Audio Technica BP4025

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Specifications:

• Element: Fixed-charge back plate permanently polarized condenser

• Polar Pattern: X/Y Stereo

• Frequency Response: 20-17,000 Hz

• Low Frequency Roll Off: 80 Hz, 12 dB/octave

• Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa

• Channel Balance: <2.5 dB

• Impedance: 170 ohms

• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)

• Dynamic Range: 131 dB, 1 kHz at Max SPL

• Signal to Noise Ratio: 80 dB, 1 kHz at 1 Pa

• Phantom Power Requiremens: 11-52V DC, 7 mA typical (both channels total)

• Switch: Flat, roll-off; 10 dB pad (nominal)

• Weight: 269 g (9.5 oz)

• Dimensions: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter

• Output Connector: Integral 5-pin XLRM-type

• Cable: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end