. go to top icon

M2Tech

Όλα τα προϊόντα M2Tech

Φίλτρα
6  Προϊόντα

The Young MkIV gives you total control of the music flowing from your sources to the amplifier and then to the speakers. With a wealth of input channels and extensive control options, you have always full command on your audio system, with the greatest confidence that the quality of the original music material is delivered to the speakers without any detriment. Whether your source is a computer, a smartphone, a DVD player or a turntable, the Young MkIV delivers a crisp and alive analog sound at its outputs, to drive any amplifier at best. You control it by the front panel encoder, using the remote control or by your Android smartphone via the same wireless connection which allows you to stream audio. Streaming lovers will enjoy the high quality ensured by MQA©, while smartphone users will take advantage of aptX. M2Tech has adopted MQA to support master quality playback and streaming. MQA is an innovative encoding algorithm that captures the original master sound quality; ‘folds’ the file into a smaller size for easy streaming or download; and authenticates the file when it plays back on an MQA-enabled device. M2Tech recognizes the sonic and technical advantages of MQA, therefore all M2Tech DAC products will include MQA in their format decoding pool. Inputs: Analog single-ended (RCA)S/PDIF (RCA)AES/EBU (XLR)Optical (Toslink)USB 2.0 high speedBluetooth©I2S (HDMI, PS Audio standard) Outputs: Analog balanced (XLR)Analog single-ended (RCA)Trigger (jack 3.5mm) Sample frequencies: PCM 44.1kHz to 768kHzDoP 64X to 256XNative DSD 64x to 512x PCM resolution: 16 bits to 32 bits Signal-to-Noise Ratio: 122dBA (single-ended and balanced) THD+N: 0.0008% @ 5Vrms out balanced Output Voltage: 2.5Vrms or 5Vrms (single-ended)5Vrms or 10Vrms (balanced)5.5Vrms (headphones)12VDC (trigger) Output impedance: 100 Ohms (single-ended)200 Ohms (balanced) Input impedance: 47 kOhms (analog)75 Ohms (SPDIF)110 Ohms (AESEBU)100 Ohms (I2S) Supply voltage: 15VDC Power Consumption: 5.7W (operational)0.15W (standby) Size: 200x200x50mm (wxdxh) Weight: net 2kg (including ancillaries)gross 2.5kg

2.499 €
36 Δόσεις 86,27€ / μήνα
Κατόπιν Παραγγελίας

The Crosby is a versatile high efficiency class-D stereo power amplifier which doesfor a perfect pair with the Young MkIII, both in size and sound. Its clean power is enough for most speakers, while its drive capability can be improved by setting it in bridge mode.In this case, the Crosby becomes a powerful mono amplifier; two Crosby in bridge mode can drive virtuallyevery speaker, be it an array of dynamic drivers or an electrostatic panel. Of course, the Crosby can be attached to every preamplifier, not only to the Young MkIII.It is provided with both single-ended and balanced inputs, plus trigger input/pass-through. Thanks to its class-D design, it is virtually impossible to destroy,all overload situations are reported on the front panel. Specifications : Inputs:single-ended (RCA)balanced (XLR)trigger (3.5mm jack) Outputs:speakers (posts)trigger pass-through (jack 3.5mm) Sensitivity:1.25Vrms5V (trigger) Input impedance:47 kOhms (single-ended)20 kOhms (balanced) Signal-to-Noise Ratio:115dBA (stereo)118dBA (bridged) THD+N:0.005% @ 60Wpc out on 8 Ohms Output Power Before Clipping:60Wpc (stereo, 8 Ohms)110Wpc (stereo, 4 Ohms)180W (bridged, 8 Ohms) Supply voltage:100-130VAC or 200-240VAC, 50/60Hz Power Consumption:615W (440Wpc on 4 Ohms mono)1.5W (standby) Size:200x200x50mm (wxdxh) Weight:net 3kg (including ancillaries)gross 3.5kg

1.390 €
Άτοκες Δόσεις 463,33€ / μήνα
Κατόπιν Παραγγελίας

Extremely Low Noise Power Supply When it comes to high audio performance, the quality of the current being delivered to a hi-fi unit is overly important. Noise in the supply current may be injected into the sound or couple with critical circuits, like the clock, leading to less-than-optimal performance. A low noise supply is therefore mandatory to squeeze the last bit of sound quality out of your DAC or amplifier. Of course, a low noise design involves quality, room occupation and cost way beyond those acceptable in budget designs. That’s why M2Tech offers the Van Der Graaf MkII: users who purchased the Young MkIII and the Nash Phono Preampmplifier may later allocate some more budget to increase their performance by adding the Van Der Graaf MkII. Extremely easy to use, its benefits go from the higher stability of the clocks (with related increased soundstage sharpness and details rendition) to a darker background due to the lower noise floor. The Van Der Graaf MkII remembers the order user followed to activate the four outputs: when switching off, it follows the reverse order and remember the activation order upon subsequient switch-on. The Van Der Graaf MkII is provided with an IR receiver and is able to trap the ON/OFF commands from the remote controllers of all other Rockstars Series units. This allows user to power all the attached units on and off with a single command with the right switching order. Specifications : Input:90-265VAC, 50/60Hz (VDE socket) Outputs:2 x 9VDC or 15VDC (5.5/2.1mm jack)2 x 5VDC:+15VDC:-15VDC (4-pin XLR) Total output power:50W Residual noise:3uVrms (5Hz to 22kHz) Power consumption:60VA Size:200x200x50mm (wxdxh) Weight:net 3kg (with ancillaries)gross 3.5g

989 €
36 Δόσεις 34,14€ / μήνα
Κατόπιν Παραγγελίας

The Nash is a dedicated preamplifier and phono equalizer for every cartridge model. It is provided with two phono inputs, one for low-level MC cartridges and one for medium-high level MC cartridges and MM cartridges. Its FET-input, all-discrete components circuits feature vanishingly low noise and plenty of gain, allowing for a stunning 2.5Vrms output with 5mV on MM and 170uV on MC. The passive RIAA is implemented with high precision polypropylene capacitors. MC interface paramenters (input impedance and MC pre-pre gain) are set by potentiometer from the rear panel. As well, MM interface parameters (input impedance and capacity load) are set by DIP-switches, again from the rear panel. The Nash is provided with a Bluetooth BLE interface for control and configuration. An Android (and soon iOS) app will allow user to fully control the unit and set the configuration parameters. A comprehensive, continuously updated pickups database will make configuration faster and easier. You control the Nash by the front panel encoder, using the remote control or by the dedicated Android app via Bluetooth. Operation data are displayed on a high readability OLED display. A menu allows for setting parameters like: anti-rumble filter, MM input stage gain, etc. Two auxiliary line-level inputs make the Nash a hub or switching box for analog sources, an interesting add-on when the Nash is used together with the Young MkIII, to fully exploit the latter’s only analog input. A Young MkIII-Nash-based system may have a total of four analog sources: two phono and two line-level. The Nash noise and sound performance can be further increased by replacing the stock wall adaptor with the Van Der Graaf MkII Low Noise Power Supply. Specifications : Output Voltage:2.5Vrms (MM, 5mV input, 55dB gain) Inputs:phono MC (RCA)phono MM (RCA)2 x line-level (RCA)external power supply (4-pin XLR)trigger (3.5mm jack) Outputs:equalized line-level (RCA)trigger pass-though (jack 3.5mm) MM gain:55dB60dB65dB MC pre-pre gain:3dB to 30dB Total MC gain:58dB to 95dB MC Input impedance:10 Ohms to 50 kOhms MM Input impedance:47 kOhms15 kOhms MM Input capacitance:0pF100 pF220 pF330 pFany combination of the above Signal to noise ratio:85dBA (MM, 60dB gain)78dBA (MC, 70dB gain) Output impedance:5 Ohms Trigger input voltage:5V to 12V Supply voltage:15VDC (stock adaptor input)+5VDC;+15VDC;-15VDC (external power supply input) Power Consumption:4W (operational)0.23W (standby) Size: 200x200x50mm (wxdxh) Weight:net 2kg (including ancillaries) gross 2.5kg

1.900 €
Άτοκες Δόσεις 316,67€ / μήνα
Κατόπιν Παραγγελίας

The Evo Supply Two is a very low noise 9V power supply dedicated to the Evo Two Series products. It is provided with three outputs which deliver clean current from a low noise, discrete components regulator. Outputs are switched with a rele operated by a button on the front panel. Overcurrent protection is included on each output.The very-low-noise regulator features the same basic design as the Van Der Graaf, ensuring a residual noise which rivals that of the best high current batteries, with the extra bonus of a very long trouble-free life.Χαρακτηριστικά:The Evo Supply Two has enough current capability to power any combination of Evo Two or legacy Evo products. A carefully thought design which allows for exceptional performance from the lightest load up to the rated current delivery.The output polyswitch fuse avoids damages even in case of continuous short-circuit at one or more outputs. 

460 €
36 Δόσεις 15,88€ / μήνα
Κατόπιν Παραγγελίας

hiFace DAC 384/32 φορητός ασύγχρονος ψηφιοαναλογικός μετατροπέας. Υποστηρίζει ασύγχρονη σύνδεση με τον υπολογιστή και αναπαραγωγή έως 384kHz-32 bits και μπορεί να συνδεθεί απευθείας με ενισχυτή ή ευαίσθητα ακουστικά. Είσοδος: USB. Έξοδος: stereo jack. Output voltage: 2.0Vrms @10kOhms. THD+N: 112dB (@ 1kHz, A-weighted) Συμβατότητα Windows:Direct Sound, Kernel Streaming, WASAPI και ASIO. Συμβατότητα Mac: Integer mode και Direct mode. Συμβατότητα Linux.Χαρακτηριστικά:Connections: Input 1 x USB A type maleOutput 1 x 3.5mm stereo jack socket
I/OStandard: Input USB 2.0 Audio Format, Output stereo analogSampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz, 352.8kHz, 384kHz
Resolution 16 up to 32 bitOutput voltage: 2.0Vrms @10kOhmsFrequency response: 5-22kHz (fs=44.1kHz) - 5-150kHz (fs=384kHz)THD+N: 112dB (@ 1kHz, A-weighted)Dimensions:8.8(d) x 1.4(h) x 2(w)
Power Supply:5V DC from USB bus
Temperature: 0°C to 70°C
Weight: 20gr approx.

170 €
36 Δόσεις 5,87€ / μήνα
Κατόπιν Παραγγελίας