iFi Audio

It’s head-fi. It’s desk-fi. And it’s hi-fi.The NEO iDSD 2 is our versatile new 3-in-1 DAC/Amp, designed specifically for CAS audiophiles. It pairs effortlessly with your headphones as a Head-Fi DAC/Amp, can be used as a pure DAC with your integrated amplifier, or serve as a DAC/Preamp for your active speakers and power amplifier.It features the latest Bluetooth 5.4, supporting the new aptX Lossless, the only Bluetooth codec capable of streaming lossless CD-quality audio without sacrificing audio quality.The NEO iDSD 2 has improved headphone and line outputs, providing ample power for your high-demanding headphones, as well as power amplifiers.My Blue isn’t your blue. It’s new and Lossless.The NEO iDSD 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDACTM offers a higher bitrate of 990kbps.However, aptX Lossless is the first and only Bluetooth codec capable of streaming CD-quality audio without using a compression method that degrades sound quality. While other Bluetooth codecs claim to support CD-quality and even hi-res audio, they employ lossy compression during transmission, which negatively affects sound quality.The NEO iDSD 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDACTM, LHDC/HWA, AAC and SBC.*As of 22 Sep 2023. Check your device for Bluetooth codec support.**LDAC and LDAC logo are trademarks of Sony Corporation.5x more headphone output power than its predecessor.You heard me correctly – the headphone output power of the NEO iDSD 2 is a whopping 5 times more powerful than that of the 1st-gen NEO iDSD. With a maximum headphone output power of 5,551 mW (@ 32Ω), it outperforms even some dedicated headphone amplifiers, making them sweat. The headphone section has seen significant improvement, as we’ve essentially integrated a Diablo headphone circuit into it.It features Auto iEMatch to reduce annoying hiss from high-sensitivity headphones without losing any dynamic range and four gain settings ranging from -12dB to +16dB, making it suitable for all your IEMs and headphone types, from super-sensitive to power-hungry.The NEO iDSD 2 is not only a powerhouse, but it’s also tailored for your ears. The newly added analogue processing modes, XSpace and XBass II, along with the four digital filters, allow you to finetune the sound. Both XSpace and XBass II are pure analogue signal processing modes designed to adjust the soundstage and low-frequency response to match your headphones.Stand by you. No matter up or down.Whether you’re using the NEO iDSD 2 as a Desk-Fi or Hi-Fi, you can position it horizontally or vertically. The new 2-inch colour display automatically rotates to suit the orientation.When using it as a Desk-Fi, you can position it vertically on your desk to save space. Set it to variable output, and with its powerful 19.5V maximum balanced output, it works well with your active speakers with volume control. The volume control is analogue, which is superior to any digital volume control.When using the NEO iDSD 2 as a Hi-Fi, you can place it horizontally. It can serve as a pure DAC, playing all Hi-Res music files from PCM 32-bit/768kHz to DSD512 and full MQA decoding. You can also connect it directly to your power amplifier as a preamplifier, utilising its analogue volume control.GMT Femto-Precision Clock. Upgradable.The internal GMT femto-precision clock, combined with a smart storage cache, forms an advanced jitter reduction system. It effectively reduces jitter in the digital signal, producing cleaner and more accurate sound.If you possess a more accurate external clock, or if you wish to synchronize with other devices such as CD players or network streamers that have an external clock input, you can connect both the NEO iDSD 2 and the other devices to the external clock via the 10MHz External Sync Clock input for even greater clock signal accuracy.It’s rare to find an External Sync Clock input in this price range. Even if you don’t have an external clock, the internal GMT femto-precision clock still offers excellent performance in its class.More than new features. Enhanced circuitry.The NEO iDSD 2’s enhanced PureWave circuit design, with its balanced dual-mono topology and short signal paths, is known for outstanding linearity and minimal noise and distortion, offering you exceptional sonic purity.The results are an improved Signal-to-Noise Ratio (SNR) of >120dB(A), Dynamic Range (DNR) of -120dB(A), and Total Harmonic Distortion plus Noise (THD+N) of

Stacked. With tech.
The Pro iDSD Signature uses a quad-stack DAC – 4 x DACs in an interleaved configuration – to deliver exceptional resolution.The powerful XMOS XU216 X-Core 200 series chipset processes incoming digital data and enables the Pro iDSD Signature to provide state of the art audio support – from MP3, 32-bit/768kHz PCM, DSD512, 2xDXD and full MQA decoding.Thanks to the Crysopeia FPGA Digital Engine the Pro iDSD Signature brings studio grade DSD remastering to a wider audience. It can upconvert PCM and DSD files to DSD512 and DSD1024. And all controlled from an app in the palm of your hand.E-tailoring
The Pro iDSD Signature, like its predecessor, takes sonic tailoring to the extreme.Listen to the your music to in solid-state, tube or tube+ modes, your choice, all at the flick of a switch.Our Crysopeia FPGA Digital Engine strikes again as it enables the Pro iDSD Signature to offer several options when it comes to digital filtering. The GTO filter adds gravitas and a new dimension, and while the Bit Perfect, Bit Perfect+, Apodising and Transient Aligned filters give you even more choices to tweak the sound. The discrete, fully balanced Class A amplifier stage offers adjustable gain. Your choice. The only choice.Stream wirelessly from Tidal, Spotify, Napster, QQ Music and more
Use Airplay to enjoy playback from your iPhone, iPad or Mac
Go wired via an Ethernet connection to play from a router or NAS (Network Attached Storage)
Use DLNA network audio playback with smartphones, tablets, Windows/Linux computers
Connect to a hard disc drive (HDD)
Pop in a USB memory stick or SDHC card
And with a variety of headphone outputs – Single-Ended 6.3mm, S-Balanced 3.5mm and Balanced 4.4mm – the only choice is your choice.Power cleans. Absolute.
The Pro iDSD Signature ships with our flagship iPower Elite.Coupled with the re-crafted power supply board which offers up to 300x lower noise, the music is buttery smooth.Within and without – we left no stone unturned in our quest for the cleanest, purest, power for the Pro iDSD Signature (same for Pro iCAN Signature too!)

Sweet streams…The NEO Stream is built to deliver optimal versatility and sonic performance. It combines the latest version of our network streaming engine with our award-winning DAC stage to deliver a level of audio previously unattainable. Just add your choice of amp and speakers.Adds streaming capability to your cherished systemSonically upgrades your existing streamerThe only streamer you will ever needDistinctly different. Digitally disruptive.Our use of proprietary tech makes the NEO Stream distinctly different.No ‘bought-in’ platform. No specific control app.Our own streaming engine. Fully optimised for seamless operation and excellent sonic performance.Functionally and sonically, it’s the ideal streamer for passionate music lovers who want to experience their music with exceptional sound quality through their own choice of control app or music platform. Without the exorbitant price tag.Simply seamless streamingRoon Ready – Roon Ready certification means the NEO Stream slots straight into a Roon audio environment and works seamlessly with Roon software.DNLA/UPnP – Use your choice of any DLNA/UPnP compatible app – BubbleUpnP, connect, Audirvana and so on – to control the NEO Stream and access audio content from online services.Tidal Connect and Spotify Connect – Stream straight from these integrated online music services.Apple Airplay 2 – Easy streaming from Apple devices.NAA operation – Serious enthusiast? The NEO Stream can operate as a Network Audio Adapter. It directs packets of audio data received over Wi-Fi or Ethernet cable straight to the connected DAC without applying processing.NAS drive – stream from a local storage device using the ‘Stream-iFi’ app.Custom DACThe NEO Stream’s integral DAC stage takes your streaming enjoyment to another level.Four-channel True Native hi-res DAC design – supports PCM 768kHz and DSD 512,Powerful 16-core XMOS processor – performs full MQA decoding (to 384kHz)Thanks to the DAC chip’s four-channel True Native design, PCM and DSD take separate pathways and remain ‘bit-perfect’ in their direct-native form, right through to analogue conversion. In the case of DSD, there is no conversion to PCM or application of multi-bit processing – this is unusual and makes the NEO Stream an excellent choice for DSD purists.Coveted connectionsInputsDual-band Wi-Fi reception (2.4GHz and 5GHz) with 802.11a/b/g/n/ac supportGigabit Ethernet (LAN) – 1x RJ45; 1x M12; 1x Optical LAN (see below for more information)2x USB-A (USB2.0 and SuperSpeed USB3.0 supported)1x USB-C system update port (OTA – Over The Air – updates also available)OutputsAnalogue – 1x stereo RCA; 1x 4.4mm balancedUltra-res digital (PCM 768kHz, DSD512) – 1x HDMI-I2S; 1x USB-A (USB3.0)Hi-res S/PDIF digital (PCM 192kHz) – 1x optical; 1x coaxial; 1x AES/EBUUnique optical LANConnecting to your network router via cable rather than relying on Wi-Fi? The NEO Stream includes a unique option alongside its RJ45 and M12 ports – optical LAN. This is our own technology. Connect the OptiBox transceiver to the router, and the NEO Stream to the OptiBox via an optical cable. Both the OptiBox and cable are included.Benefit from the highest quality digital audio connection possible between the router and the streamer.Ultra-fast data speeds of up to 10GbpsBit-perfect transmission of ultra-resolution audioMinimal degradation across distances of up to 1kmThe LAN signal from the router is regenerated, reclocked and rebalanced by the OptiBox; true galvanic isolation is applied, with zero parasitic capacitance and inductance.Suits you, sirSeveral different settings allow users to tailor the NEO Stream’s performance to suit their system and the way they like to stream.Exclusive Modes are individual settings that optimise performance by focusing operation on one mode of use. There are specific settings for Roon, Tidal Masters, DLNA and NAA, as well as a general mode for multi-platform use.Four user-selectable digital filters, each of which has a subtle but clearly discernible effect on sound, can be switched according to personal taste and music choice:Bit-PerfectGTO (Gibbs Transient Optimised)Minimum PhaseStandardCome on, heal the noiseThe NEO Stream has been painstakingly engineered to remove noise and distortion from the audio signal:USB ports use our ANC II active noise cancellation technologyS/PDIF outputs incorporate iPurifier technologyThe digital signal is regulated by our femto-precision GMT (Global Master Timing) clock to eradicate jitterThe retina-grade TFT display boasts SilentLine design so no electrical noise interferes with the audio signalCircuit components with low ESR, high linearity and low noise mean great sound qualityVoltage regulators with high PSRR (Power Supply Rejection Ratio), low idle current and low dropout equal low power supply noise and a synchronous 1.2MHz high-speed power supply controller to improve filtering efficiency mean power supply noise is vanishingly low. The NEO Stream has more clarity and texture, and a more dynamic and engaging performance – quite simply, you hear more of the music, just as the artist intended.

DAC + CAN + 4.4 cable = ….a fantastic desktop-sized headphone system for both digital and analogue sources. The ‘ZEN Signature Set’ comprising both the ZEN DAC Signature and ZEN CAN Signature ΜΖ99 is now available. This set includes a high-performance 4.4mm Pentaconn cable to connect them together. ZEN DAC Signature This ZEN DAC Signature is  a pure DAC and benefits from true-differential balanced circuit design to take performance to the next level. It has upgraded circuit components and short, direct signal paths for optimal signal purity. It delivers bit-perfect PCM (up to 32-bit/384kHz), native DSD (up to DSD256), DXD and MQA. There is a pair of RCA sockets for single-ended connection to an amp, plus a Pentaconn 4.4mm output. When connected to an amp or active speakers equipped with a balanced input – either a 4.4mm Pentaconn input, or stereo XLR inputs via a 4.4mm-to-XLR cable – the full benefit of the ZEN DAC Signature’s balanced circuit design can be heard. It’s outputs can be switched between ‘variable’ and ‘fixed’. ZEN CAN Signature The ZEN CAN Signature 6XX improves the sound quality of the original ZEN CAN and adds something special – a custom EQ setting called ActivEQ. It combines active and passive components to create a specific EQ curve to suit the ‘MassDrop x Sennheiser HD 6XX’ headphones. This can be switched off to make the most of all manner of headphones and in-ear monitors. It also features XSpace – an analogue processing mode which compensates for the ‘in-head localisation’ effect that can occur when using headphones to listen to music that was mixed using a pair of speakers. It features four gain settings in six dB steps – 0dB, 6dB, 12dB and 18db. The ZEN CAN Signature 6XX’s circuitry is a balanced, symmetrical dual-mono design. It delivers delivers 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 300 ohms or more through the balanced output. It offers stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Pentaconn input. A 4.4mm balanced output is also provided. It has a 6.3mm output for headphones that have a standard single-ended connector and a 4.4mm Pentaconn balanced output for headphones offering balanced connection. 4.4mm – 4.4mm cable The iFi 4.4mm to 4.4mm cable employs heavy OFHC continuous cast copper and silver matrix conductors with a total thickness of 14AWG for the best signal transfer. It’s a perfect addition to our ZEN Signature Set as this audiophile-grade cable will give you maximum quality balanced signal transfer and minimum interference. The cable construction is a custom helix design, minimised both in capacitance and inductance, minZ™. It also has intrinsic shielding provided by minZ™ helix construction. They protect the cable from RFI and EMI noise and provide the cleanest transfer medium possible. To further insulate the cable, we adopted the RoHS compliant, excellent dielectric property and super-soft (60P) HD polymer with 1500V AC spark resistance.

Network LAN filter The LAN iSilencer removes the electrical noise that distorts the audio signal from your network.It reduces the noise floor and interference.It is perfect for you if you use a wired connection and want to reduce/minimise network noise.Reduce router "noise"Loving your network streamer but getting interference via your Ethernet cable?The LAN iSilencer’s advanced tech prevents noise from interfering with the digital signal.You can connect it:To your routerTo switchesDirectly to your Ethernet wall socketGigatastic!The LAN iSilencer supports Gigabit Ethernet with no speed restrictionsIt’s shielded case with integral ground wire blocks external interference (RFI), minimises packet loss and ensures stable signal transmission.Transient Voltage Suppressor (TVS) projects your equipment against surges and voltage transients.The LAN iSilencer has a zero-jitter memory buffer and galvanically-isolated inputs to eradicate digital distortion.The LAN iSilencer boasts premium galvanic isolation technology, where electrical circuits are separated to eliminate stray currents. Audio signals can pass between galvanically isolated circuits to block differences in ground potential or currents induced by AC power.

The missing linkThe GO link is the missing link in your listening experience.Firstly, it will enable corded headphones and earphones to connect to digital devices that don’t have a 3.5mm headphone output.Secondly, even if your device does have a headphone socket, the GO link delivers a big sonic upgrade. This is because its sophisticated DAC (Digital-to-Analogue Converter) and headphone amp circuitry are superior to the audio tech contained within smart devices and computers.Go forward with GO link.Flexible friendAt one end of the GO link is a USB-C connector, and at the other is the DAC and headphone amp circuitry, both housed in robust yet lightweight magnesium alloy enclosures.In between is a 6cm length of flexible cable – this aids practicality, allowing the DAC/amp section to be angled towards the listener and reducing stress on the USB port to which the GO link is connected.DAC’s the ticketAt the heart of the GO link lies a power-efficient, high-performance DAC chip from ESS Technology’s Sabre HiFi series – the ES9219MQ/Q – benefiting from 32-bit HyperStream III architecture.This combines with Quad DAC+ and Time Domain Jitter Eliminator technologies, plus our dedicated clock circuitry utilising a specialised crystal oscillator, to deliver ultra-low distortion, excellent clarity and impressive dynamic range.Rarely implemented high-end features such as adjustable analogue gain with DRE (Dynamic Range Enhancement) plus technologies to minimise THD (Total Harmonic Distortion) and crosstalk are possible due to the DAC chip’s advanced specification.It is also possible to choose between a choice of digital filters via downloadable software.Do the twistThe cable linking both sections together uses silver-plated copper conductors with individual polymer insulation in a ‘twisted pair’ configuration.This rotational twist helps to optimise inductance and capacitance and also aids noise rejection. The GO link’s sound isn’t affected by electromagnetic interference picked up from nearby electrical sources.No distortion means you’re ready to dance without disturbance.Move with the musicUnlike other headphone dongles, the GO link doesn’t rely on the software-based volume controls in connected digital devices. This can adversely affect audio resolution.Instead, adjusting the volume on the connected device controls the volume level in the GO link’s DAC, not in the phone, tablet or computer. This hardware-based volume control is another feature that helps to deliver the GO link’s superior sonic performance.Hi-res in glorious colourThe GO link’s hi-res audio credentials are highly impressive given its diminutive size and price tag.PCM to 32-bit/384kHzDSD to 11.2MHz (DSD256)MQAAn LED changes colour to indicate the incoming audio format – PCM, DSD or MQA – and the PCM/DSD sample rate.Headphone heavenThe GO link’s headphone amp feeds a gold-plated 3.5mm socket, incorporating our S-Balanced configuration to reduce noise and crosstalk.It delivers a power output of 70mW into 32 ohms, and a maximum voltage output of 2.05V into 600 ohms. This gives it plenty of oomph to drive the kind of headphones and earphones likely to be used with the GO link and easily outclasses the headphone outputs built into smart devices and computers.Hi-Res try Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.Discrete ESS Sabre Hyperstream DAC chipset with time domain jitter eliminator, discrete oscillator and 112dB dynamic range for discerning listeners.Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and intelligent memory buffer. This represents a total ‘out-of-the-box’ systematic digital solution that solves jitter once and for all.In music production, dynamic range means the difference between the loudest and quietest sounds. It’s measured in decibels, or dB for short. In a single audio track, dynamic range means the dB difference between the loudest and quietest moment in the audio file.You can think of the dynamic range in a system as the space between the noise floor and the clipping point. When a sound goes below the noise floor you won’t be able to tell the difference between the signal and the system noise of the medium. When a sound goes above the clipping point, the tops of its waveform will get abruptly cut off, causing harshness and distortion.iFi’s proprietary technology extends the Dynamic Range by 6 dB or more, for an improved listening experience.iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.See our Tech Note to dig deeper.TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.They are pricey but are a perfect addition to our products.muRata control-type, low-ESR high-Q multi-layer capacitors. The ‘ESR control’ aspect of the Murata is something special. Their noise suppression abilities are impressive.

Description The One you needNot sure what a DAC is but know you want better sound quality for your music, movies, games, podcasts and YouTube guilty pleasures? Then, the new iFi Uno is for you.All devices that act as digital sound sources use a built-in DAC (Digital to Analogue Converter) to convert the digital info in your source device – your computer, tablet or smartphone – to music you can hear through speakers or headphones. External DACs sound much better than the standard DACs used inside these devices.Imagine the difference in quality from a standard TV to an 8K Ultra HD TV — but in sound! This is the difference an external DAC makes to your music. The iFi Uno will supercharge your sound. Everything will sound more powerful, more detailed and more real.The One you wantSmall enough to fit into the palm of your hand, the iFi Uno’s cute, curvy case is made from tough, mineral-filled polymer. Inside, the sophisticated DAC and headphone amp circuitry will upgrade the basic audio tech in all sorts of digital devices. Connect the iFi Uno via the USB-C input to your Windows PC, Apple Mac, smartphone or tablet. It needs no power source as it receives both power and audio data from the source it is connected to. Add headphones, powered speakers or an amp and separate speakers and you have what you’ve always wanted – bigger, bolder, more detailed sound.Work. Chill. Play.One simple device. Three unique modes.Music mode unlocks detailed and engaging sound from all your favourite artists. Listen while you work.Movie mode enhances dialogue clarity when you’re streaming films and must-watch TV shows. Never miss a moment.Game mode makes low-level sound effects crystal-clear. Always hear your enemies coming and storms brewing.Simply use the button on the front panel to cycle through the three settings. Illuminated logos on the top of the iFi Uno indicate your chosen mode.Uno, dos, hi-resThe iFi Uno supports different file formats – PCM 32bit/384kHz, fully native DSD256 and MQA.PCM – Pulse Code Modulation is the file format used in CD, DVD, Blu-ray and other digital audio applications. It’s the next step up from MP3.DSD – Direct Stream Digital is a very high-quality audio format, better than CD quality. The higher the number (sample rate), the better the recording – DSD64, 128, 256, 512 and 1024. Fully native means that it hasn’t been altered in any way from the original recording.MQA – Master Quality Authenticated is an award-winning audio technology that enables music fans to stream the original master recording into their home, car or their mobile. With the iFi Uno you can listen to MQA straight out of the box. Simply connect to Tidal Masters and check the option to stream MQA.DAC’s the ticketThe iFi Uno draws on our ten years of experience and the advanced spec of the DAC chip within it to unlock rarely implemented high-end features. Adjustable analogue gain with DRE (Dynamic Range Enhancement) plus technologies to minimise THD (Total Harmonic Distortion) and crosstalk and a choice of digital filters is accessible via the front-panel buttons enabling you to fine-tune the sound of the iFi Uno to your taste. In short, whether you simply use the Mode features or decide to tinker further, the iFi Uno will make audio sound clearer, minimise any interference and just give you a better entertainment experience across the board.Awesome analogueThe Uno’s analogue circuitry is just as vital to the supercharged sound quality it provides as its digital tech. The headphone amp feeds a 3.5mm socket at the front, incorporating iFi’s S-Balanced configuration to reduce noise and crosstalk. The stereo RCA output at the rear also benefits from our knack for delivering high-grade audio circuitry in remarkably affordable devices.All the analogue outputs are gold-plated to resist corrosion and maintain conductivity over time.Most DACs still use digital volume control – ours is analogue. Why is this special? When you reduce the volume on other DACs you remove data from the song or soundtrack. With analogue volume control, you reduce the volume whilst maintaining the quality. And finally, there’s PowerMatch – this ensures you always have the right amount of power to drive the headphones you are using.You can count on the iFi Uno to deliver great sound for everyoneHi-Res TrueNative® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.Discrete ESS Sabre Hyperstream DAC chipset with time domain jitter eliminator, discrete oscillator and 112dB dynamic range for discerning listeners.Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and intelligent memory buffer. This represents a total ‘out-of-the-box’ systematic digital solution that solves jitter once and for all.In music production, dynamic range means the difference between the loudest and quietest sounds. It’s measured in decibels, or dB for short. In a single audio track, dynamic range means the dB difference between the loudest and quietest moment in the audio file.You can think of the dynamic range in a system as the space between the noise floor and the clipping point. When a sound goes below the noise floor you won’t be able to tell the difference between the signal and the system noise of the medium. When a sound goes above the clipping point, the tops of its waveform will get abruptly cut off, causing harshness and distortion.iFi’s proprietary technology extends the Dynamic Range by 6 dB or more, for an improved listening experience.iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.They are pricey but are a perfect addition to our products.muRata control-type, low-ESR high-Q multi-layer capacitors. The ‘ESR control’ aspect of the Murata is something special. Their noise suppression abilities are impressive.

DescriptionPremium USB DAC. World’s most powerful headphone amp of its size.Go, Go, GO!The GO bar is our top-of-the-line ultraportable USB DAC/headphone amp.Whether you are commuting, working remotely or at your desk or simply travelling for pleasure, the GO bar is the perfectly portable way to make headphones sound heavenly.Connect to your laptop, MacBook, tablet or smartphone or any other digital device with a USB port for sensational sound at home, in the office, or on the move.Accessories include a leather travel case and a Lightening to USB-C, no need to buy a Camera Connection Kit, plus a USB-C OTG cable and a USB-C to USB-A adapter.Small. But mighty.The DAC section of the GO bar uses a powerful 16-core XMOS micro controller to process the audio data received at the USB input. Our in-house team has programmed the XMOS firmware to optimise sound quality and ensure a perfect partnership with the GO bar‘s 32-bit Cirrus Logic DAC chipset.A customised digital filter minimises pre-echoes and ringing artefacts. Our GMT (Global Master Timing) precision clock system ensures ultra-low jitter.Ultra-res PCM up to 32-bit/384kHz via USB Native playback up to DSD2562x DXDFull MQA decodingSuits you, sirFour bespoke digital filtering options:Bit Perfect – no digital filtering, no pre or post ringingStandard – modest filtering, modest pre and posting ringingMinimum Phase – slow roll-off, minimum pre and post ringingGibbs Transient Optimised – minimum filtering, no pre-ringing and minimum post ringingTwo analogue processing modes:XBass+ – an analogue bass boost to ‘add back’ lost bass response for more accurate reproduction of the originalXSpace – a holographic sound field to open up your music to give you the spaciousness of a live concertExternal affairsThe GO bar’s smart alloy case sports physical buttons for precise volume adjustment plus controls to select between various sonic tuning options. A column of coloured LEDs provides a handy guide to the format and sample rate of the digital audio currently playing, and whether XBass+ and/or XSpace are engaged.At one end is an asynchronous USB-C input and at the other a pair of headphone outputs.4.4mm fully balanced output – headphones with a balanced cable/connector can benefit from the fully balanced circuitry of the GO bar3.5mm S-Balanced output – our S-Balanced tech cuts crosstalk and noise by 50% with regular single-ended headphones.Balance of powerDespite its diminutive size, the GO bar’s analogue circuitry sports a balanced circuit design with symmetrical twin-channel output stage. This reduces noise and crosstalk in the signal path by fully separating the left and right channels. This is usually found in larger and more expensive amplifiers.The circuitry is packed full of high quality discrete components and special attention has been paid to power supply filtering too, dramatically reducing signal noise introduced through the USB input.Purity and powerThe amp’s design combines sonic purity with power.475mW into 32 ohms7.5V into 600 ohmsNo headphone amp of such a diminutive size can match the GO bar’s ability to drive tricky headphone loads or work with a wider variety of headphones.The GO bar also incorporates two power tuning technologies:iEMatch – attenuates power to suit high-sensitivity headphones and IEMs, it removes background noise and increases usable volume rangeTurbo – ramps up the gain by 6dB to satisfy more power-hungry headphones*Please note that the GO bar may not work with iPhones up to and including 6S when the phone battery is low (

DescriptionThe ZEN Air CAN is a powerful, hi-res home analogue amplifier that provides greater headphone enjoyment with any analogue source such as your PC, Mac, smartphone, tablet, streamer or TV.Amp it upThe ZEN Air CAN is an amplifier pure and simple.It simply takes an input signal from a source such as those mentioned above and creates a larger copy of the original signal before it’s sent to your headphones. Think about listening to sound with your hands over your ears and then removing them! Adding the ZEN Air CAN into your system is a little like that – back comes clarity of sound as well as volume.Lots to gain…The ZEN Air CAN comes with three gain settings so that it works well with every pair of headphones or in-ear monitors (also known as IEMs). What is gain? Gain in audio terms refers to an amplifier’s ability to increase the amplitude (size) of the signal from the source (input) to the headphones or speakers (output). More gain equals a stronger signal. You will need to adjust the gain depending on the sensitivity of the headphones or iEMs you are using. For example, highly sensitive headphones need lower gain. Play around with the settings. Trust your ears.eSpecially for youThe ZEN Air CAN has two different headphone sockets – 6.3mm single-ended and 4.4mm S-Balanced. There are basically two types of headphone – single-ended and balanced. In a nutshell, single-ended is the most common but the balanced option is often considered the better as it offers more power and control of the headphones. At iFi, we know not everyone has balanced headphones, so we’ve created our S-Balanced technology. This gives you all the benefits of a balanced connection – lower noise, less crosstalk – but without the need for balanced headphones.Sonic tailoringThe ZEN Air CAN boasts a couple of sonic tweaks, unique to iFi. XBass is analogue bass boost. In other words, it extends the bass response to suit different headphones. XSpace is an analogue headphone spatialiser. This opens up your music to give you the spaciousness of a live-concert atmosphere.TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.They are pricey but are a perfect addition to our products.Texas Instruments low-noise ICs offer great unity-gain bandwidth, very low noise and distortion, high output drive capability, Common-mode and Power Supply Rejection Ratios of over 100 dB, wide maximum-output-swing bandwidths and high slew rates.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

A breath of fresh Air.Max the audio quality from your phone, tablet or computer.Improve the quality of your everyday audio with the ZEN Air DAC.DAC stands for Digital to Analogue converter. In a nutshell, a DAC converts the digital info in your source device – your computer, games console, tablet or smartphone – to music that we can hear through speakers or headphones.Every device that is a source of digital sound has a built-in DAC. External DACs sound much better that the standard DACs used inside these devices.Hearing is believingThe ZEN Air DAC outputs very hi-res (high resolution) quality audio. This is much better that the standard audio you would get from just using your computer, games console, tablet or smartphone.Imagine the difference in quality from a standard TV to an 8K Ultra HD TV — but in sound! This is the difference an external DAC makes to your music.Once you hear it, you’ll be converted (not just your audio)!Simply betterThe ZEN Air DAC functions as both a DAC and a headphone amp. It’s a great first step if you are just starting on your audio journey.Simply connect it to your computer or smart device via a USB cable. Then connect it to your headphones via the headphone jack at the front or to speakers via the RCA connections at the back.If you already have an amp, you can use the ZEN DAC Air as a pure DAC with this amp or speakers.Flexible formatsThe ZEN Air DAC supports different file formats – PCM 32bit/384kHz, fully native DSD256 and MQA.PCM – Pulse Code Modulation is the file format used in CD, DVD, Blu-ray and other digital audio applications. It’s the next step up from MP3.DSD – Direct Stream Digital is a very high-quality audio format, better than CD quality. The higher the number (sample rate), the better the recording – DSD64, 128, 256, 512 and 1024. Fully native means that it hasn’t been altered in any way from the original recording.MQA – Master Quality Authenticated is an award-winning audio technology that enables music fans to stream the original master recording into their home, car or their mobile. With the ZEN Air DAC you can listen to MQA straight out of the box. Simply connect to Tidal Masters and check the option to stream MQA. Sonic tailoringThe ZEN Air DAC also sports a couple of unique sonic tweaks from iFi.PowerMatch adjusts the gain of the ZEN DAC Air so it functions at the right level for your headphones. Gain is just a unit of measurement that indicates how loud an audio source is and is measured in decibels (dB).XBass+ allows you to tailor the bass to suit your headphones and your personal taste.Both are designed to improve and personalise your listening experience.And breathe…Most DACs still use digital volume control – ours is analogue.What does this mean? When you reduce the volume on other DACs you remove data from the song or soundtrack. With analogue volume control, you reduce the volume whilst maintaining the quality.Put simply, the ZEN Air DAC is an easy way to experience super clear, hi-res audio quality in your everyday listening.Sift through the noise, breathe in the Air.The XMOS 16-Core chip processes the audio data received via the USB digital input.This new low-latency XMOS microcontroller has greatly enhanced processing power. Compared to the current generation of eight-core chips, this new 16-core IC delivers double the clock speed (2000MIPS) and four times the memory (512KB), as well as the latest SuperSpeed USB standard.iFi’s in-house digital development team has programmed the XMOS firmware to optimise sound quality and ensure a perfect partnership with the Burr-Brown DAC.The Burr-Brown True Native® chipset means file formats remain unchanged or ‘bit-perfect’. This means you are listening to music as the artist intended in the format in which it was recorded.At iFi we use Burr Brown extensively in our products having selected it for its natural-sounding ‘musicality’ and True Native architecture. Our experience with this IC means we know how to make the most of it.Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.MQA is an award-winning audio technology that enables music fans to stream the original master recording into their home, car or on their mobile. In the words of Gilbert O’Sullivan, iconic Irish-born singer-songwriter, “The great thing about MQA is that it delivers the finesse that was there in the desk sound. It’s tremendous, it sounds really good.”As with many other iFi audio products, we’ve incorporated a custom OV Series operational-amplifier. This top-notch component contributes to the extremely low noise, low distortion (0.0001%) and wide bandwidth.Texas Instruments low-noise ICs offer great unity-gain bandwidth, very low noise and distortion, high output drive capability, Common-mode and Power Supply Rejection Ratios of over 100 dB, wide maximum-output-swing bandwidths and high slew rates.TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.They are pricey but are a perfect addition to our products.

ONE to rule your home audio Only DAC  you’ll need (Bluetooth + USB + S/PDIF) ZEN One Signature Our ZEN One Signature takes the DAC stage from the ZEN DAC V2, adds S/PDIF inputs (optical and coaxial) alongside the USB port, stirs in Bluetooth technology from the ZEN Blue V2 and seasons the pot with Signature-grade circuit enhancements to create a delicious audio brew. The result? The ZEN One Signature is a pure DAC (no built-in headphone amp and volume control) that serves as a home audio hub for all your digital devices, from smartphones and tablets to PCs and Macs, disc players and audio servers to TVs and games consoles. Home Hub DAC The ZEN One Signature is the first ZEN DAC to support all hi-res: DSD256, PCM384, MQA384kHz, Bluetooth 96KHz. 96kHz Hi-Res Bluetooth: LDAC, HWA/LHDC, aptX Adaptive/HD/LL, AAC USB audio using 16 Core 2000MIPS XMOS low latency microcontroller (MQA decoder) Fully balanced 4.4mm output Purity of design, no headphone amp, no volume control. The ultimate DAC for all your home audio sources. HD Bluetooth The next-generation HD Bluetooth technology in the ZEN One Signature ensures the best sound from every source. Extensive high-definition codec support – aptX HD, aptX Adaptive, LDAC and HWA/LHDC. High-gain antenna delivers extended Bluetooth range. You’ll love it. Discerning Digital The ZEN One Signature offers the following to transform home music enjoyment: True Native hi-res DAC – supports 32-bit/384kHz PCM and fully native DSD Powerful 16-core XMOS processor – performs full MQA decoding (to 384kHz) Upgraded GMT femto-precision clock and customised digital filter eradicate jitter and other forms of digital distortion Optical and coaxial S/PDIF digital outputs support 32-bit/192kHz PCM and MQA Awesome Analogue Balanced circuitry is what the ZEN series is famed for. The ZEN One Signature continues the tradition: Balanced circuit design with Signature-grade circuit components delivers ultra-low distortion and exceptional sonic purity 4mm Balanced and RCA single-ended analogue outputs – connect to an integrated amp, preamp, headphone amp or active speakers Signature Special The Signature series always includes extra special additions: Low-jitter femto clock crystal provides >20dB performance 16 Core 2000MIPS XMOS low-latency microcontroller – 4x more processing power C0G capacitors – high-linearity, excellent temperature/frequency characteristics MELF resistors – high-precision and low-noise Taiyo Yuden and Murata inductors – low-impedance power supply rails High-gain antenna for extended range

Let the iPurifier3 improve your USB audio playback experience. Gremlins beware Computer audio often comes with annoying noise and jitter. The iPurifier3 is for anyone into USB audio who regularly battles with these irritating audio gremlins. Never fear, let the iPurifier3 be your system’s white knight. The white knight The third generation and slightly larger reincarnation of the iPurifier measures just 69 x 19 x 20mm in its new, dashing white armour. Both Type A and B are available. It uses iFi Active Noise Cancellation2 tech to decrease noise by 100x or -40dB in comparison to the common noise filter. REclock, REgenerate, REbalance® Our state-of-the-art REclock, REgenarate and REbalance2® technology will get your audio back on track. Put simply, it actively ‘restores’ the USB audio+power streams which eliminates jitter and ensures smooth passage for your music. REbalance® actually removes distortion caused by DC offset. Dashing. Durable. The iPurifier3 is set up for all future PCM, DSD and DXD formats. And it’s not just better looking on the outside, it’s been improved on the inside with updated components. No need to worry about upgrading for years to come. It will improve your USB audio playback experience faster than you can say King Arthur and the Round Table.

The ZEN CAN Signature 6XX analogue headphone amplifier takes sonic tailoring to the next level with ActivEQ. ActivEQ This new feature, called ActivEQ, combines active and passive components to create a specific EQ curve to suit a particular pair of headphones, performed in the analogue domain without a hint of additional noise or distortion. The ZEN CAN Signature 6XX, features ActivEQ for the ‘MassDrop x Sennheiser HD 6XX’ – a popular pair of high-quality headphones with more than 120,000 sold to date, based on the Sennheiser HD 650 and created exclusively for Drop.com. These headphones are renowned for the quality of their midrange performance but exhibit some quirks in the bass and treble regions, which can be seen in frequency response measurements. EQ. Activated. When the ‘HD 6XX’ button is pressed, the ZEN CAN Signature 6XX calibrates its signal to complement the headphone’s response characteristics right across the frequency range, thus tailoring its performance to precisely fit the HD 6XX like a made-to-measure suit. In particular, the 7kHz treble and bass below 500Hz is gently elevated. What’s more, the benefits of this ActivEQ curve are equally applicable to the Sennheiser HD 650, which shares the same characteristics. It also has an effect on other Sennheiser models – take a look here. This feature can be switched on or off. Without ActivEQ engaged, the ZEN CAN Signature 6XX’s performance is adroitly balanced to make the most of all manner of headphones and in-ear monitors. No pain, just gain. The ZEN CAN Signature 6XX features four gain settings in six dB steps – 0dB, 6dB, 12dB and 18db. This enables the amp to precisely suit the connected headphones. Unity gain (0dB) is useful to ensure low noise with sensitive in-ear monitors, while the higher gain settings make the most of tougher headphone loads, delivering excellent dynamic headroom. XSpace This analogue processing mode compensates for the ‘in-head localisation’ effect that can occur when using headphones to listen to music that was mixed using a pair of speakers. It widens the headphone soundstage to deliver a more spacious and speaker-like experience. Balance of power The ZEN CAN Signature 6XX’s circuitry is a balanced, symmetrical dual-mono design – a topology usually reserved for high-end headphone amps – with a number of key elements trickled down from the discrete Class A circuitry developed for iFi’s flagship headphone amplifier, the Pro iCAN. Key components have been upgraded to enhance performance in line with the improvements made to the ZEN CAN Signature 6XX, including the use of Panasonic OS-CON and Elna Silmic II capacitors. Driving force The amp offers prodigious drive capability, delivering 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 300 ohms or more through the balanced output, ensuring it takes even current-hungry planar headphones in its stride. Delivering ultra-low distortion, rich sonic detail, engaging dynamics and the ability to drive all manner of headphones with ease, the ZEN CAN Signature 6XX is a truly a driving force to be reckoned with. Stay connected The ZEN CAN Signature 6XX offers stereo RCA and 3.5mm single-ended inputs, plus a 4.4mm Balanced input. A 4.4mm balanced output is also provided, to connect to power amps equipped with a balanced input. It provides a pair of headphone outputs – a 6.3mm output for headphones that have a standard single-ended connector (compatible with all headphones) and a 4.4mm Balanced output for headphones offering balanced connection. An increasing number of high-quality headphones and in-ear monitors either come so equipped or give the option of detaching the cable and upgrading to a 4.4mm Balanced connector, and this output makes the most of them (it is particularly recommended for high-impedance headphones). Dynamic Duo The ZEN CAN Signature 6XX works well with the ZEN DAC Signature V2. Products can be bought separately but a ‘ZEN Signature Set’ is now available. This comprises both ZEN Signature units plus a high-performance 4.4mm Balanced cable (worth £69 when purchased separately) to connect them together. When used in tandem, the two ZEN Signatures make a fantastic, desktop-sized headphone system for both digital and analogue sources, further extending the reputation of iFi’s ZEN Series for delivering exceptional performance and versatility at remarkable prices.

Fantastic Beasts. Here’s where you find them. Portable DAC/amps tend to be compromised because they focus on a great digital OR a great analogue section. But not both. The xDSD Gryphon is different. Just like its mythical namesake, it is two beasts in one. From the Ultra-Res digital stage using the Burr-Brown MultiBit at the core to the PureWave analogue power section pumping out 1,000mW and other things in-between, it takes serious headphones to tame the Gryphon. Well-connected Separate Bluetooth + DAC + amp stages: each optimised for maximum performance Digital sources via USB, S/PDIF or Bluetooth Analogue sources via 4.4mm or 3.5mm inputs Brilliant Bluetooth. Hi-Res Wireless. Using the latest QCC 5100 series Bluetooth v5.1 as the starting point, for wireless connectivity, the xDSD Gryphon is at the bleeding-edge when it comes to the latest formats: aptX Adaptive and aptX HD LDAC and HWA/LHDC regular aptX and aptX Low Latency AAC SBC (plain vanilla Bluetooth) Not only this but the above is on the iFi digital platform where each section is distinct. So QC5100 for reception > Global Master Clock for jitter > Burr-Brown for DAC conversion. More effort but that’s why our wireless gives wired a run for its money. USB & S/PDIF. Wired to the nines. In terms of wired connectivity, the xDSD Gryphon handles all the formats using a hybrid Burr-Brown DAC chipset which is the same as used in our £3,000 flagship, the Pro iDSD Signature. Rest assured that all the following latest formats are catered for but most importantly, are pushed to their zenith. On USB: PCM (768/705.6/384/352.8/192/176.4/96/88.2/48/44.1 kHz) DSD (512/256/128/64) DXD (768/705.6/384/352.8kHz) MQA (Decoder) On S/PDIF PCM (192/176.4/96/88.2/48/44.1 kHz) DoP Balance of Power The xDSD Gryphon uses our PureWave amplification circuitry. It has 1,000mW at 32 Ohms. With a whopping max 6.7v output, bring on the high impedance headphones because the Gryphon will not break a sweat driving them. This is plenty to drive all manner of headphones. The 4.4mm Balanced is the best for balanced playback. The 3.5mm S-Balanced will max SE headphones. And your premium high-sensitivity IEMs have not been forgotten either – iEMatch will cut out the hiss. Tailored to your ears XSpace adds back the cavernous sound stage of recordings. XBass II reinstates the missing bass from open-backed headphones or for recordings that you hanker for bass slam. Under XBass II you can select ‘Bass’ and/or ‘Presence’ so that the upper midrange frequencies are correctly added back into your favourite recording. iEMatch – is our proprietary tech which reduces the annoying hiss from high-sensitivity headphones without losing any dynamic range. With digital sources, users can choose between three bespoke digital filters via the on-screen menu: Bit-Perfect, Standard and GTO (Gibbs Transient Optimised), each having a fine-tuning effect on sound. OLED. Seen but not heard. The OLED display and iFi’s CyberSync operating system combined, usher in a whole new world of user enjoyment – all information from format to battery life is there. Just as importantly, SilentLine technology means the display does not add noise into the system. It can even be set to off if preferred.

Super light. Super sound. The new GO blu, pocket-rocket portable HD DAC/amp, is diminutive enough to take with you wherever you go! It gives you best sound from wired but the convenience of wireless as you no longer need to have a cable connection to your smartphone. Whether you’re exercising at the gym with your Apple watch clocking your every step or catching up on your MacBook at your favourite coffee shop, the GO blu is the perfect companion. It pairs wirelessly with your source device via Bluetooth with no need to worry about whether you’ve got the right cable for your Android or Apple device. Just pair … and GO! Superior sound. Unbound. Wireless headphones or earphones of any kind integrate Bluetooth processing, D/A conversion and amplification onto one, standard ‘off the shelf’ chip. There is a ceiling to the sound quality that can be achieved. Team good corded headphones or in-ear monitors, with a separate, high-quality portable DAC/headphone amp, and your sound quality will beat any pair of wireless headphone or earphones hands down. Using the GO blu means no compromise on sound quality. Pair the GO blu to your Apple/Android. Connect your favourite corded headphones to the GO blu and then tuck it away –  it’s so petite it will slip into your running gear or suit pocket. It’s also gorgeous enough to show off by leaving it on the table at your favourite coffee shop! GO blu. Go beyond. With its lightweight, soft-touch polymer enclosure (great for Bluetooth reception, unlike signal-blocking metal), copper-coloured trim and ChronoDial watch crown-style control, the GO blu is a pleasure to use wherever you go. iFi has even incorporated a high-quality chip-based (CMOS-MEMS) microphone, enabling hands-free calls, voice chat for gaming and access to voice assistants such as Apple Siri and Google Assistant. Further flexibility is provided by the USB-C charging port, which doubles as an audio input enabling USB connection from source devices that don’t offer Bluetooth connectivity. Hi-res PCM audio data up to24-bit/96kHz is supported when the GO blu is connected in this way. HD Bluetooth 5.1 The way iFi implements Bluetooth is anything but ‘run of the mill’ and despite its diminutive size the GO blu is no exception. The use of Qualcomm’s latest four-core QCC5100 Bluetooth processing chip ensures that every current high-definition Bluetooth audio format is supported. aptX Adaptive and aptX HD LDAC and HWA/LHDC regular aptX and aptX Low Latency AAC SBC (plain vanilla Bluetooth) This means that every possible source device is handled at the highest audio resolution its Bluetooth specification allows – no other pocket-size DAC/amp delivers such comprehensive codec support, or such high-quality sound over Bluetooth. The GO blu is Bluetooth v5.1-compliant, ensuring the best possible range, stability and performance, and its ‘Bluetooth engine’ can be updated over the air. Three. Unique. Stages. Bluetooth. DAC. Amplifier. Most pocket-size Bluetooth DAC/headphone amps incorporate all-in-one ‘system on a chip’ solutions to deliver input processing, digital-to-analogue signal conversion and amplification. These are simple and cost-effective, but they cannot compare with expertly designed, individually optimised circuit stages when it comes to sound quality. Uniquely for a device of this type and size, the GO blu’s clever design packs in separate Bluetooth + DAC + Amp stages, each engineered in distinct blocks to deliver the ideal combination of cutting-edge specification and superb sound. Others just don’t this level of execution. The Bluetooth stage makes full use of Qualcomm’s latest four-core QCC5100 Bluetooth chip and supports every current high definition format. This then feeds the DAC stage with a Cirrus Logic 32-bit DAC chip at its heart. This is coupled with a customised digital filter to minimise pre-echoes and ringing artefacts, and a precision clock system to ensure ultra-low jitter, thus reducing errors and distortion in the digital audio signal. The amp circuitry benefits from symmetrical twin-mono signal paths and utilises iFi’s Direct Drive design concept – direct-coupled to ensure a clean signal path without distortion-inducing output coupling capacitors. The amp stage delivers up to 5.6V (twice the voltage of others) – considerably more power than other similarly sized devices – handling even relatively tough headphone loads with ease. To ensure signal strength suits the sensitivity of the connected headphones or earphones, auto-gain adjusts output up or down by 6dB.

Just add Remote Control. Beneath its classy exterior, the ZEN Stream is a technological streamer-de-force. It has one purpose – to send music simply from the Internet to your DAC with no loss of quality. True hi-res performance of PCM384/DSD256 via WiFi/LAN. Just add your smart device as a remote and away you go. Optimised open-source architecture – works with multiple dedicated platforms, completely and perfectly future-proofed as it is constantly updated. Ease of use + audiophile implementation. Follow our simple set-up guides on YouTube. It is the bee’s knees of Streamers. Warp speed tech. ZEN Stream is a true ground-up design by iFi — the hardware and software implementation is quite exceptional: Two SuperSpeed USB3.0 ports with Active Noise Cancellation II S/PDIF out with the iPurifier built-in iFi software developed with Volumio open-source as the starting point, then coded and optimised by us to achieve the purest streaming software bar none These are some of the factors behind why the ZEN Stream is at the cutting-edge handling PCM384/DSD256 on LAN and WiFi (802.11n, with 100Mbps on 5Ghz). ‘Exclusive’ for your ears only. The ZEN Stream has one of the most fully-optimised software platforms in the world. From the device’s drivers, to the kernel (the heart of the operating system), to the shell (which interfaces with the kernel), to the applications and the user interface — everything is fully optimised for seamless operation and excellent sonic performance. An ingenious part of the ZEN Stream’s design is the ability to select between ‘Exclusive’ modes – individual settings dedicated to specific modes of operation to deliver the purest possible performance. All other programs are shut down – to minimise ‘software jitter’ — an often overlooked aspect that negatively impacts the quality of computer audio playback. This ensures that the ZEN Stream is not merely a ‘jack of all trades’, but a master of all too. All-in-one (AIO) covers all modes Roon only – feature coming soon – ROON ready Tidal streaming NAA streaming DLNA streaming Who’s who of Streaming. Hot off the press, the ZEN Stream has the following connectivity options: Stream straight from Spotify/Tidal apps with Spotify Connect and Tidal Connect Works with any DLNA certified streaming app (our own app is imminent!) Integrated Airplay and Chromecast* – easy streaming from Apple and Android devices ROON Ready functionality to be added in a future update. NAA operation in conjunction with Sygnalist’s HQPlayer software Tech savvy. Beneath the unassuming casework sits some serious horsepower in terms of both technologies and components: Powerful 64-bit quad-core ARM Cortex microprocessor USB and S/PDIF interfaces regulated by femto-precision GMT clock to eradicate jitter Active Noise Cancellation II and iPurifier technologies for USB and S/PDIF interfaces respectively Intelligent Ethernet switch controller High-PSRR, low idle current, low-dropout voltage regulators with soft start Synchronous 1.6MHz high-speed precision power supply controller C0G capacitors and Taiyo Yuden and Murata low ESR inductors

For the record Matt polished black. Super quiet noise floor. Our phono stage circuitry uses only the best audiophile components. Computer matched op-amps, high-gain bi-polar output transistors to Nichicon audio-grade capacitors. And much more. The iPhono3 Black Label sounds stellar. Hear into your LP. Silent nights in With a stunning, super-low 85dB noise floor (per Stereophile standard) the iPhono3 Black Label is out there. One of the quietest phono stages. Period. Like any good phono stage, it amplifies the signal, not the noise. The whisper-quiet noise floor is there for any home audio system to discern. Take it for a test drive from the comfort of your favourite listening chair. Exacting equalisation Precise EQ curve and explosive 108dB dynamic range. Your listening room becomes a concert hall. The AMR PH-77, the $12,000 larger sibling with 23 equalisation curves, remains the vinyl benchmark to this day. Trickle-down tech used in the iPhono3 Black Label means it features the 6 most popular stereo EQ curves. Try the infamous 1812 Overture ‘torture test’. Won’t be the same again. The iPhono3 Black Label will have you trying ‘just one more LP’ into the wee, small hours. Set and forget Your pickup (stylus) has been lovingly crafted. Whether it’s MM or MC, no two cartridges are identical in performance. The iPhono3 Black Label, like the AMR PH-77 from which it descends, enables you to set the precise load/gain for the cartridge you have. Squeeze every last drop of performance out of your precious pickup. Spec’d to thrill Beneath the modest footprint of the iPhono 3 Black Label are Class A TubeState and DirectDrive Servoless technologies. Specially developed by AMR for iFi audio. All underpinned by some quite special audiophile components from Burr-Brown, TDK and Nichicon. To name but a few. With such dedicated circuitry and devoted components, it has a whisper-quiet noise floor and measured THD of an incredible

52x more power. Pump up the volume. Laptops and smartphones have a really low power output of

Chill out. At home. In the office. The super-affordable compact DAC/headphone amp just got even better. Added oomph! This ZEN DAC V2 is the same award-winning hi-res USB DAC/headphone amp as before but with added oomph! We’ve upgraded its digital engine from an 8 core XMOS chip to a 16 core chip. It’s ultra-capable while still being super-affordable. Compact enough to use as a USB DAC/amp on your work desk and stylish enough to use at home with your favourite active speakers or amp, it delivers a level of specification and performance that punches above its super-affordable price tag. The ZEN DAC V2 supports PCM and DXD to 32-bit/384kHz, DSD256 and MQA. DSD remains ‘bit-perfect’ thanks to the True Native Burr-Brown chip design. 16 core = hardcore. Thanks to the 16 core tech, the ZEN DAC V2 is now an MQA Decoder rather than a Renderer only. This enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The LED glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner. MQA rendering technology (used in the original ZEN DAC among other iFi products) connects to an MQA Core signal (such as TIDAL) and completes the final unfold of an MQA file. Usually, the computer has carried out the decoding.  Smooth and balanced. A new and improved low jitter, crystal clock means >20dB better performance. The super-low noise performance means the ZEN DAC V2 will remain quiet even in noisy situations such as yachts or RVs. The balanced design for the analogue stage – rare and not found at this price point – makes it pretty special and delivers the best sound quality, normally found in higher priced models. The ZEN DAC V2 sports Pentaconn 4.4mm balanced outputs at both the front and back. On the front, there’s also the popular 6.3mm headphone socket. Flexible. Switch effortlessly between ‘variable’ and ‘fixed’. Set to ‘Variable,’ use the ZEN DAC V2 as a pre-amp to feed a power amp or active speakers. On ‘Fixed’ to bypass the volume control. Connect to an external pre-amp or integrated amp. Power. Drive. Performance. Our headphone amp has PowerMatch – switchable gain to perfectly match your headphones. For IEMs, normally high-sensitivity, leave PowerMatch at its lower setting for hiss-free listening. On/over-ear headphones with relatively low impedance require more power – press PowerMatch to increase the level of drive. Ace of Bass. The ZEN DAC V2 boasts TrueBass. This proprietary tech is a switchable ‘bass boost’ operating in the analogue domain. There’s no DSP with iFi gear. TrueBass enhances the bass but does not muddy the mid-range. Perfect for use with IEMs or open-back headphones which often lack bass. The ZEN DAC V2  is the ultimate chilling machine. Tune in and ZEN out. The XMOS 16-Core chip processes the audio data received via the USB* digital input. This new low-latency XMOS microcontroller has greatly enhanced processing power. Compared to the current generation of eight-core chips, this new 16-core IC delivers double the clock speed (2000MIPS) and four times the memory (512KB), as well as the latest SuperSpeed USB standard. iFi’s in-house digital development team has programmed the XMOS firmware to optimise sound quality and ensure a perfect partnership with the Burr-Brown DAC. The Burr-Brown True Native® chipset means file formats remain unchanged or ‘bit-perfect’. This means you are listening to music as the artist intended in the format in which it was recorded. At iFi we use Burr Brown extensively in our products having selected it for its natural-sounding ‘musicality’ and True Native architecture. Our experience with this IC means we know how to make the most of it. Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384. MQA (Master Quality Authenticated) is supported through the USB with full decoding of MQA files up to 384kHz thanks to the processing power of the new 16-core XMOS chip. This means that the full ‘three unfold’ decoding process is performed internally, as opposed to only the final unfold in the manner of an MQA ‘renderer’. Globally, MQA has become an important consideration for any comprehensively equipped DAC. It is available through for Tidal Masters, Audirvana and Roon. Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and the intelligent memory buffer. The low-jitter crystal clock has been updated to provide >20dB better performance It is a superior method to the traditional single-ended circuit approach. Balanced circuits reduce noise and crosstalk. Less Interference – clearer sound. You normally find this set-up in products at the higher end of the price spectrum such as the Pro iCAN but iFi is now using this across its range to produce the best quality audio for all our customers. TrueBass – delivers genuine bass with realistic depth and definition. Everything from timpani to a bass guitar, to an electronic bassline, is conveyed with power and poise.

Does your USB audio system suffer from annoying background noise? Our new and improved iSilencer+ is a must if you want to enjoy vivid, open music. Enjoy the ‘new’ silence. Connecting audio gear via USB can have pros and cons. While capable of passing hi-res data at max resolution and allowing bit-perfect transfer, USB was not created specifically for audio. It carries both power and data. It is susceptible to electrical noise, for example, from the computer’s power supply. This has a negative effect on sound quality. Fear not! At iFi, we first banished these gremlins with the iSilencer3.0 and now, we’re making silence sound even better with the iSilencer+. Plug. Play. Pop free. Electrical noise on USB causes errors, data loss and poor signal integrity. You will hear these as distortion – pops, clicks and delays. The iSilencer+ solves all of this quickly and easily. It plugs directly into the USB port of your computer as a link between your computer and your DAC. It will remove electrical noise, both EMI and RFI, at source. Your music will seem clearer, warmer, and more transparent with improved bass. Double whammy. As well as plugging the iSilencer+ into the active USB port between the computer and DAC, it can also be plugged into unused USB ports too. This will further reduce radiated EMI. Each time the number of units (and therefore the number ANC II circuits) is doubled, noise reduction capability also doubles. Double whammy. Silence. Improved. The iSilencer+ uses our latest Active Noise Cancellation II® technology. It decreases noise in a similar way to noise-cancelling headphones. We use our REBalance® tech to get rid of clicks and distortion. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. Why iSilencer+? We’ve added several flavours – it comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Why did we name it iSilencer+? Simply because it just gives you more – more options, improved filtering, and just more silence.

Does your USB audio system suffer from annoying background noise? Our new and improved iSilencer+ is a must if you want to enjoy vivid, open music. Enjoy the ‘new’ silence. Connecting audio gear via USB can have pros and cons. While capable of passing hi-res data at max resolution and allowing bit-perfect transfer, USB was not created specifically for audio. It carries both power and data. It is susceptible to electrical noise, for example, from the computer’s power supply. This has a negative effect on sound quality. Fear not! At iFi, we first banished these gremlins with the iSilencer3.0 and now, we’re making silence sound even better with the iSilencer+. Plug. Play. Pop free. Electrical noise on USB causes errors, data loss and poor signal integrity. You will hear these as distortion – pops, clicks and delays. The iSilencer+ solves all of this quickly and easily. It plugs directly into the USB port of your computer as a link between your computer and your DAC. It will remove electrical noise, both EMI and RFI, at source. Your music will seem clearer, warmer, and more transparent with improved bass. Double whammy. As well as plugging the iSilencer+ into the active USB port between the computer and DAC, it can also be plugged into unused USB ports too. This will further reduce radiated EMI. Each time the number of units (and therefore the number ANC II circuits) is doubled, noise reduction capability also doubles. Double whammy. Silence. Improved. The iSilencer+ uses our latest Active Noise Cancellation II® technology. It decreases noise in a similar way to noise-cancelling headphones. We use our REBalance® tech to get rid of clicks and distortion. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. Why iSilencer+? We’ve added several flavours – it comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Why did we name it iSilencer+? Simply because it just gives you more – more options, improved filtering, and just more silence.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

Quiet as a battery. None of the hassle.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

GND control. Take out speaker hum. Ground control to Major components. The optimum configuration for each system is one Ground/Earth for the whole system. If a system has multiple Grounds/Earths, then it often creates unwanted ground loops. These systems will then have an annoying low-frequency hum (emitted from the speakers). Current solutions either jeopardise (i) both safety and EMI shielding (e.g. cheater plug), or (ii) EMI shielding. And most are single country (US) uses only. The GND Defender in the correct way, intelligently detects a ground loop and will cut the ground for that component. AI ground detection. With a GND Defender at the IEC power input, it will intelligently detect and remove the ground loop at the component. Behind this, the GND Defender: Intelligently breaks DC ground loops to eliminate ground loop hum EMI shielding is retained Equipment Safety is unaffected (not a ground lift – so maintains equipment safety ground) If multiple ground loops exist, more than one GND Defender may be required. The GND Defender is smarter than the average ground lift. By a long way. Battleship build. The GND Defender is not only at the cutting-edge in terms of technology but also safety: High-performance glass passivated semiconductor High Case Dielectric Strength of 1500VRMS UL Listed X7R Capacitor High-temperature stability Flame resistant IEC socket/connector/chassis Fireproof polymers UL94-V0 Remember that best practice is to always keep at least one direct power cable connection.

The amplifier is the heart of your system. If you have a mechanical hum, deploy the DC Blocker. Got big amplifier. Bye bye mechanical hum. Many large amplifiers have a really annoying mechanical hum (emitted from the toroidal transformer itself). You can hear it when you place your ear close or next to the chassis. This is caused by a small amount of DC voltage in the mains which makes its way through to the mains transformer, it will become ‘saturated’ and start to hum like a trooper. The DC Blocker is a clever device that you place at the IEC (at the rear power inlet) and as its name implies, it stops DC from getting into the amplifier. It therefore eliminates amplifier transformer hum. Cute. Clever. All the benefits of cutting out annoying hum with no drawbacks. Intelligently stops any DC voltage from the mains to eliminate transformer hum EMI shielding is retained Equipment safety is unaffected Behind every good component is a DC Blocker. The bigger the amplifier, usually, the larger the toroidal which is susceptible to residual DC voltage. JUst add the DC Blocker at the IEC to stop DC from getting in. 90-240V Maximum rating >10A, continuous current rating 7A Small size, universal application, won’t block any other connectors, sockets, or cables

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Quiet as a battery. None of the hassle.

Quiet as a battery. None of the hassle.

Our audiophile extension block brings super quiet mains power to your system. Whatever your set-up, digital, analogue or both, the PowerStation will ensure your system receives super quiet main Power to the people The iFi PowerStation is for everyone who likes their audio interference free. It comes in 4 variatons – UK, EU and AU with 6 individual sockets and USA/JAPAN with 8. Put a stop to RFI or EMI noise and enjoy pain-free audio – all from one solid, snazzy dark anodised aluminium power block. Ready, steady, go. The PowerStation uses iFi’s Active Noise Cancelation II to ACTIVELY eliminates noise across the frequency range, even across the lower frequencies. Each outlet has added passive filters to also eradicate noise from the very highest frequencies Nothing left to chance… Each outlet is independently isolated in its own chamber to prevent cross-contamination, with the addition of vibration-damping EVA (ethylene-vinyl acetate). We use PurCopper – a form of 99.9999 per cent pure OFHC (oxygen-free high-conductivity) continuous-cast copper – for its superior conductivity. Gives you the earth… The PowerStation has inbuilt earth/ground and polarity detection. No earth/ground can lead to annoying buzzes and hums – the scourge of audio. We’ve added a 4mm banana socket to the PowerStation so a grounding cable can be used to create a ground/earth when one isn’t present. Bingo, the sound is gone. …but keeps you grounded And the PowerStation is smart. The supplementary ground/earth connection will NOT introduce a ground loop EVEN if the system is already earthed. More than one earth would also create a ground loop leading to more buzzing and humming and we don’t want that. Fiercely protective Polarity detection is vital if you don’t want to hamper the quality of your audio mains. With the PowerStation, this is built-in. And never fear, max. 30,000A @ 1,000V/10uS surge protection is also here. If it detects a power surge or a mains short, the PowerStation will shut down, protecting your downstream equipment from peril. Not so humble beginnings The PowerStation doesn’t forget where it came from – the original AC iPurifier. You can still use your original AC iPurifier with the PowerStation – use them to separate your digital and analogue devices for even less noise contamination.

Devilishly brilliant The iDSD Diablo, with its sleek new design and fiery red finish, sits proudly at the top of our range of portable/transportable DAC/amps. It is built for purists – the true headphone enthusiasts who crave pure, unadulterated sonic performance. Just like a racing car designed for uncompromising speed, the iDSD Diablo sets aside sonic tailoring as well as Bluetooth connectivity to focus on pure sonic power. Prepare for a riveting ride as it will drive any headphone on the planet with aplomb. Put simply, the iDSD Diablo is our best ever transportable amplifier designed to deliver reference level sound. ‘Bit-perfectly’ wicked We use two Burr-Brown DAC chips and the new 16-core XMOS chip to process the data received via the USB and S/PDIF digital inputs. This means the iDSD Diablo can handle up to PCM 768, DSD 512, 2xDXD. Both PCM and DSD remain ‘bit-perfect’. It also provides full MQA decoding! Check out our MQA set-up tutorial (using the highly acclaimed NEO) for Tidal, Roon and Audirvana Positively pure Balanced, differential analogue circuit design reduces noise and cross-talk within the signal path by fully separating the left and right channels. The iDSD Diablo benefits from further refinements to our balanced, symmetrical dual-mono topologies with short, direct signal paths. We call this PureWave. Negative feedback is used in amplifier circuits to compare the output signal with the input signal and correct errors. BUT there are drawbacks. iFi turns the negatives into positives with OptimaLoop. Read more on these technologies below. Diabolically dynamic Able to drive all manner of headphones with ease, the iDSD Diablo delivers up to 5000mW of prodigious power, propulsive energy and engaging dynamics, coupled with a remarkable ability to resolve fine texture and detail. With 3 settings, you can adjust power and gain to suit your daily driver or track day supercar! Turbo – ramps up the level of drive for current-hungry headphones Normal – for most over or on ear headphones Eco – dials down the power to suit high-sensitivity in-ear monitors The iDSD Diablo’s focus on pure, unadulterated performance, means much attention has been applied to the power supply circuity. Battery power provides ultra-clean and stable DC current avoiding the issues of mains electricity – dips, spikes and noise-inducing RFI/EMI pollution. BUT there are sonic downsides resulting from low output voltage and inconsistent output impedance as batteries discharge. These issues are fully tackled by the iDSD Diablo’s design. In order to make less efficient headphones, like planar magnetics, sing, the voltage needs to be stepped up from 3.7V to +/- 15V.  We use a step-up converter running at 1.2MHz – a frequency far beyond audibility that is easier to filter than a typical switch-mode supply, enabling high linearity and ultra-low noise. Formula 1, iFi style. High-bandwidth power supply circuity is dedicated to each critical part of the iDSD Diablo’s design, with independent linear regulation delivering excellent PSRR (Power Supply Rejection Ratio) performance. The headphone amp stage eschews IC regulators in favour of Panasonic OS-CON capacitors, delivering 2320uF between them. The DAC section benefits from an ultra-low-noise regulator with additional passive filtering, reducing high order harmonic distortion and, in turn, jitter. Even the USB input stage benefits from dedicated regulation and multi-stage filtering, and the microprocessor control circuitry (often a local source of digital noise) has separate regulation, too. Hooking up with the Devil… At the front of the unit, alongside a standard 6.3mm single-ended headphone socket, resides a 4.4mm Pentaconn output for headphones offering balanced connection. At the back are two digital audio inputs: USB-A and a S/PDIF socket that accepts both electrical and optical signals, the former via a 3.5mm connector and the latter via a supplied adapter. The USB-A input features a ‘male’ connector, rather than a typical ‘female’ port for greater mechanical integrity.  A separate USB-C charging port is also provided, along with a 4.4mm Pentaconn balanced output to connect to an external amp. Accessories galore As befits a reference-level product, we’ve included a whole host of accessories in a luxurious travel case, the iTraveller. As the iDSD Diablo may be powered from the mains, as well as by its built-in battery, we’ve included our super silent, noise-cancelling iPower 5V AC/DC adapter to ensure optimal sound quality. Also included is a 4.4mm Pentaconn to XLR balanced interconnect cable to connect the iDSD Diablo to an amp and speakers (or a pair of active speakers) with balanced XLR inputs. Other supplied connectors include a high-quality USB-A audio cable, a USB-A to USB-C charging cable and an adapter to connect headphones with a 3.5mm jack to the 6.3mm single-ended output.

The premium all-in-one music system that sounds as good as it looks. For music lovers, pure and simple. In your home. In your office. In your garden. Your music has never looked or sounded this awesome. French design. Japanese inspiration. Our designer, Julien Haziza, drew inspiration from Japanese industrial designers and architecture – namely Shigeru Ban, Tadao Ando and the Omotesandō and Harajuku districts in Tokyo. Clad in bamboo and elevated by a distinctive aluminium frame, the Aurora’s design is striking. It mimics the grand scale of Japanese architecture – crisp, clean lines intertwined with a hint of vintage. Very fitting for the tour de force that is our premium wireless music system – Aurora. Music amplified by emotion Aurora is driven by PureEmotion®, an ingenious fusion of amp technologies – brand new and original to iFi. It delivers a sound that combines the purity of tone with a high level of engagement, speed and dynamic gusto, ensuring the emotive quality of music is delivered in full effect – which is why we call it PureEmotion®. Analogue. Authentic. Many audio products use digital signal processing (DSP) to deliver a big, spacious sound from a single box. This is an artificial, lossy process that detracts from the sound quality. The clever technologies in the Aurora (and all iFI products), avoid this completely as they operate in the analogue domain. SoundSpace® delivers a room-filling sound and gives the music a sense of scale and space you would a premium audio system. TrueBass® delivers genuine bass with depth and definition. Everything from timpani to a bass guitar is conveyed with power and poise. No space too big or small With Auto Room Tailoring (ART)®, the Aurora can auto-configure the speaker array according to its position in the room. The effect is similar to the adjustments made by a sound engineer at a live venue. And what makes ART® special is that it’s executed in the analogue domain. Forget tinny and imagine deep, voluminous sound that captivates you. To our ears, no other music system with automatic room correction comes close. Versatile. Enjoy premium streaming services from Qobuz and TIDAL or standard streams from the likes of Spotify. Aided by ART®, the Aurora adapts to the way you want to use it. It’s YOUR premium network music player. Place it under a TV, connect via Bluetooth® or optical cable and use it as a stylish soundbar. And stream your favourite music. Link several Auroras via Wi-Fi to create a multi-room system, playing in sync or individually. Whether you’re streaming from a premium music service or surfing the infinite number of internet radio stations via TuneIn, the Aurora has your music needs covered. Barnstorming Bluetooth Aurora uses Bluetooth5.0® — the very latest version with the newest Qualcomm 5100 series chipset. There’s also the super-smooth ESS Sabre DAC chip. All current and future Bluetooth® audio formats are supported including aptX and aptX HD, aptX Low Latency, aptX Adaptive, LDAC and HWA/LHDC, hi-res Bluetooth® codecs created by Sony and Huawei respectively. Also, we have  Apple’s favoured format, AAC. Every codec is covered at the highest resolution Bluetooth® specification. It’s the only premium Bluetooth music system you need. Future-proofed. In addition to wireless connectivity there’s plenty of cable inputs — optical, coaxial, USB and Ethernet inputs cater for digital sources, while a 3.5mm socket provides an Alexa/analogue input. There is even a slot for audio stored on micro SDHC cards. Aurora, with its awe-inspiring sound sustainable bamboo design, is a truly stunning addition to any home. No other premium all one system wireless music system looks or sounds this good. Once you’ve heard it, we’re sure you will agree – She’s Electric.

High-resolution Bluetooth DAC. Chill. Relax. Enjoy. The ZEN Blue V2 is the same hi-res DAC you know and love but better! We’ve added an improved Bluetooth® antenna that will increase range by up to 80%. Just add a smartphone, tablet, PC or Mac to the ZEN Blue V2. And chillax. Whether you’re into Spotify, Amazon, Apple Music, Qobuz or Tidal, the ZEN Blue V2 will deliver fabulously flawless music to suit your mood via breathtaking hi-res Bluetooth. Hi-res to the nth degree. All current and future Bluetooth audio formats are supported. This includes Qualcomm’s aptX and aptX HD, aptX Low Latency, aptX Adaptive, LDACand HWA/LHDC, hi-res Bluetooth codecs created by Sony and Huawei respectively, AAC, Apple’s favoured format and SBC, the standard Bluetooth codec. This means every possible source device is covered, at the highest resolution Bluetooth specification. And future codecs can be added with Over the Air updates. Not all Bluetooth is created equal. Have utter confidence in the sound quality of the ZEN Blue V2. It uses Bluetooth5.0, the very latest version, and the newest Qualcomm 5100 chip to process all incoming Bluetooth data. The ESS Sabre DAC chip is there to ensure an extremely smooth digital to analogue conversion. Banish standard ‘Bluetooth Blues’ with the ZEN Blue V2. Enjoy. Your way. Chill with the best of both worlds. Analogue – connect via RCA to amps or active speakers or via the 4.4mm output to amps/speakers with a balanced input. Digital – use the optical and coaxial connections to connect to anything with a built-in DAC and corresponding digital input – your TV, an AV amp or an external DAC in your hi-fi set-up. Balanced design is truly special. The analogue output stage is balanced, not normally seen in DACs at this price point. Balanced means less noise, interference/crosstalk. It has RCA and balanced outputs at HiFi standard level; 2V SE and 4V BAL and  is therefore compatible with both HiFi and Pro systems. All underpinned by high-quality circuit components such as C0G capacitors from TDK and it’s fed by a precision low-noise power supply from Texas Instruments to make this a rare entry-priced beastie. Plus we’ve improved our Global Master Timing (GMT) clock circuitry to give you an even smoother musical ride. It means >20db better performance for even more ZEN.

Let the Air in.Enjoy unbeatable HD Bluetooth streaming from your phone, tablet or computer.Get maximum sound quality from Bluetooth audio with the ZEN Air Blue.The ZEN Air Blue is a high-quality Bluetooth audio receiver.It converts Bluetooth audio streams from smartphones, computers or tablets into an audio stream suitable for headphones, amplifiers and active speakers (speakers that run on their own DC power).Hear the differenceThe ZEN Air Blue will give you the maximum sound quality from your device – your smartphone, computer or tablet – as it operates at the highest audio resolution level of any Bluetooth system.The Bluetooth system inside has been upgraded by iFi to avoid the 40% drop in audio quality you typically experience with standard Bluetooth (compared to wired audio).It’s the ideal way to wirelessly connect your smart device to a sound system in super hi-res (high resolution).Effortless. Easy.The ZEN Air Blue is ideal as part of a simple, new set-up for someone just starting out in audio who wants to experience the high quality of music streaming apps like Apple Music, Tidal and Qobuz.Just connect your laptop, smartphone or tablet to the ZEN Air Blue via Bluetooth and connect the ZEN Air Blue to your amplifier or active speakers via the RCA connections at the back.Compatibility. Covered.The ZEN Air Blue supports any current Bluetooth stereo audio codec (signal) available on the market today.AAC – better than SBC, widely used, found in Apple devicesaptX HD, aptxLL and aptX Adaptive – variations on an improved aptXaptX – better than SBC, widely used, found in Android devicesLDAC – extremely high quality, designed by SonyLHDC – extremely high quality, designed by HuaweiSBC – standard Bluetooth used by most audio devicesWhatever device you are are using for streaming music via Bluetooth, we’ve got you covered.HD quality streamingIt’s also an easy, reliable way to add Bluetooth streaming to an existing set-up or upgrade the sound quality of any speaker or system that uses standard Bluetooth.Bluetooth v5.1 compliantExcellent wireless rangeSuperb stabilitySmooth performanceLet the Air into your system and blow the cobwebs away.

DAC + CAN + 4.4 cable = ….a fantastic desktop-sized headphone system for both digital and analogue sources. The ‘ZEN Signature Set’ comprising both the ZEN DAC Signature and ZEN CAN Signature 6XX is now available. This set includes a high-performance 4.4mm Pentaconn cable to connect them together. ZEN DAC Signature This ZEN DAC Signature is  a pure DAC and benefits from true-differential balanced circuit design to take performance to the next level. It has upgraded circuit components and short, direct signal paths for optimal signal purity. It delivers bit-perfect PCM (up to 32-bit/384kHz), native DSD (up to DSD256), DXD and MQA. There is a pair of RCA sockets for single-ended connection to an amp, plus a Pentaconn 4.4mm output. When connected to an amp or active speakers equipped with a balanced input – either a 4.4mm Pentaconn input, or stereo XLR inputs via a 4.4mm-to-XLR cable – the full benefit of the ZEN DAC Signature’s balanced circuit design can be heard. It’s outputs can be switched between ‘variable’ and ‘fixed’. ZEN CAN Signature The ZEN CAN Signature 6XX improves the sound quality of the original ZEN CAN and adds something special – a custom EQ setting called ActivEQ. It combines active and passive components to create a specific EQ curve to suit the ‘MassDrop x Sennheiser HD 6XX’ headphones. This can be switched off to make the most of all manner of headphones and in-ear monitors. It also features XSpace – an analogue processing mode which compensates for the ‘in-head localisation’ effect that can occur when using headphones to listen to music that was mixed using a pair of speakers. It features four gain settings in six dB steps – 0dB, 6dB, 12dB and 18db. The ZEN CAN Signature 6XX’s circuitry is a balanced, symmetrical dual-mono design. It delivers delivers 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 300 ohms or more through the balanced output. It offers stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Pentaconn input. A 4.4mm balanced output is also provided. It has a 6.3mm output for headphones that have a standard single-ended connector and a 4.4mm Pentaconn balanced output for headphones offering balanced connection. 4.4mm – 4.4mm cable The iFi 4.4mm to 4.4mm cable employs heavy OFHC continuous cast copper and silver matrix conductors with a total thickness of 14AWG for the best signal transfer. It’s a perfect addition to our ZEN Signature Set as this audiophile-grade cable will give you maximum quality balanced signal transfer and minimum interference. The cable construction is a custom helix design, minimised both in capacitance and inductance, minZ™. It also has intrinsic shielding provided by minZ™ helix construction. They protect the cable from RFI and EMI noise and provide the cleanest transfer medium possible. To further insulate the cable, we adopted the RoHS compliant, excellent dielectric property and super-soft (60P) HD polymer with 1500V AC spark resistance.

Balanced system. Complete. Custom connectors. Silver. Copper. Fantastic 4. The iFi 4.4mm to 4.4mm cable employs heavy OFHC continuous cast copper and silver matrix conductors with a total thickness of 14AWG for the best signal transfer. Whether you are connecting our ZEN series or other balanced components, our audiophile-grade cable will enhance your listening. It has been created to give you maximum quality balanced signal transfer and minimum interference. Shields to max. The cable construction is a custom helix design, minimised both in capacitance and inductance, minZ™. It also has intrinsic shielding provided by minZ™ helix construction. They protect the cable from RFI and EMI noise and provide the cleanest transfer medium possible. To further insulate the cable, we adopted the RoHS compliant, excellent dielectric property and super-soft (60P) HD polymer with 1500V AC spark resistance. 4N Oxygen- free copper ultimate conductivity and corrosion resistance. 5N Platinum pure silver minimal skin effect and impeccable audio signal transmission. RoHS compliant super-soft polymer for protection. Making it a multiple channels shielded cable. Braided for low-resistance path to ground. iFi’s own smooth surface connector and copper edge cut in a sharp angle to protect the 4.4 socket and extend lifetime. 1mm raised lip for precise connection.

Fall in love with your LPs all over again. Pedigree. Performance. Peerless. LPs + ZEN = Magical combo. You’ve spent years building your dream LP collection. We know because we have done the same! The ZEN Phono is a wonderful enhancement to your vinyl setup. It will max out every MM/MC cartridge. Choc full of AMR/iFi trickle-down vinyl technology, it will have you poring over your LPs into the wee, small hours. Spec’d to make you smile Unlike any other entry-level phono stage. The ZEN Phono has: MM/MC from 36dB >72dB gain. Super-silent noise floor -151dBV Precise RIAA with Balanced output, performance comparable to +$1k phono stages  AI sub-sonic filter. Addresses warp without eliminating bass or causing phase issues Hissless whisper Flagship phono amplifiers create their own power supply off the mains, like a mains regenerator. This is fundamental to a well-designed phono stage. Without this, it will struggle to amplify the signal without added noise. This is why phono stages ‘hiss’ so annoyingly. Unusually, the ZEN Phono has its own high-tech clean power supply. It creates a 1.2MHz power supply (20,000x mains frequency of 60Hz). In this circuit, a 10uF filtering capacitor = 200,000uF at lower, audible frequencies. With serious levels of noise filtration, it performs at the level of well-designed LC filtering circuits as found in classic tube amplifiers. Further, located on its own ‘island’ PCB, it is isolated so there is no noise pollution of the analogue stage. Just super clean +/- 12V DC. Measured EIN (Equivalent Input Noise) is -151dBV. It is 20dBV quieter than some Stereophile Class A+ phonos which are -131dBV. Mil-spec RIAA The EQ circuit uses multiple TDK C0G capacitors in parallel. This is for best stability and the least distortion. They beat polystyrene capacitors and are close to Teflon. With great circuit comes great components The ZEN Phono has some seriously good audio components backing up the fab circuit design which has trickled-down from its ultra-fidelity AMR PH-77 and iFi iPhono siblings. Scroll down for more on the most consequential circuit highlights/boutique components. Super sub-sonic The intelligent sub-sonic filter is from the iPhono range and is quite special. Normal sub-sonic filters remove ‘rumble’ AND bass and cause phase issues. Our unique AI phono sub-sonic filter removes ‘rumble’ only. With MM/MC, high/low and very low, the ZEN Phono is able to handle just about any cartridge. From 36dB all the way up to 72dB. So as your vinyl system grows over time, the ZEN Phono will always keep up. Balanced circuit design. Just not seen at this price point it is a superior method to the traditional single-ended circuit approach. Balanced circuits reduce noise and crosstalk. Less Interference – clearer sound. As with many other iFi audio products, we’ve incorporated a custom OV Series operational-amplifier. This top-notch component contributes to the extremely low noise, low distortion (0.0001%) and wide bandwidth. Panasonic ECPU capacitors. Each ECPU capacitor is constructed from some 3,500 layers of ultra-thin dielectrics less than 0.5μm thickness. It offers class-leading Equivalent Series Resistance (ESR), low impedance and frequency stability and vanishingly low distortion. Texas Instruments low-noise ICs offer great unity-gain bandwidth, very low noise and distortion, high output drive capability, Common-mode and Power Supply Rejection Ratios of over 100 dB, wide maximum-output-swing bandwidths and high slew rates. TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications. They are pricey but are a perfect addition to our products. muRata control-type, low-ESR high-Q multi-layer capacitors. The ‘ESR control’ aspect of the Murata is something special. Their noise suppression abilities are impressive. Already using the lowest tolerance capacitors combined with multiples in parallel, tolerance is exponentially improved by the square root of the number of capacitors. This is quite a natty circuit design. The RIAA EQ tolerance level (+/- 0.15dB) is impressive as it is en par with hand-selected capacitors!

There’s something in the Air.Our super affordable phono stage makes your vinyl sound purer than ever.Enjoy a purer listening experience with the ZEN Air Phono, our super affordable phono stage.A phono stage, also called a phono pre-amp, provides the connection between the record cartridge/pickup (stylus) and the amplifier.Turntable cartridges output a very small signal. This signal needs amplifying up to several hundred times the original size before it is loud enough for your amplifier. A phono stage increases the signal level from millivolts to volts.When vinyl was the standard for audio recording, the phono stage was built-in to receivers and amps, allowing direct connection of a turntable. These days most receivers and amps do not contain a phono stage so a separate unit is needed.It is a necessity for any turntable without a phono stage already built in. It will also upgrade a basic built-in phono stage in a turntable or amplifier system.Purer stillListening to music on vinyl is good for the soul. It sounds purer than listening to a track via your phone or computer.Make this experience purer still by reducing hiss, noise and rumble on your records with the ZEN Air Phono.MC and MMThere are two kinds of turntable cartridge – Moving Magnet and Moving Coil – and the ZEN Air Phono works with both of them.The MM setting is for cartridges with an output voltage of 2mV and higher.The MC setting for outputs less than 2mV.You use the gain switch on the rear to change this setting.It also has a precise RIAA equalisation setting to satisfy the most demanding vinyl lover.Engage warp driveAs we all know, records can become warped with age. With the ZEN Air Phono any warp on your records will be driven away by our ‘subsonic filter’.Normal subsonic filters remove ‘rumble’ AND bass and cause phase issues.Our unique AI phono sub-sonic filter removes ‘rumble’ only.

Connecting to your Android device with a cable should provide a decent connection. But what if it could be even better?  iFi’s audiophile grade OTG cables provide a super stable connection that supplies superior sound. On-the-go iFi understand the need for quality in every single component of your system. On-the-go (OTG) cables should be no exception. If fact, these actually need extra care and attention. Their very name suggests they will suffer more wear and tear than if they were sat at home! Simply the best OTG cables go between your phone and your DAC. We produce both the USB C and the micro version. They transfer the digital signal from your phone into your DAC. This connection must be stable. That’s why we use a USB 3.0 ‘A’ female connector. It is proven to be a much more mechanically reliable connection. We believe you guys deserve the best, even in the small stuff. Superior signal We also make our cables from top-notch materials. They are constructed from pure OFHC continuous cast copper – an excellent conductor – to deliver a superior, clean signal from your phone to your DAC. This, is turn, delivers the best sound to you to keep you and your music on-the-go, go, go! Perfect for use with Android phones. Our OTG cables extract a digital signal with ease. We offer both micro USB and USB C options. The USB C version is 3.0 standard. The USB 3.0 ‘A’ female connector provides a much more mechanically reliable connection, a factor that not many manufacturers take into account. This fits directly into a flat Type A USB port of the micro or nano iDSD Black Label and ensures a strong and steady audio connection. Our audiophile grade OTG cables are constructed from pure OFHC continuous cast copper, which conducts clean sound between your Android and DAC. And it’s not just the insides that get the iFi treatment. The cables are not only sonically superior but also super smart looking with a sexy ceramic finish to add that touch of class.

Use an iPower to replace your regular power supply for clean, noise pollution free power. Upgrade to the iFi iPower to feed your system’s circuits with clean, audiophile grade power and address issues at both the output and input stages. The iPower use Active Noise Cancellation+ to cancel all incoming EMI or RFI noise. It is at least 10x quieter than previous iFi power adapters, 20x quieter than audiophile linear power supplies and 1000x quieter than standard SMPS wall adapters. It has 4 barrel-tip adapters which means it’s compatible with all wall pin types across the world (UK/US/EU/AU). A true-globe trotter. It also comes with USB and centre negative adapters. Add the iPower into your system and you’ll notice music come back to life. It can add in detail originally lost through conventional power supplies. Get your power back with the iFi iPower. It works with virtually any DC powered device and comes in 5, 9, 12 and 15 volts. Just check the correct voltage and away you go. Clean, audiophile grade power.

Use an iPower to replace your regular power supply for clean, noise pollution free power. Upgrade to the iFi iPower to feed your system’s circuits with clean, audiophile grade power and address issues at both the output and input stages. The iPower use Active Noise Cancellation+ to cancel all incoming EMI or RFI noise. It is at least 10x quieter than previous iFi power adapters, 20x quieter than audiophile linear power supplies and 1000x quieter than standard SMPS wall adapters. It has 4 barrel-tip adapters which means it’s compatible with all wall pin types across the world (UK/US/EU/AU). A true-globe trotter. It also comes with USB and centre negative adapters. Add the iPower into your system and you’ll notice music come back to life. It can add in detail originally lost through conventional power supplies. Get your power back with the iFi iPower. It works with virtually any DC powered device and comes in 5, 9, 12 and 15 volts. Just check the correct voltage and away you go. Clean, audiophile grade power.