MENU
Αναζήτηση
Filters
This special version of the CCM 3 Lg compact microphone is equipped with a flange enabling it to be built into the surface of a table or speaker's rostrum. This makes the microphone nearly invisible, and at the same time improves the sound quality by eliminating comb filter effects.Features:Hemispherical pickup patternFor building in to the surface of a table or lecternUnobtrusiveAvoids “comb filter” effectSpecifications:Current consumption with 12 V: 8 mACurrent consumption with 48 V: 4 mAImpedance: 90 ΩMinimum recommended load impedance: 600 ΩLow-cut frequency: 20 HzLength (L version): without connector: 46 – 58 mmLength (U version): 46 – 58 mmDiameter: 20 mmWeight (U-version): 33 gWeight (L-version): 43 gSurface finish: matte gray
If this microphone is used indoors at medium recording distances (i.e. where direct sound energy is similar in amount to reflected sound energy), its overall response will be linear. Its extended frequency response and low noise make it appropriate for the most demanding applications.The sound inlet of the CCM 2H is narrower than that of our other pressure transducers, causing a slight, purely acoustic response elevation above 6 kHz. This reduces the high frequency loss for diffuse sound, thus helping to preserve natural sound quality.Features:Omnidirectional patternMild high-frequency rise to compensate for losses at medium recording distanceOften chosen for “spaced microphone” stereo pickup and “Decca Tree” arrangementsSpecifications:Current consumption with 12 V: 8 mACurrent consumption with 48 V: 4 mAImpedance: 90 ΩMinimum recommended load impedance: 600 ΩLow-cut frequency: 20 HzLength (L version): without connector: 46 – 58 mmLength (U version): 46 – 58 mmDiameter: 20 mmWeight (U-version): 33 gWeight (L-version): 43 gSurface finish: matte gray
The MK 2S exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight rolloff of high frequencies off axis and in the reverberant sound field.The frequency response characteristic of the CCM 2S falls between that of the CCM 2 and the CCM 3, making this microphone suitable for a wide range of applications.Features:Omnidirectional patternSlight high-frequency rise to compensate for losses at moderate recording distancesFor a very wide range of recording applicationsOften preferred for “spaced microphone” stereo pickup and “Decca Tree” arrangementsSpecifications:Current consumption with 12 V: 8 mACurrent consumption with 48 V: 4 mAImpedance: 90 ΩMinimum recommended load impedance: 600 ΩLow-cut frequency: 20 HzLength (L version): without connector: 46 – 58 mmLength (U version): 46 – 58 mmDiameter: 20 mmWeight (U-version): 33 gWeight (L-version): 43 gSurface finish: matte gray
The Schoeps V4 USM Set contains the V4 U Studio Vocal Microphone, the USM-V4 Elastic Suspension and a wooden case. The blue V4 U Studio Vocal Microphone features a small-diaphragm capsule with a beveled collar for controlling the polar response. It has a warm, clear sonic character with a smoothly rolled-off diffuse-field response.Specifications:Polar Pattern: CardioidFrequency Range: 50 Hz to 22 kHzSignal to Noise Ratio: 79 dB A-WeightedEquivalent Noise Level: 15 dB A-Weighted25 dB CCIRMaximum SPL: 144 dB SPL 0.5%Impedance: 600 ohmsSensitivity: 16 mV/PAPower Requirements: 48 VOperating Current Consumption: 3.3 µA
The V4 U is the studio vocal microphone by SCHOEPS. It unites the outstanding technical characteristics typical of SCHOEPS with a timeless, classic design. The “look” of the V4 U is based on the SCHOEPS CM 51/3 from 1951. But the V4 U is a thoroughly modern studio microphone. Its capsule, circuitry and mechanical construction are the result of extensive new development.Features:Studio Vocal MicrophoneNew small-diaphragm capsule architecture, with bevelled collar for controlling the polar response.Warm, clear sonic character with smoothly rolled-off diffuse-field response.Capsule head with adjustable tilt angle.Optimal on-axis frequency response featuring a mild high-frequency lift.Very smooth polar response; carefully-controlled narrowing of the pattern at high frequencies.Diffuse-field response parallel to the 0 ° response, with a gentle roll-off at high frequencies.Newly designed electronics offer a very high maximum sound pressure level.Specifications:Directional pattern: CardioidFrequency range: 50 Hz - 22 kHzSensitivity: 16 mV/PaEquivalent noise level (A-weighted): 15 dB-AEquivalent noise level (CCIR): 25 dBSignal-to-noise ratio (A-weighted): 79 dB-AMaximum sound pressure level at 0.5% THD: 144 dB-SPLMaximum output voltage: 4.8 VLow-cut frequency: 40 HzPowering voltage: 48 VCurrent consumption: 3.3 mALength: 194 mmWeight: 302 g
The gray V4 SGV Set from Schoeps contains a V4 U Studio Vocal Microphone, a wooden case, and an SGV stand clamp. The base of the SGV stand clamp has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. The angle can be varied continuously in the vertical plane.The V4 U Studio Vocal Microphone features a small-diaphragm capsule architecture with a beveled collar for controlling the polar response. It has a warm, clear sonic character with smoothly rolled-off diffuse-field response.Specifications:Polar Pattern: CardioidFrequency Range: 50 Hz to 22 kHzSignal to Noise Ratio: 79 dB A-WeightedEquivalent Noise Level: 15 dB A-Weighted25 dB CCIRMaximum SPL: 144 dB SPL 0.5%Impedance: 970 ohmsSensitivity: 16 mV/PAPower Requirements: 48 VOperating Current Consumption: 3.3 µAGeneralLength: 7.64" (194 mm)Diameter: 1.34" (34 mm)Weight: 0.66 lb (302 g)
The TLM 103* is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget.By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. Delivery includes the EA 1 'spider' mount.
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload.Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 4 x 250WRMS power @ 8 Ohm Stereo: 4 x 130WRMS power @ 8 Ohm Bridge: 2 x 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 438 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg
Computer music meets hi-fi sound. That’s what the DAC 2 Wireless USB Digital-to-Analogue Converter is all about. Our super simple and fun solution lets you listen to any music stored on or streamed to your computer on your high performance NAD hi-fi system. Point-to-point wireless technology means you can just plug in the two-piece DAC 2 and start enjoying computer audio, including 24/96 music files without compression, with the least amount of fuss.Anything your computer can do, we can do better.You no longer have to pick your computer over your audio system when it comes to listening to your favourite digital tunes, Internet radio, or cloud services like Rdio, Spotify, Pandora, Last.fm, and Slacker. Spoil yourself with better sound quality and more control over your music choices. Streaming of HD audio files from your computer to your Hi-Fi is now simple. The DAC 2 includes everything you need to enjoy 24/96 studioquality music now.Wireless High Resolution SoundThe NAD DAC 2 becomes the sound card for your computer, and with 24 bit 96kHz digital capability anything you can hear on your PC, including Studio Quality HD Audio, is digitally transmitted to your Hi-Fi! To enhance your experience there are several smartphone apps available to remotely operate your PC or Mac and deliver the rich user interface of the computer right to your fingertips. You don’t need a Wi-Fi network to enjoy Computer Audio at its finest.Musical SoundTo achieve the best possible sound, the Transmitter digitally transmits the audio from your Mac or PC to the DAC 2 Receiver, which then converts the digital signal to analogue using premium parts like Burr-Brown OPAmps and 24/192 Delta-Sigma DACs with selected passive components in a proprietary NAD circuit. There is also a coax digital output that allows connection to AVRs or outboard DACs.Quality and AffordabilityOur attention to detail and use of premium parts in the DAC 2 represents unusually good value. The DAC 2 is an easy and economical option that promises to boost the enjoyment of your existing component system. The DAC 2 brings a whole new world of musical experience and choice to your hi-fi experience. Specifications:USB: 2.0Analogue: 2 x RCA JacksDigital: 1 x Coaxial RC JackSample Rate: 96kHz/24bitTHD+N: 0.05% (ref 0dBFS)Signal to Noise: >-80dBAnalogue Output Level : 2VCoax SPDIF: 500mV ± 50mVFrequency Response: 20Hz to 48kHz ±0.5dBDigital-to-Analogue Converter: Delta-Sigma DACTime Delay:
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Stereo: 2 x 130WRMS power @ 8 Ohm Bridge: 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Power consumption: 224 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.4 Kg
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 500WRMS power @ 8 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Bridge: 1000WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1% Crosstalk > 70 dBCrosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Operating Temperature: 0° ~ 40° C at 95% humidityPower consumption: 426 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability.Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 150WRMS power @ 8 Ohm Stereo: 2 x 80WRMS power @ 8 Ohm Bridge: 300WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - inputs: XLR input & signal linkthroughConnectors - outputs: Speakon compatible & 2-pin terminal block (5.08 mm)Power consumption: 145 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mm
The Meze 99 Classics promises to deliver perfect natural sound even to the pickiest of audio lovers. The walnut wood earcups, soft earpads, and the spring steel headband will make the 99 Classics an heirloom rather than just a pair of headphones.Just like finger prints, wood grain is as unique, thus making each pair of Meze Headphone a one of a kind. You will love how they feel in your hands. Sturdy built and precise assembly. The ear cups are made with a satin finished wood grain. Put them on, sit back, and enjoy your favorite sound of plucked strings, upbeat grooves or thumping beats while still looking classyWe're taking headphone design to a new level by combining modern with hand crafted design, using natural materials and focusing on delivering the best premium soundOur aim is to change the perception of headphones as technical devices or as cheap plastic accessories and create a mature product to fall in love withWe aimed for perfection in every component we designed. CNC carved wood ear cups, cast zinc alloy hardware with electroplated coating, stamped manganese spring steel headband, memory foam and soft PU leather are the materials your hands and eyes will get to enjoy. No plastic here for you to see.Besides the usual warranty everybody is offering, we guarantee that the 99's are endlessly serviceable if any parts would ever need to be replaced because we built these headphones to lastSpecifications:Transducer size: 40mmFrequency response: 15Hz - 25KHzSensitivity: 103dB at 1KHz, 1mWImpedance: 32OhmRated input power: 30mWMaximum input power: 50mWDetachable Kevlar OFC cablePlug: 3.5mm gold platedWeight: 260 gr (9.2 ounces) without cablesEar-cups: walnut wood
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectorsSpecifications:RMS power @ 4 Ohm Stereo: 4 x 100WRMS power @ 8 Ohm Stereo: 4 x 50WRMS power @ 8 Ohm Bridge: 2 x 200WFrequency Response: 20 Hz - 20 kHzSignal to Noise ratio: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 188 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mm
A Digital DJ looking for a professional, durable case solution for your Novation Circuit controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit controllers, these cases are perfect for the travelling DJ that needs to protect their equipment. Specifications:Color: BlackWeight: 0,54 kg / 1.188 lbsOuter Dimensions: cm: 24 x 20 x 5 | inch: 9.45 x 7.87 x 1.97Inner Dimensions: Not ApplicableMaterial: Durashock molded EVA foamProtection: Soft fleece interiorExtra's: Heavy-duty handle Convenient carry handle Easy grip zipper pullerFits: Novation Circuit Controller
A Digital DJ looking for a professional, durable case solution for your CDJ/ DJM/ Battle Mixers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the CDJ/ DJM/ Battle Mixers, these cases are perfect for the travelling DJ that needs to protect their equipment. Specifications:Color: BlackWeight: 1,54 kg / 3.388 lbsOuter Dimensions: cm: 46 x 39 x 13.5 | inch: 18.1 x 15.3 x 5.3Inner Dimensions: Not ApplicableMaterial: Durashock molded EVA foamProtection: Adjustable EVA padding to customize main compartment to your gearExtra's: Heavy-duty handle Convenient shoulder strap Easy grip zipper pullerFits: Pioneer CDJ-2000NXS2/ DJM-900NX2/ XDJ-1000MK2/ CDJ-900NXS Rane Sixty Eight/ Sixty Four Allen & Heath Xone 43 C or similar size mixers and cd players
A Digital DJ looking for a professional, durable case solution for your Akai MPC Touch controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC Touch controllers, these cases are perfect for the travelling DJ that needs to protect their equipment. Specifications:Color: BlackWeight: 0,65 kg / 1.43 lbsOuter Dimensions: cm: 45.9 x 26.2 x 6.3 | inch: 18 x 10.3 x 2.4Inner Dimensions: Not ApplicableMaterial: Durashock molded EVA foamProtection: Soft fleece interiorExtra's: Heavy-duty handle Convenient carry handle Easy grip zipper puller
The M8 is a pre-amplifier without limits. From its performance to its connectivity, via quality fit and finish, the M8 makes a superlative centrepiece for almost any system. The M8 has a wide array of inputs including a low noise MM/MC phono stage, 2 balanced inputs (1 with home theatre bypass option), 3 line inputs (one with home theatre bypass option) and a fully configured tape in/out loop.The M8 Pre-amp has very high input overload margins. This means that it has a completely stress free sound. The outputs are very low impedance and high current so that it can drive virtually any power amp in existence through any length cable (balanced or single ended).Technical measurements are testament to the M8’s exceptional engineering: from ultra-low distortion to virtually perfect frequency response, and ultra low noise. The M8’s will drive any power amplifier over any length of cable. Although, obviously, it’s perfect partner is a pair of M8-700m monobloc amplifiers.Listening to the M8 Pre with the M8-700m monobloc is quite an experience. The music is reproduced with no stress, no colouration and sense of relaxation and transparency that are music to the ears and balm to the soul.Features:Genuinely fully balanced preampEight versatile inputs – 1 XLR Balanced, switchable MM/MC Phono, CD, Tuner, Aux 1, Aux 2, TapeSingle ended and balanced outputs as well as a fixed output for tape recordHome theatre bypass available in both single ended and balanced inputsOutstanding cutting edge performanceAmazing load driving ability, will easily drive any power amplifier with any cable of almost any lengthExcellent design, he-man build qualitySpecifications:THD(+ noise) - single ended:
The M6scd is a superb performer. It uses a 32 bit DAC with 192 kHz up-sampling and delivers outstanding technical and musical performance. It also has a range of digital inputs: 2 x coax, 2 x optical and asynchronous USB. This makes it particularly useful for set top boxes and/or TV sound improvement.The M6scd is a top notch CD player and digital hub in one beautifully engineered box.Features:CD player and digital hubExcellent technical performanceGreat CD readabilityMultiple digital inputs – 2 x coax, 2 x optical, and asynchronous USBVery low jitterExcellent, hunky build qualitySpecifications:Jitter: 117dBTHD(+ noise):
The M6scd is a superb performer. It uses a 32 bit DAC with 192 kHz up-sampling and delivers outstanding technical and musical performance. It also has a range of digital inputs: 2 x coax, 2 x optical and asynchronous USB. This makes it particularly useful for set top boxes and/or TV sound improvement.The M6scd is a top notch CD player and digital hub in one beautifully engineered box.Features:CD player and digital hubExcellent technical performanceGreat CD readabilityMultiple digital inputs – 2 x coax, 2 x optical, and asynchronous USBVery low jitterExcellent, hunky build qualitySpecifications:Jitter: 117dBTHD(+ noise):
The M3scd has been designed to give outstanding CD reproduction and to be a digital hub.In addition to CD it has 3 digital inputs: coax, optical and asynchronous USB. This makes it particularly useful for set top boxes and/or TV sound improvement. The technical performance is excellent; it has very low distortion, extremely low jitter, excellent signal-to-noise ratio, extremely flat frequency response, exemplary linearity and excellent channel separation.All in all the M3scd gives excellent CD replay and can act as a versatile digital hub at the same time.Features:CD player and digital hubExcellent technical performanceVery good CD readabilityMultiple digital inputs - coax, optical and asynchronous USBVery low jitterSpecifications:Jitter: 117dBTHD(+ noise):
The M3scd has been designed to give outstanding CD reproduction and to be a digital hub.In addition to CD it has 3 digital inputs: coax, optical and asynchronous USB. This makes it particularly useful for set top boxes and/or TV sound improvement. The technical performance is excellent; it has very low distortion, extremely low jitter, excellent signal-to-noise ratio, extremely flat frequency response, exemplary linearity and excellent channel separation.All in all the M3scd gives excellent CD replay and can act as a versatile digital hub at the same time.Features:CD player and digital hubExcellent technical performanceVery good CD readabilityMultiple digital inputs - coax, optical and asynchronous USBVery low jitterSpecifications:Jitter: 117dBTHD(+ noise):
The M8-500s can drive just about any loudspeaker you choose. It is, of course, the perfect partner/visually and sonically for the M8 preampHowever some customers do not have the space for two large monoblocs and do not necessarily need that much power. For them we have designed the M8-500s. Pairing it with the matching M8 Preamp gives an amplification system fit of the highest levels of reproduction.The unit features two monoblock high current bridged amplifiers with generous supplies for the absolute best in transients and dynamics. With their high output current rating, these are enough to drive even the most demanding loudspeakers with ease.Low distortion and very quiet they will deliver all music types exactly as the artist originally intended. The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, wide bandwidth and dynamic range, with extraordinary resolution and fine detail. Specifications:Power output: 500 Watts per channel into 8 Ohms (27 dBW)THD(+ noise): 120dB 'A' weightedFrequency Response: +0, –1dB, 10Hz to 80kHz1x RCA Phono Line Level1x Line level XLR Balanced1x Trigger input 3.5mm (⅛”) mono jack ±4.5 to ±15V DC1x RCA Phono Line Level (loop output)1x Line level XLR Balanced (loop output)1x Trigger output 3.5mm (⅛”) mono jack 12V DCDimensions - WxHxD (mm): 440 x 160 x 460Weight (unpacked / packed): 29 kg / 34.5 kg
A Digital DJ looking for a professional, durable case solution for your Ableton Push 2 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road.Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Ableton Push 2 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment. Specifications:Color: BlackWeight: 0,83 kg / 1.826 lbsOuter Dimensions: cm: 41.2 x 32.5 x 6 | inch: 16.2 x 12.8 x 2.4Inner Dimensions: Not ApplicableMaterial: Durashock molded EVA foamProtection: Soft fleece interiorExtra's: Heavy-duty handle Convenient carry handle Easy grip zipper pullerFits: Ableton Push 2 Controller
The M8-500s can drive just about any loudspeaker you choose. It is, of course, the perfect partner/visually and sonically for the M8 preampHowever some customers do not have the space for two large monoblocs and do not necessarily need that much power. For them we have designed the M8-500s. Pairing it with the matching M8 Preamp gives an amplification system fit of the highest levels of reproduction.The unit features two monoblock high current bridged amplifiers with generous supplies for the absolute best in transients and dynamics. With their high output current rating, these are enough to drive even the most demanding loudspeakers with ease.Low distortion and very quiet they will deliver all music types exactly as the artist originally intended. The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, wide bandwidth and dynamic range, with extraordinary resolution and fine detail. Specifications:Power output: 500 Watts per channel into 8 Ohms (27 dBW)THD(+ noise): 120dB 'A' weightedFrequency Response: +0, –1dB, 10Hz to 80kHz1x RCA Phono Line Level1x Line level XLR Balanced1x Trigger input 3.5mm (⅛”) mono jack ±4.5 to ±15V DC1x RCA Phono Line Level (loop output)1x Line level XLR Balanced (loop output)1x Trigger output 3.5mm (⅛”) mono jack 12V DCDimensions - WxHxD (mm): 440 x 160 x 460Weight (unpacked / packed): 29 kg / 34.5 kg
The M8 is a pre-amplifier without limits. From its performance to its connectivity, via quality fit and finish, the M8 makes a superlative centrepiece for almost any system. The M8 has a wide array of inputs including a low noise MM/MC phono stage, 2 balanced inputs (1 with home theatre bypass option), 3 line inputs (one with home theatre bypass option) and a fully configured tape in/out loop.The M8 Pre-amp has very high input overload margins. This means that it has a completely stress free sound. The outputs are very low impedance and high current so that it can drive virtually any power amp in existence through any length cable (balanced or single ended).Technical measurements are testament to the M8’s exceptional engineering: from ultra-low distortion to virtually perfect frequency response, and ultra low noise. The M8’s will drive any power amplifier over any length of cable. Although, obviously, it’s perfect partner is a pair of M8-700m monobloc amplifiers.Listening to the M8 Pre with the M8-700m monobloc is quite an experience. The music is reproduced with no stress, no colouration and sense of relaxation and transparency that are music to the ears and balm to the soul.Features:Genuinely fully balanced preampEight versatile inputs – 1 XLR Balanced, switchable MM/MC Phono, CD, Tuner, Aux 1, Aux 2, TapeSingle ended and balanced outputs as well as a fixed output for tape recordHome theatre bypass available in both single ended and balanced inputsOutstanding cutting edge performanceAmazing load driving ability, will easily drive any power amplifier with any cable of almost any lengthExcellent design, he-man build qualitySpecifications:THD(+ noise) - single ended:
The entry-level DAC Box E is an excellent D/A converter for digital sound sources using optical and coaxial connections. Despite the low price, it sounds outstanding and supports HD music data up to 24/192kHz. DAC Box E uses high quality components like precision D/A converter chips and a low noise output stage. It will act as a perfect upgrade for any digital stereo audio source, especially for best-buy CD-players, Bluray or DVD players with CD playback, set-top boxes etc! The whole audio circuitry design is perfectly linear with low output impedance to avoid any negative interference with cables or pre-amps. Its class-leading audio performance makes DAC Box E an outstanding low-cost audio bargain! Features:24bit / 192kHz D/A conversion Co-axial (RCA) & optical (Toslink) S/PDIF input SMD circuitry Special low noise components Internal metal shielding Small size allows installation close to source Gold plated RCA connection sockets Outboard power supply included Specifications:Line-level output: 1 pair RCA/phono socketsOutput voltage: 0,7VrmsDigital inputs: 1x coaxial (S/PDIF), 1x optical (TOSlink®)D/A converter: Texas Instruments TLV320DAC23 Cirrus Logic CS4344. 24Bit/192kHzSupported audio format: PCM (LPCM) (Stereo only, no support for multi-channel formats)Sampling rates Optical and coaxial input: 44,1kHz, 48kHz, 96kHz and 192kHz (coaxial only)Outboard power supply: 18V/500mA DCPower consumption: 200mA DC,Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mmWeight: 250g without power supply
Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry-level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier. Features:Amplification and RIAA equalisation for MM cartridges Design principle inspired by Dr. Sykora SMD circuitry Special low noise components Internal metal shielding Small size allows installation close to record player Gold plated RCA connection sockets Outboard power supply includedSpecifications:Input impedance: 47kohmsInput capacitance: 120pFGain: 40dBOutput voltage(typically): 500mV @ 1KhZ with 5mV inputNoise floor: 88dB (A weighted)THD:
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Re-cord Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry-level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisin-gly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier. Features:Amplification and RIAA equalisation for MM & MC Design principle inspired by Dr. Sykora Digitalisation of vinyl for recording direct to USB with suitable recording programs Automatic recognition, no additional drivers needed Runs on Windows®, Mac OS® & Linux operating systems SMD circuitry with special low noise components Internal metal shielding Small size allows installation close to record player Gold plated RCA connection sockets Outboard power supply included White casing Specifications:Input capacitance/input impedance: MC: 100ohms/120pF (low output MC)-MM: 47kohms/120pF (MM or high output MC)Gain, MM / MC: 40dB / 60dBOutput voltage typically: 300mV/1kHz at 3mV/1kHz (MM) or 0,3mV/1kHz (MC)Max. output: 9,5V (1kHz)Noise floor MM / MC: 94dB (A weighted) / 75dB (A weighted)THD MM / MC:
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Re-cord Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry-level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisin-gly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier. Features:Amplification and RIAA equalisation for MM & MC Design principle inspired by Dr. Sykora Digitalisation of vinyl for recording direct to USB with suitable recording programs Automatic recognition, no additional drivers needed Runs on Windows®, Mac OS® & Linux operating systems SMD circuitry with special low noise components Internal metal shielding Small size allows installation close to record player Gold plated RCA connection sockets Outboard power supply included Black casing Specifications:Input capacitance/input impedance: MC: 100ohms/120pF (low output MC)-MM: 47kohms/120pF (MM or high output MC)Gain, MM / MC: 40dB / 60dBOutput voltage typically: 300mV/1kHz at 3mV/1kHz (MM) or 0,3mV/1kHz (MC)Max. output: 9,5V (1kHz)Noise floor MM / MC: 94dB (A weighted) / 75dB (A weighted)THD MM / MC:
The entry-level DAC Box E is an excellent D/A converter for digital sound sources using optical and coaxial connections. Despite the low price, it sounds outstanding and supports HD music data up to 24/192kHz. DAC Box E uses high quality components like precision D/A converter chips and a low noise output stage. It will act as a perfect upgrade for any digital stereo audio source, especially for best-buy CD-players, Bluray or DVD players with CD playback, set-top boxes etc! The whole audio circuitry design is perfectly linear with low output impedance to avoid any negative interference with cables or pre-amps. Its class-leading audio performance makes DAC Box E an outstanding low-cost audio bargain! Features:24bit / 192kHz D/A conversion Co-axial (RCA) & optical (Toslink) S/PDIF input SMD circuitry Special low noise components Internal metal shielding Small size allows installation close to source Gold plated RCA connection sockets Outboard power supply included Specifications:Line-level output: 1 pair RCA/phono socketsOutput voltage: 0,7VrmsDigital inputs: 1x coaxial (S/PDIF), 1x optical (TOSlink®)D/A converter: Texas Instruments TLV320DAC23 Cirrus Logic CS4344. 24Bit/192kHzSupported audio format: PCM (LPCM) (Stereo only, no support for multi-channel formats)Sampling rates Optical and coaxial input: 44,1kHz, 48kHz, 96kHz and 192kHz (coaxial only)Outboard power supply: 18V/500mA DCPower consumption: 200mA DC,Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mmWeight: 250g without power supply
Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry-level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier. Features:Amplification and RIAA equalisation for MM cartridges Design principle inspired by Dr. Sykora SMD circuitry Special low noise components Internal metal shielding Small size allows installation close to record player Gold plated RCA connection sockets Outboard power supply included Specifications:Input impedance: 47kohmsInput capacitance: 120pFGain: 40dBOutput voltage(typically): 500mV @ 1KhZ with 5mV inputNoise floor: 88dB (A weighted)THD:
The X1 A utilizes a newly-developed acoustic design with a carefully selected condenser capsule, low noise electronics, an integrated windscreen, and a gold-plated XLR connector. Just like the acclaimed X1 condenser, it also includes a switchable attenuation pad & low-cut filter and a robust all-metal chassis. With a newly-developed condenser capsule and an exterior based on the rugged metal chassis of the X1, the X1 A offers first-class sound & specifications at an even better "home studio" cost, featuring an extremely natural frequency response, massive SPL-handling capabilities (150dB!), switchable attenuation and low-cut filters, and a perfectly balanced sensitivity level - so it's at home on absolutely any source.From vocals to acoustic instruments to electric guitars or percussion, the X1 A is the perfect choice for any musician seeking a high-quality microphone with an entry-level price tag. The X1 A comes complete with a rock-solid, newly designed swivel mic clip and thread adapter to fit with any mic stand.If you need additional rumble control, the X1 A integrates perfectly with sE's Isolation Pack, as well as the Reflexion Filter X - recommended for an instant pro vocal recording setup for your home studio.Specifications:Capsule Type: 2/3" Permanently-Biased CondenserDirectional Pattern: CardioidFrequency range: 20 Hz - 20 kHzImpedance: 1K OhmsCurrent Consumption: 4.0 mADiameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)Weight: 390 g / 13.8 oz
There's more magic per square inch In Flashback Mini Delay than you'd find in a Smurf. The industry standard, most revered TC Electronic delay tones, plus TonePrint - the greatest innovation to guitar since guitar strings!Features:TonePrint-enabled - load Flashback Mini Delay with your favorite artist's delay tonesFree TonePrint Editor - create your own custom delay pedalBeam enabled - send TonePrints to Flashback Mini Delay through our free TonePrint app for iPhone and AndroidRoom for choice - select between renowned delays including tape, analog, 2290 and dynamic delayUltra-small footprint - so wear tiny shoes!
The most intuitive and amazing looper known to musickind is back. Packing a wealth of cool creative features that'll see you jam along with the cream of the crop in music today via the innovative StarJam feature, while creating multi-layered masterpieces in seconds flat. But first and foremost Ditto Stereo Looper is here to give all you loop lovers what you've been craving the most - dirt simple looping in stereo! Features:Super Intuitive - made by guitarists for guitaristsLoop Import/Export, Backing Track and StarJam5 minutes of looping time with unlimited overdubsCompact DesignStereo I/OAudiophile approved 24-bit uncompressed high quality audioTrue Bypass and Analog Dry-ThroughRuns on 9V batteries or optional PSU9V/100mA
BonaFide Buffer is the sonic remedy that will free your tone of any treble-sucking constraints put upon it by long cable runs. Just slam this high-quality, no-nonsense tone tool on your pedalboard and get ready to bask in your tone as it was meant to be. Transparent, crisp, alive and all you! Features:High-Quality analog bufferRun long cables without any signal degradationPower failure mode - Automatically switches to True Bypass if power gets cut.Extremely high signal-to-noise ratio (>112dB)Road-ready constructionUltra-compact design that'll fit on any board9V/40mAHigh quality components
John's was one of the first rock stars to join theTonePrint program and his sounds proved so popular. It captures his interpretations of classic TC effects. Joined forces and the result is what happens when you set John free on the effects that inspire him.Dreamscape houses Chorus, Flanger and Vibrato effects that will keep you challenged, inspired and coming round for riff-inspiring possibilities. The controls on Dreamscape are comprised of a set of knobs and a voicing switch that take you from Johns exact settings to your own wildest dreams with precision and ease. Set depth and speed at noon and crank the fx level knob to get Johns exact tone. Features:Six Signature Tones Tailored by John PetrucciOne Brand New custom John Petrucci Flanger TonePrintChorus, Flanger and Vibrato modesAll Corona Chorus TonePrints available for Dreamscape
T2 is your new one stop portal to reverb heaven! Containing reverbs as lush and deep as the Grand Canyon and as hauntingly beautiful as the Aurora Borealis, T2 is a true testimony to the love of reverberating tones. T2 takes everything that made the original Trinity Reverb such a success and adds a plethora of new sounds, making this a must-have for every reverb aficionado out there! Features:Ten exclusive gorgeous Reverb sounds, lovingly crafted by TC Electronic and ProGuitarShopTonePrint® enabledBeam enabledPedal simple - don't read, rock!10 Reverb TypesTrue Bypass (optional buffered)Analog-Dry-ThroughStereo in- and outputSpillover on/offEasy battery accessSmall footprintHigh quality components
So much chorussy goodness in such a tiny pedal? People have been chased out of town for less, but we're telling you, we did it! If THAT sounds too good to be true, wait until you hear this pedal! Lush, thick and swirly, in a form factor chorus-smugglers around the world and guitarists with precious little room on their boards would appreciate. From subtle swells to full on Leslie sounds, the classic SCF sound and a huge sounding-trichorus, condensed and infinitely more into a tiny pedal! No matter what your chorus needs may be, you can find just the right sound here - in a pedal that takes up next to no space on your board! Features:TonePrint-enabled - load Corona Mini Chorus with your favorite artist's chorus tonesFree TonePrint Editor to create your own custom chorus pedalBeam enabled - send TonePrints to Corona Mini Chorus through our free TonePrint app for iPhone and AndroidRoom for choice - choose between our legendary SCF chorus and an ultra- lush trichorusUltra-small footprint - so wear tiny shoes!True-To-Tone: True bypass and analog-dry-throughPut it in front of your amp or in the loop, Corona Mini Chorus is equally awesome!
Shaker Vibrato has been the sleeper hit of the TonePrint series. Guitarists loved adding the life and vibe of both subtle and pronounced vibrato effects - and rightly so! From classic Leslie-type tones and cool Mellotron vibes through the fragile 'Lucy In The Sky With Diamonds'-type sounds or a modern 'bottom of the ocean' swirl, Shaker Vibrato delivers. Now you can have all that made the original Shaker great in a pedal so small, and so awesome sounding, there's no excuse to not add it to your board! Size matters in all aspects of life. More volume is better than less, 2 guitars are better than one, etcetera, etcetera. But when it comes to pedals, a tiny form factor combined with a great sound is the clear winner for guitarists. Features:TonePrint-enabled - load Shaker Mini Vibrato with your favorite artist's toneFree TonePrint Editor to create your own custom vibrato pedalBeam-enabled - send TonePrints to Shaker Mini Vibrato through our free TonePrint App for iPhone and AndroidUltra-small footprint - so wear tiny shoes
With this super-compact bass head, you get a lot more than just power to play. The unique TonePrint feature allows you to load and swap effects in seconds, which is sure to inspire you to come up with personal and diverse bass lines.Weighing in at only 4 lbs./1.8 kg, BH250 is the ideal partner if you are a busy bass player in need for a full-featured head with ample power and oomph. Get through any gig or session, while keeping your spine functional beyond your 30th birthday. With BH250, you get the perfect balance between output and weight.Features:Cut an Boost at Different FrequenciesTonePrint Enabled6 Effect TypesChorus, Flanger, VibratoOctaver, SpectraComp, Bass DriveTonePrints Made by the Best Bass PlayersNathan East, Mark King, Duff McKagan, Roscoe Beck and moreBuilt-in TunerGet Inspired!Specifications:Bass: Cut@80Hz / Boost@100HzMid: Cut@500Hz / Boost@800HzTreble: Cut@1,800Hz / Boost@3,150Hz250 Watt4 lbs./1.8 kg8.7" x 2.5 x 9.6"220 mm x 63 mm x 244 mm
Ditto X4 Looper is the pedal that'll let you turn a single moment in time into something truly spectacular. By perfectly merging ease of use with stellar creative features like dual loop tracks, 7 loop FX, loop decay and MIDI sync, Ditto X4 Looper will instantly become the canvas on which you paint your multi-layered sonic masterpieces. If you can dream it, you can loop it! Even though Ditto X4 Looper basically offers endless creative possibilities, it still honors the core principle of the famed Ditto Looper. Simplicity! No drum-machines, no deep-editing menus or other time consuming tech-nonsense, only immediate unfiltered fun. So all you have to think about is - What will you create today? Features:The guitar player's looper - made for guitarists by guitaristsDual loop tracks - create evolving multi-track compositions or fully fledged songs7 loop FX - endless creative potentialMIDI sync - for perfectly timed live loopsLoop decayTrue bypass and analog dry-throughStereo In/OutStarJam - Import free loops made by music's finest9V DC/300mA
One of the most recurring things we hear from the TC Electronic community regarding our Flashback Delay pedals, is that they sound so good that they wish they could have several of the delay tones running at the same time. Well, we're here to tell you that you can stop dreaming folks! The Flashback Triple Delay is here and it's ready to rock your delay-hungry socks off! Ever heard a tape echo run through a ping-pong delay and then into a reverse delay? No? It sounds amazing. With the Flashback Triple Delay you can go as crazy as your imagination allows and with the added function of running the delays in series or in parallel, you can go from lush divine delays to otherworldly soundscapes in an instant! Time and space have never been easier to manipulate. Features:Three independent delay engines11 different subdivisionsToggle between having your delays in series or in parallelTonePrint® enabledBeam enabledPedal simple - don't read, rock!Top Tempo16 Delay TypesTrue Bypass (optional buffered)Analog-Dry-ThroughExpression pedal inputStereo in- and outputMIDI enabled9 Volt DC power supply includedHumongous headroom
Kick your playing into high gear with Spark Mini Booster, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things. With a full 20 dB of boost, Spark Mini Booster is a great clean booster. But that's not all it does - keep turning that knob and it'll start working its magic driving gear into peak performance! No matter what your style or set-up is, this musical miracle will maximize your potential but let your core tone shine through unaltered. Features:20 dB of boost.Level knob - boost levels or drive amps to peak performancePrime-Time™ - seamlessly toggle between latching and momentary modes, depending on how long you hold down the footswitch.Place after existing distortion/overdrive to enhance drive sounds.Add grit, life and compression to your tone.Add body, punch and warmth to pickups.True bypass
HyperGravity Compressor is the missing link that will take your tone from good to great. Featuring no less than three amazing compression modes; including a state-of-the-art multiband compressor, a cool vintage compressor, plus endless compression combinations through TonePrint. HyperGravity Compressor is the key to getting that much desired pro tone with even dynamics. Kick it in and be prepared to shine! HyperGravity Compressor's highly advanced multiband dynamics algorithm is the same MD3 compression algorithm that can be found in our studio production masterpiece, System 6000 which has been the preferred dynamics tool for top producers for over 10 years. Its technologically superior engine applies perfectly tailored compression for your highs, mids and lows, and leaves you with an ultra-transparent and in the end, more musical compression than what can be achieved with standard single-band compressors. This lets you go from subtle airy shimmers, to full-on straightjacket tone-holds and anywhere in between, without ever compromising your original tone. Features:Studio-Quality Multiband CompressorVintage Mode for classic stompbox compressionTonePrint enabledTrue BypassCompact design9V/100mAHigh quality componentsRoad-ready construction
