Live Streaming - Gaming - Podcasting

BEYERDYNAMIC DT-770 PRO, studio headphone, dynamic, closed, impedance 80 Ohm, pressure level 96dB/SPL, frequency response 5-35.000 Hz, diffusfeldentzerrt, weight 270g incl. cable, 3,5mm stereo jack with adapter 6.3mm, cable lenght 3m, coiled cable.

The Pod Pack 1 is a professional upgrade to any announce studio.  The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.Features:Included USB cardioid condenser microphoneAll-steel constructionDual suspension springs for stable angleFully adjustable - microphone can even be suspended upside-downClamps to nearly any desk or tableUSB cable includedSpecifications:Element: Back electret condenserElement Diameter: 13mmPolar pattern: CardioidFrequency response: 20 - 17,000 HzSensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)Output impedance: 100Ω +/-30% (at 1kHz)Load impedance: >1kΩSelf noise: 16dBAMax SPL: 132dB (@ 1kHz < 1% THD)Signal to Noise ratio: 78dBAdjustable height and angleTelescoping range: 15.75" - 27.5" (40cm - 70cm)Weight: 13.5oz (382g)

The K and M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand. Specifications:Goose neck diameter: 8 mmGoose neck length: 330 mmMaterial: steelScrew-on to: tube diameter up to 30 mmShield diameter: 130 mmType: blackWeight: 0.22 kg

With black lacquered cast iron base of Ø 10,5 cm and a black steel pipe with a screw base of 5/8” and a height of 10 cm. color : black Weight 1 kg 

New extensible arm microphone stand featuring fixed elevation arm, fixed desktop stand and clip-on base desktop stand. Suggested for radio installations and dubbing studios. Available in matt black (DST260) finish.

Featuring a tight polar pattern and tailored-for-voice frequency response, the RODE Procaster is perfect for every application where a great sounding, rugged microphone with superior ambient noise rejection is demanded.RΨDE Procaster main features include:Broadcast quality soundHigh output dynamic capsuleBalanced, low impedance outputInternal shock mounting of capsule for low handling noiseInternal pop-filter to reduce plosivesRobust, all metal constructionAcoustic Principle: DynamicDirectional Pattern: CardioidFrequency range: 75 Hz - 18 kHzOutput impedance: 320OSensitivity: -56 dB re 1 Volt/Pascal (1.6 mV @ 94 dB SPL) +/- 2 dB @ 1kHzWeight: 695gDimensions: 214mmH x 53mmW x 53mmD

Dynamic studio microphone with a cardioid polar pattern, frequency response: 50Hz-20kHz, bass roll-off switch, mid-boost switch, 150ohm, shielded against broadband interference, fixed stand adapter, XLR plug, includes windscreen.

Like its name suggests this RODE microphone was specifically designed ‘ON-AIR’ applications where wide frequency response and low distortion are demanded. 
Winner of the Radio World/US National Association of Broadcasters (NAB) ‘What’s Cool’ award in 1998, the Broadcaster has become an industry standard when studio sound quality is required for on air applications. 
Utilizing an Australian designed and manufactured RΨDE 1” externally biased condenser transducers, the Broadcaster features a switch-able high pass filter to remove low frequency rumble. A unique ‘ON-AIR’ LED indicator can be switched “on” or “off” by shorting contacts on the 5 pin audio connector. This feature allows console operators to warn the ‘Talent’ that the mic is live.    •    Acoustic principle: Externally polarised 25mm (1”) condenser    •    Directional pattern: Cardioid    •    Frequency range: 20 Hz ~ 20 kHz    •    Output impedance: 40Ω    •    Signal noise ratio din iec 651: >80 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)    •    Equvalent noise: 114 dB (per IEC651, IEC268-15)    •    Power supply voltage: P48, P24 phantom    •    Weight without battery: 577g    •    Weight with battery: 1.3kg    •    Dimensions width: 167mm    •    Dimensions depth: 50mm    •    Dimensions height: 50mm

The FC 1 MKII was designed with classic large diaphragm condenser microphones in mind. We wanted to make an affordable mic with some of the characteristics of the good old German models.  The FC 1 has a center-terminated capsule just like in the old days, adding some harmonic distortion and a sweet top to the sound. This design also gives the mic an ability to handle louder sounds without harshness or other problems. The output transformer can handle bass really well and still give you that extra fat sound that only tubes and transformers can deliver.  The retro EQ in the FC 1 is set to deliver maximum sound quality with as many sound sources as possible at a price anyone can afford. It sounds great on vocals, acoustic guitar, percussion, amps, piano, leslie, drums, and more.

Pop Shield for stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand.Specifications:Dampens the plosives (when you pronounce a p or a b) and protects your mic during voice recordingsFilter with double acoustic screen made from high quality nylon meshAdjustable universal clamp fixes securely to any mic standFlexible metal goose neck for precise and stable positioning16 cm diameter

Straight, Tripod with Fixed Length BoomHeight adjustment range: 37.75" to 62" - 95.9 to 157.5cmBoom length: 30" - 76.2cmDiameter of leg spread: 27.25' - 69.2cmFolded height: 38" - 96.5cmWeight: 4.2lb - 1.9kg

Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips.The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand new driver membrane was developed.The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.Features:Exclusive cone technology offering acoustic transparency and excellent dynamicsPrecision and neutralityTotal control over the audio spectrumExcellent isolationCompact, rigid carryin