MENU
Αναζήτηση
Filters
The sE Electronics SPACE mic isolation filter gives you incredible acoustic control, allowing you to minimize sonic reflections in your mic for cleaner, more distinct recordings. Based on their acclaimed Reflexion Filter, SPACE features 10 layers of different materials designed to absorb sound that would normally reflect back into your microphone. The result is tighter bass, more detailed mids, natural highs, and an all around better sound. No matter where or what you're recording, you'll capture a better sound with the sE Electronics SPACE acoustic filter on your mic stand.sE Electronics SPACE Acoustic Isolation Filter at a Glance:You'll spend less time mixing when you get a better sound at the sourceBetter sound thanks to sE's Multi-Layer Air-Gap technologyFlexible mounting hardware is easy to positionYou'll spend less time mixing when you get a better sound at the sourceBy capturing tighter, cleaner audio you'll spend less time problem solving during mixdown. Instead of trying to reduce room rumble, or trying to add definition to a blurry recording, you'll spend your mix time sweetening audio instead of trying to "fix it in the mix". From voiceovers and foley recording to standard music production, anyone who records audio can benefit from the acoustic isolation offered by the sE Electronics SPACE acoustic filter.Better sound thanks to sE's Multi-Layer Air-Gap technologySPACE is sE's thickest acoustic filter to date, with 10 full layers of various materials to absorb and diffuse as much sound as possible. Materials include a punched aluminum diffusor, wool absorbers, tensioned aluminum foil membranes, polyester acoustic fiberboard, and a polycarbonate diffusor, all separated and isolated by asymmetric air gaps. Even if you're recording in a highly reflective room, SPACE gives you the acoustic isolation you need in a convenient design.Flexible mounting hardware is easy to positionSPACE is easy to attach to any standard microphone stand, and its flexible positioning makes it perfect for almost any recording application. It's adjustable both vertically and horizontally, with rugged hardware that holds on tight. Adjustable tilt lets you achieve the perfect angle for recording percussion, guitar amplifiers, piano, and other applications.Features:Acoustic filter for reducing unwanted reflections in your microphoneExceptional acoustic control from 10 thick layers of various materialsRugged mounting clamp is adjustable to help you get the perfect angle with your microphoneImproves bass clarity, midrange detail, high-frequency clarity, and stereo imagingPerfect for voiceover, foley, and music production
The Nagaoka MP-100 phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Half-inch system with conical diamond on lightweight aluminum cantilver. The Nagaoka MP-100 phone cartridge offers musical clarity and expression beyond its price and competitors - a plendid upwards start toward long term musical enjoymentFeatures:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Lightweight aluminum alloyStylus type: Conical diamond with .0006 inch radiusWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance 1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.3 g
Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.Features:Superfine polished eliptical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantilever for high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Aluminum alloyStylus type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radiiWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 23dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0 g
The Reloop NEON is a powerful pad controller for Serato DJ that will elevate your performance to a whole new level. Acting as the perfect support hardware for DVS users and controller DJs, the 8 ultra-low-latency and touch-sensitive RGB drum pads are perfect for triggering Samples, Cues, Loops and FX. Coming in as the most extensive Serato SP6 sample controller on the market, the NEON also offers LED feedback for each sample slot - feeding back status and mode information.Hardware FeaturesUSB bus-poweredSmart Link: NEON can be connected to each other via mini jack cablePowerful Serato DJ drum pad modular controllerOfficial Serato Accessory: plug-and-play with Serato DJDedicated Serato DJ SP-6 sampler control4-deck control for Slicer, Cue and LoopPerfect addition for DVS users and controller DJs8 touch-sensitive RGB performance drum padsA total of 8 intuitive performance modes (Sampler, Pad FX, Slicer, Looped Slicer, Cue, Hot Flip, Hot Loops, Loop and Manual Loop)Supports brand new Flip mode: Create individual edits from a song 'on the fly' and trigger these sequences as Hot FlipSerato DJ FeaturesNew Serato Flip Expansion packNew FX, powered by iZotopeFX Expansion Packs to Activate/Purchase in-appSingle and Multi FX modesPitch'n Time DJ Expansion packSlip ModeActive Deck SelectRecordingQuantise modeMIDI Mapping with MIDI panelSP-6 with Sync / Simple and advanced modesUp to 8 cue pointsManual loops with 8 saved loop slotsAuto loops and loop rollsCycle through the DJ-FX, Recording and SP-6 panels by using the panel selectSmart and Simple sync4 Performance view modesAutoplayBeatgrid detection and Beatgrid editorTechnical specifications:Connections: mini USB, link port, KensingtonDimensions: 223 x 16.1 x 123 mmWeight: 359.2 gr (net)Incl. USB cable, quick start guide and link cable (3.5 mm jack
The C 516BEE CD Player represents an unbeatable combination of audiophile performance and cost conscious engineering, making it the ideal companion to our popular C 316BEE Integrated Amplifier. Improving on our five-star rated C 516BEE design was no small task, but the C 516BEE exceeded our expectations thanks to its latest generation 24/192 Cirrus Logic Delta/Sigma DAC for more accurate dynamics. We also fine-tuned analogue stage for even lower distortion compared to its predecessor. We’ve also refined the C 516BEE’s industrial design imparting a sleek new profile to our Classic NAD face. Standby power consumption is reduced to a tiny trickle (
Guitar COMBO amplifier 10W with 6.5" custom speaker, top panel controls, Clean Overdrive & Tremolo, VOX classic appearance.
3 Shure SM 58 A, 5 meter cables XLR - XLR and 3 microphone stands !
Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt. DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%: DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour: walnut-silverPower supply: 12 V DC, 150 mA
Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt. DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%: DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour: Walnut-SilverPower supply: 12 V DC, 150 mA
Our optional SGH-6 Shotgun capsule adds a professional-quality hyperdirectional (that is, highly directional) microphone to the H5 and the H6, making it the perfect audio recorder for anyone working in film, video or live theater, or for ENG (electronic news gathering) applications.
Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt. DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%: DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour: textured lacquer blackPower supply: 12 V DC, 150 mA
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes.Tone arm technology:Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber.Chassis technology:Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat.Drive technology:Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DINRumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 20 Hz - 22 kHzDepth sensing capability (300 Hz): 70 µm at 315 HzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 5,43 kgColour: black / silverPower supply: 12V DC, 150 mA
The AR is a classic among Ibanez guitars. It was one of the first original designs produced by Ibanez and continues to be a sought after guitar. The AR continues that legacy with pride. All AR series have Tri-sound switch for each pickup. Choose from series, parallel & coil-tap wiring configuration for tonal variety. Non slip Sure grip III knobs support accurate volume & tone control. Specifications: Νeck Type: AR 3pc Maple set-in neck (smooth heel)Βody: Flamed Maple top/Mahogany body w/Abalone body bindingFretboar: Bound Rosewood fretboard w/Acrylic & Abalone block inlayFret: Medium fretsBridge: ART1 bridgeTailpiece: Quik Change Classic tailpieceNeck pickup: Super 58 (H) neck pickup (Passive/Alnico)Bridge pickup: Super 58 (H) bridge pickup (Passive/Alnico)Hardware color: Gold
With a machined armboard, dedicated external power supply, Linn tonearm, and a moving coil cartridge, this turntable delivers stunning performance and musicality at a price level between Klimax and Majik.The complete Akurate LP12 turntable comprises:Sondek LP12 turntableKore sub-chassis and armboardLingo power supply and motor control unit for the AC motorAkito tonearmKlyde moving coil cartridgeThe Akurate LP12 is available with a choice of solid wood plinths: Black Ash, Cherry, Oak, Rosenut and Walnut. Linn Akurate LP12 Turntable SpecificationsSpeed Accuracy: 0.03%Platter Tolerance: 1/1,000th inchDimensions (WxHxD): 5.5 x 17.5 inches x 14 inchesWeight: 22 lbs
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments.Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Amplifier 2x800W/4O-520W/8O-1Ch1600W bridge amplifier 8W. Stereo / Parallel / Bridge mode. 0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post.Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 15.2 kg.
Two-channel, 525W @ 4Ω Power AmplifierSpecifications:Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power triggerPeakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup
SamplePad 4 comes equipped with four responsive, LED-illuminated rubber pads, dual-zone trigger input, and eight preset kits. With a built-in library of the most commonly requested percussion and electronic drum sounds and the ability to load samples, the only limit is the player’s imagination. For even more flexibility, users can tune and add reverb to their sounds. Intuitive navigation makes it easy to browse through kits and players can drag and drop their samples via USB on a Mac or PC without removing the SD card. The bright blue LED lighting is clearly visible in every setting.Features:4 pads allow endless percussive and sampling triggering possibilitiesBuilt-in library of 25 of the most popular percussion and electronic drum sounds8 preset kitsAdd any sound sample to your drum or percussion setup via SD cardAccepts SD/SDHC cards up to 32GB, storing 91 user kits and 512 samples per cardDynamic blue LED lighting provides clear visibility in any settingIntuitive navigation lets you browse through your kits with easeDrag and drop samples via USB on Mac or PC without removing the SD cardUSB-MIDI in/outTune and add reverb to your soundsDual Trigger input for expansionSpecifiacations:Voices: 25Connectors: USB MIdi In / Out
The Rode inisLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
The Radius 270 houses a precision-crafted Radius driver system of twin 100mm (4”) C-CAM® mid/bass drivers and a 25mm (1”) C-CAM tweeter. Pair with the 225 or 200 for scintillating home theatre audio, or with the 380/390 sub in a discreet two-channel system. Features:Ultra-slim depth of just 40mm (1½") complements the slimmest TV screens.Designed and tuned to provide optimum sound quality when flush wall mounted.Black anodised aluminium finish for excellent aesthetic results.Easy installation: flat to wall fixings, invisible cable entry/connection and a removable magnetic grille make installation simple and seamless.A single alloy extrusion provides a slender profile, maximises the internal cabinet volume and offers high rigidity to suppress resonance.A specially developed 25mm C-CAM® tweeter features a unique venting and rear loading chamber for low resonance and clean pure sound down to the low frequency crossover point.4" low profile bass-midrange drivers feature a flat RDT® sandwich diaphragm constructed from C-CAM® and Rohacell materials.Unique 'floating' driver mounting reduces colouration: the drivers bolt to the rear of the cabinet and are de-coupled from the baffle at the front in an airtight neoprene seal.A special 'concertina' driver suspension design provides high excursion from a low profile assembly.4" low profile ABR drivers are individually tuned, providing punchy bass without the noise associated with ported designs.Specifications:Frequency Response: 80Hz – 30kHzSensitivity: 87dBSystem Configuration: 2- wayDriver complement: 2 x 4″ flat diaphragm mid-bass drivers ABR drivers: 2 x 4″ flat diaphragm C-CAM® tweeter: 1 x 25mm With vented loading systemNominal Impedance: 8 ohmsMaximum SPL (each @1M): 108.6 dBAPower HandlingWith amplifier crossover set to: 120 watts80Hz@12dB/OctaveRecommended Amplifier Requirements: 40-120 wattsBass Alignment ABR loading
Meticulously crafted using the experience of over three decades of loudspeaker design, Apex is a statement of imagination and minimalist styling for those who desire great sound and the space to enjoy it. The concentration of the awesome firepower and the finest driver technologies into beautifully compact enclosures of reassuringly solid die-cast aluminium, coated in several layers of high-gloss piano lacquer. The most demanding home theatre and music enthusiasts will discover brilliantly dynamic sound, rich with pulsating rhythms and lighteningfast natural detail at a resolution way beyond the limits of the latest HD digital media. Those inspired by cutting-edge styling will appreciate the ravishingly austere simplicity of the Apex design and the lifestyle versatility of its compact satellite and subwoofer combinations. Apex is very serious audio jewellery.Features:5 1/2" C-CAM Driver with RST® dimpled cone geometry for rigidity1" Gold C-CAM TweeterHiVe® II High Velocity reflex port; delivers smoother airflow for better transient response and tighter bassDedicated Internally Wired Stand availableCan be mounted on wall, ceiling or table top with dedicated robust bracketMagnetic Grilles; for the sleekest effect there are no visible fixingsRigid die-cast alloy cabinetFinished in luxurious metallic pearl white high glossSpecifications:Frequency Response +/- 3dB: 60 Hz – 35 KHzSensitivity: 87 dBDriver Compliment: 1 x 140mm (5 1/2″) RST® mid-bass driver, 1 x 25mm (1″) C-CAM® gold dome tweeterNominal Impedance: 8 OhmsMaximum SPL (each): 110.8 dBARecommended Amplifier Requirements (RMS): 25 – 100WBass Alignment: Front ported – bass reflex. HiVE®II port systemPower Handling (RMS): 100WCrossover Frequency: 3.0kHzExternal Dimensions: (H x W x D): 250 x 140 x 140 mmWeight (Individual): 3.95 kg
Meticulously crafted using the experience of over three decades of loudspeaker design, Apex is a statement of imagination and minimalist styling for those who desire great sound and the space to enjoy it. The concentration of the awesome firepower and the finest driver technologies into beautifully compact enclosures of reassuringly solid die-cast aluminium, coated in several layers of high-gloss piano lacquer. The most demanding home theatre and music enthusiasts will discover brilliantly dynamic sound, rich with pulsating rhythms and lighteningfast natural detail at a resolution way beyond the limits of the latest HD digital media. Those inspired by cutting-edge styling will appreciate the ravishingly austere simplicity of the Apex design and the lifestyle versatility of its compact satellite and subwoofer combinations. Apex is very serious audio jewellery. Features: 5 1/2" C-CAM Driver with RST® dimpled cone geometry for rigidity 1" Gold C-CAM Tweeter HiVe® II High Velocity reflex port; delivers smoother airflow for better transient response and tighter bass Dedicated Internally Wired Stand available Can be mounted on wall, ceiling or table top with dedicated robust bracket Magnetic Grilles; for the sleekest effect there are no visible fixings Rigid die-cast alloy cabinet Finished in luxurious metallic black high gloss Specifications: Frequency Response +/- 3dB: 60 Hz – 35 KHz Sensitivity: 87 dB Driver Compliment: 1 x 140mm (5 1/2″) RST® mid-bass driver, 1 x 25mm (1″) C-CAM® gold dome tweeter Nominal Impedance: 8 Ohms Maximum SPL (each): 110.8 dBA Recommended Amplifier Requirements (RMS): 25 – 100W Bass Alignment: Front ported – bass reflex. HiVE®II port system Power Handling (RMS): 100W Crossover Frequency: 3.0kHz External Dimensions: (H x W x D): 250 x 140 x 140 mm Weight (Individual): 3.95 kg
Symphony I/O Mk II is a multi-channel audio interface featuring Apogee’s newest flagship AD/DA conversion, modular I/O (up to 32 inputs and outputs), intuitive touchscreen display and optional world-class microphone preamps. Designed to deliver professional sound quality for audio recording, mixing and mastering, Symphony I/O Mk II is the ultimate music production centerpiece for any modern studio.The new Symphony I/O Mk II comes with direct connectivity to one of three different platforms – Thunderbolt™, Pro Tools® HD or Waves SoundGrid® network.Specifications:Analog IN: 2 balanced inputs on 2 female XLR connectorsAES IN: Stereo input on 1 female XLR connectorOptical IN: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connectorSMUX: 4 channels 88.2-96 kHz on 1 Toslink connectorS/PDIF: 2 channels, up to 96 kHz on 1 Toslink connectorS/PDIF Coax IN: 2 channels, up to 192 kHz on 1 RCA connectorAnalog OUT: 6 balanced outputs on 1 DSUB 25-pin connectorAES OUT: Stereo output on 1 male XLR connectorOptical OUT: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connectorSMUX: 4 channels 88.2-96 kHz on 1 Toslink connectorS/PDIF: 2 channels, up to 96 kHz on 1 Toslink connectorS/PDIF Coax OUT: 2 channels, up to 192 kHz on 1 RCA connectorFeatures:Connection: Thunderbolt cable (Sold separately)Performance: 44.1kHz – 192kHzLatency: 1.35 ms with Logic Pro X (96 kHz / 32 buffer)Computer: Thunderbolt-enabled Mac computer, including Mac Pro, MacBook Pro, Mac mini, iMac & MacBook AirOperating System: Mac OS 10.9.5 or greaterControl:Maestro app (included in software installer) and front panel touchscreenCompatible Software: Logic Pro XAny Core Audio application on Mac
The Radius 270 houses a precision-crafted Radius driver system of twin 100mm (4”) C-CAM® mid/bass drivers and a 25mm (1”) C-CAM tweeter. Pair with the 225 or 200 for scintillating home theatre audio, or with the 380/390 sub in a discreet two-channel system. Features:New 4” C-CAM® bass driver - Radius features all new bass drivers with concave cone profiles, introduced by our top-of-the-range Platinum speakers and applied subsequently to Gold GX. Extensive research and FEA modelling have allowed us to perfect the relationship between the new radiating diaphragm and its motor design, introducing larger motor sizes and voice coils for increased excursion, higher power capability and reduced distortion.New C-CAM gold dome tweeter - optimised to deliver the finest and widest performance within the compact Radius cabinets. It benefits from a more efficient rear-venting design, releasing air trapped and compressed at the back of the tweeter dome, and guiding it around the drive assembly to a rear-loading chamber.HiVe®II port design - Straight from Platinum’s design blueprint, the HiVe reflex port makes its Radius debut. It’s shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response.Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.Front and rear ported reflex designSpecifications:Frequency Response: 50Hz – 35KHzSensitivity: 87dBNominal Impedance: 6 ohmsPower Handling Single (RMS): 100 wattsSystem Power Handling (RMS): 150 wattsRecommended Amplifier Requirements: 40-150 wattsMaximum SPL (dBA): 107 Bass Alignment Bass reflex Front and rear ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeterCabinet Dimensions (H x W x D): 1000 x 177 x 208mm (393/8 x 615/16 x 83/16 Inches) Inc PlinthWithout Spikes Cabinet Dimensions (H x W x D): (Inc Grille & Terminals) 1025 x 177 x 208mm>(403/8 x 615/16 x 83/16 Inches) Inc Plinth, With SpikesWeight: 9.9kg (21lb 12oz)Finishes: WalnutFrequency Response: 80Hz – 30kHz
RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look! Features:Precision belt drive using free-standing synchronous motor Central mass point optimizes vibrancy behaviour Ultra precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Platter made from MDF using vinyl mat 10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments Magnetic antiskating Counterweight with TPE damping Available with or without Ortofon 2M Silver cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm MDFMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise - 71dBTonearm 10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net
RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look! Features:Precision belt drive using free-standing synchronous motor Central mass point optimizes vibrancy behaviour Ultra precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Platter made from MDF using vinyl mat 10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments Magnetic antiskating Counterweight with TPE damping Available with or without Ortofon 2M Silver cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm MDFMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise - 71dBTonearm 10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net
RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look! Features:Precision belt drive using free-standing synchronous motor Central mass point optimizes vibrancy behaviour Ultra precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Platter made from MDF using vinyl mat 10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments Magnetic antiskating Counterweight with TPE damping Available with or without Ortofon 2M Silver cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm MDFMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise - 71dBTonearm 10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net
RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look! Features:Precision belt drive using free-standing synchronous motor Central mass point optimizes vibrancy behaviour Ultra precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Platter made from MDF using vinyl mat 10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments Magnetic antiskating Counterweight with TPE damping Available with or without Ortofon 2M Silver cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm MDFMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise - 71dBTonearm 10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net
RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look! Features:Precision belt drive using free-standing synchronous motor Central mass point optimizes vibrancy behaviour Ultra precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Platter made from MDF using vinyl mat 10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments Magnetic antiskating Counterweight with TPE damping Available with or without Ortofon 2M Silver cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm MDFMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise - 71dBTonearm 10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net
RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions. Features:Precision belt drive principle using synchronous motor Ultra-precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Acoustical inert acrylic platter 9” cc EVO tonearm made from carbon Counterweight with TPE damping Adjustable aluminium tip-toe feet Available with or without Ortofon Quintet red cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise - 73dBTonearm 9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net
RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions. Features:Precision belt drive principle using synchronous motor Ultra-precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Acoustical inert acrylic platter 9” cc EVO tonearm made from carbon Counterweight with TPE damping Adjustable aluminium tip-toe feet Available with or without Ortofon Quintet red cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise - 73dBTonearm 9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net
RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions. Features:Precision belt drive principle using synchronous motor Ultra-precision DC-driven AC generator motor power Inverted platter bearing with ceramic ball Acoustical inert acrylic platter 9” cc EVO tonearm made from carbon Counterweight with TPE damping Adjustable aluminium tip-toe feet Available with or without Ortofon Quintet red cartridge 3 high-gloss colours (black, red, white) Lid available as an option Specifications:Speed: 33, 45 (manual speed change)Drive principle belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise - 73dBTonearm 9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net
The Sontronics STC-1 pencil-style condenser mic is perfectly suited to recording instruments of any kind: guitars, strings, wind, brass, ethnic, drums or percussion. Thanks to its three-stage filter (0, -10, -20dB) and pad (0, 75, 150Hz) switches, the cardioid-pattern STC-1 is one of the most flexible microphones in its class and gives impressive, professional studio-quality results for an affordabe price.The STC-1 comes in a luxury, velvet-lined wooden box with a mounting clip and windshield, and it is compatible with the Sontronics OMNI and HYPER capsules, available separately. With the OMNI capsule fitted, STC-1 becomes the perfect room mic (whether used solo or in a pair) and with the HYPER capsule, users tell us STC-1 gives great results on hi-hat!Choose either the STC-1 Silver in a brushed nickel finish or the STC-1 Black with a satin finish and gold lettering. Available as a single STC-1 mic or as an STC-1S stereo pair.
Korg minilogue is a stylish, innovative 37 key fully programmable analog polyphonic synthesizer boasting newly developed analog synth circuitry that provides a rich, diverse sound palette. 200 programs (100 Presets / 100 Users).Each program includes voice mode and sequence data settings Up to eight favorite programs can be registered. 8 modes (Poly, Duo, Unison, Mono, Chord, Delay, Arp, Side Chain) VOICE MODE DEPTH can vary different parameters in each mode.
The SX80s offer the power and presence of floorstanders at an unrivalled price point. They combine our years of h-fi expertise with cutting edge custom components to bring you a musical performance of scale and enjoyment.The SX80’s crossover is optimised for the most neutral, smooth and phase linear response, giving you a natural and immersive sound stage.All the decisions we make whilst designing our products are made to make your music and movies sound amazing. The SX80s use highly optimised woofer magnet systems to deliver controlled bass and high efficiency.We use a specifically treated paper cone to provide a smooth and even frequency response. And our silk dome tweeter delivers perfect accuracy and detail to ensure you hear every beat and every line of your music and movies exactly as they were intended.Specifications:Sensitivity: 87dBFrequency Response: 40Hz – 20kHzImpedance: 8 OhmsDrive units: 2 x 165mm (6.5’’) woofers1 x 25mm (1’’) silk dome tweeterPorted: 1 frontColour: BlackDimensions: (WxHxD): 240 x 980 x 338mm (9.4 x 38.6 x 13.3″)Weight: 16.9kg (37.3lbs) each
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go. Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.
Featuring the premium WA305 instrument cable and QLXD1 wireless bodypack transmitter, QLXD14 combines professional features with simplified setup and operation.Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.QLXD1 Wireless Bodypack Transmitter quickly syncs with a wireless receiver over IR at the push of a button and maintains a clear, uninterrupted signal over its entire range. Specifications:64 MHz tuning bandwidth (region dependent)More than 60 preset compatible channels per frequency band (region dependent)Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channelDigital predictive switching diversity ensures solid RF connectionAES 256-bit encryption for secure wireless transmissionUp to 60 dB of adjustable audio gainHigh-contrast LCD menu and controls with lockout featureAudio and RF LED meters with peak indicatorDetachable ½ wave antennasMic / line switchable XLR output¼" Instrument outputDurable aluminum construction with brushed finishOver 120 dB of dynamic range: no transmitter gain adjustments neededAES 256-bit encryption for secure transmissionOptional Shure SB900 lithium ion rechargeable battery reports remaining runtime in hours and minutesExternal charging contacts for docked chargingBacklit LCD with easy to navigate menu and controlsSelectable display mode showing group/channel, frequency, or battery runtime4-Pin male mini connector (TA4M)Rugged metal constructionDetachable ¼ wave antennaFrequency and power lockout
Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.With an interchangeable BETA58A® microphone cartridge, the QLXD2/BETA58A Handheld Wireless Microphone Transmitter is ideal for wireless vocals in presentation spaces, music venues, and houses of worship.Specifications:64 MHz tuning bandwidth (region dependent)More than 60 preset compatible channels per frequency band (region dependent)Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channelDigital predictive switching diversity ensures solid RF connectionAES 256-bit encryption for secure wireless transmissionUp to 60 dB of adjustable audio gainHigh-contrast LCD menu and controls with lockout featureAudio and RF LED meters with peak indicatorDetachable ½ wave antennasMic / line switchable XLR output¼" Instrument outputDurable aluminum construction with brushed finish24-Bit digital audio qualityIncredibly efficient RF spectrum usageQuick syncing with a wireless receiver over IR at the push of a buttonClear, uninterrupted signal over the entire operating range AES 256-bit encryption for secure transmissionOver 120 dB of dynamic range: no transmitter gain adjustment needed1, 10 mW selectable RF output powerOptional Shure SB900 lithium ion rechargeable battery reports remaining runtime in hours and minutesExternal charging contacts for docked chargingBacklit LCD with easy to navigate menu and controlsSelectable display mode showing group/channel, frequency, or battery runtimeRugged metal constructionFrequency and power lockout
Padded electric guitar gig bag, Large accessory pouch
Lola is a completely reimagined headphone that brings new levels of detail to your listening experience. It’s a headphone the true music listener—designed to help you get closer to your music, not just make a fashion statement. Everything from Lola’s revolutionary form and fit to its massive custom drivers was designed to help you rediscover your favorite music. Too many headphones today are designed as fashion accessories. We designed Lola with superior sound as the ultimate goal. From the new lightweight multi-jointed design to earcups that provide premium sound isolation and clarity, we completely reimagined the form and functionality—without any preconceived notions about what headphones are “supposed” to look like. You’ll hear the difference immediately.When it comes to great sound, there’s no substitute for the movement of air. We optimized every aspect of Lola’s design for performance—from large 50mm premium drivers, to huge enclosures that maximize the volume of air around the drivers. The airtight, 100% sealed enclosure consists of a thick wall that’s heavily reinforced. This makes the enclosures extremely strong and resistant to vibration and flexing, creating a stable platform for the drivers to deliver accurate and inspiring sound. Lola’s holistic design delivers full-range sound that’s tight and powerful in the low end, articulate and warm in the mids, and extended, with accurate high-frequency response.Looking for an amped up version of Lola? Check out MO-FI with a built-in audiophile amplifier.Blue Lola Headphones at a Glance: DRIVERS• Type and size:50mm, fiber-reinforced dynamic driver• Impedance:42 ohms• Frequency response:15Hz-20kHz• Enclosure details:Sealed enclosure with tuned damping materialsHEADPHONES• Weight:397 g (14 oz)• Outer dimensions (closed):21cm x14cm x12cm (8.27" x 5.51" x 4.72")• Outer dimensions (open):18cm x 29cm x 12cm (7.09" x 11.42" x 4.72")
TASCAM’s TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio. Features:Microphone capsule assembly features an 18mm pure aluminum diaphragmCardioid polar patternFrequency response: 20Hz to 20kHzSensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)Phantom power requirement: 9 - 48V DCOutput impedance : 200ohm +/-30% (at 1kHz)Load impedance : >1k ohmMax SPL : 136dB (at 1kHz=1% THD)S/N ratio : 77dBHousing : Die cast zincDimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inchIncludes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
The A1 is a three channel amp, offering two channels of instruments and a channel dedicated to playback. The first instrument channel provides comprehensive EQ and functionality. The second is an optional instrument or microphone channel with a simple, more basic EQ. Finally the third channel is anRCA/Phono input that allows the plugging in of an external sound source – iPod/CD or similar line level device. Whilst small and lightweight, the A1, at 65 wattsRMS, provides plenty of punch and volume through its custom Celestion 10' driver and a Hi frequency horn. All housed in a dual position cabinet which allows the user to lean the amplifier back into kick-back monitor position so the speaker points towards your face, in turn allowing for more direct monitoring at a lower level. Specifications:Power: 65 WattsDriver: 1 x 10''Effects: 16 digital effectsChannels: 3Εqualizer: YesOutputs: XLR DI OutInputs: XLR, Jack, Hi ZControls: Master, Effect volume, Enhance, EQDI Socket: XLR Di Out
The RE20 Industry Standard Variable-D dynamic cardioid microphone is the favorite among broadcasters and sound engineers worldwide. Variable-D design and heavy-duty, internal P-pop filter reduces proximity effect. Internal element shock-mount reduces vibration-induced noise. Bass roll-off switch. Impedance, Audio Frequency Response 80 - 15,000 Hz, Impedance, Low-Z balanced 150 Ω, sensitivity 1,4 mV/Pascal.Specifications:Polar Chart: CardioidCapsule Microphone: DynamicMicrophone Categorie: Large DiaphragmMicrophone Type: WiredFrequency Response: 45-18000Application: Broadcast, Studio
