Manley TNT - 2 Channel Mic Preamplifer

Ο MANLEY TNT είναι ένας αξιόλογος και επιθυμητός λαμπάτος προενισχυτής στη μία πλευρά και το ισοδύναμό του σε solid-state στην άλλη πλευρά.

Αυτό δεν γίνεται με προσομοιώσεις, δείγματα, ούτε είναι ένας κλώνος ή ένα παιχνίδι. Είναι μια πραγματικά καλή παλιά αναλογική σχεδίαση υλοποιημένη σωστά.

Χαρακτηριστικά:

TUBE CHANNEL (Left Channel)

• Tube Channel Vacuum Tubes: 1 x 12AT7EH + 1 x NOS 6414 or 6414W
• Gain Range: +10 dB to +80 dB (20 to 70dB in 5 dB steps)
• Mic Input Impedance: 600, 2400, 10,000 Ohms
• Instrument Input Impedance: 300K,1Meg, 3 Meg Ohms
• Frequency Response: (-1 dB) 10 Hz to 30 kHz; (-3dB) 5 Hz to 45 kHz
• THD & NOISE (1 kHz @ 20 dB gain): 0.035% typical (-68 dB)
• Noise Floor: -60 dB typical referenced to +4dBm
• EIN: -120 dB
• Signal to Noise @ 70 dB Gain: 95dB (TRIM has major effect)
• Maximum Output for 1% THD via BALANCED +4 XLR: 31 dBu

  COOL CHANNEL (Right or Solid State Channel)

• Gain Range: +10 dB to +80 dB (20 to 70dB in 5 dB steps)
• Mic Input Impedance: 300, 600, 2000, 2 Meg Ohms
• Instrument Input Impedance: 100K, 300K,1Meg, 3 Meg, 10 Meg Ohms
• Frequency Response: (-1 dB) 15 Hz to 30 kHz; (-3dB) 5 Hz to 50 kHz
• THD & NOISE (1 kHz @ 20 dB gain): 0.01% typical (-80 dB) (no distortion products measurable, noise dominates measurement)
• Noise Floor: -66 dB typical referenced to +4dBm
• EIN: -126 dB
• Signal to Noise @ 70 dB Gain: 85dB (TRIM has little effect)
• Maximum Output for 1% THD:
  • via BALANCED +4 XLR: 30 dBu
  • via UNBALANCED +4 output: 24 dBu
  • via UNBALANCED -10 output: 16 dBu
• Distortion @ 1K using 60' / 70's switch:
  • 1.5% typical with LED onset (+4 dBu out)
  • 3% typical with LED fully lit (+7 dBu out)

  GENERAL

• Power consumption: 30 watts
• Operating mains voltage: Units' power transformers are wired for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be rewired on the pcb in order to change mains operating voltage. Fuse must be changed to appropriate value.
• Mains Voltage Frequency: 50~ 60Hz
• Fuse Values S/N up to MTNT142: @ 100 - 120V operation: 1A; @ 220 - 240V operation: 500mA
• Fuse Values S/N after MTNT142: @ 100 - 120V operation: 500mA; @ 220 - 240V operation: 250mA
• Fuse Size: 1/4" x 1 1/4" MDL or MDA SLO-BLO (time delay) type
• Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
• Unit Weight: 11 lbs. Shipping Weight: 16 lbs. in a 22.5" x 14.5" x 8" BOX