Focal

Designed by Focal engineers for both Hi-Fi listening and Home Cinema use, the Sub 600P subwoofer completes your audio installation by providing a deep, impactful and controlled bass. Combined with your Home Cinema system, its power offers an even more sensational and realistic immersion.  Its Class D 600-watt amplifier supplies a 1113/16” (30cm) diameter Polyflex speaker driver, a heavier, more rigid cone promoting high power handling. Its closed design allows any interference noise to be avoided, reproducing the original sound signal as faithfully as possible. Finally, with its High Gloss black finish front panel, its brushed MDF cabinet body and its magnetic grille, the Sub 600P is a modern and discrete addition to your listening room. Specifications: Type: Active closed subwoofer  Speaker driver: 12" (30cm) Polyflex woofer Frequency response at -6dB: 26Hz Frequency response (+/-3dB): 28Hz–270Hz RCA input: Right, left LFE  Crossover frequency: Variable 40Hz-200Hz (LFE)  Phase adjustment: Phase inverter 0°/180°  Power modes: AutoStandby enable/disable  Amplifier power: 600W Dynamic (300W RMS)  Dimensions (HxWxD): 153/4′′x153/4′′x163/4′′ (400x400x425mm)  Weight: 46.3lbs (21kg)

Maestro Utopia Evo has become a three-way floorstanding loudspeaker in order to make it more versatile and easier to install in your listening room. The bass is very consistent but it still retains Maestro’s characteristic dynamic range and punch. The mid-range register hasn’t been neglected: we have integrated our latest technical innovations. In conclusion, each register reproduced by Maestro Utopia Evo has been enhanced for even more precision and dynamic range. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection. The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. Maestro Utopia Evo now offers bi amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.

The magic of cinema, at home!AUDIO-VIDEO PROCESSOR AND AMPLIFIER Like any true conductor who draws the best out of his orchestra, Astral 16 draws the very best out of high-fidelity and in-wall/in-ceiling loudspeakers by perfectly coordinating all the components within a sensational Home Cinema installation.Integrating a Class D Pascal Audio amplifier, Astral 16 has 16 channels, of which 12 are amplified and 4 are pre-amplified (balanced XLR outputs) and dedicated entirely to audio (filtering, equalization, bass management, etc.).This rock-solid foundation is your official invitation to an immersive journey through images and sound of unrivaled quality (sampling frequency supported up to 192 kHz)ALL AUDIO FORMATSAstral 16 covers all audio formats: Dolby Atmos®, DTS:X™, Auro-3D® etc. Equipped with technology that allows adjustments based on room characteristics (Room calibration, with Dirac Live®) and delivered with a calibrated measurement microphone, Astral 16 can be fine-tuned to suit all possible acoustical environments and desires. ADJUSTMENTS BASED ON ROOM CHARACTERISTICS Measurement microphone COMPATIBILITY Astral 16 is compatible with Control4, Crestron, Savant and RTI. Astral 16 benefits from the possibilities offered by these leading interface systems to enable perfectly seamless remote control of all your audio & video needs.ENDLESS CONFIGURATION OPTIONS iPad App Astral 16 comes with an app available on the App Store (via iPad) to drive the system you want room by room, as well as technical support (Remote Monitoring) for equipment diagnostics at any time.

Compact and powerful, Sopra N°1 is a concentration of technological innovation. It features "NIC" magnetic circuit,  TDM"" surrounds for the midrange woofer and Infinite Horn Loading (IHL) of the tweeter. It is a true "demonstrator", corroborating the contribution of the new technologies implemented on Sopra.First, the very low distortion gives it incredible clarity and very high definition combined with the spectacular spatialisation typical of bookshelf loudspeakers... Beyond this attractive first impression, what's astonishing is the texture and smoothness of its sound. It provides a solid, "fleshy" sound with full and articulated bass. Precious is by no means artificial, nor is the limited to the treble. The overall coherence and harmonic richness gives the listener a surprising understanding of the music. The Sopra line is destined for the most passionate sound enthusiasts. Its design favours performance, whilst bringing together the qualities expected of an object which will be integrated into very elegant interiors and décors. Lacquered or bloodwood finishes are associated to noble materials to create an elegant line. Substantial efforts were made to give the front a tidy appearance, particularly around the speaker drivers, to iron out any aspects which could afflict the acoustics or the appearance. Ideal for small rooms up to 270ft2 (25m2), Sopra n°1 is also ideal for spaces up to 550ft2 (50m2). Providing high sensitivity and excellent power handling, Sopra N°1 is a true little monitor for the home. Sopra N°1 is supplied with a special stand which has been designed to expel interfering vibrations from the enclosure towards the floor to avoid any colouration. The steel frame inside the floorstander, coupled with the 03⁄4" (19mm) thick glass base using four adjustable stainless steel spikes, provides very high transmission speeds. This is what guarantees an extremely sharp reproduction.NIC (Neutral Inductance Circuit)Since the beginning, we have always had a great interest in the magnetic circuit, an essential aspect of a speaker drive unit. The precision and detail of audio reproduction depends on the stability of the magnetic field. After having pushed back the limits in electromagnetic technology with the Grande Utopia EM and the Stella Utopia EM, our engineer discovered that the magnetic field varies regardless of its intensity. Indeed, it is not stable because it is modulated by three factors: the movement of the voice coil (Lenz's law), the current passing through it (Foucault current) and the frequency. Consequently, the voice coil, the moving part, is in the magnetic field which becomes too variable, and this leads to loss of precision.The NIC technology lies in a Faraday ring whose dimensions, materials and positioning we were able to optimise to make the magnetic field be no longer affected by the position of the voice coil, by the amperage or the frequency of the current passing through it. This solution permits to control the magnetic field to decrease the effects of distortion and give the sound a very high-definition and an unprecedented dynamic.TMD (Tuned Mass Damper)The midrange register is no doubt the most complicated to control in a sound system.Thanks to the power of finite element analysis, our teams have revealed resonances which alter definition in the suspension which connects the cone to the basketThe solutions already known for increasing the damping properties of the suspension all result in an increase of the mass which consequently alters definition. The answer came from a technology used in earthquake-resistant skyscrapers and which is also used for the suspension on racing cars. This technology is called a  " Tuned MAss Damper" : an additional mass oscillates in opposition to the resonance frequency to control it.Our Tuned Mass Damper consists in simply two tubular rings on the suspension to avoid deformation of the cone without afflicting the dynamics. It reduces drastically the distortion and increase the definition.IHL (Infinite Horn Loading)Our Beryllium tweeter features an incredibly light and extremely rigid dome, that deliver a transparent and dynamic sound. Its main limitation comes from the compression of air in the cavity behind it, that create interference with the incredible definition. To overcome this, the ideal would be to have a nearly infinite volume. But the requirement for Sopra to be compact meant that as much of the cabinet as possible had to be used for the bass. We had to explore other options for loading the tweeter, which led us to come up with the IHL system.The rear of the Beryllium tweeter is loaded via a small cavity which is connected to the exterior of the enclosure by a horn. whom inside is filled with a damping material. Sound waves from the rear of the tweeter are delicately and gradually absorbed. Its acoustic impedance approaches zero so that no resistance alters the movement of the dome. This reduces distortion by 30% and pushes definition to its maximum. 

Acoustic Sound Purity, Everywhere.Closed-back headphones for home and on-the-go useThis very high-end circum-aural headphones manufactured at Focal is equipped with a new generation of exclusive electrodynamic speaker drivers, capable of working at low acoustic load while offering an extremely extensive frequency response (5Hz – 40kHz).Thanks to the many cutting-edge technology which are integrated in its speaker drivers (the frameless 100% copper voice coil, ‘M’-shaped pure Beryllium dome), Stellia delivers a perfect sound, whether bass articulation or the highest frequency details. In addition, Stellia’s offers extremely low impedance at 35 Ω, making the headphones very easy to drive through the output of a mobile audio source: experience the purity of sound, everywhere.Each component has been developed with optimal acoustics in mind, without compromising on style. Because at Focal, innovation goes beyond technology; it influences product use and aesthetics. So, the two cognac and mocha finishesand the full-grain leather choosen sublimate this unique object.To fully enjoy your music and amplify yours emotions, discover Arche, a perfect audiophile DAC and amplifier to combine with your hi-fi headphones.Total ComfortStellia uses the headband and yoke mechanical features originally developed for the Utopia headphones. The consistent curve between these two elements offers flawless comfort, regardless of the shape and size of the listener’s face and head. This comfort is enhanced by the high-resilience memory foam used for the earpads.Nec Plus Ultra FinishesThe two cognac and mocha finishes and the full-grain leather chosen are testament to the meticulous attention paid to each and every detail of these elegant headphones.Perfect IsolationStellia soundproofing capacity has been further enhanced by its closed design and thanks to the earpads whose 50% of their height is designed to diffuse sound through a non-perforated full-grain leather and 50% absorbs the audio signal through an acoustic cloth which covers the memory foam.Exceptional Speaker Drivers‘M’-shaped pure Beryllium dome, frameless 100% copper voice coil, new surround… are technologies which offer exceptional dynamics for closed-back headphones and contribute to the reproduction of the tiniest sound details at both high and low frequencies. The respect of the original audio signal is unfailing and the neutrality is flawless, for voices and trebles of astonishing realism.The Focal engineers worked to achieve the pure sound: vents are integrated to extend the speaker driver’s frequency response; an EVA foam positioned behind the speaker driver absorbs high frequencies; acoustic diffusers break up standing waves to obtain sound reproduction that is free of interference... 

As well as new speaker drivers (a 5” midrange and a 10” subwoofer) with high efficiency and power handling, the Trio11 Be monitor enjoys all of Focal's very latest technologies when it comes to acoustics and electronics: TDM and NIC technologies; optimized vents that promote dynamic control and perfect bass definition; high excursion, enabling even more linearity of the subwoofer...Thanks to its class G amplification, Trio11 Be delivers a high SPL (118dB at 1m) and offers great versatility of use and installation configurations in nearfield AND midfield applications. A key asset, always coming along with extremely precise sound reproduction and stereo image. With an extended bandwidth (30 Hz-40 kHz), this loudspeaker is also composed of a 3-way monitor and a 2-way monitor, just like Trio 6 Be which lets you check the mix transfer sound quality thanks to FOCUS mode.With Trio11 Be, power and versatility are waiting for you! Feel the difference!Key PointsHigh SPL: 118 dB @ 393/8'' (1m).FOCUS Mode: two monitors in one with the remote switchover.Pure Beryllium inverted dome tweeterVery low directivity, linearity, dynamics.‘W’ composite sandwich cone on woofer and subwoofer:Neutral sound, no distortion.Bass, mid-bass and treble settings on rear panel: optimum acoustical integration.Optimized decoupling of the midrange speaker driver thanks to silent blocks.Ultra-low distortion and noise.Meticulous Finishes The cabinet developed and manufactured by Focal in its cabinetry workshop in Bourbon-Lancy in France, consists of two side panels and a body in MDF measuring between 13/16” (21mm) and 13/16” (30mm) thick: an indicator of the quality of each material chosen, combined with careful attention to the finishes.Trio11 Be has two side panels in a natural dark red burr ash veneer and a black central body, for an aesthetic rendering that is also discreet and hard-wearing.FOCUS mode 2 MONITORS IN 1 Trio11 Be combines two monitors in a single enclosure. The 3-way monitor provides a flawless control of the entire audio spectrum (30 Hz – 40 kHz). The 2-way monitor, with a frequency response of 90 Hz to 20 kHz, makes it possible to check the transfer quality of mixes on systems with a limited frequency response in the bass (televisions, computers, cars, etc.).

The loudspeaker that stands up to all weathers. In addition to its UV-treated, high-density Polypropylene damping cabinet, the 100 OD6* loudspeaker is IP66 certified** (Ingress Protection rating 66). This reference international standard demonstrates the remarkable resistance of products to extreme weather conditions, and more specifically their watertight and dust-proof qualities. Integrating Focal Technologies, the 100 OD6 loudspeaker delivers the Focal’s high-fidelity sound outdoors. It is also easy to install, thanks to its reinforced, notched assembly bracket. Its 180-degree rotation system makes it easy to position, too. And because, at Focal, attention is paid to each and every detail and to satisfying every taste, the grille and cabinet are available in black finish or white ready-to-paint finish. *Dimensions with brackets: 8.8”x10.1”x12.6” Focal Technologies An aluminium inverted dome tweeter for excellent sound dispersion; bass/mid-range speaker driver with a waterproof Polypropylene cone and Polyglass treatment for perfect definition: the 100 OD6 loudspeaker features high-performing components that all have a part to play in the sharing and experience of the Focal sound. Complementarity With its high impedance (8 ohms), the 100 OD6 loudspeaker offers the possibility of connecting two loudspeakers in parallel on the same amplifier output. Easy to install and use 100 OD6 is equipped with a reinforced, notched assembly bracket made from solid, anti-rust Aluminium, and offers the option to rotate the loudspeaker 180 degrees for unbeatable sound diffusion. The product is therefore easier to install, as well as to position, either vertically or horizontally, depending on your preference and the layout of your outdoor space. Specifications: Type Outdoor loudspeaker Speakers Aluminum inverted dome tweeter 61/2" (165mm) waterproof woofer with Polyglass treatment Sensitivity (2,83V/1m) 87dB Frequency response (+/-3dB) 65Hz-23kHz Low frequency point (-6dB) 55Hz Nominal impedance 8Ώ Minimal impedance 6.7Ώ Recommended amp power 20-120W Filtering frequencies 2,800Hz Dimensions (L x P x H) with brackets 8.8 x 10.1 x 12.6" (224 x 256 x 319mm) Net weight with brackets 9lbs (4.1kg)

The loudspeaker that stands up to all weathers. In addition to its UV-treated, high-density Polypropylene damping cabinet, the 100 OD6* loudspeaker is IP66 certified** (Ingress Protection rating 66). This reference international standard demonstrates the remarkable resistance of products to extreme weather conditions, and more specifically their watertight and dust-proof qualities. Integrating Focal Technologies, the 100 OD6 loudspeaker delivers the Focal’s high-fidelity sound outdoors. It is also easy to install, thanks to its reinforced, notched assembly bracket. Its 180-degree rotation system makes it easy to position, too. And because, at Focal, attention is paid to each and every detail and to satisfying every taste, the grille and cabinet are available in black finish or white ready-to-paint finish. *Dimensions with brackets: 8.8”x10.1”x12.6” Focal Technologies An aluminium inverted dome tweeter for excellent sound dispersion; bass/mid-range speaker driver with a waterproof Polypropylene cone and Polyglass treatment for perfect definition: the 100 OD6 loudspeaker features high-performing components that all have a part to play in the sharing and experience of the Focal sound. Complementarity With its high impedance (8 ohms), the 100 OD6 loudspeaker offers the possibility of connecting two loudspeakers in parallel on the same amplifier output. Easy to install and use 100 OD6 is equipped with a reinforced, notched assembly bracket made from solid, anti-rust Aluminium, and offers the option to rotate the loudspeaker 180 degrees for unbeatable sound diffusion. The product is therefore easier to install, as well as to position, either vertically or horizontally, depending on your preference and the layout of your outdoor space. Specifications: Type Outdoor loudspeaker Speakers Aluminum inverted dome tweeter 61/2" (165mm) waterproof woofer with Polyglass treatment Sensitivity (2,83V/1m) 87dB Frequency response (+/-3dB) 65Hz-23kHz Low frequency point (-6dB) 55Hz Nominal impedance 8Ώ Minimal impedance 6.7Ώ Recommended amp power 20-120W Filtering frequencies 2,800Hz Dimensions (L x P x H) with brackets 8.8 x 10.1 x 12.6" (224 x 256 x 319mm) Net weight with brackets 9lbs (4.1kg)

The loudspeaker that stands up to all weathers.In addition to its UV-treated, high-density Polypropylene damping cabinet, the 100 OD8* loudspeaker is IP66 certified** (Ingress Protection rating 66). This reference international standard demonstrates the remarkable resistance of products to extreme weather conditions, and more specifically their watertight and dust-proof qualities. Integrating Focal Technologies, the 100 OD8 loudspeaker delivers the Focal’s high-fidelity sound outdoors.It is also easy to install, thanks to its reinforced, notched assembly bracket. Its 180-degree rotation system makes it easy to position, too. And because, at Focal, attention is paid to each and every detail and to satisfying every taste, the grille and cabinet are available in black finish or white ready-to-paint finish.*Dimensions with brackets: 10.2”x11”x15.4”Focal TechnologiesAn aluminium inverted dome tweeter for excellent sound dispersion; bass/mid-range speaker driver with a waterproof Polypropylene cone and Polyglass treatment for perfect definition: the 100 OD8 loudspeaker features high-performing "made in Focal" components that all have a part to play in the sharing and experience of the Focal sound. 100 OD8 delivers a slightly higher efficiency and a power handling to 100 OD6, allowing configurations with higher volume.ComplementarityWith its high impedance (8 ohms), the 100 OD8 loudspeaker offers the possibility of connecting two loudspeakers in parallel on the same amplifier output.Easy to install and use100 OD8 is equipped with a reinforced, notched assembly bracket made from solid, anti-rust Aluminium, and offers the option to rotate the loudspeaker 180 degrees for unbeatable sound diffusion. The product is therefore easier to install, as well as to position, either vertically or horizontally, depending on your preference and the layout of your outdoor space.

The loudspeaker that stands up to all weathers. In addition to its UV-treated, high-density Polypropylene damping cabinet, the 100 OD8* loudspeaker is IP66 certified** (Ingress Protection rating 66). This reference international standard demonstrates the remarkable resistance of products to extreme weather conditions, and more specifically their watertight and dust-proof qualities. Integrating Focal Technologies, the 100 OD8 loudspeaker delivers the Focal’s high-fidelity sound outdoors. It is also easy to install, thanks to its reinforced, notched assembly bracket. Its 180-degree rotation system makes it easy to position, too. And because, at Focal, attention is paid to each and every detail and to satisfying every taste, the grille and cabinet are available in black finish or white ready-to-paint finish. *Dimensions with brackets: 10.2”x11”x15.4” Focal Technologies An aluminium inverted dome tweeter for excellent sound dispersion; bass/mid-range speaker driver with a waterproof Polypropylene cone and Polyglass treatment for perfect definition: the 100 OD8 loudspeaker features high-performing "made in Focal" components that all have a part to play in the sharing and experience of the Focal sound. 100 OD8 delivers a slightly higher efficiency and a power handling to 100 OD6, allowing configurations with higher volume. Complementarity With its high impedance (8 ohms), the 100 OD8 loudspeaker offers the possibility of connecting two loudspeakers in parallel on the same amplifier output. Easy to install and use 100 OD8 is equipped with a reinforced, notched assembly bracket made from solid, anti-rust Aluminium, and offers the option to rotate the loudspeaker 180 degrees for unbeatable sound diffusion. The product is therefore easier to install, as well as to position, either vertically or horizontally, depending on your preference and the layout of your outdoor space. Specifications: Outdoor loudspeaker Aluminum inverted dome tweeter 8" (210mm) waterproof woofer with Polyglass treatment Sensitivity (2,83V/1m) 88dB Frequency response (+/-3dB) 60Hz-23kHz Low frequency point (-6dB) 45Hz Nominal impedance 8Ώ Minimal impedance 6.7Ώ Recommended amp power 20-150W Filtering frequencies 2,800Hz Dimensions (L x P x H) with brackets 10.2 x 11 x 15.4" (258 x 280 x 390mm) Net weight with brackets 12.6lbs (5.8kg)

2-way surround loudspeakerSurround Be features an exclusive "Bi/Twin" design with twin inputs, enabling the loudspeaker to be used both in 5.1 (Bipolar mode) or 7.1 (double mono mode). This feature avoids having multiple surround loudspeakers in your Home Cinema.Surround Be is composed of:2 x 61/2" (16.5cm) "W" cone bass/midrange2 x pure Beryllium inverted dome tweeters 

Y” Adapter cable for FOCAL IMPULSE 4.320Features:Easy Plug & Play installationNo soldering – Direct IMPULSE 4.320 connection to your original manufacturer head unitNo modification of the original manufacturer equipment 

2 "ready-for-use" kits for installing the Focal Performance power amplifiers range. Complete kit including the 8,3 mm2 power cable, but also the speaker cable.Features:All in one” solution (amplifier and speakers)High-flexibility power cable (multiple braiding)90° RCA connectors for easier accessReady-for-use kit for optimal assembly of quality installations.Soecifications:Power cable: soft touch high-flexibility! 4.9m x 8.3mm2 (16Ft x 8AWG)Fuse box: gold-plated, mounted with 60A fuseGround cable: 1 m (3.3Ft)Remote cable: 5m (16.4Ft)RCA cable (PR5): 5m (2 x 90° plugs and 2 straight plugs)Speaker cable: 10m (32.8Ft)Accessory pack 

Honeycombed Damping MaterialJust like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and then increases the speaker performance. Aluminum Sheetessential component to the sandwich effect realization. This process permits to increase the performance of the viscoelastic complex. Viscoelastic ComplexSelf-adhesive, the butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car. Less noise means more music.Specifications:Replaces Plain chant Soundproof your car Attenuates the speaker back waveContent: Two 21 x 30cm sheets 

High-performance Stereo Cable for AmplifiersFeatures:High-performance stereo cable for amplifiers.Optimum connections to cancel the installation parasitic interference.100% Oxygen Free Cooper (OFC) conductor.“Soft Touch” (gives flexibility enables easy position in the most exiguous installations).Triple shielding (reduction of external interference).The OFC technology permits to reduce the dioxide formation and so it gives optimum efficiency of high frequencies.The perfect technical complement for FPS amplifier installations.Optimum quality connection partly thanks to a cracked join that enables a good “spring ” effect on the sockets.​1x 3m extension (conductor gauge=1.5mm2 : 0.12 x 10 x 2 + aluminum core + 0.12 x 64 strands)

This rigid carrying case is an elegant way of transporting Focal Utopia or Elear headphones and a cable. The thermo-formed interior compartment is designed to keep the headphones and their cable completely safe. The case is meticulously finished, with a cover in flecked fabric and a handle. This case is the ideal extra purchase when you buy your headphones for carrying them in luggage or a small bag or to tidy them away out of sight at home.

High-performance cables for speakers. Coaxial kit connection to the subwoofers. Roll of 12m x 1.5mm2 (133 strands x 0.12mm).  

Coaxial kit connection to the subwoofers. Roll of 12m x 2.5mm2 (224 strands x 0.12mm). Insulator: “Flexible PVC Soft Touch”. 100 % Oxygen Free Cooper (OFC) conductor. The OFC technology permits to reduce the dioxide formation and so it gives optimum efficiency of high frequencies. The perfect technical complement for Elite installations (Utopia / K2 Power speakers).Features:High-performance cables for speakers.Insulator: “Flexible PVC Soft Touch”.100% Oxygen Free Cooper (OFC) conductor.The OFC technology permits to reduce the dioxide formation and so it gives optimum efficiencyof high frequencies.The perfect technical complement for ELITE installations (UTOPIA / K2 POWER speakers). 

PK21 ready-for-use” kits created for the installation of the PERFORMANCE power amplifiers range. Complete kit including the cables and accessory pack.Features:“All in one” solution (amplifier and speakers)High-flexibility power cable (multiple braiding)90° RCA connectors for easier accessReady-for-use kit for optimal assembly of quality installations.​Specifications:Power cable: Soft touch high-flexibility! 4.9m x 21mm2 (16Ft x 4AWG)Fuse box: gold-plated, mounted with 80A fuseGround cable: 1 m (4AWG)Remote cable: 5m (16.4Ft)RCA cable (PR5): 5m (2 x 90° plugs and 2 straight plugs)Speaker cable: 10m (32.8Ft)Accessory pack   

The high-performance PR5 RCA cable is equipped with 90° elbow connectors for hard-to-reach areas, for easier installation  

This small accessory allows to 2 IBus together with one remote control. Simplicity and ergonomy.

High-performance Stereo Cable for AmplifiersFeatures:High-performance stereo cable for amplifiers.Optimum connections to cancel the installation parasitic interference.100% Oxygen Free Cooper (OFC) conductor.“Soft Touch” (gives flexibility enables easy position in the most exiguous installations).Triple shielding (reduction of external interference).The OFC technology permits to reduce the dioxide formation and so it gives optimum efficiency of high frequencies.The perfect technical complement for FPS amplifier installations.Optimum quality connection partly thanks to a cracked join that enables a good “spring ” effect on the sockets.​1 x 1m extension (conductor gauge=1.5mm2 : 0.12 x 10 x 2 + aluminum core + 0.12 x 64 strands)

This ‘ready-for-use’ wiring kit includes the best in terms of high-end connectivity: 17ft (5.20m) x 35mm2 (3087 strand) 100% OFC power cable, 2ft 3in (0.70m) ground cable, gold-plated fuse holder with a 200A fuse + equipped with a digital battery reader, an ER5 RCA cable, and a set of accessories. This kit is ideal for a 1500W amplifier. Focal recommends connecting this kit to the FPS 3000 or to a system with an amplifier and a subwoofer wired in series.

The 5'' (130mm)  Access 130 AS 2-way component speaker kit is very versatile. It fits perfectly into your vehicle interior and offers three different mounting options for the tweeter. You can very easily use the tweeter's 3-position level control, thanks to its separate, easy-to-fit filter.This kit combines dynamic bass with precise treble, for prolonged listening without auditory fatigue. Focal pays extreme attention to the reliability and musicality of all its products including the Access range, which has all the brand's DNA and tradition of more than 30 years..Features:Cone DFS® (Dual fiberglass Structure) (climatic and power) high resistance Tweeter level adjustmentSpecifications:Woofer: 5" (130mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 07/16" (11mm)Magnet: 31/3" (85mm)Tweeter: Aluminum inverted domeAjustable Tweeter level: 3 positions (-3/0/+3dB)Crossover: 12dB/octMax. power: 100 WattsNom. power: 50 Watts RMSSensitivity (2.83V/1m): 90dBFrequency response: 65Hz – 20kHzAccessories: Supplied grilles  

IC VW 165 is a coaxial speaker kit compatible with Volkswagen® cars. Easy to install, thanks to OEM Volkswagen® connectors, integrated crossover and Volkswagen® standard ABS molded basket, both 6,5'' (16,5cm) speakers are equipped with Fiberglass cones that provide a neutral sound, without coloration. Aluminum inverted dome TN44 tweeter provides non-directive smoothness and definition trebles.

The Access 165 AC coaxial kit puts Focal sound in your car with no fuss. Measuring 6½" (165mm) in diameter and with 60 W rated power, this kit is easily fitted for an effective, responsive audio system.This car audio kit marks access to the performance world: remarkable power handling, deep bass and extremely dynamic sound. All this is possible thanks to numerous Focal technical innovations and a new choice of specific materials.Features:Cone DFS® (Dual fiberglass Structure) (climatic and power) high resistanceHigh sensitivity (Direct headunit using)High dynamiqueRotativ tweeter

The Access 165 AS car audio 2-way component kit is of sufficiently high sensitivity to be directly connected to a car stereo. It has 3-position tweeter adjustment for optimal listening comfort. Accessories shipped with the tweeter enable multiple fitting options and finding the best sound stage.Discover new musical sensations and enter the world of performance with a kit that offers multiple configuration possibilities to enhance your audio installation. This range's reference model is a best-seller with a worldwide reputation..Features:Cone DFS® (Dual fiberglass Structure)(climatic and power) high resistanceHigh sensitivity (Direct headunit using)Tweeter level adjustment Extented in low frequenciesSpecifications:Woofer: 61/2" (165mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 07/16" (11mm)Magnet: 31/3" (85mm)Tweeter: Aluminum inverted domeAjustable Tweeter level: 3 positions (-3/0/+3dB)Crossover: 12dB/octMax. power: 120 WattsNom. power: 60 Watts RMSSensitivity (2.83V/1m): 91.3dBFrequency response: 60Hz – 20kHzAccessories: Supplied grilles  

IS TOY 165 is a two-way component kit with a 6,5" woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models widespread in Europe and the rest of the world. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IS 165TOY kit has been designed respecting the factory connectors for a real facilitated integration..Features:Easy installationRespect of the original TOYOTA® connectorsBetter precision in high frequenciesCompact tweeter for better adaptation in factory locationHigh density rubber ring for acoustic sealing with the door panelSpecifications:Woofer: 61/2" (165mm)Voice-coil diameter: 1" (25mm)Magnet: 31/3" (85mm)Aluminum inverted dome compact tweeterMax. power: 120 WattsNominal power: 60 Watts RMSSensitivity (2.83V/1m) : 91dBImpedance: 4 OhmsFrequency response: 60Hz - 20kHz 

This acoustic insulation kit is completing and essential to a quality car audio installation. From its use depends optimum acoustic rendering of speakers, amplifiers and installed accessories. Technical materials made of honeycombed damping material, an Aluminum sheet and a viscoelastic complex (Butyl).Features:Soundproof your carAttenuates the speaker back waveReplaces Plain chantObserve carefully the laying conditions (min. temperature +15° on a clean surface)Content: one 0.5 x 6m sheet (3m2)Money-saving extra sizeCapacity: about 4 doorsIncreases the bass level in your carIncreases the soundproofing of outside noise

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V2.HILO.V2 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. Entirely developed by Focal, HILO is now available under generation 2. It is 100% rethought to match any OEM head-unit thanks to its DC and AC voltage detection, and providing a full compatibility with FPX range.Features:Converts a stereo amplified signal in two low-level line outputs for an amplifier.Eliminates parasitic interferences - separated groundsSelectable DC and AC voltages detection – full compatibility with any original manufacturer head-units.Automatically generates a remote control signal to activate the associated amplifierCan be used in passive mode without 12V power supply (In that case the remote output doesn’t work) 

The FPX 4.400 is a very compact 4-channel amplifier with a power of 4x70 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.400 is the most “sound quality” model in this range. Thanks to its very comfortable power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.Features:An audiophile and versatile amplifierOptimized heat dissipationExtremely versatileRemarkable power/performance/price ratioAB Class 4/3/2 Channels amplifier - Dedicated to sound qualityStable under 2 OhmsAudiophile Sanken® TransistorsHigh performance compact heat dissipation chassisHigh power and current dynamic reserveSpecifications:4-/3-/2-channel Class ABD amplifier2-/4-channel input modesStable at 2 OhmsActive crossover for each pair of channelsThe FPX 4.400 measures 314x175x57mm)CEA power (4 ohms) 4x70 Watts RMS Max. power (2 ohms) 4x100 Watts RMS Max. power (4 ohms bridged) 2x200 Watts RMS Bandwidth (-3dB) 10Hz – 22KHz THD 0.04% Crosstalk (1 KHz) > 54dB SNR (1W/A) > 77dBA

The FPX 4.800 is a very compact 4-channel amplifier with a power of 4x120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.Features:D class 4/3/2 Channel amplifierStable under 2 OhmsAudio Mos-Fets - Optimized efficiencyHigh performance compact heat dissipation chassisHigh power and current dynamic reserveSpecifications:D Class amplifier - 4/3/2 channelsCEA power (4 ohms): 4x120 WrmsMaximum power (2 ohms): 4x185WrmsMaximum power (bridged 4 ohms): 2x370WrmsBandwidth: 10Hz – 20KHzTotal harmonic distortion: 0.01%SNR (1W/A): >76dBAConfigurable filters High Pass / Low Pass : 50Hz-500HzBass boost: (0/12dB)Mirroring Mode: (4CH/2CH)Protections: Short circuit / low impedance /reversal of polarity / DC / power drop / heat protectionDimensions (LxHxW): 921 (237x132x5

The IS VW 165 2-way separate kit is designed for all drivers who wish to replace their original audio system with a hi-fi quality sound solution that is simple and quick to install. The speakers incorporate Polyglass technology, which delivers well-defined mids and bass. The sound is natural and without coloration. The aluminum inverted dome tweeter, Focal technology, allows for perfect treble reproduction in addition to sound diffusion in all directions. Tweeter mounting foams and anti-vibration foams are provided for uncompromising installation.- Quick installation- Frame-integrated spacer: perfect integration in original slots- Dedicated vehicle connector: no cables to cut or solder- Improved sound quality and sound level- No additional accessories required- Dedicated connectors enable these loudspeakers to be used in conjunction with the Impulse 4.320 amplifier.

This 2-way component kit with 61/2″ woofers truly bears the Focal signature. The PS 165 V1 is equipped with the same cutting-edge technologies as the other speaker drivers in the Performance line: Polyglass cone, diamond-cut aluminium chassis, phase plug and processed aluminium inverted dome tweeters.The PS 165 V1 car audio kit really makes the difference. It can very easily be used to set up a high-quality customised installation. Its separable crossover, with one part for the woofer, the other for the tweeter, makes it much easier to install. Offering high-fidelity sound and high sensitivity, the PS 165 V1 will ensure you get the best performance, whether you use an amplifier or not.Create your sound thanks to this high-performance car audio kit. The expert engineers at Focal have come up with a high-quality kit which combines power, high-fidelity, durability and a compact design. Offer yourself the best without compromise with the PS 165 V1 speaker driver..Features:Create your own sound in your car with this two-way component kit.Polyglass conePartial horn loading tweeterHigh sensitivityDynamics and neutralityAdjustable tweeter levelsThree tweeter cut-off frequenciesThree tweeter integration possibilitiesSpecifications:Diameter: 61/2” (165mm)Voice-coil diameter: 1” (25mm)Voice-coil height: 07/16” (11.5mm)Magnet: 31/3” (85mm)Processed Aluminum inverted dome tweeterSeparate crossover: 0; -3; -6dBMax. power: 160 WattsNom. power: 80 Watts rmsSensitivity (2.83V/1m): 92.5dBFrequency response: 60Hz – 20kHzAccessories: Supplied grilles

The two-way coaxial speaker drivers kit IC 690TOY is designed with elliptical suited for the front or rear factory locations in Toyota® vehicles. The IC 690TOY has been designed respecting the factory acoustic of the brand’s vehicles and allows thus to benefit from an optimal musicality in a few steps only. Forget the factory sound of your car, discover the neutral and precise Focal sound on the road and 100% « Plug & Play ».Features:Easy installationRespect of the original TOYOTA® connectorsBetter precision in high frequenciesCompact tweeter for better adaptation in factory locationHigh density rubber ring for acoustic sealing with the door panel

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms! The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.Specifications:Only one amplifier for the entire hi-fi installationEasier to integrate and installCompact designSubstantial power and great musicalityExtremely versatileA dedicated subwoofer channel (+ remote control)Input selector (2/4/6 channels)Stable under 4 and 2 OhmsAdjustable active crossover for each pair of channelsDimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)

The legend is growing…  Undisputed musicality Unbelievable musicality, a beautiful design and easy to install, Scala Utopia Evo has retained all the qualities of the previous version which has been unanimously acclaimed by the most discerning audiophiles world wide.The Scala V2 takes you closer to the music with enhanced emotion and listening pleasure. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection.The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. The three-way floor standing loudspeaker Scala Utopia Evo now offers bi‑amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.                                    

Unbelievable musicality, a beautiful design and easy to install, Scala Utopia Evo has retained all the qualities of the previous version which has been unanimously acclaimed by the most discerning audiophiles world wide.The Scala Εωο takes you closer to the music with enhanced emotion and listening pleasure.

Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. Semi “Plug&Play”, Impulse 4.320 is a miniature 4-channel digital amplifier delivering 4 x 55 Watts. Impulse 4.320 is the perfect complement for your Focal Integration speaker drivers.Features:Ultra-compact – Easy to installCompatible with all head units (OEM and after-market)Automatic start-up with your original head unitISO compatible via cable accessories sold separatelySpecifications:CEA power (4 Ohms): 4x55WrmsPower max (2 Ohms): 4x80WrmsPower bridged (4 Ohms): 2x160WrmsBandwidth: 10Hz / 20KHzMinimum THD: 0.02%SNR: 80dBAWeight: 1.2lbsDimensions: 67/8x25/8x17/8" (175x66.5x47mm) 

This bookshelf loudspeaker from the Kanta N°1 line will discreetly blend into any unit or stand: it is the perfect solution for rooms under 270 ft2 (25 m²). Entirely dedicated to acoustic performance and with a resolutely personal aesthetic: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers.The result? A precise, detailed sound,brimming with warmth and musicality. It is the start of a new era for those who love sound... There’s a surprise in store right from the start of your listening experience, in the form of the extent of the bass frequency response for its dimensions. When positioned in an enclosed space such as this, or near to a wall, a piece of foam can be slid into the vent to optimise the bass even further.Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design!With eight front panel finishes, gloss or matt, there are several possible combinations. So many styles, each one so different from the next, means there’s something for everyone.Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision.This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear.The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings.When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look.A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes.With the High Gloss black shell there are four baffles available:High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer.  

This bookshelf loudspeaker from the Kanta N°1 line will discreetly blend into any unit or stand: it is the perfect solution for rooms under 270 ft2 (25 m²). Entirely dedicated to acoustic performance and with a resolutely personal aesthetic: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers.

The Kanta stand is available, as an option, the larger size stand (adjustable height of 24 to 25 inches - 615 to 641 mm) is available as an option for a classic installation of Kanta N°1.Finish: Graphite Black

Kanta Center is the perfect way to complete a multichannel system from the line. It provides the exact same level of performance, whether at low or very high volume. It is therefore an excellent addition when combined with Kanta N°1 floor standing loudspeakers or the bookshelf loudspeaker, whatever the front and back configuration. The extreme definition of the higher mid-range register and its tonal balance make this a formidable weapon in any Home Cinema set-up. Film fans will be surprised by the sound clarity and speech intelligibility, which are far superior to the norm. The remarkable neutrality lends itself to thrilling emotion for an unparalleled Home Cinema experience. The Sub 1000F subwoofer is the complementary solution to make an ultra high level Home Cinema configuration. And, when it is then linked with the 300 ICW 4 in-ceiling loudspeakers, even the most exacting film fans will enjoy an incredible 3D audio experience in Dolby Atmos, DTS X or Auro-3D.Optional stand available for optimal integration under the screen.For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision.  This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression.Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear.The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look.A wide range of combinations are available to fit into every interior space.The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes.With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer.With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.  

Kanta N°3 is the reference product for the line: this Hi-Fi loudspeaker superbly combines depth, impact and articulation of the bass register. The definition and neutrality of the midrange are incredible. The next generation IAL tweeter reproduces the tiniest details with clinical precision. The result? A precise, detailed sound, brimming with warmth and musicality. It is the start of a new era for those who love sound...This acoustic masterpiece performs at its best in large rooms, from 430 to 860 ft² (40 to 80 m²). Entirely dedicated to acoustic performance and with an incredibly original look: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive Hi-Fi technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers. Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design! With eight front panel finishes, gloss or matt, there are several possible combinations. So many different styles, each one so different from the next, means there’s something for everyone. Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision. This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear. The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint.  Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look. A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes. With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer. With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.