MENU
Αναζήτηση
Filters
As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50xBL (White) professional monitor headphones feature the same coveted sonic signature, with the added feature of a detachable cable. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals. Specifications:Type: Closed-back dynamicDriver Diameter: 45 mmMagnet: NeodymiumVoice Coil: CCAW (Copper-clad aluminum wire)Frequency Response: 15 - 28,000 HzMaximum Input Power: 1,600 mW at 1 kHzSensitivity: 99 dBImpedance: 38 ohmsWeight: 285 g (10 oz), without cable and connectorCable: Interchangeable cables: Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cableAccessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter
Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL). Specifications:Element: Externally polarized (DC bias) capacitorPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Noise: 16 dB SPLDynamic Range (Typical): 129 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 78 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.8 mA typicalSwitch: Flat, roll-off; 10 dB pad (nominal)Weight: 126 g (4.4 oz)Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeOptional Interchangeable Elements (sold separately):AT4049b-EL (Omnidirectional);AT4053b-EL (hypercardioid)Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying caseAudio-Technica Case Style: S1
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing. Specifications:Type: Closed-back dynamicDriver Diameter: 40 mmMagnet: NeodymiumVoice Coil: Copper-clad aluminum wireFrequency Response: 15 - 20,000 HzMaximum Input Power: 700 mW at 1 kHzSensitivity: 96 dBImpedance: 47 ohmsWeight: 190 g (6.7 oz), without cable and connectorCable: 3.0 m (9.8'), straight, left-side exitAccessory Included: 6.3 mm (1/4") snap-on adapter
1/4 scale wooden violin bow w/horsehair.
1/2 scale wooden violin bow w/horsehair.
Dynamic microphone with Switch On-off, cable and clumb.Specifications:Type: Dynamic Frequency response: 50-14000Hz Sensitivity: -74dB±3dBΙmpedance: 600Ω±30%Weight: 247.2 g
3/4 scale wooden violin bow w/horsehair.
6' & 7' Traditional wooden bongo set.
4/4 scale wooden violin bow w/horsehair.
Ethno Instrument Version 2 delivers expressive ethnic instrument sounds combined with authentic world music loops and phrases in one window. This massive 21GB library delivers all the exotic textures you need to take your recordings to the four corners of the globe. Place your music in real acoustic spaces, from primordial caves to towering forests to remote canyons, all faithfully reproduced with stunning realism by Ethno’s built-in convolution reverb processor.Start with a huge library of multisample instruments from all over the world, recorded with pristine audio fidelity. Browse and search by category or geographic region. Now add hundreds of authentic loops and phrases, instantly tempo-locked to your host software time line. Slice loops with one click to trigger each beat from your keyboard, or drag & drop them directly into your host software tracks. Play authentic non-western tunings and scales using your favorite MIDI controller. Adjust sounds quickly with Ethno’s intuitive controls.Create entire songs with unlimited parts and mix them in Ethno or your host software via multiple outputs. Run Ethno stand-alone to turn your computer into a world instrument powerhouse with disk streaming and multiple outputs. Or load it as a plug-in that saves all settings with your host software sessions for instant recall. Co-producer on Michael Jackson's Dangerous album and many other multi-platinum releases, Teddy Riley is one of the most successful R&B producers of all time and is widely recognized as the father of New Jack Swing. Teddy uses Ethno in his daily work, most recently on the posthumous Michael Jackson album Michael.
Τraditionally handcrafted with selected woods by skillful instrument makers - constructed w/high quality rugged materials - specs: solid spruce top - solid maple back & sides - maple neck & bridge - black metal tailpiece w/ 4 fine tuners - hard wood, ebonized fingerboard / chin rest/ tuning pegs - comes with a bow.
Τraditionally handcrafted with selected woods by skillful instrument makers - constructed w/high quality rugged materials - specs: solid spruce top - solid maple back & sides - maple neck & bridge - black metal tailpiece w/ 4 fine tuners - hard wood, ebonized fingerboard / chin rest/ tuning pegs - comes with a bow.
Βag for Bass 20''.
Guiro Tone Block w/ beater.
Τraditionally handcrafted with selected woods by skillful instrument makers - constructed w/high quality rugged materials - specs: solid spruce top - solid maple back & sides - maple neck & bridge - black metal tailpiece w/ 4 fine tuners - hard wood, ebonized fingerboard / chin rest/ tuning pegs - comes with a bow.
W / folding legs. Height range: 65 to 70 cm / 25.6 to 27.6 in - Neck fork w/ safety strip. Weight: 0.95 Kg / 2.1 lbs- Colour: Black.
Traditionally handcrafted from selected woods by skillful instrument makers - Constructed with rugged, high quality materials - All cellos come with bow and rosin in bag - Specs: Solid Spruce Top - Solid Maple Back & Sides - Maple Neck & Bridge - Black Metal Tailpiece w/ 4 fine tuners - Ebonized hardwood fingerboard & tuning pegs.Specifications:Size: 4/4 Βody Type: - Top: Spruce Back: Maple Side: Maple Neck: Maple Finger Board: Ebonized Hardwood Bridge: Maple Tuning Pegs: Ebonized Hardwood Tailpiece: Black Metallic Strings: - Fine Tuner: Yes - 4 Accessories: Gig bag - Bow
Τraditionally handcrafted with selected woods by skillful instrument makers - constructed w/high quality rugged materials - specs: solid spruce top - solid maple back & sides - maple neck & bridge - black metal tailpiece w/ 4 fine tuners - hard wood, ebonized fingerboard / chin rest/ tuning pegs - comes with a bow.
Deluxe black nylon keyboard bag. Dim.97 x 37 x 13 cm,10 mm thick.
18' SH Regular Medium Crash.
16' SH Regular Medium Crash.
Deluxe black nylon keyboard bag. Dim.112 x 47 x 17 cm, 15 mm thick.
The design of our LCD-3 has remained largely unchanged since its inception, and for good reason. This headphone has long been a customer favorite due to its high resolution, wide soundstage, and slightly “warm” midrange. The depth and impact of the LCD-3 never fails to satisfy even the most discerning ears.
W / Adjustable height from 47 to 55 cm - Top dim.: (56 x 33) cm - Weight: 7.6 Kg- black highgloss/ black vinyl.
W / independently adjustable height from 51 to 60 cm - Seats size: 2x(47 x 32)cm- Tops: 2 x(44 x 29)cm - Weight: 10.8 Kg- black highgloss / fireproof black velvet.
Specially designed and easy to use double-sided tape pads for the DPA Miniature Concealers. Store tape away from excessive heat and light.
Sample simplicity: Load virtually any sample via standard SD or SDHC card and assign it to any of the MPX8’s eight backlit velocity- and pressure-sensitive pads.It’s that simple.Use it in the studio. Use it live on stage or on air. MPX8 packs proven Akai Pro technology into a compact, durable design that’s built to perform. Control Software & MIDI Gear: MPX8 also has USB MIDI plus standard MIDI inputs and outputs. Control everything from music software on your laptop to outboard MIDI gear. The included USB cable and 1/8'-to-MIDI adapter make it easy to connect. Edit with Ease: With the included sample kit editor, you can easily arrange, tune, and add reverb to your samples on your Mac or PC before loading them onto MPX8. The editor’s drag-and-drop functionality makes loading your samples as easy as possible. Get in the Loops: MPX8 also comes with a free Loop Library download from Akai Pro, plus a large library of standard samples built in, which can be used for live performance in front of a crowd, on a radio show, or for in-studio production. Lose the Luggage: It’s compact, easy to load, and ready to go. MPX8 packs the sounds you need under great-feeling pads inside a solid Akai Pro design. You get quick and convenient one-touch access to a virtually unlimited number of sounds, shots, stabs, and drops. It’s that simple. Add mono or stereo samples via standard SD card (sold separately)8 velocity-sensitive and pressure-sensitive padsUSB MIDI plus standard MIDI inputs and outputsAlso controls computer MIDI software and outboard MIDI gearDrag-and-drop sample kit editor for Mac® and PC includedBuilt-in library of popular sounds and samplesIncludes additional free Akai Pro loop library downloadTune, add reverb, and save sample sets for easy recall(2) Balanced 1/4-inch outputs (6.35mm)1/8-inch headphone output (3.5mm)Audio Outputs: (2) TRS 1/4' (balanced), (1) 1/8' (3.5mm) headphoneMIDI I/O: MIDI over USB, 5-Pin DIN via 1/8' (3.5mm) MIDI in and out (cable included)Pads: 8 velocity sensitiveSounds: 21 internal (virtually unlimited via sd card)Sounds Accessible via Pads: 8Polyphony: 8-voicePanning: 9-position user programmableOther Features: Reverb and sample tune and 3 different trigger types.Power: Input 5VDC 1000mA via USBWeight: 1lb ( 0.45kg)Dimensions (W x D x H): 11.6' x 4' x 1.3'
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.Includes BLX4R rack mount receiver, BLX2/BETA58A handheld transmitter, microphone clip, single and dual rackmount kit, two 1/4 wave antennas, zipper bag, power supply, 2 AA batteries, and user guide. System IncludesBLX2Handheld transmitter with choice of microphone cartridge.BLX4RRack-mountable receiver with removable antennas for quick distribution.
The GX5 uses a Class H system, based on key elements of the PL Series, (PLX, PL3, CX, DCA) almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss. Both amplifiers use premium toroidal power transformers for reliable "mid-weight" performance. A variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink. This keeps the transformer cool and allows a full size heat sink to fit in a down-sized chassis.Specifications:8 ohms / 1 kHz (both channels driven): 500 W8 ohms / 1 kHz (single channel driven): 600 W4 ohms / 1 kHz (both channels driven): 700 W4 ohms / 1 kHz (single channel driven): 850 W Distortion (1 dB below rated power, 1 kHz): 8 ohms: less than 0.02%, 4 ohms: less than 0.05% Signal to Noise (20 Hz - 20 kHz): 100 dB Input Sensitivity: 1.2 VrmsVoltage Gain (8 ohms): 34.4 dB Output Circuitry: 2-tier Class HPower Requirements (1/8 power, pink noise at 4 ohms, 120V): 6A Frequency Response: 20 Hz - 20 kHz, +0, -1 dB Dynamic Headroom (4 ohms): 2 dB Input Impedance (ohms): Greater than 20k (balanced) Maximum Input Level: +24 dB (16 Vrms) Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced Output Connectors (each channel): Speakon, 1/4", Binding Posts Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults Front Panel Controls and Indicators: Gain controls, 21 detents Red Clip LEDs, proportional, 0.1% THD threshold Green Signal LEDs, threshold -35 dB Blue Power LED, AC on Rear Panel Controls: Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top)Dimensions: Height: 3.5" (89 mm) 2RU, Width: 19" (483 mm), Depth: 10.1" (257 mm) Weight: Net: 28 lbs (12.6 kg), Shipping: 32 lbs (14.6 kg)
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.Includes BLX4 single-channel receiver, BLX2/SM58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.Includes BLX4 single-channel receiver, BLX2/BETA58A handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide. System Includes BLX2Handheld transmitter with choice of microphone cartridge.BLX4Single channel wireless receiver with microprocessor-controlled internal antenna diversity.
Traditionally handcrafted from selected woods by skillful instrument makers - Constructed with rugged, high quality materials. All cellos come with bow and rosin in bag . Specs: Solid Spruce TopSolid Maple Back & SidesMaple Neck & BridgeBlack Metal Tailpiece w/ 4 fine tunersEbonized hardwood fingerboard & tuning pegs. Size1/2Βody Type-TopSpruceBackMapleSideMapleNeckMapleFinger BoardEbonized HardwoodBridgeMapleTuning PegsEbonized HardwoodTailpieceBlack Metal TailpieceStrings-Fine TunerYes - 4AccessoriesGigbag - Bow
The V90 DAC is the perfect way to upgrade the performance of a wide range of music sources. Housed in a solid yet discreet case, it unites sleek design and technical excellence to offer unrivalled musical enjoyment.Offering Coax, Toslink and USB digital inputs, the V90-DAC is the ideal partner for a wide array of audio equipment. From PC and MAC computers, music streamers and set-top boxes to more conventional music sources such as CD and digital radio the V90-DAC delivers high-end sound quality at an affordable price.The V90-DAC deploys a state-of-the-art 32Bit DAC housed in solid yet discreet attractive brushed aluminum case. It unites sleek design and technical excellence to offer unrivaled musical enjoyment.Specifications:PerformanceJitter:
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. Specifications:Closed headphone Excellent ambient noise attenuation (35 dBA) Superb sound quality with high sound pressure level (105 dB) Extended frequency range 3.0m (9.8 ft.) single-sided straight cable with volume control Robust, easy serviceable construction as all parts are replaceable Excellent comfort for long-term wearing, softskin ear pads Secure and comfortable fit due to rugged, adjustable headband construction with soft padding Supplied in a carrying case (nylon) Info:Transmission type: WiredHeadphone design (operating principle): ClosedHeadphone impedance: 80 ohmsHeadphone frequency response: 5 - 30.000 HzNominal sound pressure level: 105 dBConstruction: Circumaural (around the ear)Cable & plug: Straight connecting cable with mini-jack plug (3.5 mm) adapter (6.35 mm)
Shield your microphone against wind and moisture with this Sennheiser MKW 4 foam windscreen that fits Sennheiser MK4 condenser microphones.
Back with a MasterpieceThe Grand 3 boasts completely different piano models to its two predecessors, merely building on the prestige that its name has managed to attain over the past years. This means that versions 2 and 3, both old and new, equally deserve to be held in high esteem for their respective quality piano models. But always keep in mind: for The Grand 3, Steinberg has not only come up with several different piano models but uses intelligent sample architecture and latest recording technology to achieve an even more authentic sonic image and realistic feel.Three grand mastersThe Grand 3 prides itself on three outstanding virtual grand pianos with a rich and realistic sound based on the most widely acclaimed grand pianos. The Yamaha C7 grand piano is the artist’s choice — its sound providing a true concert grand experience, while the expressive tone of the Bösendorfer 290 Imperial provides an extended musical range not found in other pianos. What’s more: the incredible sound, responsiveness and superb playing behavior of the Steinway D have also been added to perfectly complement the collection of virtual pianos featured in The Grand 3.More pianos, more choicesThe classic Yamaha CP80 Electric Grand has a timbral character that makes it genuinely recognizable. The Nordiska Pianofabriken upright piano has been recorded and designed for the not so grandeur of musical genres — its sound is ideal for pop and jazz music.Superb reverberationThe Grand 3 comes with a convolution reverb based on the same technology used by REVerence, the world’s first VST3-based convolution reverb processor already featured in Cubase 5 which benefits from every single aspect the VST3 standard has to offer. It boasts sumptuously realistic natural space simulation, emulating any acoustic environment — from the smallest live music venue to the most impressive cathedrals. This reverb includes a vast number of impulse responses that put the characteristic sound of some of the world’s most distinctive settings immediately in one’s hands — both in stereo and surround.An algorithmic reverb is also included to increase the amount of reverbs. With more than 60 reverb presets, this leaves the artist with ample scope to spatially enhance the piano sound!Flexible equalizationThis powerful and versatile equalizer offers full four-band parametric control that works as a sum over all output channels with variable response curves and shelving modes, as well as analog-style peak filters.All tuned upThe enhanced tuning editor provides customizable scales and a wealth of presets for tempered and concert tuning. Each tuning situation may be stored and retrieved as preset whenever required.The Grand 3 standaloneThe standalone version allows The Grand 3 to be used without a host application — a great choice for performing live and delivering the best sounding, most playable virtual piano software ever experienced!The Grand 3 standalone version comes with two additional features:For the record: The quick-idea scratch pad in The Grand 3 standalone version guarantees that all flashes of inspiration are recorded. Simply hit the button and The Grand 3 records everything played — now there’s no excuse for missing that one tune! With the scratch pad allows the recorded sequence to be played back for rehearsal purposes or exported as a standard MIDI file. It is also possible to load MIDI files and play them back as well.Never miss a beat: The metronome integrated into The Grand 3 standalone version is a useful tool, helping musicians keep a constant tempo while practicing the most difficult of piano pieces.Steinberg Key required
Hairy cover for MKE-400 microphone
Here's a shockmount for your Sennheiser MK 4 cardioid condenser microphone. Custom crafted and made to match your MK 4, the Sennheiser MK 4 Shockmount decouples your mic and keeps vibrations from ruining your takes.
Studio microphone with Retro look. Warm sound, optimized for vocal recordings. Uses the capsule of the legendary M 49 and U 47. Cardioid polar pattern. Set includes elastic suspension. The TLM 49* is a large-diaphragm studio microphone with a cardioid directional characteristic and a warm sound which is especially optimized for vocal performance. It is supplied as a set, with an elastic suspension.The design is inspired by that of the legendary M 49 and M 50 microphones of the 1950s. Naturally the TLM 49 has the typical Neumann fine matte nickel finish. The “sound design” is also oriented toward that of the M 49 and the U 47. By combining its retro look with proven Neumann transformerless circuit technology, this microphone ensures low self-noise and the use of high gain levels.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2' capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. Externally biased condenserGold sputtered 1/2' capsuleHeavy-duty satin-nickel plated bodySurface mount circuitryLow noiseFull frequency response TypeCondenserPick Up PatternCardioidFrequency response20 Hz - 20 kHzSensitivity-38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHzΙmpedance100ΩΤotal harmonic distortion-Dimensions (W x H x D)20mmW x118mmH x 20mmDWeight101gmAccessories-
Hypersampled acoustic drum kits for Reason 3.0. The Reason Drum Kits ReFill is an extensive DVD-ROM library of life-like, multisampled drum kits mapped out across your MIDI keyboard, but with an important twist: these sampled drums actually sound like actual drums.
The newest DAC for the highest performances. Precision volume control on balanced analog output, selectable digital filter, very low jitter 192/32 USB input, I2S connection, flexible headphone amplifier, coaxial, optical and balanced digital inputs, high precision fully balanced DC coupled analog stage, configuration setup, aluminum remote control Specifications:Digital Input Frequency: 32 kHz to 192 kHz, up to 32 bitDynamic Range: 126dB (24 bit input)S/N Ratio: 112dBInputs: 4 S/PDIF (2 RCA coax, 2 TOSLINK),1 XLR AES/EBU, 1 USB2.0, 1 I2S RJ45Output Unbalanced: 1 pair per channel (RCA)Output Balanced: 1 pair per channel (XLR)Headphones Output: 1 6,35mm (¼”) TRS connectorMain Voltage/Consumption/Standby: 230/115V-100V 50/60Hz / 25VA /
Professional space-saving straight microphone stand with heavy stackable iron-cast base and nylon clutch-style height-adjustment. (Diameter: 255mm, Weight: 3,95kg, Minimum Height: 910mm, Maximum Height: 1650mm).ANTIVIBRATION BASE - Round base with innovative anti-vibration and scratch-proof design.IRON-CAST BASE - Sturdy iron-cast base for a firm stand on the floor.STACKING SYSTEM - The special design of the iron-cast base allows up to 6 stands stacking on top of each other.ONE-HAND HEIGHT ADJUSTMENT - Innovative spring-loaded locking system for an accurate and no-slip adjustment even with just one hand.SIMPLE AND GENIAL - Technical drawing of the new locking device to adjust height in a simple way.
