Audio Technica

Audio-Technica ATH-GL3The ATH-GL3 is a closed-back gaming headset designed around Audio-Technica’s hi-fi audio heritage rather than traditional “gaming headset” tuning. Instead of exaggerated bass and heavily processed sound, it focuses on clarity, positional imaging, and natural detail, making it suitable for competitive gaming, music, and media use alike. Its closed-back construction provides strong passive isolation, helping create a more immersive experience while reducing outside distractions.The design prioritizes lightweight comfort and long-session usability. At well under most gaming headset weights, the GL3 is intended for extended play without fatigue, while the detachable boom microphone and dual-cable setup make it flexible across PCs and consoles. Community feedback consistently highlights the comfort and clean sound presentation, though some users note the ear pads can feel slightly shallow depending on ear shape.Key Features:Closed-back high-fidelity gaming headsetLightweight over-ear design for long gaming sessions45 mm dynamic drivers for detailed audio reproductionDetachable hypercardioid boom microphoneIntegrated volume control and mic mute switchCompatible with PC, PlayStation, Xbox, Nintendo Switch, and mobile devicesIncludes detachable TRRS console cable and split PC cableTuned for positional audio and immersive gamingWired-only low-latency connectionMinimalist non-RGB design philosophy

Audio-Technica ATH-AWKGThe ATH-AWKG is an ultra-premium closed-back flagship headphone from Audio-Technica’s NARUKAMI series, built around rare Kurogaki wood housings and handcrafted Japanese construction. Kurogaki wood — a highly prized form of Japanese persimmon wood with natural black ink-like patterns — is used not just for aesthetics, but also for its acoustic properties and resonance control. Each housing is hand-finished with lacquer by skilled craftsmen, giving every unit a unique appearance that evolves visually over time. The entire design philosophy blends traditional Japanese artistry with modern high-end headphone engineering. The sound signature focuses on expansive staging, ultra-clean detail retrieval, and controlled, natural bass rather than exaggerated coloration. It uses large 53 mm drivers with highly efficient German Permendur magnetic circuitry, titanium flanges for rigidity and speed, and 6N-OFC voice coils for signal purity. Audio-Technica’s D.A.D.S. (Double Air Damping System) improves low-frequency control and extension while maintaining clarity and openness uncommon for closed-back designs. Community and press impressions consistently position it as one of Audio-Technica’s most technically refined wooden headphones ever produced. The construction and accessory package are unapologetically flagship-tier. Magnesium alloy support arms reduce weight while improving rigidity, and premium sheepskin materials are used for the headband and earpads. The headphone includes both balanced and single-ended detachable A2DC cables, plus a luxury wooden presentation/storage box finished with matching Kurogaki wood. It is hand-assembled in Tokyo as part of Audio-Technica’s highest-end audiophile lineup. Key Features:Flagship closed-back NARUKAMI-series audiophile headphoneRare Kurogaki wood housings with hand-applied lacquer finish53 mm custom dynamic driversGerman Permendur magnetic circuitryTitanium flange driver structure for rigidity and transient speedD.A.D.S. (Double Air Damping System) for bass control and extension6N-OFC high-purity copper voice coilsMagnesium alloy frame and support armsSheepskin leather earpads and headbandDetachable A2DC cable systemIncludes balanced XLR and single-ended 6.3 mm cablesHand-assembled in Tokyo, JapanIncludes premium wooden storage/presentation box

Audio-Technica ATH-WP900The ATH-WP900 is a premium portable closed-back headphone that combines Audio-Technica’s traditional wood craftsmanship with a fun, high-resolution sound signature. Its flame maple wooden housings are not only visually striking but also acoustically tuned to deliver a clean, lively presentation with rich bass and sparkling treble. Unlike many large audiophile headphones, the WP900 is specifically designed for portable listening, balancing high-end sound with lightweight comfort and easy drivability. The sound profile leans energetic and engaging rather than purely analytical. Large 53 mm drivers with DLC-coated diaphragms provide deep low-end extension and detailed upper frequencies, while the angled baffle design improves airflow and imaging. Community impressions consistently describe the WP900 as lightweight, comfortable, and highly enjoyable for everyday music listening, especially for listeners who prefer an immersive, dynamic presentation over strict neutrality. Key Features:Closed-back portable audiophile headphoneFlame maple wooden housings with handcrafted finish53 mm dynamic drivers with DLC-coated diaphragmsTuned for energetic, spacious, high-resolution playbackLightweight portable-focused designAngled baffle structure for improved airflow and imagingDetachable A2DC cable systemIncludes standard 3.5 mm and balanced 4.4 mm cablesFold-flat swivel mechanism for portabilityMade in Japan

The ATH-AWAS is a premium closed-back audiophile headphone built around natural wood acoustics and precision driver engineering. Its standout feature is the use of Asada cherry wood housings, chosen not just for aesthetics but for their acoustic properties—helping deliver a warm, natural tonal character with excellent clarity. This is part of Audio-Technica’s high-end “wood series,” where craftsmanship and material choice are just as important as technical performance. The sound design focuses on balanced, high-resolution playback with refined mids and controlled bass rather than exaggerated impact. A custom 53 mm driver with DLC coating and high-purity copper voice coils ensures detailed reproduction across the frequency range, while the double air damping system enhances low-frequency extension. It’s a headphone aimed at serious listening setups, especially for acoustic, vocal, and high-resolution audio content. Key Features:Closed-back “wood series” audiophile headphoneAsada cherry wood housings for natural acoustic tuning53 mm custom drivers with DLC-coated diaphragmDouble Air Damping System (D.A.D.S.) for enhanced bass controlHigh-purity 6N-OFC voice coils for signal accuracyDetachable A2DC cable system (balanced + unbalanced included)Magnesium alloy frame for rigidity and reduced weightSoft synthetic leather pads for comfort and sealMade in Japan with hand-finished constructionDesigned for high-resolution audio playback

The ATH-TWX7 is a premium true wireless earbud focused on high-quality sound, effective noise cancelling, and everyday usability in a compact form. It uses hybrid digital ANC with multiple microphones per earbud to actively reduce environmental noise, while maintaining a natural, balanced sound signature. With LDAC support, it targets higher-resolution wireless playback than typical consumer earbuds, making it more appealing for listeners who care about audio quality beyond basic Bluetooth performance. The feature set is designed around daily convenience, communication, and customization. It includes hear-through and talk-through modes for awareness, multipoint connectivity for switching between devices, and app-based personalization. Despite the small size, it offers a stable ergonomic fit and a wide set of lifestyle features like soundscape modes and customizable controls, positioning it as a well-rounded everyday premium earbud rather than a purely audiophile or sport-focused model. Key Features:True wireless in-ear design with premium compact form factorHybrid digital active noise cancelling (feedforward + feedback mics)LDAC high-resolution wireless audio supportHear-through (ambient) and talk-through modesMultipoint Bluetooth connection (2 devices simultaneously)Beamforming microphones for clearer callsApp support with EQ, control customization, and soundscape modesTouch + button hybrid controlsWireless charging (Qi) + USB-CErgonomic design for stable, long-term comfort

The ATH-CKS5TW is a true wireless earbud built around strong bass performance and unusually long battery life for its generation. Part of Audio-Technica’s SOLID BASS series, it uses a dual-layer diaphragm driver design to deliver heavy low-end impact while keeping mids and highs reasonably clear. It’s aimed at everyday listening—commuting, gym use, and casual music—rather than neutral or studio monitoring.The standout feature is its class-leading battery performance combined with stable wireless connectivity. With up to ~15 hours on a single charge and ~45 hours total with the case, it easily outlasts most competitors in its category. It also supports aptX and Qualcomm TrueWireless Stereo Plus for improved connection stability and lower latency, making it more reliable than many early TWS designs.Key Features:True wireless in-ear design (SOLID BASS tuning)Dual-layer diaphragm driver for enhanced low-end + clarityUp to ~15 hours playback (earbuds) / ~45 hours total with caseQualcomm TrueWireless Stereo Plus support (stable, low-latency connection)aptX / AAC / SBC codec supportPhysical multi-function buttons (music, calls, volume control)Auto power on/off via charging caseBuilt-in microphones with noise reduction (cVc)IPX2 splash resistanceApp support (Audio-Technica Connect)

The ATH-CKS30TW+ is a true wireless earbud focused on powerful bass and everyday convenience with modern ANC features. Part of Audio-Technica’s “SOLID BASS” lineup, it uses 9 mm drivers tuned for deep low-end impact while still maintaining a balanced overall sound. It’s designed for casual listening, commuting, and mobile use rather than strict studio accuracy, with multiple EQ presets to shape the sound depending on content.The feature set prioritizes flexibility and usability in a compact form factor. You get active noise cancelling alongside ambient/hear-through modes, plus app-based control and multipoint Bluetooth connectivity. The lightweight earbuds and very small charging case make it easy to carry daily, while IP-rated protection and solid battery life round out a practical, lifestyle-focused package. Key Features:True wireless in-ear design (SOLID BASS tuning)Active noise cancelling + ambient/hear-through modes9 mm dynamic drivers with enhanced low-end response5 selectable EQ presets via appMultipoint Bluetooth connection (2 devices)Compact, lightweight charging caseTouch controls + built-in microphonesIP55 water/dust resistance (earbuds)USB-C charging

The ATH-S300BT is a wireless noise-cancelling headphone focused on battery life, comfort, and everyday usability rather than pure audiophile tuning. It’s part of Audio-Technica’s “Street” series, meaning it leans toward lifestyle use—commuting, travel, and casual listening. The standout feature is its extremely long battery life, which can reach up to around 90 hours without noise cancelling, making it one of the longest-lasting headphones in its class. The sound and feature set prioritize convenience and practicality over advanced customization. You get hybrid active noise cancellation, a transparency (hear-through) mode, and voice assistant support, but without heavy app integration or advanced codec support. It’s designed to be simple, reliable, and comfortable for long sessions rather than highly tweakable or studio-accurate.Key Features:Wireless over-ear (circumaural) designHybrid active noise cancelling (ANC)Transparency / hear-through modeUp to ~90 hours battery life (ANC off)Fast charge: ~3 min = ~2.5 hours playbackBluetooth connectivity (SBC / AAC typical support)Built-in microphones for calls and ANCVoice assistant compatibility (Siri / Google)Foldable, lightweight portable designPhysical button controls (no touch interface)

The ATH-S300BT is a wireless noise-cancelling headphone focused on battery life, comfort, and everyday usability rather than pure audiophile tuning. It’s part of Audio-Technica’s “Street” series, meaning it leans toward lifestyle use—commuting, travel, and casual listening. The standout feature is its extremely long battery life, which can reach up to around 90 hours without noise cancelling, making it one of the longest-lasting headphones in its class. The sound and feature set prioritize convenience and practicality over advanced customization. You get hybrid active noise cancellation, a transparency (hear-through) mode, and voice assistant support, but without heavy app integration or advanced codec support. It’s designed to be simple, reliable, and comfortable for long sessions rather than highly tweakable or studio-accurate.Key Features:Wireless over-ear (circumaural) designHybrid active noise cancelling (ANC)Transparency / hear-through modeUp to ~90 hours battery life (ANC off)Fast charge: ~3 min = ~2.5 hours playbackBluetooth connectivity (SBC / AAC typical support)Built-in microphones for calls and ANCVoice assistant compatibility (Siri / Google)Foldable, lightweight portable designPhysical button controls (no touch interface)

The ATH-M50xSTS is a professional streaming headset that merges studio monitor headphones with broadcast-quality microphone performance. It’s built around the well-known M50x headphone platform, meaning you get accurate, punchy monitoring sound suitable for production, gaming, and content creation. Unlike typical gaming headsets, this one is clearly aimed at creators who care about audio quality rather than RGB or wireless gimmicks.The integrated condenser boom microphone is designed for clear, articulate voice capture with minimal background noise. Borrowing from Audio-Technica’s 20-series mic technology, it delivers a more natural vocal tone than most headset mics, with a flip-to-mute boom for practical workflow. Available in both XLR (for interfaces) and USB (plug-and-play with built-in DAC), it bridges the gap between studio gear and convenience.Key Features:Closed-back over-ear headset based on ATH-M50x design45 mm large-aperture drivers for detailed monitoringIntegrated cardioid condenser microphone (broadcast-style clarity)Flip-to-mute boom arm mechanismAvailable in XLR + 3.5 mm or USB versionsUSB version supports 24-bit / 96 kHz audioDetachable-style comfort design with swiveling earcupsLow-latency monitoring with sidetone (USB version)Built for streaming, podcasting, and content creationWired-only design for maximum stability and audio quality

The ATH-M50xSTS is a professional streaming headset that merges studio monitor headphones with broadcast-quality microphone performance. It’s built around the well-known M50x headphone platform, meaning you get accurate, punchy monitoring sound suitable for production, gaming, and content creation. Unlike typical gaming headsets, this one is clearly aimed at creators who care about audio quality rather than RGB or wireless gimmicks.The integrated condenser boom microphone is designed for clear, articulate voice capture with minimal background noise. Borrowing from Audio-Technica’s 20-series mic technology, it delivers a more natural vocal tone than most headset mics, with a flip-to-mute boom for practical workflow. Available in both XLR (for interfaces) and USB (plug-and-play with built-in DAC), it bridges the gap between studio gear and convenience.Key Features:Closed-back over-ear headset based on ATH-M50x design45 mm large-aperture drivers for detailed monitoringIntegrated cardioid condenser microphone (broadcast-style clarity)Flip-to-mute boom arm mechanismAvailable in XLR + 3.5 mm or USB versionsUSB version supports 24-bit / 96 kHz audioDetachable-style comfort design with swiveling earcupsLow-latency monitoring with sidetone (USB version)Built for streaming, podcasting, and content creationWired-only design for maximum stability and audio quality

18g TechniHard™ adjustable headshell with AT6101 quad wire Adjustable overhang and adjustable azimuth (tilt) Threaded headshell avoiding in use of nuts when fitting cartridge 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm) 1 hexagon wrench (for overhanging and tilt adjustment)

AT-PMA1The AT-PMA1 adapter enables T4P/P-mount cartridges to be used as half-inch mount cartridges. Compatible with the AT85EP, AT81CP, and other T4P/P-mount cartridges. Includes adapter screw and nut, and headshell mounting hardware.

AT-VMN95EBK0.3 x 0.7 mil elliptical replacement stylus for these cartridges:AT-VM95E

Replacement stylus for the Audio-Technica AT3600L cartridge.This elliptical bonded stylus makes it easy to upgrade the sound quality of any turntable equipped with an ATN3600L or ATN3600LC conical stylus, such as the turntables in our popular AT-LP60X series. Modeled after the venerable ATN3600L, which has sold by the millions and been trusted by countless music lovers for more than 50 years, the ATN3600LE features a 0.3 x 0.7 elliptical stylus for enhanced sound quality while remaining reliable and easy to use.

A new realm of analog soundAudio-Technica is pleased to introduce the AT-ART20, the latest cartridge in our ART Series that will allow you to experience a new world of sound. As with previous magnetic core cartridges in our high-end lineup, we had two main goals in developing the AT-ART20: provide superlative analog sound reproduction and optimize the performance and benefits of a magnetic core cartridge.The AT-ART20 has been designated an Audio-Technica Excellence Product, a recognition that identifies products that meet our highest standards of high-fidelity performance. Based on cartridge technologies and know-how cultivated over our long history, and employing the best materials and advanced processing techniques, we created a magnetic core moving coil cartridge that’s optimally structured to reproduce sound with the full expressiveness of the original recording.The high-frequency response of the AT-ART20 is extended and detailed, while the low-frequency sound, which cartridges tend to bury, is reproduced with full clarity and force. Vocals come through with all the variety and expressiveness of the human voice, even at low volumes, and, indeed, the full character of the sound source blossoms anew for the listener, with extended sound depth and rich spatial imaging to convey the original environment of the performance.Unprecedented, Emotional Sound QualityAll sonic details carefully and accurately reproducedUnparalleled expressive power to depict every tone and spaceAs a top-of-the-line MC cartridge, the AT-ART20 transmits an astonishing amount of information with high resolution, while capturing musical expression. The sound field stage is realistic, regardless of music genre, fully delivering the expressiveness of a performer's voice and the instrument’s original dynamic qualities.High-quality terminal pins with thick gold platingThe thickness of the gold-plated portion has been increased to approximately 30 times than that of conventional products to reduce contact resistance.Resonance suppression by combining various materialsThe cartridge construction consists of an aluminum base, titanium housing, and elastomer undercover. The unique combination of these materials minimizes resonance. Design That Expresses a Sense of Life and DynamismUtilizing Fukui Prefecture’s world-class technology in cartridgesPrecision-machined titanium with polished finishBy utilizing the advanced cutting and polishing technologies cultivated in the eyeglass industry of Sabae City, Fukui Prefecture, which has a history stretching back more than 100 years, Audio-Technica has realized an organic design with a beautifully curved surface that has never been seen in a cartridge before. The combination of this design and advanced cutting technology has also made it possible to reduce the thickness of the titanium, resulting in a significant weight reduction. Magnetic Core MC with a Superb SoundCartridge finished in JapanNewly designed magnetic circuit improves the cartridge’s efficiencyBased on the magnetic circuit of the AT-ART9XI, the front yoke is 0.6 mm (0.024″) thicker to improve magnetic flux density. By increasing the efficiency, more realistic sound quality is achieved. Output voltage is improved by more than 15% without increasing the number of coil turns which can increase mass and impedance.  Lighter and More Responsive with a New Stylus/Cantilever AssemblyStrengthened cantilever improves high-frequency characteristicsTip reinforcement plate made of titanium reduces stylus tip massAs in the flagship model of the ART Series, the AT-ART1000, titanium is used for the tip reinforcement plate that holds the diamond tip in place. This reduces its mass and improves the high-frequency characteristics.Special line contact stylus and 0.28 mm (0.011″) diameter solid boron cantileverA nude special line contact stylus is used to provide premium high-frequency response with minimal inner-groove distortion for consistent reproduction across the entire record. The special line contact shape also causes very little abrasion, resulting in long stylus life and low record wear.A rectangular shank mounts the stylus to the cantilever, ensuring precise alignment with the record groove and reducing mass to improve transient and frequency response (20 – 50,000 Hz).In addition, a stepped pipe structure is used, connecting the cantilever and armature increasing rigidity, which improves the strength of the cantilever and suppresses unwanted vibrations.Please Note: AT-ART20’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware.FeaturesVM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverParatoroidal coils improve generating efficiencyCenter shield plate between the left and right channels reduces crosstalkDurable low-resonance polymer housing

Audio-Technica AT-LPA2The AT-LPA2 is a high-mass, fully manual audiophile turntable designed around extreme vibration control and signal purity. Its standout feature is the thick transparent acrylic chassis, which is engineered to reduce unwanted resonance and let the cartridge track the groove with minimal coloration. With a belt-drive system and external motor control unit, the design physically separates vibration and electrical noise from the playback platform, prioritizing clarity and stability over convenience features.The tonearm and cartridge system is built for precision playback and high-end vinyl reproduction. It uses a carbon-fiber straight tonearm with full adjustability (VTA, azimuth, anti-skate, tracking force), paired with a high-quality moving coil cartridge for detailed, low-noise output. The external control box further isolates electronics from the platter assembly, reinforcing its focus on audiophile-grade performance rather than automation or lifestyle features.Key Features:Fully manual belt-drive audiophile turntableTransparent high-mass acrylic chassis for resonance controlExternal motor/control unit for vibration and noise isolationCarbon-fiber tonearm with full adjustabilityHigh-quality moving coil cartridge systemAcrylic platter with mat-free designExtremely low wow & flutter performanceNo built-in phono preamp (external required)RCA output with grounding terminalPremium isolation-focused construction for critical listening

Experience Pure Analog Warmth with Modern Precision – Audio-Technica AT-LPW40WN TurntableThe Audio-Technica AT-LPW40WN is a refined belt-drive turntable that combines classic vinyl playback with modern engineering, delivering rich, detailed sound and elegant design for any hi-fi setup. Built with carefully selected materials and precision components, it offers a natural listening experience that brings your record collection to life.Key Features:Fully Manual Belt-Drive Operation: Ensures accurate playback with reduced motor noise and enhanced sound quality.Anti-Resonance MDF Plinth: Simulated walnut wood finish minimizes vibrations while adding a premium aesthetic.Sensor-Controlled Motor: Maintains stable rotation at both 33⅓ and 45 RPM speeds.Carbon-Fiber Tonearm: Lightweight and rigid design improves tracking accuracy and reduces distortion.AT-VM95E Cartridge Included: High-quality moving magnet cartridge with elliptical stylus for clear, balanced audio.Switchable Built-in Phono Preamp: Connect directly to powered speakers or amplifiers with or without a phono input.Die-Cast Aluminum Platter: Provides consistent rotation and helps reduce unwanted resonance.Upgradeable Cartridge System: Compatible with the full VM95 stylus range for easy sound upgrades.

AT-LPW30TKThe AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.onSleek and Sophisticated Wooden TurntableFeaturing a plinth made from simulated teak veneer, the mid-century design of the LPW30TK makes it a perfect aesthetic addition to your home. The realistic wooden finish contrasts against the aluminium of the straight tonearm and professional anti-resonance, die-cast platter, for a striking and stylish design.With a built-in, selectable phono preamplifier, you can plug in and play without the need for extra equipment. Simply connect your LPW30TK turntable to your active home speakers using the detachable RCA audio cable provided (the red jack is for the right (R) channel and the white for the left (L) channel) and enjoy your vinyl in crystal clear high-fidelity audio.Sophisticated StylingHigh-Fidelity Audio Meets AestheticsThis fully-manual turntable combines sleek design with expertly engineered components. This includes the dynamic anti-skate control which can be adjusted to optimise channel balance, minimise feedback and distortion, allowing you to take control of your listening experience. While the sensor monitored motor delivers accurate platter rotation for high-fidelity sound.The ideal companion for your record collection, the LPW30TK features two speeds for 33 1/3 and 45 RPM records, so you can spend hours sifting through and playing your favourite vinyl. To get started, set the adjustable tracking force and balance the tonearm — this will minimise distortion and deliver maximum performance — and get ready to experience warm, rich audio reproduction without fuss.

AT-LP70XBTThe AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.Replaceable / Upgradable AT-VM95 Series StyliThe turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

AT-LP3XBT Black automatic turntable with Bluetooth 5.2 transmitter from Audio-Technica. It features a mechanical tonearm lift (up/down), playback speeds of 33/45 RPM, a built-in phono-to-line preamp, an aluminum platter, AT-VM95C cartridge, dust cover, and felt mat. Dimensions: 435.6 × 128 × 374 mm.

T-LP3XBT Black automatic turntable with Bluetooth 5.2 transmitter from Audio-Technica. It features a mechanical tonearm lift (up/down), playback speeds of 33/45 RPM, a built-in phono-to-line preamp, an aluminum platter, AT-VM95C cartridge, dust cover, and felt mat. Dimensions: 435.6 × 128 × 374 mm.

Replacement rubber belt for AT-LP60X and AT-LP3 turntables. 700 mm (total length) x 4 mm width and 0.6 mm thickness.Compatible with the following turntable models:AT-LP60XBT (all colours)AT-LP60XUSB (all colours)AT-LP60X (all colours)AT-LP60 (all colours)AT-LP3 (all colours)AT-LP3XBT (all colours)AT-LP2XAT-PL50

The AT-HS6 is a universal ½"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell comes with color-coded lead wires and mounting screws.  

Audio-Technica took 2.4 GHz wireless microphone systems to a new level of functionality and convenience with the System 10 PRO rack-mount receiver. Now, with the System 20 PRO they've taken it even further, offering a self-managing, plug-and-play 2.4 GHz system that's scalable to 20 channels and delivers the same dependable, high-quality audio - regardless of where you set it up. Designed for hassle-free deployment, the system overcomes many challenges of conventional wireless microphones, such as frequency coordination, complex intermodulation calculations, and remote antenna cabling.

ATH-SQ1TW2Smaller and lighter than the ATH-SQ1TW – yet every bit as fun – the next-generation ATH-SQ1TW2 wireless earbuds offer enhanced performance for a more versatile and convenient listening experience.The ATH-SQ1TW2 earbuds feature exclusive 5.8 mm drivers for powerful low frequencies and extended mid-to-high frequencies. They also offer multipoint pairing that allows you to stay connected to two devices at once – so you don’t have to worry about missing calls on your smartphone while listening to music on your computer.Speaking of calls, the earbuds deliver crystal-clear audio whether you’re using one earbud or two. Optimally placed and tuned microphones help to suppress ambient noise, including wind noise, so you can talk comfortably indoors or out. Using the Audio-Technica Connect app, you can even employ a sidetone function to hear your own voice during calls for more natural-sounding conversations.When you’re out and about, the easily accessible ambient control functions let you stay in touch with the sounds around you, with a hear-through function for continual ambient awareness and a talk-through function for tuning in and out of your surroundings as you desire.The ATH-SQ1TW2 earbuds provide 6.5 hours of continual playback on a full charge, plus an additional 13.5 hours from the charging case. Compatible with Qi wireless charging, the charging case features transparent cutouts on the lid for easy viewing of the earbuds inside.These playfully designed square earbuds are available in four colours – Jet Black, Pure White, Navy/Red, and Forest Green – and come with four sizes of soft silicone eartips (XS, S, M, and L) to ensure a comfortable, secure fit in anyone’s ears. They are even water-washable (IPX5*-equivalent rating) for enhanced cleanliness.

ATH-SQ1TW2Smaller and lighter than the ATH-SQ1TW – yet every bit as fun – the next-generation ATH-SQ1TW2 wireless earbuds offer enhanced performance for a more versatile and convenient listening experience.The ATH-SQ1TW2 earbuds feature exclusive 5.8 mm drivers for powerful low frequencies and extended mid-to-high frequencies. They also offer multipoint pairing that allows you to stay connected to two devices at once – so you don’t have to worry about missing calls on your smartphone while listening to music on your computer.Speaking of calls, the earbuds deliver crystal-clear audio whether you’re using one earbud or two. Optimally placed and tuned microphones help to suppress ambient noise, including wind noise, so you can talk comfortably indoors or out. Using the Audio-Technica Connect app, you can even employ a sidetone function to hear your own voice during calls for more natural-sounding conversations.When you’re out and about, the easily accessible ambient control functions let you stay in touch with the sounds around you, with a hear-through function for continual ambient awareness and a talk-through function for tuning in and out of your surroundings as you desire.The ATH-SQ1TW2 earbuds provide 6.5 hours of continual playback on a full charge, plus an additional 13.5 hours from the charging case. Compatible with Qi wireless charging, the charging case features transparent cutouts on the lid for easy viewing of the earbuds inside.These playfully designed square earbuds are available in four colours – Jet Black, Pure White, Navy/Red, and Forest Green – and come with four sizes of soft silicone eartips (XS, S, M, and L) to ensure a comfortable, secure fit in anyone’s ears. They are even water-washable (IPX5*-equivalent rating) for enhanced cleanliness.

ATH-SQ1TW2Smaller and lighter than the ATH-SQ1TW – yet every bit as fun – the next-generation ATH-SQ1TW2 wireless earbuds offer enhanced performance for a more versatile and convenient listening experience.The ATH-SQ1TW2 earbuds feature exclusive 5.8 mm drivers for powerful low frequencies and extended mid-to-high frequencies. They also offer multipoint pairing that allows you to stay connected to two devices at once – so you don’t have to worry about missing calls on your smartphone while listening to music on your computer.Speaking of calls, the earbuds deliver crystal-clear audio whether you’re using one earbud or two. Optimally placed and tuned microphones help to suppress ambient noise, including wind noise, so you can talk comfortably indoors or out. Using the Audio-Technica Connect app, you can even employ a sidetone function to hear your own voice during calls for more natural-sounding conversations.When you’re out and about, the easily accessible ambient control functions let you stay in touch with the sounds around you, with a hear-through function for continual ambient awareness and a talk-through function for tuning in and out of your surroundings as you desire.The ATH-SQ1TW2 earbuds provide 6.5 hours of continual playback on a full charge, plus an additional 13.5 hours from the charging case. Compatible with Qi wireless charging, the charging case features transparent cutouts on the lid for easy viewing of the earbuds inside.These playfully designed square earbuds are available in four colours – Jet Black, Pure White, Navy/Red, and Forest Green – and come with four sizes of soft silicone eartips (XS, S, M, and L) to ensure a comfortable, secure fit in anyone’s ears. They are even water-washable (IPX5*-equivalent rating) for enhanced cleanliness.

ATH-SQ1TW2Smaller and lighter than the ATH-SQ1TW – yet every bit as fun – the next-generation ATH-SQ1TW2 wireless earbuds offer enhanced performance for a more versatile and convenient listening experience.The ATH-SQ1TW2 earbuds feature exclusive 5.8 mm drivers for powerful low frequencies and extended mid-to-high frequencies. They also offer multipoint pairing that allows you to stay connected to two devices at once – so you don’t have to worry about missing calls on your smartphone while listening to music on your computer.Speaking of calls, the earbuds deliver crystal-clear audio whether you’re using one earbud or two. Optimally placed and tuned microphones help to suppress ambient noise, including wind noise, so you can talk comfortably indoors or out. Using the Audio-Technica Connect app, you can even employ a sidetone function to hear your own voice during calls for more natural-sounding conversations.When you’re out and about, the easily accessible ambient control functions let you stay in touch with the sounds around you, with a hear-through function for continual ambient awareness and a talk-through function for tuning in and out of your surroundings as you desire.The ATH-SQ1TW2 earbuds provide 6.5 hours of continual playback on a full charge, plus an additional 13.5 hours from the charging case. Compatible with Qi wireless charging, the charging case features transparent cutouts on the lid for easy viewing of the earbuds inside.These playfully designed square earbuds are available in four colours – Jet Black, Pure White, Navy/Red, and Forest Green – and come with four sizes of soft silicone eartips (XS, S, M, and L) to ensure a comfortable, secure fit in anyone’s ears. They are even water-washable (IPX5*-equivalent rating) for enhanced cleanliness.

The AT2040 features a multi-layer windscreen with a non-woven filter and high-quality foam mesh that provides exceptional filtering. The built-in shock mount prevents unwanted noise and vibrations that can pass through even the best tripods and arms. The large diaphragm of this microphone offers smooth, natural sound, regardless of the application. The special internal windscreen, combined with the supercardioid polar pattern, results in exceptional directionality, reducing external noise while producing a warm, classic sound. The AT2040 podcast microphone facilitates recording of individual or dual vocals while in the same room, so even when using two microphones for recording a podcast for two people, users will enjoy exceptional sound capture.

Professional Wireless In-Ear Monitoring with Unmatched Clarity – Audio-Technica ATW-3255 DF2The Audio-Technica ATW-3255 DF2 is a premium UHF wireless in-ear monitoring system engineered for live performers, engineers, and musicians who demand crystal-clear sound, rock-solid RF performance, and flexible configuration. Designed as part of Audio-Technica’s acclaimed 3000 Series, it offers pristine stereo audio, network control, and the reliability professionals expect on any stage.Key Features:DF2 Frequency Band (470.125 – 607.875 MHz): Wide 138 MHz tuning range for maximum channel flexibility.Up to 49 Simultaneous Channels: Ideal for complex multi-performer setups.Stereo or Mono Operation: With personal mix and pan controls directly on the receiver.True Diversity Receiver: Dual antenna design ensures stable, drop-free performance.Rugged Half-Rack Transmitter (ATW-T3205): Metal chassis, OLED display, and intuitive front-panel controls.Compact Bodypack Receiver (ATW-R3250): Lightweight and ergonomic with clear OLED screen.Network Control: RJ-45 port enables remote monitoring and management via Wireless Manager software.High-Quality Audio: 40 Hz–14 kHz frequency response with < 0.2% total harmonic distortion.Selectable RF Power: Choose between 10 mW (low) or 50 mW (high) output for optimal range.Long Battery Life: Up to 7 hours continuous operation using rechargeable AA NiMH batteries.Comprehensive Bundle: Includes ATH-E40 in-ear monitors, rack ears, power adapter, and antenna.

The ATR6250x provides extremely affordable, high-quality stereo pickup in a single microphone. Its compact design is ideal for use with cameras and audio recorders. The microphone comes with two cables: a 0.2 m (8") camera cable (3.5 mm stereo to 3.5 mm stereo); and a 3 m (9.8') recording cable (3.5 mm stereo to dual 3.5 mm mono). The ATR6250x also includes a professional camera shoe mount, interchangeable mic-stand base, foam windscreen, two 6.3 mm (1/4") mono adapters, and AA battery

Power and FlexibilityThe Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models.Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets you set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.Available system configurations feature an ATW-R3210 receiver or an ATW-R3210N network-enabled receiver along with an ATW-T3201 body-pack or ATW-T3202 handheld transmitter. The ATW-T3201 is equipped with Audio-Technica's new rugged cH-style screw-down 4-pin connector for secure connection to A-T's cH-style lavalier and headworn microphones, or cables. The ATW-T3202 comes with either an ATW-C510 dynamic or ATW-C710 condenser interchangeable cardioid capsule, and its industry-standard thread allows for the use of four additional A-T capsules, plus other compatible capsules. Both transmitters feature rugged, metal housings and are powered by two AA batteries. Charging terminals on each transmitter work with the ATW-CHG3 and ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries.3000 Series network-enabled systems offer the same features and configurations as the standard systems along with network monitoring and control via Audio-Technica’s Wireless Manager software. Each network-enabled receiver also comes with an AT8631 joining plate.

AT-LP8XAudio-Technica expands its line of direct-drive turntables with the semi-automatic AT-LP8X, featuring a newly designed tonearm lift that automatically raises the tonearm at the end of a record side and stops the motor.The turntable’s J-shaped aluminium tonearm, inspired by classic A-T models of the 1960s and ’70s, comes equipped with a newly designed AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. For easy customization, the stylus can be replaced or interchanged with any of the five additional styli in the VM95 line, and the tonearm’s VTA (vertical tracking angle) adjustment and subcounterweight enable the use of a broad range of other cartridges.The AT-LP8X plays 33-1/3, 45, and 78 RPM records. Its 25 mm rubber-damped, anti-resonance, die-cast aluminium platter comes with a 2.5 mm rubber mat and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed. The motor and its efficient internal switching power supply are housed within a box plinth constructed of MDF (medium density fiberboard) and equipped with height-adjustable feet for excellent protection against unwanted noise and vibration.The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover.  FeaturesSemi-automatic direct-drive turntable with three speeds: 33-1/3, 45, 78 RPMMotor features a speed-sensor system to maintain accurate platter rotation speedNewly designed low-torque, direct-drive DC servo motor improves wow and flutter performance25 mm rubber-damped, anti-resonance, die-cast aluminium platter with 2.5 mm rubber matJ-shaped tonearm with adjustable VTA (vertical tracking angle)Newly designed tonearm lift automatically raises the tonearm at the end of a record side and stops the motorAT-VM95E BK (black) cartridge (0.3 x 0.7 mil elliptical stylus) is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and applicationNewly designed lightweight AT-LT10 headshellIncluded subcounterweight provides an expanded cartridge/headshell weight range of 14.0 g – 23.5 gNewly designed internal switching power supply, optimised for audio performanceMDF (medium density fiberboard) cabinet constructionPhono-level output provides pure, direct transmission of the cartridge’s signalIncludes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover

Audio Technica AT8458A.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsCompatible with 3/8"-16 and 5/8"-27 threaded stands

AT-LP70XBTThe AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.Replaceable / Upgradable AT-VM95 Series StyliThe turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

AT6006RLifts tonearm automatically at the end of a record, protecting stylus tipHydraulic lift with rubber lift bar operates safely and smoothlyCan be mounted on a variety of turntables with different tonearm heights

AT617aSpecially formulated polyurethane gel gently removes dirt particles from stylus tipGel remains tacky for yearsSurface is washable for repeated use

Color-coded lead wires for connecting a phono cartridge to a headshell. 6N-OFCC 99.9999% high-purity oxygen-free copper; 0.12 mm x 29 core strand construction.

AT6011aRemoves harmful dust and contaminants from your vinyl recordsConductive synthetic fibers help to dissipate staticProlongs the life of records and styli

10g Magnesium Body HeadshellThreaded headshell avoiding in use of nuts when fitting cartridge7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)Includes gold plated terminals quad wire

AT-LT13A13g die cast aluminium body headshell

A 15g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH15/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

10g DJ Style 1/2”-Mount Cartridge Headshell13g TechniHard™ adjustable headshell with AT6101 quad wireAdjustable overhang and adjustable azimuth (tilt)Threaded headshell avoiding in use of nuts when fitting cartridge7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)1 hexagon wrench (for overhanging and tilt adjustment)