MENU
Αναζήτηση
Filters
Rugged 15 cm gooseneck module with programmable mute switch (on/off, push-to-talk, push-to-mute), high RFI immunity, LED ring, XLR connector.
AKG GN 30 ESP features a programmable mute switch to cover a wide range of applications. An LED ring provides a clearly visible MIC ON/OFF indication.Specifications:Bass filter:250 Hz, -10 dB bei 50 HzDimensions:max. dia.: 20 mm (0.8 in.), length: 260/405/600 m (10.2/15.9/23.6 in.)Net weight:140/430 g (4.9/15.2 oz.), 110/522 g (3.9/18.4 oz.), 194/573 g (6.8/20.2 oz.)
Drum set including : 1x D112, 4x C518, 2x C1000S.
JBL VRX 918SP. Powered 18 flying subwoofer, 2268H Differential Drive LF, Crown DPC-2 amplifier module with system DSP; integral rigging hardware compatible with VRX932LAP; top mounted M20 threaded pole socket black DuraFlex finish. Specifications:Driver1 x JBL 2268H 18" 457 mm (18 in) Differential Drive wooferCrossover80 or 120Hz selectableFrequency Range31-220HzImpedance2 x 2 OhmsPower Output1500W Peak LF: Dual-Bridged Technology Class DMaximum Sound Pressure Level (SPL)126dBConnectorsXLR with loop throughControlsInput Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass80 Hz High-Pass enable/disable for XLR loop thruEnclosure Material18mm, 13ply Baltic Birch plywoodDimensions20 x 23.5 x 29.5" (508 x 297 x 749mm)Weight85 lbs (38.5kg)
JBL VRX 932LAP. Powered 12" two-way line-array system with 1 x 2262H Differential Drive LF, 3 x 2408J HF on Constant Curvature waveguide Crown DPC-2 amplifier module with system DSP; dual angle pole socket and integral rigging hardware black DuraFlex finish. Specifications:Active or PassiveActiveFrequency Response75 Hz - 20 kHzPower Capacity1750W Peak, 875 ContinuousMaximum Sound Pressure Level (SPL)136 dBNominal SensitivityNot Specified by ManufacturerImpedanceLF: 2 x 2 ohmsHF: 4 ohmsCrossoverNot Specified by ManufacturerLow Frequency DriverJBL 2262FF 12" Dual Voice CoilHigh Frequency Driver3 x JBL 2408J 1.5" Voice Coil Neodymium Compression DriverEnclosure MaterialBirch Plywood with Black DuraFlex FinishInput ConnectionsNeutrik PowerConDimensions13.75 x 23.5 x 17.5" (34.9 x 59.7 x 44.4 cm)Weight52 lbs (24 kg)
JBL Control 226C/T-PL. 6.5'' Coax Ceiling Loudspeaker. True-Broadband 120° Coverage. 150 Watts, 47 Hz to 19kHz Frequency Response, 90 dB Sensitivity. 1'' Exit Compression Driver. 8 ohms Plus 70V/100V Taps at 60W, 30W, 15W (And 7.5W 70V). 13'' Round Ported Baffle x 9.7'' Deep. (Priced as Each, Sold in Pairs).
JBL ASB 6118. High Power Single 18" Subwoofer. 1 x 18" 2242H VGC Driver. Suspension Eyebolts Not Included. Arrays with AM6200 and AM4200 Mid-High Loudspeakers Using Optional PAF-2K Planar Array Frame Kit.
Ultra-light condenser cardioid instrumental miniature mic for accodeon and speakers with mini XLR connector for use with B 29 L battery operated power supply, MPA V L external phantom power adapter, or AKG WMS bodypack transmitters.
JBL VRX 915M. 15" two-way dedicated floor monitor system with an 800 watt 2265H Differential Drive LF; 2452H, 4'' voice coil compression driver, 50 x 90 waveguide passive or bi-amplified operation; compact 30 sysmmetrical wedge enclosure; Black DuraFlex finish heavy duty 16 gauge foam backed steel grille.Specifications:800W/1600W/3200W50 x 90° CoverageDifferential DriverCan Be Bi-amped
Control 19CS with Subwoofer Based Transformer. For use on a 70.7V or 100V Distributed Line, Switchable Taps at 60W, 30W and 15W (Plus 7.5W at 70.7V only), No SonicGuard. Priced as Each, Packed as Pairs. Master Pack Quantity: 2 Pieces. Specifications:Active or PassivePassiveFrequency Range42 Hz - 200 Hz, -10dBPower Capacity200 Watts ContinuousMaximum Sound Pressure Level (SPL)115dB 1 mSensitivity95dB SPL, 1W 1 mImpedance8 OhmsCrossoverNoDriver8" Polypropylene Cone w/1.5" coil on Aluminum FormerEnclosure MaterialBackcan: Formed SteelBaffle/Rim: Medium Impact Polystyrene, Fire Rated UL94V-0TerminationRemovable Locking Connector with screw-down terminals2 x Inputs2 x Loop-Thru OutputsDimensionsOuter(H x Dia): 13.6 x 13.6" (345 x 345mm)Ceiling Front to Back of Backcan: 12.5" (318mm)Weight14 lb (6.3 kg)(ea.)
JBL Control 321C. Premium 12'' Coax Ceiling Loudspeaker. True-Broadband 90'' Coverage. 250 Watts, 34 Hz to 18 kHz Frequency Response, 94 dB Sensitivity. 2412H Compression Driver. 14.4 Square Ported Baffle x 8.8 Deep. EZ-Rail For Ease of Installation. UL LISTED. Specifications:Frequency Response47 Hz - 16 kHz, +/-3dB (in ceiling)Maximum Power Handling600 WattsImpedance8 OhmsSPL118dB avg., 124dB peakBeamwidth90° conical, broadband (1kHz - 10kHz)Horizontal Beamwidth90° conical, broadband (1kHz - 10kHz)Vertical Beamwidth90° conical, broadband (1kHz - 10kHz)DirectivityFactor: 8.7 (1kHz - 16kHz)Index: 9.4dB (1kHz - 16kHz)ConstructionKevlar-reinforced cone wooferTitanium diaphragm compression driver with diamond surround and ferro-fluid coolingPorted Metal BaffleMagnetSaturated-gap geometryVoice CoilLF: 2"HF: 1"Dimensions (HxWxD)14.4 x 14.4 x 8.8" (366 x 366 x 223mm)Weight16 lb (7.3 kg)
JBL Control 322C. High-Power 12'' Coax Ceiling Loudpeaker with Medium Format Compression Driver. True Broadband 90'' Coverage. 400 Watts, 32 Hz to 20 kHz Frequency Response, 95 dB Sensitivity. 2407H Compression Driver. 14.4 Square Ported Baffle x 8.8 Deep. EZ-Rail for Ease of Installation. UL LISTED. Specifications:Frequency Response48 Hz - 19 kHz, +/-3dB (in ceiling)Maximum Power Handling1600 Watts, 2 hrs., pink noise1000 Watts, 100 hrs.Impedance8 OhmsSPL121dB avg., 124dB peakBeamwidth90° conical, broadband (1kHz - 10kHz)Horizontal Beamwidth90° conical, broadband (1kHz - 10kHz)Vertical Beamwidth90° conical, broadband (1kHz - 10kHz)DirectivityFactor: 9.0 (1kHz - 16kHz)Index: 9.5dB (1kHz - 16kHz)ConstructionKevlar-reinforced cone wooferMedium-Format compression driver with radial slot phase plugPorted Metal BaffleMagnetLF: Saturated-gap geometryHF: NeodymiumVoice CoilLF: 3"HF: 1.5"Dimensions (HxWxD)14.4 x 14.4 x 8.8" (366 x 366 x 223mm)Weight20 lb (9.1 kg)
JBL Control 24CT. Control 24C with Transformer. For use on a 70.7V or 100V Distributed Line, Switchable Taps at 30W, 15W and 7.5W (Plus 3.7W at 70.7V only), No SonicGuard. Priced as Each, Packed as Pairs. Master Pack Quantity: 8 Pieces. Specifications:Active or PassivePassive with a multi-tap transformer for 70V or 100V systemsFrequency Response80 Hz to 20 kHzPower Capacity80 Watts Continuous Program Power40 Watts Continuous Pink NoiseNominal Sensitivity86 dB SPL 3.3' (1 m)Nominal Coverage Angle130° conical coverageDirectivityDirectivity Factor (Q): 2.4 averaged 500 Hz to 4 kHzDirectivity Index (DI): 3.8 averaged 500 Hz to 4 kHzMaximum Sound Pressure Level (SPL)102 dB 3.3' (1 m)ImpedanceNot applicableTransformer Taps70V: 30W, 15W, 7.5W & 3.7W taps100V: 30W, 15W, & 7.5W tapsLow Frequency Driver4" (100 mm) polypropylene-coated1" (25.4 mm) coil on aluminum formerHigh Frequency Driver0.75" (19 mm) titanium coated polyesterEnclosure MaterialBackcan: Formed steelBaffle/Rim: Medium impact polystyrene, fire rated UL94V-0TerminationRemovable locking connector with screw-down terminals2 input terminals and 2 loop-thru output terminalsMax. wire size 12 AWG (2.5 mm2)Safety RatingIn accordance with IEC60849 / EN60849Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90,NFPA70ACut-Out Size6.6" (168 mm)Dimensions (Diam. x H)7.7 x 7.9" (195 x 200 mm)7.2" (184 mm) front of ceiling tile to back of backcanWeight8 lb (3.5 kg) each
JBL Control 24C Micro. 4" Two-Way Ceiling Speaker, 15W Pink Noise, 30W Program Power Capacity. 8 ohms, Shallow 4" Back Depth. For Applications with Low Ceilings. Features Extremely Wide 150° coverage. Packaged with Backcan, Grille, Support Bracket and Tile Rails. Priced as Each, Packed as Pairs. Master Pack Quantity: 8 Pieces. Specifications:Active or PassivePassiveFrequency Response85 Hz - 25 kHzPower Capacity30 Watts (continuous program)15 Watts(continuous pink noise)Maximum Sound Pressure Level (SPL)94dB 1mNominal Sensitivity86dB SPL 1mTransformer TapsNoImpedance8 OhmsCrossover3.5kHzShieldedNoLow Frequency Driver4.5" (115 mm) IMG (injection molded graphite), 1" (24mm) Voice coilHigh Frequency Driver0.5" (12mm) polycarbonateEnclosure MaterialFormed SteelInput ConnectionsScrew-down terminals, touch-proof, UL, CE and VDE rated, outside of back canEnvironmentalIndoor onlyDimensionsOutside Dimensions: 4.2 x 7.7" (106 x 195mm)4.1" (105mm) (front of ceiling tile to back of the backcan)Weight3.6 lb (1.6 kg) eachSpecialties150° CoverageExtended High Frequency Reproduction
JBL Control 24C. 4" Two-Way Vented Ceiling Speaker, 80Hz - 20kHz, 86dB Sensitivity, 80W Program and 40W Pink Noise Power Capacity, SonicGuard Overload Protection, 16 ohms, 130° Coverage, Packaged with Backcan, Grille, Support Plate and Tile Rails. Priced as Each, Packed as Pairs. Master Pack Quantity: 8 Pieces. Specifications:Active or PassivePassiveFrequency Response80 Hz - 25 kHzPower Capacity80 Watts (continuous program)40 Watts(continuous pink noise)Maximum Sound Pressure Level (SPL)102dB 1mNominal Sensitivity86dB SPL 1mTransformer TapsNoImpedance16 OhmsCrossover3.5kHzShieldedNoLow Frequency Driver4" (100 mm) WooferHigh Frequency Driver0.75" (19mm) TweeterEnclosure MaterialFormed SteelInput ConnectionsScrew-down terminals, touch-proof, UL, CE and VDE rated, outside of back canEnvironmentalIndoor onlyDimensionsOutside Dimensions: 7.9 x 7.7" (200 x 195mm)7.2" (184mm) (front of ceiling tile to back of the backcan)Weight6 lb (2.7 kg) each
JBL Control 24CT Micro. Control 24C Micro with Transformer. For use on a 70.7V or 100V Distributed Line. Taps are 8W, 4W and 2W, 1W (and 1/2W at 70.7V only). Priced as Each, Packed as Pairs. Master Pack Quantity: 8 Pieces. Specifications:Active or PassivePassiveFrequency Response85Hz to 25kHzPower Capacity30 Watts Program (C24C Micro)15 Watts Pink Noise (C24C Micro)Maximum Sound Pressure Level (SPL)94dB 1m (3.3 ft), 8W tapNominal Sensitivity86dB SPL 1m (3.3 ft)Transformer Taps70V: taps: 30W, 15W, 7.5W, 3.7W100V: taps: 30W, 15W, 7.5WImpedanceNot applicableCrossover3.5kHzShieldedNot applicableLow Frequency Driver4.5 in. (115 mm) IMG (injection molded graphite), 1 in. (24mm) Voice coilHigh Frequency Driver0.5 in. (12mm) polycarbonateEnclosure MaterialFormed SteelInput ConnectionsScrew-down terminals, touch-proof, UL, CE and VDE rated, outside of back canEnvironmentalNot applicableDimensionsOutside Dimensions: (H x W) 4.2 x 7.7 in. (106 x 195mm)4.1 in. (105mm) front of ceiling tile to back of the back canWeight4.4 lb. (2.0kg) eachSpecialtiesMulti-tap transformer for 70V and 100V systems
JBL Control 26C. 6.5" Two-Way Vented Ceiling Speaker, 75Hz - 20kHz, 89dB Sensitivity, 150W Program and 75W Pink Noise Power Capacity, SonicGuard Overload Protection, 16 Ohms, 100° Coverage, Packaged With Backcan, Grille, Support Plate and Tile Rails. Priced as Each, Packed as Pairs. Master Pack Quantity: 4 Pieces. Specifications:Active or PassivePassiveFrequency Response75 Hz - 20 kHz(-10 dB)Power Capacity150 Watts Continuous Program75 Watts Continuous Pink NoiseMaximum Sound Pressure Level (SPL)107 dB SPL 1 mNominal Sensitivity89 dB SPL, 1W/1mImpedance16 OhmsCrossoverNot Specified by ManufacturerShieldedNoLow Frequency Driver6.5" Polypropylene-coated with 1" Voice CoilHigh Frequency Driver.75" Titanium-coated PolyesterEnclosure MaterialBackcan: Formed SteelBaffle/Rim: UL94V-O Fire-rated Medium-impact PolystyreneInput Connections2 x Removable Locking Inputs w/Screw-down Terminals2 x Removable Locking Loop-thru Outputs w/Screw-down TerminalsEnvironmentalHumidity-resistant woofer with polyurethane-covered cone and butyl-rubber surroundDimensions8.3 x 9.9" (210 x 252mm)(Height x Diameter)7.5" (190mm)(Front of ceiling tile to rear of backcan)8.75" (220mm)(Cutout Size)Weight7.5 lb (3.4 kg)SpecialtiesWide 110° CoverageHumidity Resistant Woofer Cone and Surround16 Ohhm Impedance, Loop-Thru for Parallel Connection
JBL Control 26CT. Control 26C with Transformer. For use on a 70.7V or 100V Distributed Line, Switchable Taps at 60W, 30W and 15W (Plus 7.5W at 70.7V only), No SonicGuard. Priced as Each, Packed as Pairs. Master Pack Quantity: 4 Pieces. Specifications:Active or PassivePassiveFrequency Response75Hz to 20kHzPower Capacity150 Watts Program 75 Watts Pink NoiseMaximum Sound Pressure Level (SPL)107dB 1m (3.3 ft)Nominal Sensitivity89dB SPL, 1W 1m (3.3 ft)Transformer Taps70 V taps: 60W, 30W, 15W, 7.5W 100 V taps: 60W, 30W, 15WImpedanceNot applicableCrossoverNot applicableShieldedNot applicableLow Frequency Driver6.5 in. (165 mm) Polypropelene-coated, 1" coil on aluminum formerHigh Frequency Driver3/4 in. (19 mm) Titanium coated polyesterEnclosure MaterialFormed steel can with medium impact polystyrene baffle/rim, fire rated UL94V-0Input ConnectionsRemovable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max. wire 12 AWG (2.5 mm2)EnvironmentalIn accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90, NFPA70ADimensions8.3 x 9.9 in. (210 x 252 mm) 7.5 in. (190 mm) front of ceiling tile to back of back canWeight7.5 lbs. (3.4 kg) CT: 10 lbs. (4.2 kg) eachSpecialtiesMulti-tap transformer for 70V and 100V systems
The full, high-quality sound of the compact JBL Control 24CT M-Plus Ceiling Speaker System is ideal for medium volume paging and background music applications including restaurants, professional offices and retail. Installation is possible without ceiling access and the built-in voltage transformer allows for additional speakers and system flexibility. Use the Control 24CT with other High/Mid response Control Contractor Systems to achieve a more flexible system capable of mixing and matching zones without separate equalization. Low frequencies may be augmented using a Control Contractor subwoofer. Specifications:Active or PassivePassiveFrequency Response85Hz to 25KHzPower Capacity30 Watts Program (C24C Micro)15 Watts Pink Noise (C24C Micro)Maximum Sound Pressure Level (SPL)94dB 1 m (3.3'), 8W tapNominal Sensitivity86dB SPL 1 m (3.3')Transformer Taps70V: taps: 30W, 15W, 7.5W, 3.7W100V: taps: 30W, 15W, 7.5WImpedanceNot applicableCrossover3.5KHzShieldedNot applicableLow Frequency Driver4.5" (115mm) IMG (injection molded graphite), 1" (24mm) Voice coilHigh Frequency Driver0.5" (12mm) polycarbonateEnclosure MaterialFormed SteelInput ConnectionsScrew-down terminals, touch-proof, UL, CE and VDE rated, outside of back canEnvironmentalNot applicableDimensionsOutside Dimensions: (H x W) 4.2 x 7.7" (106 x 195mm)4.1" (105mm) front of ceiling tile to back of the back canWeight4.4 lb (2.0kg) eachSpecialtiesMulti-tap transformer for 70V and 100V systems
JBL Control 29AV-1. High Output Indoor/Outdoor Monitor Speaker. 150W Pink Noise, 300W Program Power, 92 dB Sensitivity. 70V/100V Taps at 110W, 55W, & 28W (and 14W at 70V) plus 8 ohm Thru. 110° x 80° Coverage with Rotatable Horn. Built-In Invisiball Installation System, plus Ten M6 Suspension Points. Kevlar Cone Woofer and Titanium Compression Driver. Includes Sonicguard Overload Protection. Includes MTC-PC2 Sealed-Entrance Panel CoverSpecifications:Active or PassivePassiveFrequency Response40Hz to 19kHzPower Capacity300 Watts Continuous Program Power 150 Watts Continuous Pink NoiseMaximum Sound Pressure Level (SPL)120dB, Long-Term: 114dBNominal Sensitivity91dB, 1W 1m (3.3 ft)Transformer Taps70V: 110W, 55W, 28W & 14W 100V: 110W, 55W, & 28WImpedance8 ohmsCrossover3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequencyShieldedYes, as close as 9 in. to monitorLow Frequency Driver200 (8 in) kevlar cone with pure butyl rubber surround, 2 in. (50 mm) voice-coil on fiberglass formerHigh Frequency Driver1-in. (25-mm) compression driver, pure titanium diaphragm with patented JBL diamond surroundEnclosure MaterialHigh impact polystyrene cabinet with a thermoset composite coated steel grilleInput ConnectionsScrew-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).EnvironmentalIEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.Dimensions20.5 x 12.0 x 10.9 in. (520 x 306 x 277 mm)Weight26.8 lbs. (12.2 kg) eachSpecialtiesRotatable horn for either horizontal or vertical mounting
JBL Control 29AV-1 White. High Output Indoor/Outdoor Monitor Speaker. 150W Pink Noise, 300W Program Power, 92 dB Sensitivity. 70V/100V Taps at 110W, 55W, & 28W (and 14W at 70V) plus 8 ohm Thru. 110° x 80° Coverage with Rotatable Horn. Built-In Invisiball Installation System, plus Ten M6 Suspension Points. Kevlar Cone Woofer and Titanium Compression Driver. Includes Sonicguard Overload Protection. Includes MTC-PC2 Sealed-Entrance Panel Cover.Specifications:ctive or PassivePassiveFrequency Response40Hz to 19kHzPower Capacity300 Watts Continuous Program Power 150 Watts Continuous Pink NoiseMaximum Sound Pressure Level (SPL)120dB, Long-Term: 114dBNominal Sensitivity91dB, 1W 1m (3.3 ft)Transformer Taps70V: 110W, 55W, 28W & 14W 100V: 110W, 55W, & 28WImpedance8 ohmsCrossover3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequencyShieldedYes, as close as 9 in. to monitorLow Frequency Driver200 (8 in) kevlar cone with pure butyl rubber surround, 2 in. (50 mm) voice-coil on fiberglass formerHigh Frequency Driver1-in. (25-mm) compression driver, pure titanium diaphragm with patented JBL diamond surroundEnclosure MaterialHigh impact polystyrene cabinet with a thermoset composite coated steel grilleInput ConnectionsScrew-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).EnvironmentalIEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.Dimensions20.5 x 12.0 x 10.9 in. (520 x 306 x 277 mm)Weight26.8 lbs. (12.2 kg) eachSpecialtiesRotatable horn for either horizontal or vertical mounting
AKG GN 155 Set rugged all-metal gooseneck module,XLR connector,elegant floor stand.
Extremely light, inconspicuous mic with XLR connector for phantom powering
The EVID 4.2 is perfect for a variety of environments where full-range audio is needed in a limited space: restaurants, bars, bistros, department stores, and outdoor venues. The 4.2 offers the bass response of a much larger speaker, and dual, four-inch woofers make the 4.2 a phenomenal performer. Its one-inch waveguide-coupled, titanium tweeter delivers controlled, clean mids and highs. Combine it the 4.2 with the EVID 12.1 subwoofer for an amazing listening experience. Full system protection and EV's unique Strong-Arm Mount™ (SAM™) make the EVID 4.2 a solid choice for any environment.
The Electro-Voice® ZX1 is a high-performance, compact loudspeaker with a lightweight, durable, high-tech enclosure. The ZX1's enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low-frequency response without vent noise. The ZX1’s long excursion, high-output, eight-inch woofer with weather-treated cone delivers smooth, low-frequency performance with exceptional reliability.
The Culture Vulture Super 15 also showcases several inspired new features. The Drive switch has three positions with a +10dB option sitting squarely between ‘Normal’ and ‘Overdrive’, enabling users to make their sounds ‘a little more crunchy’ with increased brightness. Meanwhile, the Drive knob now goes all the way up to 15, rather than the decidedly more conservative Spinal Tap-favoured 11! The Function switch now offers further enhancements including special dynamic tunable mid-lift in the P positions and extra drastically-processed harmonics in the SQ positions. The new unit also has a two position Presence switch, as featured on Thermionic Culture’s popular Solo Vulture product. The Output Level controls have a -10dB attenuator which can be used in conjunction with Drive +10dB for comparison purposes or just to reduce high levels. The module’s line plus DI inputs are balanced while the line plus low level outputs are unbalanced. Five NOS military-grade valves are utilised for long life, low noise and enhanced performance, mirroring The Culture Vulture Mastering Plus Features Warm sounds gently or create a noise like a 200 watt guitar stack with all the drivers slashed.Independent channel operationOdd or even harmonic distortion, or combination of both.All valve design free from solid state additives.High impedance line input or instrument inputs.4 & 7 kHz filtersOverdrive & bypass switchesTransformer balanced inputs & outputs on stereo jacks.Transformer balanced rear mounted bypass switch.Large indented input Drive controls.Indented Output ControlsSpecially selected or military type valves with longer life and low microphony. Carefully matched 5725 distortion valves.
DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor. The DVA T12 features state-of-the-art neodymium speakers and high-performance digital amps with total of 1,410W output power. In combination with top-drawer DSP and premium-quality AD-DA transformers, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications. Weighing just 29 kg, this remarkably compact unit belies its unobtrusive look by enabling you to set up very powerful line arrays that deliver extraordinary performance.• Long-throw system• Fully powered three-way unit, freely scalable to setups of any size• Sequentially configurable array segments• High-end digital controller (DSP) on board• Network-ready with an integrated RDnet port• Hardware compatible with DVA T4 systemsSpecifications:Cabin Type Plastic Construction Type Active, 3-way Line Array Monitor Use - amplifier LF- 710W, MF-350W, HF-350W (Digital Class-D) LF/MF, Woofer 1x12'' neodymium woofer, 2x6.5'' Mid Horn Loaded HF, Horn 3 x 1'' neodymium compresion driver DSP Processor Yes, 8 preset Max SPL 136 dB Dispersion 100x10 Frequency Response 60 - 19.000 Hz Pole mount - Rigging Υes, to 20 cabins Connector XLR in/out, RD Net in/out Power 2 x PowerCon Dimensions 580 x 386 x 430 mm Weight 29.9 Kg Color Βlack
Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority.It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays.Thanks to the integrated Quick-Release-Pins, both DRK-10 and DRK-20 frames can be easily mounted to set up a ground stacked system.Specifications:Cabin Type Wood Function Active, subwoofer Monitor Use - Amplifier 3000 Watt LF/MF, Woofer 2 x 18'' HF, Horn - DSP Processor Yes Max SPL 141 dB Frequency Response 30 - 120 Hz Pole mount - Rigging 2xPick Points on top to fix DRK10/20 rigging frames Connector XLR/Speakon Dimensions 1100 x 580x 720 (W x H x D) Weight 83 kg Color Black
The EVID 4.2 is perfect for a variety of environments where full-range audio is needed in a limited space: restaurants, bars, bistros, department stores, and outdoor venues. The 4.2 offers the bass response of a much larger speaker, and dual, four-inch woofers make the 4.2 a phenomenal performer. Its one-inch waveguide-coupled, titanium tweeter delivers controlled, clean mids and highs. Combine it the 4.2 with the EVID 12.1 subwoofer for an amazing listening experience. Full system protection and EV's unique Strong-Arm Mount™ (SAM™) make the EVID 4.2 a solid choice for any environment.
The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly. The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements. However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. That’s how the effect of optimised SPL distribution is managed.Amplifier:Amp Technology Digital Class-T, var. clock frequencyAmp Class Class DHF Amp 100 WMF Amp 100 WLF Amp 220 WCooling ConvectionDimensions:· Width 580 mm (23.2 in)· Height 240 mm (9.6 in)· Depth 327 mm (13.08 in)· Weight 13.2 kg (29.1 lbs)Specifications:.Cabin Type Plastic Construction Type Active, 3-way Line Array Monitor Use - amplifier LF- 220W, MF-100W, HF-100W (Digital Class-D) LF/MF, Woofer 1x8'' neodymium woofer, 1x6.5'' Mid Horn Loaded HF, Horn 2 x 1'' neodymium compresion driver DSP Processor Yes, 8 preset Max SPL 128 dB Dispersion 100x15 Frequency Response 80 - 19.000 Hz Pole mount Υes, with DSA-4 stand (optional) Rigging Υes, to 16 cabine Connector XLR in/out Power 2 x PowerCon Dimensions 580 x 240 x 327 mm Weight 13.8 Kg Color ΒlackCabin Type Plastic Construction Type Active, 3-way Line Array Monitor Use - amplifier LF- 220W, MF-100W, HF-100W (Digital Class-D) LF/MF, Woofer 1x8'' neodymium woofer, 1x6.5'' Mid Horn Loaded HF, Horn 2 x 1'' neodymium compresion driver DSP Processor Yes, 8 preset Max SPL 128 dB Dispersion 100x15 Frequency Response 80 - 19.000 Hz Pole mount Υes, with DSA-4 stand (optional) Rigging Υes, to 16 cabine Connector XLR in/out Power 2 x PowerCon Dimensions 580 x 240 x 327 mm Weight 13.8 Kg Βlack Βlack - See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=131467#sthash.qPEEDXOD.dpufCabin Type Plastic Construction Type Active, 3-way Line Array Monitor Use - amplifier LF- 220W, MF-100W, HF-100W (Digital Class-D) LF/MF, Woofer 1x8'' neodymium woofer, 1x6.5'' Mid Horn Loaded HF, Horn 2 x 1'' neodymium compresion driver DSP Processor Yes, 8 preset Max SPL 128 dB Dispersion 100x15 Frequency Response 80 - 19.000 Hz Pole mount Υes, with DSA-4 stand (optional) Rigging Υes, to 16 cabine Connector XLR in/out Power 2 x PowerCon Dimensions 580 x 240 x 327 mm Weight 13.8 Kg Βlack Βlack - See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=131467#sthash.qPEEDXOD.dpufCabin Type Plastic Construction Type Active, 3-way Line Array Monitor Use - amplifier LF- 220W, MF-100W, HF-100W (Digital Class-D) LF/MF, Woofer 1x8'' neodymium woofer, 1x6.5'' Mid Horn Loaded HF, Horn 2 x 1'' neodymium compresion driver DSP Processor Yes, 8 preset Max SPL 128 dB Dispersion 100x15 Frequency Response 80 - 19.000 Hz Pole mount Υes, with DSA-4 stand (optional) Rigging Υes, to 16 cabine Connector XLR in/out Power 2 x PowerCon Dimensions 580 x 240 x 327 mm Weight 13.8 Kg Βlack Βlack - See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=131467#sthash.qPEEDXOD.dpuf
The DVA S08 is a remarkably compact 12“ high power active bass-reflex subwoofer for professional applications and to satisfy upmarket requirements. It delivers a high momentum and at the same time reproduces a punchy low end. Equipped with a 800W/RMS digipro digital power amp including switch mode supply, this unit provides a high sound pressure level of up to 131dB. Furthermore there is a powercon in- and out for mains connection.Specifications:Cabin Type Wooden Construction Type Active subwoofer Bass Reflex amplifier 800W Class-D LF/MF, Woofer 12'' neodymium (woofer) HF, Horn - DSP Processor - crossover Max SPL 131 dB Dispersion Omnidirectional Frequency Response 40Hz-150Hz Pole mount Yes Rigging - Connector 2x XLR in, 2 x XLR out Power 1x PowerCon in, 2 x PowerCon out Dimensions 520x360x500mm Weight 22 Kg Color Black
A remarkably compact 15“ subwoofer in a band-pass design, the DVA S09 DP delivers true, tight, and punchy bass response.With a height of just 44 cm, it can be flown above DVA T4 modules to keep the rig‘s footprint inconspicuous.The S09 comes with two features that make it the perfect base for a high-quality satellite system, for example, when paired with the DVX D10.One is an integrated active stereo crossover with two cutoff frequencies to choose from,90Hz and 120Hz.The other is a phase inversion switch.One PowerCon socket connects to the mains power supply, while two PowerCon outputs connect satellites.Specifications:Cabin Type Wood Function Active, subwoofer Monitor Use - Amplifier 1000 Watt LF/MF, Woofer 15'' HF, Horn - DSP Processor Yes Max SPL 134 dB Frequency Response 45 - 120 Hz Pole mount 1x M20 Rigging 2xPick Points on top to fix DRK10/20 rigging frames Connector XLR/Speakon Dimensions 515 x 440 x 720 (W x H x D) Weight 37.5 kg Color Black
The bandpass subwoofer DVA S10 is equipped with a single 18“ woofer of the newest generation, driven by a 1000W digitalpower amp.Using the optionally available flyware, up to two DVA S10DP can be flown mounted to the DRK-10 rigging kit.Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack.Specifications:Cabin Type Wood Function Active, subwoofer Monitor Use - Amplifier 1000 Watt LF/MF, Woofer 18'' HF, Horn - DSP Processor Yes Max SPL 136 dB Frequency Response 40 - 120 Hz Pole mount 1x M20 Rigging integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames Connector XLR/Speakon Dimensions 515 x 640 x 720 (W x H x D) Weight 48 kg Color Black
Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority.It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays.Thanks to the integrated Quick-Release-Pins, both DRK-10 and DRK-20 frames can be easily mounted to set up a ground stacked system.
The DVX DM28 excels at rendering speech and vocals. Users’ search for natural response, dynamic balance, and high SPL in a compact, inconspicuous package ends with this stage monitor.Specifications:Cabine Type Wooden Construction Type Αctive monitor 2-way Monitor Use Yes Amplifier LF-500W, HF-250W Digital Class-D LF/MF, Woofer 2 x 8'' neodymium (woofer) HF, Horn 1'' neodymium compresion driver DSP Processor Yes, preset , Full Range and Monitor Max SPL 130 dB Dispersion 90x60 (40) Frequensy Response 70 - 19.000 Hz Pole mount - Rigging - Connector XLR in/out Power PowerCon Dimensions 480x265x418mm Weight 14 Kg Color Black
The DVX DM12 is an active bi-amped stage monitor. Powerful, assertive, and engineered for professional applications, it is the perfect choice for midsized to large stagesSpecifications:Cabine Type Wooden Construction Type Active monitor 2way Monitor Use Υes Amplifier LF-500W, HF-250W Digital Class-D LF/MF, Woofer 1x12'' HF, Horn 1,4'' neodymium compresion driver DSP Processor Υes, preset , FOH and Monitor Max SPL 131 dB Dispersion 90x40 (Rotatable) Frequensy Response 68 - 19.000 Hz Pole mount Υes Rigging Yes, 6 x M8 Connector XLR in/out Power PowerCon Dimensions 660x305x378mm Weight 17.5 Kg Color Black
The DVX DM15 is a low-profile stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that requirepowerful low-end performance without added subwoofers.Specifications:Cabine Type Wooden Construction Type Active monitor 2-way Monitor Use Yes Amplifier LF-500W, HF-250W Digital Class-D LF/MF, Woofer 1x15'' HF, Horn 1,4'' neodymium compresion driver DSP Processor Yes, preset , FOH and Monitor Max SPL 132 dB Dispersion 90x40 (Rotatable) Frequensy Response 59 - 19.000 Hz Pole mount Yes Rigging Yes, 6 x M8 Connector XLR in/out Power PowerCon Dimensions 734x338x442mm Weight 21 Kg Color Black
The Flexsys F8 is a two-way mid-/high-range unit designed especially for use in a fully active configuration with added subwoofers. Loaded with an 8” woofer and a 1“ driver, it delivers clear, richly detailed response across the midrange and top end.Specifications:Cabine Type: Wooden Construction Type: Αctive speaker, 2-way Monitor: Yes Αmplifier: LF-150W, HF-50W, Class-DLF/MF, Woofer: 8'' HF, Horn: 1in (compression driver)DSP Processor: Yes, preset για, Flat καιProcessed καιdual active limiter Max SPL: 121 dB Dispersion: 60x90/40 (Rotatable) Frequency Response: 90Hz-19KHz Pole mount: Yes Rigging: 10 x M8 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 260x420x260mm Weight: 9.5 Kg Color: Βlack
The F10 not only offers the best size-to-performance ratio, it is also very versatile. Sporting a 10“ woofer, it can also serve as a fullrange enclosure for smaller applications.Specifications:Cabine Type: Wooden Construction Type: Active Speaker 2-way Monitor: Yes Αmplifier: LF-150W, HF-50W, Class-DLF/MF, Woofer: 10'' HF, Horn: 1in (compression driver) DSP Processor: Yes, preset for, Flat and Processed and dual active limiterMax SPL: 125 dB Dispersion: 60x90/40 (Rotatable) Frequency Response: 80Hz-19KHz Pole mount: Yes Rigging: 10 x M8 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 300x483x300mm Weight: 12 Kg Color: Black
The two-way enclosure loaded with a 12“ speaker is so frequently used for sound reinforcement applications that it has become a de facto standard. Specifications:Cabine Type: Wooden Construction Type: Αctive speaker, 2-way Monitor: Yes Αmplifier: LF-300W, HF-100W, Class-D LF/MF, Woofer: 12''HF, Horn: 1in (compression driver) DSP Processor: Υes, preset for, Flat and Processed and dual active limiter Max SPL: 127 dB Dispersion: 90x40 (Rotatable) Frequency Response: 75Hz-19KHz Pole mount: Yes Rigging: 12 x M10 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 360x610x360mm Weight: 16.5 Kg Color: Βlack
Designed especially for use as a fullrange cabinet, the Flexsys F15 delivers the sonic goods. There’s no need for an added subwoofer as its 15“ woofer packs a very powerful low-end punch.Specifications:Cabine Type: Wooden Construction Type: Active Speaker 2-way Monitor: Yes Αmplifier: LF-300W, HF-100W, Class-D LF/MF, Woofer: 15'' HF, Horn: 1in (compression driver) DSP Processor: Yes, preset for, Flat and Processed and dual active limiter Max SPL: 128 dB Dispersion: 90x40 (Rotatable) Frequency Response: 60Hz-19KHz Pole mount: Υes Rigging: 12 x M10 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 430x680x430mm Weight: 20 Kg Color: Βlack
The F212 is an active two-way system with considerable reach. A very efficient and powerful mid-/high-range unit, it was designed to be combined with active subwoofers to construct high-performance PA systems.Specifications:Cabine Type: Wooden Construction Type: Active, 2-way Monitor: - Αmplifier:LF-500W, HF-250W, Class-D LF/MF, Woofer: 2x12'' HF, Horn: 1in (compression driver) DSP Processor: Yes, preset for, Flat and Processed and dual active limiter Max SPL: 132 dB Dispersion: 60x40 (Rotatable) Frequency Response: 65Hz-19KHz Pole mount: Yes Rigging: 12 x M10 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 360x930x500mmWeight: 31.5 Kg Color: Black
The F315 is an active three-way system designed to render the full frequency range. Powerful and assertive, it delivers the sonic goods without requiring an added subwoofer.Specifications:Cabine Type: Wooden Construction Type: Αctive Speaker 3-way Monitor: - Αmplifier:LF-500W, HF-500W, Class-D LF/MF, Woofer: 1x15in, 1x6,5in hornloaded HF, Horn: 1in (compression driver) DSP Processor: Υes, preset for, Flat and Processed and dual active limiter Max SPL: 131 dB Dispersion: 90x40 (Rotatable) Frequency Response: 60Hz-19KHz Pole mount: Υes Rigging: 12 x M10 Connector: XLR in/out Reception power: IEC, VDE Dimensions: 440x880x500mm Weight: 31 Kg Color: Black
The CXT-112 houses a 12' woofer and a Piezo dynamic horn in a trapezoidal cabinet design with specifically designed internal bracing and is capable of handling 200W RMS/800W Peak power handling.Specifications:Type: Passive, 2-way Power: 200W RMS / 800W PeakΙmpedance: 8 Ohm Frequency Response: 60Hz - 20kHz Sensitivity: 96 (1W/1m) Woofer: 12'' Τweeter: Piezo dynamic corn Dimensions (W x H x D): 39,7 x 55,5 x 38,4 (cm)Weight: -
