Wireless Microphones

EW-D EM1/2 19“ rack receiver for use with Evolution Wireless Digital handheld and bodypack transmitters.EW-D SKM-SRugged and versatile handheld transmitter for use with Evolution Wireless Digital receivers. Microphone module not included.Digital wireless eliminates noise, interference andstatic burstsUHF transmission greatly enhances range, reliabilityand scalabilityMobile App streamlines setup and operation and eliminates complicated menusAutomated setup creates reliable connections withminimal time and effortUp to 2,240 selectable frequenciesLithium Ion battery pack delivers up to 12 hours of operation (up to 8 hours of operation with AA batteries)56 MHz Bandwidth will allow for up to 90 channelsPreserves every detail of even the most dynamic performances with 134 dB transmitter dynamic range

EW-D EM1/2 19“ rack receiver for use with Evolution Wireless Digital handheld and bodypack transmitters.EW-D SKM-SRugged and versatile handheld transmitter for use with Evolution Wireless Digital receivers. Microphone module not included.Digital wireless eliminates noise, interference andstatic burstsUHF transmission greatly enhances range, reliabilityand scalabilityMobile App streamlines setup and operation and eliminates complicated menusAutomated setup creates reliable connections withminimal time and effortUp to 2,240 selectable frequenciesLithium Ion battery pack delivers up to 12 hours of operation (up to 8 hours of operation with AA batteries)56 MHz Bandwidth will allow for up to 90 channelsPreserves every detail of even the most dynamic performances with 134 dB transmitter dynamic range

The Sennheiser XSW 1-825 Dual bundles great sound and ease of use into a sleek handheld wireless system. The two included transmitters employ 825 cardioid capsules with a warm, smooth sound and excellent feedback rejection. Convenient features like one-button scanning and synchronization are housed in a streamlined receiver with built-in antennas. Intuitive icon-based indicators make operation a piece of cake. Use up to 10 systems simultaneously. The Sennheiser XSW 1-825 Dual is a great handheld wireless system for singers, presenters, and instrumentalists.

The Sennheiser XSW 1-835 Dual bundles great sound and ease of use into a sleek handheld wireless system. The two included transmitters employ 835 cardioid capsules with a warm, smooth sound and excellent feedback rejection. Convenient features like one-button scanning and synchronization are housed in a streamlined receiver with built-in antennas. Intuitive icon-based indicators make operation a piece of cake. Use up to 10 systems simultaneously. The Sennheiser XSW 1-825 Dual is a great handheld wireless system for singers, presenters, and instrumentalists.

Wireless Handheld Microphone System Cables are so passé. The Mackie EM Wave XLR wireless microphone system takes legendary Mackie sound quality wireless without the bulk of cables or traditional wireless setups. Just imagine all the time you’ll save vs. testing and detangling that milk crate of XLR cables you have.Wireless Without The HassleIf you’re like us, you never feel freer than when you’re doing your thing on stage or on video. Whether you’re live streaming or performing live, wireless mic systems provide you with unmatched mobility—plus they look great on camera. With one-touch pairing, remarkable battery life and a super-simple setup, the Mackie EM Wave XLR wireless handheld microphone system is the easy, affordable way to go wireless.Product featuresReady to go out of the box with both the transmitter and reciever includedUp to 7 hours of use on a single chargeFast, one button pairingInternal rechargeable batteryConnect your favorite handheld dynamic mic and you are good to go

The Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Navigate Today’s Congested RF Environment This feature-rich wireless system boasts a class-leading 60 MHz tuning range, giving you the power to operate unimpeded. Easily Accessible Backup Frequency The transmitter’s multifunction button can be used to switch to a preset backup frequency if interference is encountered. Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in several frequency bands: DE2 (470–530 MHz), EE1 (530–590 MHz), EF1 (590-650 MHz), FG1 (650-700 MHz), GH2 (794-806 MHz) and HH2 (821-832 and 863-865 MHz) Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Network-enabled system, featuring the ATW-R3210N receiver*, offers network monitoring and control via Wireless Manager software True Diversity operation reduces dropouts Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Frequency scan and IR sync functionality for ease of setup - Dual-mode receiver display can switch between standard view or a performance view that highlights key metering Transmitters and receivers include OLED screens for optimal readout of key settings and alerts Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries Antenna power available for powered antennas and other in-line RF devices Ground-lift switch helps eliminate audible hum caused by ground loops Balanced and unbalanced audio output jacks *Not available in all frequency bands, please check the configurable selection or contact your local Audio-Technica contact for further information.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with BP892xcH MicroSet omnidirectional condenser headworn microphone. Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with AT831cH cardioid condenser lavalier microphone.  

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with cH-style screw-down 4-pin connector. Select a microphone or cable with a cH-style screw-down 4-pin connector to complete the system. Available separately, the AT-cWcH Adapter Cable enables wireless microphones with a cW-style locking 4-pin connector to be used with body-pack transmitters that have a cH-style screw-down 4-pin connector.

5000 Series handheld microphone/transmitter body (handle only, capsule sold separately) with industry-standard thread mount for use with ATW-C510, ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 interchangeable wireless microphone capsules (or other compatible capsules). Includes AT8456a Quiet-Flex stand clamp. Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power Features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise

Audio-Technica’s third-generation 5000 Series wireless Body-Pack Transmitter Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. ATW-T5201 body-pack transmitter for use with the 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately. The transmitter features rugged, ergonomic metal body, highly visible OLED screen (switchable between standard and performance views to highlight key metering), programmable features, soft-touch controls, and switchable RF power (2 mW/10 mW/50 mW). Available in three different frequency ranges – DE1 (470–590 MHz), EG1 (580–700 MHz) and GH1 (700–820) – to provide complete coverage of the receiver’s bandwidth. The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two receivers are available for use with the 5000 Series: ATW-R5220 with two balanced XLR outputs and ATW-R5220DAN that also includes a Dante output. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820) for maximum versatility in an ever-congested RF environment Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality Highly visible OLED transmitter screen Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H) Robust, ergonomic full metal body with concealed soft-touch controls and IR sync functionality Programmable features and switchable 2/10/50 mW RF power Rugged cH-style connector provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Designed for professionals” The transmitter provides highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H), robust and ergonomic full metal body with concealed soft-touch controls, rugged cH-style connector for secure connection - just to name a few features that meet the needs of professional users. 4-pin connector The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables Wide Bandwidth Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820). Backup frequency Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Small Size Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H).

Audio-Technica’s third-generation 5000 Series wireless system Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. Audio-Technica’s third-generation, dual-receiver 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately and True Diversity operation. The receiver features a tuning bandwidth of 230 MHz (DG1): 470–700 MHz or a tuning bandwidth of 120 MHz (GH1): 700–820 MHz. You have the option of selecting a standard receiver (ATW-R5220) with two balanced XLR outputs or a receiver (ATW-R5220DAN) that also includes a Dante output. An antenna cascade output connects up to eight receivers, so a single pair of antennas can feed up to 16 channels of wireless. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two transmitters are available for use with the 5000 Series: ATW-T5201 body-pack transmitter and ATW-T5202 handheld transmitter. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Dual-channel receiver provides 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz) UHF tuning bandwidth for maximum versatility in an ever-congested RF environment Antenna cascade output allows 8 receivers to be connected so that a single pair of antennas can feed up to 16 channels of wireless. These connectors also provide a simple RF cable check feature to aid in RF troubleshooting Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality The full-rack receiver chassis holds two independent receivers, and offers antenna power, frequency scan and IR sync functionality, a ground-lift switch, and a front-panel headphone jack Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN) Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Cascade output saves using an antenna distributor” The two antenna cascade outputs on the back of the unit can connect up to eight receivers, allowing a single pair of antennas to power up to 16 wireless channels. Wide Bandwidth Dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz). IR-Sync IR-Sync functionality for a quick transfer of settings between transmitter and receiver. Dante Optional Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN). OLED screens Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering

ATW-1102 System 10 Wireless Handheld Microphone System ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.

The world’s smallest and first truly wireless microphone has been reborn. The Wireless GO II is an ultra-compact and extremely versatile wireless microphone system consisting of a dual channel receiver and two transmitters. The transmitters act as a clip-on microphone, featuring a high-quality in-built microphone for completely wireless operation, or they can be used as a beltpack with an external lavalier, delivering crystal-clear audio for any content creation application. The Wireless GO II boasts a range of powerful features, including universal compatibility with cameras, mobile devices and computers, extended range (200m line of sight) and improved transmission stability, on-board recording capabilities, and much more. This is next generation wireless audio.

The Wireless GO II Single is an extremely versatile and ultra-compact wireless microphone system consisting of a dual receiver and single transmitter. Features a high-quality microphone built into the transmitter for completely wireless operation, flexible output for connecting to cameras, computers and smartphones, extended transmission range, over 40 hours of on-board recording and much more, Wireless GO II Single is the perfect microphone for a wide range of content creation applications.

ATW-1101 System 10 Wireless Body-Pack System. ATW-R1100 receiver and ATW-T1001 body-pack transmitter. Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.

AT-One Handheld Transmitter System ATW-13 AT-One Handheld Transmitter System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility, Rack mountable for easy installation and Intuitive receiver and transmitter controls. ATw-13 the At-One Entry Level Uhf System, The Best Equipped On The Market AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion. AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group. Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-13 handheld system features the ATW-T3 cardioid condenser handheld transmitter, again with 10mW RF output and 10 hour battery life. Designed for quick and easy use Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap Users can choose up to 4 channels in a group The ATW-13 system is equipped with a cardioid condenser handheld transmitter RF transmission power 10mW Up to 10 hours' battery life with 2 x 1.5V AA batteries RF Indicator light Robust construction from high quality components Delivered in a transport case with a rack mount kit and detachable antennas “2 X 4 Channels” AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group. “rf light indicator” The display on the half-rack receiver clearly indicates both the RF and AF levels. “12v power” The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component. Delivered in a case The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case. Easy to use The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational. Cardioid condenser mic The ATW-T3 cardioid condenser handheld microphone is included. This microphone prevents interference when used in places equipped with induction loops. Removable antennae The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

At-One Beltpack System ATW-11 AT-One Beltpack System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility Rack mountable for easy installation and Intuitive receiver and transmitter controls. Atw-11 The At-One Entry Level Uhf System, The Best Equipped On The Market AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion. AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group. Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11 comes equipped with a sturdy, discreetly designed beltpack, providing 10mW RF output power, damping switch and a battery life of 10 hours. Designed for quick and easy use Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap Users can choose up to 4 channels in a group The ATW-11 system is equipped with a discreet and robust pocket transmitter RF transmission power 10mW The bodypack transmitter has a 4-pin HRS connector, which is able to connect to all Audio-Technica wireless microphones Up to 10 hours' battery life with 2 x 1.5V AA batteries RF Indicator light Robust construction from high quality components Delivered in a transport case with a rack mount kit and detachable antennas “2 X 4 Channels” AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group. “rf light indicator” The display on the half-rack receiver clearly indicates both the RF and AF levels. “12v power” The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component. Delivered in a case The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case. Easy to use The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational. Hrs connector The ATW-T1 bodypack transmitter (included) is equipped with a 4-pin HRS connector, so you can plug in any Audio-Technica wireless microphone, as and when required. Removable antennae The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

Handheld transmitter equipped with e825 cardioid dynamic capsule & mute switch. Handheld transmitter equipped with e825 cardioid dynamic capsule & mute switch 614–638 MHz. Compatible with the XSW-1 and XSW-2 series receivers.

XS Wireless 1 DUAL is a 2-channel wireless system for singers and presenters. Designed with ease of use in mind, these analog UHF systems feature a sleek dual-channel receiver with built-in antennas and the streamlined interface from Sennheiser's popular XS Wireless 1 series.

Use the new UHF B210 DSP bodypacks to reproduce the musicality of your instruments and turn wireless into wired!We've added a new, high performing Digital Signal Processor (DSP) to manage the frequencies in all our wireless systems.DSP technology gives greater wireless stability and precision, practically matching the type of sound quality you would expect from a wired system. Relish the uncompromising sound balance when you sing or play in wireless. Connect your Series 21 mic to the UHF B210 DSP Solo bodypack:SB21 Sax & BrassVL21 Violin & AltoGL21 Guitar & UkuleleBL21 ContrabassCL21 CelloOPTION: can be connected to the B210 DSP bodypackLavalier P2L lapel mic: a small diaphragm condenser Lavalier mic which respects the timbre of your voice and is just as effective at conferences as it is during presentations.Headset : the new Prodipe headset mic is specially designed for people on the move. It adapts perfectly to your morphology. Comfortable and light, it boasts a tailor made cardioid cartridge for singing and vocals. Specifications:System - principal fonctions:Transmission type: UHFBandwith:  630 - 680MHzFrequencies: 2 x 100Dynamic: >90dBHarmonic distorsion: 96dBUnbalanced audio output: 1 x Jack 6.35 mmBalanced audio output: 1 x XLR

Wireless System Bass/Guitar. This UHF system has been designed for electric guitars, electro acoustic guitars and bass guitars.The specially adapted impedance means that you can reproduce the high definition sound of a wired system in UHF.The electronics for the UHF side prevent any interference, and that signal integrity would be optimized no matter what the conditions.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality.PLL with 100 preset frequenciesFrequency range: 600MHz to 635MHzActive cable (for the UHF Lanen GB21) can be connected to the 6.35mm Jack on your guitar/bass100 channel receiver: 6.35 mm output Jack + XLR​Whatever wireless system you're using, the most important aspects are the audio quality and the stability. We've the UHF GB21 GUITAR/BASS system in metal to give you perfect insulation, and adapted the impedance for electric, electro-acoustic, and bass guitars. All this to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound.Χαρακτηριστικά:System:Receiving mode: UHF True DiversityNumber of channels: 100 PLL selectable frequenciesFrequency range: 600MHz at 635MHzS/N Ratio: >85dBTotal harmonic distorsion: 80dBWeight: 800gDimensions (W x D x H): 210mm x 160mm x 53 mmBodypack:Connections: MiniXLR with Jack 6.35mm active cableMax output power: 8mWMax SPL: 130dBBattery (non supply) : alkaline battery (AA) or rechargeable battery NiMH ty 

Prodipe launches for the instrumentists, a new professional wireless system to connect to Series 21 mics. This pack includes GL21 Acoustic guitar & Ukulele mic with PRODIPE UHF Series 21 Lanen wireless mic.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality. Whatever wireless system you're using, the most important aspects are the audio quality and the stability.The UHF Series 21 system in metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound."Specifications:System:Receiving mode: UHF True DiversityNumber of channels: 100 PLL selectable frequenciesFrequency range: 640MHz - 675MHzS/N Ratio: >85dBTotal harmonic distorsion: 80dBWeight: 800gDimensions (W x D x H): 210mm x 160mm x 53 mmBodypack:Connections: MiniXLR with Jack 6.35mm active cableMax output power: 8mWMax SPL: 130dBBattery (non supply) : alkaline battery (AA) or rechargeable battery NiMH typeConnections: MiniXLR compatible with PRODIPE Series 21 mics:GL21 Acoustic Guitar & Ukulele,SB21 Sax & Brass,VL21 Violin & AltosAnd alsoCL21 Cello,BL21 Contrabass,PL21 Percussion.And also... 

Wireless System for Série 21 Instruments Microphones. Compatible with Série 21 intrument mics GL21 Acoustic Guitar & Ukulele, SB21 Sax & Brass, VL21 Violin & Altos and also CL21 Cello, BL21 Contrabass, PL21 Percussion.he specially adapted impedance means that you can reproduce the high definition sound of a wired system in UHF. We also made sure that the electronics for the UHF side would prevent any interference, and that signal integrity would be optimized no matter what the conditions. Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality.UHF Series 21 Lanen PLL with 100 preset frequenciesFrequency range: 640MHz - 675MHzCompatible with Série 21 intrument mics GL21 Acoustic Guitar & Ukulele, SB21 Sax & Brass, VL21 Violin & Altos and also CL21 Cello, BL21 Contrabass, PL21 Percussion100 channel receiver: 6.35 mm output Jack + XLRWhat about this system?"Whatever wireless system you're using, the most important aspects are the audio quality and the stability.We've made the UHF Series 21 system in metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound."Ludovic Lanen - Sound Engineer

Express yourselves on stage with the pack "Instrument mic VL21 Violin & Altos + wireless system UHF Series 21 Prodipe. Prodipe launches for the instrumentists, a new professional wireless system to connect to Series 21 mics. This pack includes VL21 Violin & Alto mic with PRODIPE UHF Series 21 Lanen wireless mic.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality. Whatever wireless system you're using, the most important aspects are the audio quality and the stability. The UHF Series 21 system in metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times.Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound.Specifications:System:Receiving mode: UHF True DiversityNumber of channels: 100 PLL selectable frequenciesFrequency range: 640MHz - 675MHzS/N Ratio: >85dBTotal harmonic distorsion: 80dBWeight: 800gDimensions (W x D x H): 210mm x 160mm x 53 mmBodypack:Connections: MiniXLR with Jack 6.35mm active cableMax output power: 8mWMax SPL: 130dBBattery (non supply) : alkaline battery (AA) or rechargeable battery NiMH typeConnections: MiniXLR compatible with PRODIPE Series 21 mics:GL21 Acoustic Guitar & Ukulele,SB21 Sax & Brass,VL21 Violin & AltosAnd alsoCL21 Cello,BL21 Contrabass,PL21 Percussion.

Prodipe launches for the instrumentists, a new professional wireless system to connect to Series 21 mics.This pack includes SB21 Sax & Brass mic with PRODIPE UHF Series 21 Lanen wireless mic. Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality.Whatever wireless system you're using, the most important aspects are the audio quality and the stability.The UHF Series 21 system is made of metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times."Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound."Ludovic Lanen - Sound EngineerSystem:Receiving mode: UHF True DiversityNumber of channels: 100 PLL selectable frequenciesFrequency range: 640MHz - 675MHzS/N Ratio: >85dBTotal harmonic distorsion: 80dBWeight: 800gDimensions (W x D x H): 210mm x 160mm x 53 mmBodypack:Connections: MiniXLR with Jack 6.35mm active cableMax output power: 8mWMax SPL: 130dBBattery (non supply) : alkaline battery (AA) or rechargeable battery NiMH typeConnections: MiniXLR compatible with PRODIPE Series 21 mics:GL21 Acoustic Guitar & Ukulele,SB21 Sax & Brass,VL21 Violin & Altos 

Raise your voice. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions. The XS WIRELESS 2 VOCAL SET is an easy to use all-in-one wireless system for singers and presenters featuring Sennheiser’s renowned evolution microphone capsule e865 (condenser, super-cardioid) to capture every detail. True Diversity receiver in a metal housing and rackmount kit included.

Hands-free performance. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions.The XS WIRELESS 2 HEADMIC SET is an easy to use all-in-one wireless system for singers and performers, excellent for live sound that involves dancing and singing all at the same time. Metal receiver housing and rackmount kit included.Features:Lightweight headmic for hands-free operation and compact bodypack transmitterTrue diversity receiver with metal housingExternal antennasAutomatic frequency management and synchronization via remote channel for easy setupFully tunable over a wide range of UHF frequenciesRackmount kit includedUp to 12 compatible channelsWhat's in the box?1 receiver EM-XSW 21 bodypack transmitter SK-XSW1 headset microphone ME 3-II1 power supply NT 12-5 CW2 AA batteries1 rackmount kit1 pouchuser manual

The R300-HD is a robust handheld UHF wireless system, suitable for any application where the convenience of a handheld transmitter is required. The HT-300 metal handheld transmitter is made to withstand the rigors of daily use while remaining comfortable and light-weight in your hand. The PL22 dynamic microphone is the perfect all-around microphone for singing, speaking engagements, and emcees. The cardioid pickup pattern rejects sounds from the surroundings, helps control audio feedback, and still allows an experienced vocalist to work the microphone. The receiver's dual antenna diversity helps avoid signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware.Features:ClearScan automatically finds the clearest channelEZsync one-step channel setupPL22 cardioid dynamic microphone element14 hour battery life from two AA alkalineRugged metal transmitterMetal receiver chassis with optional rack mountSpecifications:Antennas: Flexible TNC 1/2 WaveAudio Frequency Response: 80 Hz - 18kHz +/- 2dBBattery Life: 14 hours with (2) AA alkalines typicalCase Material: MetalConnector Type: 1/4 inch unbalanced, 3-pin XLR balancedControls: on/off, Set, Up, Down, SyncDistortion (@ 1 kHz, 40 kHz deviation): less than 1.0, 0.4 typical%Diversity: True AntennaDynamic Range: greater than 95dBElement: PL22 Cardioid DynamicNumber of Channels: 32Operating Temperature Range: 5º - 45º C (41º - 113º F)Polar Pattern: CardioidPower Requirement: 12-16 VDC, 500 mA maxReceiver Type: Synthesized PLLRF Frequency Range: 16MHzRF Output: 8 mW typicalRF Sensitivity (12 dB SINAD): less than 1.0uVSignal-to-Noise Ratio (A-weighted): greater than 100dBSquelch: Tone code plus Amplitude 

The R300-L is a robust UHF wireless bodypack system, suitable for any application where the convenience of a wireless lavalier microphone is required. The system's BP-300 rugged metal bodypack transmitter is simple to use, and is powered by two AA batteries. Included with the system, the ULM18 is a high quality directional (cardioid) condenser lavalier microphone suitable for sound reinforcement or recording of voice, and allows users the convenience of a hands-free presentation or performance experienceExceptionally useful for sound reinforcement applications, the ULM18’s directional cardioid polar pattern reduces sound system feedback potential when used properly. The receiver's dual antenna diversity helps avoid signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware.Features ClearScan automatically finds the clearest channelEZsync one-step channel setupULM18 directional lavalier microphone14 hour battery life from two AA alkalineRugged metal transmitterMetal receiver chassis with optional rack mountSpecifications:Antennas: Flexible TNC 1/2 WaveAudio Frequency Response: 80 Hz - 18kHz +/- 2dBBalanced Line Level Output (RMS Adjustable): 10 - 100mVBattery Life: 14 Hours with (2) AA alkalines typicalCase Material: MetalConnector Type: 1/4 inch unbalanced, 3-Pin XLR balancedControls: On/Off, Set, Up, Down, SyncDistortion (@ 1 kHz, 40 kHz deviation): less than 1.0, 0.4 typical%Diversity: True AntennaDynamic Range: greater than 95 dBdBElement: ULM18 Directional MicrophoneNumber of Channels: 32 Per Band, 8 SimultaneousOperating Temperature Range: 5º - 45º C (41º - 113º F)Polar Pattern: CardioidPower Requirement: 12-16 VDC, 500 mA maxPower Supply: 12 VDC, 500 mA maxReceiver Type: Synthesized PLLRF Frequency Range: 16MHzRF Output: 8 mW TypicalRF Sensitivity (12 dB SINAD): less than 1.0uVSignal-to-Noise Ratio (A-weighted): greater than 100 dBdB 

The R300-E is a robust UHF wireless bodypack system, suitable for any application where the convenience of a wireless headworn microphone is required. The system's BP-300 rugged metal bodypack transmitter is simple to use, and is powered by two AA batteries. The system's light-weight, double-ear hook HM3 headworn microphone is comfortable for extended daily use, and provides the user the convenience of hands-free presentations or performances. The receiver's dual antenna diversity helps avoid signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware.Features ClearScan automatically finds the clearest channelEZsync one-step channel setupHM3 omni-directional microphone14 hour battery life from two AA alkalineRugged metal transmitterMetal receiver chassis with optional rack mountSpecifications:Antennas: Flexible TNC 1/2 WaveAudio Frequency Response: 80 Hz - 18kHz +/-2dBBalanced Line Level Output (RMS Adjustable): 10 - 100 mVBattery Life: 14 hours with (2) AA alkaline typicalCase Material: metalConnector Type: 1/4 inch unbalanced, 3-pin XLR balancedControls: on/off, Set, Up, Down, SyncDistortion (@ 1 kHz, 40 kHz deviation): Less than 1.0, 0.4 typical%Diversity: True AntennaDynamic Range: greater than 95dBElement: HM-3 Omni-directional headwornFamily: R300Number of Channels: 32 per band, 8 SimultaneousOperating Temperature Range: 5º - 45º C (41º - 113º F)Polar Pattern: OmnidirectionalPower Requirement: 12-16 VDC, 500 mA maxPower Supply: 12 VDC, 500mA maxReceiver Type: Synthesized PLLRF Frequency Range: 16MHzRF Output: 8 mW typicalRF Sensitivity (12 dB SINAD): less than 1.0uVSignal-to-Noise Ratio (A-weighted): greater than 100dBSquelch: Tone code plus Amplitude 

With transparent 24-bit digital audio quality and incredibly efficient RF spectrum usage, the QLXD4 Digital Wireless Receiver combines professional features with streamlined setup and operation. Automatic scanning quickly finds open frequencies, and one-touch IR sync quickly deploys them to transmitters. Ethernet networking enables networked channel scanning across multiple receivers and Wireless Workbench® software integration for remote control of receiver settings from a PC or Mac. Remote monitoring and control from iOS devices also is available via the ShurePlus™ Channels Mobile App.Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.Specifications:Frequency band S50: 823-832 MHz and 863-865 MHz24 Bit / 48 kHz audio signal22 Compatible channels in an 8 MHz TV bandSwitchable transmitter power 1/10 mW120 dB dynamic rangeMetal handheld transmitter with dynamic SM58 microphone capsuleDirectional characteristic: Cardioid9.5" Metal receiverDetachable BNC antennasEthernet connection for monitoring and configuration of the systemFrequency transmission via infrared interfaceXLR / jack outputTransmitter operates with 1.5 thomann V AA batteries - also available with SB 900 lithium ion batteryPS23 power supply and rackmount inclluded​​

This system is available as QLXD24/KSM9. It contains a QLXD2 handheld transmitter with KSM9 microphone head and a QLXD4 receiver. Digital wireless receiver combines professional features with streamlined set-up and operation. Handheld wireless transmitter compatible with QLX-D™ Digital Wireless Systems.Specifications:Metal handheld transmitter with KSM9 condenser microphone capsulePolar pattern: cardioid/ supercardioid (switchable)120 dB Dynamic rangeAudio signal: 24 bit/ 48 kHzAES-256 thomann Encryption for secure transmissionUp to 72 MHz switching bandwidth22 Compatible systems per 8 MHz TV channelSwitchable transmitter power 1/10 mW9.5" Metal receiverDetachable BNC antennaEthernet connector for monitoring and configuration of the systemFrequency transmission via infrared interfaceXLR/ jack outputTransmitter powered by 1.5 V AA batteries, Frequency band S50: 823 - 832 MHz and 863 - 865 MHzIncl. PS23 power adaptor and rack mount​​

The BLX24/PG58 Handheld Wireless System is part of the BLX wireless systems family. Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box.Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. Includes BLX4 single-channel receiver, BLX2/PG58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.Specifications:System: Analog/Digital: AnalogSystem: Frequency Range: 542 - 572 MHzSystem: Operating Range: 300 ft. Line-of-sightSystem: Frequency Response: 50Hz-20kHzSystem: Microphone Included: YesSystem: Channel Selection: AutoMicrophone: Type: DynamicMicrophone: Polar Pattern: CardioidMicrophone: Size: 8.87" x 2.12"Microphone: Frequency Response: 50Hz-17kHzTransmitter: Form Factor: Handheld with Mic CapsuleTransmitter: Mute Feature: YesTransmitter: Battery Type: 2 x AATransmitter: Battery Life: Up to 14 hoursTransmitter: Weight: .48 lbs.Receiver: Type: Table TopReceiver: Front Panel Display: YesReceiver: Displays: LCD

The BLX14R Bodypack Wireless System is part of the BLX wireless systems family.Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.Includes BLX1 bodypack transmitter, BLX4R rack mount receiver, guitar cable, single and dual rackmount kit, two 1/4 wave antennas, zipper bag, power supply, 2 AA batteries, and user guide.Components:WA302 Cable, Instrument, 2.5 foot (.75 m), 4 Pin Mini Connector (TA4F) to 1/4-inch Connector.BLX1-Bodypack Transmitter. Up to 14 hours of continuous use with 2 AA batteries. 300 ft (100 m) transmission radius.BLX4R-Rack Mount Receiver. Rack-mountable receiver with removable antennas for quick distribution.

Raise your voice. Go for XS wireless 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band. The XS wireless 1 Vocal Set is an easy to use all-in-one wireless system for singers and presenters, excellent for live sound featuring Sennheiser’s renowned evolution microphone capsules, e825 (dynamic, cardioid) or e835 (superior dynamic, cardioid) to get started. The set includes an intuitive stationary receiver for quick setup and hassle-free handling, as well as a vocal microphone and microphone clamp.

The CMX726 is an headset condenser microphone with an omnidirectional pickup pattern, designed for a wide variation of vocal and speech applications. The back-electret condenser capsule with flat frequency response guarantees a pristine audio quality true to the speakers voice and intonation. The high SPL capabilities guarantee a true reporoduction without distortion even while exposed to hard and vigurous sounds. The construction is lightweight and ergonomically designed, guaranteeing a comfortable fit with minimum visual impact. The dual-ear construction allows it for being used for even the most energetic performances. A drop stopper on the microphone boom avoids humidity to reach the microphone cell, while bending and position adjustment allows optimal positioning. A connector splits the cable from the microphone, allowing quick exchange which is valuable for both service use or when used in combination with different types of transmitters. The microphone comes with 4 types of connectors included, making it suitable for use with different major systems manufacturers. Additional connector types are optionally available.Available in dark (black) and light skin colour and comes with windscreen and cable clip for anchoring to clothing included. Features:Pristine audio qualityMinimum visual impactFlat frequency responseOmni-directional pick-up patternComfortable lightweight design with adjustabe boomDual ear design for use in active situationsAdapts to various wireless systemsReplaceable / serviceable cable & connectors4 Connector types includedSpecifications:Microphone type: Back electret condenserFrequency Response: 20 Hz – 20 kHzPolar pattern: Omni-directionalSensitivity: 42 dB ± 3 dBImpedance: 2 k Ω ± 30%Max. SPL: 135 dBSupply range: 1.5 ~ 9 V DCConnection cable: 1.2 meter

Featuring the premium WA305 instrument cable and QLXD1 wireless bodypack transmitter, QLXD14 combines professional features with simplified setup and operation.Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.QLXD1 Wireless Bodypack Transmitter quickly syncs with a wireless receiver over IR at the push of a button and maintains a clear, uninterrupted signal over its entire range. Specifications:64 MHz tuning bandwidth (region dependent)More than 60 preset compatible channels per frequency band (region dependent)Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channelDigital predictive switching diversity ensures solid RF connectionAES 256-bit encryption for secure wireless transmissionUp to 60 dB of adjustable audio gainHigh-contrast LCD menu and controls with lockout featureAudio and RF LED meters with peak indicatorDetachable ½ wave antennasMic / line switchable XLR output¼" Instrument outputDurable aluminum construction with brushed finishOver 120 dB of dynamic range: no transmitter gain adjustments neededAES 256-bit encryption for secure transmissionOptional Shure SB900 lithium ion rechargeable battery reports remaining runtime in hours and minutesExternal charging contacts for docked chargingBacklit LCD with easy to navigate menu and controlsSelectable display mode showing group/channel, frequency, or battery runtime4-Pin male mini connector (TA4M)Rugged metal constructionDetachable ¼ wave antennaFrequency and power lockout

Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.With an interchangeable BETA58A® microphone cartridge, the QLXD2/BETA58A Handheld Wireless Microphone Transmitter is ideal for wireless vocals in presentation spaces, music venues, and houses of worship.Specifications:64 MHz tuning bandwidth (region dependent)More than 60 preset compatible channels per frequency band (region dependent)Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channelDigital predictive switching diversity ensures solid RF connectionAES 256-bit encryption for secure wireless transmissionUp to 60 dB of adjustable audio gainHigh-contrast LCD menu and controls with lockout featureAudio and RF LED meters with peak indicatorDetachable ½ wave antennasMic / line switchable XLR output¼" Instrument outputDurable aluminum construction with brushed finish24-Bit digital audio qualityIncredibly efficient RF spectrum usageQuick syncing with a wireless receiver over IR at the push of a buttonClear, uninterrupted signal over the entire operating range AES 256-bit encryption for secure transmissionOver 120 dB of dynamic range: no transmitter gain adjustment needed1, 10 mW selectable RF output powerOptional Shure SB900 lithium ion rechargeable battery reports remaining runtime in hours and minutesExternal charging contacts for docked chargingBacklit LCD with easy to navigate menu and controlsSelectable display mode showing group/channel, frequency, or battery runtimeRugged metal constructionFrequency and power lockout

The Perception Wireless Instrumental Set comprises an SR 45 receiver and PT 45 bodypack transmitter, the smallest and lightest transmitter in its class. It can be used with many AKG miniature microphones, and the battery compartment cover doubles as a convenient tool for setting input gain for the application at hand.The system comes complete with a universal power supply with US/UK/EU adapter, MKG L cable with ¼" jack plug and mini XLR connector, and one AA size dry battery. In combination with the C 519 ML (sold separately) also suitable for wind instruments.The SR 45 Stationary Receiver delivers a diversity system, professional XLR and Jack outputs, and the SMPS solution. The audio level and squelch threshold are adjustable on the receiver. It is a stationary receiver for use with all transmitters of the Perception wireless system. The SR 45 operates within a switching bandwidth of up to 30 MHz in the 500 to 560 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.The PT 45 bodypack transmitter lets you use both dynamic microphones and condenser microphones operating on a supply voltage of approx. 4 V. Naturally you may also connect an electric guitar, electric bass or keytar. The PT 45 operates within a switching bandwidth of up to 30 MHz in the 500 to 560 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.Featues:30 MHz selection bandwidth (depending on local frequency plans)8 hours of operation with a single AA size batteryCompatible with all AKG MicroMicsLow battery indicatorSmallest and lightest bodypack transmitter in its classComplete with MKG L cable for direct connection to electric guitar or bassIncludedPT 45 bodypack transmitterAA batteryMKG L cableSR 45 receiverSMPS switched mode power supplyGuarantee cardFrequency tableManual supplement sheet

The WMS 40 Mini Vocal Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time. The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters. The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone.Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run. The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.

Shure BLX14/CVL T11, PG Presenter Series, UHF Wireless-System with BLX1 pocket transmitter and CVL lapel microphone,  3 Systems parallel, Pilottone, antenna-Diversity.Quick-Scan to find free frequencies, condenser CVL capsule, 50 - 20.000 Hz, cardioid, receiver with plastic housing, internal antennas, XLR- and Jack outputs, Audio Status-LEDs, frequencyrange 662 - 686 MHz.

The BLX14/SM31 Fitness Headset Wireless System from Shure includes a BLX4 single-channel wireless receiver, a BLX1 bodypack transmitter, and a SM31FH fitness headset mic. The system is set to Shure's H8 frequency band and operates between 518 - 542 MHz.The BXL1 bodypack transmitter has a 300' line of sight operation range with the BLX4 receiver. It is powered by two included AA batteries that can provide up to 14 hours of operation. The BLX4 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.Specifications:H8 Frequency BandBLX4 Single-Channel Wireless ReceiverBLX1 Bodypack TransmitterSM31FH Fitness Headset MicrophoneOne-Touch QuickScan Frequency SelectionInternal Antenna Diversity300' Operating RangeBatteries Included

The BLX14/CVL Lavalier Wireless System from Shure includes a BLX4 single-channel wireless receiver, a BLX1 bodypack transmitter, and a PGA31 headset mic. The system is set to Shure's H8 frequency band and operates between 518 - 542 MHz.The BXL1 bodypack transmitter has a 300' line of sight operation range with the BLX4 receiver. It is powered by two included AA batteries that can provide up to 14 hours of operation. The BLX4 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.Specifications:H8 Frequency BandBLX4 Single-Channel Wireless ReceiverBLX1 Bodypack TransmitterPGA31 Headset MicrophoneOne-Touch QuickScan Frequency SelectionInternal Antenna Diversity300' Operating RangeBatteries Included

WMS420 Presenter Set is a professional multi-channel wireless microphone system. It includes the HT420 analog high-performance wireless handheld transmitter features a dynamic microphone capsule for demanding vocal performances, the PT420 wireless bodypack transmitter, the SR420 wireless stationary receiver and a Clip-on microphone C417 L.The WMS420 Presenter Set package includes:1 x Bodypack transmitter PT4201 x Stationary receiver SR4201 x Clip-on microphone C417 L1 x Windscreen W4072 x Receiver antennas1 x AC adapter1 x AA size battery