Barefoot

The Footprint®02 Gen2 continues the evolution of Barefoot Sound’s acclaimed monitor lineup, delivering the same high-performance DNA as the flagship models in a more compact and accessible form. While the original Footprint®02 carved out its place as the mid-sized solution in the Footprint® series, the Gen2 takes things further with reengineered drivers, updated DSP, and refined cabinet acoustics, all designed to offer stunning accuracy and sonic integrity in smaller studio spaces.Like its larger sibling, the Footprint®02 Gen2 features a fully tri-amplified 3-way system with dedicated Class D amplification for each driver. A powerful 1-inch dual-ring radiator tweeter, a precision-engineered 5-inch aluminum cone midrange, and dual 6.5-inch aluminum cone Dual-Force™ Technology woofers work together to deliver seamless crossover transitions, improved transient response, and high output with minimal distortion. Each component has been upgraded for enhanced linearity, deeper low-end extension, and sharper midrange clarity, making the Gen2 ideal for mixing, mastering, and immersive setups where space efficiency matters.At the core of the Footprint®02 Gen2 is Barefoot’s patented SPOC™ (SPectrally Optimized Conversion) Technology, which places analog filtering ahead of digital conversion for improved signal-to-noise ratio, greater resolution, and more transparent high-frequency reproduction. Combined with a new low latency DSP engine, the result is more precise imaging, extended bass, and accurate real-world translation.The cabinet design has also been refined with increased internal volume, optimized damping, and enhanced rigidity, all housed in the signature sealed MDF enclosure finished in Barefoot’s iconic textured gray coating. This rugged, elegant design ensures clean, tight low-end performance without the artifacts often introduced by ported systems.The Footprint®02 Gen2 also features Barefoot’s MEME™ (Multi Emphasis Monitor Emulation) Technology, enabling you to instantly switch between multiple reference speaker types from consumer speakers to vintage mix cubes without changing your monitoring position.Whether you’re building a stereo setup or crafting a compact immersive system, the Footprint®02 Gen2 delivers flagship Barefoot performance in a space-efficient form factor. With its unmatched balance of power, precision, and size, it stands as the ideal middleweight solution in the Footprint® series.

The Footprint®01 Gen2 is a complete reinvention of one of Barefoot Sound’s most acclaimed monitors, redesigned from the ground up to deliver even greater precision, power, and transparency. While the original Footprint®01 set a high standard for compact professional monitors, the Gen2 surpasses it in every meaningful way, both technically and sonically. This next generation model introduces a fully tri-amplified 3-way architecture, providing dedicated Class D amplification for each driver to ensure optimal performance, headroom, and efficiency across the frequency spectrum. At the heart of the Footprint®01 Gen2 is a suite of newly developed Barefoot drivers, including a 1-inch dual ring radiator tweeter, a 5-inch aluminum cone midrange driver, and dual 8-inch aluminum cone woofers integrated into the cabinet using the proprietary Dual-Force™ Technology coupling system. Engineered for extended linear excursion, reduced distortion, and improved transient response, these custom drivers deliver tighter imaging and a more revealing soundstage. The new DSP platform features SPOC™ (SPectrally Optimized Conversion), Barefoot’s patented technology that introduces analog crossover filtering before digital conversion, preserving high frequency detail and significantly improving signal to noise ratio. This allows the Gen2 to achieve higher resolution, improved clarity, and ultra low latency for an unmatched mixing and monitoring experience. To support all this technological advancement, the cabinet itself has been acoustically refined with increased internal volume, optimized bracing, and enhanced damping, housed in a sealed enclosure with a sleek industrial finish. Together, these innovations make the Footprint®01 Gen2 not just a worthy successor but a truly next level monitor that brings flagship performance to a wider range of studios and creators. Whether you’re mixing in stereo or building a 7.1.4 immersive studio, the Barefoot Sound Footprint®01 Gen2 delivers elite performance in a footprint that’s right-sized for today’s production environments. It’s the perfect fusion of next-generation engineering, real-world versatility, and Barefoot’s legendary sonic signature.

Barefoot’s compact MicroStack45 stereo system comprises two MicroMain45 3-way active nearfield reference monitors and two MicroSub45 Dual-Force™ technology subwoofers. Each system combines six high-excursion 8-inch woofers, four 2.5-inch midrange drivers and two 1-inch tweeters working seamlessly together as a single unit driven by 2220W of power.The MicroMain45 distills the resolution and accuracy of the MiniMain12 into a compact, lighter and more cost-conscious package shares the same amplifier, driver technology and DSP as Barefoot’s flagship system. The MicroMain45’s no-compromise design combines an 8-inch aluminum woofer, two 2.5-inch aluminum midrange drivers and a 1-inch tweeter to deliver over 600W of power with a 40 Hz–45 kHz frequency response.The MicroSub45 houses a pair of opposing 8-inch Dual-Force™ technology woofers and an analog high-pass filter crossing over from the MicroMain45 at 80 Hz, delivering clean low-frequency extension down to 25 Hz. Dual-Force, a core technology that is found in almost every Barefoot product, eliminates vibration within the MicroSub45 speaker cabinet through its innovative force cancellation design. The opposing woofers significantly reduce distortion and coloration, add a massive internal metal cabinet brace and cause the subs to radiate as if they were a single point source located on axis with the tweeter.A sturdy, non-slip tilt feature directs the MicroMain45 monitors at the listening sweet spot.Current MicroMain45 owners can add a pair of MicroSub45 Dual-Force technology subwoofers to create a MicroStack45 system.

Barefoot LFE15, a masterpiece of audio engineering that sets new standards in the world of professional subwoofers. Barefoot Sound, recognized as a leader in the professional audio industry, introduces its LFE15 model, synonymous with innovation, power, and precision.At the heart of the Barefoot LFE15 are two exceptional 15-inch subwoofers, perfectly matched through innovative Dual-Force technology. This unique approach counteracts the movements of the two subwoofers, eliminating unwanted cabinet vibrations and ensuring pure, dynamic, and incredibly precise bass response. With bass extension reaching 15Hz, the LFE15 delivers a listening experience that exceeds all expectations.Thanks to its no-compromise design, the LFE15 integrates seamlessly with the entire Barefoot product range, making it the ideal audio solution for both audiophiles seeking the highest quality sound, and professional studios looking to expand their surround mixing capabilities or build cutting-edge Dolby Atmos setups.A distinctive feature of the LFE15 is its unique “Boost” mode. This innovation overcomes the limitations of traditional 2.1 crossovers, enhancing and expanding low frequencies in stereo configurations through the use of a refined low-pass filter. This system, by eliminating the risk of phase cancellation, gives the sound unprecedented power, depth, and impact.The LFE15's looks match its audio performance. Featuring a modern, commanding design, this subwoofer combines intuitive control panels, aluminum amplifiers, and rugged driver grilles, offering a sleek, stylish subwoofer that will complement any space.Equipped with a dedicated 1400W amplifier and capable of reaching a maximum sound pressure level of 130dB, the LFE15 demonstrates formidable acoustic power. With features such as a gain selector, which allows for a +10dB boost, and a footswitch input for muting control, the subwoofer proves incredibly versatile, adapting to a wide variety of listening environments and contexts.The LFE15 reflects Barefoot Sound's commitment to creating products of unsurpassed quality for those who demand more.

Footprint03, the next evolution of Barefoot Sound Footprint studio monitors, comprises a 6.5-inch, 3-way active studio monitor pair equipped with newly designed drivers and reimagined DSP. Footprint03 is also the first pair of Barefoot monitors outfitted with patented SPectrally Optimized Conversion (SPOC) technology, delivering clearer sound than ever. As the most compact Footprint monitor yet, the Footprint03 fits seamlessly into small studio spaces; it also has rear VESA mounts for smooth integration in immersive audio setups. And like all Barefoot offerings, this monitor pair retains built-in MEME (Multi Emphasis Monitor Emulation) technology, eliminating the need for multiple sets of reference monitors. Put your best foot forward with the Footprint03 and enjoy clear, accurate, and revealing sound in the most compact and affordable package yet.

Introducing the MicroSub45.  Featuring Barefoot Sound’s innovative Dual-Force™ technology, the MicroSub45 brings the MicroMain45 to new power and depths.  The subwoofers boasts dual-opposing 8” subs in each of the two cabinets. The MicroMain45 has turned into a cult speaker that musicians love. A common request from users since the release of the MicroMain45 is for Barefoot Sound to build a companion subwoofer. So Barefoot has built a subwoofer as an off-the-menu item. But as demands have been overwhelming, it’s time to bring this product into the light.Introducing the MicroSub45 featuring Barefoot Sound’s innovative Dual-Force™ technology The MicroSub45 brings the MicroMain45 to new power and depths with a pair of dual-opposing 8” subs in each cabinet and Dual-Force™ Technology.The MicroMain45 is the only Barefoot that doesn’t feature Dual-Force™ Technology. But now there is a path for MicroMain45 users who want to take it to the next level. Or if you’re interested in a pair of MicroMain45s and want the option to upgrade down the road as your needs grow, this is the perfect solution!The MicroMain45s can be placed on top or below the MicroSub45, depending on your preference. The tilt feature allows the MM45 to be positioned down to the listening sweet spot and it is designed so that the stack is very sturdy and will not slip.The subwoofers is the MicroSub45s. When packaged with the MicroMain45s, it becomes the MicroStack45.  The stack features six high excursion 8” drivers, all designed to work seamlessly together and as a single unit. Each MicroSub45 features analog crossovers which allows analog signal paths into the sub and also into the MicroMain45. It crosses over at 80hz and goes down to 25hz.Features:Comes in a pairDual 8” subs in each cabinetDual-Force™ Technology1000 Watts of PowerBass response down to 25HzBalanced analog High-Pass filterSpecifications:Crossover Frequency: 80 HzSubwoofers: Dual 8″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 500W in each cabinetAC Power Input: 85 VAC to 265 VACPower Consumption: Idle: 5W, Maximum: 765WWeight: Speaker: 45 lbs each (20.5 kg)Shipping: 54.5 lbs each (25 kg)Dimensions HxWxD: Cabinet: 14.0 x 9.5 x 13.0 inches (356 x 241 x 330 mm)Overall: 14.0 x 10.25 x 13.6 inches (356 x 260 x 345 mm)

As a 3-way active monitor, the Barefoot MicroMain45 utilizes the same amplifier, signal path and driver technology of the MiniMain12. Downsizing the hefty 130+ lbs size of the original to a tight 35+ lbs package, the MicroMain45 features an 8” aluminum woofer, two x 2.5” aluminum midranges and a 1” tweeter. With a bass response of -3dB @ 40Hz, frequency response of 40Hz – 45 kHz (±3dB) and 53Hz – 40kHz (±1dB), this is the sound that Barefoot enthusiasts have come to know and love.Founded on the idea of creating a new type of audio monitor, Barefoot Sound was started by Thomas Barefoot to meet the growing needs of small to mid-sized project studios. By offering well-designed monitors that could take the space of several sets of speakers, audio enthusiasts are able to have more room for other types of gear, while still having an impeccable monitoring system. The Barefoot Sound MM45 monitors follow in this lineage of incredible speakers like the MicroMain27 and MicroMain35.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM45 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain45′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers.That would be impossible. But the MM45 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM45′s emulation settings.Specifications:Controls:: Input level stepped attenuator, Equalization contourInput Impedance:: 50k OhmFrequency Response:: 40Hz – 45kHz (±3dB),53Hz – 40kHz (±1dB)Bass Response:: -3 dB @ 35Hz, Q = 0.707Slope = 12 dB/octaveCabinet:: 14 liters total internal volume, Sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber wool acoustic damping throughoutCrossover Frequencies:: 600 / 3600 HzTweeter:: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges:: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexSubwoofers:: 8″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 250W HypexAC Power Input:: Nominal 115 VAC or 230 VAC selectablePower Consumption:: Idle: 18W, Maximum: 400WWeight:: Speaker: 37.5 lbs each (17 kg)Shipping: 47 lbs each (21 kg)Dimensions HxWxD:: Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm)Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm) 

Barefoot Sound is proud to introduce the revolutionary new MiniMain12, possibly the most accurate, revealing and technologically advanced recording monitor ever made. This is a bold statement, but the MiniMain12 is an incredibly bold speaker. With vanishing low distortion, breathtakingly wide dynamic range, ultra-fast transient response plus our amazing MEME™(Multi Emphasis Monitor Emulation™) technology. The MiniMain12 is a 4-way active system with 7 drive units housed in sealed enclosures spanning 20Hz to 40kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response.Every driver has an under-hung voice coil moving inside an advanced geometry motor that enables it make extremely long linear excursions. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The aluminum cone subwoofers, woofers and midranges radiate as perfect pistons to at least 2.5 octaves beyond their respective bandwidths.Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage of the MM12. Melding the system together is a groundbreaking DSP crossover that has taken Thomas Barefoot more than 4 years to develop. With beautifully designed high end converts and cutting edge proprietary filtering techniques the MiniMain12 produces such a seamless and coherent wavefront that, if you dare, you can actually listen to this speaker from less than 3 feet away with no sonic compromise. And yes, the MM12 works perfectly out to far field distances as well, producing SPLs equivalent to big mains. If all this weren’t enough, the MiniMain12 brings yet another revolutionary feature into the mix – MEME™(Multi Emphasis Monitor Emulation™) technology. While no other monitor in the world can match the MM12’s linearity and transparency, the MM12 actually has the capability to emulate other speakers! Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space. So why not make the MM12 sound and translate like those speakers as well?With the turn of a knob one can switch from the MiniMain12’s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MiniMain12 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even some of their distortion components. If you know how to work on these speaker you will feel very comfortable working on the MM12’s emulation settings. Specifications:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 20Hz – 50kHz (±3dB),28Hz – 40kHz (±1dB)Bass Response: -3 dB @ 20Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 90 liters total internal volume, Sealed sub enclosure, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout.Crossover Frequencies: 80 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 250W HypexMidranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 250W HypexWoofers: 2 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursionAmplifier: 1200W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 50W, Maximum: 1500WWeight: Speaker: 120 lbs each (54 kg) – no handlesShipping: 135 lbs each (61 kg) – no handlesDimensions HxWxD: 26.0 x 14.4 x 21.9 inches (660 x 366 x 556 mm)​​

Barefoot Sound is proud to introduce the revolutionary new MiniMain12, possibly the most accurate, revealing and technologically advanced recording monitor ever made. This is a bold statement, but the MiniMain12 is an incredibly bold speaker. With vanishing low distortion, breathtakingly wide dynamic range, ultra-fast transient response plus our amazing MEME™(Multi Emphasis Monitor Emulation™) technology. The MiniMain12 is a 4-way active system with 7 Over a decade ago, Thomas Barefoot applied his expertise and experience as an engineer, scientist and inventor in the computer industry to his lifelong passion for music. Approaching the pro audio industry with a fresh pair of eyes, he concluded that every project would benefit from using monitors with the same sound quality, dynamic range and bass extension at each stage of the production process. The innovative reference monitor designs that Thomas subsequently developed not only deliver the same performance and quality from recording through mastering, they also turned the studio monitor speaker business on its head, outperforming many well-established high-end products.The MasterStack12 represents the pinnacle of Thomas’ achievements in monitor speaker design to-date. Barefoot’s flagship reference monitor system is a 4.5-way active modular tower with 10 drive units — a 1-in. ring radiator tweeter, two 2.5-in. mid-range, three 7-in. woofers and four 12-in. subwoofers — housed in two cabinets. A third enclosure houses signal and power distribution and may be optionally used as a decoupling base unit for each tower.What is a 4.5-way system?In a typical 4-way system, subwoofers, woofers, mid-range drivers and tweeters all operate within discrete frequency bands, transitioning from one to the next at the frequencies set in the crossover networks. In the MasterStack12 system, all three woofers work together in the lower frequencies of the band, down to the frequency at which the subwoofers take over. But only two woofers extend up to the mid-range band crossover point. Having three woofers working together in the lower portion of the band offers lower distortion through greater efficiency. At higher frequencies, where the signal becomes increasingly more directional, there is a smooth transition to the wider dispersion pattern created by just two woofers.Four speakers in oneLike all Barefoot monitors, the MasterStack12 features revolutionary MEME™ (Multi-Emphasis Monitor Emulation™) technology, which harnesses sophisticated DSP modeling to mimic the frequency, phase, transient response, dynamic compression and distortion characteristics of various classic nearfield studio monitors. Many people still like to reference their work on old, familiar monitors to check how their mixes will translate or to focus on a specific aspect. But with Barefoot monitors you can put those other reference speakers into storage and free up some space on the console, because one set of MasterStack12 monitors can take the place of three alternate pairs.Using a wired remote you can switch your Barefoot monitors through four different voices and preview your mix as it would sound through three alternate reference speakers, all without moving from the optimum stereo listening position. “Old School” rolls off the extreme highs and lows and brings the mid-range presence forward, capturing the essence of the NS10M. “Cube” is an homage to the classic full-range micro-monitor and is a useful reference setting for any mix that you expect to be played on earbuds through a laptop or handheld device. “HiFi” behaves like a home audiophile speaker, warming up the mid-range and sweetening the highs, for client playback or just listening in the control room. “Flat” selects the true, revealing Barefoot sound.Specifications:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 25k OhmFrequency Response: 18Hz – 50kHz (±3dB)26Hz – 40kHz (±1dB)Bass Response: -3 dB @ 18Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 180 liters total internal volume, Sealed sub enclosures, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout.Crossover Frequencies: 80 / 200 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 250W HypexMidranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 250W HypexWoofers: 3 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursionAmplifier: 500W HypexSubwoofers: 4 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursionAmplifier: 2400W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 100W, Maximum: 1800WWeight: Weight: 280 lbs per tower (127 kg) – no handlesShipping: 325 lbs per tower (147 kg) – no handlesDimensions HxWxD: Cabinet: 63.0 x 14.4 x 21.9 inches (1600 x 366 x 556 mm)Footprint WxD: 23.0 x 21.5 (584 x 546 mm)​​ 

The MicroMain26 is a 4-way active system with 6 drive units housed in sealed enclosures spanning 30Hz to 45kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The 2.5” aluminum cone midrange is housed in a cutting edge 3D printed waveguide enclosure.The 5.25″ woofers feature a phalanx of advanced technology, yielding upper bass and lower midrange detail that rivals any driver on the planet. Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage used in every Barefoot monitor. Melding the system together is a groundbreaking new DSP crossover that took Thomas Barefoot more than 4 years to develop. With beautifully designed high end converters and cutting edge proprietary filtering techniques the MM26 sound stage is seamlessly coherent and deeply revealing.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM26 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain26′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MM26 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM26′s emulation settings.Χαρακτηριστικά:Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice selectInput Impedance: 50k OhmFrequency Response: 30Hz – 45kHz (±3dB)40Hz – 40kHz (±1dB)Bass Response: -3 dB @ 30Hz, Q = 0.707Slope = 12 dB/octaveCabinet: 32 liters total internal volume, Sealed subwoofer, woofer and mid enclosures, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughoutCrossover Frequencies: 100 / 800 / 4000 HzTweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges: 2.5″ aluminum cone, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexWoofers: 2 x 5.25″ poly/paper cone, Advanced geometry neodymium motor, +/- 5 mm linear excursionAmplifier: 250W HypexSubwoofers: 2 x 10″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 500W HypexAC Power Input: Nominal 115 VAC or 230 VAC selectablePower Consumption: Idle: 30W, Maximum: 650WWeight: Weight: Speaker: 71 lbs each (32 kg)Shipping: 83 lbs each (38 kg)Dimensions HxWxD: Dimensions HxWxD: Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm)Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm) 

The MicroMain27 Gen2 is a 3.5-way active system with 5 drive units housed in sealed enclosures spanning 30Hz to 45kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The new 5.25″ midbass features a phalanx of advanced technology, yielding midrange detail that rivals any driver on the planet. Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage of the MM27 Gen2. Melding the system together is a groundbreaking new DSP crossover that has taken Thomas Barefoot more than 4 years to develop. With beautifully designed high end converts and cutting edge proprietary filtering techniques the MM27 Gen2 sound stage is seamlessly coherent and deeply revealing. MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space. The solution is to make the MM27 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain27′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers. That would be impossible. But the MM27 Gen2 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM27′s emulation settings.  MicroMain27 Gen2 features: 3.5-way active studio monitor with integral subwoofers Four-setting DSP voice emulation Analog and AES3 digital inputs Hypex amplification Tweeter - 1" ring radiator with Advanced neodymium motor Rear waveguide chamber. Amplifier: 250W Hypex Midbass 1 - 5.25" poly/paper cone with Advanced neodymium motor , with +/- 5 mm linear excursion. Amplifier: 250W Hypex Midbass 2 - 5.25" poly/paper cone with Advanced neodymium motor, with +/- 5 mm linear excursion. Amplifier: 250W Hypex Subwoofers - 2 x 10" aluminum cone with high linearity motor, with +/- 13 mm linear excursion. Amplifier: 500W Hypex Crossover Frequencies: 100 / 600 / 3000 Hz Cabinet Dimensions: 20.5" x 9.5" x 15.5" Overall Dimensions: 20.5" x 10.4" x. 17.4"