GoldenEar

Invisa HTR 7000: 78cm W x 1.6cm D x 27cm H

Looking for a high performance affordable alternative to the “Contractor Quality” in-walls your builder might suggest? The Invisa 600 is based on our best-selling Invisa 650, with the same one-piece marble-infused unitized driver/frame/flange construction built around the same 6.5" driver. It also offers the same minimal footprint, which delivers the exceptional performance advantages of a 6.5" driver based system, in a compact size comparable to the size of most competitors' 5.25" systems. Of course, it also features a paintable MagneLock grille with an optional square grille available.Instead of our signature HVFR tweeter, the 600 incorporates a 1" pure titanium dome tweeter, which has a special silk surround. It is pivotable, of course. Its performance, while not quite that of our folded ribbon, is excellent and we believe the best of any dome tweeter available in in-wall, in-ceiling architectural products. Of course, a complex crossover is utilized to ensure seamless blending and voicing is signature GoldenEar all the way.

The GoldenEar Invisa HTR (Home Theater Reference) 8000 is a no-holds-barred ceiling-mounted L/C/R speaker that shares essential DNA with our critically acclaimed Triton Reference Towers. Equally suited to sophisticated home theaters and audiophile music systems, the HTR 8000 is the perfect choice for side- or rear-surround speakers in 5.1-channel or 7.1-channel systems and makes an ideal height-channel speaker for Dolby Atmos/DTS:X systems. The HTR 8000’s thoughtful design features a magnetically attached micro-perforated grille that covers all mounting hardware, allowing the speaker to seamlessly blend into most any environment. GoldenEar’s FocusField™ Technology uses drivers mounted at precisely calculated angles to create palpable, well-focused images across an expansive soundstage.The overall result is a large, open presentation with precise three-dimensional imaging that doesn’t just come from the ceiling but convincingly fills the entire room with realistic sound. For superior frequency response and remarkable clarity, the HTR 8000 combines GoldenEar’s Reference High-Velocity Folded Ribbon (HVFRTM) tweeter with an 8" high-definition, cast-basket bass/midrange driver. In addition, it employs a highly refined crossover network with a high-frequency equalization switch, assuring well-balanced sound in virtually any room.

Invisa Signature Point Source (SPS) speakers oer excellent performance when used as front left, right, or center-channel loudspeakers, as well as side- or rear-surrounds in high-quality multi-channel home theater and music systems. Invisa SPS speakers also oer superb quality in simpler two-channel systems. Each Invisa SPS incorporates four 5-1/4" high-denition cast-basket drivers and a High-Gauss Reference High Velocity Folded Ribbon Tweeter, similar to the units found in the award-winning Triton towers. The sophisticated crossover network uses the same fully balanced topology as in our upper range models, with a polystyrene lm capacitor in the high-frequency section. In order to achieve a point source radiation pattern with the dramatic benets of better dispersion and improved imaging, the four 5-1/4" drivers are neither identical nor do they cover the same frequency range. Other important details include: a switch to allow adjustment of the tweeter level, a magnetically attached low-prole grille, nonresonant mineral-lled frame structure, special dog-screws to allow easy and secure attachment to the wall, and a rotatable tweeter to allow for correct orientation of the tweeter for vertical or horizontal positioning. Also available is a unique optional backbox that has been engineered to prevent sound from bleeding through into the adjacent room.

The Invisa MPX MultiPolar™ In-Wall/In-Ceiling Loudspeaker, with its dual 4.5" bass/midrange drivers, combines the advantages of a direct-radiating loudspeaker with enhanced spaciousness and dispersion. This makes them the perfect choice for the rear or side surround channels of a multi-channel installation, as well as for front main speakers or for distributed audio multi-room installations.It can be easily mounted in walls or ceilings and is very flexible in terms of orientation. Like the other Invisa Series speakers, it has a flat magnetically attached micro-perf grille that covers the flange for an attractive, nearly invisible look. It combines two precisely angled spiderleg cast-basket 4.5" bass/midrange drivers, a High-Velocity Folded Ribbon Tweeter (HVFR™) and a complex precision crossover network with a high-frequency equalization switch.Like the Invisa HTR 7000, it features GoldenEar’s unique Non-Periodic Diffraction Control and Wave-Launch technology for enhanced clarity and source-less sound radiation into the room.

The Triton Seven brings Speaker-of-the-Year Award winning Triton Series performance into a more compact size and even more affordable price range. Although it is the first Triton Tower without a built-in powered subwoofer, it still achieves superbly deep, subwoofer-like impactful bass performance by combining advanced drivers with our highly evolved and sophisticated bass-loading technologies. Mike Mettler of Sound&Vision called the Triton Seven a “real reference speaker for $1400 a pair...they’ll likely become your next reference speakers, just as they've become mine”.Like the Five, the Seven’s strikingly attractive and acoustically purposeful cabinet provides the same performance benefits, as well as looking great. The Seven’s precise and totally boxless imaging characteristics are further enhanced by the narrow front baffle. A complex Linkwitz/Riley crossover perfectly blends the D'Appolito Arrayed twin 5-1/4" cast basket bass/midrange drivers specifically designed for exceptionally long-throw, for tremendous dynamic range and extraordinarily deep bass response. These surround the same signature High Velocity Folded Ribbon (HVFR™) tweeter for high-resolution reproduction of both music and cinema. And dual side-mounted inertially-balanced, planar sub-bass radiators deliver impactful, superbly detailed, subwoofer-quality bass performance. The Triton Seven’s high-resolution sonic performance makes it perfect for the highest quality two channel systems as well as the best multi-channel music and home theater systems. Features:Frequency Response 29 Hz - 35 kHzEfficiency 89 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ High-Definition Cast-BasketMid/Bass Drivers, coupled to:Two - 8˝ Planar Sub-Bass RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 10 - 300 watt/channelDimensions(height is with base installed, no spikes): 5-3/4˝ W (front) x 7-1/4˝ W (rear) x 11˝ D x 39-3/4˝ HBase: 10-1/2˝ W x 14-1/2˝ DWeight :  32 lbs (product) / 42 lbs (shipping) 

The Triton Five is a larger version of the Award Winning Triton Seven, with greater dynamic range and even deeper bass extension, plus important refinements carried over from the Triton One development program. As with all of our Triton Towers, the Triton Five’s high-resolution sonic performance makes it ideal for use in two channel systems of the highest quality, as well as complete multi-channel surround music and home theater systems. “They absolutely rock the speaker world’s foundation to the core … delivering the kind of musical bliss some pay upwards of $10,000 for”, raves Caleb Denison of Digital Trends.The Five’s unique cabinet shape is both acoustically purposeful as well as strikingly attractive. Its narrow front baffle and stylish rearward rake, in conjunction with the complex crossover, both aligns the driver array precisely for a coherent wave-launch directed at ear level at the listening position, as well as results in non-parallel front and rear baffles for better control of internal standing waves. And, the non-parallel side cabinet walls and slanted top provide the same acoustical performance benefit.A D’Appolito array of two newly developed 6" long-throw midrange/bass drivers surround the same High Velocity Folded Ribbon Tweeter (HVFR™) used in all the Triton Towers. The Five incorporates FOUR side-mounted, opposing, inertially-balanced planar sub-bass radiators, located on either side of the cabinet down near the floor for optimum coupling to the room. And the Fives will deliver exceptional performance with moderately priced receivers, while also allowing you to appreciate the subtle qualities of the world’s finest audio components. Features:Frequency Response: 26 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 6˝ High-Definition Cast-BasketMid/Bass Drivers, coupled to:Four - 8˝ Planar Sub-Bass RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 15 - 400 watt/channelDimensions (height is with base installed, no spikes) 6-5/8˝ W (front) x 8-1/8˝ W (rear) x 12-3/8˝ D x 44-1/4˝ HBase: 11˝ W x 16-1/2˝ D​

The Triton Three+ incorporates the same advanced technologies and delivers state-of-the-art performance remarkably similar to its bigger brothers. The Triton Three+ is literally a smaller version of the award-winning Triton One and Triton Two+. It is the perfect solution for listeners looking for a more compact loudspeaker that offers equally superb performance for both high-quality two-channel systems as well as in multi-channel home theater and music systems.Like the Triton Two+, the newly updated Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4" x 8" quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling.There is one of the same 4.5" high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame. Features:Frequency Response: 21 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement:One - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Driver, coupled to:Two - 6-3/4˝ x 8˝ Quadratic Planar Infrasonic RadiatorsOne - 4-1/2˝ High-Definition  Cast-Basket MVPP™ Upper-Bass/Mid DriverOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 400 watt/channelBuilt-In SubwooferPower Amplification: 800 watt ForceField AmplifierDimensions: 5-1/4˝ W (front) x 7˝ W (rear)  x 13˝ D x 44˝ H (height is with base installed, no spikes)Base: 11-1/2˝ W x 16-1/4˝ D

GoldenEar’s Triton Two Tower clearly set the audio world on its proverbial ear with extraordinary sound quality, elegant styling and previously unimaginable value. It has earned an incredible series of rave reviews and industry accolades from around the world — including more than a few Speaker of the Year and Audio Product of the Year honors and awards. "Listening with them paralleled previous encounters with no-holds-barred speakers - ones priced upwards of $50,000.", raved Al Griffin of Sound & Vision.The sleek, 48" tall Triton Two+ is newly updated to now incorporate many of the new technologies and refinements developed for the Triton One, including: a fully balanced crossover design, high-end film capacitors, redesigned midrange/upper-bass drivers, and a reprogrammed DSP. Its built-in subwoofer section is powered by a 1200 watt GoldenEar ForceField digital amplifier driving two 5" x 9" front-mounted quadratic subwoofer bass drivers coupled to dual opposing side-mounted, inertially-balanced, 7" x 10" quadratic planar infrasonic bass radiators. The two 4-1/2" spider-leg cast-basket midrange/upper bass drivers, which incorporate GoldenEar’s proprietary Multi-Vaned Phase Plug (MVPP™) design, are housed in dual discreet chambers arranged in a D’Appolito array surrounding GoldenEar’s extraordinary High-Velocity Folded Ribbon (HVFR™) tweeter design. The Triton Two's dynamic, effortless, you-are-there clarity will almost literally put the live performance or action right into your home, or conversely, put you into the concert hall or the live action on the screen.  Features:Frequency Response: 16 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement:Two - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Drivers, coupled to:Two - 7˝ x 10˝ Quadratic Planar Infrasonic RadiatorsTwo - 4-1/2" High-Definition Cast-Basket MVPP™ Upper-Bass/Mid DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 500 watt/channelBuilt-In SubwooferPower Amplification: 1200 watt ForceField AmplifierDimensions: 5-1/4˝ W (front) x 7-1/2˝ W (rear) x 15˝ D x 48˝ H (height is with base installed, no spikes)Base: 11-1/2˝ W x 18˝ D

The Triton One is an evolutionary speaker that builds upon all the advanced technologies that have made the Tritons famous. (In response to questions, there is no Triton One+ coming. The "+" in the new Triton Three+ and Two+ is technology already in the One.) The sleek 54" tall Triton One's upgraded technology includes a 56 bit DSP engine for the sub section, a fully balanced crossover design, high-end film capacitors, advanced cabinet design, and much more. The Triton One includes a built-in subwoofer section powered by a 1600 watt GoldenEar ForceField digital amplifier.The amp drives three 5" x 9" front-mounted quadratic subwoofer bass drivers which are coupled to dual (per side) side-mounted 7" x 10" quadratic planar infrasonic bass radiators. Our newly developed Frequency Dependent Bass Loading Technology, utilizing open-cell polyurethane foam damping pads, as well as special hollow-fiberfill, further optimizes low-frequency performance.There are two newly designed 5-1/4" cast-basket midrange/upper bass drivers, which incorporate GoldenEar’s proprietary Multi-Vaned Phase Plug (MVPP™) design, housed in dual discreet midrange chambers, arranged in a D’Appolito array surrounding the extraordinary GoldenEar High-Velocity Folded Ribbon (HVFR™) tweeter.The result is a superb, Loudspeaker-of-the-Year award winning reference home audio and home theater loudspeaker that has performance equal to, and in many cases surpassing, speakers selling for ten times its cost. Features:Dimensions (height is with base installed, no spikes):5-3/4˝ W (front) x 8˝ W (rear) x 16-5/8˝ D x 54˝ HBase: 12-3/8˝ W x 19-3/4˝ DWeight: 80 lbs (product) / 99 lbs (shipping)Frequency Response: 14 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement:Three - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Drivers, coupled to:Four - 7˝ x 10˝ Quadratic Planar Infrasonic RadiatorsTwo - 5-1/4" High-DefinitionCast-Basket MVPP™Upper-Bass/Mid DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 20 - 650 watt/channelBuilt-In Subwoofer Power Amplification: 1600 watt ForceField Amplifier 

The Aon 2 and 3 are exceptionally compact, ultra-high-performance bookshelf speakers that were originally developed for use as nearfield monitors in professional mixing applications. The design goal was to produce modestly-sized shelf or stand-mountable speakers that would achieve accurate high-definition sonic reproduction, with superb three-dimensional imaging, comparable to that achieved by GoldenEar’s award-winning Triton Two Towers. Although they don’t have quite the awe-inspiring bass of the floor-standing Tritons, great care has been taken, and extensive technology has been incorporated, to ensure that the Aons can deliver a remarkably satisfying listening experience without the need for a separate subwoofer.Both Aon models incorporate GoldenEar-designed cast-basket bass/midrange drivers with technology derived from the midrange units developed for the Tritons. In addition, they both use the same extraordinary and costly High Velocity Folded Ribbon (HVFR™) high frequency radiator used in the Tritons. Lastly, each Aon model utilizes two side-mounted planar low-frequency radiators in a dynamically balanced configuration in order to properly load the bass/midrange drivers for an open, box-less midrange, while also contributing to the Aons’ remarkably extended bass for such small enclosures.The Aons are of a truncated pyramidal construction, which results in significant performance advantages due to the non-parallel cabinet walls and the reduced baffle area around the tweeter. Aesthetically, the sleek, attractive pyramid-inspired shape combined with appealing design details including piano-gloss black end-caps, results in beautiful speakers that are both elegant and distinctive.The ultra-compact, 12" Tall Aon 2 Bookshelf Monitor incorporates a 6", High-Definition, Multi-Vaned Phase Plug (MVPP™), cast-basket Mid-Bass Driver, coupled to two 6-1/2" Inertially-balanced side-mounted Low Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™). Features:Frequency Response: 42 Hz - 35 kHzEfficiency: 89 dBNominal Impedance: Compatible with 8 ohmsDriver ComplementOne - 6˝ Cast-Basket Mid/Bass DriverOne - HVFR™ High-Velocity Folded Ribbon TweeterTwo - 6-1/2˝ Side-Mounted Planar Low-Frequency RadiatorsRecommended Amplification: 10 - 200 watt/channelDimensions: 8˝ W x 10˝ D x 12˝ H

The Aon 2 and 3 are exceptionally compact, ultra-high-performance bookshelf speakers that were originally developed for use as nearfield monitors in professional mixing applications.The design goal was to produce modestly-sized shelf or stand-mountable speakers that would achieve accurate high-definition sonic reproduction, with superb three-dimensional imaging, comparable to that achieved by GoldenEar’s award-winning Triton Two Towers. Although they don’t have quite the awe-inspiring bass of the floor-standing Tritons, great care has been taken, and extensive technology has been incorporated, to ensure that the Aons can deliver a remarkably satisfying listening experience without the need for a separate subwoofer.Both Aon models incorporate GoldenEar-designed cast-basket bass/midrange drivers with technology derived from the midrange units developed for the Tritons. In addition, they both use the same extraordinary and costly High Velocity Folded Ribbon (HVFR™) high frequency radiator used in the Tritons. Lastly, each Aon model utilizes two side-mounted planar low-frequency radiators in a dynamically balanced configuration in order to properly load the bass/midrange drivers for an open, box-less midrange, while also contributing to the Aons’ remarkably extended bass for such small enclosures.The Aons are of a truncated pyramidal construction, which results in significant performance advantages due to the non-parallel cabinet walls and the reduced baffle area around the tweeter. Aesthetically, the sleek, attractive pyramid-inspired shape combined with appealing design details including piano-gloss black end-caps, results in beautiful speakers that are both elegant and distinctive.The compact, 14" Tall Aon 3 Bookshelf Monitor incorporates a 7", High-Definition, Multi-Vaned Phase Plug (MVPP™), cast-basket Mid-Bass Driver, coupled to two 8" Inertially-balanced side-mounted Low Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™). Features:Frequency Response: 38 Hz - 35 kHzEfficiency: 90 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    One - 7˝ Cast-Basket Mid/Bass DriverOne - HVFR™ High-Velocity Folded Ribbon TweeterTwo - 8˝ Side-Mounted Planar Low-Frequency RadiatorsRecommended Amplification: 10 - 250 watt/channelDimensions:    9˝ W x 11˝ D x 14˝ HBass Driver, coupled to two 8" Inertially-balanced side-mounted Low Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™).

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.\The smallest SuperCenter model is amazingly compact. The SuperCenter X incorporates one 7˝ x 10˝ quadratic planar low frequency radiator for surprisingly full-range performance from a modest sized enclosure. The SuperCenter X is just the perfect size and performance for the typical size living room or family room home theater system.  Features:Frequency Response: 45 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ Cast-Basket Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorOne - 7˝ x 10˝ Quadratic Planar Low-Frequency RadiatorRecommended Amplification: 20 - 200 watt/channelDimensions: 20˝ W x 5-3/4˝ H x 11˝ D

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.\The larger SuperCenter XL benefits from dual 6-3/4˝ x 8˝ quadratic planar low frequency radiators, giving it significant low frequency extension and exceptional dynamic range. The SuperCenter XL is perfect for larger home theater systems. Features:Frequency Response: 36 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ Cast-BasketMid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorTwo - 6-3/4˝ x 8˝ Quadratic Planar Low-Frequency RadiatorsRecommended Amplification: 20 - 250 watt/channelDimensions: 29˝ W x 5-3/4˝ H x 11˝ D

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.The mega-high-performance SuperCenter XXL is only 35” wide and includes four 5-1/4" drivers, the GoldenEar High Velocity Folded Ribbon tweeter, three planar passive radiators, and our unique linear-phase crossover, employing fully balanced technology and precision film capacitors. The unique balanced topology reduces stray capacitance in the magnetic circuit, among other things, with the result of dramatically improved clarity. There are three separate internal chambers: a larger one in the center which contains two 5-1/4˝ drivers which run up to meet the tweeter and are coupled to the larger, 7˝ x 10˝ passive radiator in the center, and two smaller ones which each contain a special 5-1/4˝ driver engineered for low frequency response, which runs up to 500 Hz, and is coupled to one of the smaller, 6-3/4˝ x 8˝ passives. Features:Frequency Response: 33 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement Four - 5-1/4˝ Cast-Basket Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorTwo - 6-3/4˝ x 8˝ Quadratic Planar Low-Frequency RadiatorsOne - 7˝ x 10˝ Quadratic Planar Low-Frequency RadiatorRecommended Amplification: 20 - 350 watt/channelDimensions: 35˝ W x 5-3/4˝ H x 11˝ D

The SuperCinema® 3D Array® soundbars are remarkable new loudspeaker systems that combine the elegant form factor of a soundbar with the extraordinary sonic performance of a true discrete-speaker surround system. The aesthetically compelling visual appeal of a soundbar is undeniable. Unfortunately, both passive and active soundbars fail to achieve a truly convincing surround-sound experience when compared to a high-quality, fully discrete multi-channel surround system. GoldenEar Technology has developed a unique new technology for our soundbars that incorporates special 3D image optimization technology to achieve superbly lifelike, wide, deep 3D playback realism with virtually no acoustic coloration.This technology, pioneered by Sandy Gross, effectively addresses certain problems that have been brought up recently in a 3D audio research project being conducted by Dr. Edgar Choueiri at Princeton University. Dr. Choueiri points out that the crosstalk that exists between the left and right loudspeakers and our contralateral ears, especially when the left and right channels are minimally separated (as we normally encounter in soundbar systems), is deleterious to our brain's ability to fully experience and process the imaging cues so necessary for 3D imaging perception.These imaging cues are present in the recordings but dramatically corrupted in typical soundbar playback where the left and right channel speakers are simply too close together.The 3D Array Soundbars incorporate left-, center- and right-channel speakers, plus a second set of drivers that utilize 3D Array Technology to effectively cancel out this crosstalk distortion between the left and right channel.The result is a front soundstage that stretches from wall to wall and beyond, with amazing height, width and depth that effectively envelops the listeners in a true 180-degree soundfield, much wider than the actual physical soundbar! All this is contained within sleek, attractive 2.7" thin enclosures that perfectly complements the latest super-thin flat panel TVs.The 3D Array soundbars are designed for use with a powered subwoofer - the GoldenEar ForceField Subwoofers are engineered to be the perfect high-performance match. SURROUND SPEAKERS OPTIONAL: Our unique 3D Array Technology delivers extraordinary surround sound performance with or without rear surround speakers. Excellent and convincing surround sound performance is achieved even without surround speakers, however, when the 3D Arrays are combined with a pair of rear surrounds (like our SuperSat 3s or Invisa In-Ceiling) the result is a mind-boggling true surround-sound experience that rivals discrete six-speaker (or more) systems. In fact, it actually surpasses all but the very best in the ability to dramatically recreate the realism of a live performance or a cinematic event.The 3D Array soundbars incorporate six (3D Array X) or eight (3D Array XL) of GoldenEar Technology’s spider-leg cast basket 4.5" bass-midrange drivers with our unique Multi-Vaned Phase Plugs (MVPP™). In addition, there are three of GoldenEar’s extraordinary High-Velocity Folded Ribbon tweeters (HVFR™). Both utilize our new, patent pending, Mag-X Coupling™ Crossover Technology, which delivers improved 3D imaging as well as smoother response and greater detail. The 3D Array X is an ideal match for 48"- 60" TVs, the 3D Array XL is an ideal match for 65" and up TVs. The beautiful piano-gloss-black-finished cabinets are aerospace-grade extruded aluminum with marble-powder-infused baffle and end-caps. They can be easily wall-mounted using their keyhole mounts or threaded brass inserts, or shelf-mounted using their adjustable rear supports. Specifications:Frequency Response: 80 Hz - 35 kHzEfficiency: 91 dBNominal Impedance   Compatible with 8 ohmsDriver Complement    Six - 4-1/2˝ High-Definition Cast-BasketMVPP™ Mid/Bass DriversThree - HVFR™ High-Velocity Folded Ribbon TweetersRecommended Amplification: 20 - 200 watt/channelDimensions:  49-1/8˝ W x 4-3/4˝ H x 2-3/4˝ D

The SuperCinema® 3D Array® soundbars are remarkable new loudspeaker systems that combine the elegant form factor of a soundbar with the extraordinary sonic performance of a true discrete-speaker surround system. The aesthetically compelling visual appeal of a soundbar is undeniable. Unfortunately, both passive and active soundbars fail to achieve a truly convincing surround-sound experience when compared to a high-quality, fully discrete multi-channel surround system. GoldenEar Technology has developed a unique new technology for our soundbars that incorporates special 3D image optimization technology to achieve superbly lifelike, wide, deep 3D playback realism with virtually no acoustic coloration.This technology, pioneered by Sandy Gross, effectively addresses certain problems that have been brought up recently in a 3D audio research project being conducted by Dr. Edgar Choueiri at Princeton University. Dr. Choueiri points out that the crosstalk that exists between the left and right loudspeakers and our contralateral ears, especially when the left and right channels are minimally separated (as we normally encounter in soundbar systems), is deleterious to our brain's ability to fully experience and process the imaging cues so necessary for 3D imaging perception.These imaging cues are present in the recordings but dramatically corrupted in typical soundbar playback where the left and right channel speakers are simply too close together.The 3D Array Soundbars incorporate left-, center- and right-channel speakers, plus a second set of drivers that utilize 3D Array Technology to effectively cancel out this crosstalk distortion between the left and right channel.The result is a front soundstage that stretches from wall to wall and beyond, with amazing height, width and depth that effectively envelops the listeners in a true 180-degree soundfield, much wider than the actual physical soundbar! All this is contained within sleek, attractive 2.7" thin enclosures that perfectly complements the latest super-thin flat panel TVs.The 3D Array soundbars are designed for use with a powered subwoofer - the GoldenEar ForceField Subwoofers are engineered to be the perfect high-performance match. SURROUND SPEAKERS OPTIONAL: Our unique 3D Array Technology delivers extraordinary surround sound performance with or without rear surround speakers. Excellent and convincing surround sound performance is achieved even without surround speakers, however, when the 3D Arrays are combined with a pair of rear surrounds (like our SuperSat 3s or Invisa In-Ceiling) the result is a mind-boggling true surround-sound experience that rivals discrete six-speaker (or more) systems. In fact, it actually surpasses all but the very best in the ability to dramatically recreate the realism of a live performance or a cinematic event.The 3D Array soundbars incorporate six (3D Array X) or eight (3D Array XL) of GoldenEar Technology’s spider-leg cast basket 4.5" bass-midrange drivers with our unique Multi-Vaned Phase Plugs (MVPP™). In addition, there are three of GoldenEar’s extraordinary High-Velocity Folded Ribbon tweeters (HVFR™). Both utilize our new, patent pending, Mag-X Coupling™ Crossover Technology, which delivers improved 3D imaging as well as smoother response and greater detail. The 3D Array X is an ideal match for 48"- 60" TVs, the 3D Array XL is an ideal match for 65" and up TVs. The beautiful piano-gloss-black-finished cabinets are aerospace-grade extruded aluminum with marble-powder-infused baffle and end-caps. They can be easily wall-mounted using their keyhole mounts or threaded brass inserts, or shelf-mounted using their adjustable rear supports. Specifications:Frequency Response: 80 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement:Eight - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversThree - HVFR™ High-Velocity Folded Ribbon TweetersRecommended Amplification: 20 - 300 watt/channelDimensions: 62-1/8˝ W x 4-3/4˝ H x 2-3/4˝ D

The SuperSat 3 and 3C are elegantly curved, compact satellite speakers designed for use when you want very high-performance yet small size, either for main left and right satellite, center channel or surround channel applications. A complete sub/sat system consisting of four SuperSat 3s, a SuperSat 3C and one of GoldenEar ForceField subwoofers has the power to fill an intimate room or a large grand space with glorious sound for your music or cinematic experience.Like SuperSat models, the 3C is the horizontal model optimized specifically for center-channel applications. The SuperSat 3C’s svelte, 2.7" deep, 12" tall cabinet is constructed from a rigid, non-resonant marble-powder infused polymer and is finished in a gorgeous piano-gloss black.Both SuperSat 3 and 3C incorporate two GoldenEar designed MVPP 4-1/2" cast spider leg basket bass/midrange drivers positioned on either side of the one of GoldenEar’s signature HVFR tweeter. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion‐like pleated diaphragm, rather than pushing it as conventional drivers do. The outcome is better impedance matching to the air in the room with greater control, smoother more extended response with lower distortion and dramatically improved dynamic range. The 3C includes an adjustable angling foot for ideal center channel positioning. Both models incorporate a threaded insert as well as a keyhole mount for wall mounting or use with the optional floor stand. Features:On-Wall/On-Shelf Center ChannelTwo 4-1/2" High Definition Bass/Midrange DriversOne High-Velocity Folded Ribbon TweeterPiano Black finish Specification:Frequency Response: 80 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver ComplementTwo - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channel

The SuperSat 3 is an elegantly curved, compact satellite speaker designed for use when very high-performance yet small size is desired. (It is also the ideal matching Surround/Rear speaker and on-wall Height channel speaker for any GoldenEar-based system.)  Four SuperSat 3s and one SuperSat 3C, combined with a ForceField 3 powered subwoofer, make up the superlative and award winning SuperCinema 3, a sub/sat 5.1 multichannel system.Every GoldenEar SuperSat speaker model takes advantage of the extraordinary GoldenEar High‐Velocity Folded Ribbon (HVFR™) design tweeter. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion‐like pleated diaphragm, rather than pushing it as conventional drivers do. The result is better impedance matching to the air in the room with greater control, smoother more extended response with lower distortion and dramatically improved dynamic range. Each SuperSat speaker model also utilizes GoldenEar’s ground‐breaking 4.5" cast-basket upper bass/midrange drivers, which incorporate our proprietary Multi-Vaned Phase Plug design (MVPP™) as well as our proprietary computer optimized cone topology, arranged in a D’Appolito array surrounding the HVFR tweeter.The SuperSat 3 includes a stand for shelf mounting. The model incorporates a rear threaded insert as well as keyhole mount for wall mounting options. The Keyhole mount allows flat-on-the-wall mounting and the threaded insert can be used with our SuperSwivel universal bracket. Or, use the optional SuperStand 3 Floor Stand - note total height of speaker and floor stand is 46". Specifications:Frequency Response: 80 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver ComplementTwo - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channelDimensions: 12˝ H (W) x 4-3/4˝ W (H) x 2-3/4˝ D

The SuperSat 50 is a slim, 27” long, 2.5”-deep speaker which is available in both a vertical version (on-wall or on optional Table/Shelf or Floor stand) as well as a horizontal, center-channel-optimized version, the SuperSat 50C. Its powerful and dynamic output capabilities make it the ideal center channel for a Triton based theater system, as well as a perfect choice to go alongside a wall- or shelf-mounted flat screen. Of course, the 2.5” depth makes it a perfect on-wall match for the new generation of super thin flat screens.Its cabinet is constructed from piano-gloss-black-finished aerospace-grade aluminum and contains two GoldenEar 4.5” cast basket bass/midrange drivers with Multi-Vaned Phase Plug (MVPP) configured in a D’Appolito array, surrounding the High-Velocity Folded Ribbon tweeter. Two 4”x 7” quadratic planar low-frequency radiators complete the driver complement. Wall mounting is easily accomplished using the threaded inserts or keyhole mounts on the rear, or table top using the optional smoked-glass Table/Shelf Stand 50, or even floor standing using the optional SuperStand 50 Floor Stand - note total height of speaker and floor stand is 48". The horizontal SuperSat 50C center-channel version includes adjustable leveling feet allowing for multiple angles when shelf/table top mounting.  Specifications:Frequency Response: 60 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Two - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channelDimensions: 26-3/4˝ H (W) x 4-3/4˝ W (H) x 2-1/2˝ D

The SuperSat 50 is a slim, 27” long, 2.5”-deep speaker which is available in both a vertical version (on-wall or on optional Table/Shelf or Floor stand) as well as a horizontal, center-channel-optimized version, the SuperSat 50C. Its powerful and dynamic output capabilities make it the ideal center channel for a Triton based theater system, as well as a perfect choice to go alongside a wall- or shelf-mounted flat screen. Of course, the 2.5” depth makes it a perfect on-wall match for the new generation of super thin flat screens.Its cabinet is constructed from piano-gloss-black-finished aerospace-grade aluminum and contains two GoldenEar 4.5” cast basket bass/midrange drivers with Multi-Vaned Phase Plug (MVPP) configured in a D’Appolito array, surrounding the High-Velocity Folded Ribbon tweeter. Two 4”x 7” quadratic planar low-frequency radiators complete the driver complement. Wall mounting is easily accomplished using the threaded inserts or keyhole mounts on the rear, or table top using the optional smoked-glass Table/Shelf Stand 50, or even floor standing using the optional SuperStand 50 Floor Stand - note total height of speaker and floor stand is 48". The horizontal SuperSat 50C center-channel version includes adjustable leveling feet allowing for multiple angles when shelf/table top mounting.  Specifications:Frequency Response: 60 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Four - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channel

The SuperSat 60 and 60C are larger, more powerful versions of our award-winning SuperSat 50 and 50C. They are designed to complement 60" and larger screens when used as left and right channels and mounted vertically next to them, as well as all screen sizes when used as a horizontal center channel or mounted on their optional stands. They provide a larger, more powerful, higher power-handling step-up from our SuperSat 50C when used as a center channel paired with any of our Triton Towers or with any of our other speakers including the SuperSat 50s.The sleek, attractively sculpted cabinet follows the same design philosophy that won the SuperSat 50 the highly respected Resi Award as the industry’s best looking on-wall loudspeaker. It is constructed from aerospace-grade aluminum and finished in gorgeous piano-gloss black. It contains four GoldenEar engineered 4.5" cast spiderleg-basket bass/midrange drivers with Multi-Vaned Phase-Plugs (MVPP) configured in a two-stage D’Appolito Array surrounding our signature High-Velocity Folded Ribbon high-frequency radiator. Two 4" x 7" quadratic planar low frequency radiators complete the driver complement, perfectly loading the bass/midrange drivers for open, boxless midrange and extended low-frequency response.The SuperSat 60 and 60C’s very thin depth makes them perfect for wall mounting next to the latest super thin TVs. This is easily accomplished using the threaded inserts or keyhole mounts on the rear. Dual adjustable feet allow multiple angles when shelf-mounting the horizontal center-channel 60C. In addition, optional floor and tabletop stands are available for vertical mounting. Specifications:Frequency Response: 50 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Four - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 300 watt/channel

The SuperSat 60 and 60C are larger, more powerful versions of our award-winning SuperSat 50 and 50C. They are designed to complement 60" and larger screens when used as left and right channels and mounted vertically next to them, as well as all screen sizes when used as a horizontal center channel or mounted on their optional stands. They provide a larger, more powerful, higher power-handling step-up from our SuperSat 50C when used as a center channel paired with any of our Triton Towers or with any of our other speakers including the SuperSat 50s.The sleek, attractively sculpted cabinet follows the same design philosophy that won the SuperSat 50 the highly respected Resi Award as the industry’s best looking on-wall loudspeaker. It is constructed from aerospace-grade aluminum and finished in gorgeous piano-gloss black. It contains four GoldenEar engineered 4.5" cast spiderleg-basket bass/midrange drivers with Multi-Vaned Phase-Plugs (MVPP) configured in a two-stage D’Appolito Array surrounding our signature High-Velocity Folded Ribbon high-frequency radiator. Two 4" x 7" quadratic planar low frequency radiators complete the driver complement, perfectly loading the bass/midrange drivers for open, boxless midrange and extended low-frequency response.The SuperSat 60 and 60C’s very thin depth makes them perfect for wall mounting next to the latest super thin TVs. This is easily accomplished using the threaded inserts or keyhole mounts on the rear. Dual adjustable feet allow multiple angles when shelf-mounting the horizontal center-channel 60C. In addition, optional floor and tabletop stands are available for vertical mounting. Specifications:Frequency Response: 50 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Four - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 300 watt/channel

The Invisa 525 are designed for in-ceiling and in-wall use. The driver motor structures and cone/voice coil assemblies (5.25") are based on those utilized in GoldenEar’s Triton and Aon speakers. Of course, they incorporate the GoldenEar High Velocity Folded Ribbon (HVFR™) tweeter and a complex crossover to perfectly blend the drivers for superb performance.The 525s come standard with a round, paintable MagneLock™ grille and there is an optional square grille available. Special attention has been given to achieving wide sonic dispersion that is so important in distributed audio systems. The tweeters twist and pivot to optimize performance and a high-frequency equalization switch allows precise matching to any environment.

The Invisa 650 are designed for in-ceiling and in-wall use. The driver motor structures and cone/voice coil assemblies (6.5") are based on those utilized in GoldenEar’s Triton and Aon speakers. Of course, they incorporate the GoldenEar High Velocity Folded Ribbon (HVFR™) tweeter and a complex crossover to perfectly blend the drivers for superb performance.The 650s come standard with a round, paintable MagneLock™ grille and there is an optional square grille available. Special attention has been given to achieving wide sonic dispersion that is so important in distributed audio systems. The tweeters twist and pivot to optimize performance and a high-frequency equalization switch allows precise matching to any environment.

Similar to the Invisa 650, the Invisa SP 652 is a very versatile all-in-one stereo speaker, which, when both channels are paralleled, also makes a great bipolar surround speaker as well as an in-ceiling Atmos height speaker. Solidly constructed of a marble-infused polymer, the unitized construction actually has the high-definition wide-dispersion dual-wound voice-coil 6-1/2” driver constructed as an integral part, with clear performance advantages. Special care has been taken to minimize deleterious diffraction effects that are common in many other stereo speakers that sink the drivers deeply into the structure. The two superb, but costly, HVFR™ tweeters are mounted in a special acoustically optimized high-frequency pod with a precisely calculated angle to maximize stereo coverage and radiation into the room. It is unique to find tweeters of this quality in single point stereo speakers. Two complex crossovers incorporating the highest quality components are utilized to precisely blend the drivers for seamless exquisite sound quality. A specially contoured santoprene anti-resonance/diffraction-control ring is incorporated around the driver and covering the surrounds to further optimize performance. There is also a high-frequency equalization switch to precisely match the SP 652 to any environment.

The Invisa Home Theater Reference 7000 is designed for use as a ceiling-mounted main front stage left, right, or center speaker in high-quality home theater or music systems, as well as for use as a side or rear surround speaker. In many installations it is also perfect as a height channel speaker. It has a flat, round, magnetically attached micro-perf grille that covers the mounting flange for an attractive, nearly “invisible” look. The drivers are mounted at precisely calculated angles so that they face the normal listening position for exceptional imaging, superior frequency response, remarkable clarity and precise focus. The driver complement combines the same superb 7" high-definition cast-basket driver used in the acclaimed Aon 3, with one of GoldenEar’s signature technology HVFR™ tweeters. A complex crossover network, with a high-frequency equalization switch, assures perfect blending. In order to achieve open, boxless, three-dimensional imaging that appears to come from across the front wall rather than the ceiling, great care has been taken to minimize deleterious diffraction effects as well as to optimize wave-launch into the room. This is achieved by utilizing and combining our FocusField™ Technology with a unique Non-Periodic Waveform (NPW) Diffraction Control and Wave-Launch construction.