MENU
Αναζήτηση
Filters
Following extensive research, at the end of 1996 we were most proud to introduce the world’s first metal free loudspeaker cable named The THIRD ®: a logical follow-up to our highly acclaimed Linear Structured Carbon ® technology The FIRST ®(unbalanced) and The SECOND ® (balanced) interlink cables.The THIRD ® Mk II is a single lead loudspeaker cable in which the full potential of not less than 3.5 million individually insulated Linear Structured Carbon ® (LSC) fibers is utilised to achieve a unique COMBINATION of highly sophisticated audiophile qualities NOT FOUND in any metal-based loudspeaker cable:The THIRD ® Mk II does NOT age; Its LSC conductors are TOTALLY IMMUNE to mechanical or chemical degradation, therefore its sonic properties DO NOT CHANGE: this regardless of how often this relatively FLEXIBLE cable is bent and irrespective of the presence of any corrosive chemical compounds in the air that normally would gradually attack any inadequately protected metal cable.As opposed to the immense number of metal crystal boundaries an audio signal needs to overcome in metal conductors, The THIRD ® Mk II does not exhibit the related cross-crystal and cross-strand-current-hopping distortion effects since all of its LSC fibers exhibit a SINGLE CRYSTAL structure from cable-end to cable-end and since all LSC fibers are individually insulated.The THIRD ® Mk II's matt light-beige jacket is made of our durable HULLIFLEX ® 4 (halogen free) material and has a diameter of 18.4 mm.*Price is for stereo pair,terminated TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:Linear Structured Carbon ®Design Purpose/Application Area(s):Highest quality level full-range loudspeaker cable / Bi-wire line to tweeter-midrange section.Eff. Conductor Ø/Eq. AWG No./Strands:- / - / 3,500,000External Diameter /-Dimensions:18.4 mm.Resistance 20 °C / 68 °F:~ 0.07 Ohm/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 4 / 300 Vrms min.
Following extensive research, at the end of 1996 we were most proud to introduce the world’s first metal free loudspeaker cable named The THIRD ®: a logical follow-up to our highly acclaimed Linear Structured Carbon ® technology The FIRST ®(unbalanced) and The SECOND ® (balanced) interlink cables.The THIRD ® Mk II is a single lead loudspeaker cable in which the full potential of not less than 3.5 million individually insulated Linear Structured Carbon ® (LSC) fibers is utilised to achieve a unique COMBINATION of highly sophisticated audiophile qualities NOT FOUND in any metal-based loudspeaker cable:The THIRD ® Mk II does NOT age; Its LSC conductors are TOTALLY IMMUNE to mechanical or chemical degradation, therefore its sonic properties DO NOT CHANGE: this regardless of how often this relatively FLEXIBLE cable is bent and irrespective of the presence of any corrosive chemical compounds in the air that normally would gradually attack any inadequately protected metal cable.As opposed to the immense number of metal crystal boundaries an audio signal needs to overcome in metal conductors, The THIRD ® Mk II does not exhibit the related cross-crystal and cross-strand-current-hopping distortion effects since all of its LSC fibers exhibit a SINGLE CRYSTAL structure from cable-end to cable-end and since all LSC fibers are individually insulated.The THIRD ® Mk II's matt light-beige jacket is made of our durable HULLIFLEX ® 4 (halogen free) material and has a diameter of 18.4 mm.*Price is for stereo pair,terminated TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:Linear Structured Carbon ®Design Purpose/Application Area(s):Highest quality level full-range loudspeaker cable / Bi-wire line to tweeter-midrange section.Eff. Conductor Ø/Eq. AWG No./Strands:- / - / 3,500,000External Diameter /-Dimensions:18.4 mm.Resistance 20 °C / 68 °F:~ 0.07 Ohm/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 4 / 300 Vrms min.
Following extensive research, at the end of 1996 we were most proud to introduce the world’s first metal free loudspeaker cable named The THIRD ®: a logical follow-up to our highly acclaimed Linear Structured Carbon ® technology The FIRST ®(unbalanced) and The SECOND ® (balanced) interlink cables.The THIRD ® Mk II is a single lead loudspeaker cable in which the full potential of not less than 3.5 million individually insulated Linear Structured Carbon ® (LSC) fibers is utilised to achieve a unique COMBINATION of highly sophisticated audiophile qualities NOT FOUND in any metal-based loudspeaker cable:The THIRD ® Mk II does NOT age; Its LSC conductors are TOTALLY IMMUNE to mechanical or chemical degradation, therefore its sonic properties DO NOT CHANGE: this regardless of how often this relatively FLEXIBLE cable is bent and irrespective of the presence of any corrosive chemical compounds in the air that normally would gradually attack any inadequately protected metal cable.As opposed to the immense number of metal crystal boundaries an audio signal needs to overcome in metal conductors, The THIRD ® Mk II does not exhibit the related cross-crystal and cross-strand-current-hopping distortion effects since all of its LSC fibers exhibit a SINGLE CRYSTAL structure from cable-end to cable-end and since all LSC fibers are individually insulated.The THIRD ® Mk II's matt light-beige jacket is made of our durable HULLIFLEX ® 4 (halogen free) material and has a diameter of 18.4 mm.*Price is for stereo pair,terminated TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:Linear Structured Carbon ®Design Purpose/Application Area(s):Highest quality level full-range loudspeaker cable / Bi-wire line to tweeter-midrange section.Eff. Conductor Ø/Eq. AWG No./Strands:- / - / 3,500,000External Diameter /-Dimensions:18.4 mm.Resistance 20 °C / 68 °F:~ 0.07 Ohm/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 4 / 300 Vrms min.
Following extensive research, at the end of 1996 we were most proud to introduce the world’s first metal free loudspeaker cable named The THIRD ®: a logical follow-up to our highly acclaimed Linear Structured Carbon ® technology The FIRST ®(unbalanced) and The SECOND ® (balanced) interlink cables.The THIRD ® Mk II is a single lead loudspeaker cable in which the full potential of not less than 3.5 million individually insulated Linear Structured Carbon ® (LSC) fibers is utilised to achieve a unique COMBINATION of highly sophisticated audiophile qualities NOT FOUND in any metal-based loudspeaker cable:The THIRD ® Mk II does NOT age; Its LSC conductors are TOTALLY IMMUNE to mechanical or chemical degradation, therefore its sonic properties DO NOT CHANGE: this regardless of how often this relatively FLEXIBLE cable is bent and irrespective of the presence of any corrosive chemical compounds in the air that normally would gradually attack any inadequately protected metal cable.As opposed to the immense number of metal crystal boundaries an audio signal needs to overcome in metal conductors, The THIRD ® Mk II does not exhibit the related cross-crystal and cross-strand-current-hopping distortion effects since all of its LSC fibers exhibit a SINGLE CRYSTAL structure from cable-end to cable-end and since all LSC fibers are individually insulated.The THIRD ® Mk II's matt light-beige jacket is made of our durable HULLIFLEX ® 4 (halogen free) material and has a diameter of 18.4 mm.*Price is for stereo pair,terminated TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:Linear Structured Carbon ®Design Purpose/Application Area(s):Highest quality level full-range loudspeaker cable / Bi-wire line to tweeter-midrange section.Eff. Conductor Ø/Eq. AWG No./Strands:- / - / 3,500,000External Diameter /-Dimensions:18.4 mm.Resistance 20 °C / 68 °F:~ 0.07 Ohm/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 4 / 300 Vrms min.
The SCS - 4 comes very close to the sonic qualities of the SCS - 2. The size is 4 gauge with 133 strands and a total conductor cross-section area of 21.6 mm².The external diameter is 8.10 mm.The resistance is a remarkably low 0.80 Ohm/km.Each strand is made of a very high grade Matched Crystal (MC) OFC with a dense and very pure silver coating in an extrusion process.The jacket of the SCS - 4 is made of beige PTFE with “ van den Hul SCS - 4 ” printing in brown colour. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:21.6 mm² / ~AWG 4 / 133External Diameter /-Dimensions:8.10 mm.Resistance 20 °C / 68 °F:0.80 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms
The GOLDWATER is especially intended for use as a twin line loudspeaker cable in areas with an increased corrosion activity such as industrial, coastal and humid tropical areas. Due to its maximum corrosion protection The GOLDWATER is excellently suited for use in permanent professional, commercial and industrial distribution setups such as church sound systems and shopping mall, airport and alike music distribution systems as well as in car hi-fi applications.Both leads each consist of 98 high purity dense Silver coated high purity Matched Crystal OFC strands with an effective cross-section area of 1.97 mm² closely approaching AWG 14. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:16.6 mm. wide; 5.0 mm. thickResistance 20 °C / 68 °F:0.9 Ohm/100 m.Capacitance:22 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® / 300 Vrms min.
The SNOWLINE is made of 2 conductor groups, each with 98 x 0.16 mm. strands. The total cross-section area per conductor is 1.97 mm²; close to AWG 14. The conductor material is a very high grade large crystal OFC with a dense pure silver coating. The resistance per lead is 0.88 Ohm/100 meter. The external dimensions are 8.5 x 3.4 mm. The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. The two conductors have different insulator shapes: one is round and the other has two edges with type printing on the flat surface: the most simple polarity finder you can think of. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity OFCDesign Purpose/Application Area(s):Loudspeaker cable / Car and general hi-fi applicationsEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.88 Ohm/100 m.Capacitance:69 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
This twin lead loudspeaker cable is the twin version of the CS - 12 HF. Main aim is to provide a high quality flat twin lead cable at a low price.The 2 conductors are made of 147 strands of 0.16 mm. diameter high purity Matched Crystal OFC with a very dense pure silver coating. Each conductor exhibits a cross-section area of 2.96 mm², equalling AWG 12.5.Covering the two conductors you find an extra Linear Structured Carbon ® saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again.The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.The insulation of the plus and minus leads is different in shape with printing in the flat middle section. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.96 mm² / AWG 12.5 / 147)External Diameter /-Dimensions:16.5 mm. wide; 6.0 mm. thickResistance 20 °C / 68 °F:0.58 Ohm/100 m.Capacitance:32 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min.
The SKYLINE HYBRID is an elegant small twin conductor loudspeaker cable with outstanding qualities.Each lead combines 19 high purity Oxygen Free Copper strands with a coating containing our Linear Structured Carbon ®This combination of metal and carbon (hybrid technology) has excellent properties when it comes to resolution and neutrality, and therefore is standard applied in all of our heavier loudspeaker cables. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity OFC + Linear Structured Carbon ®saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.04 mm² / ~AWG 14 / 19)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.84 Ohm/100 m.Capacitance:46 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
The SW 1000 Be subwoofer is the redesigned version of the Electra Be subwoofer to ensure compatibility with the other loudspeakers in the Sopra line.It is equipped with a 13" (33cm) "W" cone speaker driver (high rigidity for no distortion, even at high volumes), a high-power 600 W RMS BASH® amplifier and a front laminar port (no dynamic bass compression).The 24-bit digital processor (DSP) offers a large control panel with settings for adapting the sub to various listening rooms. The SW 1000 Be offers very high performance with a bass cut-off frequency of 18 Hz and an SPL of 118 dB.Several SW 1000 Be subwoofers can be linked up. ΤECHNICAL SPECIFICATIONS: TypeActive bass-reflex subwoofer. Standard finishesBasalt - Champagne - Slate Grey On demand finishesOther finishes subject to estimate Drivers33cm woofer Frequency response (+or-3dB)20Hz - 150Hz Low frequency point18Hz Recommended amplifier power600W (750W max.) BASH® amplifier. Subwoofer featuresAdjustable LPF: 50Hz to 150Hz (24dB/oct.), 48dB/oct. adjustable subsonic filter, adjustable phase, Boost mode, Night mode, 3 user memories, LFe/Stereo/Digital enter. Dimensions (HxWxD)21-1/16x19-11/16x17" Net weight92.4Ibs (42kg)
The Zx5 is rated for 600-watt, long-term power handling and is able to produce high SPLs while providing a very smooth frequency response. With two available coverage patterns (60 degree x 60 degree or 90 degree x 50 degree), two adjustable monitor angles (45 degrees or 55 degrees) and ten built-in rigging and suspension points allow for a variety of mounting accessories, the Zx5 fits a variety of applications such as installations of individual speakers or clusters in entertainment, houses-of-worship, as well as on stage with bands, musicians, and PA rental companies.
Violin holder for DPA 4099 microphone, black
Sax and Trumpet holder for DPA 4099 microphone, black
Supplied with Audio-Technica's versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.Features:Low-profile design for minimum visibilityUniMount® clip permits accurate positioning, provides shock resistance and protects elementUnique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpieceCrisp, clear, well-balanced response, even at high SPLsCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceInterchangeable elements available for hypercardioid and omnidirectional polar patternsCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free use Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 122 dB, 1 kHz at Max SPLSignal to Noise Ratio: 67 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.5 mA typicalSwitch: Flat, roll-offCable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connectorAccessories: AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch
The Electro-Voice® ZX1 is a high-performance, compact loudspeaker with a lightweight, durable, high-tech enclosure. The ZX1's enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low-frequency response without vent noise. The ZX1’s long excursion, high-output, eight-inch woofer with weather-treated cone delivers smooth, low-frequency performance with exceptional reliability.
The M64 is a flexible MADI interface, router, repeater, splitter, converter and mixer with AVB/TSN networking. It is ideal for routing MADI digital audio streams in live performance systems, network installations or recording studios of any size.High-performance computer connectivityNew, optimized drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW such as Digital Performer, the M64 delivers an astonishing round trip latency (RTL) of 1.70 ms (milliseconds) on OS X and 1.71 ms on Windows over USB (at 96 kHz with a 32-sample host buffer). DSP mixing and effects processingThe M64's 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects, including classic reverb, EQ modeled after British analog console EQs and compression modeled after the legendary LA-2A compressor. If you know your way around a large-format mixing console, you'll feel right at home. With 32-bit floating point processing, the M64's DSP engine delivers virtually unlimited headroom and the utmost in sound quality.Stand-alone operation with wireless controlConnect an Apple® Airport™orother Wi-Fi router with a standard Ethernet cable for wireless control of device settings, powerful 48-channel mixing and DSP effects.Web app controlThe software that you use to control the M64 doesn't reside on your hard drive. It's a web app served from the hardware itself. This means you can control the M64'son-board DSP, mixing, and device settings from the web app software running in your favorite web browser on the computer, or even a tablet or smartphone on the same Wi-Fi network as your computer.Mix and match with other MOTU gearAn included mounting bracket kit joins the M64 side-by-side with any other MOTU half-rack unit to create a single rack-space configuration consisting of customized analog, digital and/or MIDI I/O configuration tailored just for you.Audio analysis toolsAnalyze and scope your audio with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram "water- fall" display, full-featured oscillioscope , X-Y plot and phase analyzer.Specifications:Computer Connectivity: USB, EthernetForm Factor: DesktopDigital Inputs: 1 x BNC Coax (MADI), 1 x Optical (MADI)Digital Outputs: 2 x BNC Coax (MADI), 1 x Optical (MADI)Data I/O: 1 x Ethernet (AVB)Headphones: 1 x 1/4"USB: 1 x Type BClock I/O: In/OutPower Supply: 15V DC power supply (included)
Acoustic Guitar Case by JM Forest , 41' 12mm.
DAW system front end / simple 8X2 USB interface / remote recording / high-end sound reinforcementFrom 25 years experience of creating acclaimed professional audio products, comes the latest evolution of our mic preamplifier design: the m108. With eight channels of our transparent, musical mic preamplification, state of the art A/D conversion, multiple digital output formats, and flexible local or remote controlled operation, the m108 is a vital addition to any modern audio production environment.Unrivaled PerformanceBased on the acclaimed success of our m802 remote controlled mic preamplifier, the m108 distills the best of these achievements into a sleek, elegant 1U chassis design. Our transformerless, transipedance mic preamp design is unmatched in its ability to effortlessly resolve complex sonic waveforms, resulting in recordings of amazing clarity and depth. Integrated A/D conversion delivers digital signals to the workstation that are pure and beautiful. Latest generation s-Lock PLL ensures pristine, jitter free sample clock when clocking from external word clock or Dante clock. And an asynchronous mode USB interface provides the best possible jitter performance when connected to a computer.Simple OperationA push-button rotary encoder is used for navigating and operation, with a user interface that is simple and intuitive. Dedicated push-buttons are assigned to core functions: 48V phantom power, phase reverse, channel grouping and meter peak clear. A crisp OLED screen displays complete system information, including channel gain settings, metering, peak status, and the system setup menu.Out of the box, the m108 is ready to go as a stand alone mic preamp / ADC. With integrated serial or MIDI control, the m108 can be confi gured in large channel-count remote systems, with control from our existing m802 hardware remote control unit, from Protools™, or our forthcoming m108 control computer utility. And an optional DANTE™ interface is provided for network audio configurations. The m108 control protocol is backward compatible with the m802 so you can add m108’s to an existing m802 system. 8 channels of balanced analog preamp outputs8 channels of transparent, musical mic preampli erWide gain range: -8 to 74dBRibbon mic mode8 channels of 192kHz ADC outputs via AES, ADAT and USB Class 2 / External Word clock in and outReference DAC and headphone ampli er for low-latency monitoring of channel pairs or USB playback from a computerChannel 1 & 2 HI-Z inputs on front panelHigh contrast, wide viewing angle OLED display for all system parameters and setup menuCombination RS 485/422 serial / MIDI ports for control from existing m802 RCU or Protools™RJ45 Ethernet port for network controlExpansion slot for optional Audinate / DANTE™ network audio cardCooling fan for reliable operation in the harshest environmentsBuilt in 100-240VAC universal AC power supply5 year transferrable warrantyMade in the USA
If you take a condenser capsule that has been optimised for vocals and instrument and then build an audio chipset into the mic’s electronics, the end product is a studio mic that behaves like a separate audio input, but retains the level of sensitivity, resolution and accuracy you would expect from a studio mic.Unlike other USB microphones on the market, the ST-USB is shipped with an ASIO driver letting you use it in all your ASIO software, and not only in a basic multimedia environment.Specifications:Element: High Quality Condenser CapsulePolar Pattern: Uni-directionalFrequency Response: 20Hz-20kHzSensitivity: -35dB(0dB=1V/Pa at 1kHz)Max.Input SPL: 135dB(at 1kHz 1% T.H.D)Sampling : 44,1 & 48Khz (16 bits)
Whether you're recording in the studio, taking direct output feeds off of an analog mixer, or capturing audio onstage, the MOTU 24Ai USB 2.0 audio interface gives you the high channel count and low latency you need. Like the rest of MOTU's popular AVB-equipped audio interfaces, the 24Ai lets you send a ton of audio across a standard network. The internal mixer also includes all kinds of DSP processing, summing, and routing options too, and between its high-speed USB 2.0 connectivity and additional 24 channels of ADAT optical I/O, you can easily expand the capabilities of your MOTU 24Ai.Tons of high-quality connections packed into a single-rackspace audio interfaceDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesIt doesn't matter if you prefer DB-25 D-subs or Phoenix plugs, the MOTU 24Ai makes connecting up to 24 analog line channels a piece of cake. With so many high-quality inputs packed into a single rack space, the A24i is idea for taking direct outputs off of an analog mixing console or capturing signal onstage in a live environment. What's more, there are three pairs of ADAT optical ports onboard, offering an additional 24 channels of digital I/O via USB 2.0 or AVB network.The MOTU 24Ai's onboard DSP mixer offers a number of advantages you'll find useful in a variety of settings. For starters, this digital mixer supports up to 48 inputs and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 24Ai, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 24Ai, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb.Another extremely cool use of the 24Ai's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 24Ai or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue.Features:A versatile 48-in/24-out network audio interface for studio and live sound applicationsChoose from ultra-low-latency AVB ethernet or high-speed USB 2.0 computer connectivity24 high-quality analog inputs are available on both DB-25 D-sub connectors and Phoenix connectors24-channels of ADAT optical digital I/O lets you expand your system with additional gearOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfaces
Whether you're recording in the studio, taking direct output feeds off of an analog mixer, or capturing audio onstage, the MOTU 24Ao USB 2.0 audio interface gives you the high channel count and low latency you need. Like the rest of MOTU's popular AVB-equipped audio interfaces, the 24Ao lets you send a ton of audio across a standard network. The internal mixer also includes all kinds of DSP processing, summing, and routing options too, and between its high-speed USB 2.0 connectivity and additional 24 channels of ADAT optical I/O, you can easily expand the capabilities of your MOTU 24Ao.Tons of high-quality connections packed into a single-rackspace audio interfaceDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesIt doesn't matter if you prefer DB-25 D-subs or Phoenix plugs, the MOTU 24Ao makes connecting up to 24 analog line channels a piece of cake. With so many high-quality inputs packed into a single rack space, the A24o is idea for taking direct outputs off of an analog mixing console or capturing signal onstage in a live environment. What's more, there are three pairs of ADAT optical ports onboard, offering an additional 24 channels of digital I/O via USB 2.0 or AVB network.The MOTU 24Ao's onboard DSP mixer offers a number of advantages you'll find useful in a variety of settings. For starters, this digital mixer supports up to 48 inputs and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 24Ao, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 24Ao, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb.Another extremely cool use of the 24Ao's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 24Ao or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue.Features:24 channels (balanced/unbalanced)Choose from ultra-low-latency AVB ethernet or high-speed USB 2.0 computer connectivity24 high-quality analog outputs are available on both 3x DB-25 D-sub and 6x 12-pin Phoenix Max level: +20 dBu (digitally adjustable -24 to 0 dB) Onboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfaces
Built with MOTU’s award-winning MIDI interface technology, the MIDI Express XT is a professional MIDI interface and SMPTE synchronizer that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express XT provides 8 MIDI IN, 9 MIDI OUT, 128 MIDI channels and compatibility with all Mac and Windows software. Sixteen convenient, one-touch presets (8 factory and 8 user programmable) give you instant front-panel access to multiple operational configurations.The included ClockWorks console software for Mac OS X and Windows provides comprehensive MIDI routing, merging and muting. As a professional-grade SMPTE time code synchronizer, the Express XT converts and stripes SMPTE in all frame formats (23.976*, 24, 25, 29.97 drop and non-drop, and 30). SMPTE “jam sync” with adjustable freewheeling provides glitch-free sync. The Express XT also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The Express XT can distribute MMC transport commands to all other connected MMC devices.The MIDI Express XT takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for “hot-swapping” and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express XT’s internal international power supply delivers reliable performance and professional operation.Connect a foot switch to the convenient front-panel pedal input and then program it to generate MIDI data when pressed. Send the data to any connected devices. For example, you could send MIDI patch changes to synths and sound modules during live performance. No other MIDI interface offers this much value and performance at such an affordable price.
Two-way powered monitor including all the best technologies developed by Lipinski:1. Based on our Signature Series:a. custom driversb. cabinet made of 1 1/4" (30mm) MDF with internal bracing 2. Based on our latest development in amplifier technology:a. Lipinski Square - class A modules patented circuitryb. No capacitors in the signal pathc. No Integrated Circuits in the signal pathd. 2 x 300W power amplifiers 3. Custom construction and dampening.To avoid vibration caused by speaker proximity to power amplifier -which causes a significant amount of microphonic effect distortion -4. Low order crossover 5. Oversized power supply 6. Sophisticated tweeter protection 7. 1 dB step adjustable high and low frequencies 8. Subwoofer high-pass filter 9. Balanced/unbalanced Inputs and throughputs 10. 100-240V /50-60Hz operation * Price for one speaker
The FC 4 ST is a matched (within 1 dB!) stereo pair of two FC 4 microphones. Specs below.The FC 4 is a lowcost, small capsule, true condenser microphne with transformerless discrete low noise class-A electronics. The 20 mm, 3 um gold-sputtered diaphragm has a cardioid shaped polar pattern and a great sensitivety.The characteristics of the FC 4 are ideal for many recording and live situations. It will catch the crisp of your favourite guitar, every detail of your acoustic piano, the complexity of a clean electric guitar, the raw power of distorted amps, etc. We have equipped the FC 4 with high-pass filter and pad switches. This also makes it suitable for loud sounds and even vocal recording.Every musichan and studio have use for a couple of FC 4s. The small capsule cardioid condenser mic is one of the most basic mics for recording ever made. The FC 4 is truely a very versatile microphone at a very low price!
Because selecting the right woods is not enough, the luthiers at PRODIPE GUITARS have worked to obtain manufacturing quality which is above the norm for this price range.A new form of bracing and a few trade secrets make this an affordable guitar with plenty of personality.A draconian set of specifications:The best combinations of wood accompanied by faultless construction.A soundboard of spruce - known for its acoustic qualities.Back and sides of Indonesian mahogany which gives a light sound with deep, well defined bass notes.These ingredients give the PRODIPE GUITARS SD25 one of the best quality-price ratios in the market. Specifications:Series : StarterModel : SD25 DreadnoughtTop : SpruceBack and sides : Indonesian mahoganyNeck : MahoganyNut and saddle : FittedVeneer : MahoganyFingerboard : Composite rosewoodFinition : Satin varnishTuning machine : Die-cast nickel-platedStrings : Bronze 12/54
Kanta N°3 is the reference product for the line: this Hi-Fi loudspeaker superbly combines depth, impact and articulation of the bass register. The definition and neutrality of the midrange are incredible. The next generation IAL tweeter reproduces the tiniest details with clinical precision. The result? A precise, detailed sound, brimming with warmth and musicality. It is the start of a new era for those who love sound...This acoustic masterpiece performs at its best in large rooms, from 430 to 860 ft² (40 to 80 m²). Entirely dedicated to acoustic performance and with an incredibly original look: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive Hi-Fi technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers. Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design! With eight front panel finishes, gloss or matt, there are several possible combinations. So many different styles, each one so different from the next, means there’s something for everyone. Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision. This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear. The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look. A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes. With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer. With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.
Linear frequency response. Zero coloration. Transparency. Headroom. To hear the truth, you need reference speakers that offer up. And if you work in a home or small studio you have even greater challenges, from the lack of space on your desk to the “less than ideal” position of your audio workstation, typically placed against a wall.Now, with iLoud Micro Monitor, you can hear the truth in your music anytime and everywhere. The smallest active studio reference monitoring system in the world, iLoud Micro Monitor provides you with ultra-accurate true linear frequency response with no coloration, and does so in every listening environment, especially in home and project studios. Loud Micro Monitor is two extremely portable, high-performance bi-amped speakers that delivers a combined 50W RMS of power for solid bass, plenty of headroom and a stunningly defined stereo image. Whether you’re recording, editing, mixing or mastering audio, editing video, sound designing or gaming, iLoud Micro Monitor ensures your production will translate well to the huge variety of consumer devices — headphones, home stereo systems, gaming consoles, car audio systems, TVs, and other listening systems.With iLoud Micro Monitor, you will hear the truth in your music no matter whether you’re mixing in your bedroom, mastering in a small studio or just listening to your favorite tunes at home. And best of all, it offers high-end features that can be found only in monitors in big budget studios, but without the high-end price tag.Specifications:Type: 2-way active, bi-amped studio monitorFrequency response (-3dB): 55Hz - 20kHzFrequency response (-10dB): 45Hz - 22kHzCrossover frequency: 3kHzTweeter: 3/4" silk dome, neodymium magnetWoofer: 3" high-rigidity custom composite materialMaximum SPL @ 50cm (with two speakers playing, averaged sinewave from 100 Hz to 10 kHz): 107dBNumber of amplifiers: 4Amplifiers type: High Efficiency Class-DTotal output power (both speakers): 70W (peak) - 50W RMSLow frequency output power (single speaker): 18W RMSHigh frequency output power (single speaker): 7W RMSAcoustic settings: high shelf (0dB or +2dB from 4kHz up); low shelf (0dB or -3dB from 250Hz down); desktop (+3.5dB between 1kHz and 10kHz and -1dB below 400Hz)System total latency (analog input): 1.02 msSystem total latency (Bluetooth input): 155 ms (depends on host implementation, tested on iPhone 6s / iOS 10.0.1)
DescriptionStylish Danish Hi-FiTangent’s Spectrum range of affordable hi-fi and home theatre loudspeakers offer typically Danish contemporary, stylish designs fused with high-end audio quality from compact enclosures … to create the very best in two and multi-channel applications.Latest Technology The range benefits from latest-technology drive units carefully selected by Tangent’s acoustic engineers, including a wide dispersion 25mm soft fabric dome tweeter, together with a 110mm or 130mm long throw paper coned bass driver … or an 200mm bass driver featured in the front firing subwoofer.Danish Speaker DesignThe compact, stylish enclosures boast a solid, inert construction to reduce cabinet colouration and resonance. Available in attractive midnight black or polar white highly durable matt satin finishes, all drive units are protective with colour-matched, integrated mesh grilles. Contrasting walnut base plinths complete the unique aesthetic appeal across the range.Spectrum XSW-8The XSW-8 subwoofer is a compact front firing bass module designed to enhance bass performance and perfectly completes the Spectrum’s 5.1 packaged system. Also using a sealed enclosure for ultimate low-end power, the XSW-8 uses a 200 mm bass only driver and a 90 watt integral amplifier to produce low-end frequencies down to 31Hz. The impressive features list also includes volume level, phase switching and variable crossover.Make it a SystemComplete your system with the new Spectrum XC Centre speaker and Spectrum X4, X5 or X6 for a full surround setup.
As a 3-way active monitor, the Barefoot MicroMain45 utilizes the same amplifier, signal path and driver technology of the MiniMain12. Downsizing the hefty 130+ lbs size of the original to a tight 35+ lbs package, the MicroMain45 features an 8” aluminum woofer, two x 2.5” aluminum midranges and a 1” tweeter. With a bass response of -3dB @ 40Hz, frequency response of 40Hz – 45 kHz (±3dB) and 53Hz – 40kHz (±1dB), this is the sound that Barefoot enthusiasts have come to know and love.Founded on the idea of creating a new type of audio monitor, Barefoot Sound was started by Thomas Barefoot to meet the growing needs of small to mid-sized project studios. By offering well-designed monitors that could take the space of several sets of speakers, audio enthusiasts are able to have more room for other types of gear, while still having an impeccable monitoring system. The Barefoot Sound MM45 monitors follow in this lineage of incredible speakers like the MicroMain27 and MicroMain35.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM45 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain45′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers.That would be impossible. But the MM45 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM45′s emulation settings.Specifications:Controls:: Input level stepped attenuator, Equalization contourInput Impedance:: 50k OhmFrequency Response:: 40Hz – 45kHz (±3dB),53Hz – 40kHz (±1dB)Bass Response:: -3 dB @ 35Hz, Q = 0.707Slope = 12 dB/octaveCabinet:: 14 liters total internal volume, Sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber wool acoustic damping throughoutCrossover Frequencies:: 600 / 3600 HzTweeter:: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges:: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexSubwoofers:: 8″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 250W HypexAC Power Input:: Nominal 115 VAC or 230 VAC selectablePower Consumption:: Idle: 18W, Maximum: 400WWeight:: Speaker: 37.5 lbs each (17 kg)Shipping: 47 lbs each (21 kg)Dimensions HxWxD:: Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm)Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm)
Barefoot Sound is proud to introduce the revolutionary new MiniMain12, possibly the most accurate, revealing and technologically advanced recording monitor ever made. This is a bold statement, but the MiniMain12 is an incredibly bold speaker. With vanishing low distortion, breathtakingly wide dynamic range, ultra-fast transient response plus our amazing MEME™(Multi Emphasis Monitor Emulation™) technology. The MiniMain12 is a 4-way active system with 7 drive units housed in sealed enclosures spanning 20Hz to 40kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response.Every driver has an under-hung voice coil moving inside an advanced geometry motor that enables it make extremely long linear excursions. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The aluminum cone subwoofers, woofers and midranges radiate as perfect pistons to at least 2.5 octaves beyond their respective bandwidths.Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage of the MM12. Melding the system together is a groundbreaking DSP crossover that has taken Thomas Barefoot more than 4 years to develop. With beautifully designed high end converts and cutting edge proprietary filtering techniques the MiniMain12 produces such a seamless and coherent wavefront that, if you dare, you can actually listen to this speaker from less than 3 feet away with no sonic compromise. And yes, the MM12 works perfectly out to far field distances as well, producing SPLs equivalent to big mains. If all this weren’t enough, the MiniMain12 brings yet another revolutionary feature into the mix – MEME™(Multi Emphasis Monitor Emulation™) technology. While no other monitor in the world can match the MM12’s linearity and transparency, the MM12 actually has the capability to emulate other speakers! Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space. So why not make the MM12 sound and translate like those speakers as well?With the turn of a knob one can switch from the MiniMain12’s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MiniMain12 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even some of their distortion components. If you know how to work on these speaker you will feel very comfortable working on the MM12’s emulation settings. Specifications:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 20Hz – 50kHz (±3dB),28Hz – 40kHz (±1dB)Bass Response: -3 dB @ 20Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 90 liters total internal volume, Sealed sub enclosure, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout.Crossover Frequencies: 80 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 250W HypexMidranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 250W HypexWoofers: 2 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursionAmplifier: 1200W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 50W, Maximum: 1500WWeight: Speaker: 120 lbs each (54 kg) – no handlesShipping: 135 lbs each (61 kg) – no handlesDimensions HxWxD: 26.0 x 14.4 x 21.9 inches (660 x 366 x 556 mm)
Barefoot Sound is proud to introduce the revolutionary new MiniMain12, possibly the most accurate, revealing and technologically advanced recording monitor ever made. This is a bold statement, but the MiniMain12 is an incredibly bold speaker. With vanishing low distortion, breathtakingly wide dynamic range, ultra-fast transient response plus our amazing MEME™(Multi Emphasis Monitor Emulation™) technology. The MiniMain12 is a 4-way active system with 7 Over a decade ago, Thomas Barefoot applied his expertise and experience as an engineer, scientist and inventor in the computer industry to his lifelong passion for music. Approaching the pro audio industry with a fresh pair of eyes, he concluded that every project would benefit from using monitors with the same sound quality, dynamic range and bass extension at each stage of the production process. The innovative reference monitor designs that Thomas subsequently developed not only deliver the same performance and quality from recording through mastering, they also turned the studio monitor speaker business on its head, outperforming many well-established high-end products.The MasterStack12 represents the pinnacle of Thomas’ achievements in monitor speaker design to-date. Barefoot’s flagship reference monitor system is a 4.5-way active modular tower with 10 drive units — a 1-in. ring radiator tweeter, two 2.5-in. mid-range, three 7-in. woofers and four 12-in. subwoofers — housed in two cabinets. A third enclosure houses signal and power distribution and may be optionally used as a decoupling base unit for each tower.What is a 4.5-way system?In a typical 4-way system, subwoofers, woofers, mid-range drivers and tweeters all operate within discrete frequency bands, transitioning from one to the next at the frequencies set in the crossover networks. In the MasterStack12 system, all three woofers work together in the lower frequencies of the band, down to the frequency at which the subwoofers take over. But only two woofers extend up to the mid-range band crossover point. Having three woofers working together in the lower portion of the band offers lower distortion through greater efficiency. At higher frequencies, where the signal becomes increasingly more directional, there is a smooth transition to the wider dispersion pattern created by just two woofers.Four speakers in oneLike all Barefoot monitors, the MasterStack12 features revolutionary MEME™ (Multi-Emphasis Monitor Emulation™) technology, which harnesses sophisticated DSP modeling to mimic the frequency, phase, transient response, dynamic compression and distortion characteristics of various classic nearfield studio monitors. Many people still like to reference their work on old, familiar monitors to check how their mixes will translate or to focus on a specific aspect. But with Barefoot monitors you can put those other reference speakers into storage and free up some space on the console, because one set of MasterStack12 monitors can take the place of three alternate pairs.Using a wired remote you can switch your Barefoot monitors through four different voices and preview your mix as it would sound through three alternate reference speakers, all without moving from the optimum stereo listening position. “Old School” rolls off the extreme highs and lows and brings the mid-range presence forward, capturing the essence of the NS10M. “Cube” is an homage to the classic full-range micro-monitor and is a useful reference setting for any mix that you expect to be played on earbuds through a laptop or handheld device. “HiFi” behaves like a home audiophile speaker, warming up the mid-range and sweetening the highs, for client playback or just listening in the control room. “Flat” selects the true, revealing Barefoot sound.Specifications:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 25k OhmFrequency Response: 18Hz – 50kHz (±3dB)26Hz – 40kHz (±1dB)Bass Response: -3 dB @ 18Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 180 liters total internal volume, Sealed sub enclosures, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout.Crossover Frequencies: 80 / 200 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 250W HypexMidranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 250W HypexWoofers: 3 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursionAmplifier: 500W HypexSubwoofers: 4 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursionAmplifier: 2400W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 100W, Maximum: 1800WWeight: Weight: 280 lbs per tower (127 kg) – no handlesShipping: 325 lbs per tower (147 kg) – no handlesDimensions HxWxD: Cabinet: 63.0 x 14.4 x 21.9 inches (1600 x 366 x 556 mm)Footprint WxD: 23.0 x 21.5 (584 x 546 mm)
The MicroMain26 is a 4-way active system with 6 drive units housed in sealed enclosures spanning 30Hz to 45kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The 2.5” aluminum cone midrange is housed in a cutting edge 3D printed waveguide enclosure.The 5.25″ woofers feature a phalanx of advanced technology, yielding upper bass and lower midrange detail that rivals any driver on the planet. Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage used in every Barefoot monitor. Melding the system together is a groundbreaking new DSP crossover that took Thomas Barefoot more than 4 years to develop. With beautifully designed high end converters and cutting edge proprietary filtering techniques the MM26 sound stage is seamlessly coherent and deeply revealing.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM26 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain26′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MM26 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM26′s emulation settings.Χαρακτηριστικά:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 30Hz – 45kHz (±3dB)40Hz – 40kHz (±1dB)Bass Response: -3 dB @ 30Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 32 liters total internal volume, Sealed subwoofer, woofer and mid enclosures, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughoutCrossover Frequencies: 100 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges: 2.5″ aluminum cone, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexWoofers: 2 x 5.25″ poly/paper cone, Advanced geometry neodymium motor, +/- 5 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 10″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 500W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 30W, Maximum: 650WWeight: Weight: Speaker: 71 lbs each (32 kg)Shipping: 83 lbs each (38 kg)Dimensions HxWxD: Dimensions HxWxD: Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm)Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm)
The Stylum line of speaker stands has been designed by audio specialists for audio fanatics. Their common structure is really functional.The adjustable spikes, located on both the top and bottom plates, ensure ideal adjustment for a perfect stability of the installation.The anti-vibration system guarantees the best performances from your speakers. Features:Cable management systemAdjustable spikes and counter spikesSkidproof rubber padsSpikes on top plate Specifications:Plate 1 (W x D): 200 x 165 mm Thickness: 3 mm Maximum load: 50 kgPlate 2 (W x D): 250 x 220 mm Thickness: 3 mmDelivered disassembled with screws kit, mounting instructions and tools.Dimensions (W x H x D): 250 x 500 x 220 mmGross weight: 9 kgNet weight: 8.4 kg2 years WarrantyQuantity/box: 2Design: Powder Coated White, Powder Coated Silver, Powder Coated Black
The new Spectrum range by Tangent brings you contemporary design and style in a compact package. The range benefits from a wide dispersion 25mm soft fabric dome tweeter together with a 4 or 5 inch long throw paper bass driver with protective metal mesh grille. These compact stand or shelf mount monitors are available in attractive midnight black or polar white matt finishes with walnut base plinths. Features: 1" Tweeter4" Bass reflex woofer2-wayFrequency range (+/- 3dB): 65 - 20000 HzImpedance: 4-8 ΩRecommended Amplifier: 20 - 100 WattOptional wall mountOptional ceiling mountSpecifications:Speaker Units: 1'' soft dome tweeter / 4'' wooferSystem: 2-way with bass reflectSensitivity: 88 dBFrequency: 65 - 20000 Hz (+/- 3dB)Impedance: 6 ΩPower: Max Music Power 100 wattWeight: 6.75 / 7.75 kgProduct Dimensions: 146 x 275 x 198 mmCarton Size: 350 x 390 x 265 mm
The new Spectrum range by Tangent brings you contemporary design and style in a compact package. The range benefits from a wide dispersion 25mm soft fabric dome tweeter together with a 4 or 5 inch long throw paper bass driver with protective metal mesh grille. These compact stand or shelf mount monitors are available in attractive midnight black or polar white matt finishes with walnut base plinths. Features: 1" Tweeter5" Bass reflex woofer2-wayFrequency range (+/- 3dB): 50 - 20000 HzImpedance: 4-8 ΩRecommended Amplifier: 20 - 100 WattSpecifications:Speaker Units: 1'' soft dome tweeter / 5'' wooferSystem: 2-way with bass reflectSensitivity: 88 dBFrequency: 50 - 20000 HzImpedance: 6 ΩPower: Max Music Power 100 wattWeight: 9.8 / 12 kg (pair)Product Dimensions: 166 x 345 x 205 mmCarton Size: 435 x 425 x 285 mm
The new Spectrum range by Tangent brings you contemporary design and style in a compact package. The range benefits from a wide dispersion 25mm soft fabric dome tweeter together with a 4 or 5 inch long throw paper bass driver with protective metal mesh grille. These compact stand or shelf mount monitors are available in attractive midnight black or polar white matt finishes with walnut base plinths. Features: 1" Tweeter5" Bass reflex woofer2-wayFrequency range (+/- 3dB): 50 - 20000 HzImpedance: 4-8 ΩRecommended Amplifier: 20 - 100 WattSpecifications:Speaker Units: 1'' soft dome tweeter / 5'' wooferSystem: 2-way with bass reflectSensitivity: 88 dBFrequency: 50 - 20000 HzImpedance: 6 ΩPower: Max Music Power 100 wattWeight: 9.8 / 12 kg (pair)Product Dimensions: 166 x 345 x 205 mmCarton Size: 435 x 425 x 285 mm
The brand new DAB2go Junior is the baby brother in the Tangent 2go series. However it’s no baby in terms of performance and function, as behind the modern Scandinavian design with its durable finish and attractive state-of-the-art fabric, DAB2go Junior features all the latest audio and portable radio technology you’ll ever need.A Digital radio and Bluetooth speakerThe new DAB2go Junior can receive your favourite radio stations from both FM analogue and Digital DAB and new DAB + platforms. It’s also equipped with Bluetooth technology so you can stream your own music wirelessly from a smartphone, tablet and other devices.Wake up to radioThanks to it’s low standby consumption, the DAB2go Junior can also be used as an alarm clock to wake you each morning to the sound of your favourite station.Music on the go Just insert four AA batteries into your Tangent DAB2go Junior to enjoy quality sound from the radio or Bluetooth device anywhere in and around, or away from home.Versatile - wall mounted or tabletop?Tangent’s new DAB2go Junior can be placed on a bookshelf, kitchen side, bedside table etc. or you can also purchase the optional, specially designed wall mount to hang your DAB2go Junior on the wall.Features:Sleek Danish DesignOptional Wall Mount (not included)DAB/DAB+/FM/BluetoothOptional Battery OperationSpecifications:Alarm clock function: Yes Dual alarmStandby consumption:
The new DAB2go+ is the latest model from Tangent's well-known 2go series. Like its predecessors, the DAB2go + offers high quality audio, ease of use and state-of-the-art technology, all tastefully packaged within a classic Walnut, Piano black or White Scandinavian design.Easy to useThe large twin silver buttons on the top panel enable various functions including easy turn on/off, volume control and radio station search/selection, whilst the large full colour digital display provides a clear visual picture of all functions available.Portable - take it anywhereWith the new DAB2go+ you can enjoy quality sound wherever you are for up to 8 hours, thanks to the built-in lithium battery that automatically recharges whenever you plug the DAB2go+ into mains power. The DAB2go+ also features an ergonomically designed carry handle making it easy to carry around the house, in the garden, on the beach or in the countryside.A Bluetooth speaker too!If you want to hear music from your smartphone or other device, you can also use DAB2go+ as a powerful, portable speaker by either streaming your favourite music wirelessly via Bluetooth or connecting the device with an AUX cable (mini jack).A premium radio tunerThe new Tangent DAB2go+ is of course also a radio with fast and reliable access to many local and national radio stations, thanks to a high quality digital tuner. You can choose to listen via FM analogue as well as Digital DAB and new DAB+ bands whenever you like, or set the radio to wake you up in the morning courtesy of the built-in alarm clock.Danish Sound heritageLike its predecessors, the sound quality of the latest DAB2go+ is unequalled for the size and price. The specially developed 3” full range speaker drive unit housed within an MDF bass reflex cabinet delivers optimum audio quality for both vocal and instrumental music. Plus with the option of choosing between 8 different pre-programmed EQ audio settings (equalizer), you can always adjust the audio to suit the listener.Versatile - wall mounted or table-top?The new DAB2go+ can of course be placed on any surface – your desk, kitchen table, bookshelf, bedside table, or wherever you prefer. However, as something unique in the Tangent 2go series, all radios can also be hung on the wall with a special wall mount (purchased separately).Features:Bass reflex Cabinet for premium sound8 hours battery timeFM/DAB/DAB+BluetoothColour Screen8 EQ presetsSpecifications:Alarm clock function: Yes Dual alarmStandby consumption:
Tangent’s new Pebble Splash offers great sound from a small and convenient portable speaker. The sleek, slim look from Tangent’s design team makes the Pebble Splash the ultimate all-weather speaker to carry in your pocket or handbag. The design team have also used their experience to create premium sound quality by fusing clear vocals with deep bass at levels normally only expected from much larger speakers.Water ResistantThe new Tangent Pebble Splash is water repellent to IP57 standards, meaning it can be soaked for shorter periods as long as it is allowed to dry again. The result is a loudspeaker that can handle any kind of weather as well is the perfect speaker for the bathroom, next to the pool or on the beach.Wireless audio in special classBehind its unique Danish design, Tangent’s new Pebble Splash hides multiple speaker drivers, providing amazing multi-directional stereo sound. Simply connect wirelessly via Bluetooth or an AUX cable (mini jack) for convenient and easy portable listening.Long battery lifeThanks to its 2000 mAh lithium rechargeable lithium battery, the Pebble Splash speaker can play your favourite tracks for up to 10 hours. It can also be easily charged using the USB cable supplied from a USB power supply, power bank or directly from your PC or MAC.Built-in microphoneFor added convenience when using with your smartphone, the Tangent Pebble Splash also has a built-in microphone, so you can use it to make hands-free calls or attend conference calls for business use.Features:Water repellent IP5710 hours of battery timeCompact stylish designCarry strap Specifications:Input: Bluetooth, 3.5 mm AUX (Mini Jack)Power: DC 5VDC/1A Micro USB - 100-240V EUBattery Operation: Lithium-ion built-in re-chargeable - 8 hours of operating time at normal usageWeight: 400 / 560 gProduct Dimensions: 17.7 x 3.7 x 7.7 cmCarton Size: 23 x 10.5 x 4.5 cm
Tangent Pebble MaxThe portable Bluetooth speaker Tangent Pebble Max is cut to follow you in all your adventures thanks to its IPX5 certification ensuring great resistance to water and dust. Replacing the popular Tangent Pebble Splash , the Tangent Pebble Max speaker provides 2 x 30 watts of power and a micro SD card reader, in addition to Bluetooth music streaming from a smartphone, tablet or a computer and the mini-jack auxiliary input. Thanks to its 10-hour battery life, the Tangent Pebble Max portable Bluetooth speaker is able to accompany you all day long. Finally, its microphone makes it easy to answer all your phone calls. waterproof and robust The Tangent Pebble Max portable Bluetooth speaker is ideal for enjoying music during all your activities. Developed to be used in all weather conditions, the Tangent Pebble Max speaker is designed around a robust and waterproof chassis allowing it to be used at the beach thanks to its high resistance to dust and sand. Best of all, the Tangent Pebble Max speaker is IPX5 certified, so it can withstand splashes of water and rain. It can thus be used serenely at the edge of the swimming pool or in the bathroom. 2 x 30 wattsThe Tangent Pebble Max Bluetooth speaker houses multiple drivers to deliver multi-directional sound and ensure every listener receives the music equally. Its acoustic design is carefully thought out to deliver clear vocals, as well as powerful and deep bass while maintaining a compact size. Thanks to its power of 2 x 30 watts, the Tangent Pebble Max loudspeaker is ideal for setting the mood indoors and outdoors. Bluetooth 5.0The Tangent Pebble Max portable speaker is equipped with a Bluetooth 5.0 controller to stream music from any smartphone, tablet or computer. The transmission takes place over a perimeter of 10 m, giving you great freedom of movement. To accompany you all day long, the Tangent Pebble Max speaker has a battery offering up to 10 hours of autonomy. Charging is easy using the included USB-C port and cable.micro SD and mini-jack In addition to its Bluetooth receiver, the Tangent Pebble Max speaker is also equipped with a micro SD card reader to play all your dematerialized music, as well as an auxiliary input in 3.5 mm mini-jack format. Thanks to the latter, it is possible to connect a non-Bluetooth compatible source such as a CD player or an audiophile player, for example. built-in microphone Very easy to use, the Tangent Pebble Max portable Bluetooth speaker incorporates a physical interface on its upper side to easily adjust the volume, change tracks and start playback. Volume management and track sectioning can also be done from the associated source. Thanks to its built-in microphone, the Tangent Pebble Max speaker can be used to answer your phone calls with great clarity. Easily transportable, with a long battery life of 10 hours, numerous inputs and sealed against dust and water, the Tangent Pebble Max Bluetooth speaker is the perfect solution for enjoying powerful sound and deep bass in a compact size and resistant to the test of time.
The Omega 100’s design is at once simple and elegant. Ultra-connected, it implements state-of-the-art technologies which reproduce the warm, vintage sound of vinyl, without constraints.Unique aesthetic qualitiesThe Elipson Omega 100 has been designed to offer a streamlined, enjoyable user experience. Its large sub-chassis integrates a variety of functions which are showcased by a band of chrome-plated or brushed metal. Its silhouette, finish, and meticulous construction are a tribute to sophisticated French design. Not a single screw is visible, the cover is made-to-measure and the angles are rounded for a more elegant appearance. The high-tech design creates a contrast with the nostalgia conjured up by the object itself, which makes this turntable a neo-vintage reference for the living room.An ultra-connected turntable Faithful to its principles, Elipson aims to endow this mythical object with new functions. After having found that the majority of people buying LPs were under 30, the brand built a turntable which can be easily connected to all the Bluetooth speakers on the market. The carefully selected, state-of-the-art electronics offer a number of possibilities:A premium phono preamp allowing the user to connect the turntable to any amplifier.Apt-X Bluetooth transmission for wireless connectivity and a wider range of placement options, letting the user enjoy the warm, analog sound of LPs with any portable speaker.A USB output to allow the user to make digital copies of his or her favorite records, which may then be brought anywhere. Optimized FunctionsEach of the Omega 100 turntable’s functions has been optimized. Its carbon tonearm, designed by the brand’s engineers, is equipped with a Ortofon OM10 cartridge. The suspended motor entirely eliminates friction, while the extraordinarily precise rotational speed generator enables playback for 33, 45 and 78 rpm records.The world’s only preamplified, Bluetooth turntable “Made in France” Designed and built in France, the Elipson turntable is a testament to exceptional craftsmanship. A team of passionate experts ensures that Elipson turntables are manufactured with the same amount of care and attention to detail, every day. Specifications:Chassis: Lacquered PMMA Plate: Pressed steelTonearm: CarbonCartridge: OM 10Centralizer: AluminiumFrequency Response: (±3 dB)25Hz-20KHz (-3 dB/+1 dB)Preamp: Built-in high-end RIAA preampBluetooth: Class 2 : -6dBm ~ 4 dBm / 2.4G : 2.402 à 2.480GHzaptX: YesUSB: Opto-isolated USB output allowing vinyl recordingGain: MM : 40,5 dB / MC : 61 dBCrosstalkMM :88 dB / MC :78 dBTHDMM : 0,006 % / MC : 0,05 %Signal/noise ratio:MM : 82 dB / MC : 76 dBDimensions (W x H x D)450 x 120 x 380 mmWeight: 5,8kg
The T5V is a highly affordable two-way nearfield monitor and optimized for small control rooms. With its 5” woofer the bass-frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair. Excellent acoustic characteristics, small dimensions and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video and broadcast production.Specifications:U-ART 1.9” Accelerated Ribbon Tweeter with HPS WaveguidePolypropylene 5” woofer and rear-firing bass-reflex portCumulated Amp. Power RMS: 70 WFrequency Response: 45 Hz – 25 kHzMax. SPL Per Pair at 1 m: ≥106 dB
KRK Systems V Series 8 nearfield studio monitors are specifically designed for audio production applications where accurate reproduction is critical. KRK worked with hundreds of pro engineers/producers/mixers to develop these groundbreaking monitors. Recording and broadcast studios as well as sound design and audio production houses will benefit from adding the V Series 8 as the go to monitor of choice.V-Series 8 includes 49 user selectable EQ settings to ensure proper setup for room acoustics and placement anomalies as well as taste and individual preference. The KRK design team has painstakingly modeled and analyzed hundreds of monitor placement and room acoustic situations to ensure that KRK delivers the most useful tools with minimal adjustments.Features:KRK custom designed Kevlar tweeterKRK custom designed Woven Kevlar wooferOptimized front ported bass reflex enclosure designBi-amped Class-D amplificationAcoustic and desk loading condition correction Low Frequency EQ'sMid and High Frequency EQ'sPrecise input level attenuation switchStandby, ground lift, input sensitivity, and logo LED selectorsOptional protective grille included for mobile broadcast applicationsFriction lock, Neutrik combo (XLR and TRS) connectorSpecifications:Configuration:2-WaySystem type:Active Studio MonitorLow-Frequency:Woofer, 8" cast aluminum frame, Kevlar cone, ferrite magnetHigh-Frequency:Tweeter, 1", Kevlar dome, ferrite magnetFrequency Response:35Hz - 19kHzFrequency Range:29Hz - 24kHzMax Peak SPL:118 dBSPLPower Output:LF (200 Watts), HF (30 Watts), Total (230 Watts)
Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.Specifications:Semi-Modular design requires no patching for swift, inspired music creationVoltage Controlled 32 Step Sequencer with 64 Sequence LocationsLow Pass & High Pass Moog Ladder Filter (20Hz–20kHz) with voltage controlled resonanceExternal audio input for processing outside sound sourcesDefinitive Moog oscillator with Pulse and Sawtooth wave outputs5-pin MIDI input and MIDI to CV converter32 Modular Patch Points (Includes 5 patch cables)2 Voltage controlled mixersSuperb companion to Werkstatt 01, Minitaur and other synthesizersMain module can be easily transferred into a Eurorack skiff or caseMount 2 or 3 units vertically with optional 2 and 3 Tier kitsComplete solution for new Eurorack users – no other items required
Artists, engineers, and content creators like you are more innovative than ever, and we know how much you rely on your gear to express your creativity. MR Series monitors bring you closer to your music and your mix than ever before to deliver professional results without breaking the bank. With an all-new design, MR Series monitors utilize our proven technology and acoustic tuning to deliver incredible accuracy and clarity. The logarithmic waveguide provides an ultra-wide listening sweet spot and enhanced stereo imaging while the Acoustic Space Control allows you to adjust the frequency response of the monitor to match your studio. Whether it’s dialogue, hip-hop, rock, and beyond, you can listen with confidence knowing your mix will sound great anywhere.The MR624 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end.Specifications:Equipment: 6.5 "woofer and 1" tweeter65 W bi-amplified Class A / B amplifierFrequency range: 38 - 20000 HzLow and high thomann frequency 3-stage adjustableConnections: XLR, jack, RCADimensions (H x W x D): 382 x 211 x 284 mmWeight: 7.5 kg
