. go to top icon

Turntable Accesories

Filters
51  Products
Page
of 2

Technics SH-TB10, base for arms dedicated to the Technics SL-1000R turntable.Available versionsSH-TB10TC1-S Technics EPA-100mk2SH-TB10SM1-S SME M2-9RSH-TB10SM2-S SME M2-12RSH-TB10RT1-S Ortofon AS-212S and RS-212DSH-TB10RT2-S Ortofon AS-309S and RS-309DSH-TB10KD1-S IKEDA IT-345 CR-1SH-TB10KD2-S IKEDA IT-3407 CR-1

1.300 €
36 Instalments 44,88€ / month
Upon Order

The magnetic charge, which is generated on the recording- and playback heads during recording and playback is removed by this electronic, demagnetising wand in an electronic manner. Then the sound will be clear. Demagnetising takes only 3 to 5 seconds for each head. As a very strong magnetic field is generated by this accessory, do not use it if you have a pace-maker and do not use in the close vicinity of friends or family with a pace-maker.

25 €
36 Instalments 0,86€ / month
Upon Order

A accessory allowing you to achieve a very accurate mount level measurement. The Bubble level is framed in a stable housing with a glass plate with a measurement grid. The Three contact points on the bubble level and the housing size ensure stable positioning and clear indication of any sloping to help get the best sound quality from your turntable.Proper levelling is critical to getting the best sound from your turntable, making this accurate bubble level an essential vinyl accessory.This allows you to make sure your turntable is level. Simply place it on top of the turntable and check in several places, adjusting the turntable legs (if possible) or turntable platform or rack/shelf until your turntable is perfectly level. As proper levelling is critical to getting the best sound from your turntable, this is an essential vinyl accessory. A turntable on a slope is not good, it can effect the performance of your tonearm making it prone to jumping and skipping.This simple but effective level will tell you if your turntables are mounted on a flat surface for optimal.

10 €
36 Instalments 0,35€ / month
Upon Order

This state-of-the-art DJ turntable brush combines the properties of the Tonar Classic brush and the Nostatic brush in one! The central part of the brush is made of ultra-fine high-quality velvet. This plush is flanked on both sides by a thick layer of very fine carbon fiber. Carbon fibers remove static from the disc so that dust loosens and can be easily collected by the plush in the middle of the brush even from the deep grooves of the discs.

25 €
36 Instalments 0,86€ / month
Upon Order

High quality matte natural cork & rubber turntable to better insulate your vinyl records and minimize vibrations and transfer of static electricity.

29 €
36 Instalments 1,00€ / month
Upon Order

In some cases, the original rubber mat on the turntable is very dirty or even chemically decomposed. Tonar now offers a fresh, freshly made rubber turntable mat to replace the old one.

41 €
36 Instalments 1,42€ / month
Upon Order

High quality matte black leather turntable to better insulate your vinyl records and minimize vibrations and static electricity transfer.

35 €
36 Instalments 1,21€ / month
Upon Order

High quality matte plexiglass turntable to better insulate your vinyl records and minimize vibration and static electricity transfer.

29 €
36 Instalments 1,00€ / month
Upon Order

High quality 100% natural cork to better insulate your vinyl records and minimize vibration and static electricity transfer.

21 €
36 Instalments 0,73€ / month
Upon Order

Brass Vinyl Record Stabilizer. Felt-coated base to avoid scratching the surface of your discs.

69 €
36 Instalments 2,38€ / month
Upon Order

Brass vinyl record stabilizer.

69 €
36 Instalments 2,38€ / month
Upon Order

50 pieces of protective covers for 7" discs.

30 €
36 Instalments 1,04€ / month
Upon Order

Covers for LP records, 10 inch, set: 25 pcs.

25 €
36 Instalments 0,86€ / month
Upon Order

Covers for 10-inch discs, set: 50 pcs.

21 €
36 Instalments 0,73€ / month
Upon Order

Protective anti-static 12" vinyl LP covers (pack of 25) made of anti-static plastic paper reinforcement inside.

27 €
36 Instalments 0,93€ / month
Upon Order

Inner sleeves suitable only for single discs (7 inches" - 17.5 cm). 50 pieces per package. antistatic inner sleeves (inner sleeves).

17 €
36 Instalments 0,59€ / month
Upon Order

Tonar plastipap liners (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you dust-free anti-static protection for your precious discs, as well as added strength to prevent cases from folding and creasing when you slide the case out or through the disc cover. This model 5311 plastipap is only suitable for LP records (12 inch-30 cm). (Tonar plastipap covers are also available for 45 and 78 RPM records). (Tonar provides record covers for 33, 45 and 78 RPM records as well as outer sheets to protect your precious albums).

29 €
36 Instalments 1,00€ / month
Upon Order

The LH-6000 is a high quality headshell is recommended for the MC Windfeld Ti and the Cadenza Series. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.

109 €
36 Instalments 3,76€ / month
Upon Order

Running out of water filters for your HumminGuru Record Cleaner? Buy this water filter pack that includes 30 pieces of water filter for your HG01 HumminGuru Ultrasonic Cleaner. Inside the Package30 pieces of water filters

39 €
36 Instalments 1,35€ / month
In stock soon

Filters are changing up quickly. Buy this filter pack that includes 15pcs of each air filter and water filter for your HG01 HumminGuru Ultrasonic Cleaner.Inside the Package15 pieces of air filters15 pieces of water filters

39 €
36 Instalments 1,35€ / month
In Stock

The replacement kit includes 2 pairs of rotation wheels, 5 pcs of the air filter and 5 pcs of water filter.Inside the packageRotation Wheel x 2 setsAir filters x 5 pcsWater filters x 5 pcsEVA stickers x 2 pcs

39 €
36 Instalments 1,35€ / month
In stock soon

The aztec blue mat reduces noise and lets the music flow.How aztec blue worksHow does this work? The secret is the unique design of the mat. 3 distinct layers of cork work in concert to decouple the record from the platter and isolate it from vibration. The large bottom layer grips the platter, providing a perfect non-resonant base for the upper spoke-style layer that lifts and separates eight isolation platforms. A single cork center that supports the record label and the isolation platforms around the outer edge of the mat decouple and float the record above the platter. This lowers record vibration and reduces acoustic feedback. Stylus tracking is improved and record wear reduced.The perfect materialCork is the perfect material. It sucks up unwanted vibrations and releases the life and energy of the music. It’s naturally non-static and non-adhesive making the mat perfectly safe for use on all platters, and it won’t harm your records.Cork grips the record better than felt so there’s less record slippage and fewer timing errors. The mat is thin, lightweight, and generally doesn’t require a VTA adjustment. Listen for yourself, the improvement is easy to hear.—The aztec blue mat reduces noise and lets the music flow. Try the it and amp-up the sound of your vinyl!

99 €
36 Instalments 3,42€ / month
In Stock

Kick out the jams with our cork record mat!How mat worksInstruments pop to life. Crackle is reduced. Vocals are clearer and more dramatic. The background is quieter, soundstage wider and deeper. How does this thing work? The secret is in the 12 isolation discs surrounding the outside of the mat and the single larger disc for the center label. The discs lift and support the record while floating it above and decoupling it from the platter. This lowers record vibration and reduces acoustic feedback. Stylus tracking is improved and record wear reduced. The mat eliminates the grunge and leaves behind a rich, clear, dynamic sound.The perfect materialCork is the perfect material. It sucks up unwanted vibrations and releases the life and energy of the music. It’s naturally non-static and non-adhesive making the mat perfectly safe for use on all platters, and it won’t harm your records.—Cork grips the record better than felt so there’s less record slippage and fewer timing errors. The mat is thin, lightweight, and generally doesn’t require a VTA adjustment. Listen for yourself, the improvement is easy to hear.

49 €
36 Instalments 1,69€ / month
Upon Order

These super-slim, ultra-slick slipmats will make even the trickiest scratches butter-smooth.Butter Rugs are made of a distinctive synthetic material with no added plastic or wax coating. The reduced friction between vinyl and platter minimizes additional noise and gives you more responsive control. Step up to the executive-class of slipmats.

19 €
36 Instalments 0,66€ / month
Available in warehouse

The Elipson Aluminium adaptator allows the playback of 45 rpm records on a vinyl turntable. Once placed on the central rotation axis, it offers perfect centering of 45 rpm vinyl records.

14 ,9 €
12 Interest Free Instalments 1,24€ / month
Upon Order

Composed of a digital scale, a spirit level, an antistatic brush and a cell cleaner, the Elipson accessory pack includes all the tools needed to properly maintain and adjust a vinyl turntable.

59 €
12 Interest Free Instalments 4,92€ / month
In Stock

The lightweight aluminum AT-HS10BK is a universal ½"-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.  Universal ½"-mount headshell for 4-pin turntable cartridges Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record Gold-plated lead wires for lossless signal transmission Includes mounting screws Fits the AT-LP120-USB and AT-LP1240-USB Direct-Drive Turntables

32 €
36 Instalments 1,10€ / month
Upon Order

The LH-10000 is an exceptionally high quality headshell made using a high performance Aluminum alloy with Zinc as the primary alloying element. The Aluminum alloy used for LH-10000 is strong, with strength comparable to steel. It has good fatigue strength and machinability, but offers more resistance to corrosion than many other Aluminum alloys. LH-10000 features a precision machined slit on the top plate. A piece of Ortofon's special proprietary TPE (Thermo-Plastic Elastomer) compound with excellent damping properties is integrated into the slit. LH-10000 incorporates damping technology similar to the Ortofon TA-110 / TA-210 tonearms and the Xpression cartridge, promoting a further reduction in unwanted resonances. LH-10000 is fitted with the set of the most sophisticated lead wires identical to Ortofon LW-800S, composed of pure silver and silver coated wire. Silver coated wire transmits the very clear high tone signals, which brings the brilliant tonality. LH-10000 is perfect for a variety of High-end cartridges, including the MC Anna, MC Anna Diamond, MC A95, MC Windfeld Ti, Cadenza Series, e.g. Cadenza Bronze as well as the historical MC A90, MC Windfeld, MC Century, Kontrapunkt series and MC Jubilee. LH-10000 is azimuth adjustable, which is beneficial for optimal channel separation.

499 €
36 Instalments 17,23€ / month
Upon Order

The AT-HS6 is a universal ½"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell comes with color-coded lead wires and mounting screws.  

38 €
36 Instalments 1,31€ / month
Upon Order

This universal 1/2"-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.

18 €
36 Instalments 0,62€ / month
Upon Order

The TD 180 has a very specific belt and this belt is 450mm long. Made with great attention to detail and quality. Cut using extremely high precision tools to ensure a perfectly straight cut without warping or bending and perfect edges. This is a Thorens TD-180 turntable belt replacement.

29 €
36 Instalments 1,00€ / month
Upon Order

Ιμάντας για πικάπ Thorens TD124

30 €
36 Instalments 1,04€ / month
Upon Order

This is a Brand new belt. Meet or exceed original OEM specifications the long-term elastic characteristics of modern belts ensure stability for years to come.

30 €
36 Instalments 1,04€ / month
Upon Order

Belt for Alpha and Omega turntables - Dimensions : Ø47 x L3 mm. Data sheet : Weight : 5 g Dimensions packaging (W x H x D) : 100 x 150 x 5 mm Weight with packaging, unit : 8 g

20 €
24 Interest Free Instalments 0,83€ / month
Upon Order

CounterWeight for Essential, Debut,RPM turntables

15 €
36 Instalments 0,52€ / month
Upon Order

Ιμάντες για τα πλατό Pro-ject (FLATBELT)Επίπεδος ιμάντας 1 mm σε πάχος και πλάτος 4 mmΣυνολικό μήκος = 490 mm  Ιμάντες για τα πλατό Pro-ject (FLATBELT) Επίπεδος ιμάντας 1 mm σε πάχος και πλάτος 4 mm  Συνολικό μήκος =  490 mm

12 €
36 Instalments 0,41€ / month
Upon Order

The Arran NorStone ground cable has been optimized to minimize distortion and limit electromagnetic interference. Technical Specifications: Structure: Copper OFC 99.999% Finish: Black PVC sheath Quantity/box: 1 Type: Plastic bag Dimensions (W x H x D) >/=2m : 170 x 170 x 50mm

35 €
36 Instalments 1,21€ / month
Upon Order

Turntable mats have been always a big discussion how they influence the sound. The interaction between the record and the surface can be tracked very easily by the supersensitivity of a good pick up cartridge.  Common felt mats give a smooth contact between record and platter but has the disadvantage with static. That means that feltmats often collect a lot of dust which can be then transfered to the record. Also the damping ability is very limited which can be a problem with metal platters. Thick rubbermats overdamp the record and have an isolation effect which leaves the static on the record and hearable noise clicks are the result.  Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances Are damped more effectively than felt, they keep dust away and they have also enough contactivity to avoid static.  What is better depends on taste and the actual platter design.A very costeffectiv way to improve the sound and have less noise by static and dust. You can hear a difference!  

9 ,9 €
24 Interest Free Instalments 0,41€ / month
Upon Order

The next generation of turntable wall bracket is manufactured from lightweight 3mm laser cut folded aluminum.This completely new design is 1.2kg lighter and more rigid than the previous model and is specifically designed to compliment the latest range of lightweight Rega turntables. Simple screw fit adaptors are available to fit the RP6, RP8 and RP10 turntables.

219 €
Interest Free Instalments 73,00€ / month
Upon Order

Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.

26 €
Interest Free Instalments 8,67€ / month
Upon Order

Want to take the performance of your multi award winning Planar 1, Planar 2 or RP1  turntable to the next level? The Performance Pack can be purchased as an aftermarket kit designed specifically for the above mentioned Rega turntables. Included in the pack:Upgrade drive beltThe increased drive delivered by the upgrade belt offers greater speed, stability and accuracy. This is especially noticeable during long musical notes which adds greatly to the musical performance of the turntable.Bias 2 cartridgeA hand assembled moving magnet cartridge which uses a high quality elliptical stylus and parallel wound coils that would usually be found in cartridges, costing many times the amount. Housed in Rega’s unique, lightweight, high rigidity cartridge body, the Bias 2 offers a detailed, balanced performance with tight bass and excellent stereo imagery.Turntable MatA high quality mat manufactured from 100% natural wool. Wool, having stiffer fibres than synthetic man made material, directly improves coupling between the phenolic resin platter and the vinyl LP.

180 €
Interest Free Instalments 60,00€ / month
Upon Order

This kit includes the low noise, low vibration 24v motor designed and developed for our range of multi award winning 24v turntables.Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24v technology. Features:Individually hand tuned PCB to minimise vibration. Rega designed 24v low vibration, low noise synchronous AC motor assembly.Rigidly mounted to improve start up speed over previous suspended Planar models. Guaranteed to improve drive, speed stability and sonic performance. Specifications:Individually hand tuned PCB to minimise vibrationRega designed 24v low vibration, low noise synchronous AC motor assemblyRigidly mounted to improve start up speed over previous suspended Planar modelsGuaranteed to improve drive, speed stability and sonic performance.

249 €
Interest Free Instalments 83,00€ / month
Upon Order

Designed to fit the latest Rega turntable wall bracket (2012 model onwards).These precision aluminium cups are pushed onto the existing cups providing the large footprint required for the RP8 and RP10 Turntables.  Features:Push fit'O' ring dampedOptional anti-slip pad included* All other Rega turntables will fit the bracket with or without the adaptors.Please note: These adaptors only fit the older style Rega wallbracket - new adaptors are available for the current 2016 wall bracket.Aluminium push fit adaptors for the Rega turntable wall bracket allowing both the RP8 and RP10 to be used with the bracket.

110 €
Interest Free Instalments 36,67€ / month
Upon Order

Custom made high quality Rega turntable drive belt.We recommend changing the drive belt approximately every five years to ensure accurate speed performance.Each belt is made from a unique and complex polychloroprene formula a material that exhibits good chemical stability, and maintains flexibility over a wide temperature range.

30 €
Interest Free Instalments 10,00€ / month
In Stock

Non-static platter mat consisting of fine granules (cork). Made to effectively suppress the typical resonance generated in vinyl records during playback as well as to provide a silent foundation.

35 €
36 Instalments 1,21€ / month
Upon Order