Vinyl Lovers

Quality Affordable Turntable with Twin Gimbal Tonearm, Built-in Preamp, and Ortofon CartridgeFor the true vinyl enthusiast, the Dual CS 518 turntable is equipped with a sophisticated twin gimbal tonearm design using pivot ball-bearings for optimal precision. This superior tonearm has the ability to guide even high-end cartridges through your record grooves with the greatest degree of precision and reliability.Included with the CS 518 is an Ortofon 2M Red MM phono cartridge and a switchable MM-phono preamplifier, making this 'table ready-to-run after easy set-up. A hinged dust cover completes the package."Priced to Be Heard"England's What Hi-fi? magazine gave the CS 518 its top rating of Five Stars, for reasons of "dynamic and expressive sound, good level of insight, easy to set up and use… It’s well priced and sonically talented enough to be a viable alternative to the best at the price.""Priced to be heard," proclaims Michael Fremer's analogplanet.com review for November 22, 2021. "The 'star' of the show here is the twin-gimbal ball-bearing tonearm, which though I have no way of measuring, has a precise 'feel' and sounded so, as well negotiating tough to track records especially on vocal sibilants. The servo-controlled adjustable 3 speed D.C. motor is also a stand-out feature.""Easily Worth the Asking Price""The CS 518 is not inexpensive, but the workmanship and the sound it produces make it easily worth the asking price," notes Thom Moon, soundstageaccess.com, November 1, 2021. "It’s easy to set up, it offers fine sound quality, it’s well constructed, and it looks good doing its part. If you’re in the market for a turntable in this price range… give the Dual CS 518 a very close look. I’m betting you won’t regret it.""Another pleasant chapter is added to the glorious history of Dual turntables with this device," writes Michael Lang, stereo-magazine.com, October 7, 2021.Twin Gimbal Tonearm and Precision PlatterThe CS 518 boasts a straight, statically balanced tonearm with an advanced twin gimbal design. Four precision pivot ball-bearings provide smooth and accurate tracking. The adjustable tonearm features provide the option to change the phono cartridge in the future should you wish to upgrade and to alter the tracking force and anti-skating accordingly.The precise aluminum die-cast platter uses a heavy rubber mat for resonance damping along with a solid platter bearing with a hardened steel spindle in a brass bushing.Selectable Electronic Speed ControlA turntable as easy to use as the CS 518 would never insist that you wrestle with belts to change speeds. Operation couldn't be simpler. The precise optical speed control lets you select 33 rpm, 45 rpm, or even 78 rpm with the twist of a knob.MM Phono Preamplifier Built-inThere is no obligation to use an outboard phono preamplifier with CS 518. This turntable comes with a built-in phono preamplifier. It can be either connected to the phono input or the line input at the amplifier. The built-in phono stage can switched on or off via a switch in the back. If you choose to, you can bypass the phono stage and use one of your own, or one built-into your amp or receiver of choice instead.Factory Installed Ortofon 2M Red CartridgeAn Ortofon 2M Red moving magnet phono cartridge is pre-mounted and precision-aligned. The 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. It features a new, improved engine that provides an increased output of 5.5mV, an optimized sound reproduction, and a high level of sonic accuracy.

The CS 529 offers maximum listening pleasure thanks to the twin gimbal tonearm bearing and high-quality pivot ball bearings for optimum record tracking.The classic dual tonearm moves autonomously at the touch of a button - simply place the record on the turntable and press the start button. Operation is convenient via the terminal on the device or externally via Bluetooth.Use the Bluetooth function to transmit the audio signal or control the device via a smartphone or tablet. Experience convenient operation and first-class sound with the CS 529 from Dual.Plinth:Solid MDFSubchassis construction with rubber dampersBluetooth for audio and remote-control functionsSurface option: Walnut wood veneerPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingHardened steel spindle in a brass bushingTonearm:Twin GimbalAll functions are fully automatic or manualSolid aluminium gimbal constructionPivot ball-bearingsDrive:DC – Belt/RegulatedOptical speed control at the motorRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

The CS 529 offers maximum listening pleasure thanks to the twin gimbal tonearm bearing and high-quality pivot ball bearings for optimum record tracking.The classic dual tonearm moves autonomously at the touch of a button - simply place the record on the turntable and press the start button. Operation is convenient via the terminal on the device or externally via Bluetooth.Use the Bluetooth function to transmit the audio signal or control the device via a smartphone or tablet. Experience convenient operation and first-class sound with the CS 529 from Dual.Plinth:Solid MDFSubchassis construction with rubber dampersBluetooth for audio and remote-control functionsSurface option: Walnut wood veneerPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingHardened steel spindle in a brass bushingTonearm:Twin GimbalAll functions are fully automatic or manualSolid aluminium gimbal constructionPivot ball-bearingsDrive:DC – Belt/RegulatedOptical speed control at the motorRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

The Dual CS 329: Simplicity with sophistication for the perfect introduction to analogue music playback. With Plug & Play you get a pre-assembled complete package - plug it in and get started straight away!The fully automatic CS 329 offers convenient convenience as the tonearm swivels, lowers and raises automatically. Simply place the record on top and press the start button. Experience uncomplicated music enjoyment.Plinth:Plastic / MDFElastomer vibration absorber inside the feetRemovable dust coverPlatter:Aluminium Die-castPrecise aluminium die-castHeavy rubber mat for resonance dampingTonearm:Straight, statically balancedPlug & Play: all adjustments are factory fixedAutomatic or manual operationDrive:DC- Motor / BeltRubber mountings for vibration decouplingPrecision cut belt for lower wow & flutter

Dual direct drive concepts have been synonymous with outstanding durability and quality for decades. The CS 618 impresses with a quiet direct drive that keeps the platter speed precise and silent.The turntable's twin gimbal precision tonearm is further optimised by the Ortofon 2M Blue to deliver outstanding sound quality. Discover an even more precise and improved audio reproduction for a first-class listening experience.With an electronic motor stop and automatic lift at the end of the record, the CS 618Q offers the highest level of operating comfort for a manual turntable. In addition, there are the other comfort elements of the CS series. The stepless antiskating can be easily adjusted using a rotary knob with a clear scale. The electronic adjustment of the three speeds is conveniently carried out via a rotary switch, while the appropriate pickup can be easily changed using the headshell.Plinth:Solid MDFOptions: Black vinyl, gloss paint, walnut veneerSwitchable auto-stop functionElastomer vibration absorber inside the feetPlatter:Aluminium Die-castHeavy and precise aluminium die-cast platterHardened steel spindle integrated in the direct-driveHeavy rubber mat for resonance dampingTonearm:Twin GimbalSwitchable automatic tonearm lift functionSolid aluminium gimbal constructionFour fine pivot ball-bearingsDrive:Direct-driveQuartz stabilised for 33 / 45 / 78No vibrations through coreless inductorsDouble shielded to eliminate magnetic fields

Dual direct drive concepts have been synonymous with outstanding durability and quality for decades. The CS 618 impresses with a quiet direct drive that keeps the platter speed precise and silent.The turntable's twin gimbal precision tonearm is further optimised by the Ortofon 2M Blue to deliver outstanding sound quality. Discover an even more precise and improved audio reproduction for a first-class listening experience.With an electronic motor stop and automatic lift at the end of the record, the CS 618Q offers the highest level of operating comfort for a manual turntable. In addition, there are the other comfort elements of the CS series. The stepless antiskating can be easily adjusted using a rotary knob with a clear scale. The electronic adjustment of the three speeds is conveniently carried out via a rotary switch, while the appropriate pickup can be easily changed using the headshell.Plinth:Solid MDFOptions: Black vinyl, gloss paint, walnut veneerSwitchable auto-stop functionElastomer vibration absorber inside the feetPlatter:Aluminium Die-castHeavy and precise aluminium die-cast platterHardened steel spindle integrated in the direct-driveHeavy rubber mat for resonance dampingTonearm:Twin GimbalSwitchable automatic tonearm lift functionSolid aluminium gimbal constructionFour fine pivot ball-bearingsDrive:Direct-driveQuartz stabilised for 33 / 45 / 78No vibrations through coreless inductorsDouble shielded to eliminate magnetic fields

Nagaoka is a world-renowned manufacturer of record needles, celebrating its 80th anniversary this year. The MP cartridge, which has been used around the world for many years, has been redesigned and the new MM cartridges JT-80/JT-1210 have been released. We will continue to support the analog record culture that will be loved by record lovers all over the world.Design Points1. Continuous design from tonearm to the stylus tip. The slanted front panel allows for easy viewing of the tip and easy stylus replacement.2. The small cylinder on the mounting surface makes it easy to put the stylus on and the light body plays sound as it slides on the board.3. The upper part is blocky to match with the tonearm, contrasting with the columnar shape of the stylus.The slim and simple design gives a sense of continuity from the tonearm to the stylus tip. Reducing the number of parts leads to a reduction in vibration. In addition, the bare screws that join the head shell on previous products have been integrated inside the body to reduce exposure and resonance. Besides traditional listeners, these evolutions are also oriented well towards modern pop and jazz, supported by a wide range of genres.Size：Width 18.1mm X Length 26.2mm (Terminal Pin included）X Height 18.5mm、Weight 6.7g Materials: ABS resin, Comparing with our long seller, MP (Moving Permalloy) type cartridge 8g weight Reducing weight by using cylindrical structure、as a MM (Moving Magnet) cartridge , succeeded in improving the sound quality.With a worldwide following, this product combines ease of use and design at a high level. Designed to enhance the visibility of the stylus and ease of operation when replacing The thin handle designed for dropping the stylus on the record gently and the simple construction of the body were highly praised. The functional design and the high perfection of each component will satisfy the users as well.In order to get closer as possible to the ideal frequenxy response, Nagaoka adjusted the hardnss of the damper rubber and core materials. You can feel the difference between the MP and MM. While the MP and MM have the same power generator, the structues of the cantilever are different. Also by selecting and adjusting the damper rubber and stylus tip, Nagaoka found the best balance.

Piano Black, Acrylic Platter, Ortofon 2M Red CartridgeOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Piano Black, Acrylic Platter, Ortofon 2M Red CartridgeMusic Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Description The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a popup stylus target light; and a removable hinged dust cover.Direct-Drive with High-Torque Motor: Turntable Designed for DJsThis high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.Plays 33-1/3 RPM, 45 RPM and 78 RPM RecordsDirect-Drive with High-Torque MotorS-Shaped TonearmAT-XP3 Dual Magnet™ Phono CartridgeFully Manual Operation: Take ControlWhether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.Cartridge Assembly Line Circa 1962: Analog Expertise Spanning More Than 55 YearsWe got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Description The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a popup stylus target light; and a removable hinged dust cover.Direct-Drive with High-Torque Motor: Turntable Designed for DJsThis high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.Plays 33-1/3 RPM, 45 RPM and 78 RPM RecordsDirect-Drive with High-Torque MotorS-Shaped TonearmAT-XP3 Dual Magnet™ Phono CartridgeFully Manual Operation: Take ControlWhether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.Cartridge Assembly Line Circa 1962: Analog Expertise Spanning More Than 55 YearsWe got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

DescriptionThis fully manual turntable is after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.Taking Your Vinyl to the Next Level: Crystal Clear Bluetooth® Wireless AudioCompatible with most Bluetooth® speakers and headphones, the LP120XBT-USB pairs seamlessly to your devices. Simply press the Bluetooth® button, located next to the tonearm, for 4 seconds and connect to your chosen speakers, it’s that simple.You can also connect to Bluetooth® wireless headphones, giving you the flexibility to enjoy your vinyl records without the clutter of wires or having to be near your turntable and music setup. Sink into your comfiest chair and wirelessly enjoy over half a century of Japanese audio engineering and sound excellence.Bluetooth 5.0 TechnologyUSB and Analog OutputPlays 33-1/3 RPM, 45 RPM and 78 RPM RecordsAT-VM95E Dual Magnet™ Phono CartridgeMultiple Connectivity Options: Plug and PlayThe LP120XBT-USB is designed to give you a high-quality listening experience that’s easy to enjoy right out of the box. A built-in preamp means the LP120XBT-USB can be plugged directly into your existing speakers, or, with the simple press of a switch, connect wirelessly via Bluetooth® 5.0 to any bluetooth compatible speaker, supported home assistant or wireless headphones. Space saving with no external amps, no clutter and no mess; just incredible sound and reliable features designed with over half a century of Japanese audio innovation.The LP120XBT-USB can also be plugged directly into your computer, for audio playback via your PC speakers or for simple and easy backup and transfer of your vinyl records to playback on your smart devices when on-the-go.Over 55 Years of Analog Excellence: Iconic Sound Loved The World OverThe LP120XBT-USB and LP120XUSB line are some of the best-selling turntables around the world, with over 2,500 5-star reviews on Amazon and consistently high feedback from beginners, music lovers, professionals and audiophiles. We designed the LP120XBT-USB with you in mind, eliminating the need for expensive amps or convoluted speaker setups. Based on the iconic DJ turntables and almost 60 years of Japanese audio innovation, the LP120XBT-USB lets you plug directly into your favourite speakers, or enjoy your vinyl collection wirelessly via Bluetooth® to your smart speakers or wireless and truly wireless headphones.

The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

The MK2 Model 12 mkII is designed and precision engineered for pure audio reproduction. The all new highly advanced drive system provides much improved speed control, accuracy and stability. This best-selling and very capable precision turntable has evolved to deliver the perfect listening experience.The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME 309 tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

As a member of the M2 family this tonearm is built by enthusiasts for enthusiasts and among its extensive features include, vertical and horizontal tracking adjustment, tungsten balance weights housed in satin chromed brass sleeves. Double draw-pin detachable headshell with azimuth adjustment and height adjustment by thumb wheel enabling its use with wide range of both cartridges and turntables.BuildS2-R Aluminium shell detachable and interchangeable without disturbing cartridge or wiring. Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm. Stainless steel ground horizontal spindle carried in substantial yoke in lOmm diameter precision ball race bearings. Stainless steel ground vertical spindle with integral 16mm diameter flange to couple the spindle with the yoke. The 23mm diameter steel pillar is heat treated, ground, internally honed and carries two 17mm diameter precision ball race bearings widely spaced to resist tilt. Internal wiring is Silver Litz.DampingInternal constrained layer damps minute residual vibrations making the tone-arm acoustically inert.AdjustmentsUnique headshell to tone-arm coupling readily allows cartridge azimuth adjustment. The Anti-Skate control operates through an Anti-Skate weight and filament and is adjustable for up to 5g of cartridge vertical tracking force (VTF). The lowering/raising control gives a smooth positive action and allows for the lifting height of the cartridge above the record to be adjusted. Tungsten-alloy balance weight inserts allow for maximum centre of gravity shift to balance a greater range of cartridges. Up to 38g in S2-R headshell and direct plug-in heads up to 46g. Precise vertical tracking force up to 5g is applied in 0.5 increments via the rider weight and graduated wayrod. Thumbwheel cartridge vertical tracking angle (VTA), height adjustment. Bedplate affords +/- 12.0mm movement to facilitate horizontal tracking angle (HTA) adjustment.

An internally damped precision tonearm of highly polished stainless steel provides sparkling uncoloured reproduction offering pivot-stylus dimensions covering virtually all turntable requirements. The M2 Series tonearm is available in 9, 10 & 12 inch versions and offers at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings and a level of stiffness and rigidity to suit all types of cartridge. These precision made tonearms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance. The headshell is pressure die-cast in magnesium for lightness and rigidity. A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tighteningBuildThe M2-9 shell is pressure die-cast in magnesium for lightness and rigidity. Series M2-9 is the standard arm having a pivot-stylus dimension of 233.2 mm (9.18”) and will therefore be the one most frequently used. Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks. Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine or inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.DampingThe internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.AdjustmentsA collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening. 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator.
220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control.
Low friction, fully shielded races for both axes.
Sliding base for tracking adjustment.
Thumbwheel height adjustment.
Traditional pattern anti-skate. 

The HANA-Umami WayThe HANA-Umami Red high-end moving coil cartridge combines brilliant materials and classic Japanese techniques with modern audio engineering. Ebony wood, rare-earth magnets, precision-cut diamond, high-purity copper wires, Urushi lacquering, and CNC machined Duralumin synergize under the vision of Hana designer Okada-san.The synergistic relationship in MC generators between magnet, armature, and coil windings is a critical aspect of outstanding cartridge design; and like a signature dish at a Michelin 3-star restaurant, every element and detail working in concert results in a memorable and emotional experience.All the major parts in a HANA-Umami Red are manufactured in house by Excel Sound with its rich history spanning over 50 years. Excel’s highly trained craftsmen skillfully hand assemble the HANA-Umami Red ensuring an intensely musical experience furthering the HANA “Brilliant and Gorgeous” sound quality.Umami Sound - Wonderful Taste in Music

One of the world’s best High Output Moving Coil cartridges, the MH combines the technological advances of the Hana M Series with the optimal interface for moving magnet phono stages.M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution. Delrin© cartridge body – Advanced Materials The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low level information and enhance dynamic range. Cryogenic Processing - Unique Technical Treatment Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality. Brass Cap with Threaded fittings - Superior Mechanical Interface The Delrin© cartridge body features an integral machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables. Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.

Building upon the foundation of the critically acclaimed HANA sound, the ML aspires toward affordable perfection and represent the further evolution of the “Brilliant and Gorgeous” quality that has earned HANA its worldwide reputation.M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution.High Purity copper wire – Higher Specification Part Very high-purity copper wire is used for winding the ML coil with a new low impedance generator for optimized performance with a broader range of phono preampsDelrin© cartridge body – Advanced Materials The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low level information and enhance dynamic range.Cryogenic Processing - Unique Technical Treatment Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality.Brass Cap with Threaded fittings - Superior Mechanical Interface The Delrin© cartridge body features an integral machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables.Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.

The Model 6 Classic is a class leading integrated turntable delivering unique sonic performance, engineering excellence and definitive SME craftsmanship. Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables.A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range. Machined aluminium finishers fitted to the isolation feet complete the look of the Classic.The Model 6 Classic is complimented with the M2-9R tonearm with extensive features including thumbwheel vertical tracking adjustment, tungsten balance weights, double draw-pin detachable headshell with azimuth adjustment. The tungsten alloy balance weight allows for a maximum centre of gravity shift to balance a greater range of cartridges up to 38 grams and with a direct plug-in head up to 46 grams.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

DescriptionHigh-end phono preamplifier Today, many amplifiers do not have a specific phono cartridge input. The MINI 2 Phono is an ideal phono preamplifier for these hifi systems. It accepts MM and high-output MC cartridges and offers an audiophile music experience at an entry-level price.Advanced circuitry and shielding Advanced circuitry keeps noise and distortion at a surprisingly low level. The metal case shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, MINI 2 Phono can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. MINI 2 Phono can easily be connected to a line-input (AUX etc) of your amplifier.

Our best budget cartridge!The music hall Spirit is a supremely musical, moving magnet phono cartridge.Developed and built specially for Music Hall by Audio Technica, this little gem incorporates a low-mass cantilever and an elliptical stylus tip that gets down deep into the grooves (pun intended) and sets the music free.The Spirit is as easy to use as it is compatible, performing admirably with a wide range of tonearms and turntables. Built for longevity, it features a user-replaceable stylus.

A solid upgrade over entry-level cartridges…Developed and built specially for Music Hall by Audio Technica, the Melody offers exceptional performance at an affordable price.The cartridge incorporates a low-mass aluminum cantilever which responds more quickly and accurately to undulations in the record groove thus producing a clean clear distortion-free sound.The Melody is easy to use and is compatible with a wide range of tonearms and turntables. Built for longevity, it features a user-replaceable stylus.

DescriptionFormerly known as the hunt E.D.A., the Music Hall Record Cleaning Brush contains over 1,000,000 anti-static carbon fibers.The fibers are in two rows with a static grounding pad centered between. The grounding pad supports the tiny carbon fibres and keeps them erect so they can dig down deep into the groove and extract trapped dust. Look at a record; it contains microscopic undulations inside the groove wall smaller than a human hair that the naked eye cannot see. This is how music is stored on an LP. And this is why fat pads will not do.A fat pad can’t get down into the groove. It simply brushes over the top and removes the surface dust. The real culprit is the dust that’s trapped deep in the record groove. The only way to remove this dust is with the Music Hall Carbon Fiber Brush.It’s super easy to useDon’t push it down on the record; simply support the back of the brush with your hand and let the brush’s weight do the work. You want to keep those bristles erect, not rolled over. The Music Hall Carbon Fiber Brush comes with its own support stand, which also doubles as a cleaning tool. Slide the stand back and forth across the carbon fiber bristles to remove the dust. This will keep the carbon fibers clean and free from your messy hand oils.

The aztec blue mat reduces noise and lets the music flow.How aztec blue worksHow does this work? The secret is the unique design of the mat. 3 distinct layers of cork work in concert to decouple the record from the platter and isolate it from vibration. The large bottom layer grips the platter, providing a perfect non-resonant base for the upper spoke-style layer that lifts and separates eight isolation platforms. A single cork center that supports the record label and the isolation platforms around the outer edge of the mat decouple and float the record above the platter. This lowers record vibration and reduces acoustic feedback. Stylus tracking is improved and record wear reduced.The perfect materialCork is the perfect material. It sucks up unwanted vibrations and releases the life and energy of the music. It’s naturally non-static and non-adhesive making the mat perfectly safe for use on all platters, and it won’t harm your records.Cork grips the record better than felt so there’s less record slippage and fewer timing errors. The mat is thin, lightweight, and generally doesn’t require a VTA adjustment. Listen for yourself, the improvement is easy to hear.—The aztec blue mat reduces noise and lets the music flow. Try the it and amp-up the sound of your vinyl!

Kick out the jams with our cork record mat!How mat worksInstruments pop to life. Crackle is reduced. Vocals are clearer and more dramatic. The background is quieter, soundstage wider and deeper. How does this thing work? The secret is in the 12 isolation discs surrounding the outside of the mat and the single larger disc for the center label. The discs lift and support the record while floating it above and decoupling it from the platter. This lowers record vibration and reduces acoustic feedback. Stylus tracking is improved and record wear reduced. The mat eliminates the grunge and leaves behind a rich, clear, dynamic sound.The perfect materialCork is the perfect material. It sucks up unwanted vibrations and releases the life and energy of the music. It’s naturally non-static and non-adhesive making the mat perfectly safe for use on all platters, and it won’t harm your records.—Cork grips the record better than felt so there’s less record slippage and fewer timing errors. The mat is thin, lightweight, and generally doesn’t require a VTA adjustment. Listen for yourself, the improvement is easy to hear.

mmf Mark1 Turntable with phono preamp and Bluetooth.Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

mmf-2.3 TurntableThe Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

The Hana SH combines high output with high resolution, courtesy of its special coil design and Shibata stylus. Compatible with standard MM phono stages, a high-output MC provides dynamics, drive, and excellent stereo imaging. With over 50 years of experience in cartridge design and manufacture, Excel Sound builds many of the most highly regarded high-output MC cartridges.  

Hana SL is the most reviewed and awarded Hana cartridge to date. It is distinguished by its black body and a Shibata stylus expertly mounted to its aluminum cantilever. The Hana SL features tighter channel balance, greater channel separation, and improved high-frequency extension. “A first-class MC cartridge” – STEREO (Germany)  “Remarkably smooth frequency response…terrific value for the money.” – HiFi World (UK) “In the same class as a cartridge costing 10x the price.” – TNT Audio (France) Stereophile Recommended Component USA The Absolute Sound USA Golden Ear Award 2017Rocky Mountain International HiFi Press Award winner  2018 and 2019

The Hana EH high-output moving coil cartridge represents the best way to upgrade from “starter” MM cartridges that typically come packaged with most entry-level turntables. Weighing in at only 5 grams, and possessing great tracking ability, the Hana EH cartridge’s distinctive moss green body houses a special cross-coil generator, reproducing great bass and dynamics. The elliptical stylus mounted to an aluminum cantilever easily extracts the music in the groove as it effortlessly traces you LPs.The EH is plug-and-play compatible with MM phono stages found in integrated amplifiers and AV receivers. 

The Hana EL provides high-end musical performance from a low-output moving coil cartridge at an extremely attractive price. Handmade in Japan, the EL uses ALNICO magnets and affords the listener the textural, imaging, and musically involving qualities associated with the best MC cartridges.Long prized by audiophiles and music lovers, affordable low output MCs such as the EL are a perfect match to today’s generation of high-gain phono stages.

The Fono MM MK5 phono stage has been designed to be effective, easy to use and above all, to reproduce music. The Fono MM MK5 uses a fully discrete, cascaded, complementary amplifier input stage, a configuration designed to optimise the performance of your moving magnet cartridge. Now housed in a brand new redesigned case to match the new Fono MC and Rega’s latest range of electronic components offering a modern look guaranteed to integrate in to any hi-fi system.The perfect partnerThe aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same updated aluminium case as the Rega Neo and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits.

The latest member of our Rega MC cartridge range the Ania Pro uses our advanced Vital profile nude diamond stylus. This profile is designed to extract as much detail from the vinyl surface as possible. The Ania Pro delivers tight bass warm mid-ranges and accurate top end frequencies to offer a well balanced and detailed performance.Listen like a ProUsing our unique hand-wound micro coil found in the rest of the MC range, the Ania Pro is housed in a unique PPS highly rigid body, ensuring accurate construction and Rega’s three point fixing method which offers the optimum connection to the head-shell while automatically setting overhang. The new body is protected by a CAD designed, red rigid cover to protect the internal fine wires, making handling when fitting, safe and risk free.The Ania Pro features a super high-powered, neodymium magnet and a coil meticulously hand wound on to an iron micro cross.This miniature assembly allows us greater freedom to track the vinyl groove guaranteeing even more detail is extracted from the vinyl. All of these features combine to deliver a balanced and dynamic performance that will engage you with your vinyl like never before. The Ania Pro is the perfect partner for the Planar 3, Planar 6 or Planar 8 turntable and a factory fitted option is available for both Planar 6 and Planar 8. Please ask your retailer for details.

The RB3000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand-built by a team of highly skilled technicians. The R3000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge (cartridge sold separately).Advanced design, precision engineeringThe entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new, low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable.The RB3000 uses the latest award-winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.

Designed using the latest 3D CAD & CAM technology, the new RB880 is the culmination of almost 40 years of tonearm design experience. This tonearm features a new aluminium vertical bearing housing, a redesigned sleeve and vertical bearing shaft (both manufactured from stainless steel) to improve mounting stability and overall rigidity. The advanced tonearm tube is designed using intelligent redistribution of mass, ensuring this arm will exhibit fewer points of possible resonance.Fine tuning an iconThe extreme levels of stability achieved, coupled with almost friction free movement from the high precision hand matched bearing assemblies, guarantee to gather more information from your vinyl than ever before. You will also find a Rega made new low capacitance phono cables terminated with high specification phono plugs.Rega is famed for its tonearm designs. One unique characteristic of these designs is the achievement of near frictionless movement horizontally and vertically whilst having no measurable free play in the bearing assemblies. A brand new low mass precision engineered vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 8 turntable. The RB880 uses the latest Rega arm tube. Completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly using CAD design to blend the multiple varying tapers.Externally we have fitted a bespoke Rega designed low capacitance phono cable. Which uses an advanced phono plug assembly. This has only two parts to minimise joints and incorporates a twist and clamp design locking the plug to the terminal. The design increases connectivity and ensures the signal path is kept as clean as possible.

The legendary RB330Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing and our latest tonearm tube designed using intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance.Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before. Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers. Rega made, new low capacitance phono cable with Neutrik plugs. Improved lower friction, precision horizontal and vertical bearings.Rega is famed for its tonearm designs. One unique characteristic of these designs is the achievement of near frictionless movement horizontally and vertically whilst having no measurable free play in the bearing assemblies (and in reality one or two microns of pre load). So, why has Rega spent over thirty years and invested so heavily in this area of tonearm design where the removal of even microns of movement has been pursued?

The single speed RP78 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Using our latest 24 V motor technology the new Planar 78 is also fitted with the latest RB220 precision tonearm.For the Love of 78 RPM RecordsDesigned solely for the reproduction of 78 rpm records, we have omitted any unnecessary gimmicks allowing us to concentrate the manufacturing costs on the high quality parts necessary to reproduce records accurately. The minimalist design of the Rega Planar 78 and the use of extremely high quality components ensure that your turntable should last for many years.The RB220 offers astonishing performance and is one of Rega’s best selling tonearms. An evolution of the famous RB250, which was supplied as standard on early Planar 2 and P2 turntable, the RB220 uses our patent pending ultra lightweight high quality polymer bearing selected, high quality vertical and horizontal bearings.The tonearm uses our die-cast tube and the three point fixing technique based on the mounting design system. This system reduces stress on the plinth and tonearm and offers greater stability though the arm. All of which translates into more music for you the listener.

The reference Aura MC stage is the culmination of decades of electronic design development. We have created the ultimate, fully adjustable, three-stage, all symmetrical pre-amplifier designed purely to extract the very best performance from your moving coil cartridge and vinyl playback system. Design Innovation Built into a completely re-designed custom case, the Aura is dedicated to moving coil cartridges and stays clear of any compromises. We have avoided including any superfluous functions as they obstruct the signal path and degrade the sound quality. The Aura phono pre-amp incorporates remarkable and innovative design ideas. If you are a vinyl connoisseur, then the Aura MC is an absolute must for demonstration. First Stage The first stage is a symmetrical, complementary class A amplifier, using parallel connected Linear Systems ultra-low noise FET (Field Effect Transistor) transistors configured as a symmetrical compound pair input stage. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The input circuit configuration also alleviates the use of any coupling components between the cartridge output and the input stage FET transistors, which would degrade the sound. The complementary ultra-low noise FET transistors are carefully graded and matched for optimum performance. This stage drives the passive high-frequency part of the RIAA equalisation stage. Second Stage  The second stage is a symmetrical, class A, differential amplifier with a common base driver stage; this is also used as the active amplifier in the low-frequency part of the RIAA equalisation stage. Third Stage The third stage inverts the signal to provide the balanced output along with the output of the second stage; the third stage uses the same circuit topology as used in the second stage. The power supply is a symmetrical, discrete tracking power supply using fast diodes and a low noise voltage reference. Each stage has its own localised power supply and LED referenced current generators. To maximise headroom, the Aura has a power supply voltage, which is 60% higher than normally found in such a pre-amplifier. Very high quality, polypropylene capacitors have been used in the signal path. 1% tolerance polypropylene capacitors are used in the RIAA EQ stages and audio grade capacitors are used in the rest of the circuit. Gain, Mute and Mono switching is implemented using high-quality relays.

Fully Automatic Hifi-Turntable The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button. The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly. The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.