 1.5 dBΒάρος Ανάγνωσης: 1.8-2.2 g (2.0 g standard)Συνιστώμενη Αντίσταση: 47 KΩΕνδοτικότητα: 8 x 10-6 cm/dyneΒάρος: 6.4 gr.Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.Made in Japan

Κεφαλή για πικάπ με κεφαλές P-MOUNT Dual Moving Magnet με κωνική ακίδα της βελόνας.Η AT81CP επιτρέπει στους κατόχους των Technics ™, Hitachi ™, Pioneer ™ * και παρόμοιων πικάπ με υποδοχές T4P να απολαμβάνουν τον ήχο υψηλής πιστότητας που μπορεί να προσφέρει μόνο η Audio-Technica.Σχεδιασμένο ειδικά για τη γραμμική μορφή, η AT81CP διαθέτει τη μοναδική κατασκευή του διπλού κινητού μαγνητη της Audio-Technica. Το σύστημα διπλού μαγνήτη συνδυάζεται με την κατασκευή του παρα-τοροειδούς πηνίου για να εξασφαλίσει μια εξαιρετική ηχητική διαύγεια και ευρύ διαχωρισμό καναλιών.odesgr.Το προϊόν έρχεται με εργοστασιακή συσκευασία,σφραγισμένο με ταινία ασφαλείας της Audio Technica .Χαρακτηριστικά:Frequency Response: 20-20,000 HzChannel Separation: 18 (dB at 1 kHz)Vertical Tracking Force: 1.0-1.5 g (1.25 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsOutput: 3.5 mV (1 kHz, 5 cm/sec.)Channel Balance: 2.5 dB (1 kHz)Stylus Shape: 0.6 mil conicalCantilever: Carbon fiber-reinforced ABSMount: P-mount

The ATM230PK Drum Microphone 3-Pack gives you a set of three compact microphones specifically engineered to mic rack and floor toms, snare drums and other percussion instruments. The three included ATM230 hypercardioid dynamic instrument microphones feature a proprietary capsule designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end. The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. And with their rugged metal construction, ATM230 mics are built to last in live and studio settings. Προδιαγραφές:Pack includes three ATM230 hypercardioid dynamic instrument microphones, three AT8665 drum mounts and three soft, protective pouchesHypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceMics handle very high SPL at close rangeBig, warm low-frequency response with excellent attackLow-profile design of mics permits versatile placement around drum kitRugged, all-metal design and construction for years of trouble-free useAlso available individually (ATM230) Χαρακτηριστικά:Element: DynamicPolar Pattern: HypercardioidFrequency Response: 30-12,000 HzOpen Circuit Sensitivity: –54 Db (1.9 Mv) Re 1v At 1 PaImpedance: 600 OhmsWeight: 292 G (10.3 Oz)Dimensions: 82.5 Mm (3.2") Long, 38.0 Mm (1.5") Maximum Diameter

Replacement Cable for M-Series Headphones.1.2 m straight cable (black). Compatible with ATH-M40x and ATH-M50x headphones.   

Ear Pad Για Audio-Technica ATH-M50x σε Χρώμα ΜαύροΠεριλαμβάνει: 2 κομμάτια 

Replacement stylus for Audio-Technica AT3600L cartridge. This ATN3600L styli is compatible with the following cartridges: AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C - AT3650 - AT3626This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60.  

The AT5047 is a premier studio microphone that is equally at home with vocals and instruments. Boasting an exceptionally wide dynamic range – the greatest among all Audio-Technica microphones – the AT5047 captures the full, expressive character of a sound source, no matter how loud or how soft. And since it is equipped with a transformer-coupled output, the microphone maintains a constant load output impedance, even when capturing sources at extreme SPL, resulting in a stable relationship between the mic and a mic preamp or console input.In keeping with the 50 Series’ commitment to purity of sound, the AT5047 includes the four-part rectangular element originally developed for the AT5040. Four exquisitely matched ultra-thin diaphragms function together (with outputs proprietarily summed) as Audio-Technica’s largest-ever element, providing combined surface area twice that of a standard one-inch circular diaphragm.By using four diaphragms in a single capsule, the AT5047 delivers the benefits of an exceptionally large diaphragm – along with an extremely low noise floor – without increased weight, decreased transient response or other drawbacks that typically restrict diaphragm size. The AT5047 also incorporates the AT5040’s advanced internal shock mounting design, which effectively decouples the capsule from the microphone body, and comes with the innovative AT8480 shock mount, first introduced with the AT5040. Each AT5047 microphone is hand assembled and individually inspected for 100% quality control. The microphone is enclosed in an elegant housing of aluminum and brass with a high-quality silver finish. Discrete components have been selected for optimized performance. In fact, every aspect of the microphone has been carefully considered to minimize any effects on the audio signal.Προδιαγραφές:Exceptionally wide dynamic range captures the full, expressive character of instruments and voices – from the caress of drum brushes to powerful vocal performancesFour rectangular diaphragms (2 micron) function together to provide a combined surface area twice that of a standard one-inch circular diaphragmDiscrete components carefully selected and optimized for maximum performance and compatibility with standalone microphone preamps and console inputsTransformer-coupled output provides smooth sonic characterHand assembled and inspected for 100% quality controlAdvanced internal shock mounting decouples the capsule from the microphone bodyElegant, durable housing of aluminum and brassIncluded advanced-design custom AT8480 shock mount provides superior isolationCustom hard-shell carrying case with die-cut foam compartments offers protection during storage and transportΧαρακτηριστικά:Element: Fixed-charge Back Plate, Permanently Polarized CondenserPolar Pattern: CardioidFrequency Response: 20 – 20,000 HzOpen Circuit Sensitivity: -29 Db (35.5 Mv) Re 1v At 1 PaImpedance: 150 OhmsMaximum Input Sound Level: 148 Db Spl, 1 Khz At 1% T.h.d.Noise: 6 Db SplDynamic Range (Typical): 142 Db, 1 Khz At Max SplSignal-to-noise Ratio: 88 Db, 1 Khz At 1 PaPhantom Power Requirements: 48v Dc, 2.7 Ma TypicalWeight: 592 G (20.9 Oz)Dimensions: 165.3 Mm (6.51'') Long, 57.0 Mm (2.24'') Maximum Body DiameterOutput Connector: Integral 3-pin Xlrm-typeAccessories Furnished: At8480 Shock Mount For 5/8"-27 Threaded Stands; 3/8" To 5/8" Stand Adapter; Protective Carrying CaseAudio-technica Case Style: R10 

Δυναμικά Ακουστικά κλειστού τύπου,Χαρακτηριστικά:Αυτορυθμιζόμενο headbandΚέλυφος από κατεργασμένο αλουμίνιο για μηδενικούς συντονισμούς και υψηλής ποιότητας αναπαραγωγή ήχουΕνσωματωμένα Bass-ports για ελεγχόμενα δυναμικές χαμηλές συχνότητεςDriver Diameter: Dynamic, 53 mm με πηνίο CCAW bobbin-woundΑπόκριση συχνότητας: 10Hz -25kHzMaximum Ισχύς Εισόδου: 1800 mWEυαισθησία: 106 dB/mWAντίσταση: 40 OhmCable: 3 mConnector: 6.3mm / 3.5mm gold-plated stereo plugΔιατίθεται σε μαύρο χρώμαΒάρος: 270 gr

Ακουστικά Open Air (ανοικτού τύπου)Χαρακτηριστικά:Driver Diameter: 40 mmΑπόκριση συχνότητας: 28Hz -25kHzMaximum Ισχύς Εισόδου: 300 mWOutput Sound Pressure Level: 93dBAντίσταση: 35 OhmCable: 3.0 m single-sidedConnector: 3.5 mm to 6.3 mm gold-plated stereo mini plugΔιατίθεται σε μαύρο χρώμα

The ATH-E70 is the flagship in-ear monitor model in the E-Series. Its accuracy and detail allow precise balancing of the mix, making it the perfect choice for monitoring on stage or mixing in the studio. Offering extended frequency response and an accurate sound stage, this model is designed for sound professionals who demand the best. The ATH-E70 features specially designed housings that provide incredible isolation. The isolation – and the comfort – are enhanced by the four sizes of silicone eartips (XS/S/M/L) and medium-size pair of Comply™ T500 foam eartips included with the headphones, which allow you to create a custom fit. The ATH-E70 also includes a detachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, a 6.3 mm (1/4") adapter, and a carrying case.  Προδιαγραφές:Three balanced armature drivers provide accurate and extended response across the entire frequency rangeFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-CP)Includes a carrying case, 6.3 mm (1/4") adapter, silicone eartips (XS/S/M/L) and Comply™ foam eartips (M) Χαρακτηριστικά:Type: Balanced armatureFrequency Response: 20 – 19,000 HzSensitivity: 109 dB/mWImpedance: 39 ohmsWeight: 9 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shaped  

The ATH-E50 features specially designed housings that provide excellent isolation, ensuring confident, comfortable stage performance. To address the evolution of modern music production, this model also excels at providing a consistent reference in every sonic environment, making it the ideal choice for the producer on the road. The sound isolation and comfort offered by the ATH-E50 are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The ATH-E50 also comes with a detachable 1.6 m (5. 2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, and a carrying case. Προδιαγραφές:Powerful single balanced armature drivers provide an accurate full-range responseFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-C)Includes a carrying case, 6.3 mm (1/4") adapter, and silicone eartips (XS/S/M/L) Χαρακτηριστικά:Type: Balanced armatureFrequency Response: 20 – 18,000 HzSensitivity: 107 dB/mWImpedance: 44 ohmsWeight: 9 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, silicone eartips (XS/S/M/L), 6.3 mm (1/4") adapter 

The proprietary dual phase push-pull driver design of the ATH-E40 professional in-ear monitor headphones provides improved fidelity and efficiency. These headphones deliver powerful bass along with balanced mid and high frequencies to convey the full emotion of the music from the stage to the street. The ATH-E40 features specially designed housings that provide incredible isolation. The isolation – and the comfort – are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The headphones also come with a detachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, and a carrying case.  Προδιαγραφές:Proprietary dual phase push-pull drivers excel in monitoring applications by providing exceptional accuracy and clarityFlexible memory cable loops over ears for a custom fit and long-wearing comfortSpecially designed housings provide maximum isolation, allowing you to focus on the musicDetachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance (also available separately as the EP-C)Includes a carrying case, 6.3 mm (1/4") adapter, and silicone eartips (XS/S/M/L) Χαρακτηριστικά:Type: DynamicFrequency Response: 20 – 20,000 HzSensitivity: 107 dB/mWImpedance: 12 ohmsWeight: 10 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, silicone eartips (XS/S/M/L), 6.3 mm (1/4") adapter 

With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production, reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide variety of cameras and recording devices.The channel selection, instant timing and configuration to camera models make it extremely easy to use, while its digital wireless operating at 24-bit / 48 kHz brings ultimate sound quality and reliable performance in the band 2.4 Ghz, away from interference of DTV or 4G.The ATW-1701/P system includes an ATW-R1700 receiver, ATW-T1001 bodypack transmitter and an ATR35cW lapel microphone. There is also a complete handheld microphone system (ATW-1702) or the pocket transmitter without microphone (ATW-1701).Χαρακτηριστικά:24-bit / 48 kHz Digital wireless system, combining excellent sound quality and reliabilityFrequency range 2.4 GHz, operating outside of DTV or 4G bandsAutomatic Frequency Selection. Plug & Play. Ease of use and reliabilityOffers 3 levels of diversity (frequency, time and space) to ensure communication without interferenceUltra compact and lightweight receiver (105 g) with multiple mounting optionsExtremely easy to use, with channel selection, timing and instant setupOutput jacks balanced and unbalanced with selectable level control for use with most cameras and recording devices (3.5mm stereo mini jack output)Internal rechargeable battery with a life of 12 hoursIndependent headphone jack and volume control for local audio cueingAudio output attenuator on the receiver (0dB / 10dB / 20dB) for adjusting the sensitivityOmni lavalier microphone 

With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production, reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide variety of cameras and recording devices. The channel selection, instant timing and configuration to camera models make it extremely easy to use, while its digital wireless operating at 24-bit / 48 kHz brings ultimate sound quality and reliable performance in the band 2.4 Ghz, away from interference of DTV or 4G. The ATW-1702 system includes an ATW-R1700 receiver and an ATW-T1002 handheld dynamic cardioid microphone and transmitter. There is also a complete system (ATW-1701/P) with lavalier microphone or (ATW-1701) with just the bodypack transmitter and no microphone.Χαρακτηριστικά:24-bit / 48 kHz Digital wireless system, combining excellent sound quality and reliabilityFrequency range 2.4 GHz, operating outside of DTV or 4G bandsAutomatic Frequency Selection. Plug & Play. Ease of use and reliabilityOffers 3 levels of diversity (frequency, time and space) to ensure communication without interferenceUltra compact and lightweight receiver (105 g) with multiple mounting optionsExtremely easy to use, with channel selection, timing and instant setupOutput jacks balanced and unbalanced with selectable level control for use with most cameras and recording devices (3.5mm stereo mini jack output)Internal rechargeable battery with a life of 12 hoursIndependent headphone jack and volume control for local audio cueingAudio output attenuator on the receiver (0dB / 10dB / 20dB) for adjusting the sensitivity​​

With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone. The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders.Χαρακτηριστικά:Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphoneSelectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environmentHandles loud sound sources without distortionThree-position adjustable attenuator and switchable low-frequency roll-offIntegral rubber shock mounts isolate the microphone from vibration and mechanical camera noiseCompact, lightweight design with integral shoe mountRed/green LED power indicatorIncludes windscreen, fuzzy windscreen and AA battery