. go to top icon

Τελικοί Ενισχυτές

Φίλτρα
103  Προϊόντα
Σελ
από 3

NAD CI 980 Multi Channel AmplifierNo worries, No hassle. System reliability and simple installation and unrivalled bang for buck were the primary objectives in the CI 980 design. NAD is in the top tier of all amplifier brands, consistently winning awards for both performance and value for money. The CI 980 offers warm, expansive and intensely musical sound, designed to drive real world speaker loads. You will love the way the CI 980 brings out the best performance from any speaker for a remarkable listening experience. It is also extremely quiet with inaudible residual noise in no signal conditions, important when using efficient speakers in small spaces.Full Disclosure PowerThe CI 980 offers NAD’s offers the same sonic performance, as that found in some of the best- selling hi fi amplifiers of all time from our Classic Series range. As per NAD’s Full Disclosure Power (FDP) ratings, it’s capable of delivering a conservative 50 watts per channel at 8 ohms into all channels simultaneously, so no need to worry about a lack of power, or the amplifier becoming strained, when all zones are active in a multi-room system. The CI 980 is also bridgeable to 120 watts per channel into 8 ohms, and stability into 4 ohm speaker loads.NAD AmplificationThe CI 980 has 8 channels of clean, low distortion power set up in a 4 stereo zone configuration. Boasting 50 watts per channel, the CI 980 is designed to drive low impedance speakers and long wire runs. By utilizing the latest high efficiency switching amplifier technology, the CI 980 is an all-new design built to be small, light, and very energy efficient, with superb musical sound quality for which NAD is known.Rack Space Efficiency and ReliabilityThe CI 980 voltage is universal, which can be important in marine and avionics installations. The amplifier is fully protected from short-circuiting and overheating, plus operation is automatically restored after the condition is rectified. Indicator lamps for each zone show protection status and amplifier clipping. With

1.499 €
36 Δόσεις 51,75€ / μήνα
Κατόπιν Παραγγελίας
New

The CI-NAP 108 is an 8-channel power amplifier designed to be the perfect complement to an integrated audio installation, in particular Focal in-wall hi-fi speakers. When combined with the CI-Uniti 102, it can be used to address several speakers in different rooms or amplify eight separate audio streams thanks to its local inputs for each amplified channel. It is the ultimate amplification solution for a system synonymous with uncompromising power and sound quality.Some Key Points about NAP 10810 RCA inputs, including 8 local inputs and 2 L/R bus inputs.10 RCA outputs for series connection with other amplifiers, such as the CI-101.A silent, efficient and compact integrated power amplifier.Two Euroblock outputs per channel for easy parallel connections between loudspeakers.Independent level control.Input signal detection with automatic power-down after 20 minutes.Universal 100V to 240V mains power supply.

2.999 €
24 Άτοκες Δόσεις 124,96€ / μήνα
Κατόπιν Παραγγελίας
New

The CI-NAP 101 is an ultra-quiet mono power amplifier compatible with 70V/100V line array loudspeakers. Compact and rack-mountable for easy, discreet installation, it is ideal for powering subwoofers or integrated hi-fi speakers that require a lot of power, while offering exceptional audio quality. What's more, it can be combined with an audio-video processor for tailor-made and ultimate installations.The CI-NAP 101 In A Few Key PointsStereo RCA inputs and stereo RCA outputs for series connection. Two Euroblock outputs for easy parallel connections between speakers.High impedance 70V/100V line amplification with selectable high-pass filter. Level control.Input signal detection with automatic power-down after 20 minutes.Universal 100V to 240V mains power supply

1.699 €
24 Άτοκες Δόσεις 70,79€ / μήνα
Κατόπιν Παραγγελίας
New

The 8300XP is a classic audiolab stereo power amplifier, sounding as clear and vibrant as its minimalist exterior.Delivering 140W per channel into 8 Ohms, the 8300XP is capable of driving even the most challenging speakers, combining audiolab's premium neutrality with an unyielding ability to draw the listener into the music it plays.Minimalist exteriorAudiolab's exemplary build quality and reliability ensure the 8300XP is a timeless power amplifier, its connection flexibility enhanced by the presence of Balanced XLR and single-ended RCA inputs, dual-wiring speaker terminals and a pair of 12v trigger inputs. The materials used in its circuitry are of the highest quality, right down to the speaker and power plugs, which are made from ultra-pure OCC (Ohno Continuous Cast) copper - all helping to minimize distortion and maximize sonic clarity.Flexibility is further enhanced by the ability to add a second 8300XP and operate in bridged mode, increasing output power to 480W per channel into 8 Ohms.All audiolab amplifiers are designed to ensure perfect cooperation with other audiolab devices.Exciting to listen to and reliable to build, the 8300XP is a true audiophile sounder and a perfect partner for Audiolab's 8300CDQ, or M-DAC.

1.869 €
36 Δόσεις 64,52€ / μήνα
Κατόπιν Παραγγελίας

The 8300XP is a classic audiolab stereo power amplifier, sounding as clear and vibrant as its minimalist exterior.Delivering 140W per channel into 8 Ohms, the 8300XP is capable of driving even the most challenging speakers, combining audiolab's premium neutrality with an unyielding ability to draw the listener into the music it plays.Minimalist exteriorAudiolab's exemplary build quality and reliability ensure the 8300XP is a timeless power amplifier, its connection flexibility enhanced by the presence of Balanced XLR and single-ended RCA inputs, dual-wiring speaker terminals and a pair of 12v trigger inputs. The materials used in its circuitry are of the highest quality, right down to the speaker and power plugs, which are made from ultra-pure OCC (Ohno Continuous Cast) copper - all helping to minimize distortion and maximize sonic clarity.Flexibility is further enhanced by the ability to add a second 8300XP and operate in bridged mode, increasing output power to 480W per channel into 8 Ohms.All audiolab amplifiers are designed to ensure perfect cooperation with other audiolab devices.Exciting to listen to and reliable to build, the 8300XP is a true audiophile sounder and a perfect partner for Audiolab's 8300CDQ, or M-DAC.

1.869 €
36 Δόσεις 64,52€ / μήνα
Κατόπιν Παραγγελίας

The 8300MB mono power amplifier is a powerhouse, boasting 250W of clean, balanced amplification. Full 8300MB power delivered to any speaker load - unconditionally. Huge power reserves are available for high driveability to power and control the most powerful speakers. This latest evolution of the audiolab range now features a fully balanced power stage making the most of the balanced XLR inputs. This makes the 8300MB a perfect match for the 8300CDQ using its balanced outputs, even with long cable lengths.Pure powerThe 8300MB final amplifier is probably the perfect example of audiolab's aim to effortlessly reproduce music in exquisite detail. The 8300MB is an extremely powerful amplifier, delivering 250W of pure power with high driveability, but also featuring a fully balanced power stage.Internally the 8300MB is arranged as two full power amplifiers bridged to the loudspeaker terminals. Each power amplifier stage is fed from one of the balanced input terminals, so the 8300MB acts as a fully balanced amplifier all the way to the speaker output.The benefits are a high level of noise rejection and lower transient distortion as well as the amplifier's ability to draw maximum current from the power supply as required to accurately follow the musical waveform.It all adds up to a stunningly vivid and highly commanding musical performance that will energize and control your speakers like never before.

1.199 €
36 Δόσεις 41,39€ / μήνα
Κατόπιν Παραγγελίας

The 8300MB mono power amplifier is a powerhouse, boasting 250W of clean, balanced amplification. Full 8300MB power delivered to any speaker load - unconditionally. Huge power reserves are available for high driveability to power and control the most powerful speakers. This latest evolution of the audiolab range now features a fully balanced power stage making the most of the balanced XLR inputs. This makes the 8300MB a perfect match for the 8300CDQ using its balanced outputs, even with long cable lengths.Pure powerThe 8300MB final amplifier is probably the perfect example of audiolab's aim to effortlessly reproduce music in exquisite detail. The 8300MB is an extremely powerful amplifier, delivering 250W of pure power with high driveability, but also featuring a fully balanced power stage.Internally the 8300MB is arranged as two full power amplifiers bridged to the loudspeaker terminals. Each power amplifier stage is fed from one of the balanced input terminals, so the 8300MB acts as a fully balanced amplifier all the way to the speaker output.The benefits are a high level of noise rejection and lower transient distortion as well as the amplifier's ability to draw maximum current from the power supply as required to accurately follow the musical waveform.It all adds up to a stunningly vivid and highly commanding musical performance that will energize and control your speakers like never before.

1.199 €
36 Δόσεις 41,39€ / μήνα
Κατόπιν Παραγγελίας

The MI347 7-Channel Digital Amplifier is a dedicated home theater amplifier that delivers an immersive sonic experience that provides a heart-stopping, edge-of-your-seat audio experience in the comfort of your home theater. It uses highly sophisticated closed loop digital switching amplifiers that are paired with extremely robust power supplies that produce audio performance levels rarely heard in home theaters.Meant to be heard more than seen – such as being installed in an out-of-sight A/V equipment rack, the MI347 has a simplified and understated exterior. But rest assured that the internal circuitry and components have received the full attention of the McIntosh engineers to make you feel like you are part of your favorite movies. With its rack-friendly 3U height, it can easily be installed in your A/V rack via the included rack mounting brackets (the mounting brackets are removable for non-rack installations). But the MI347 is not limited to just rack installations, as it can also be placed out in the open for all to see and enjoy.

7.850 €
12 Άτοκες Δόσεις 654,17€ / μήνα
Κατόπιν Παραγγελίας

Ένας ενισχυτής ορόσημο, ο NAP 350 προσφέρει ακριβής μουσική επίδοση, μεγάλη ισχύ και μπορεί να συνδεθεί με μεγάλο εύρος hi-fi ηχείων. Μπορεί να χρησιμοποιηθεί σε συνδυασμό με άλλα NAP 350. Χάρη στο αθόρυβο σύστημα ψύξης, είναι πολύ εύκολο να εγκατασταθεί στο περιβάλλον της επιλογής σας χωρίς ηχητικές διακοπές. Ο NAP 350 και ο 175 Watt monoblock σχεδιασμός αποδίδει απίστευτες δυναμικές, καλύπτοντας τις ανάγκες μέχρι των πιο απαιτητικών μεγάφωνων. Προσφέρει απόλυτη συμβατότητα χάρη ειδικά στην balanced XLR είσοδο η οποία διευκολύνει συνδέσεις και μπορεί συνδυαστεί με έναν η περισσότερους ενισχυτές.

7.000 €
12 Άτοκες Δόσεις 583,33€ / μήνα
Κατόπιν Παραγγελίας
New

Ο Naim NAP 250 εμφανίστηκε για πρώτη φορά το 1975 και η αισθητική και τεχνική του εξέλιξη, έχει εξασφαλίσει τη διαρκή κορυφαία απόδοση του όλα αυτά τα χρόνια, δημιουργώντας αξέχαστες μουσικές εμπειρίες. Το νέο μοντέλο έκτης γενιάς προσφέρει περισσότερη ισχύ από ποτέ. Η υπερσύγχρονη τεχνολογία του παρέχει ασυναγώνιστη απόδοση. Σχεδιασμένο στο Salisbury στην Αγγλία, μπορεί να συνδυαστεί με τα μεγάφωνα της επιλογής σας για να προσφέρει εξαιρετικές ακρόασεις.Για να αξιοποιήσετε στο έπακρο τα μεγάφωνα και τη μουσική σας, συνδυάστε το με τον προενισχυτή Streamer Naim NSC 222 τον τέλειο συνεργάτη του. Ο NAP 250 σήμερα, παρέχει περισσότερη ισχύ από ποτέ και προσφέρει ακόμη μεγαλύτερη ευελιξία. Οι τεχνολογίες αιχμής που περιλαμβάνονται στον NAP 250, σε συνδιασμό με τον κλασσικό ήχο της Naim έχουν ως αποτέλεσμα ασυναγώνιστες επιδόσεις. Παρέχει ισχύ 100 watts κλάσης A/B ανά κανάλι με εξαιρετική οδήγηση κάθε ηχείου και φορτίου για να ελευθερώσετε τη μουσική σας με τον πιο αξιοσημείωτο τρόπο

6.990 €
12 Άτοκες Δόσεις 582,50€ / μήνα
Άμεσα Διαθέσιμο
New

It is well known that using monoblock amplifiers, as opposed to both channels together as a stereo chassis, is the best way to get powerful and lifelike music. By using separate power supplies that can be much more massive, each amplifier can have more dynamic power and be quieter. Keeping two separate amplifiers also makes any inter-channel crosstalk in the amplifiers impossible, so separation is better, meaning your soundstage and musical imaging will be larger and more well-defined. The simple act of separating the two channels provides a lot of distinct advantages, but also increases the investment because of needing to double up on power supplies and chassis parts.Is this extra expense worth it? One listen to the CAD-211FE will convince you that it most certainly is. With over 70 watts of class-A power, automatically transitioning as needed to over 150 watts in class-AB, this powerhouse will effortlessly drive nearly any speaker to realistic live performance levels. It includes a bias meter on the front panel to help you maintain your amplifier at its peak operating level, and offers both XLR balanced and RCA single-ended inputs to match your system. Fully differentially-balanced construction, zero global feedback, and huge reserves of current and power mean that your system will come alive with all types of music and movies.

26.000 €
36 Δόσεις 897,61€ / μήνα
Κατόπιν Παραγγελίας

The CAD-805 Reference Series (CAD-805RS) is the latest edition in the 805 series of single-ended mono block amplifiers that has been in continuous production since 1993.Here is what you will see with a pair of CAD-805RS moving from front to back. The front panel is a handsome thick machined aluminum that is available in either silver or black anodized finish. The CAD-805RS is equipped with a built-in meter on the front of the chassis. The adjustment pot is located at the rear of the chassis along with a bias jack for an external meter. Looking at the amplifier from above, you see a top-plate, which is finished in a handsome Anthracite Black gloss enamel, with white silkscreened lettering. To the left, the main power switch, to the right the ‘standby/operate’ switch which powers up the 211 or 845 output tubes. To the left is a rotary switch with a green jewel-like knob that chooses the appropriate bias for your choice of 211 or 845 output tubes. To the right is a similar rotary knob that dials in ‘negative feedback’ on a global basis and is adjustable from “off” in a continual rotation to a max of 10 dB of feedback. Also, on this top front portion of the amplifier are two 6SN7 input stage tubes, a 300B driver stage tube, and your choice of either an 845 or 211 output tube.Behind the tubes, the main real-estate of the 805 is occupied by two very impressively sized transformers—one power, and one output, and four electrolytic capacitors. Also, toward the rear of the chassis are the aforementioned setscrew adjustment pot for biasing purposes and the quarter inch bias jack for reading the bias of the 300B driver tube. These are the only user adjustments you will have to worry about, other than choosing your output tube flavor.The back panel offers a choice of 4, 8, or 16 ohm speaker outputs that are very high quality and heavy duty. There is a RCA input jack and a XLR input jack with a user selectable switch, and two visible fuses—one for the 300B and one for the output tube. There is also a built-in fuse within the AC power socket. The power cord is detachable.To review the circuit, the single-ended audio input signal from the outside world is passed to the control input grid of the first 6SN7 tube. This first 6SN7 stage is operating in a parallel dual triode conventional resistance-coupled Class A amplifier. This first gain stage is directly coupled to the next 6SN7 dual triode gain stage. This second stage is operating in a series anode constant-current Class A amplifier. This amplified audio signal is passed through a coupling capacitor to the grid of the 300B driver stage.The 300B triode tube operates in a Class A single-ended mode utilizing fixed negative grid voltage on the 300B driver stage. This negative grid voltage is user-adjusted by the screwdriver pot at the rear of the CAD-805RS. The 300B is directly coupled to the grid of either a 211 or 845, 100-watt plate dissipation, triode output tube. The method of coupling at this stage is called an interstage transformer. This is an air-gap design with a flat frequency response from 30Hz to 23 KHz.The audio signal from the 300B interstage transformer will drive the 211/845 output tube to 27 watts Class A output. With additional volume levels, the amplifier goes into a positive grid mode with a power output of 50 watts Class A2. In the case of the 211-output tube, the Class A2 power is on the order of 70 watts at clipping. The high-power output from the 211/845 tube is coupled to the loudspeaker via an air-gapped 150 watt continuous duty output transformer. This transforms the high impedance (8000 ohm primary winding) of the output tube to 4,8, or 16 ohms to drive the loudspeaker.

19.800 €
36 Δόσεις 683,56€ / μήνα
Κατόπιν Παραγγελίας

Cary Audio has almost always offered stereo tube power amplifiers, and the CAD-120S MkII is the latest in this long line of award-winning, top-rated amplifiers. The new MkII version of our most popular power amplifier features a boosted sensitivity and reduced level of global feedback, allowing it to be used with a wider variety of other preamplifiers to produce a larger soundstage with more apparent musical detail.Fully differentially-balanced, like most Cary Audio products, the CAD-120S MkII offers both RCA single-ended and XLR balanced inputs to match any associated equipment. Front panel meters continually monitor the bias current to the tubes, helping you easily keep the amplifier operating at its peak efficiency.A huge power supply provides plenty of current storage to handle peak demands of your music. It can be switched on the fly from triode mode (Class A) at 60 watts per channel, to ultralinear mode (Class AB) at 120 watts per channel. This lets you enjoy the greatest possible minute details of your more delicate music, or ask for much more power when you want to turn it up a few notches. The CAD-120S MkII can make almost any system sound its very best in your home.

8.400 €
36 Δόσεις 290,00€ / μήνα
Κατόπιν Παραγγελίας

The introduction of the SA-500.1 ES solid-state power amplifier represents the next generation of the SA-500.1 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.The SA-500.1 ES is a 500 watt monoblock amplifier into 8 ohms, (1000 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.When we designed the SA-500.1 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

6.800 €
36 Δόσεις 234,76€ / μήνα
Κατόπιν Παραγγελίας

The introduction of the SA-200.2 ES solid-state power amplifier represents the next generation of the SA-200.2 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.The SA-200.2 ES is a 200 watt stereo amplifier into 8 ohms, (350 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.When we designed the SA-200.2 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal, we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

7.300 €
36 Δόσεις 252,02€ / μήνα
Κατόπιν Παραγγελίας

Περιγραφή Ο Edge M της εταιρείας Cambridge Audio ανήκει στην οικογένεια των solid μονοφωνικών τελικών ενισχυτών. Ο τελικός ενισχυτής είναι μια συσκευή η οποία δέχεται το σήμα της εκάστοτε πηγής (cd/dvd player, πικάπ, ραδιόφωνο, κλπ.), αφού πρώτα περάσει απαραίτητα από έναν προενισχυτή. Στη συνέχεια ενισχύει κατάλληλα και το μεταφέρει στα ηχεία για αναπαραγωγή. Για τον λόγο αυτό συνήθως οι τελικοί ενισχυτές έχουν μόνο το κουμπί on/off και το ρυθμιστή της έντασης (volume). Στην προκειμένη περίπτωση λειτουργεί με τρανζίστορ ή αλλιώς solid state. Επειδή είναι μονοφωνικός χρειάζεται να συνδυάσετε δύο για να έχετε στερεοφωνικό ήχο. Η ισχύς του είναι 350W/4Ω ή 200W/8Ω.

4.749 €
36 Δόσεις 163,95€ / μήνα
Κατόπιν Παραγγελίας

DescriptionTangent PowerAmpster II is extremely flexible and can be used in many different situations. Connect it to a pre-amp, such as the Tangent PreAmp II, and experience the power to drive virtually any speaker in either stereo or mono bridge mode. Alternatively, the PowerAmpster II is ideal as a multi-room power amplifier. Connect a multi-channel preamplifier and the PowerAmpster II will be able to drive the speakers of choice in any room. Another possible use is as a front L/R upgrade for home theater systems. Powerful SoundWith 100 watts per channel, the PowerAmpster II has enough power to drive a wide range of speakers. Its high output also makes it ideal in larger rooms. The high-quality built-in power supply gives the music a real punch, whether it's classical, rock or pop.Double UpWhen more "power" is needed, add a second PowerAmpster, switch them both to mono mode and enjoy 200 watts per channel. 

269 €
12 Άτοκες Δόσεις 22,42€ / μήνα
Κατόπιν Παραγγελίας

DescriptionA new state-of-the-art flagship power amplifier featuring John Franks’ latest circuit topology, some 30 years in the making.The ULTIMA mono power amplifiers have been conceived for the very finest high-end audio systems, those which by their very nature, tend to have the most demanding and most difficult-to-drive large loudspeakers. They deliver unsurpassed power delivery and are capable of effortlessly driving any speaker.ULTIMA is the company’s most accomplished amplifier in its 30-year history and one that draws on Chord Electronics’ three decades of proprietary-technology amplifier manufacturing. It features an all-new circuit topology, the first completely new design since those early days. The new dual-feed forward error-correction amplifier technology is a progression of Dr Malcolm J Hawksford’s (emeritus professor at Essex University) technical paper, refined by Bob Cordell of Bell Labs.ULTIMA contains Chord Electronics’ next-generation amplifier tech, a design which features Cordell’s advanced dual-feedforward error-correction topology, plus John Franks’ own advanced concepts in ultra-high-frequency power supplies.The ULTIMA mono amplifier unit has an incredible 64 proprietary MOSFET power devices that demand the most advanced and refined drive circuitry, suitably devoid of sound-degrading components. The drive circuitry features an ultra-low-distortion, high-voltage amplifier operating at very high speed: 300 volts-per-microsecond technologies with advanced feed-forward and feedback compensation techniques.ULTIMA is incredibly powerful and offers 780 watts into 8 ohms, 1,400 watts into 4 ohms and 2,500 watts into 2 ohms. ULTIMA’s peak output current exceeds 500 amps, an extremely high current differentiated by the speed at which the dynamic peaks can be delivered, bringing astonishing dynamics, fidelity and unrivalled musicality.ULTIMA is truly an unprecedented amplifier design with exceptional performance and is one of the most advanced hi-fi amplifiers in the world.

47.800 €
36 Δόσεις 1.650,22€ / μήνα
Κατόπιν Παραγγελίας

DescriptionA new state-of-the-art flagship power amplifier featuring John Franks’ latest circuit topology, some 30 years in the making.The ULTIMA mono power amplifiers have been conceived for the very finest high-end audio systems, those which by their very nature, tend to have the most demanding and most difficult-to-drive large loudspeakers. They deliver unsurpassed power delivery and are capable of effortlessly driving any speaker.ULTIMA is the company’s most accomplished amplifier in its 30-year history and one that draws on Chord Electronics’ three decades of proprietary-technology amplifier manufacturing. It features an all-new circuit topology, the first completely new design since those early days. The new dual-feed forward error-correction amplifier technology is a progression of Dr Malcolm J Hawksford’s (emeritus professor at Essex University) technical paper, refined by Bob Cordell of Bell Labs.ULTIMA contains Chord Electronics’ next-generation amplifier tech, a design which features Cordell’s advanced dual-feedforward error-correction topology, plus John Franks’ own advanced concepts in ultra-high-frequency power supplies.The ULTIMA mono amplifier unit has an incredible 64 proprietary MOSFET power devices that demand the most advanced and refined drive circuitry, suitably devoid of sound-degrading components. The drive circuitry features an ultra-low-distortion, high-voltage amplifier operating at very high speed: 300 volts-per-microsecond technologies with advanced feed-forward and feedback compensation techniques.ULTIMA is incredibly powerful and offers 780 watts into 8 ohms, 1,400 watts into 4 ohms and 2,500 watts into 2 ohms. ULTIMA’s peak output current exceeds 500 amps, an extremely high current differentiated by the speed at which the dynamic peaks can be delivered, bringing astonishing dynamics, fidelity and unrivalled musicality.ULTIMA is truly an unprecedented amplifier design with exceptional performance and is one of the most advanced hi-fi amplifiers in the world.

47.800 €
36 Δόσεις 1.650,22€ / μήνα
Κατόπιν Παραγγελίας

DescriptionUpdated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.As part of our extended 30th-anniversary celebrations in 2019, we have implemented our flagship ULTIMA amplifier topology into a new mono power amplifier, Ultima 2.First unveiled in October 2018, the new ULTIMA amplifier topology (which to date has been exclusive to the range-topping ULTIMA power amp), is now more affordable than ever having trickled down into the new ULTIMA 2 mono power amp, which shares the same Chord Electronics DNA as in its range-topping cousin.The new 750-watt ULTIMA 2 is a direct replacement for the SPM 6000 MKII and forms part of our flagship Reference range. The amp has been given a remodelled fascia featuring John Franks’ latest design. The precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet and hidden front panel switch neatly located in the vertical split line, enables the lighting to be dimmed.Like all of Chord Electronics’ full-size and Reference range amplifiers, the new ULTIMA 2 is available in a choice of Jett Black or Argent Silver finishes. The amplifiers can also be specified with either the famous stackable Integra Leg system in Jett Black, Argent Silver or Nickel finishes or the highly polished black acrylic side block option. The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12V trigger and a C-19-type IEC.

28.900 €
36 Δόσεις 997,73€ / μήνα
Κατόπιν Παραγγελίας

DescriptionUpdated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.As part of our extended 30th-anniversary celebrations in 2019, we have implemented our flagship ULTIMA amplifier topology into a new mono power amplifier, Ultima 2.First unveiled in October 2018, the new ULTIMA amplifier topology (which to date has been exclusive to the range-topping ULTIMA power amp), is now more affordable than ever having trickled down into the new ULTIMA 2 mono power amp, which shares the same Chord Electronics DNA as in its range-topping cousin.The new 750-watt ULTIMA 2 is a direct replacement for the SPM 6000 MKII and forms part of our flagship Reference range. The amp has been given a remodelled fascia featuring John Franks’ latest design. The precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet and hidden front panel switch neatly located in the vertical split line, enables the lighting to be dimmed.Like all of Chord Electronics’ full-size and Reference range amplifiers, the new ULTIMA 2 is available in a choice of Jett Black or Argent Silver finishes. The amplifiers can also be specified with either the famous stackable Integra Leg system in Jett Black, Argent Silver or Nickel finishes or the highly polished black acrylic side block option. The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12V trigger and a C-19-type IEC.

28.900 €
36 Δόσεις 997,73€ / μήνα
Κατόπιν Παραγγελίας

DescriptionFeaturing our all-new circuit topology, ULTIMA 3 is a thoroughly modern amplifier for the high-resolution age.Our flagship ULTIMA amplifier topology has been integrated into a new mono power amplifier as part of our ongoing 30th-anniversary celebrations, introducing ULTIMA 3.The new ULTIMA amplifier topology (which to date has been exclusive to the range-topping ULTIMA power amp), is now more affordable than ever before having trickled down into the new ULTIMA 3 mono power amp, which is every bit a Chord Electronics thoroughbred and shares the same winning formula as its range-topping cousin.The new 480-watt ULTIMA 3 replaces the SPM 1400 MKII and sits in the Full Size range. The amp has been given a remodelled fascia featuring John Franks’ latest design. The precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet and hidden front panel switch neatly located in the vertical split line, enables the lighting to be dimmed.Like all of Chord Electronics’ full-size and Reference range amplifiers, the new ULTIMA 3 is available in a choice of Jett Black or Argent Silver finishes. The amplifier can also be specified with either the famous stackable Integra Leg system in Jett Black, Argent Silver or Nickel finishes or the highly polished black acrylic side block option. The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12V trigger and a C-19-type IEC.

16.550 €
36 Δόσεις 571,36€ / μήνα
Κατόπιν Παραγγελίας

DescriptionFeaturing our all-new circuit topology, ULTIMA 3 is a thoroughly modern amplifier for the high-resolution age.Our flagship ULTIMA amplifier topology has been integrated into a new mono power amplifier as part of our ongoing 30th-anniversary celebrations, introducing ULTIMA 3.The new ULTIMA amplifier topology (which to date has been exclusive to the range-topping ULTIMA power amp), is now more affordable than ever before having trickled down into the new ULTIMA 3 mono power amp, which is every bit a Chord Electronics thoroughbred and shares the same winning formula as its range-topping cousin.The new 480-watt ULTIMA 3 replaces the SPM 1400 MKII and sits in the Full Size range. The amp has been given a remodelled fascia featuring John Franks’ latest design. The precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet and hidden front panel switch neatly located in the vertical split line, enables the lighting to be dimmed.Like all of Chord Electronics’ full-size and Reference range amplifiers, the new ULTIMA 3 is available in a choice of Jett Black or Argent Silver finishes. The amplifier can also be specified with either the famous stackable Integra Leg system in Jett Black, Argent Silver or Nickel finishes or the highly polished black acrylic side block option. The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12V trigger and a C-19-type IEC.

16.550 €
36 Δόσεις 571,36€ / μήνα
Κατόπιν Παραγγελίας

DescriptionInnovative clean-power technologies and custom components within our stereo power amplifiers are what have propelled the Chord ULTIMA series to legendary status in and outside the recording studio. Their ability to instantaneously react and deliver sheer power, whilst maintaining transparency and incredibly low distortion leaves you with nothing but a masterpiece.ULTIMA 5 is a progression of our most famous stereo power amplifier, the legendary SPM 1200 MK II (widely considered to be the definitive Chord Electronics amplifier).Now incorporating our latest-generation ULTIMA circuit topology, the new ULTIMA 5 is set to become a future classic. Considered to offer the ideal balance between performance and price, the ULTIMA 5 offers an impressively affordable 350 watts – enough to drive all but the most demanding loudspeakers.The ULTIMA 5 has built upon the inherent strengths of the SPM 1200 MK II and taken performance to the next level. By implementing our advanced dual-feed-forward error-correction, topology incorporating our own advanced concepts in ultra-high-frequency power supplies, we have been able to deliver supremely fast and powerful performance, with an extraordinarily high peak output current (the speed at which dynamic peaks can be delivered), bringing astonishing dynamics, timing accuracy and, as a result, unrivaled musicality.Add to that our low-distortion amplifier circuitry with our own proprietary lateral-structure dual-die MOSFETs and the ULTIMA 5 is able to drive loudspeaker loads effortlessly, with clarity and precision. The ULTIMA 5 has an incredible 32 proprietary MOSFET power devices which demand the most advanced and refined drive circuitry, suitably devoid of sound-degrading components.ULTIMA is a truly unprecedented amplifier topology with exceptional performance and is one of the most advanced amplifier technologies in the world.Benefiting from a redesigned fascia featuring John Franks’ latest aesthetic, the precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet, hidden front panel switch, located in the vertical split line, enables dimmable lighting.The amplifier’s rear panels contain both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12 V trigger and a C-19-type IEC.

15.200 €
36 Δόσεις 524,76€ / μήνα
Κατόπιν Παραγγελίας

DescriptionInnovative clean-power technologies and custom components within our stereo power amplifiers are what have propelled the Chord ULTIMA series to legendary status in and outside the recording studio. Their ability to instantaneously react and deliver sheer power, whilst maintaining transparency and incredibly low distortion leaves you with nothing but a masterpiece.ULTIMA 5 is a progression of our most famous stereo power amplifier, the legendary SPM 1200 MK II (widely considered to be the definitive Chord Electronics amplifier).Now incorporating our latest-generation ULTIMA circuit topology, the new ULTIMA 5 is set to become a future classic. Considered to offer the ideal balance between performance and price, the ULTIMA 5 offers an impressively affordable 350 watts – enough to drive all but the most demanding loudspeakers.The ULTIMA 5 has built upon the inherent strengths of the SPM 1200 MK II and taken performance to the next level. By implementing our advanced dual-feed-forward error-correction, topology incorporating our own advanced concepts in ultra-high-frequency power supplies, we have been able to deliver supremely fast and powerful performance, with an extraordinarily high peak output current (the speed at which dynamic peaks can be delivered), bringing astonishing dynamics, timing accuracy and, as a result, unrivaled musicality.Add to that our low-distortion amplifier circuitry with our own proprietary lateral-structure dual-die MOSFETs and the ULTIMA 5 is able to drive loudspeaker loads effortlessly, with clarity and precision. The ULTIMA 5 has an incredible 32 proprietary MOSFET power devices which demand the most advanced and refined drive circuitry, suitably devoid of sound-degrading components.ULTIMA is a truly unprecedented amplifier topology with exceptional performance and is one of the most advanced amplifier technologies in the world.Benefiting from a redesigned fascia featuring John Franks’ latest aesthetic, the precision CNC-machined fascia is made from aircraft-grade aluminium and features a reassuringly solid 28-mm thick front panel, enhanced by a recessed spherical polycarbonate power button that illuminates for standby and operation modes; a discreet, hidden front panel switch, located in the vertical split line, enables dimmable lighting.The amplifier’s rear panels contain both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12 V trigger and a C-19-type IEC.

15.200 €
36 Δόσεις 524,76€ / μήνα
Κατόπιν Παραγγελίας

DescriptionInnovative clean-power technologies and custom components within our stereo power amplifiers are what have propelled the Chord ULTIMA series to legendary status in and outside the recording studio. Their ability to instantaneously react and deliver sheer power, whilst maintaining transparency and incredibly low distortion leaves you with nothing but a masterpiece.The ULTIMA 6 currently offers the most affordable way into our next-generation ULTIMA family of stereo power amplifiers. It builds upon its award-winning predecessor, the SPM 1050 MK II, adding our ground-breaking next-generation ULTIMA amplifier topology.The new 180-watt model, which benefits from John Franks’ ground-breaking dual-feed-forward circuit delivers a lightning-fast response coupled with effortless power for astonishing dynamics and timing, delivering unrivalled fidelity.30-years-in-the-making, our new dual-feed-forward topology offers breakthrough performance and is our first all-new circuit in three decades. ULTIMA amplifiers have been engineered for the very finest hi-fi systems; ULTIMA is the ultimate expression of the finest high-performance, ultra-fast, high-power amplifier technology available today.The ULTIMA 6 has an incredible 16 proprietary MOSFET power devices which demand the most advanced and refined drive circuitry, featuring an ultra-low-distortion, high-voltage amplifier operating at very high speed: 300 volts per microsecond.Our TO3-style dual-die lateral-matched MOSFETs are continuously monitored with output stage error-correction circuitry and feature fully balanced input circuitry with DC-tracking servos and full temperature compensation.ULTIMA 6 shares the same DNA as the flagship and reference-level monos, yet benefits from greater practicality and affordability, due to a differing power output.Our renowned aircraft-grade solid aluminium casework offers a reassuringly high-end and entirely non-resonant enclosure for the electronics and is presented with a redesigned 28-mm-thick fascia featuring John Franks’ latest aesthetic.A recessed spherical polycarbonate power button illuminates for standby and operation modes and a discreet, hidden front panel switch, located in the vertical split line, enables dimmable lighting.The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12 V trigger and a C-19-type IEC.

10.150 €
36 Δόσεις 350,41€ / μήνα
Κατόπιν Παραγγελίας

Description Innovative clean-power technologies and custom components within our stereo power amplifiers are what have propelled the Chord ULTIMA series to legendary status in and outside the recording studio. Their ability to instantaneously react and deliver sheer power, whilst maintaining transparency and incredibly low distortion leaves you with nothing but a masterpiece.The ULTIMA 6 currently offers the most affordable way into our next-generation ULTIMA family of stereo power amplifiers. It builds upon its award-winning predecessor, the SPM 1050 MK II, adding our ground-breaking next-generation ULTIMA amplifier topology.The new 180-watt model, which benefits from John Franks’ ground-breaking dual-feed-forward circuit delivers a lightning-fast response coupled with effortless power for astonishing dynamics and timing, delivering unrivalled fidelity.30-years-in-the-making, our new dual-feed-forward topology offers breakthrough performance and is our first all-new circuit in three decades. ULTIMA amplifiers have been engineered for the very finest hi-fi systems; ULTIMA is the ultimate expression of the finest high-performance, ultra-fast, high-power amplifier technology available today.The ULTIMA 6 has an incredible 16 proprietary MOSFET power devices which demand the most advanced and refined drive circuitry, featuring an ultra-low-distortion, high-voltage amplifier operating at very high speed: 300 volts per microsecond.Our TO3-style dual-die lateral-matched MOSFETs are continuously monitored with output stage error-correction circuitry and feature fully balanced input circuitry with DC-tracking servos and full temperature compensation.ULTIMA 6 shares the same DNA as the flagship and reference-level monos, yet benefits from greater practicality and affordability, due to a differing power output.Our renowned aircraft-grade solid aluminium casework offers a reassuringly high-end and entirely non-resonant enclosure for the electronics and is presented with a redesigned 28-mm-thick fascia featuring John Franks’ latest aesthetic.A recessed spherical polycarbonate power button illuminates for standby and operation modes and a discreet, hidden front panel switch, located in the vertical split line, enables dimmable lighting.The amplifier’s rear panel contains both balanced and unbalanced connections, high-quality loudspeaker terminals, a 12 V trigger and a C-19-type IEC.

10.150 €
36 Δόσεις 350,41€ / μήνα
Κατόπιν Παραγγελίας

DescriptionFeaturing technology derived from the aerospace industry, the Étude is an incredibly compact stereo amplifier with stunning power, speed and clarity.The multi-award winning Chord Electronics Choral family of products has never sounded so good. Welcome Étude to the table, a 150w Class AB stereo power amplifier featuring the first fundamentally new topology since Chord Electronics’ inception in 1989, using highly advanced technologies seen within the aerospace industry.The Choral Étude has been designed to both compliment and exploit the full potential of the multi-award winning DAVE DAC, which has preamp functionality, and the brand new topology has even faster power delivery than exiting designs, offering unrivalled dynamics, life-like delivery of transient information, plus effortless control over loudspeaker drive units.The design for Étude is based upon multi-feedback and dual feed-forward error-correction amplifier technology that intelligently adjusts and compensates the individual linearity of the 250-watt lateral structure high-power proprietary MOSFETs. Internally there are three individual high frequency switch mode power supply units, one for each active power rail and a final for the auxiliary rails. When paired with advanced internal shielding, active cooled plenum chamber design, and custom Chord Electronics MOSFETs, you have Étude, an world class extremely fast crystal clear amplifier.Although the amplifier is conservatively rated at 150W into 4Ω, if you run Étude in bridged mono mode you can increase this to 300W into 4Ω.

6.250 €
36 Δόσεις 215,77€ / μήνα
Κατόπιν Παραγγελίας

DescriptionFeaturing technology derived from the aerospace industry, the Étude is an incredibly compact stereo amplifier with stunning power, speed and clarity.The multi-award winning Chord Electronics Choral family of products has never sounded so good. Welcome Étude to the table, a 150w Class AB stereo power amplifier featuring the first fundamentally new topology since Chord Electronics’ inception in 1989, using highly advanced technologies seen within the aerospace industry.The Choral Étude has been designed to both compliment and exploit the full potential of the multi-award winning DAVE DAC, which has preamp functionality, and the brand new topology has even faster power delivery than exiting designs, offering unrivalled dynamics, life-like delivery of transient information, plus effortless control over loudspeaker drive units.The design for Étude is based upon multi-feedback and dual feed-forward error-correction amplifier technology that intelligently adjusts and compensates the individual linearity of the 250-watt lateral structure high-power proprietary MOSFETs. Internally there are three individual high frequency switch mode power supply units, one for each active power rail and a final for the auxiliary rails. When paired with advanced internal shielding, active cooled plenum chamber design, and custom Chord Electronics MOSFETs, you have Étude, an world class extremely fast crystal clear amplifier.Although the amplifier is conservatively rated at 150W into 4Ω, if you run Étude in bridged mono mode you can increase this to 300W into 4Ω.

6.250 €
36 Δόσεις 215,77€ / μήνα
Κατόπιν Παραγγελίας

DescriptionThe TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.The TToby has been designed to complement our desktop DAC/headphone amplifier, the Hugo TT 2 and shares the same compact form factor as its stablemate. The combination of our 1M-tap digital upscaling device M Scaler, Hugo TT 2 and TToby provides a high-quality hi-fi system, with desktop dimensions and a space-saving footprint. Despite its size, the TToby sets new standards for small amplifiers and takes full advantage of Chord Electronics’ proprietary amplification technology and design know-how.The addition of TToby, enables owners of the Hugo TT 2 to fully exploit the device as a ‘digital preamp’, effortlessly driving a wide variety of loudspeakers, large or small, in addition to the Hugo TT 2’s headphone prowess. The TToby is a 100-watt design, featuring both an unbalanced and balanced input, to take advantage of the Hugo TT 2’s XLR output.TToby features two of our famous high-frequency power supplies and benefits from forced air-cooling through the aluminium casework by means of a sonically closed anechoic miniature multi-speed quadruple-fan plenum chamber, enabling the external design to be free of sharp heatsinks and, therefore, carry a stunning aesthetic. The M Scaler/Hugo TT 2/TToby combination offers both class-leading DAC and amplification technology via headphones and loudspeakers, giving complete flexibility within the demands of busy households.

3.700 €
36 Δόσεις 127,74€ / μήνα
Κατόπιν Παραγγελίας

DescriptionThe TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.The TToby has been designed to complement our desktop DAC/headphone amplifier, the Hugo TT 2 and shares the same compact form factor as its stablemate. The combination of our 1M-tap digital upscaling device M Scaler, Hugo TT 2 and TToby provides a high-quality hi-fi system, with desktop dimensions and a space-saving footprint. Despite its size, the TToby sets new standards for small amplifiers and takes full advantage of Chord Electronics’ proprietary amplification technology and design know-how.The addition of TToby, enables owners of the Hugo TT 2 to fully exploit the device as a ‘digital preamp’, effortlessly driving a wide variety of loudspeakers, large or small, in addition to the Hugo TT 2’s headphone prowess. The TToby is a 100-watt design, featuring both an unbalanced and balanced input, to take advantage of the Hugo TT 2’s XLR output.TToby features two of our famous high-frequency power supplies and benefits from forced air-cooling through the aluminium casework by means of a sonically closed anechoic miniature multi-speed quadruple-fan plenum chamber, enabling the external design to be free of sharp heatsinks and, therefore, carry a stunning aesthetic. The M Scaler/Hugo TT 2/TToby combination offers both class-leading DAC and amplification technology via headphones and loudspeakers, giving complete flexibility within the demands of busy households.

3.700 €
36 Δόσεις 127,74€ / μήνα
Κατόπιν Παραγγελίας

Two-Channel Revolution.The STR Power Amplifier is the beating heart of a world-class 2-channel sound system. It delivers massive power generation, with audiophile-quality output in a smartly designed component.Designed, engineered, and Crafted in Canada, the STR Power Amplifier delivers 400 Watts/channel into 8 ohms with both channels driven, a massive 600 Watts/channel into 4 ohms (both channels driven) and 800W in 2 ohms, for true no-holds-barred performance.Inside, the STR Power Amplifier uses two colossal transformers and multiple high-current output devices so the most subtle details and dynamic peaks are handled equally well. Outside, its beautifully designed cosmetics, including a 7-inch graphic control display and secure, highly conductive audiophile connectors provide a perfect match to the STR Preamplifier.Advanced Load Monitoring™ TechnologyExclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted long-term operation. ALM is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier and speakers from damage, while lowering the chance of a line fuse blowing during an over-current condition. The front panel display confirms status at all times.More DetailsMassive Toroidal Power SuppliesThe STR Power Amplifier delivers incredible dynamics thanks to a massive, conservatively rated (and “audiophile approved”) power supply, designed with high rail voltages. The advanced-generation toroidal power transformers minimize stray magnetic field radiation and ensure ultra-quiet performance. The resulting power is pure, clean, low-noise; capable of effortlessly and instantly reproducing the full dynamics of even the most complex audio recordings.Hand-Built Quality ComponentsAnthem STR Power Amplifiers are designed, engineered, and Crafted in Canada. From the idea stage to the final manufacturing specs, we have complete control over the whole intricate process. We take pride in this personal attention to detail, and use only the highest quality components, many designed and engineered in-house, in each new STR Power Amplifier we hand-build for your enjoyment.Audiophile Binding PostsBig power demands big connections, and our custom-designed oversized five-way binding posts give you the flexibility you need for even large-gauge bare-wire connections. Insulated, non-conductive, color-coded jackets make easy, fast, and solid connections with no interference or ghosting.Performance That’s Rock SolidAnthem amplifiers go where other amplifiers fear to tread, with a well-earned reputation for being incredibly stable under difficult, low-impedance speaker loads. Short path design and redundant systems (with Advanced Load Monitoring and other exclusive protective technologies) ensure that peaks are surmounted effortlessly, guaranteeing a long life of high performance.

7.799 €
36 Δόσεις 269,25€ / μήνα
Κατόπιν Παραγγελίας

Two-Channel Revolution.The STR Power Amplifier is the beating heart of a world-class 2-channel sound system. It delivers massive power generation, with audiophile-quality output in a smartly designed component.Designed, engineered, and Crafted in Canada, the STR Power Amplifier delivers 400 Watts/channel into 8 ohms with both channels driven, a massive 600 Watts/channel into 4 ohms (both channels driven) and 800W in 2 ohms, for true no-holds-barred performance.Inside, the STR Power Amplifier uses two colossal transformers and multiple high-current output devices so the most subtle details and dynamic peaks are handled equally well. Outside, its beautifully designed cosmetics, including a 7-inch graphic control display and secure, highly conductive audiophile connectors provide a perfect match to the STR Preamplifier.Advanced Load Monitoring™ TechnologyExclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted long-term operation. ALM is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier and speakers from damage, while lowering the chance of a line fuse blowing during an over-current condition. The front panel display confirms status at all times.More DetailsMassive Toroidal Power SuppliesThe STR Power Amplifier delivers incredible dynamics thanks to a massive, conservatively rated (and “audiophile approved”) power supply, designed with high rail voltages. The advanced-generation toroidal power transformers minimize stray magnetic field radiation and ensure ultra-quiet performance. The resulting power is pure, clean, low-noise; capable of effortlessly and instantly reproducing the full dynamics of even the most complex audio recordings.Hand-Built Quality ComponentsAnthem STR Power Amplifiers are designed, engineered, and Crafted in Canada. From the idea stage to the final manufacturing specs, we have complete control over the whole intricate process. We take pride in this personal attention to detail, and use only the highest quality components, many designed and engineered in-house, in each new STR Power Amplifier we hand-build for your enjoyment.Audiophile Binding PostsBig power demands big connections, and our custom-designed oversized five-way binding posts give you the flexibility you need for even large-gauge bare-wire connections. Insulated, non-conductive, color-coded jackets make easy, fast, and solid connections with no interference or ghosting.Performance That’s Rock SolidAnthem amplifiers go where other amplifiers fear to tread, with a well-earned reputation for being incredibly stable under difficult, low-impedance speaker loads. Short path design and redundant systems (with Advanced Load Monitoring and other exclusive protective technologies) ensure that peaks are surmounted effortlessly, guaranteeing a long life of high performance.

7.799 €
36 Δόσεις 269,25€ / μήνα
Κατόπιν Παραγγελίας

Performance From The HeartIn life we admire “heart.” When we say someone has heart we mean passion, spirit, fortitude. And we applaud it. While the amplifier is the brawn behind every successful music and movie presentation, it is also the heart! Its role is as crucial as that of the speakers in its ability to render delicate musical detail one moment and deliver room-shaking explosions the next. The most exquisite piece of music falls flat without clean, quiet power to sustain it through to its natural, musical ebb. Movie special effects require an inordinate supply of stable, high current power to give visceral credibility to the “special” aspect of each effect! In fact, all truly successful sound reproduction requires “heart.” The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel; custom-designed convection-cooled heatsinks with serrated fins; a “no-fuse” design strategy. And the list goes on.

6.529 €
36 Δόσεις 225,40€ / μήνα
Κατόπιν Παραγγελίας

Designed to match, engineered for power.New MCA multi-channel amplifiers are Crafted in Canada and perfectly match the new AVM 60 processor & MRX receivers.To complement the NEW AVM 60 A/V Processor, Anthem introduces the new MCA 525, 325 and 225 power amplifiers. Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background.Like all Anthem products the MCA 525, MCA 325 and MCA 225, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; advanced power supply regulators; oversized aluminum heatsinks; custom-designed dual binding posts; and patented auto-on/off circuitry. Superior craftsmanship that is reflected in clean, clear, audiophile-quality sound from top to bottom of the frequency spectrum.An All New MCA SeriesWhat does it take to improve on perfection? Over 15 years of concentration. The distillation of endless hours of fundamental research. The willingness to rebuild from the ground up. And the focus on a single goal: Leadership through innovation and technology. Introducing the new generation of Anthem MCA Amplifiers, designed, engineered and manufactured in Canada!Completely RedesignedThe new MCA series greatly reduces the use of internal cabling for a much smoother circuit path for pure, unobstructed audio performance. The use of low-flux toroidal transformers and improved input transistors provide a greater sense of transparency, even with dynamically complex material.We’ve also improved other performance benchmarks including power bandwidth and slew rate. With a signal-to-noise ratio of 120 dB, background noise is practically nonexistent, leaving you with just pure natural sound reproduction.Higher Power into More Demanding LoadsExperience the immense dynamics of up to 600 clean Watts delivered into demanding 2-Ohm loads. Both power supply impedance and internal cabling inductance have been minimized to deliver a clear path for maximum power – even in the most demanding conditions. While previous 5-channel MCA amps used a single power supply for front left and right channels and another power supply of the centre and surround, the new MCA 525 shares its two power supply between all channels. The result is full bursts of power – instantly – without affecting channel separation.Next generation Advanced Load Monitoring™ TechnologyExclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted longterm operation, all the while eliminating the need for internal fuses. ALM™ is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier (and speakers) from damage.This new generation ALM™ lowers the chance of a line fuse blowing during an over-current condition. Should a fault condition arise, unaffected channels continue to play and all-channel operation resumes automatically once conditions are back to normal. The LED on the front panel confirms status at all times.Engineered for ReliabilityThe new generation of MCA Amplifiers uses of Anthem’s years of experience to “engineer out” common amplifier gremlins. Consequently, we’ve removed output relays, so the signal path has absolutely no moving parts. All parts, including the eight bipolar output transistors per channel, are run conservatively so they remain within their safe operating range. Power-on inrush current has been minimized to reduce line disturbances and stress on internal components. We’ve also upgraded internal connectors and increased mechanical strength.Green “Standby” Power ConsumptionIn addition to the reduced inrush current, these new MCA Amplifiers only use between 1-2W in “standby” mode. As with all Anthem amplifiers, they can be switched on manually, via trigger, or by sensing an input signal. New, larger, more conductive audiophile binding posts have been added to maximize contact and maintain a firm grip on the speaker cable. If you’re in the market for cutting-edge audio component separates, Anthem’s new MCA Amplifiers balance the complex dynamics of today’s most demanding multi-channel media with the rare finesse required to satisfy the audiophile in you. MCA Amps provide an abundance of conservatively rated power into demanding low impedance loads, incredible reliability, and a new design aesthetic that matches our sleek AVM 60 Pre-Amplifier.Massive Toroidal Power SuppliesMCA amplifiers deliver incredible dynamics thanks to massive “audiophile approved” conservatively rated power supplies designed with high rail voltages. Low flux toroidal power transformers ensure ultra quiet performance by minimizing stray magnetic field radiation. This provides the pure, clean, low-noise power that is needed to reproduce the full dynamics of home theater and the most complex and dynamic music recordings.Quality ComponentsAnthem MCA amplifiers are designed, engineered, and completely Crafted in Canada. We take pride in using only the highest quality components for each one we hand-build.Audiophile Binding PostsOur own custom-designed, oversized robust binding posts ensure full power delivery at all times. They’re easy to use and facilitate large speaker cable connectors.Stable as a RockOur amplifiers are incredibly stable into difficult, low-impedance speaker loads, making these superb-sounding dynamos reliable performers in even the toughest circumstances.

3.150 €
36 Δόσεις 108,75€ / μήνα
Κατόπιν Παραγγελίας

1-Channel Solid State Amplifier : 1,200 Watt Quad Balanced Monoblock, Redesigned from top to bottomThe MC1.25KW Quad Balanced Power Amplifier is one of our most advanced amplifiers. Redesigned from top to bottom, it replaces the venerable MC1.2KW as our most powerful single chassis monoblock amplifier. A simple glance at this 158 pound (71.7 kg) amp is enough to convey its power and performance capabilities, but when you hear it – then you’ll truly understand what it can do.The MC1.25KW outputs 1,200 Watts of pure power into a single channel with a nearly imperceptible total harmonic distortion of 0.005%. This astonishing amount of power is fully available to 2, 4 or 8 Ohm speakers our Autoformer™ technology. A pair of these amps can anchor a home audio system that can rival nearly any stereo system in the world.Updates and enhancements abound in the MC1.25KW. A 50% increase in filter capacity improves the performance of low end frequencies as well as increasing dynamic headroom. The top of the amp showcases an updated yet unmistakable McIntosh industrial design that will fit right in with current McIntosh products or those made decades ago. The audio Autoformer and power transformer remain located just behind the front panel but are now contained in new glass topped enclosures. In between them is new circular glasswork housing the amplifier’s name badge that is adorned with a decorative trim ring.The rear of the unit features 4 of our McIntosh Monogrammed Heatsinks™. Made from high quality materials with excellent thermal conductivity properties, these heatsinks are so efficient at dissipating heat that they warrant bearing the McIntosh “Mc” logo. They connect to advanced high current output transistors that eliminate thermal equilibrium lag time so that the first musical note played sounds just as good as songs played later in your listening session. The heatsinks are capped with handsome ventilation trim plates. These trim plates and the circular trim ring are made from aluminum and are finished to match the front panel handles.The AC receptacle has been repositioned to provide additional clearance so a wider assortment of power cords can more easily be used. All of this sits atop a polished stainless steel chassis which rests on 4 new redesigned feet that feature a chamfered edge. Other updates include an updated power transformer, heavier gauge internal wiring, upgraded circuit components, and the addition of our power management system that will turn the amp off after a set amount of time when no input signal has been detected.With all the changes and improvements made in the MC1.25KW, one thing that hasn’t changed is the large, fast responding 11” (27.9 cm) blue Watt meter that accurately shows the amp’s power output. Also unchanged is the signature black glass front panel with control knobs, illuminated logo, and aluminum end caps with handles. The front panel and meter have new direct LED backlighting for improved appearance and color accuracy.Other exclusive McIntosh features included in the MC1.25KW include:Power Guard® that monitors and adjusts the output signal at the speed of light and makes real time adjustments to prevent harsh sounding and potentially speaker damaging clippingSentry Monitor™ - our fuse-less short-circuit protection circuit that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normalQuad Balanced design that cancels virtually all noise and distortion that may have crept into the audio signalPower Control to send power on/off signals to other connected McIntosh components (such as CD Players, turntables, tuners and media streamers) for easy system power up and shutdownOur patented Solid Cinch™ speaker binding posts that easily but securely attach the speaker cables to prevent them from coming loose and possibly causing a short; the binding posts are also gold-plated to prevent corrosion and ensure a quality signal is sent over your speaker cables

19.380 €
12 Άτοκες Δόσεις 1.615,00€ / μήνα
Κατόπιν Παραγγελίας

RB-1552 MkII is built upon the same platform as the RB-1582 MkII with only a slightly smaller power output capability at 2 x 130 Watts. The RB-1552 MkII is a 130 Watt per channel class AB amplifier. It is engineered to be powerful and robust, yet able to extract every last nuance out of even the most complex musical score.  Notable features of the amplifier include independent left and right power rectification stages and decoupling. The layout is essentially a mono block design. Further evidence of design over-spec is in the selection of premium “slit-foil” capacitors, which provide plenty of reserve energy for extremely dynamic audio passages and are able to quickly replenish themselves due to the nature of their unique design. Input options are balanced XLR or unbalanced RCA connectors. The RB-1552 MkII stereo amplifier has been engineered to provide high-resolution audio performance, yet it is very affordable, as has been the tradition with Rotel electronics for over 50 years.

1.249 €
36 Δόσεις 43,12€ / μήνα
Κατόπιν Παραγγελίας

RB-1552 MkII is built upon the same platform as the RB-1582 MkII with only a slightly smaller power output capability at 2 x 130 Watts. The RB-1552 MkII is a 130 Watt per channel class AB amplifier. It is engineered to be powerful and robust, yet able to extract every last nuance out of even the most complex musical score.  Notable features of the amplifier include independent left and right power rectification stages and decoupling. The layout is essentially a mono block design. Further evidence of design over-spec is in the selection of premium “slit-foil” capacitors, which provide plenty of reserve energy for extremely dynamic audio passages and are able to quickly replenish themselves due to the nature of their unique design. Input options are balanced XLR or unbalanced RCA connectors. The RB-1552 MkII stereo amplifier has been engineered to provide high-resolution audio performance, yet it is very affordable, as has been the tradition with Rotel electronics for over 50 years.

1.249 €
36 Δόσεις 43,12€ / μήνα
Κατόπιν Παραγγελίας

Featuring 6 x 50 watts per channel, the RMB-1506 is a rugged, sophisticated, multichannel amplifier for those with a limited number of zones to fill with music. The RMB-1506 is perfect for less elaborate multizone audio systems and can be mated with our surround receiver or our preamp/processors to add music throughout three additional living areas or “zones” of your home. A buffered link output allows you to link additional amplifiers for larger multizone applications. As with all Rotel custom amplifiers it includes the most wanted custom installation features such as front panel attenuation control, input linking, 12-volt trigger, buffered link output, five-way binding posts and an IEC detachable power cord.

1.349 €
36 Δόσεις 46,57€ / μήνα
Κατόπιν Παραγγελίας

Featuring 6 x 50 watts per channel, the RMB-1506 is a rugged, sophisticated, multichannel amplifier for those with a limited number of zones to fill with music. The RMB-1506 is perfect for less elaborate multizone audio systems and can be mated with our surround receiver or our preamp/processors to add music throughout three additional living areas or “zones” of your home. A buffered link output allows you to link additional amplifiers for larger multizone applications. As with all Rotel custom amplifiers it includes the most wanted custom installation features such as front panel attenuation control, input linking, 12-volt trigger, buffered link output, five-way binding posts and an IEC detachable power cord.

1.349 €
36 Δόσεις 46,57€ / μήνα
Κατόπιν Παραγγελίας

Music everywhere with 8 x 50 watts per channel is the purpose of our rack mountable RKB-850. Rotel has been designing and manufacturing award-winning power amplifiers for over 50 years. That considerable expertise has now been applied to a new generation of rackmount custom installation amplifiers that set new standards for performance, reliability, and ease of installation. The RKB-850 is rated at 8 x 50 Watts RMS into 8 ohms all channels driven, and can double that output into 4 ohms as a result of its sophisticated, efficient Class D design. The amplifier is rugged and extremely reliable, but Rotel has gone one step further to maximize long service life by utilizing dual thermostatically controlled fans to exhaust heat away from the output modules and power supply. One of the many custom-friendly features the RKB-850 offers is input linking. A second input can source from any ‘upstream’ input - so B can source from A, C can source from B and D can source from C. You can create four individual stereo zones, two dual zones or three common zones plus an individual zone. In other words, two Sonos Connects (for instance) might be divided between kitchen and patio (A+B zones) and Master Bedroom and Bath (C+D). Other features include input signal sensing, buffered link output, a sum-to-mono feature, a rear panel RS232 connection allowing connection to automation systems to provide full control and feedback, and four front panel trim pots to allow easy level adjustment to balance zones.

1.400 €
36 Δόσεις 48,33€ / μήνα
Κατόπιν Παραγγελίας

Τηλεχειριζόμενος προ-ενισχυτής, με διπλό τοροειδή μετασχηματιστή. DAC 32bit/768kHz, Θύρα RS-232, Bluetooth with aptX, 12V trigger, USB for Apple iOS devicesx

1.690 €
36 Δόσεις 58,34€ / μήνα
Κατόπιν Παραγγελίας

Τηλεχειριζόμενος προ-ενισχυτής, με διπλό τοροειδή μετασχηματιστή. DAC 32bit/768kHz, Θύρα RS-232, Bluetooth with aptX, 12V trigger, USB for Apple iOS devicesx

1.690 €
36 Δόσεις 58,34€ / μήνα
Κατόπιν Παραγγελίας

RMB-1512 is the ideal whole-house music amplifier with 12 x 100 Watts per channel. No longer do you need to purchase several large amplifiers to obtain a high performance multizone audio system. The RMB-1512 features an advanced Class D design that provides plenty of power (12 x 100 Watts into 8 ohms) for the most demanding multizone audio systems, but never runs the danger of overheating itself or other electronic components placed in the same vicinity. The RMB-1512 features everything needed for remote operation and custom installation including 12 volt trigger, signal sensing, input bussing, sum-to-mono, buffered link output, front panel attenuation controls, five-way binding posts and screw terminals.

2.500 €
36 Δόσεις 86,31€ / μήνα
Κατόπιν Παραγγελίας

The A2700 power amplifier is the perfect partner for the P1 pre-amplifier. The Elipson A2700 power amplifier is a high-end model capable of delivering a high power output of 400 W RMS under 8 ohms in stereo mode or 1400 W RMS under 8 ohms in mono mode. The Elipson A2700 power amp is thus able to give life and energy to any pair of floorstanding or bookshelf speakers. Its association with a preamplifier is also facilitated by its unbalanced RCA and balanced XLR inputs. It amplifies any signal in its entirety with disconcerting ease thanks to its high amplification capacity: 400 W RMS under 8 Ohms, 700 W RMS under 4 Ohms and especially 900W in impulse mode under 2 Ohms. Modular, it can be bridged in mono and offer 1400 W RMS (2500 W peak) under 8 Ohms, and this, without thermal runaway So this amplifier can drive all the speakers of the market. Beyond its power and its modularity, it is also the techniques used that impress: oriented towards the minimisation of background noise and distortion, as these are essential elements in the respect of the intensity of the notes in the service of musicality. An iron fist in a velvet glove, that's really what characterizes our amplifier, allowing you to find the live experience of a concert in all its complexity and finesse. Our range is entirely made in France in our Burgundy factory.

2.990 €
12 Άτοκες Δόσεις 249,17€ / μήνα
Κατόπιν Παραγγελίας