Van Den Hul

Excellent turntable - phono connection cable with WBT plugsThe WAVE is a coaxial, triple shielded interconnect designed to simply outperform its price class with superior qualities.Being not just any other "coax cable", The WAVE's finely balanced design and materials inside comprise more than 25 years of experience and material knowledge, resulting into impeccable transmission quality.Another strong aspect of The WAVE is that its high natural bandwidth and excellent noise rejection properties make it applicable in a wide variation of audio as well as 75 Ohm video interconnect situations. TECHNICAL SPECIFICATIONS:Conductor Material:Dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Multi-purpose AV interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 0.64 mm². / AWG 19 / Core: 1; Screen: 96 + Al foil + 112External Diameter /-Dimensions:7.3 mm.Resistance 20 °C / 68 °F:Core: 2.7 Ohm/100 m.; Screen: 0.55 Ohm/100 m.Capacitance:57 pF/m.Characteristic Impedance:75 OhmInsulation / Dielectric Strength / Test Voltage:Core: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Special version of our RCA type C - 7.3; Our BNC type BNC - 7.0; Television style coaxial plugs; Custom mountable on ordered lengths. 

DIY SCREW-ON SPEAKER CONNECTORS 4 PCS Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away. 24 carat gold plated, screw-on, solderless connectors  Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification  Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter    The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance.  The high pressure clamping ensures low loss electrical connection and maximum signal transfer  Spades terminal (standard Ø4 mm pin)  Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm.  Easy assembly instructions (4 steps):  Strip off 14mm of the multi-strand cable/wire jacket Insert the stripped end through the screw-on collar Fan out the strands and evenly fold them encircling the collar Insert the banana pin/spade blade and screw-on to the collar

The NAME is ideal for use as audio interconnect in any situation, like wiring your home theater setup or going from CD player to amplifier.Sheer sound quality!Due to its accurate 75 Ohm standard transmission at high frequencies, The NAME however is also perfect in AV applications like antenna/cable TV, video, surround and S/PDIF digital audio connections. Trouble free and lasting high performance!  TECHNICAL SPECIFICATIONS:Conductor Material:Dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Multi-purpose AV interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 0.950 mm². / AWG 17.4 / Core: 1; Screen: Al foil + 120External Diameter /-Dimensions:7.3 mm.Resistance 20 °C / 68 °F:Core: 1.87 Ohm/100 m.; Screen: 0.949 Ohm/100 m.Capacitance:59 pF/m.Characteristic Impedance:75 Ohm 

This mat black HULLIFLEX ® jacketed balanced cable was designed to support the tone-arm and mixing console industry: very flexible and with extremely good electrical qualities.The D - 501 SILVER HYBRID is a cable with a very high shielding factor. Sonically this is one of the best cables in our program. The D - 501 SILVER HYBRID is regularly used as a microphone cable in critical professional recordings and as a special product for SME in England together with their prestigious tonearms which on customer request can be fit with this silver version of the D - 501 HYBRID.The 2 signal lines are made each of 19 x 0.1 mm. highest grade Matched Crystal Silver strands. The signal line insulation with the colours white and red is made of cell-PE, so the stripping can even be done with your fingernails to prevent damage of the silver strands commonly caused by mechanical stripping. The resistance per signal lead is: 11.9 Ohm/100 meter.The capacitance between the 2 signal leads is a very low 58 pF/meter. The hybrid shielding consists of a dense and very pure silver coated high grade Matched Crystal (MC) OFC 72 x 0.1 mm. wire helix with underneath a Linear Structured Carbon ® (LSC) saturated conductive sub-jacket.  *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:Cores: Highest grade Matched Crystal Silver.HYBRID Shield: High purity dense Silver coated high grade Matched Crystal (MC) OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Tonearm and mixing console / tonearm to preamp, microphone and interlink cableEff. Conductor Ø/Eq. AWG No./Strands:Cores: 0.15 mm² / Cores: AWG 25.4 / Cores: 19; Screen: 72External Diameter /-Dimensions:4.0 mm.Resistance 20 °C / 68 °F:Cores: 11.9 Ohm/100 m.; Screen: 3.2 Ohm/100 mCapacitance:Core-core: 58 pF/m.Insulation / Dielectric Strength / Test Voltage:Cores: Cell PE; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Our RCA type C - 4.0; Our tonearm connector; Neutrik XLR; Neutrik 1/4" (6.3 mm.) Jack/Phone plug; Custom mountable on ordered lengths. 

Being the first member of our new state of the art FUSION SERIES of audio interconnects and loudspeaker cables The INTEGRATION HYBRID is a triple shielded quadruple core audio interconnect suitable for both balanced and unbalanced use.Having integrated all our experience, knowledge and technology into this first “FUSION SERIES” cable, it seemed quite logical to call it: “The INTEGRATION HYBRID”.As with all products under our FUSION SERIES, in The INTEGRATION HYBRID our new developed highly advanced FUSION conductor material is combined together with our well proven Linear Structured Carbon ® technology. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Triple screened quadruple core / star quad (Balanced)Conductor Material:FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Balanced and unbalanced audio interconnect; Microphone and musical instrument cableEff. Conductor Ø/Eq. AWG No./Strands:Cores: 0.16 mm² / Cores: ~AWG 25 / Cores: 7; Screen: 180External Diameter /-Dimensions:7.8 mm.Resistance 20 °C / 68 °F:Cores: 0.43 Ohm/m.; Screen: 0.62 Ohm/100 m.Capacitance:86 pF/m. (in balanced star quad mode)Characteristic Impedance:~110 Ohm (in balanced star quad mode); Allows AES-EBU standard digital audio transmissionInsulation / Dielectric Strength / Test Voltage:Cores: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Our RCA type C - 8.0; Neutrik XLR; Neutrik 1/4" (6.3 mm.) Jack/Phone plug; Custom mountable on ordered lengths. 

The NAME is ideal for use as audio interconnect in any situation, like wiring your home theater setup or going from CD player to amplifier.Sheer sound quality!Due to its accurate 75 Ohm standard transmission at high frequencies, The NAME however is also perfect in AV applications like antenna/cable TV, video, surround and S/PDIF digital audio connections. Trouble free and lasting high performance!  TECHNICAL SPECIFICATIONS:Conductor Material:Dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Multi-purpose AV interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 0.950 mm². / AWG 17.4 / Core: 1; Screen: Al foil + 120External Diameter /-Dimensions:7.3 mm.Resistance 20 °C / 68 °F:Core: 1.87 Ohm/100 m.; Screen: 0.949 Ohm/100 m.Capacitance:59 pF/m.Characteristic Impedance:75 Ohm 

We are pleased to introduce the Van den Hul OPTOCOUPLER Mk II.With The OPTOCOUPLER Mk II we are convinced to have one of the best optical fiber cables available on the audio and video market.The most important benefits of optical signal transmission are obvious; Never any noise or interference caused by external electrical and/or magnetic signals, and optical fibres are free from any deterioration.What makes the Van den Hul OPTOCOUPLER Mk II special is the fact that both ends of the single fiber are shaped in the form of a convex (spherical) lens. TECHNICAL SPECIFICATIONS:Cable Type:Optical fiberDesign Purpose/Application Area(s):High bandwidth, low-loss and low jitter optical digital audio and video interconnectExternal Diameter /-Dimensions:7.5 mm. Remarks:Additional Specifications:Application Wavelength: 650 nmTransmission Capacity: > 250 Megabit/sAttenuation: < 0.20 dB/mInsertion Loss: 0.15 dBConnectors need to be factory mounted 

Sonically the D - 502 HYBRID is one of our best products at a very affordable price. Its conductors’ combined quantity of silver and Linear Structured Carbon ®(LSC) are the best option available.The D - 502 HYBRID’s sound quality is extremely detailed without any metallic character.The D - 502 HYBRID is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Twin line (Figure of 8), screened twin core (Balanced)Conductor Material:HYBRID: High purity dense Silver coated high purity OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Tonearm and mixing console / tonearm to preamp, microphone and interlink cableEff. Conductor Ø/Eq. AWG No./Strands:Cores: 0.15 mm² / Cores: AWG 25.4 / Cores: 19; Screen: 96External Diameter /-Dimensions:8.4 mm. wide; 4.0 mm. thickResistance 20 °C / 68 °F:Cores: 11.3 Ohm/100 m.; Screen: 2.3 Ohm/100 m.Capacitance:Core-core: 75 pF/m.Insulation / Dielectric Strength / Test Voltage:Cores: Cell PE; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Our RCA type C - 4.0; Our tonearm connector; Neutrik XLR; Neutrik 1/4" (6.3 mm.) Jack/Phone plug; Custom mountable on ordered lengths. 

We are pleased to introduce the Van den Hul OPTOCOUPLER Mk II.With The OPTOCOUPLER Mk II we are convinced to have one of the best optical fiber cables available on the audio and video market.The most important benefits of optical signal transmission are obvious; Never any noise or interference caused by external electrical and/or magnetic signals, and optical fibres are free from any deterioration.What makes the Van den Hul OPTOCOUPLER Mk II special is the fact that both ends of the single fiber are shaped in the form of a convex (spherical) lens. TECHNICAL SPECIFICATIONS:Cable Type:Optical fiberDesign Purpose/Application Area(s):High bandwidth, low-loss and low jitter optical digital audio and video interconnectExternal Diameter /-Dimensions:7.5 mm. Remarks:Additional Specifications:Application Wavelength: 650 nmTransmission Capacity: > 250 Megabit/sAttenuation: < 0.20 dB/mInsertion Loss: 0.15 dBConnectors need to be factory mounted 

Low priced and exhibiting an excellent price-to-performance ratio The BAY C5 HYBRID has been specially designed for general purpose and car hi-fi interlink applications.The BAY C5 HYBRID however is also perfectly suited for internal (pre)amplifier and mixing console wiring applications and as an unbalanced patchbay interconnect.The design combination of a superior transmission quality, a low conductor-conductor capacitance, a very high screening factor together with a high mechanical flexibility and a long durability, though not being easy to manage, successfully has been achieved.The high quality conductor material used in this cable is large crystal OFC with a dense silver coating. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: Large Crystal OFC with a dense Silver coating + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):General purpose and car hi-fi interlink / Internal (pre)amplifier and mixing console wiring / Unbalanced patchbay interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 0.452 mm² / Core: AWG 20.6 / Core: 40; Screen: 96External Diameter /-Dimensions:5.2 mm.Resistance 20 °C / 68 °F:Core: 3.8 Ohm/100 m.; Screen: 1.6 Ohm/100 m.Capacitance:110 pF/m.Insulation / Dielectric Strength / Test Voltage:Core: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Our RCA type C - 5.5; Neutrik 4.4 mm., 3-pole Bantam (TT) patchbay plug; Custom mountable on ordered lengths. 

The D - 102 III HYBRID is a warm yellow-orange coloured very flexible balanced interconnect with a 3 layer shielding.The 2 centre conductors are made of 40 dense and very pure silver coated strands made of a very high grade Matched Crystal (MC) OFC. Over each centre conductor an extra Linear Structured Carbon ® (LSC) saturated layer is applied.This extra layer of LSC highly improves the quality of the signal transmission by performing electrical bridging on micro-scale and by converting the external magnetic field close to the conductors into an electrical signal again. The resistance of each centre conductor is 5.5 Ohm/100 meter. The capacitance between the 2 internal conductors is a very low 37 pF/meter; so in balanced operation, even in rather high impedant circuitry, the overall losses and/or phase-shift remain very low.In unbalanced operation the two internal conductors can simply be taken together with the shield acting as the signal return, though the better and preferred layout (which we apply) has the shield only connected to signal ground at the signal source side (marked by a ground-end marking sticker) and one of the internal conductors functions as signal return. The insulation of the two centre conductors is made of polyethylene foam; one in white, the other in brown. *Price per meter,not terminated.Call/email us for termination cost.  TECHNICAL SPECIFICATIONS:Cable Type:Triple screened twin core (Balanced)Conductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ®saturated layer(s)Design Purpose/Application Area(s):Balanced and unbalanced audio interconnectEff. Conductor Ø/Eq. AWG No./Strands:Cores: 0.31 mm² / Cores: ~AWG 22 / Cores: 40; Screen: 180External Diameter /-Dimensions:7.25 mm.Resistance 20 °C / 68 °F:Cores: 5.5 Ohm/100 m.; Screen: 0.62 Ohm/100 m.Capacitance:Core-core: 37 pF/m.Characteristic Impedance:~110 Ohm (in balanced configuration); Allows AES-EBU standard digital audio transmissionInsulation / Dielectric Strength / Test Voltage:Cores: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Our RCA type C - 7.3 or Neutrik XLR; Custom mountable on ordered lengths. 

The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.​materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.

The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.​materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.

The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.​materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.

The WAVE is a coaxial, triple shielded interconnect designed to simply outperform its price class with superior qualities.Being not just any other "coax cable", The WAVE&#39;s finely balanced design and materials inside comprise more than 25 years of experience and material knowledge, resulting into impeccable transmission quality.Another strong aspect of The WAVE is that its high natural bandwidth and excellent noise rejection properties make it applicable in a wide variation of audio as well as 75 Ohm video interconnect situations. TECHNICAL SPECIFICATIONS:Conductor Material:Dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Multi-purpose AV interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 0.64 mm². / AWG 19 / Core: 1; Screen: 96 + Al foil + 112External Diameter /-Dimensions:7.3 mm.Resistance 20 °C / 68 °F:Core: 2.7 Ohm/100 m.; Screen: 0.55 Ohm/100 m.Capacitance:57 pF/m.Characteristic Impedance:75 OhmInsulation / Dielectric Strength / Test Voltage:Core: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.Connector Types Suitable:Special version of our RCA type C - 7.3; Our BNC type BNC - 7.0; Television style coaxial plugs; Custom mountable on ordered lengths. 

DIY SCREW-ON SPEAKER CONNECTORS 4 PCSVersatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away.24 carat gold plated, screw-on, solderless connectors Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter   The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance. The high pressure clamping ensures low loss electrical connection and maximum signal transfer Banana terminal (standard Ø4 mm pin) Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm. Easy assembly instructions (4 steps): Strip off 14mm of the multi-strand cable/wire jacketInsert the stripped end through the screw-on collarFan out the strands and evenly fold them encircling the collarInsert the banana pin/spade blade and screw-on to the collar

The CLEARWATER is especially intended for use as a twin line loudspeaker cable in areas with an increased corrosion activity such as industrial, coastal and humid tropical areas. Due to its maximum corrosion protection The CLEARWATER is excellently suited for use in permanent professional, commercial and industrial distribution setups such as church sound systems and shopping mall, airport and alike music distribution systems as well as in car hi-fi applications.Both leads each consist of 98 high purity dense Silver coated high purity Matched Crystal OFC strands with an effective cross-section area of 1.97 mm² closely approaching AWG 14. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:16.6 mm. wide; 5.0 mm. thickResistance 20 °C / 68 °F:0.9 Ohm/100 m.Capacitance:22 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® / 300 Vrms min. 

 This twin lead loudspeaker cable is the twin version of the CS - 12 HF. Main aim is to provide a high quality flat twin lead cable at a low price.The 2 conductors are made of 147 strands of 0.16 mm. diameter high purity Matched Crystal OFC with a very dense pure silver coating. Each conductor exhibits a cross-section area of 2.96 mm², equalling AWG 12.5.Covering the two conductors you find an extra Linear Structured Carbon ® saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again.The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.The insulation of the plus and minus leads is different in shape with printing in the flat middle section. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.96 mm² / AWG 12.5 / 147)External Diameter /-Dimensions:16.5 mm. wide; 6.0 mm. thickResistance 20 °C / 68 °F:0.58 Ohm/100 m.Capacitance:32 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min. 

The GOLDWATER is especially intended for use as a twin line loudspeaker cable in areas with an increased corrosion activity such as industrial, coastal and humid tropical areas. Due to its maximum corrosion protection The GOLDWATER is excellently suited for use in permanent professional, commercial and industrial distribution setups such as church sound systems and shopping mall, airport and alike music distribution systems as well as in car hi-fi applications.Both leads each consist of 98 high purity dense Silver coated high purity Matched Crystal OFC strands with an effective cross-section area of 1.97 mm² closely approaching AWG 14. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:16.6 mm. wide; 5.0 mm. thickResistance 20 °C / 68 °F:0.9 Ohm/100 m.Capacitance:22 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® / 300 Vrms min. 

The INSPIRATION HYBRID is a new product in our state of the art FUSION SERIES of audio interconnects and loudspeaker cables which incorporate our new developed highly advanced FUSION conductor material.It’s main application area is to serve as a highest quality twin lead loudspeaker cable, though it equally exels when used for bi-wiring, bi-amping.INSPIRATION HYBRID’s design incorporates a number of unique features which widen its field of application and improve performance compared to regular twin lead loudspeaker cables:The cable is equipped with a heavy shield.The signal leads are placed in a so-called star quad configuration.The cable contains a separate central ground lead which, if applicable,is intended to serve as ground connection between loudspeaker cabinet and amplifier ground.The above mentioned design features avoid possible audio signal interference caused by external electromagnetic noise radiating into your power amplifier’s signal (feedback) path, entering through the loudspeaker lines.Furthermore, when using digital (switchmode) power amplifiers, any radiation of residual noise from the loudspeaker lines is prevented.As such, these measures help to keep your system’s noise floor down, thereby allowing it to reveal more detail. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Screened 5 conductorConductor Material:FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Each signal lead: 1.97 mm² / ~AWG 14 / 98Ground lead: 0.56 mm² / AWG 19.6 / 7Screen: 4.45 mm² / AWG 10.7 / 252External Diameter /-Dimensions:11.5 mm.Resistance 20 °C / 68 °F:Two red or blue signal leads combined: 1.4 Ohm/100 m.Central ground lead: 3.2 Ohm/100 m.Screen: 0.45 Ohm/100 m.Capacitance:318 pF/m.Insulation / Dielectric Strength / Test Voltage:Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min. 

The main idea behind this concept is that a pure metal conductor is a wonderful collection and compilation of crystals where the inter-crystal relations are not perfectly arranged.In our The REVELATION HYBRID the bridging factor between these crystals is the thick conductive Linear Structured Carbon ® (LSC) saturated layer covering the centre conductor.Due to the special properties of this LSC saturated coating, the sonic improvements are remarkable. Especially the very fine details of a recording and the spatial information are transmitted without the slightest harshness.All metal strands used in The REVELATION HYBRID are of a very high grade Matched Crystal (MC) OFC with a thick and very dense coating of pure silver.The centre conductor is made of 294 single strands each 0.15 mm. in diameter exhibiting a total cross-section area of 5.20 mm² and a low resistance of 0.332 Ohm/100 meter.The LSC saturated layer covering the centre group is extruded under very high pressure to ensure a good bridging contact.The total diameter of this combined group is 7.50 mm.Around this core 16 helically wound conductors are applied. These 16 outer conductors are individually insulated and are standardly wired in parallel with the centre conductor, giving a single lead cable. Their being individually insulated however also allows them to be wired together as a separate signal return. (Versions wired as such and fit with matching connectors are available either as twin-lead speaker cable or as single-ended interconnect on special customer demand).Each of these 16 conductors consists of 42 strands of 0.15 mm. diameter. These 16 conductors exhibit a combined cross-section area of 11.88 mm² and a combined resistance of just 0.145 Ohm/100 meter.The core combined with these 16 conductors in parallel give The REVELATION HYBRID its very low resistance of 1 Ohm/km.The outer insulation jacket is made of red HULLIFLEX ® 3, a mechanically superb insulation material.The external diameter is 12.5 mm.*Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:HYBRID: Both centre conductor and outer groups: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 5.20 mm².; Outer groups combined: 11.88 mm².; Total: 17.07 mm². / Total: ~AWG 5 / Core: 294; Outer 16 groups each: 42External Diameter /-Dimensions:12.5 mm.Resistance 20 °C / 68 °F:Core: 0.332 Ohm/100 m.; Outer groups combined: 0.145 Ohm/100 m.; Both parallel: 0.101 Ohm/100 m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min. 

The SCS - 2 for certain is the very best PTFE insulated pure metal loudspeaker line available in the world.The size is 2 gauge with 665 strands and a conductor cross-section area of 33.9 mm².Ext. diam. is: 9.70 mm.The resistance is an extremely low 0.51 Ohm/km.Each strand is made of a very high grade Matched Crystal (MC) OFC covered with a dense and very pure silver coating in an extrusion process.The SCS - 2 is available on 50 meter reels or in any specified length with beige PTFE jacket with “ van den Hul SCS - 2 ” printing in a brown colour. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:33.9 mm² / AWG 2 / 665External Diameter /-Dimensions:9.70 mm.Resistance 20 °C / 68 °F:0.51 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms 

The SCS - 4 comes very close to the sonic qualities of the SCS - 2. The size is 4 gauge with 133 strands and a total conductor cross-section area of 21.6 mm².The external diameter is 8.10 mm.The resistance is a remarkably low 0.80 Ohm/km.Each strand is made of a very high grade Matched Crystal (MC) OFC with a dense and very pure silver coating in an extrusion process.The jacket of the SCS - 4 is made of beige PTFE with “ van den Hul SCS - 4 ” printing in brown colour. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:21.6 mm² / ~AWG 4 / 133External Diameter /-Dimensions:8.10 mm.Resistance 20 °C / 68 °F:0.80 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms 

The SCS - 6 comes very close to the sonic qualities of the SCS - 4.The size is 6 gauge with 133 strands.Each strand is made of a very high grade Matched Crystal (MC) OFC with a dense and very pure silver coating in an extrusion process.The jacket of the SCS - 6 is made of beige PTFE with “ van den Hul SCS - 6 ” printing in brown.The tonal quality is extremely good. Especially its smooth high frequency reproduction is reference quality. This is the direct result of the special production methods involved. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:13.5 mm² / ~AWG 6 / 133External Diameter /-Dimensions:6.35 mm.Resistance 20 °C / 68 °F:1.3 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms 

 The SNOWLINE is made of 2 conductor groups, each with 98 x 0.16 mm. strands. The total cross-section area per conductor is 1.97 mm²; close to AWG 14. The conductor material is a very high grade large crystal OFC with a dense pure silver coating. The resistance per lead is 0.88 Ohm/100 meter. The external dimensions are 8.5 x 3.4 mm. The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. The two conductors have different insulator shapes: one is round and the other has two edges with type printing on the flat surface: the most simple polarity finder you can think of. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity OFCDesign Purpose/Application Area(s):Loudspeaker cable / Car and general hi-fi applicationsEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.88 Ohm/100 m.Capacitance:69 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min. 

 The general construction is the same as with The REVELATION HYBRID:First an inner group with 308 x 0.14 mm. very high grade Matched Crystal (MC) OFC strands with a dense coating of very pure silver. The inner group exhibits a total metal cross-section area of 4.74 mm².Covering this core is a Linear Structured Carbon ® (LSC) saturated layer which bridges minor defects and captures and transforms the radiated magnetic field of the inner conductor to an audio signal again.The helically wound outer conductor structure employs the same silver coated MC OFC metal quality as found in the core and consists of 16 separate conductors, each with 19 strands of 0.11 mm. This produces a metal cross-section area of 2.89 mm². These 16 outer conductors are individually insulated and are standardly wired in parallel with the centre conductor, giving a single lead cable. Their being individually insulated however also allows them to be wired together as a separate signal return. (Versions wired as such and fit with matching connectors are available either as twin-lead speaker cable or as single-ended interconnect on special customer demand).The total metal cross-section area of The REVOLUTION HYBRID is 7.63 mm² giving the cable its very low resistance of 0.226 Ohm/100 m.The outer jacket is made of red HULLIFLEX ® 3, a mechanically superb insulation material. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:HYBRID: Both centre conductor and outer groups: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 4.74 mm²; Outer groups combined: 2.89 mm²; Total: 7.63 mm² / Total: AWG 8.4 / Core: 308; Outer 16 groups each: 19External Diameter /-Dimensions:8.0 mm.Resistance 20 °C / 68 °F:Core: 0.364 Ohm/100 m.; Outer groups combined: 0.597 Ohm/100 m.; Both parallel: 0.226 Ohm/100 m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min. 

 The WIND Mk II HYBRID consists of a total of 173 single non insulated strands in 5 different layers with a total cross-section area of 4.67 mm² equalling AWG 10.5.To improve the overall transmission quality even more, we have coated the total metal construction with a Linear Structured Carbon ® saturated layer.This extra item dramatically improves the sound quality.The sonic result is a very detailed signal transmission with a superb spacious character.The resistance of The WIND Mk II HYBRID is 3.7 Ohm/km. The external diameter is 6.2 mm.The peach colored jacket is made of HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.Before connecting The WIND Mk II HYBRID to your equipment we advise to mildly twist both leads to keep them together. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality level loudspeaker cable / External and internal (re)wiringEff. Conductor Ø/Eq. AWG No./Strands:4.67 mm² / AWG 10.5 / 173External Diameter /-Dimensions:6.2 mm.Resistance 20 °C / 68 °F:3.7 Ohm/km.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min. 

 This twin lead brown metallic coloured speaker cable is designed to provide a very high transfer quality at a moderate price.Each lead is made of 296 x 0.15 mm. Matched Crystal (MC) high purity OFC strands with a dense and very pure silver coating.Covering the two conductors an extra layer saturated with Linear Structured Carbon ® is applied to improve the sonic performance and to transform the radiated magnetic field into an audio signal again.The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.The resistance per lead is: 0.34 Ohm/100 meter.Total metal cross-section area for each conductor is 5.23 mm², equalling AWG 10. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Twin conductorConductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(5.23 mm² / AWG 10 / 296)External Diameter /-Dimensions:21.0 mm. wide; 6.5 mm. thickResistance 20 °C / 68 °F:0.34 Ohm/100 m.Capacitance:32.5 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min. 

The SKYLINE HYBRID is an elegant small twin conductor loudspeaker cable with outstanding qualities.Each lead combines 19 high purity Oxygen Free Copper strands with a coating containing our Linear Structured Carbon ®This combination of metal and carbon (hybrid technology) has excellent properties when it comes to resolution and neutrality, and therefore is standard applied in all of our heavier loudspeaker cables. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity OFC + Linear Structured Carbon ®saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.04 mm² / ~AWG 14 / 19)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.84 Ohm/100 m.Capacitance:46 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.