. go to top icon

Ortofon

Όλα τα προϊόντα Ortofon

Φίλτρα
48  Προϊόντα
Σελ
από 2

Ανταλλακτική βελόνα για την κεφαλή 2M Bronze.

299 €
36 Δόσεις 10,32€ / μήνα
Κατόπιν Παραγγελίας

Ανταλακτική βελόνα για την κεφαλή της ortofon DJ s

55 €
36 Δόσεις 1,90€ / μήνα
Κατόπιν Παραγγελίας

Ανταλακτική βελόνα για την κεφαλή της ortofon Concorde Mix MKII

39 €
36 Δόσεις 1,35€ / μήνα
Κατόπιν Παραγγελίας

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

148 €
36 Δόσεις 5,11€ / μήνα
Κατόπιν Παραγγελίας

The 2M Black is an amazing cartridge and by many considered the ultimate in moving magnet. So, why would we attempt to create something even better? Because perfection runs in our blood. The 2M Black LVB 250 upgrades the great build of the 2M Black with a boron cantilever and our very own Nano Tube suspension system. The result is a sound so precise and so detailed that you feel like you have let the artist into your house and have them playing right in your living room.Features:
The 2M Black LVB 250 uses a Nude Shibata diamond on a Boron cantilever, the combination known from the acclaimed MC Cadenza Black cartridge. The use of an extremely stiff and lightweight Boron cantilever adds remarkable transparency, speed and responsiveness. The Nude Shibata stylus’ slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the highest frequencies. The 2M Black LVB was released to commemorate the 250th anniversary of the birth of Ludwig van Beethoven in December 2020.

1.059 €
36 Δόσεις 36,56€ / μήνα
Κατόπιν Παραγγελίας

The 2M Black is an amazing cartridge and by many considered the ultimate in moving magnet. So, why would we attempt to create something even better? Because perfection runs in our blood. The 2M Black LVB 250 upgrades the great build of the 2M Black with a boron cantilever and our very own Nano Tube suspension system. The result is a sound so precise and so detailed that you feel like you have let the artist into your house and have them playing right in your living room.Features:
The 2M Black LVB 250 uses a Nude Shibata diamond on a Boron cantilever, the combination known from the acclaimed MC Cadenza Black cartridge. The use of an extremely stiff and lightweight Boron cantilever adds remarkable transparency, speed and responsiveness. The Nude Shibata stylus’ slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the highest frequencies. The 2M Black LVB was released to commemorate the 250th anniversary of the birth of Ludwig van Beethoven in December 2020.

999 €
36 Δόσεις 34,49€ / μήνα
Κατόπιν Παραγγελίας

The LH-6000 is a high quality headshell is recommended for the MC Windfeld Ti and the Cadenza Series. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.

109 €
36 Δόσεις 3,76€ / μήνα
Κατόπιν Παραγγελίας

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

65 €
36 Δόσεις 2,24€ / μήνα
Κατόπιν Παραγγελίας

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

310 €
36 Δόσεις 10,70€ / μήνα
Κατόπιν Παραγγελίας

Η Ortofon Concorde MkII Club διαθέτει τις καλύτερες προδιαγραφές και τον καλύτερο ήχο, καθιστώντας την ιδανική επιλογή για DJ σε οποιοδήποτε περιβάλλον: στούντιο, εκπομπή ή club. Η ειδικά ελλειπτική γραφίδα ταιριάζει καλύτερα στην αυλάκωση και επομένως έχει περισσότερη περιοχή επαφής με την αυλάκωση, εξάγοντας πιο περίπλοκες λεπτομέρειες. Η τάση εξόδου 8 mV της CLUB απαιτεί μικρότερο κέρδος από τους προενισχυτές, παρέχοντας καθαρότερη αναπαραγωγή ήχου και λιγότερη ευαισθησία στην ανάδραση σε ζωντανό περιβάλλοντα.

169 €
36 Δόσεις 5,83€ / μήνα
Κατόπιν Παραγγελίας

The Concorde ELITE is a premium Moving Magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Owing to the number of components' upgrades, the ELITE achieves a new level of sound quality, not previously found in the DJ categorized cartridges.

299 €
36 Δόσεις 10,32€ / μήνα
Κατόπιν Παραγγελίας

The Concorde ELITE is a premium Moving Magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Owing to the number of components' upgrades, the ELITE achieves a new level of sound quality, not previously found in the DJ categorized cartridges.

449 €
36 Δόσεις 15,50€ / μήνα
Κατόπιν Παραγγελίας

Ortofon aspires to provide the ultimate musical experience through a mixture of innovation, technical expertise and inspiration. This new state of the art phono cartridge, representative of numerous Ortofon design elements and ideals, is truly exemplary of the highest degree of performance possible in contemporary analogue playback technology. For the new MC Diamond cartridge, the Ortofon Wide Range Damping System (WRD) has been re-engineered to include an enhanced rubber suspension, specially developed in-house. The WRD system was originally introduced in the MC 20 Mk II in 1979 and was also subsequently used in the MC A90, MC Windfeld, Xpression, MC Anna, MC Anna Diamond and MC Century phono cartridges. In this system, a small, heavy platinum disc is sandwiched between two rubber absorbers, both with different properties. This ensures not only an exceptional tracking performance, but also creates a perfect damping through the entire frequency spectrum. Because of this, distortion and resonance are virtually eliminated entirely.The new rubber compound formula is based on the Multi Wall Carbon Nano Tube (MWCNT) highly efficient nano filler. The new MWCNT-based compound offers desirable mechanical properties, which allow for optimal interaction between compliance and damping, that improves stability and playback and ensures unparalleled sound quality.The cartridge body of the MC Diamond is made of titanium using our custom Selective Laser Melting (SLM) technique. This technique allows for precise control of the density of the body, which provides extremely high internal damping, and results in a significant reduction in vibrations and enhanced sound quality.
Magnet System
The MC Diamond’s magnet system combines choice materials, optimized geometry, and unrivaled consistency that deliver unmatched performance. Together with the non-magnetic armature, the result is vivid, highly-accurate audio reproductions defined by nearly boundless dimensionality.Replicant 100 Diamond
The MC Diamond makes use of Ortofon Replicant 100 diamond. This Line Contact type stylus distinguishes itself by having a narrow and long contact surface, which is as close as possible to the original cutting stylus. This ensures the most accurate reproduction, lowest distortion and extended frequency range.
NB: The stylus guard provided for the MC Diamond is designed to be easily replaced and removed without risking contact to the fragile stylus assembly. To avoid accidental damage to the stylus or cantilever please mount the enclosed stylus guard onto the cartridge whenever the cartridge is not in use. The stylus guard should also be attached during mounting or removal of the cartridge.Diamond cantilever
The MC Diamond uses a solid Diamond Cantilever that, in combination with Ortofon Replicant 100 diamond, offers extreme transparency, speed, and responsiveness beyond any other combination. A solid Diamond cantilever provides the best possible interface between the stylus and armature, owing to its hardness and crystal structure. The improvements found in the use of a Diamond cantilever have redefined the boundaries of analogue reproduction, presenting greater inner detail, subtlety, and depth like never before.

7.950 €
36 Δόσεις 274,46€ / μήνα
Κατόπιν Παραγγελίας

Those who choose to adopt the MC Windfeld Ti will experience the lifelike, dynamic and open sound, with exceedingly clear midrange. The MC Windfeld Ti remains extremely musical while paying close attention to micro dynamic details, with its delicate, but also analytical nature.Our extensive knowledge of vibration properties, characteristics in different shapes and materials, competences in magnetism, mechanical design and new technologies has been applied for optimization of the MC Windfeld model. The MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.At the heart of the MC Windfeld Ti lies Selective Laser Melting technology, apllied for manufacturing of the Ortofon Exclusives Series cartridges. The use of Titanium in the MC Windfeld Ti has provided a further improvement to the overall rigidity of the structure and the cartridge weight. Obviously, MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.

4.279 €
36 Δόσεις 147,73€ / μήνα
Κατόπιν Παραγγελίας

Description An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

8 €
36 Δόσεις 0,28€ / μήνα
Κατόπιν Παραγγελίας

Η DJ Stylus είναι ανταλλακτική βελόνα για τις κεφαλές concorde mk II DJ. Βελόνα σφαιρική πολύ καλής ποιότητας, με σταθερό cantilever. Η αντικατάσταση της βελόνας είναι μια άνετη και με ασφαλή εφαρμογή.

42 €
36 Δόσεις 1,45€ / μήνα
Κατόπιν Παραγγελίας

Σφαιρική κεφαλή και βελόνα με εξαιρετική διαχείριση groove. Iδανική για κάθε είδος μουσικής.

129 €
36 Δόσεις 4,45€ / μήνα
Κατόπιν Παραγγελίας

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

85 €
36 Δόσεις 2,93€ / μήνα
Κατόπιν Παραγγελίας

Ανταλλακτική βελόνα για τις Ortofon Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, Concorde STD, TM 10H, LMB 12, SMB 12, LMA 12. Frequency range: 20-24.000 Hz Frequency response: 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force*): 70 µm Compliance, dynamic, lateral: 25 µm/mN Stylus type: Elliptical Stylus tip radius: r/R 8/18 µm Tracking force range: 1.25-1.75 g (12.5-17.5 mN) Tracking force, recommended: 1.5 g (15 mN) Tracking angle: 20° Stylus colour: Black

69 €
36 Δόσεις 2,38€ / μήνα
Κατόπιν Παραγγελίας

Η Concorde DJ θεωρείται το jack-of-all-trades, με επακριβή αναπαραγωγή ήχου και εξαιρετική διαχείριση του αυλακιού του δίσκου. Η DJ είναι ιδανική για κάθε είδος μουσικής. Έχει μια σφαιρική γραφίδα αναγνωσης (βελόνα) και ένα εξαιρετικά ισορροπημένο πρόβολο που παρέχει εξαιρετική ακαμψία. Η κεφαλή δεν έχει μόνο την ικανοποιητική δυνατότητα παρακολούθησης, παρέχει επίσης στους DJs την πιο απαιτητική αυστηρή ανάγνωση με πολύ χαμηλή φθορά του βινύλιου σας. Συνολικά η βελτιωμένη παρακολούθηση της ανάγνωσης, παράλληλα με ακριβή αναπαραγωγή του ήχου και εξαιρετική διαχείριση του αυλακιού του δίσκου. Παρέχει εξαιρετική απόδοση και ανθεκτικότητα σε ημιεπαγγελματικά και επαγγελματικά πικάπ. Σε συσκευασία 2 τεμαχίων.

239 €
36 Δόσεις 8,25€ / μήνα
Κατόπιν Παραγγελίας

Phono cartridge for turntables Audiophile vinyl enjoyment because pure silver offers crystal clear performance!2M series uses Ortofons own technology, that allows to reach same levels of flat frequency response than Moving Coil cartridges. 2M Silver combines these technologies with ultimate simple mounting procedure for nearly all available turntables. Due to MM principle, 2M cartridges are compatible with most phono preamplifiers. An absolutely feature unique in this price range, 2M Silver uses internal silver plated copper coils, which guarantees outstanding sonic results! Features : Moving Magnet principle Silver plated copper coils windings to achieve higher quality and more dynamic playback compared with conventional MM cartridges Suitable for low to medium tonearm masses 1/2 inch mounting standard High trackability 2M Silver should be connected to phono MM inputs As with most MM cartridges, stylus may be exchanged Specifications : Weight 7.2 g Stylus type elliptical Stylus tip radius 8 x 18 µm Frequency response 20 - 25.000 Hz Output voltage 5.5 mV Channel separation >25dB @ 1kHz Compliance dynamic/lateral 20/20 µm/mN Auflagekraftbereich 1.6-2,0 g Recommended tracking force 1.8 g Trackability (315 Hz, lateral) >70 µm Tracking angle 20° Internal inductance 700 mH Recommended load resistance 47 kΩ

99 €
36 Δόσεις 3,42€ / μήνα
Κατόπιν Παραγγελίας

The OM 5S is a moving magnet cartridge for general purpose applicationIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g. Styli types and interchangeabilityBy adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 12 dB Frequency range at - 3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

49 €
36 Δόσεις 1,69€ / μήνα
Κατόπιν Παραγγελίας

The Super OM 5E major improvements: 1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion. 2. Slit less than 1 mm dia. hollow pole pins significantly reduces eddy current losses caused by magnetic hysteresis. This technology extends the frequency range and improves phase linearity. 3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances. Optimal fit and sound reproductionIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g. Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion. Styli types and interchangeabilityThe OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4 mV Channel balance at 1 kHz - 1.5 dB Channel separation at 1 kHz - 22 dB Channel separation at 15 kHz - 15 dB Frequency range at - 3dB - 20-25.000 Hz Frequency response - 20-20.000 Hz ± 2 dB Tracking ability at 315Hz at recommended tracking force - 65 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Elliptical Stylus tip radius - r/R 8/18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 1 kOhm Internal inductance - 580 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

75 €
36 Δόσεις 2,59€ / μήνα
Κατόπιν Παραγγελίας

The Super OM 5E major improvements: 1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion. 2. Slit less than 1 mm dia. hollow pole pins significantly reduces eddy current losses caused by magnetic hysteresis. This technology extends the frequency range and improves phase linearity. 3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances. Optimal fit and sound reproductionIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g. Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion. Styli types and interchangeabilityThe OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4 mV Channel balance at 1 kHz - 1.5 dB Channel separation at 1 kHz - 22 dB Channel separation at 15 kHz - 15 dB Frequency range at - 3dB - 20-25.000 Hz Frequency response - 20-20.000 Hz ± 2 dB Tracking ability at 315Hz at recommended tracking force - 65 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Elliptical Stylus tip radius - r/R 8/18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 1 kOhm Internal inductance - 580 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

89 €
36 Δόσεις 3,07€ / μήνα
Άμεσα Διαθέσιμο

The OM 5S is a moving magnet cartridge for general purpose applicationIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g. Styli types and interchangeabilityBy adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 12 dB Frequency range at - 3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

59 €
36 Δόσεις 2,04€ / μήνα
Κατόπιν Παραγγελίας

Specifications : Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17,5 mN) Tracking angle - 20° Stylus colour - Black

47 €
36 Δόσεις 1,62€ / μήνα
Κατόπιν Παραγγελίας

Perfect for usage in discotheques and clubs: provides the best possible sound quality available in a DJ cartridge! Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables. Using the cartridge for the first time feels like striking gold. It is indeed the flagship product with its gold plating and special Pro E diamond. The Gold enjoys an excellent reputation for its amazing sound quality. Available only with an elliptical stylus, the Concorde Gold is for DJs who will settle for nothing but the very best!Χαρακτηριστικά:Output voltage at 1000Hz, 5cm/sec. -   6 mVChannel balance at 1kHz  -  1,5 dBChannel separation at 1kHz  -  23 dBChannel separation at 15 kHz  -  15 dBFrequency range at -3dB  -  20-22.000 HzFrequency response  -  20-20.000 Hz +/- 2dBTracking ability at 315 Hz at recommmended tracking force  -  80 μmCompliance, dynamic lateral  -  7 μm/m NStylus type -   Special EllipticalStylus tip radius -   r/R 13/25 μmTracking force range  -  2,0-5,0 g (20-50 mN)Tracking force recommended  -  3,0 g (30 mN)Tracking angle  -  20°Internal impedance, DC resistance -   750 OhmInternal inductance  -  450 mHRecommended load resistance  -  47 kOhmRecommended load capacitance  -  200-600 pFCartridge weight  -  18,5 g​

75 €
36 Δόσεις 2,59€ / μήνα
Κατόπιν Παραγγελίας

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Χαρακτηριστικά:Output voltage at 1 kHz 5 cm/sec : 0,45 mVChannel balance : < 1,5 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at -3 dB : 20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz : +3/-1Tracking ability at 315 Hz at recommended tracking force : 80 μmCompliance, dynamic, lateral : 12 μm/mNStylus type : Nude Fine Line on Alu cantileverStylus tip radius : r/R 8/40Tracking force range : 2,2-2,7 g (22-27 mN)Tracking force recommended : 2,5 g (25 mN)Tracking angle : 20ºInternal impedance, DC resistance : 5 OhmRecommended load impedance : 50-500 OhmCartridge body material : Stainless steel AluminiumCartridge colour : Red/Black Cartridge weight : 10,7 g

329 €
36 Δόσεις 11,36€ / μήνα
Κατόπιν Παραγγελίας

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Χαρακτηριστικά:Output voltage at 1 kHz 5 cm/sec : 0.3 mVFrequency range at -3 dB : 20-25.000 HzFrequency response 20 Hz - 20 kHz : +/-2.0 dBTracking ability at 315 Hz at recommended tracking force : 70 μmCompliance, dynamic, lateral : 15 μm/mNStylus type : Nude EllipticalStylus tip radius : r/R 8/18 μmTracking force range : 2.1-2.5 g (21-25 mN)Tracking force recommended : 2.3 g (23 mN) Quintet SideMono01Tracking angle : 20ºInternal impedance, DC resistance : 5 OhmRecommended load impedance : >20 OhmCartridge body material : ABS/AluminiumCoil wire material : Pure 4-nines silverCartridge colour : WhiteCartridge weight : 9 g 

439 €
36 Δόσεις 15,16€ / μήνα
Κατόπιν Παραγγελίας

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Χαρακτηριστικά:Output voltage at 1 kHz 5 cm/sec : 0,5 mVChannel balance : < 1,2 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at -3 dB : 20 Hz - 50 kHzFrequency response 20 Hz - 20kHz : +2/-1Tracking ability at 315 Hz at recommended tracking force : 80 μmCompliance, dynamic, lateral : 12 μm/mNStylus type : Nude FG 70 on Ruby cantileverStylus tip radius : r/R 6/70Tracking force range : 2,2-2,7 g (22-27 mN)Tracking force recommended : 2,5 g (25 mN)Tracking angle : 20ºInternal impedance,DC resistance : 5 OhmRecommended load impedance : 50-200 OhmCartridge body material : Stainless steel Aluminium

499 €
36 Δόσεις 17,23€ / μήνα
Κατόπιν Παραγγελίας

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Χαρακτηριστικά:Output voltage at 1000 Hz, 5cm/sec. : 0.3 mVChannel balance at 1 kHz : < 1.2 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at - 3dB : 20-25.000 HzFrequency response 20-20.000 Hz : +/-1.5 dBTracking ability at 315Hz at recommended tracking force : 80 µmCompliance, dynamic, lateral : 15 µm/mNStylus type : Nude Fine LineStylus tip radius : r/R 8/40 µm Quintet SideBronze02Tracking force range : 2.1-2.5 g (21-25 mN)Tracking force, recommended : 2.3 g (23 mN)Tracking angle : 20°Internal impedance, DC resistance : 5 OhmRecommended load impedance : > 20 OhmCartridge body material : ABS/AluminiumCoil wire material : Pure 4-nines copper

699 €
36 Δόσεις 24,13€ / μήνα
Κατόπιν Παραγγελίας

The Ortofon Quintet moving coil cartridge system for high performance sound reproduction of your favourite analogue records! Ortofon has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been engineered and manufactured. Reflecting our extensive experience in industrial design and technological knowhow we have become the global leader in the manufacture and supply of phono cartridges.The Quintet Series has been engineered in accordance with the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Each of the five Quintet Series cartridges has its individual sonic expression, and all five models together represent the ensemble of five classic variations:Χαρακτηριστικά:Output voltage at 1000 Hz, 5cm/sec. : 0.3 mVChannel balance at 1 kHz : < 1.0 dBChannel separation at 1 kHz : > 23 dBChannel separation at 15 kHz : > 15 dBFrequency range at - 3dB : 20 - 25.000 HzFrequency response 20-20.000 Hz : +/- 1.5 dBTracking ability at 315Hz at recommended tracking force : 80 µmCompliance, dynamic, lateral : 15 µm/mNStylus type : Nude Shibata on Boron cantileverStylus tip radius : r/R 6/50 µmTracking force range : 2.1-2.5 g (21-25 mN) Quintet SideBlack01Tracking force, recommended : 2.3 g (23 mN)Tracking angle : 20°Internal impedance, DC resistance : 5 OhmRecommended load impedance : > 20 OhmCartridge body material : ABS/AluminiumCoil wire material : Aucurum

949 €
36 Δόσεις 32,76€ / μήνα
Κατόπιν Παραγγελίας

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.No matter what the application, the Pro S provides remarkable versatility for virtually any setting. The sound quality is absolutely not to worry about. 

29 €
36 Δόσεις 1,00€ / μήνα
Κατόπιν Παραγγελίας

Βραχίονας Static 9'' Resonance optimaizedΠροδιαγραφές: Effective mass without headshell 3.5 gMass of supplied headshell 15.5 gEffective armlength (distance between the stylus and pivot point): 231.0 mmMounting distance (distance between the pivot point and turntable center): 213.0 mmOffset angle: 23.9 degreesOverhang: 18.0 mmTracking force adjusting range (direct reading): 0-3 gHeight adjustment range: 35-55 mmDiameter of the armbase mounting hole: 19-20 mmDiameter of the center shaft of tonearm: 18.0 mmInner null point: 66 mmOuter null point: 120.9 mmCounterweight for cartridge + headshell mass between 21 and 28 g includedHeadshell LH-2000E included Headshell LH-2000E weight: 15.5 gTA-110 total weight including headshell: 470 gSet of tonearm cables 6NX-TSW-1010 includedExtra mass ring for heavier cartridges included 

1.499 €
36 Δόσεις 51,75€ / μήνα
Κατόπιν Παραγγελίας

Βραχίονας Static 12&#39;&#39; Resonance optimaizedΠροδιαγραφές:  Effective mass without headshell: 5 gEffective armlength (distance between the stylus and pivot point): 329.0 mmMounting distance (distance between the pivot point and turntable center): 316.6 mmOffset angle: 16.5 degreesOverhang: 12.4 mmTracking force adjusting range (direct reading): 0-3/0-4 gHeight adjustment range: 35-55 mmDiameter of the armbase mounting hole: 19-20 mmDiameter of the center shaft of tonearm: 18.0 mmInner null point: 66 mmOuter null point: 120.9 mmCounterweight for cartridge + headshell mass between 21 and 28g includedHeadshell LH-2000E included Headshell weight: 15.5 gTA-210 total weight including headshell: 536 gSet of tonearm cables 6NX-TSW-1010 includedExtra mass ring for heavier cartridges included

1.549 €
36 Δόσεις 53,48€ / μήνα
Κατόπιν Παραγγελίας

Βραχίονας Static 12&#39;&#39;Προδιαγραφές:  Effective length (distance between the stylus and pivot point): 329mmMounting distance between the pivot point and turntable center: 314mmOffset angle: 19 degreesOverhang: 15mmTracking force adjusting range ( direct reading): 0 to 3gHeight adjustment range: 35mm to 55mmDiameter of the armbase mounting hole: 19mm to 20mmDiameter of center shaft: 18mm

1.899 €
36 Δόσεις 65,56€ / μήνα
Κατόπιν Παραγγελίας

Βραχίονας Dynamic 12&#39;&#39;Προδιαγραφές: Effective length (distance between the stylus and pivot point): 329mmMounting distance between the pivot point and turntable center: 314mmOffset angle: 19 degreesOverhang: 15mmTracking force adjusting range (direct reading): 0 - 5 g Height adjustment range: 42 mm - 57 mmDiameter of  the armbase mounting hole: 34 mm - 36 mmDiameter of the center shaft: 16 mmFixing holes PCD: dia. 50 mmSize/Thread: dia. 3.2 mm (dia. 3mm x 20mm and dia. 3 mm wood screw)Digital scale DS 1 includedHeadshell SH-1 included

2.699 €
36 Δόσεις 93,18€ / μήνα
Κατόπιν Παραγγελίας

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1000 Hz, 5cm/sec.400 μVChannel balance at 1 kHz< 1 dBChannel separation at 1 kHz> 24 dBChannel separation at 15 kHz> 20 dBFrequency range at - 3dB20 - 55 kHzFrequency response 20 Hz - 20 kHz+1,5Tracking ability at 315Hz at recommended tracking force *)80 µmCompliance, dynamic, lateral12 µm/mNStylus typeNude Ortofon replicant,, conical aluminiumStylus tip radiusr/R 5/100 µmTracking force range2,2-2,7 g (22-27 mN)Tracking force, recommended2,5 g (25 mN)Tracking angle23°Internal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel / AluminiumCartridge colourBronze/BlackCartridge weight10,7 gram 

2.149 €
36 Δόσεις 74,19€ / μήνα
Κατόπιν Παραγγελίας

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1000 Hz, 5cm/sec.0,3 mVChannel balance at 1 kHz< 0,8 dBChannel separation at 1 kHz> 27 dBChannel separation at 15 kHz> 20 dBFrequency range at - 3dB20 - 60.000 HzFrequency response 20 kHz - 20 kHz+1,5/0Tracking ability at 315Hz at recommended tracking force *)90 µmCompliance, dynamic, lateral16 µm/mNStylus typeNude Shibata, Boron cantileverStylus tip radiusr/R 6/50 µmTracking force range2,0-2,5 g (20-25 mN)Tracking force, recommended2,3 g (23 mN)Tracking angle20°Internal impedance, DC resistance5 OhmRecommended load impedance> 10 OhmCartridge body materialStainless steel AluminiumCartridge colourBlack/BlackCartridge weight10,7 gram 

2.182 ,85 €
36 Δόσεις 75,36€ / μήνα
Κατόπιν Παραγγελίας

Κινητού πηνίου(MC).Προδιαγραφές: Output voltage at 1 kHz 5 cm/sec450 μVChannel balance< 1,5 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-3Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude fine line, Al. cantileverStylus tip radiusr/R 8/40Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-500 OhmCartridge body materialStainless steel AluminiumCartridge colourRed/BlackCartridge weight10,7 g 

1.249 €
36 Δόσεις 43,12€ / μήνα
Κατόπιν Παραγγελίας

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1 kHz 5 cm/sec500 μVChannel balance< 1,2 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-2Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude FG 70, Ruby cantileverStylus tip radiusr/R 6/70Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel AluminiumCartridge colourBlue/BlackCartridge weight10,7 g 

1.749 €
36 Δόσεις 60,38€ / μήνα
Κατόπιν Παραγγελίας

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5,5 mVChannel balance at 1 kHz 1,5 dBChannel separation at 1 kHz25 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-25.000 HzFrequency response20-20.000 Hz + 2 / - 1 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral20 µm/mNStylus typeNude EllipticalStylus tip radiusr/R 8/18 µmTracking force range1,6-2,0g (16-20 mN)Tracking force, recommended1,8 g (18 mN)Tracking angle20°Internal impedance, DC resistance1,3 kOhmInternal inductance700 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BlueCartridge weight7,2 g 

209 €
36 Δόσεις 7,22€ / μήνα
Κατόπιν Παραγγελίας

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5 mVChannel balance at 1 kHz1 dBChannel separation at 1 kHz26 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-31.000 HzFrequency response20-20.000 + 2 / - 0 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral22 µm/mNStylus typeNude ShibataStylus tip radiusr/R 6/50 µmTracking force range1,4-1,7g (14-17 mN)Tracking force, recommended1,5 g (15 mN)Tracking angle20°Internal impedance, DC resistance1,2 kOhmInternal inductance630 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BlackCartridge weight7,2 g 

579 €
36 Δόσεις 19,99€ / μήνα
Κατόπιν Παραγγελίας

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5 mVChannel balance at 1 kHz1 dBChannel separation at 1 kHz26 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-29.000 HzFrequency response20-20.000 + 2 / - 0 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral22 µm/mNStylus typeNude Fine LineStylus tip radiusr/R 8/40 µmTracking force range1,4-1,7g (14-17 mN)Tracking force, recommended1,5 g (15 mN)Tracking angle20°Internal impedance, DC resistance1,2 kOhmInternal inductance630 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BronzeCartridge weight 7,2 g 

349 €
36 Δόσεις 12,05€ / μήνα
Κατόπιν Παραγγελίας

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.4 mVChannel balance at 1 kHz2 dBChannel separation at 1 kHz22 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-25.000 HzFrequency response20-20.000 Hz ± 2 dBTracking ability at 315Hz at recommended tracking force *)65 µmCompliance, dynamic, lateral20 µm/mNStylus typeEllipticalStylus tip radiusr/R 8/18 µmTracking force range1,5-2,0 g (15-20 mN)Tracking force, recommended1,75 g (17,5 mN)Tracking angle20°Internal impedance, DC resistance750 OhmInternal inductance450 mHRecommended load resistance47 kOhmRecommended load capacitance200-600 pFCartridge colour, body/stylusBlack/BlackCartridge weight5 g 

67 ,9 €
36 Δόσεις 2,34€ / μήνα
Κατόπιν Παραγγελίας